13 best electric staple guns

Product description

NEU MASTER Electric nailer/stapler is compatible with 3/8” crown staples (equivalent to Arrow T50 staples & Stanley TRA700) and 18 gauge brad nails (equivalent to Tacwise 18G, Arrow BN18, Bostitch 18G & Rapid no. 8 brad nails) of the following lengths: Staples – 8mm (5/16”), 10mm (3/8”), 12mm (1/2”), 14mm (9/16”) and 16mm (5/8”). Nails – 15mm (9/16”) and 16mm (5/8”) Voltage:110-120V/60Hz Rated Current:11A Rated Firing Speed: ≤20pcs/min Stapler/Nailer Type 50 8-16mm type F 15-16mm Wire Spec: 2M PVC cable UL plug

• FOR FREE: 336pcs staples and 200pcs nails
• ✨Friendly after-sale service--We provide replacement service instead of repairing.
• DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, wooden handiwork and home improving project.
• SAFETY -- Contact safety switch prevents unintentional firing.
• POWER ADJUSTABLE -- The electric staple gun has adjustable power knob for hard or soft material.
• 2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16" to 5/8" and 18 gauge brad nail from 1/2'' to 5/8''.
• EASY TO USE -- Easy magazine release for quick reloading.

User questions & answers

Question:	is it 220 v or 110 v
Answer:	110
Question:	Will this fit 1/2” staples
Answer:	Yes, it could fire 1/2” staples.
Question:	What length brad nails/staples does this take
Answer:	The tool works with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''. If my answer is not clear, please feel free to contact [email protected] for further assistance.
Question:	Does this multi tool work well for Upholstery
Answer:	I am a 76 year old woman and used it by myself to cover a tuffet.

Product features

Features

DIY -- The electric brad nail gun ideal for DIY projects, including upholstery, Wooden handiwork and home improving projects.

SAFETY -- Contact safety switch prevents unintentional firing.

POWER ADJUSTABLE -- The electric staple gun with adjustable power knob for hard or soft material.

2 in 1 STAPLE AND NAIL GUN -- Work with Staple T50 series or TRA700 series from 5/16” to 5/8" and 18 gauge brad nail from 1/2’’ to 5/8''.

EASY TO USE -- Easy magazine release for quick reloading.

ACCESSORY -- This tool including 18 gauge brad nail 5/8'' x 200pcs; T50 staple legs 3/8'' x 336pcs.

Step 1

• Squeeze the bracket of pusher assemble and pull out it

Step 2

• Put the staple strip in the magazine with points up

Step 3

• Or put the brad nail closely to the left side of magazine with points up

Step 4

• Push the pusher assemble until it locked

Step 1

• Confirm the adjustable power knob is in Max. position

Step 2

• Put the gun on work surface, Depress the contact safety pole with one hand firmly placing on the top of tool

Step 3

• Once the contact safety pole is depressed, push the trigger to fire. You must pick up the tool and reactivate the contact safety for each shot.

• 🎁Friendly after-sale service--We provide replacement service instead of repairing.
• For Free -- 200pcs nails and 336pcs staples included.
• ✅【The versatile 2 in1 brad nailer/stapler】- Due to staples and brads that the corded nail gun and a staple gun is compatible with, there are numerous applications for this tool such as general repairing, installing sheets of insulation and attaching lightweight trim, etc.
• ✅【Easy to use】- The upholstery brad gun/staple gun doesn't need a compressor and features a quick-release mechanism and an over-molded grip to combat grip fatigue during strenuous or time-consuming tasks.
• ✅【More efficiently】- The lightweight tacker can drive 30 shots per mins. It is more convenient/efficient to get the job done that the viewing window can show the quality of the nails and the time to refill the magazine.
• ✅【Selectable Power】- Comes with power adjusted knob, it’s easy to improve the work efficiency by adjusting the nailing strength according to the needs of the work.
• ✅【Quality Assurance】- WORRY-FREE-2-year-warranty. To help better use the nail/staple gun, please read the instructions carefully before use. If any questions or suggestions, please share with us and we will reply within 24 hours.

