13 best bessey k body clamps

Product description

The new K Body REVO clamp range from BESSEY offers some 30-Percent more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force - some 2,000 N more than usual. In addition, the jaw face has been increased by 30-Percent. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90-Degree range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30-Degree. 24-Inch K Body REVO, 1,500-Pound clamping force, 3-3/4-Inch Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps
• 3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces-rail protector pads snap off when not needed
• 1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle
• Rapid action jaw opening and closing-simply raise handle away from steel rail and slide moveable jaw to desired point
• Cold drawn steel alloy rail with six serrated edges for secure, slip proof clamping; K Body REVO clamps sit flush on work surface for easy set ups

User questions & answers

Product description

6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 1 four piece KP Framing Block set.

• 6 piece set includes; 2 KRE3524 24" clamps, 2 KRE3550 50" and 1 four piece KP Framing Block set
• KP Block set consists of; 4 molded fixtures designed for perfect clamping set ups of raised panel doors, frames or any square part glue up
• Perfect 90 degree alignment of clamped components is easy with Bessel KP blocks
• KP blocks include molded mounting holes for easy attachment to a work surface when it is desired
• Ergonomic two component handle with steel socket for applying force with a 6mm hex key or driver when desired (not included)

Product description

18-Inch BesseyREVO Jr. Parallel clamp are designed so that jaw faces are always parallel which results in clamping pressure that is distributed of the face of both jaws equally and consistently. Bessey REVO Jr. Parallel clamps deliver up to 900 lbs of clamping force and have been designed to fill a gap that exists in the market, a general purpose parallel clamp with the right combination of clamping force, weight and features that serious woodworking shops demand. Bessey REVO Jr. clamps are manufactured in Germany and assembled in the USA. Also available in 12-Inch, 24-Inch 36-Inch and 50-Inch capacities.

• This parallel clamp has 900 lbs
• Of clamping force to provide the strength you need and can rely on
• Large surface jaws are accurate at 90 degree angles and have removable pressure caps so you can keep them clean and in perfect working order
• 18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp
• Removeable end stop allows reversing the operating head to convert from compression force to spreading force
• Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn
• Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact
• High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight

User questions & answers

Product description

Bessel K-Body REVO parallel bar clamp set; 2 pieces of 24" & 50" Capacity clamps & 2 Bessel K-Body clamp extenders

• Bessel K-Body REVO set
• Perfect parallel clamping force with all of the K-Body REVO features
• 2 pieces of KRE3550 & KR3524 included
• Pair of KBX20 extender included
• Cold drawn profile steel rail is made in Germany, assembled in USA

User questions & answers

Product description

The new KR3.540 40-inch K Body REVO Fixed Jaw Parallel Clamp 2-Pack from BESSEY offers some 30% more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force – some 2,000 N more than usual. In addition, the jaw face has been increased by 30%. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90° range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30°. 40" K Body REVO, 1,500 lb clamping force, 3 3/4" Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect Parallel jaw design for, 90-degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials--can be attahced to work surfaces using TK-6 clamps
• 3-3/4-inch throat depth with 3 removeable jaws pads designed to protect material surfaces; 2 rail protector pads designed to keep clamped material from contacting rail surfaces; rail protector pads snap off when not needed
• 1,500-pound clamping force, with ergonomic designed 2 component molded soft grip handle
• Rapid action jaw opeing and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movabel jaw for spreading
• Cold drawn steel alloy rail with 6 serrated edges for secure,slip proof clamping, K Body REVO clamps sit flusch on work surface for easy set ups

User questions & answers

Product description

PAIR of KRE3524 parallel bar clamps!

BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required!

To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece!

KRE3524 specs: 24" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 28-3/4" spreading capacity.

• Two 24" KRE3524 clamps: 24" of clamping capacity, a 3-3/4" throat depth, a 10" to 28-3/4" spreading capacity, and up to 1700 lbs. of clamping force!
• Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
• Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
• Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
• Easily converts to spreader without tools!

