10 best gen tube cutters

Product description

General Wire (453210) SUS SuperSlice Plastic Tubing Cutter for up to 1" Plastic Tubing, (Must Order In Multiples of 10)

• 1 EACH
• 1" Plastic Tubing
• Model No: SUS
• item package weight: 9.6 ounces

User questions & answers

Question:	Will this fit 11mm dovetail
Answer:	Don't know . Used is for pellet rifle
Question:	Since this was designed for a reverse recoil rifle are the supplied rings designed for droop compensation
Answer:	Don't know , it was a gift & it was mounted on a pellet rifle
Question:	I’m trying to register this scope for the 1 year warranty. Where do I find the serial number
Answer:	I purchased the scope for a 22 rifle but I also would have purchased it for a break-barrel air rifle being a Springer or a gas piston. The scope to my knowledge is made for both rifles. The scope ring does have a set screw that holds it to the receiver. You should check to see that the receiver is drilled to accept this. If it is then I believe this scope should work fine with your air rifle. Tighten the ring above the drilled hole and then use the provided Allen wrench to set the screw. Tighten it flush with the ring and no further so that it does not interfere with the spring.
Question:	Will this scope hold zero on a 300 win mag
Answer:	Funny you ask. I use the standard Ruger dovetail/weaver mount on my 10/22. This scope is on my squirrel rifle(10/22 with hogue stock, Winchester bipod and BX-25 magazine)
Question:	What size mounts needed for the included rings
Answer:	It does not come with a sunshade. While it is threaded, BSA uses a trim ring threaded onto the tube that has the details about the scope magnification, tube size, etc. The ring is more than hand tight so I'm not sure that it could be removed without damage to install a 44mm sunshade. If you are willing to potentially damage the trim ring and/or the bell you might be able to remove it and install a sunshade if you really need one.

Product features

BSA Optics Outlook 3-9X40 Air Rifle Scope

The new OUTLOOK series air rifle scopes were specifically designed to withstand the reverse recoil found in the most powerful air rifles. Feature rich, this series offers fully multi-coated lenses, fast focus, and adjustable objective, low profile zero-reset turrets, and a Mil-Dot reticle. This series comes standard with 2 piece dovetail rings. Matte black finish. Waterproof, Shockproof and Fogproof

Magnification low: 3; Magnification high:9

Objective lens diameter 40 mm

Adjustment MOA: 1/4

Lens Material: Glass; Lens: Fully Multi-Coated

W/E Range: 35; Eye Relief: 3.7-4 inches

FOV LOW @ 100' (ft): 34.5; FOV HIGH @ 100' (ft): 11

PARALLAX SETTING (yds): 10 to Inf.

Reticle: Mil-Dot

Shockproof, Fogproof, Waterproof

Tube diameter: 1", one piece; Aluminum Construction. Adjustable Objective.

Product description

Designed for optimal performance, the RIDGID 29963 Stainless Steel Tubing Cutter quickly and easily cuts stainless steel tube to the length you need. Featuring an innovative design, the tube cutter has 6 individual bearings that replace traditional rollers. These bearings create a smoother cut and allow for increased speed around the tube. Also, helping deliver a smoother cut, the specially designed stainless steel cutter wheel contains bearings in the hub, decreasing drag around the tube.

The tubing cutter has a contoured frame that allows for easy alignment while adjusting the cutter to make a cut, and it is equipped with an ergonomic knob for easy adjustments. Built for maximum performance, the cutter now includes an X-CEL knob design for quicker cutting.

This steel tube cutter has a 1/4-inch to 1-3/8-inch cutting capacity.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as that was first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 29963 35S Steel tubing cutter has been designed for optimized performance on stainless steel tubes. It has six-individual bearings that replace the traditional rollers. The bearings create a smoother cut and allow for increased speed around the tube. Also it has ergonomic knobs that allow for easy adjustments

• 6 individual bearings replace traditional rollers, creating a smoother cut and allowing for increased speed around the tube
• Contoured frame allows for easy alignment while adjusting the cutter to make a cut
• Features a specially designed stainless steel cutter wheel that contains bearings in the hub, decreasing drag around the tube for a smoother cut
• Ergonomic knob allows for easy adjustments
• Steel tube cutter has a 1/4-inch to 1-3/8-inch (6 mm to 35 mm) cutting capacity