User questions & answers

Question:	Where does this ship from
Answer:	Our products are fulfilled by Amazon and the products will ship form the Amaozn Warehouse. Hope this can help you. If you have any other issues please feel free to contact us via with more details so that we can offer you more help. Spartatool Support Team
Question:	what is the difference between this model and NTC0040 model
Answer:	Thank you for your question. The sizes and specifications of the nails/staples used by the two nail guns are different. Therefore, the projects applicable to the two guns will also be different. This NTC0060 stapler works with Staple T50 series or TRA700 series from 5/16" to 5/8" and 18 gauge brad nail 9/16'',5/8''.But NTC0040 nail gun works with 1/4'' crown staple from 5/8'' to 1'', and 18 gauge brad nail from 5/8'' to 1-1/4''.
Question:	How long is the electrical cord. The listing said an extension lessons the impact power of the staple/brad
Answer:	Dear, thank you for your question. The cord is 6.5ft long and we do not recommend using extension cords. But if you need it, you can use a 12AWG cord to make sure that current losses can be minimized as much as possible. I hope my answer is helpful to you!
Question:	Can we use it for installing a stair carpet runner
Answer:	Hello Customer, Thank you for your question. Yes, this electric bard nail can be used for installing a stair carpet runner. Hope it can help you. If you still have any issue about this product, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team

Product features

Product Overview

NEU MASTER NTC0060 2-in-1 Electric Staple gun and Nail gun design for DIYers, ideal for many light-duty DIY projects. No compressor needed and the nail gun features a quick-release mechanism and an over-molded grip for convenient use. Kit includes a Brad Nailer Stapler, 200pcs 5/8'' brad nails and 336pcs 3/8" staples.The versatile machine can operate as a stapler to finish some projects such as thin ceiling tile and carpet padding installation and as a nailer to finish some projects such as shelving, trim molding installation,

• The high/low power feature helps you match the output force for the material.
• On/Off switch and contact safety prevents unintentional firing.
• The lightweight machine reduces worker fatigue.
• Soft- grip handle offers comfortable operation.
• Wide use to install insulation, ceiling tile, carpet padding trim molding, picture frame and other DIY hobby projects.

Warm Tips

NEU MASTER brings you professional tools for building & construction. This 2 IN 1 electric brad nailer is great for securing insulation plastic sheeting, carpets, and other fastening applications as well as devoted renovation, repair, DIY and hobby work at home. High-quality products you can rely on.

How to deal with these situations

Use the proper nails/staples for different projects

Product description

ELEC STAPLE/BRAD NAILGUN. Stanley Hand Tools is a brand of hand tools. It is a division of Stanley Black & Decker, following the 2010 merger of The Stanley Works with Black & Decker

The heavy-duty design of the Stanley TRE550 Electric Staple / Brad Nail Gun delivers outstanding driving power for a wide variety of jobs. The tool's dual power lever (Hi/Lo) is designed for use with hard or soft materials. A flush-nose design solves the problem of stapling in tight spots, while a contoured grip provides extra comfort on the job.

Versatile, durable, and designed to accomplish tasks efficiently.

The staple/gun also includes a anti-jam mechanism saves time on the job, a nose safety for safe operation of the tool, and an 8-foot power cord. This tools uses Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-inch, 9/16-inch and 5/8-inch brads.

From the Manufacturer

The heavy-duty design of the Stanley TRE550 Electric Staple / Brad Nail Gun delivers outstanding driving power for a wide variety of jobs. The tool's dual power lever (Hi/Lo) is designed for use with hard or soft materials. A flush-nose design solves the problem of stapling in tight spots, while a contoured grip provides extra comfort on the job.

Versatile, durable, and designed to accomplish tasks efficiently.

The staple/gun also includes a anti-jam mechanism saves time on the job, a nose safety for safe operation of the tool, and an 8-foot power cord. This tools uses Stanley SharpShooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-inch, 9/16-inch and 5/8-inch brads.

