14 best pipe cutters

Product description

Product characteristics: cutes PVC, aluminum or plastic pipes. When cutting the PVC flexible pipe you should revolve the pipe whilst compressing.

Scope of cut: rigid plastic pipes to a maximum diameter of 42mm.

INSTRUCTIONS OF USE:

1: Part the handles to suit fir cut angle.

2: Compress handles tightly until the pipe is cut.

3: After cutting close the handles.

ATTENTION

When using this product in the winter it is advisable to put the pipe in lukewarm water to heat, this will avoid burst pipes due to cold making pipes fragile for cutting.

If the edge of the cutters are showing signs of wear and tear, loosen the fixing screw, remove the blade and replace it with the same type of pipe cutting blade.

After use, we recommend rustproof oil is applied to the cutter.

• Use Area: Durable pipe cutter for cutting PVC, plastic & rubber tubing.Great helper for home handy man, plumbers, electricians, and vehicle mechanics.
• Easy Operation:One-hand Fast Poly pipe cutter tool with ratchet drive for cutting less than 1-5/8in (38mm).
• Durability: professional pipe cutter adopts ratchet drive technology to greatly save your strength.
• Safe for You:In the bottom of pipe cutter, there have a stainless buckle. When you don't use it, you can buckle the safe lock.
• Service:Our product comes with a 1-year warranty against material defects and workmanship. We promise full refund if you are not satisfied with our products. No questions asked!

User questions & answers

Question:	Would these cut through a sturdy storage box? I need to get rid of one and would like to cut it into pieces
Answer:	Y
Question:	Would this work on copper pipe
Answer:	This machine does not offer a spot weld timer.
Question:	Where can I purchase a replacement blade
Answer:	https://www.eastwood.com/mig-spool-gun-metal-connector.html works with this machine
Question:	I bought these for 1-1/2" pvc, but it doesn't fit. says it goes up to 1-5/8". am i missing something
Answer:	4" or 8" spools

Product description

A handy tool for working in tight and cramped spaces, the RIDGID 40617 Close Quarters Tubing Cutter is a must have for any plumber's toolbox. This tube cutter is specially designed for use in restricted spaces on small diameter tubing. Rollers feature grooves for close-to-flare cuts. Constructed for durability and ease of use, it has strong yet lightweight slide and wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

The metal tube cutter includes a spare cutter wheel in the knob for maximum uptime.

This RIDGID tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 40617 is a tubing cutting with a capacity of 1/2-Inch to 2-Inch and is specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts. It has a strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting pressure for clean cuts. This cutter includes a spare cutter wheel in the knob

• Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
• Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
• Rollers include grooves for close-to-flare cuts
• Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
• Includes spare cutter wheel in knob

User questions & answers

Question:	Will this work on fiber glass arrows
Answer:	The tig torch will have a separate outside gas hose to use while the MIG is all internal
Question:	Can this cut most pipes
Answer:	3-year warranty
Question:	I'm digging up a water main that's copper and is thicker than hvac copper. Will this cut it nice and clean? It's
Answer:	Yes this machine can run with 7018 electrodes.
Question:	Can this cut 1" brass pipe? The Outside diameter of 1" brass pipe is 1.32". Thanks
Answer:	Hello, Thank you for your message. The welder that you are referring to can weld up to 3/8” thick steel. Regards,

Product features

Achieve Clean Cuts in Tight and Cramped Spaces

An essential tool for working in tight and cramped spaces, the RIDGID 101 Close Quarters Tubing Cutter is a handy tool for any plumber's toolbox. With tough cutting jobs in mind, this metal tube cutter is specially designed for use in restricted spaces on small diameter tubing. Constructed for durability and ease of use, the tube cutter has strong yet lightweight slide-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Ideal for Restricted Spaces

RIDGID Close Quarter Tubing Cutters are specifically designed for use in tight and cramped spaces on small diameter tubing.

Durable and Easy-Use Design

Tube cutter features a strong yet lightweight slide­-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Grooved Rollers

For added versatility, the rollers on this tubing cutter feature grooves that allow for close-to-flare cuts.

Works with a Variety of Materials

The RIDGID 101 tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and is suitable for use with hard and soft copper, aluminum, brass and plastic.

Handy Spare Wheel

The 101 metal tube cutter works with the RIDGID E3469 Cutter Wheel; tube cutter includes a convenient spare cutter wheel in the knob for maximum uptime.

Full Lifetime Warranty

RIDGID tools are built to last and come standard with the best warranty in the industry. Our reputation for superior quality and durability allows us to stand behind our tools with the RIDGID Full Lifetime Warranty against defects in workmanship and material. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge.

Product description

Specifically designed for use in restricted spaces on small diameter tubing, the RIDGID Close Quarters Tubing Cutter makes tight cutting jobs easier. Built for durability and ease of use, the metal tube cutter features a strong, lightweight slide and wheel housing and large knurled feed screw knob that produce clean cuts by providing easy control of cutting pressure.

