9 best dozuki saw with blades

Product description

Ideal for extremely intricate and precise work, such as Dovetail, Tenon joint making. The finest blade of Z-saw Dozuki back saw series, ideal for extremely intricate and precise works on general wood materials.

• Dozuki Back Saw
• Rigid back insures accurate cuts
• Ideal for extremely intricate and precise work , such as Dovetail , Tenon joint making.
• Blade replaceable
• Imported from Japan

User questions & answers

Question:	Zett saw blade for dozuki z saw
Answer:	yes, and you merely tap the end of the old saw blade against wood, and it comes out. Very easy.
Question:	How do you change a dozuki z sawblade
Answer:	We do not recommend the use of the Breville® BBL002 Vac Q™ with any blender by any manufacturer other than those it is designed for by Breville®
Question:	Can this replacement blade be used in the Dozuki dovetail saw
Answer:	No, the Breville® BBL002 Vac Q™ is not compatible with the BBL605 Hemisphere Control™ Blender.

Product description

Japanese Dozuki Saw 6 inch Replacement Blade

• Japanese Dozuki Saw Replacement Blade

User questions & answers

Question:	Does this saw work well with hardwoods
Answer:	Yes, easily. My sister buys those cow tibia bones for her dog with filling in them. The dogs can only get to so much of it. After a while, we cut them in half. I've done it a number of times on one blade, no issues.
Question:	is this price for one thing
Answer:	The handle is made of soft white wood that is wrapped in bamboo (?) strips. Great saw!!
Question:	Will this cut through bone
Answer:	Dozuki "Z" Saw Replacement Blade is a disposable blade of Dozuki "Z" Saw.
Question:	What materials were used in making the handle for this saw? It is difficult to tell from the photos if the bands are bamboo, plastic or
Answer:	There are instructions on the packaging. You hold it with the blade up and whack the back of it on your work bench to pop it out of the holder. Align the hook of the new blade into the holder, then whack it again to firmly seat it. It was very easy.

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan,we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

Replacement Blade of Japanese Dozuki Dovetail Saw 9.5 inch

• Replacement Blade of Japanese Dozuki Dovetail Saw

Product features

Do you know about a “Japanese Pull Saw“?

Japanese saws cut materials via pulling and thus are called “pull saws.” It requires less power, realizes exceedingly smooth and accurate cut, and results that the cutting-section is clean. And particularly this saw's blade is sharper and thinner, and has a greater number of teeth per inch than comparable saws of its size.

MADE IN JAPAN BY JAPANESE CRAFTSMEN

All SUIZAN products are manufactured in Japan by Japanese master craftsmen. While many other makers in Japan have shifted to creating products outside of Japan, we continues to plan, create trial products, and carry out product tests in our factory and are able to incorporate the fresh and new opinions of craftsmen. This allows us to ensure our high quality in our products.

Easy to interchange

The blades are easily removable and interchangeable. Links of blades are in all product links so you can easy to find them.

Over Fifty Thousand woodworkers Have Switched to SUIZAN

Over fifty thousand woodworkers, from executive woodworkers like professional carpenter, furniture maker, musical instrument makers to home carpentry and everyone in between, have switched to SUIZAN for our superior quality, unconditional support, and loyal community, and SUIZAN users are treated like family.

What is SUIZAN?

SUIZAN, a Japanese brand, creates the highest quality Japanese hand tools. With a history of over 100 years, all of the processes are completed in one of Japan’s town known for their craftsmanship: Sanjō in Niigata prefecture. That’s why our products are highly appreciated by many woodworkers.

A Brand Ambassador of SUIZAN

Jonathan Katz-Moses is an entrepreneur, inventor, and content creator with a lust for teaching only surpassed by his love for coming up with unique solutions to everyday problems. His love for making things has been a life long addiction and in 2014 he decided he needed to chase that dream. Jonathan shares his love for woodworking on his self titled YouTube Channel and has invented several woodworking tools that can be found in 157 countries around the world. He is the inventor of The Katz-Moses Magnetic Dovetail Jig and The Katz-Moses No Deflection Stop Block. Jonathan produces a segment on his YouTube Channel called "Joint of the Week" where he showcases different joinery techniques using SUIZAN Saws.