• Heavy-duty electric staple / brad nail gun with outstanding driving power
• Unique dual power lever (Hi/Lo) designed for use with hard or soft materials
• High Quality New!!!!!!!
• Includes 8-foot power cord
• Uses Stanley Sharpshooter TRA700 Series or Arrow T-50 heavy duty staples and 1/2-, 9/16- and 5/8-inch brads
• Heavy-duty electric staple / brad nailgun with outstanding driving power
• Unique dual power lever (Hi/Lo) designed for use with hard or soft materials

User questions & answers

Question:	UPHOLSTERy
Answer:	There seem to be reviews for multiple staplers. I purchased the TR250 and it does NOT come with staples. I do not know if the TR45K does or not.
Question:	what size staples did the gun come with? i read that it was 1000 of them, but what size? thanks everybody
Answer:	Yes - it is a (brad) nail gun as well. I use Arrow # BN1810 5/8" Brad Nails. This stapler takes 5 sizes of staples (1/4", 5/16", 3/8", 1/2" & 9/16") and 2 sizes of brad nails (1/2" & 5/8").
Question:	Does it come with staples or do I need to order that separately
Answer:	I wouldn’t. One slip and you’ll have a dent in your floor. I slipped with 1/4” plywood and it punched a hole through it.
Question:	is this a stapler and a nail gun? If a nail gun, what kind of nails do i use
Answer:	That is correct. The tolerance between the internal piston and the cylinder is so great that only large headed nails can be driven with it.

• Easy to Install and Use - Manual staple gun is made of thick carbon steel，adopting the principle of spring spring-back impact, long-lasting durability.
• Quick-Jam-Clear - When the nail of the staple gun is stuck, you can pull down the binding switch and remove the stuck nails to ensure the nail gun works properly.
• Power Adjustment - Use the knob of the power staple gun to adjust the pressure to fit the thickness of the material you are using, which will make your decoration work easier.
• 3-Way Staples - D-type, U-type, T-type 3-in-1 manual staples are ideal for repair, decoration and fastening to meet your different renovation needs.
• Premium Service - If you have any problems during using our product. Contact our Professional after-service team via email. Topec Direct after-sale Team will get in touch with you and timely solve your problems

User questions & answers

Question:	Will this gun also work with t-18, t-25, & t-50 staples
Answer:	Didn't work with anything
Question:	How do I replace the spring that goes under the tension screw at top of the stapler
Answer:	It is warranted send it back if you still have the papers
Question:	What is the depth of these staples or how deep do they go into the wood? Will it staple through a thin plywood to attach to wood surface
Answer:	The staple depth is about a half inch depending on the staples used and hardness of the surface. Pine boards - the staples sink right in. Oak boards - not so much. For the job you are describing - you might switch from staples to brads (like a finishing nail). Those should do the job you are looking for.
Question:	Will it staple into drywall
Answer:	Dear customer: I am sorry that I am afraid that this gun can't be used it. Because it is mainly used for wood and plastic-like materials. The strength of the stale gun is limited. We recommend that you buy a more powerful product. Thank you for your interest in our products.

Product features

Step1:

Remove the loading rod

Step2:

Hold the switch and pull down the metal drive channel

Step3:

Check the jammed staple in the drive channel and remove it

Step4:

After finishing and then restore the drive channel

Product description

The DEWALT Electric Multi-Tacker loads a variety of staples and brads from heavy duty, narrow, cable, 18-Gauge brads and 18-Gauge headless brads. Due to the variety of staples and brads that the Electric Multi-Tacker is compatible with, there are numerous applications for this tool such as installing carpet, installing sheets of insulation and attaching lightweight trim using the brads, to name a few. This tacker is bottom-loading and makes loading user-friendly

• Brand New in box. The product ships with all relevant accessories

User questions & answers

Question:	Does anyone have an operators/owners manual? can you share it
Answer:	Sam's Dad. You realize that 5/8" is equal to 10/16" which is 1/16" larger than 9/16"; I wonder how your 9/16 did not fit but 5/8 did?
Question:	can it use 1.5 inch braid nails
Answer:	what size brads does it take
Question:	Can this use 1 inch t-nails
Answer:	Yes, this would work for chairs, upholstery - the staple size would allow for that. Also, the tension pressure is string enough to get through the fabric.
Question:	What size nails will it take
Answer:	No longer includes ANY staples at all.