User questions & answers

Question:	What size do they cut
Answer:	Yes.Easy to use Cutter! Improted Blade form Japan，I have strength problems with my hands, but this cutter is so easy to use and provides clean cuts on PVC pipes and plastic tubing every time. This has been an incredible time-saver in putting my automatic watering system together for my hydroponic vertical garden. I highly recommend this cutter and to me, worth every dollar. Just a great performing tool.
Question:	Can this be used for copper and aluminum as well
Answer:	Try the manufacture web site.
Question:	does anyone know the total width of the rollers
Answer:	Yes. I used this to make about 70 cuts on 1" pvc. Wear gloves. Sometimes the handles pinch at the end of the squeeze. I learned the hard way after the 1st 10. I like this pipe cutter because of the price, light weight and bright color. I like brighter color tools as I get older. Easier to find in the garage.
Question:	will this cut a schedule 40 1" steel pipe (OD
Answer:	Yes, I have used it on pex tubing.

Product features

RIDGID Model 35S Stainless Steel Tubing Cutter

These tubing cutters have been designed for optimized performance on Stainless Steel tube.

A contoured frame allows for easy alignment while adjusting the cutter to make a cut.

• Ergonomic knob allows for easy adjustments.
• Now includes X-CEL Knob for quicker cutting.
• Six individual bearings in the 15-SI and 35S and 12 in the 65S replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.
• Specially designed Stainless Steel cutter wheel in 35S and 65S contains bearings in the hub, to decrease drag around the tube for a smoother cut.

• [Large Cutting Capacity] Large tubing cutter cut through 3/16 to 2-inch outside diameter pipes with the thickness of 1/5-inch. Mini tubing cutter cut through 1/8 to 7/8-inch pipes with a maximum thickness of 1/10-inch especially for use in restricted areas where a complete turn is not possible.
• [Clean & Precise Cut] EZARC professional copper pipe cutter set of 6 individual bearings allowing for increased speed and precise rolling control to make every cut smoother and more accurate in pipe cutting.
• [Durability & Practicality] Heat treated alloy steel cutting wheel and high-grade steel construction make our heavy-duty copper tubing cutters perfect for plumbing, electrical, air conditioner installation, automotive, and DIY applications.
• [Various Cutting Materials] Our copper pipe cutter is suitable for cutting materials with an outer diameter from 1/8" to 2".And this tube cutter tool is perfect for cutting heavy-duty hard material like thin stainless steel, all soft tubes like aluminum, copper, and PVC. Our pipe cutters cut PVC in emergency situations.
• [Lifetime Warranty] EZARC covers its general pipe cutter tool with a quality warranty against defects in material or workmanship for the life of the tool. If you have any questions, please feel free to contact us. We want our customers to be 100% satisfied.

User questions & answers

Question:	Will the heavy duty cutter cut 1-in schedule 40 aluminum pipe (1.315" OD, 0.133" wall thickness
Answer:	Dear customer, Sorry to tell you that no extras to buy because we have not in our hands at present. Extra blade will be purchased in a few days after consulting with our factory, who are now in holiday. Meanwhile, for our dear previous customer, you can enjoy exclusive discount code , if need, please contact customer service center: [email protected].
Question:	can I get a part number for the replacement blades
Answer:	Yes, it can cut acrylic tubing which thickness less than 3mm.
Question:	Which application is the small pipe cutter suitable for
Answer:	As smooth as butter
Question:	Are extra cutter wheels provided? Where can you purchase them
Answer:	Yes it will

Product features

EZARC Tube Cutter Set 2 Pack

Color: Red

Material: Alloy & steel

Application: Thin stainless steel and all soft tubes like aluminum, copper and PVC with thickness of 2.5 to 5mm.

Scope of application: Tubing cutter 5mm to 50mm / Mini tubing cutter 3mm to 22mm

Net weight: 590g

Gross weight: 642g

Clean and Precise Cut

Built with precise SKD steel for long-term durability and cleaner cuts.

Features Roller Bearing

Features thrust-bearing feed mechanism for smooth cutting.

Large Knurled Feed Screw Knob

Bottom rotating wheel adjusts the cutter to the proper fit in a seamless smooth movement.