This copper tubing cutter has an 1/8-inch to 5/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The ridgid 32975 is a close quarters tubing cutter with a capacity of 1/8-Inch to 5/8-Inch. This cutter is specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing. The rollers include grooves for close-to-flare cuts. This cutter features a strong, lightweight slide and wheel housing and has a large knurled feed screw knob that gives easy control of cutting pressure for clean cuts

• Cuts hard and soft copper, aluminum, brass and plastic tubing
• Specifically designed for use in restricted spaces on small diameter tubing
• Strong, lightweight slide and wheel housing and large knurled feed screw knob provide easy control of cutting pressure for clean cuts
• Tubing cutter has a 1/8-inch to 5/8-inch (3 mm to 16 mm) cutting capacity
• RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

User questions & answers

Question:	Will this score glass tubing
Answer:	It didn’t fit my Lincoln pro mig 180 .
Question:	Canyou cut rigid acrlic tubing with this
Answer:	Yes
Question:	how do you turn the cutter wheel
Answer:	Overall Dimensions: 10.75” wide X 17” long X 15.75” tall. The outside diameter is 30mm, inside diameter is 10mm and the thickness is 11.85mm. Weight: 62.0Lbs (24.5kg)
Question:	Will this work for metric pipe as well
Answer:	Overall Dimensions: 10.75” wide X 17” long X 15.75” tall. Weight: 62.0Lbs (24.5kg)

Product features

RIDGID Model 103 Close Quarters Tubing Cutter

Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.

• Rollers include grooves for close-to-flare cuts on models 101, 101J and 118.
• Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
• Models 117 and 118 include a self-feeding AUTOFEED cutter wheel that automatically cuts after tightening the knob only once.
• The Model 118 features a special knob for easier tightening of the feedscrew.
• Model 101-ML is for multilayer tubing only.

Product description

The RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle is designed for easier cutting of hard and soft copper, aluminum and brass in tight, restricted spaces where the cutter cannot be rotated by hand. With its 2-in-1 design, the tubing cutter can be used alone or with the ratchet handle, a light and ergonomic accessory that offers greater flexibility and mobility when cutting. The rugged, compact handle attaches to the cutter and operates in ratchet steps as small as 10 degrees, allowing for fine indexing in tight spaces. The easy-to-turn football-shaped knob only needs tightening once and the spring-loaded cutter wheel automatically cuts, for ease of use in hard-to-reach areas. Close quarters tubing cutter has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity. This tubing cutter includes a spare E-3469 Cutter Wheel in the knob. Ratchet handle is also compatible with the model 101 tubing cutter and E-1740 soft flexible plastic cutter wheel. RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength, and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

The Ridgid 32573 118 Close Quarters Quick-Feed Cutter can now be enhanced with a ratchet handle that allows for easier cutting in tight, restricted spaces. Of rugged and compact design, the handle can be attached to the cutter and operated in ratchet steps as small as 10 degrees. This allows for fine indexing of the cutter to operate in tight spaces. The new ratchet handle allows more flexibility and mobility while keeping the AUTOFEED features of the model 118 Cutter, which is designed to cut hard and soft copper, aluminum and brass. The 2-in-1 close quarters cutter can be used alone or with the ratchet handle, a light and ergonomic accessory to help use the cutter in tight and restricted spaces. This cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once. The handle works in tight spaces that are too small to rotate the cutter by hand. The 32573 is adjustable to any size from 1/4-Inch to 11/8-Inch OD. This tubing cutter comes with a spare E-3469 cutter wheel in the knob. Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

• Featuring a 2-in-1 design, the tube cutter can be used alone or with the attachable, light and ergonomic ratchet handle
• Designed to cut hard and soft copper, aluminum and brass
• Rugged and compact ratchet handle attaches to cutter for easier cutting in tight, restricted spaces; handle can be operated in ratchet steps as small as 10 degrees
• Cutter is easy to use in hard-to-reach areas because the knob only needs to be tightened once
• Tubing bender has an adjustable 1/4-inch to 1-1/8-inch (6 mm to 28 mm) outside diameter capacity

User questions & answers

Question:	Will it cut 1" copper tubing thats actually 1 -1/8 od
Answer:	yes . Very sturdy pipe cutters. Handles are comfortable and product is song and durable. Cut on pipe is very clean. Great cutters!
Question:	It uses the same blade as rigid 101 and 104 that claim they cut pvc. why won't this model do the same
Answer:	I would not use this type of cutter for copper pipe, as it would try to smash the pipe some. Use your normal wheel cutter.
Question:	Will this cut 1/2” electric conduit in close courters
Answer:	for $14 just buy a new tool.. I use mine for home use and I cant for see me wearing it out if properly used on materials it is designed for. For the price it works well.
Question:	can the handle be purchased separately? Already got the cutter
Answer:	1 1/2 in. pvc is 1.9 outside dia. that is more than 1 5/8

Product features

Designed to Cut Various Materials

The RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle is engineered to easily cut hard and soft copper, aluminum and brass. Sleek and lightweight, this tool can reach tight and restricted spaces where the cutter cannot be rotated by hand.