• Versatile 6-in-1Function - 6-in-1 function, which means It can be compatible with 6 kinds of staples/nails, including T50, JT21, T25, T20, Brad nail BN18, PIN with automatical power switching, by this feature, it can replace most of your previous staple guns, allowing you not have to change different staple guns frequently
• Continuous Hitting & 8Ft. Cord - The gun itself can fire at 60 staples per minute high speed, which helps you secure large surfaces quickly. No need recharging method makes it continuous hitting. 8-Ft. power cord offers an extended reach
• Corded for Multi-application - Our staple gun is used for various home improvement projects: upholstery, DIY artwork, carpeting, fastening fabric, weather stripping, foam and padding, cable and small fencing. Can also used for construction related jobs such as building a bird house or a dog house to projects of a larger scale
• Humanized Design - Made from lightweight materials, this stapler feels light and manageable, so you can work for long periods or maneuver it into tight spots comfortably. Quick-release loading magazine on the bottom for fast and easy staple/nail install. With the transparent window, it’s easy to monitor your staple levels
• Double Security Performance - The contact actuation mode and on/off switch allow you to fire long rows of staples without straining your hand or breaking your flow

User questions & answers

Question:	does it come with staples/nails
Answer:	The staple gun comes without staples. You can purchase the staples https://www.amazon.com/dp/B07VVN98ML/ref=emc_b_5_t via amazon
Question:	what size brad nails can it shoot
Answer:	BN18/Rapid No.8/ SWKBN625 Brad Nail; The foot length range of applicable nadils: ≤5/8”
Question:	will this work for a board and batten wall
Answer:	It depends on the hardness and depth of board and batten wall. When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16" When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"
Question:	How often does this jam? Do you need a certain brand of staples
Answer:	The correct method of use will not jam. It can be compatible with 6 kinds of staples/nails, including T50, JT21, T25, T20, Brad nail BN18, PIN with automatical power switching.

Product features

Indicator Status Description：

►►Notice When Using:

►To activate the staple gun after charging:

1st,Restart ON/OFF Swtich; 2nd, push the Trigger; 3rd, imitate the action of nailing; Then the indicator light will turn to green and ready for using.

►The Green light flash every 4 seconds (In standby mode ), to activate the staple gun:

1st,Restart ON/OFF Swtich; 2nd, push the Trigger; 3rd, imitate the action of nailing; Then the indicator light will turn to green and ready for using.

ATTATTION: To switch the staple gun ON by ressing the button "-" down, to switch the staple gun OFF by pressing the button "O" down.

The MAXIMUM wood density is 37.45 lb/ft3. It is recommended to cool the machine in a cooling state before storage.

T50

T50/Rapid N140/ TRA700 Staples;

The foot length range of applicable staples: 1/4”-9/16”;

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

JT21

JT21/Rapid N53/TRA200 Staples;

The foot length range of applicable staples: 1/4”-9/16”;

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

T20

T20/ CT300 Staples;

The foot length range of applicable staples: 1/4”-9/16”;

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

T25

T25/Rapid No.36/ CT100Cable Staples;

The foot length range of applicable staples: 1/4”-9/16”;

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

BN18

BN18/Rapid No.8/ SWKBN625 Brad Nail;

The foot length range of applicable nadils: ≤5/8”

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

PIN

PIN/Rapid No.9 Nail;

The foot length range of applicable nails: ≤5/8”

When you use wood density 28 lb/ft3, the MAXIMUM recommended nail lengths is 9/16"

When you use wood density 37.45 lb/ft3 the MAXIMUM recommended nail lengths is 3/8"

Product description

Unlike traditional Electric tools, arrow's breakthrough T50AC Electric stapler delivers consistent Pro grade performance regardless of jobsite voltage fluctuations - even on a 100 foot extension cord. A motor drive replaces the traditional Solenoid design and frees the tool from dependence on a narrow range of Specifications. The result is maximum Pro power with every shot. The T50AC also features a convenient bottom-load magazine with quick release feature, a soft overmolded grip, contact safety, and an oversized trigger. Additional features include an integrated LED work light, indicator light to show when staples are low, and storage case.