Nice Workmanship

You need the mini tubing cutter in your toolbox, Compact design make it very easy storage and portability

Scope of Application

EZARC Mini tube cutter has a 1/8inch to 7/8inch cutting capacity, its scope of application is 3 to 22mm. It is quite suitable for use with hard and soft copper, aluminum, brass and plastic.

Great for Restricted Spaces

Specifically designed for use in restricted spaces on small diameter tubing, the EZARC Mini Tubing Cutter makes tight cutting jobs easier.

Improve work efficiency, durable and ideal accessories for cutting.

• Rugged aluminum alloy body designed for handling ease.
• Cutter wheels are made of the highest quality wear and abrasion-resistant SKD steel.
• Features thrust-bearing feed mechanism for smooth cutting.
• Mini tube cutter specifically designed for use in restricted spaces.

Scope of Application

Product description

A handy addition to any toolbox, the RIDGID 30088 Ratcheting Plastic Pipe and Tubing Cutter has a large 2-3/8-inch O.D. capacity that allows you to effortlessly cut plastic and multilayer tubing to the length you need. The pipe cutter has an X-CEL quick change blade design for tool-free blade changes in seconds, without any lost clips or misplaced screws.

This advanced blade design combined with the ratcheting mechanism reduces the amount of hand force needed to cut through hard plastic material. As a result, the "burr-less" cutting operation provides a square cut with less effort.

Handy ergonomic grips on the bottom handle are spaced at 1⁄2-inch increments, acting as a quick pipe measuring scale. Built to last, the ratcheting tubing cutter is constructed of durable aluminum suitable for heavy-duty use, and it has easily replaceable cutting blades.

With its 1/8-inch to 2-3/8-inch O.D. capacity, the RC-2375 pipe cutter easily cuts plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing making it an ideal pvc pipe cutter.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance, as that was first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 30088 RC-2375 Plastic pipe and tubing cutter is made of durable aluminum for heavy-duty uses and has ergonomic grips on the bottom handle that are spaced at 1/2-Inch increments to act as a quick pipe measuring scale. Also it has an easy turn-thumb latch for reliable storage and X-CEL quick change blades

• Designed to cut plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing
• Features an easily replaceable X-CEL quick change blade
• "Burr-less" cutting operation delivers a square cut with less effort
• Sturdy aluminum construction suitable for heavy-duty use
• Tubing cutter has a 1/8-inch to 2-3/8-inch (3 mm to 63 mm) outer diameter capacity

User questions & answers

Question:	where was item made
Answer:	The rings for the BSA scopes are not designed to compensate for barrel droop.
Question:	how close to the end to you think you can cut without breakage
Answer:	The serial number will be on the bottom side of the scope.
Question:	Hello, Where is this made
Answer:	A 300 Winchester Magmum is a very powerful cartridge, and the recoil will be severe. Ask the manufacturers this question. Many will say yes, but not for long.
Question:	Will this cut sch 80 pipe
Answer:	The tube of the scope is 1 inch, so rings with a 1 inch hole is needed. Since the objective is 40mm in diameter, so rings of medium height are needed so the objective will clear the baseline. So, 1 inch medium rings are needed.
Question:	Is the cutter self adjusting
Answer:	Sfp
Question:	Can this be used to cut residential black steel water pipe
Answer:	The front outside diameter is 42.40mm and the rear is 44.02mm (measured with calipers) hopefully this helps!
Question:	I have 1" betwen the edge of the 1/2" copper pipe and a stud. Its on the side. Will this work
Answer:	I bought mine in 2015; it had no rubberized finish.
Question:	How can i cut 3/16 tube? in description it says it can cut 1/8 inch, but on the package it says 8mm. How do i cut 3/16 which
Answer:	This scope is designed for use with standard LR trajectories. It doesn't have a preset setting for WMR cartridges. It works well with standard 34, 36, and 40 grain bullets, of standard LR loads. This scope doesn't factor in any .22 Magnum loads.

Product features

Ridgid RC-2375 Ratchet Action 2" Pipe and Tubing Cutter

• Ergonomic grips on bottom handle are spaced at 1⁄2" increments to act as a quick pipe measuring scale.
• X-CEL quick-change blade.
• “Burr-less" cutting operation provides a square cut.
• Intended materials: Plastic (PVC, CPVC, PP, PEX, PE, rubber hose) and multilayer tubing.