Versatile and Multipurpose

With its 2-in-1 design, the RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle also functions as a tubing cutter that can be used alone or with the ratchet handle. A super lightweight and ergonomic accessory to use, the RIDGID 32573 2-in-1 Close Quarters AUTOFEED Cutter with Ratchet Handle offers greater flexibility and mobility when cutting.

Rugged and Compact

The handle of this tool attaches to the cutter and operates in ratchet steps as small as 10 degrees, allowing for fine indexing in tight spaces. It also features an easy-to-turn football-shaped knob that only requires to be tightened once and has a wide outside diameter capacity.

• HANDYMAN’S BEST FRIEND – Our tubing cutter is especially designed to assist plumbers, electricians & mechanics – whether it’s used as a screw cutter, copper cutter, steel cutter, brake line cutter or an exhaust cutter.
• PLACE, ADJUST AND ROTATE – Cutting copper tubing has never been easier. Simply, put the tube in the slot where the blade is, adjust to the appropriate setting and rotate your tube. It’s never been this effortless to cut copper tube.
• NOT JUST FOR COPPER – Our pipe cutting tool isn’t just a great copper tube cutter but also can also cut steel pipe, stainless steel tubing, aluminium piping, PVC and iron. However, we do not recommend cutting PVC pipe as it’s a lot more difficult to cut.
• GREAT FOR SMALL SPACES – Looking for a fantastic copper pipe cutter for tight spaces? Look no further! Our small pipe cutter fits perfectly in restricted spaces. Our metal tube cutter is also great as an accurate arrow cutter.
• EXTRA BLADE – Our mini pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence.

Product features

Kraftex Tube Cutter 1/8inch to 1-1/8inch

Kraftex Tube Cutter is great at cutting multiple materials and working in restricted spaces. The strong rollers and strong, lightweight sliding mechanism make it the easiest tool to help cut pipes.

Step by Step on How to Cut Pipe!

Place your pipe in the mouth (the round slot) of the cutter.

Step by Step on How to Cut Pipe!

Turn the knob to tighten its grip on the tube.

Step by Step on How to Cut Pipe!

Depending on your workspace, turn either the pipe or the cutters slowly in circles. Our recommendation would be to score once on the pipe and then tighten the grip on the pipe using the knob and carefully circle, using your scored line as a guide.

Step by Step on How to Cut Pipe!

Take your time to ensure it's an even cut until to the pipe breaks.

Extra Sharp Blade

Not only is our blade extra sharp to make sure you accurately cut your pipes - we also provide an extra blade for when yours loses it's sharpness.

Strong, Lightweight Sliding Mechanism

Effortless gliding for quick and easy adjustment when cutting your pipes.

Robust Rollers

Our rollers are robust enough to hold your pipe tightly to avoid multiple incisions.

Large Knurled Feed Screw Knob

The screw knob is ergonomically designed to create the maximum grip for a smooth, straightforward cut.

Product description

This LENOX TIGHT SPACES tubing Cutter Kit includes tube cutters that have shock-resistant steel with optimized blade geometry to provide less burr and more cuts. Each tube cutter features a non-slip grooved cast body that only needs 1/2-inch clearance to cut. Their stainless-steel rollers protect them from rust and corrosion.

• Less Burr. More Cuts - Optimized blade geometry of shock-resistant steel
• Compact Design for Tight Spots - Non-slip grooved cast aluminum body only needs 1/2" clearance to cut
• No Rusting - Stainless steel rollers protect the cutter from corrosion
• Quick Identification - Color coding for easy tool recognition and cutting direction
• Kit Includes 1/2", 3/4" and 1" Tight Space Tubing Cutters

User questions & answers

Question:	Country of Origin
Answer:	It cut plastic tube ... I couldn't said that works well on fiber glass... I don't know how the finish will look because of the fiber...
Question:	Is this.like.the general auto cutter
Answer:	Yes, it can cut most pipes. BW2
Question:	Which replacement Cutting wheel are for this unit
Answer:	Yes, it will cut up to 1-1/8"
Question:	Does this come in 7/8 and 3/8 sizes
Answer:	Its maximum opening ability is 1 and 1/8 inch so although it will cut copper it does not sound like it will open wide enough.

Product description

HIGH QUALITY BLADE

The durable pipe cutter is made of manganese steel that is high hardness, good toughness, strength and durable. 

One-hand Fast Pipe Cutting Tool with Ratchet Drive for Cutting Less Than 1-1/4" O.D. PEX, PVC, and PPR Pipe.