• Spiral-drive technology for consistent, driving power with every shot
• Works with all sizes of T50 staples from 1/4-inch up to 9/16-inch as well as 9/16-inch and 5/8-inch Brad nails
• Indicator light alerts when staples/nails are low
• Easy access magazine release for quick reloading
• Integrated LED work light provides focused illumination at the desired work area

User questions & answers

Question:	Will this work to staple cardboard to the bottom of a couch
Answer:	There are 9 A's per hundred; so 45 in this 500-tile set. There is one J, K, Q, X, and Z per hundred. There are two B's, C's, F's, H's, M's, P's, V's, W's, Y's, and blanks per hundred . There are three G's per hundred. There are four D's, L's, S's, and U's per hundred . There are six N's, R's, and T's per hundred . There are eight O's per hundred. There are nine A's and I's per hundred. There are 12 E's per hundred.
Question:	Will this work on shoe molding or quarter round
Answer:	Yes, there is a clear finish on these tiles.
Question:	Can i use anly brad nail
Answer:	United States
Question:	Does anyone know the max size brad nails this gun will take? Would it work for trim and base boards
Answer:	They are pretty thin and light so I’m not sure they would hold up.

• 📢Friendly customer service: we provide new replacement instead of repairing.
• FOR FREE---Tools includes 200 staples and 800 brad nails.
• 🔰CONVENIENCE --The wire 2-in-1 brad gun/staple gun doesn't need compressors, hoses for convenience use.
• 🔰WIDE APPLICATION -- The upholstery nail gun ideal for softwood DIY projects such as Carpentry DIY, picture framing, door or window molding installation, pet house DIY while not recommended for quarter round, baseboard, drywall installation, roofing and flooring.
• 🔰FLAWLESS FINISH -- Non-Marring rubber nose provides a complete finish.
• 🔰FRIENDLY USE -- The wire 2-in-1 brad gun/staple gun equipped with ergonomic soft-grip handle for reducing worker fatigue.
• 🔰ADJUSTABLE POWER -- This electric brad nailer designed with adjustable power function for light-duty project.

User questions & answers

Question:	Mine will fire but it wont shoot any nails and i have not even used it for a day
Answer:	I could get mine to shoot, but it wouldn't go into soft trim more than 1/8 inch. That was maximum depth... Most were less than half that. I sent it back.
Question:	Repairing rattan rawhide bindings. Will this shoot 23 GA, 3/16" crown, 3/8" leg
Answer:	Hello Customer, No, this electric Brad Nailer/Stapler drives 18 GA brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1". Using improper nails/staples may cause operational problems. Hope this can help you. If there is anything issue we can help you, please do not hesitate to contact us via [[email protected]] and we will reply to you ASAP. Spartatool Support Team
Question:	podrias especificar con que grapas es compatible y donde se puede adquirir las grapas
Answer:	Puedes conseguir las en Walmart o cualquier ferretería. A mi me a sido muy útil.
Question:	Electric brad nailer, neu master ntc0040 electric - does this model drive 1”, 1 1/2” and 2” brads
Answer:	Hello Customer, The longest brad nails can be used for this electric brad nailer/stapler is 1-1/4''. And this length is recommend for soft wood. Hope it can help you. If you have any issue or need help during use, please do not hesitate to contact us via [[email protected]] and we will do our best to serve you. Spartatool Support Team

Product features

Product Overview

The NEU MASTER NTC0040 Electric Brad Nailer/Stapler drives 18 gauge brad nails up to 1-1/4'' inch and 1/4'' crown staples up to 1" which makes it ideal for general repairs, craftwork, interior or exterior decorative lightweight trim, upholstery, and more. No compressor needed and the nail gun features a quick-release mechanism and an overmolded grip for convenient use. Kit includes a Brad Nailer Stapler, 400pcs 5/8'' brad nails, 400pcs 3/4'' brad nails and 200pcs 3/4'' staples.

• Drives nails and staples
• Ergonomic grip for comfort and control
• Power adjustment dial and oversize trigger
• Quick-release mechanism
• Contact safety with non-marring nose provides a flawless finish

Product description

This amazing home work creature , good quality , can be very easy operation , help you do great jobs and enjoy working fun . You can also buy very easily our nice staples at fair price.Sure you will not care if the staples made from where as far as it is good for both quality and price. Tips make US society smooth and harmony , so do the good and fair comments .