• 2 pack of Replacement Blades for this tube Cutter.
• The rollers and the blade utilize ball bearings for smoother action.
• Made from aluminum alloy and Wear-resistant steel blades ensures a durable and sturdy usage.
• Capacity from 3/16-inch-1-1/4-inch (4-32mm). Adjustable cutting depth designed for fast and safe cutting.
• With clean, no burrs and smooth cuts on copper tubing and stainless steel tubing without deforming the peaks of corrugations.

User questions & answers

Question:	will it cut brass tubes
Answer:	Yes. I used it to cut copper lines running to my hotwater heater.
Question:	Will this cut EMT conduit
Answer:	Yea
Question:	Were do they sell extra cutting wheels
Answer:	I assume you can order them from Amazon. A hardware store, maybe?
Question:	Does this cutter work on oval stainless steal rods used for closets
Answer:	I'm not sure but I cut 1/2"- 3/4" stainless steel tubing at my job. It's a good tubing cutter plus it comes with 3 extra blades

Product features

About IWISS

IWISS Tools, founded in the year of 2008, has established two production bases to manufacture pipe tools and cable tools respectively by 2013. We're frequent exhibitor of American AHR Expo and National Hardware Show, Mexican Expo Guadalajara, Australian ARBS, Italian MCE Expocomfort, Russian Auqatherm Moscow and Chinese Canton Fair.

Product description

With a simple wheel change, Quick Release cutters can be used for a variety of plastic pipe including PVC, CPVC, PE, PP and ABS. Reed Manufacturing has been producing fine tools for worldwide professional trades since its founding, in 1896, by Carl Reed. Reed celebrates its 118th year of business in 2014. From the company's beginning, Reed associates have invented tools that continually become industry standards, including the Quick Release Tubing Cutter, various tools for plastic pipe, vises, plus Hinged Cutters and Rotary cutters for large diameter pipe.

• O.D. Capacity: 1-7/8 to 4-1/2"
• O.D. Capacity: 48 to 114 mm
• For cutting PVC
• Best tracking, easiest cutting tubing cutters available
• Replace worn cutter wheels for longer tool life and faster cuts

User questions & answers

Question:	im looking to cut 3/4"-2" sched 40 pvc in a plumbing application. does this tool cut 1/2"? does it cut 2" very easily
Answer:	I am not sure where it is made, but it is high quality & works great.
Question:	Can this tool cut 8" schedule 80 pink pipe
Answer:	Yes, but it depends on the type of pipe. For example it'll cut 2" abs pipe at schedule 80 fine, but pipe types like aqua rise dull the blade fast and I've seen system 15 pipe actually break the ratcheting part of the tool rendering it useless. I've never used it with pvc, but I assume itd be fine
Question:	Can this tool cut aluminum tubing
Answer:	No. You turn the knob. This cutter is great. it takes a little getting used to. Cuts up to 1 1/8. I really recommend. Better than those one size self adjusting cutters
Question:	Does it come with only 1 blade
Answer:	Yes but you will wear out cutting wheels pretty quick. I used it to cut Steel Conduit but black pipe is harder. Personally I would invest in a larger cutting tool made for black pipe
Question:	Where do you get extra wheels for this cutter
Answer:	No, it's too wide. You need a 57008 Ridgid or one like it. It fits 1/2" or 3/4" tubing, is self-tightening and has little slots to use a screwdriver to turn it, if the space is too tight. If you want a cutter like the 133, buy the General 135 instead. It is vastly superior because the tightening knob is on the bottom instead of the side. I have one and use it all the time.
Question:	How much clearance does the cutter need to function
Answer:	Vladimir, I don't really have a direct answer, but I would say that this tool is really kind of large for cutting 3/16" tubing. I would look for a smaller tubing cutter that is easier to handle for cutting tubing that small. 8mm is about the same as 5/16" and I think that would be a lower limit for this tool. Even then, I think this would be hard to control when cutting such small tubing. I have only used this tool to cut 1/2" tubing and it worked really well. I haven't needed to use the ratcheting feature, but I did experiment with it a little. There is limited use for the ratchet feature, but if you ever needed it, it would be a big time saver.
Question:	Is the cutter polished aluminum like in the picture or is it cast aluminum like I've seen in other sales posts
Answer:	This scope will fit that size.