Do not use to cut metallic pipes or cable wire, which will damage your blade. 

Pipe Cutter adopts ratchet drive technology to greatly save your strength.

Original double spring design, extremely flexible.

Stainless buckle can save your space. And it will also become portable, which is convenient for your work and life.

• 【High Quality and Safety】The durable tube cutter are made of manganese steel that is high hardness, good toughness, strength and durable. Our blade SK5-42mm is imported from Japan. PVC Pipe Cutters is ideal for use on a variety of plastic pipe and tube. The Pipe Cutter handle design Lightweight, and the blade is thick and sharp. Make work easier. And It process heat-treated to make the blade more sharp, durable and not easy to break. At the same, it is not easy rusting.
• 【Ergonomics Design】 The professional tube cutter adopts ratchet drive technology to greatly save your strength. Powerful and do not require much strength to cut pipe. The powerful bite force makes the work easier. The fish handle is for added comfort, which guarantees long-lasting working. The tube cutter can improve work efficiency by fast cutting. User can cut pipe within 5 to 20 seconds, comfortable design for easy cutting and less hand fatigue.
• 【EASY TO OPERATE】Tubing cutter built with comfortable, ergonomic, textured handles that provide a reliable grip. Spring-loaded handles allow for faster positioning of easy, single stroke cuts. In the bottom of the tube cutter, there has a stainless buckle. When you don’t use it, you can buckle the safe lock. The tube cutter will become small to save space. And it will also become portable, which is convenient for your work and life.
• 【Wide Application】 Zantle Tube Cutter is ideal for use on a variety of plastic pipe and tube. It is an awesome tool. It is an essential cutting tool for your home handyman, plumbers, electricians, and vehicle mechanics. The blade is as thick as 2.5mm. The cutter is commonly used for cutting most kinds of plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing. Cutting capacity is less than 1-5/8in (38mm) outer diameter.
• 【SERVICE & SUPPORT】 Zantle based service team makes you worry free after purchasing. Our product comes with a 1-year warranty against material defects and workmanship. We promise a full refund if you are not satisfied with our products. No questions asked!

User questions & answers

Question:	It is easy to cutter
Answer:	No, it's not designed for cutting glass
Question:	Where can i buy Blades for this
Answer:	Yes, I bought it for that, however, it will crack the tubing very easily if you're not careful. It was too difficult for me to get it right, so I ended up just buying a small chop saw which cuts acrylic tubing much faster and without any cracking.
Question:	Can these cut pvc tees for one inch PVC pipes
Answer:	Hello when cutting copper you always pull the cutter towards you so that the cutting wheel rides on the material last not the roller wheel. Also remember to make 1 revolution then 1/4 turn or less on each pass to avoid egging the copper end which will mess up your joint later when you solder.
Question:	Can this cutter handle pex-al-pex tubing
Answer:	You need a metric pipe cutter. I keep mine by my metric crescent wrench.

Product description

Package Content: 1 x Pipe Cutter

Our PVC Pipe Cutter:The maximum opening is 42mm. After many tests,the cutting capacity up to 1-5 / 8 inches (42mm) outside diameter.

Why do customers choose to buy our Pipe Cutters?

1:Unique sharp blade Our pipe cutter blades are made of Japanese Teflon SK5-42mm material, which are extremely sharp, ensuring easy and fast direct and precise cutting, making your craft more delicate.

2:Ergonomic design Powerful ratchet drive technology, the original dual spring design allows you to cut with one hand.

The rubber handles fits perfectly into your hand, providing comfortable balance and control, helping to reduce fatigue in one-handed operation and making it easier to operate.

3:Do all sorts of cuts With incredible versatility, they design for pipe applications.

Commonly used for cutting most plastics (PVC, CPVC, PP, PEX, PE, rubber hoses) and multi-layer pipes, used in a variety of applications to complete the project you need.

4:Safety concept There is a stainless steel safety buckle at the bottom of the pipe cutting machine, which is firm and thick. When you are finished using it, you can buckle the safety buckle to avoid the danger of children touching.

Warm Tips:

1.Do not use to cut metallic pipes or cable wire, which will damage your blade.

2.When using this Product in Winter it is Advisable to Put the Pipe in Lukewarm Water to Heat,this will Avoid Burst Pipes due to Cold Making Pipes Fragile for Cutting.

3.After use We Recommend Rustproof Oil is Applied to the Cutter.

4.In order to cut a perfect kerf, please keep kerf distance pipe mouth at least 1.5inch.

