13 best k body clamps

Product description

PAIR of KRE3524 parallel bar clamps!

BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required!

To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece!

KRE3524 specs: 24" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 28-3/4" spreading capacity.

• Two 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!
• Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
• Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
• Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
• Easily converts to spreader without tools!

User questions & answers

Product description

The new K Body REVO clamp range from BESSEY offers some 30-Percent more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force - some 2,000 N more than usual. In addition, the jaw face has been increased by 30-Percent. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90-Degree range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30-Degree. 24-Inch K Body REVO, 1,500-Pound clamping force, 3-3/4-Inch Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps
• 3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces-rail protector pads snap off when not needed
• 1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle
• Rapid action jaw opening and closing-simply raise handle away from steel rail and slide moveable jaw to desired point
• Cold drawn steel alloy rail with six serrated edges for secure, slip proof clamping; K Body REVO clamps sit flush on work surface for easy set ups

User questions & answers

Product description

PAIR of KRE3512 parallel bar clamps!

BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project. The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required! To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece! KRE3512 specs: 12" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 15-5/16" spreading capacity.

• Two 12" KRE3512 clamps: 12" of clamping capacity, a 3-3/4" throat depth, a 10" to 15-5/16" spreading capacity, and up to 1700 lbs. of clamping force!
• Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
• Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
• Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
• Easily converts to spreader without tools!

Product description

18-Inch BesseyREVO Jr. Parallel clamp are designed so that jaw faces are always parallel which results in clamping pressure that is distributed of the face of both jaws equally and consistently. Bessey REVO Jr. Parallel clamps deliver up to 900 lbs of clamping force and have been designed to fill a gap that exists in the market, a general purpose parallel clamp with the right combination of clamping force, weight and features that serious woodworking shops demand. Bessey REVO Jr. clamps are manufactured in Germany and assembled in the USA. Also available in 12-Inch, 24-Inch 36-Inch and 50-Inch capacities.

• This parallel clamp has 900 lbs
• Of clamping force to provide the strength you need and can rely on
• Large surface jaws are accurate at 90 degree angles and have removable pressure caps so you can keep them clean and in perfect working order
• 18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp
• Removeable end stop allows reversing the operating head to convert from compression force to spreading force
• Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn
• Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact
• High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight

User questions & answers

Product description

This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large steel reinforced jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reserved on the bar and the clamp then acts as a spreader.

• Tips: The jaws are not parallel when opened, they are preset by an inclination of +/-0.5°, when you tight up and clamp the items, the clamps will be parallel.
• Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using this clamp.
• Deep 3-3/4 inch jaw depth for optimized pressure distribution. Secure locking system prevents jaws from slipping. Features ergonomic designed 2 component molded soft grip handle.
• Rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading.
• This Jorgensen bar clamp set is ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure.

User questions & answers

Product description

Bessel K-Body REVO parallel bar clamp set; 2 pieces of 24" & 50" Capacity clamps & 2 Bessel K-Body clamp extenders

• Bessel K-Body REVO set
• Perfect parallel clamping force with all of the K-Body REVO features
• 2 pieces of KRE3550 & KR3524 included
• Pair of KBX20 extender included
• Cold drawn profile steel rail is made in Germany, assembled in USA

User questions & answers

Product description

K Body Extender, -, Dimensions (In.) 8 x 2 x 1 3/4, For Use With Nos. 5HXP2 thru 5HXP6 Parallel Clamps

User questions & answers

Product description

K Body Extender, Dimensions 8 x 2 x 1 3/4 In, For Use With Nos. G2731565 thru G0877353 Parallel Clamps

From the Manufacturer

Aluminum extrusion designed to join 2 Bessey K-Body clamps together to create an operating K-Body with added capacity.

• Mpn: KBX20
• Country of manufacture: China
• Manufacturer: Bessey

User questions & answers

Product description

6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 1 four piece KP Framing Block set.

• 6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 1 four piece KP Framing Block set
• KP Block set consists of; 4 molded fixtures designed for perfect clamping set ups of raised panel doors, frames or any square part glue up
• Perfect 90 degree alignment of clamped components is easy with Bessel KP blocks
• KP blocks include molded mounting holes for easy attachment to a work surface when it is desired
• Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (not included)

Product description

Pivot Jaws, Dimensions 7 x 1 x 1 1/2 In, Surface Tip 7 x 1 In, For Use With Nos. G2731565 thru G0877353 Parallel Clamps, Package Quantity 2

From the Manufacturer

Pivoting jaw self aligns on tapered & irregular shaped materials, molded polyamide

• Mpn: KR-AS
• Country of manufacture: China
• Manufacturer: Bessey
• Pivoting jaws are packed in sets of 2
• KR-AS slides on and off of fixed and moveable jaws
• Perfect for holding materials that are irrregularly shaped
• Pivoitng jaws easily slide onto channels in fixed and stationary jaws, after removing standard jaw pads
• Pivoting jaws can used above and below rail and can be stacked for special applicatons

User questions & answers

Product description

The new KR3.540 40-inch K Body REVO Fixed Jaw Parallel Clamp 2-Pack from BESSEY offers some 30% more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force – some 2,000 N more than usual. In addition, the jaw face has been increased by 30%. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90° range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30°. 40" K Body REVO, 1,500 lb clamping force, 3 3/4" Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect Parallel jaw design for, 90-degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials--can be attahced to work surfaces using TK-6 clamps
• 3-3/4-inch throat depth with 3 removeable jaws pads designed to protect material surfaces; 2 rail protector pads designed to keep clamped material from contacting rail surfaces; rail protector pads snap off when not needed
• 1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle
• Rapid action jaw opeing and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movabel jaw for spreading
• Cold drawn steel alloy rail with 6 serrated edges for secure,slip proof clamping, K Body REVO clamps sit flusch on work surface for easy set ups

User questions & answers

Product description

For high pressure clamping, 90 degree clamping, or powerful spreading, the new K Body REVO is an ideal choice. Its large, parallel jaws are uniquely designed to distribute even pressure across the entire surface of your work to stop bowing, turning, and lifting.





The K Body's updated design includes three removable jaw protection caps to help prevent wear. They are glue-repellent, easily replaceable, and resist paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpiece. Compatible with K-P clamp blocks and the K-Body Clamp Extender.

• 50" fixed jaw parallel clamp
• Large, flat parallel clamping surface
• Internal frame ensures 90-degree angles even at maximum pressures
• Replaceable protection caps for delicate surfaces
• Easily converts to spreader without tools

User questions & answers

Product description

36" Capacity x 3 1/4" Throat depth parallel bar clamp

• 36" Capacity x 3 1/4" Throat depth
• Parallel clamping jaw faces
• 900 lb. clamping force
• Strong clamping or spreading force
• Cold drawn profile steel rail is made in Germany, assembled in USA