Operation Tips :

For safety reason , this machine is designed with 3 lock switches . Only open on/off bottom red switch , press trigger and push tacker front part can start working .When use , be sure to open bottom red switch , otherwise the machine will not work .



Staples type : 8mm，1000pcs. type 530#



Buy our staples : https://www.amazon.com/dp/B07BKSVZ1H?ref=myi_title_dp

• This amazing home work creature , good quality , can be very easy operation , help you do great jobs and enjoy working fun . You can also buy very easily our nice staples at fair price.Sure you will not care if the staples made from where as far as it is good for both quality and price.
• 3.6/4V cordless staple gun , USB plug with charger；Staple type : 53 / JT21 ; One time loading : 100 staples
• Proposed staple depth : 10mm ; Max staple depth :12mm ; 1000 staples included
• Fully charger working number : 1000 staples ; Number of staples per minute : 40 staples
• Triple safety switch :1. red on/off switch ; 2. trigger ; 3.push front then shooting staples .

User questions & answers

Question:	Can I use this to staple insulation in my attic
Answer:	Yes, it does. the usb c hub is compatible with usb c devices as long as the phone supports video output.
Question:	Can i staple chicken wire to a 2by
Answer:	The globe is not made of glass. It is two pieces of an acrylic type material that encases an invisible liquid allowing the globe to flow seamlessly and effortlessly.
Question:	Will this shoot brad nails? If so what kind
Answer:	Our globes would come with a one year warranty, which would cover any unforeseen manufacturing issues. The warranty would not cover damage due to mishandling, such as the globe being dropped or any damage due to personal negligence.
Question:	does it use standard (easily found) staples? And, what sizes
Answer:	Yes! This globe would come with our standard 3-pronged acrylic base that you see pictured.

Product description

The T50ACD Compact Electric Staple Gun is the product of innovation and Arrow’s commitment to providing the best possible tool for a wide variety of needs. Like other Arrow products, the T50ACD Compact Electric Staple Gun utilizes a unique, patent-pending motor and a bottom-loading magazine to enable users to tackle their project head-on. Plus, the staple gun features a quick-release mechanism and an over-molded grip to combat grip fatigue during strenuous or time-consuming tasks. This staple gun is best used for general repairs, craftwork, interior or exterior decorating, upholstery, and more.

• 100% wool
• Made in the USA
• Quick-release mechanism
• Bottom-loading staple magazine
• Comfortable, over-molded grip
• Patent-pending motor
• Contact safety

User questions & answers

Question:	Would this staple luann to an existing floor
Answer:	I think pine. That look. Light. Nice , smooth surface.
Question:	How is it (easy?) to reattach screens pushed out by my cat and / or to install new screens on my screen porch
Answer:	No. I painted them with one coat of white paint, and it worked well. Want a pic?
Question:	We want to use this to staple replacement vinyl on a jet ski seat. Powerful enough
Answer:	It depends on the project. They are light weight so a small amount of white glue will hold for a child's art project or temporary border in a nursery or child's room so as they get older they're easily removed. You can use the thin type of velcro or two sided tape. You can use a tiny piece of gorilla tape and tape a wire or cord at both ends in a taut line and hang them. You can drill teeny holes in top 2 corners and run a pretty ribbon through as a visible and charming hanger. Or use sports motif shoelaces instead of ribbon for a boy...so many things! I have great things I do with them for table placards to mark seats or Christmas ornament and wreaths and awards to hang around older children's neck like and Olympic Medal... If been known to repair little holes by gluing one of these over the hole!
Question:	Will it go over chicken wire into hardwood
Answer:	Yes they are packaged in sets of 100

Product features

Heavy Duty but Yet Lightweight and Utilitarian

The Arrow Fastener T50ACD Corded Electric Staple Gun is ideal for upholstery and general home repair, it is simple and easy to install and use due to its compact design, making it easy to store as well. The spiral-drive technology comes in use to give you a consistent driving power.

Easy to Use

This tool can be used in various applications around home such as upholstery, insulation, screen repair, woodworking projects, fencing and repairs. The Arrow Fastener T50ACD Corded Electric Staple Gun is also extremely safe to be used as it comes with a few safety mechanisms that prevent accidental firing. Ergonomic and lightweight, a rubber cushioned handle for comfort is an added benefit.