• 【Ergonomic design】The pipe cutting machine adopts the ratchet drive technology to smoothly complete the cutting operation with one hand, which makes cutting more labor-saving and improves work efficiency. It also ensures automatic locking during the cutting process to protect the user from the rebound of the blade. The handle adopts the principle of leverage, design lightweight.
• 【Wide range of applications】The Pipe Cutter blade has a thickness of 2.5mm and is usually used for cutting most plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer pipes. The maximum opening is 42mm. After many tests,the cutting capacity up to 1-5 / 8 inches (42mm) outside diameter. This is quite convenient for your work and life. I think it is an essential cutting tool for home spare parts, plumbers, electricians and vehicle mechanics.
• 【High quality, exquisite craftsmanship】 Durable pipe cutters are made of high-quality manganese steel with high hardness up to HRC52, good toughness and durability. Our blades are made of Japanese Teflon SK5-42mm material and are not easily broken. After heat treatment, the blades are not easy to rust.
• 【EASY TO USE】The pipe cutter is made of rubber-textured handle, which is more comfortable to use, reliable to hold, and not easy to hurt. At the bottom of the tube cutter, there is a stainless steel buckle for easy storage. When you don't use it, you can shrink the handles on both sides and lock the security lock to save space and prevent accidental injury.
• 【After-sales service】If you encounter any problems while using our products or are not satisfied with the products, please feel free to contact us. The THINKWORK after-sales team will contact you to resolve your issue in a timely manner.

User questions & answers

Question:	Hi, can this cut ABS black pipe
Answer:	Yes, I do it all the time, I install hvac pipe every day,and this tool is my main cutter,its a life and wrist saver. Highly recommended.
Question:	It is easy to cutter
Answer:	I used this for Copper pipe and it cut right through it with ease. I do not know why it would not cut a softer material. The only drawback that comes to mind is the thickness of the PVC.
Question:	Do you have to pull the handles apart to get the blade to open or is it sprung open
Answer:	Yes it will cut it but the blade wont last . now 2 tools in one there's the handle
Question:	How to open the blade, is it difficult
Answer:	Yes you can buy it separately. We got it at $ 21.5 Thanks America Tools

Product features

Unique sharp blade

The cutting machine is equipped with a sharp blade that ensures easy and fast direct and precise cutting, making your craft more refined.

On a sharp basis, the blade of the pipe cutting machine is not easily rusted after heat treatment, prolonging the service life.

Ergonomic design

Powerful ratchet drive technology, the original dual spring design allows you to cut with one hand.

The rubber handles fits perfectly into your hand, providing comfortable balance and control, helping to reduce fatigue in one-handed operation and making it easier to operate.

Do all sorts of cuts

With incredible versatility, they design for pipe applications.

Commonly used for cutting most plastics (PVC, CPVC, PP, PEX, PE, rubber hoses) and multi-layer pipes, used in a variety of applications to complete the project you need.

Safety concept

There is a stainless steel safety buckle at the bottom of the pipe cutting machine, which is firm and thick. When you are finished using it, you can buckle the safety buckle to avoid the danger of children touching.

Warm Tips

1.Do not use to cut metallic pipes or cable wire, which will damage your blade.

2.When using this Product in Winter it is Advisable to Put the Pipe in Lukewarm Water to Heat,this will Avoid Burst Pipes due to Cold Making Pipes Fragile for Cutting.

3.After use We Recommend Rustproof Oil is Applied to the Cutter.

4.In order to cut a perfect kerf, please keep kerf distance pipe mouth at least 1.5inch.

• Easily executes clean rounded cuts on copper, brass, aluminum，thin stainless steel,PVC,PE tubes from 1/8"-1-3/8" (3-35mm) O.D.
• Nice workmanship, included a spare blade and fold-away deburrer ensures a better connect and durability.
• Features the solid ergonomic X-CEL knob provides a firm grip. Cutting tubes become a comfortable and quick task.
• Well made of high-quality alloy steel grinding blades, extremely sharp.The body of the tubing cutter is made of lightweight,durable aluminum alloy casting.
• Use it easily with user manual. Wostore's products come with a lifetime warranty.

User questions & answers

Question:	I have used up the replacement wheel. Where can I get extras
Answer:	I have been useing them almost 2 yrs . Great in tight spaces great cutting wheel . Lennox makes good cutting tools . The only tool yet that i dont like is the 6 in 1 tool . The nut driver sucks. I now choose lennox over rigid
Question:	Will this cut acrylic tubing
Answer:	Far from it the general you could take that and through it in the trash it walks when you cut the lenox i use on a daily basis and has not walked on me yet! Hope this helps you ps get the lenox
Question:	Can this cut 1/8 inch stainless steel pipe
Answer:	When I bought mine there was 2 replacement wheels inside . And search Lenox tubing wheels and you find it on amazon
Question:	Will this cut through 3/16 stainless steel brake line
Answer:	No

Product features

Specification

• Suitable for 1/8"-1-3/8" (3-35mm) O.D. tubings.
• Alloy steel grinding blades extremely sharp.
• Aluminum alloy casting, lightweight and durable.
• Item Dimensions: 5.35" x 2.17" x 1.06"
• Item Weight: 0.49 lb (0.22 kg)

Suitable Tubing Material

• Easily executes clean rounded cuts on copper, brass, soft aluminum, thin stainless steel, PVC, PE tubes.
• Recommend wall thickness less than 0.059” (1.5mm).