Product features

Reed Tool

Reed Manufacturing has been producing fine tools for worldwide professional trades since its founding, in 1896, by Carl Reed. Reed celebrates its 119th year of business in 2015. From the company’s beginning, Reed associates have invented tools that continually become industry standards, including the Quick Release Tubing Cutter, various tools for plastic pipe, vises, plus Hinged Cutters and Rotary cutters for large diameter pipe.

Product description

TOLESA tube cutter set is a must have tool for handy men such as plumbers, electricians, mechanics and HVAC installers who need to cut pipes and tubing for their projects.

Product Specification



Quantity in Box: 2 pcs

[Heavy Duty Tube Cutter]

Sturdy, lightweight slide and wheel housing, and large knurled feed screw knob give easy control of cutting pressure for clean cuts, suitable for heavy duty cutting work on aluminum, copper, thin-walled stainless steel pipes and other thin pipes or tubes.



Dimension: 7.4 inch x 2.6 inch x 1.5inch

Weight: 2 pounds

Application range: 3/16 to 2 inch (5-50mm)

Material: Alloy Steel Blade with Aluminum Structure

Cutting Material: Aluminum, Copper, PVC and Thin Stainless Steel Tube

[Pipe Reamer]

The Reamer has the advantages of convenient carrying, small and light. It is ideal for reaming on copper, aluminum, brass and soft steel tubing. It reams quick, clean, easy inside and outside diameter beveling of tubes. Sturdy plastic construction with long-wearing alloy steel blades can extend lifetime.

Material: Sturdy plastic construction with long-wearing alloy steel blades

Cutting Material: Aluminum, Copper and PVC Tube

• ✅【Durable Material】 TOLESA tube cutter is made of aluminum alloy and wear-resistant steel blades, and cuts on tubing from 3/16 to 2-inch.
• ✅【Precise Cutting】 TOLESA pipe cutter uses 6 individual bearings design so that increases speed and keeps precise rolling control to make cut smoother and more accurate in pipe cutting.
• ✅【Various Applictions】 Heavy duty tube cutter applies for hard material like Aluminum, Copper, and Thin Stainless Steel Tube from 1/8 to 2-inch.
• ✅【Perfect Set】 This set incluedes a heavy duty tube cutter and an inner-outer reamer. It can not only meet your pipe cutting needs, but also fast clean inner reaming and outer deburring needs.
• ✅【Sturdy Reamer】 Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. Reamer is ideal for reaming on copper, aluminum, brass and soft steel tubing. It reams quick, clean, easy inside and outside diameter beveling of tubes. Sturdy plastic construction with long-wearing alloy steel blades can extend lifetime.

User questions & answers

Question:	Incluye disco de repuesto
Answer:	ABS about 1/2 from end. Sch 40 PVC 2"-4" from end and very slow. Spray WD-40 on the blade, it helps

Product features

TOLESA Tube Cutter Set

Applications

6-Piece Roller Bearing

6 individual bearings increase the speed and precise rolling control to make every cut smoother and more accurate in pipe cutting.

SKD Cutter Wheel

Wear-resistant steel blades make our tubing cutter heavy duty for plumbing, electical, air conditioner installation, automotive and DIY applications.

Large Ergonomic Knob

Bottom rotating knob adjusts the tube cutter to the proper fit in a seamless smooth movement.

TOLESA Pipe Reamer is ideal for reaming on stainless steel and copper tubing

Pipe reamer has 3/16 to 1-5/16 inch outside diameter capacity. Reamer is ideal for reaming on copper, aluminum, brass and soft steel tubing. It reams quick, clean, easy inside and outside diameter beveling of tubes. Sturdy plastic construction with long-wearing alloy steel blades can extend lifetime.