Product description

Extra blade fits Razor saw Dozuki Wide 240. [Features] 0.3mm ultra-thin blades gives a sharp cutting edge and a cut which does not require another finishing. It can be used for cutting thick wood up to 6mm in depth with its wide blade. [Material] Blade: SK material, Handle: Wood with rattan roll. Gyokucho is the premier Japanese manufacturer of high quality saws with a reputation for reliability and good performance at a modest price. We use a method called impulse hardening to increase the durability of the tooth tips. The cutting edge is heated for 0.003 to 0.005 seconds by applying an electrical current at super high-frequency of 27.12Mhz, instantly hardening the surface of the steel while maintaining the flexibility inside. As a result, the sawfs wear resistance increases. The surface hardness of the blade is approximately from Hv 900 to 1200. The hardened saw tooth is much harder than sharpening files so the blade cannot be sharpened and needs to be replaced once it is dull. All products have a name, blade thickness, the blade length, and even the extra blade part number marked on themselves. The marking is done by a laser irradiation method and won't wear off. So even when you lose the package, you can easily identify the products by checking its laser marking. Electro less nickel plating prevents the blade from rusting, and there is no need to worry cutting materials getting dirty with the rust. Also tree tar is hard to stick to the blade, and even if it does, you can wash it off with water. Suitable for use in coastal areas and even for store exhibition because of its rust-free features.

• Blade length: 240 mm
• Pitch: 1.0 mm
• Plate thickness: 0.3 mm
• Kerf: 0.46 mm
• Extra blade fits Razor saw Dozuki Wide 240.

User questions & answers

Question:	How are the teeth filed? Rip or Crosscut
Answer:	I can’t answer. It was bought for someone else.
Question:	I need a replacement blade, not sure what part of the blade I measure, the cutting part is 7 inches : razorsaw-japan 0.5-18 no.s
Answer:	The blade is not very stiff at all. what gives it its stiffness is the metal part of the handle that runs along the top edge of the blade. These Japanese pull saws are mostly used for fine cabinet and furniture making.
Question:	Does this blade fit the gyokucho razorsaw dozuki saw 240mm s
Answer:	I can’t answer this question.
Question:	how is the stiffness of the blade
Answer:	This saw works well with any wood type. Honestly it’s cut through everything Like butter. I’ve cut oak, maple, walnut etc. I love this little dovetail saw. It’s absolutely worth getting
Question:	i have a 9 1/4" mortice back gyokucho saw that needs a new blade, but the part no. is worn off. how do i know which replacement blade to order
Answer:	Yes, this price is only for one saw, but the saw is worth of every penny👍

Product description

This 0.3mm saw blade has the finest cut and is to be used whenever a precision, finely finished surface is required.  Bladeis easily replaceable.

• Replacement Blades available
• 0.3mm saw blade
• Offers precision, finely finished season
• Model # S-370

Product description

This saw is highly recommended for beginning users of Japanese Saws. This small Japanese hand saw is used for scoring and cutting panels or veneer. The "Woodpecker" hook tooth at the tip "V" end of the blade is used to scratch line to start the first cut. Metal backbone (Dozuki) helps keep the blade stiff. 7-1/2" Long cane Wrapped wood handle. Used for scoring and cutting panels or veneer.

• Value set with genuine replacement blade

Product description

Dozuki Saws with replaceable blades feature the precision and durability of tensioned high carbon steel blades which are easily removed from their bamboo-wrapped handles for replacement when worn. The Dozuki "Z" Saw is one of the smoothest cutting saws youll ever use, ideal for tight fitting, precision joinery. The 26 TPI x .012" thick blade of this saw (the best selling saw in Japan) can be quickly changed by a simple tap on the back. Rigid back insures accurate cuts with the 240mm (9-1/2") x 60mm (2-3/8") blade. Overall length is 535mm (21").

• Dozuki "Z" Saw
• Ideal for precision joinery
• Rigid back insures accurate cuts
• Easily removable blade
• The best selling saw in Japan

Product description

Gyokucho is the premier Japanese manufacturer of high quality saws with a reputation for reliability and good performance at a modest price. We use a method called impulse hardening to increase the durability of the tooth tips. The cutting edge is heated for 0.003 to 0.005 seconds by applying an electrical current at super high-frequency of 27.12Mhz, instantly hardening the surface of the steel while maintaining the flexibility inside. As a result, the wear resistance increases. The surface hardness of the blade is approximately from Hv 900 to 1200. All products have a name, blade thickness, the blade length, and even the extra blade part number marked on themselves. The marking is done by a laser irradiation method and won't wear off. So even when you lose the package, you can easily identify the products by checking its laser marking. Electroless nickel plating prevents the blade from rusting, and inhibits tree sap from sticking to the blade.

• Compact size makes this saw easy to fit in tool boxes or work in tight spaces. Blade length is 180mm, Thickness is 0.3mm, Teeth Pitch is 1.0mm, TPI is 25.4
• Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion resistance
• Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws
• Grip coated with EVA material for a durable no slip surface

Product description

A replacement blade for the Gyokucho 372 saw

• A replacement blade for the Gyokucho 372 saw
• 9 1/2" blade length
• Made in Japan