Nice Workmanship

• Including a spare blade and fold-away deburrer ensures a better connect and durability.

Solid Ergonomic Knob

• Features the solid ergonomic X-CEL knob provides a firm grip.
• Ridiculously easy-to-use cutting tool. Cutting tubes become a comfortable and quick task.

How to get the replacement blade？

• Loosen the screw, you will get the extra blade which hided it in the handle.
• Special design allows you change the blade at any time.

How to get the replacement blade？

• Loosen the screw, you will get the extra blade which hided it in the handle.
• Special design allows you change the blade at any time.

How to get the replacement blade？

• Loosen the screw, you will get the extra blade which hided it in the handle.
• Special design allows you change the blade at any time.

How to get the replacement blade？

• Loosen the screw, you will get the extra blade which hided it in the handle.
• Special design allows you change the blade at any time.

Product description

Designed for optimal performance, the RIDGID 29963 Stainless Steel Tubing Cutter quickly and easily cuts stainless steel tube to the length you need. Featuring an innovative design, the tube cutter has 6 individual bearings that replace traditional rollers. These bearings create a smoother cut and allow for increased speed around the tube. Also, helping deliver a smoother cut, the specially designed stainless steel cutter wheel contains bearings in the hub, decreasing drag around the tube.

The tubing cutter has a contoured frame that allows for easy alignment while adjusting the cutter to make a cut, and it is equipped with an ergonomic knob for easy adjustments. Built for maximum performance, the cutter now includes an X-CEL knob design for quicker cutting.

This steel tube cutter has a 1/4-inch to 1-3/8-inch cutting capacity.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as that was first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 29963 35S Steel tubing cutter has been designed for optimized performance on stainless steel tubes. It has six-individual bearings that replace the traditional rollers. The bearings create a smoother cut and allow for increased speed around the tube. Also it has ergonomic knobs that allow for easy adjustments

• 6 individual bearings replace traditional rollers, creating a smoother cut and allowing for increased speed around the tube
• Contoured frame allows for easy alignment while adjusting the cutter to make a cut
• Features a specially designed stainless steel cutter wheel that contains bearings in the hub, decreasing drag around the tube for a smoother cut
• Ergonomic knob allows for easy adjustments
• Steel tube cutter has a 1/4-inch to 1-3/8-inch (6 mm to 35 mm) cutting capacity

User questions & answers

Question:	What size do they cut
Answer:	Yes.Easy to use Cutter! Improted Blade form Japan，I have strength problems with my hands, but this cutter is so easy to use and provides clean cuts on PVC pipes and plastic tubing every time. This has been an incredible time-saver in putting my automatic watering system together for my hydroponic vertical garden. I highly recommend this cutter and to me, worth every dollar. Just a great performing tool.
Question:	Can this be used for copper and aluminum as well
Answer:	Try the manufacture web site.
Question:	does anyone know the total width of the rollers
Answer:	Yes. I used this to make about 70 cuts on 1" pvc. Wear gloves. Sometimes the handles pinch at the end of the squeeze. I learned the hard way after the 1st 10. I like this pipe cutter because of the price, light weight and bright color. I like brighter color tools as I get older. Easier to find in the garage.
Question:	will this cut a schedule 40 1" steel pipe (OD
Answer:	Yes, I have used it on pex tubing.

Product features

RIDGID Model 35S Stainless Steel Tubing Cutter

These tubing cutters have been designed for optimized performance on Stainless Steel tube.

A contoured frame allows for easy alignment while adjusting the cutter to make a cut.

• Ergonomic knob allows for easy adjustments.
• Now includes X-CEL Knob for quicker cutting.
• Six individual bearings in the 15-SI and 35S and 12 in the 65S replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.
• Specially designed Stainless Steel cutter wheel in 35S and 65S contains bearings in the hub, to decrease drag around the tube for a smoother cut.

Product description

WE GINZORS, HAVE PERFECT CUSTOMER SERVICE: If You Have Any Problem, Please Contact us, We will Reply you in 12 Hours. If You do not Like it, Please Return it in 30 Days by Free Fee. If you pass 30 days, please contact us to refund shipping fee.



ITEM TYPE: Our PVC Pipe Cutter Max Opening 63mm, Cutting USA SCH40 Pipe Size of 1-1/2" and 2" PVC Pipe, Cutting pipes less than 2 inch in inner diameter.



HOW TO CHOOSE THE PVC CUTTER

1.The 42mm PVC Pipe Cutters can Cutting 1/2", 3/4", 1", 1-1/4" PVC Pipe.