Product description

The Klein Tools Professional Tubing Cutter features an accurate 4-roller tracking system. This keeps the tube from threading and helps eliminate spiraling. This professional reaming tool is great for HVAC work. Cuts 1/8-Inch to 1-3/8-Inch steel and copper tubing. Employs accurate 4-roller tracking system to eliminate spiraling. Large handle is comfortable and easy to turn. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Accurate 4 roller tracking system - no spiraling
• Professional reaming tool
• Extra cutting wheel included; simply remove screw in the back and open the handle to access
• Replacement cutting wheel available (Cat. No. 88905)

User questions & answers

Question:	What is the maximum wall thickness of the tubing it can cut
Answer:	the thickness of steel conduit wall. It is a heavy duty tubing cutter.
Question:	Can this cut stainless steel tubing
Answer:	I was able to cut 15/16" OD steel conduit. I don't know about stainless steel.
Question:	is this made in the USA
Answer:	its made in spain, if it helps i have been in construction 41 years and this is the best cutter i had yet, the built in reamer works so good.
Question:	Does it cut emt? And does tje reamer work or is it junk
Answer:	I have been in the construction since 1980, I do commercial electrical work , all my life I gave rigid cutter a go for, bit this is way better then rigid cutter- the 4 wheel is a great improvement over the two wheel rigid had, with this cutter you can go left or right without it walking. the reamer is most definitely the best feature, and yes it really works. I even ream emt with wire in the pipe, just go slow and move wires as you turn. cost a bit more than rigid, but you wont be sorry if you get it.

Product description

A handy tool for working in tight and cramped spaces, the RIDGID 40617 Close Quarters Tubing Cutter is a must have for any plumber's toolbox. This tube cutter is specially designed for use in restricted spaces on small diameter tubing. Rollers feature grooves for close-to-flare cuts. Constructed for durability and ease of use, it has strong yet lightweight slide and wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

The metal tube cutter includes a spare cutter wheel in the knob for maximum uptime.

This RIDGID tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and effectively cuts hard and soft copper, aluminum, brass and plastic tubing.

RIDGID covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Since 1923, RIDGID has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the RIDGID brand is engineered to the same high standards of quality, strength and endurance, as was that first heavy-duty pipe wrench more than 80 years ago.

From the Manufacturer

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades. Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. The Ridgid 40617 is a tubing cutting with a capacity of 1/2-Inch to 2-Inch and is specifically designed for use in restricted spaces on small diameter, hard and soft copper, aluminum, brass and plastic tubing; rollers include grooves for close-to-flare cuts. It has a strong, lightweight slide and wheel housing, large knurled feed screw knob gives easy control of cutting pressure for clean cuts. This cutter includes a spare cutter wheel in the knob

• Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing
• Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts
• Rollers include grooves for close-to-flare cuts
• Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity
• Includes spare cutter wheel in knob

User questions & answers

Question:	Will this work on fiber glass arrows
Answer:	The tig torch will have a separate outside gas hose to use while the MIG is all internal
Question:	Can this cut most pipes
Answer:	3-year warranty
Question:	I'm digging up a water main that's copper and is thicker than hvac copper. Will this cut it nice and clean? It's
Answer:	Yes this machine can run with 7018 electrodes.
Question:	Can this cut 1" brass pipe? The Outside diameter of 1" brass pipe is 1.32". Thanks
Answer:	Hello, Thank you for your message. The welder that you are referring to can weld up to 3/8” thick steel. Regards,

Product features

Achieve Clean Cuts in Tight and Cramped Spaces

An essential tool for working in tight and cramped spaces, the RIDGID 101 Close Quarters Tubing Cutter is a handy tool for any plumber's toolbox. With tough cutting jobs in mind, this metal tube cutter is specially designed for use in restricted spaces on small diameter tubing. Constructed for durability and ease of use, the tube cutter has strong yet lightweight slide-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Ideal for Restricted Spaces

RIDGID Close Quarter Tubing Cutters are specifically designed for use in tight and cramped spaces on small diameter tubing.

Durable and Easy-Use Design

Tube cutter features a strong yet lightweight slide­-and-wheel housing and a large knurled feed screw knob that produces clean cuts through easy control of cutting pressure.

Grooved Rollers

For added versatility, the rollers on this tubing cutter feature grooves that allow for close-to-flare cuts.

Works with a Variety of Materials

The RIDGID 101 tubing cutter has a 1/4-inch to 1-1/8-inch cutting capacity and is suitable for use with hard and soft copper, aluminum, brass and plastic.

Handy Spare Wheel

The 101 metal tube cutter works with the RIDGID E3469 Cutter Wheel; tube cutter includes a convenient spare cutter wheel in the knob for maximum uptime.

