6 best record bolt cutters

Product description

IRWIN Record Arm Adjusted High Tensile Bolt Cutters have jaws that are specially heat treated for cutting very hard materials up to a hardness of Brinell 500 (Rockwell C52, 110 tons/square in). The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire, high tensile steel rods, bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire.IRWIN Record 930H Arm Adjusted High Tensile Bolt Cutter 760mm (30 in).Overall Length: 760mm (30 in).Max Cutting Capacity: 9.5mm (3/8 in). 930H Arm Adjusted High Tensile Bolt Cutter 760mm (30in)

• It has jaws that are specially heat treated for cutting very hard material
• Can cut up to a hardness of Brinell 500
• The centre cut jaws have a short nose for trouble-free cutting of pre-stressed concrete reinforcing rods, mesh and wire
• It can also cut bolts and case hardened chain, cold drawn alloy steel and tempered sprung wire
• 9.5mm maximum cutting capacity

Product description

IRWIN Record End Cut BC924E Bolt Cutter 610mm (24 in) is a end cutting cam adjusted (BC series) special design for quick simple adjustment, yet still offering heavy-duty cutting performance and hard working reliability. The lighter handle construction is ideal for difficult or uncomfortable situations.Designed to allow close cutting when side access is restricted and a clipper cut cannot be used. Cutting Capacity: 11.1mm (7/16in). End Cut BC924E Bolt Cutter 610mm (24in)

• It is special design for quick simple adjustment, yet still offering heavy-duty cutting performance and hard working reliability
• The lighter handle construction is ideal for difficult or uncomfortable situations
• Designed to allow close cutting when side access is restricted and a clipper cut cannot be used
• 11.1mm cutting capacity
• 610mm overall length

Product description

The IRWIN Tools TTBC918 Record General Purpose Cam-Adjusted Tubular Handle Bolt Cutter is perfect for medium duty work on a daily basis. Drop-forged steel handles are tough and provide maximum leverage for tough jobs. Each jaw is progressively heat-treated to create a penetrating cutting edge and resilient body. Jaws are drop-forged from specially-formulated steel and machined to precise specifications. Compound action supplies 80-pounds of force for every 1-pound of force applied to the grips. Safety stops prevent trapped fingers.

Set Contains:

1 x The pack contains 1 Cutters: Rebar Cutters & Benders with specifications: 18-Inch, 460-Millimetre, Centre Cut

• Drop-forged steel handles are tough and provide maximum leverage for tough jobs.
• Each jaw is progressively heat-treated to create a penetrating cutting edge and resilient body.
• Jaws are drop-forged from specially-formulated steel and machined to precise specifications.
• Compound action supplies 80-pounds of force for every 1-pound of force applied to the grips.
• Safety stops prevent trapped fingers.

Product description

The acclaimed singer songwriter's fifth studio album produced and performed by Fiona alongside Amy Aileen Wood, Sebastian Steinberg, and David Garza. Rooted in experimentation, the highly percussive album resists genre categorization. The 2-LP includes a 5 x8 20 page booklet.

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	Would this cut 9 wire
Answer:	This faucet is made of metal.
Question:	How well, if at all do these cut 1/4 inch steel screws/bolts
Answer:	maybe some plastic on the inside but all metal as far as I can tell....I used all Delta when I built my house 25 years ago and this unit is light years ahead of what was available then....
Question:	product description says "Cuts material like bolts, nails, rivets, etc Up to 52 mm dia". Really..52mm is just over 2 inches
Answer:	I did. Since I don't have a cigarette lighter in my car, I figured that the technician would have to install one as part of the "expert installation." They balked. The case is headed for the Supreme Court. I'll be focusing on Kavanaugh, and I might just try opening with a question asking him about which is is favorite beer.
Question:	Will this easily cut 4 gauge galvanized cattle panels
Answer:	No, the clip on the black bake like plastic is where it stops. It is designed for a cup or little bigger. It heats very quickly, and we have used this item on a bigger cup with no problem getting the whole liquid hot. I would like to add that it is best on clear fluids like coffee, tea and broth. Cream soups and other things are a little bit harder to heat, and clean the thing up after use. I use a soft brush to get it clean under warm/hot soapy water. Hope this helped. We use these a lot!

Product features

Knipex 71 22 200 T BKA 8" Angled High Leverage Cobolt Cutters

The U.S. Bureau of Labor Statistics reports that being struck by a falling object is the third major cause of workplace fatalities and that many of these accidents are completely preventable. A one-pound tool falling from 500 feet strikes the ground traveling at about 140 mph. According to OSHA standards, workers are currently required to be anchored when they are four feet or higher above the ground.

Knipex Tethered Tools provide effective protection against accidents caused by falling tools. These tools can be secured to be prevented from falling down during use with cherry pickers, scaffolding, ladders, and also by industrial climbers with wire ropes and high altitude rescue workers. The tether attachment mount point is welded securely to the multi-component comfort grip handle and the flat mounting point does not get in the way during normal work on the ground.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long-lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8% carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Product description

Made In Wuppertal-Cronenberg, Germany. In Addition To Quality, Innovation And Performance, Other Important Cornerstones Are Sustainable Actions And Value-Guided Orientation.