2.The 63mm PVC Pipe Cutters can Cutting 1-1/2", 2" PVC Pipe.

3.So If You Need Cutting Large pipe, please Choose our Big size Cutter.



HOW TO USE THE PVC CUTTER

1.Open the Buckle

2.Gently Open the 2 Handle,The Ratchet Spring will Open the Blades.

3.Put the Pipe into the Blades,and Press the Handle to Cut.

4.If you not use,Please Lock the Buckle.



Attention:

1.When using this Product in Winter it is Advisable to Put the Pipe in Lukewarm Water to Heat,this will Avoid Burst Pipes due to Cold Making Pipes Fragile for Cutting.

2.If Edge of the Cutters are showing signs of Wear and Tear,Loosen the Fixing Screw,Remove the Blade and Replace with Same Type of Pipe Cutting Blade.

3.After use We Recommend Rustproof Oil is Applied to the Cutter.

• ♡ RATCHETING PIPE CUTTER: Newest Ratcheting Design is more Labor-saving and Convenient, Only One Hand is Needed to Complete the Cutting Operation Smoothly. The PVC Cutter is Suitable for Plumbers, Home Owner, Solar Company, Car Repair and Pipe Tube Repair.
• ♡ EXQUISITE WORKMANSHIP: Made of High Quality Manganese Steel, Hardness Hit HRC52, SK5 Teflon Blade is more Sharp, and Not Easy to Damage.
• ♡ USA STANDARD: Our PVC Pipe Cutter Max Opening 63mm, Cutting USA SCH40 Pipe Size of 1-1/2" and 2" PVC Pipe, Cutting pipes less than 2 inch in inner diameter.
• ♡ HUMANIZED DESIGN: Soft Rubber Handle are more Comfortable to Use, Stainless Buckle to Lock the Blades and Prevent to Cut Fingers.
• ♡ PERFECT CUSTOMER SERVICE: If You Have Any Complains, Please Contact us, We will Reply you in 12 Hours. If You do not Like it, Please Return it in 30 Days by Free Fee. If you pass 30 days, please contact us to refund shipping fee.

User questions & answers

Question:	will it cut PEX
Answer:	I’ve only used it on 1 1/2” plastic tubing, which it cuts easily.
Question:	I want cut my 1-1/2 inch pipe,is this competent
Answer:	Yes, it can operates with one hand. This pipe cutter features ratchet drive technology, an ergonomically designed handle with a lever principle and a lightweight design that make it easier to cut PVC pipes. This is a very convenient tool.
Question:	How big pipes does it cut
Answer:	I have to pull the handles apart.
Question:	is it easy to cut
Answer:	I am a woman. For me, it is easy to operate. First open the security lock, the handles on both sides will automatically pop open, then manually open the handle to the maximum extent, the blade will automatically open.

• [Large Cutting Capacity] Large tubing cutter cut through 3/16 to 2-inch outside diameter pipes with the thickness of 1/5-inch. Mini tubing cutter cut through 1/8 to 7/8-inch pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible.
• [Clean & Precise Cut] EZARC professional copper pipe cutter set of 6 individual bearings allowing for increased speed and precise rolling control to make every cut smoother and more accurate in pipe cutting.
• [Durability & Practicality] Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications.
• [Various Cutting Materials] Our copper pipe cutter is suitable for cutting materials with an outer diameter from 1/8" to 2".And this tube cutter tool is perfect for cutting heavy-duty hard material like thin stainless steel, all soft tubes like aluminum, copper, and PVC. Our pipe cutters cut PVC in emergency situations.
• [Lifetime Warranty] EZARC covers its general pipe cutter tool with a quality warranty against defects in material or workmanship for the life of the tool. If you have any questions, please feel free to contact us. We want our customers to be 100% satisfied.

User questions & answers

Question:	Will the heavy duty cutter cut 1-in schedule 40 aluminum pipe (1.315" OD, 0.133" wall thickness
Answer:	Dear customer, Sorry to tell you that no extras to buy because we have not in our hands at present. Extra blade will be purchased in a few days after consulting with our factory, who are now in holiday. Meanwhile, for our dear previous customer, you can enjoy exclusive discount code , if need, please contact customer service center: [email protected].
Question:	can I get a part number for the replacement blades
Answer:	Yes, it can cut acrylic tubing which thickness less than 3mm.
Question:	Which application is the small pipe cutter suitable for
Answer:	As smooth as butter
Question:	Are extra cutter wheels provided? Where can you purchase them
Answer:	Yes it will

Product features

EZARC Tube Cutter Set 2 Pack

Color: Red

Material: Alloy & steel

Application: Thin stainless steel and all soft tubes like aluminum, copper and PVC with thickness of 2.5 to 5mm.

Scope of application: Tubing cutter 5mm to 50mm / Mini tubing cutter 3mm to 22mm

Net weight: 590g

Gross weight: 642g

Clean and Precise Cut

Built with precise SKD steel for long-term durability and cleaner cuts.