Full Lifetime Warranty

RIDGID tools are built to last and come standard with the best warranty in the industry. Our reputation for superior quality and durability allows us to stand behind our tools with the RIDGID Full Lifetime Warranty against defects in workmanship and material. Should your tool ever malfunction from defects in workmanship or materials, we will repair or replace the tool free of charge.

Product description

If you’re working with pipes, you’ll need to cut them at some point. Whether you’re a plumber, HVAC specialist, boiler worker, or other industrial worker, you’ll benefit from Milwaukee’s 12 Volt lithium ion copper pipe cutter. Rather than hack through your tubing with a handsaw or other crank-operated hand tool, simply pull the trigger on this powerful device and you’ll be able to rip through 3/8" to 1” piping with ease. Don’t worry about adjustments, because the 2471-20 will do it for you. Simply hold it over the pipe, press the trigger, and hold on until the unwanted end of your pipe falls away. Its motor runs at up to 500 RPM, so you know you’ll be able to tear through it with ease. Damp environments won’t weaken the strength of this tool, either. Its insulated design keeps water out of the motor and other moving parts, letting you focus completely on the task at hand without fear of unnecessary wear. While it works best with the 12V Red Lithium line of batteries, this cutter will function with the other 12 Volt lithium ion or NiCad batteries offered from Milwaukee (batteries not included). For industrial applications where time and quality are of the essence, look no further than the Milwaukee 2471-20 to fulfill your needs with ease.

From the Manufacturer

Milwaukee Electric Tool Corporation introduces the industry's first M12 Copper Tubing Cutter, specifically designed for cutting copper with the speed and versatility that plumbers, mechanical contractors and remodelers require. With a 12-Volt LITHIUM-ION battery and ultra efficient gearing, the 2471-22 performs over 200 cuts on a single charge. A close-Quarter rotating head cuts installed copper tubing with as little as 1-1/2-Inch of clearance. At 500 RPM, the patent pending cutting mechanism cuts copper tubing up to 10X faster than conventional cutters and automatically adjusts diameter to cut through 3/8" – 1" copper tubing (1/2-Inch – 1 1/8" OD, Type K, L and M). The inline design offers greater reach and reduced wrist strain in confined spaces. The metal cutting head is corrosion and rust resistant and is sealed for protection from water. Electronic overload protection and uni-body construction provide exceptional durability. Additional features include a battery fuel gauge, which displays the remaining run-time and a built-in LED work light which illuminates the work surface. Backed by Milwaukee's 5-Year tool warranty.

• AUTOMATIC ADJUSTMENT: Wrap this around type K, L, and M copper pipes and it will adjust from between 3/8" and 1” automatically
• WATER RESISTANT: The head of the unit is sealed tightly to prevent water from leaking in and damaging the motor. Ideal for plumbing applications
• HIGH POWERED MOTOR works at up to 500 RPM, letting you work up to 10 times faster than standard hand-operated pipe cutters or saws
• LOW CLEARANCE: You can use this with piping that is as little as 1 1/2“ away from a wall without risk of damage to the tool or pipe
• RED LITHIUM COMPATIBLE: This tool will function with the batteries in the Milwaukee M12 lineup. These include the 48-59-1201, 48-11-1970, 48-11-2401, 48-11-2430, 48-11-2460, 48-11-2420, 48-11-2402, and 48-11-2440

User questions & answers

Question:	Can you use the m18 red lithium xc 5.0 battery in this tool
Answer:	No. this is a 12 volt tool
Question:	Will this cut 1" copper that is slightly out of round I can do it was regular cutters is just a pain
Answer:	not sure. never tried on out of round pipe
Question:	Will it work on 3/4 PVC plastic pipe
Answer:	I don't think so but probably it will takes like 5 or 10 minutes when with a PVC cutter takes 2 seconds for around 8 or 10 bucks. Even with a handsaw it's faster. Reason: it's intended to be used for copper pipes from 1/2 to 1 inches.
Question:	I bought the cutter. Love it. I used it with alittle water in the line and the unit stopped working for 24hrs. Any idea why
Answer:	This must be some type of safety feature because it has happened to me before where it will just stop working for a while. Then it will come back on every time.