• 【Selectable Drive】- Comes with sequential- or single-fire mode switch, it’s easy to improve the work efficiency by adjusting the nailing mode according to the needs of the work. Switch to“TTT”, keep pressing the trigger and then push the safety striker pin and nosepiece in sequence down onto the surface to be fastened(The trigger cannot be released halfway).
• 【Never Too Hot】- This electric tacker is designed with built-in motor, that will NOT cause the machine to be too hot and stop working, instead of the coil structure, which is commonly used in the electric stapler of major else brands
• 【Widely Use】- With 1500 pieces T50 staples (8mm, 10mm, 12mm), 500pcs Brad Nails (14mm length), and 60pcs/min rated firing speed, this power tool is perfect for stapling and nailing of cardboard, insulating material, fabrics, foils, leather, corkwood, etc
• 【Safety and Comfort】- Designed with triple lock mechanism for extra security and safety: on/off switch, striker pin and power trigger, this electric hand tool could be stored at home safely even if there’re curious kids, and the ergonomic handle provides a comfortable grip
• 【Quality Assurance】- WORRY-FREE-12-month-warranty. UL-certified for North American use. To avoid accidents, please read the instructions carefully before use. If any questions or suggestions, please contact us, we will reply within 24 hours.

User questions & answers

Question:	Does this come with a case
Answer:	No, it doesn’t. It would be nice as it is kind of awkward to store. However, the staple gun is great! I’ve used it on upholstery.
Question:	does this have a power adjustment for staple depth
Answer:	No, there's no power adjustment.
Question:	Does this in a battery operated version
Answer:	No, this is a corded electric staple gun.
Question:	I cannot get the staples to come out. confusing on loading staples. help! staples legs up? terrible instructions
Answer:	Make sure you are using correct staples and yes the staples go in with staple points directed towards you. I use arrow staples and you would have to read manual to determine what sizes it will allow.

Product features

CONTENTS IN THE SET

1* Electric Staple Nail Gun

1* Instruction manual

500* 8mm T50 Staples (5/16″)

500* 10mm T50 Staples (3/8″)

500* 12mm T50 Staples (1/2″)

500* 14mm Brad Nails (9/16″)

Product description

Description:

This brad nailer is compatible with both 5/16’’- 5/8" T50 staples and 5/8’’ TF brad nails. With a rated firing speed of 20pcs/min, it is perfect for stapling leather, cardboard, foils, etc. Dual purpose design makes it easy for you to use without changing electric staple gun. Besides, the adjustable power knob enables you to easily adjust the impact level according to different materials. Designed with triple safety mechanism, this electric staple gun is reliable and safe to use. Ergonomic grip and lightweight design also make it comfortable to use. Characterized by its outstanding driving power, this nail gun is perfect for stapling and nailing of cardboard, fabrics, foils, leather, etc. It will be a great life helper!

Features:

Rated firing speed of 20pcs/min and outstanding driving power

Adjustable power knob makes it easy to nail different materials

Dual purpose design is easy to use and saves you a lot of trouble

Triple safety mechanism ensures its safety and reliability

Ergonomic grip is comfortable to use when working

Perfect for upholstery, carpentry, furniture DIY, etc

800pcs T50 staples (9/16’’) and 200pcs TF brad nails (5/8’’) are included for your convenience

Specifications:

Color: Red

Net Weight: 3 lbs

Overall Dimension: 7.5’’ (L) x 9’’ (W) x 2.5" (H)

Voltage: 110V/60Hz

Rated Firing Speed: 20pcs/Min

Staple Size: 9/16’’

Brad Nail Size: 5/8’’