Features Roller Bearing

Features thrust-bearing feed mechanism for smooth cutting.

Large Knurled Feed Screw Knob

Bottom rotating wheel adjusts the cutter to the proper fit in a seamless smooth movement.

Nice Workmanship

You need the mini tubing cutter in your toolbox, Compact design make it very easy storage and portability

Scope of Application

EZARC Mini tube cutter has a 1/8inch to 7/8inch cutting capacity, its scope of application is 3 to 22mm. It is quite suitable for use with hard and soft copper, aluminum, brass and plastic.

Great for Restricted Spaces

Specifically designed for use in restricted spaces on small diameter tubing, the EZARC Mini Tubing Cutter makes tight cutting jobs easier.

Improve work efficiency, durable and ideal accessories for cutting.

• Rugged aluminum alloy body designed for handling ease.
• Cutter wheels are made of the highest quality wear and abrasion-resistant SKD steel.
• Features thrust-bearing feed mechanism for smooth cutting.
• Mini tube cutter specifically designed for use in restricted spaces.

Scope of Application

Product description

A practical tool for use in tight and cramped spaces, the RIDGID 86127 Close Quarters Tubing Cutter is a must have for any plumber's toolbox. This tube cutter is specially designed for use in restricted spaces on small diameter tubing. Constructed for durability and ease of use, it has strong yet lightweight slide and wheel housing and a large knurled feed screw knob that provide easy control of cutting pressure for clean cuts.

Model 118 features a special knob for easier tightening of the feedscrew, and a self-feeding AUTOFEED cutter wheel that automatically cuts after tightening the knob only once.

This metal tube cutter has rollers with grooves for close-to-flare cuts, and includes a spare cutter wheel in the knob for maximum uptime.

This RIDGID copper tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 86127 close quarters quick-feed cutter is specifically designed for use in restricted spaces on hard and soft copper, aluminum, brass and plastic tubing. It has a strong, lightweight slide and wheel housing with a large knurled feed screw knob that gives the user easy control of cutting pressure for cleaner cuts. It includes a self-feeding cutter wheel that automatically cuts after tightening the knob only once.

• Specifically designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
• Strong and lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
• Includes a self-feeding AUTOFEED cutter wheel that automatically cuts after tightening the knob only once
• Model 118 features a special knob for easier tightening of the feedscrew and includes a spare cutter wheel in the knob
• Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity

User questions & answers

Question:	Can this be used for glass? Or maybe is there a blade replacement that will work for glass
Answer:	the unit i have is marked 1/4" to 1 3/8" od - i used it on 1" stainless steel tubing and was very pleased with performance.
Question:	is this manufactured in the USA
Answer:	Yes
Question:	Where can buy cutting wheel
Answer:	They measure out at about 0.69 inches or 17 millimeters.
Question:	Hi, can it be used to cut 3/4" or 1" conduit? Thanks
Answer:	If it helps at all I purchased a 10' stainless steel fence pipe from lowes 1 3/8 and it took me less than a minute to cut through it using this device....Perfect clean cut

Product features

RIDGID 86127 Model 118 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter

Specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing.

• Rollers include grooves for close-to-flare cuts on models 101, 101J and 118.
• Strong, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts.
• Models 117 and 118 include a self-feeding AUTOFEED cutter wheel that automatically cuts after tightening the knob only once.
• The Model 118 features a special knob for easier tightening of the feedscrew.

• Ideal for fast, clean pipe cutting by hand or power
• Features an extra-long shank that protects adjustment threads
• Extra-large handle allows for quick and easy adjustments
• Can be converted to 3-wheel cutter by replacing rollers with cutter wheel
• Pipe cutter has a 1/8-inch (3 mm) to 2-inch (50 mm) pipe capacity

User questions & answers

Question:	Will this cut 3" Schedule 40 steel pipe (3.5 in diameter
Answer:	yes, it cuts PEX, PPR, PVC, Aluminium Plastic Pipe and other hose.
Question:	What size cutter wheel does this take? Can I replace with Rigid cutter wheels
Answer:	hello sir, I am seller, please choose our 63mm cutter, it can cut the 1-1/2 inch pipe.
Question:	Will this cut iron pipes
Answer:	Our PVC Pipe Cutter Max Cutting 42mm,Cutting USA SCH40 Pipe Size of 1/2", 3/4", 1", 1-1/4" PVC Pipe. Our PVC Pipe Cutter Max Cutting 63mm,Cutting USA SCH40 Pipe Size of 1-1/2" and 2" PVC Pipe.
Question:	Will this cut 3 inches metal fence post
Answer:	it is light weight and easy to cut by one hand only.

Product features

How to Using

Put the tube on the place between the cutter wheel and rollers. Switch the feed wheel to provide the pressure and until the pipe cut.