• Precision Grade Performance Tools
• The Number 1 Choice Of Tradesman Worldwide
• Comfortable In Use And Quality Assured Design
• Fit To Match The Needs In The Shop, At Home Or In The Service Field
• Each Tool Is Proven And Tested For Durability And Function In Real World Use And Conditions

User questions & answers

Question:	How does warranty work with knipex
Answer:	yes, as per picture, easy to install. I prefer separate handles and spout but the other model would not fit into the 4".
Question:	Can this cut open a padlock
Answer:	I'm not sure what you mean by spout reach but from the middle of the faucet base to the spout where the water comes out is about 5 1/2 inches.
Question:	Are the blades/jaws adjustable? I don't see an adjustment bolt. This would be for adjusting the jaws closer together as the blades are sharpened. Thx
Answer:	Yes. It has a metal, good quality drain
Question:	Would these cut 3/4 & 1/2 inch rebar
Answer:	Absolutely not. I am so unhappy with this faucet, I bought it in stainless steel and it constantly looks dirty. If you just touch it, it shows fingerprints and water spots galore. I wipe it with a regular multi purpose cleaner and that leaves blotches and streaks on it too. I don't know how no one has mentioned this in any review yet.
Question:	The dimensions say this is 5.3 inches long. Is this correct
Answer:	Hello! Thank you for your question. The Delta 583LF-SSWF Faucet is in the Brilliance Stainless Steel finish. Brilliance® finishes are designed to not corrode, tarnish or discolor for a “like-new” look for life, are developed by embedding molecules deep into the faucet’s surface, creating a bond that is virtually indestructible with an incredibly reflective shine. This process is known as Physical Vapor Deposition (PVD). Delta Faucet Company was the first manufacturer to offer this patented process. Brilliance resists abrasions and discoloration better than traditional special finishes and, in many cases, better than chrome. In independent tests using the harshest drain cleaners, the Delta Brilliance drain retained its appearance, while its competitors did not come close. Tested with over 100 household cleaners, the abrasion resistance of the Brilliance finish can even withstand repeated scouring with steel wool. A Brilliance finish is guaranteed not to corrode, tarnish or discolor for as long as you own your home. It can even withstand prolonged exposure to harsh coastal environments. Best Regards, Rosanna
Question:	What is the thickest bolt that these cutters can cut
Answer:	? ... did not instal with the pin and plugged the drain with a drain plug

Product features

Knipex 71 72 610, 24-Inch Large Bolt Cutter

Knipex’s Large Bolt Cutters provide high cutting performance with minimal effort due to the coordination of the cutting edge angle, transmission ratio and ergonomic handle shape. They also offer a cutting capacity of up to 48 HRC. With a forged-on stopper with a comfortable shock absorber and Comfort Grip handles, each Knipex Large Bolt Cutter is powerful...and ergonomic.

Knipex Large Bolt Cutters feature precise 12 position adjustment (by cam bolt) and high cutting performance. The bolt cutter head is replaceable and the blade is forged from chrome vanadium, heavy-duty steel. The joints is forged from special tool steel and the handle is crafting from steel tube and power-coated.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8 percent carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Knipex 71 12 200 SBA, 8-inch Cobalt Compact Bolt Cutter

An all-around tool for the toughest demands, this Knipex high-leverage CoBolt cutter features a lever action design that applies 20 times more hand force for superior cutting power with less effort. This mini bolt cutter can cut through more than you ever thought possible — up to 1/4-inch diameter with ease. It's ideal for automotive or construction applications, cutting cotter pins and nails, repeated use in factory assembly lines, cutting wire fencing in agricultural settings, or even everyday tasks such as cutting floral wire or fish hooks.

Forged from chrome vanadium electric steel, it's built to last. This lightweight cutter features precision-matched cutting edges for cutting soft or hard steel. The cutting edge recess near the joint keeps thicker wires in a better cutting position (optimum lever ratio), so there is no need to re-position the tool to achieve the desired cut. It's completed with multi-component comfort handle grips for a wider grip. It also features gripping jaws below the joint for gripping and pulling nails and wires.

Quality in Every Detail

Sometimes we give our pliers a really hard time. We try to destroy them to find out what makes them good and long lasting. Because we don't want to leave anything to chance, we take a long, careful look.

The steel Knipex uses is precisely hardened with a maximum of 0.8 percent carbon and defined parts of chromium and vanadium, guaranteeing optimum cutting performance and service life — even though it requires special production and costs a bit more. But our high product demands require this.

The rivet of our high-leverage diagonal cutter also has to stand up to a lot of stress. That's why we literally give it backup: we forge it straight onto the pliers. This means extra effort as we have to precision mill the rivet to a few hundredth millimeters. But satisfied users are worth this effort.

Knipex also looks closely at the small details. The angles, the sharpness, the hardness, the toughness of the cutting edges. The precision and smooth movement of the joint. The handle design and the finish. We keep reviewing these subjects, we research, we test, and we improve our pliers.

Exceptional Cutting Performance With Minimal Effort

Easy Cutting Of Any Wire Up To 1/4-inch

Precision, Induction Hardened Cutting Edges

Gripping Jaws For Gripping And Pulling Nails And Wires