Power Cord Length: 6.6 FT

Package includes：

1 X Brad Nailer

1 X Instruction Manual

800 X 9/16’’(14mm) Staples

200 X 5/8’’(15mm) Nails

• 【Impressive Performance & Selectable Power】 With a rated firing speed of 20 pieces/min, this power stapler is perfect for stapling leather, cardboard, foils, etc. It helps you nail almost everything quickly and securely. Additionally, coming with an adjustable power knob, this power nail gun enables you to easily adjust the impact level according to different materials.
• 【2 in 1 Staple and Nail Gun】 This power stapler/nailer is compatible with 5/16’’- 5/8" T-50 staples and 5/8’’ T-F nails. Dual purpose design makes it easier for you to use without changing electric staple gun. Besides, we've also provided 800pcs T50 staples and 200pcs TF nails for your convenience.
• 【Triple Safety Mechanism】 Designed with triple safety mechanism: on/off switch, trigger and contact actuation system, this electric staple gun is absolutely safe and reliable. As long as you don't press the tacker head on the workpiece, the contact drive system locks the trigger to prevent accidental operation.
• 【Humanized Design for Convenience Use】 This power staple gun features a magazine, which makes it convenient to store the staples. Meanwhile, the ergonomic grip will increase friction and its light weight of 3 lbs enables you to accomplish time-consuming jobs without feeling fatigue.
• 【Wide Application】 Characterized by its outstanding driving power, this brad nailer is strong enough to penetrate the hardwood. It can be used for stapling and nailing of cardboard, plasterboard, fabrics, foils, leather, etc. Besides, easy-to-operate design also makes it a perfect choice for DIY users to build a pet house or projects of a larger scale.

User questions & answers

Question:	can this nail gun take nails longer than 1 inch, 2 inches for example
Answer:	Check if your laptop supports USB C visual output if your laptop does not support you won’t be able to use HDMI or any visual source this has (i have HP laptop, too and mine does not support it)
Question:	can you this for soft wood like pine, plywood, mdf
Answer:	Yes, it does!

Product description

The Milwaukee M12 3/8” Crown Stapler delivers a true hand tool replacement. It is designed to drive a range of 3/8” flat crown staples (1/4”-9/16”) through an array of materials and substrates. This unit is compatible with all Milwaukee M12 batteries, and carries Milwaukee’s 5-year limited power tool warranty.Compact DesignThe crown stapler features 7.25” long and 3-pound weighted design that allows for great access into tight spaces. With an adjustable belt hook, it gives you convenient tool belt portability. The compact and ergonomic design with an easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers. Easy-to-Use DesignFeaturing a slotted magazine design for easy staple viewing, this stapler allows up to 1500 staples per charge on a M12 REDLITHIUM 1.5ah battery. The integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes. The dry fire lockout prevents unintended damage to the work surface. The stapler includes a staple leg locating arrow allows for accurate staple placement. The crown stapler features a power adjustment dial for consistent flush stapling through various materials.

• COMPATIBILITY: It is designed to drive a range of 3/8” flat crown staples (1/4”-9/16”) through an array of materials and substrates
• COMPACT DESIGN: The crown stapler features 7.25” long and 3-pound weighted design that allows for great access into tight spaces. The compact and ergonomic design with an easy to squeeze trigger design significantly reduces fatigue associated with traditional hand staplers
• CAPACITY: Featuring a slotted magazine design for easy staple viewing, this stapler allows up to 1500 staples per charge on a M12 REDLITHIUM 1.5ah battery
• INCREASED PRODUCTIVITY: The integrated sequential and contact actuation trigger design provides increased productivity and seamless changing between firing modes
• STAPLE LEG LOCATING ARROW: The stapler includes a staple leg locating arrow allows for accurate staple placement

User questions & answers

Question:	How well does it work with fiberglass insulation installation
Answer:	Don't worry at all, the surface of this product is made of stainless steel, so it is not easy to rust!
Question:	Will this work on staples 9/16" on doing garage opener wire
Answer:	-the staple remover is not the problem, no it doesnt. But the gun keeps jamming up on me. wouldnt reccomend it.
Question:	Will the milwaukee 2447-20 m12 3/8” crown stapler work effectively in stapling a 16 gauge black vinyl coated welded wire to our1x6 pine boards
Answer:	For our staplers, the available lengths of doors and straight staples are 4-14 mm and 10-14 mm respectively, and the U-shaped range is 10-12 mm
Question:	Can this be used on ductboard construction
Answer:	depending on the hardness of the surface. Pine boards - the staples sink right in. Oak boards - then not so much; Hope my suggestions are useful to you.