User questions & answers

Product description

The new K Body REVO clamp range from BESSEY offers some 30-Percent more clamping force, and newly-designed pressure caps and work-piece contact elements also protect the work-piece exceptionally well. The Vario K Body REVO clamp enables the head to be adjusted at the press of a button. The new K Body REVO clamp from BESSEY achieves a powerful 7,000 N clamping force - some 2,000 N more than usual. In addition, the jaw face has been increased by 30-Percent. Three removable and glue-repellent pressure caps guarantee work piece protection. Adjustable work piece contact elements prevent direct contact between the work piece and the serrated steel rail under full utilization of the jaw face. The tilting K Body clamp adapter (available separately) KR-AS which is easily pushed on to the clamping jaws enables clamping requirements outside of the 90-Degree range to be fulfilled. The tilting adapter adjusts to the work piece, regardless of whether fitted in a v-shape or at a slanted parallel. The additional module is infinitely tilt-able within a range of 30-Degree. 50-Inch K Body REVO, 1,500 lb clamping force, 3-3/4-Inch Throat depth, 3 removable jaw pads, 2 component ergonomic handle, removable material protector pads, removable end stop, can be attached to a work bench using Bessey TK-6 clamps

• Perfect Parallel jaw design for, 90-Degree clamping of materials, glue-ups of materials, general purpose clamping of wood, composites, plastics, light metals, and mixed materials, can be attached to work surfaces using TK-6 clamps
• 3-3/4-Inch throat depth, with 3 removable jaws pads designed to protect material surfaces, two rail protector pads designed to keep clamped material from contacting rail surfaces. Rail protector pads snap off when not needed.
• 1,500 lb clamping force, with ergonomic designed 2 component molded soft grip handle
• rapid action jaw opening and closing, simple raise handle away from steel rail and slide moveable jaw to desired point, reverse movable jaw for spreading
• cold drawn steel alloy rail with six serrated edges for secure, slip pro0f clamping, K Body REVO clamps sit flush on work surface for easy set ups

User questions & answers

Product description

SET OF TWO. Each one is aluminum extrusion designed to join 2 Bessey K-Body clamps together to create an operating K-Body with added capacity.

• Precision aluminum extrusion
• Steel bolts nuts and washers included to join K-Body Extender to 2 K-Body clamps
• Ideal for projects that require K-Body clamps that have larger opening capacity
• Durable aluminum construction ensures a rigid link with no twisting or unwanted movement
• SET OF TWO. Each piece comes with 2 bolts, 2 nuts, and 4 washers

Product description

Bora knows how important it is to rigidly clamp down your case goods and other woodworking projects. Rock-solid stability means more precise work. Our parallel jaw clamp is the woodworking clamp that both enthusiasts and professionals reach for. With the perfect amount of pressure 1, 100 lbs (500 kg), A 3 ½” (89 mm) throat with a padded jaw, and sizes that range from 12” to 50”, it becomes an extremely versatile tool for your clamping needs. Add in the little extras that make all Bora products stand out – in this case, a passive Lock bottom jaw, and large, easy-grip handle. Get one (or several) for your shop today.

• Strong and steady – the 3. 5-Inch wide padded jaw provides constant, even pressure without damaging material and the jaw stays in place when winding the Clamp
• Perfect pressure - not too loose, not too tight, just right with 1, 100lbs (500kg) of clamping pressure
• Multiple sizes - The Bora parallel jaw Clamp is right for any project, available in lengths: 12”, 24”, 31”, 40” and 50”
• Trusted Bora Quality - Bora knows how important rock-solid clamping is to woodworkers and designed this product based on end-user Feedback
• Includes set of two 50-inch parallel Clamps
• Usable space: 51-1/4 in.

User questions & answers

Product features

50-Inch Parallel Clamp, Two-Pack

The Bora Tool 50-Inch Parallel Clamp delivers exceptional clamping pressure and performance with an easy-to-use design. The 3.5-inch padded jaws slide up and down with a simple lift of the handle, and they automatically become parallel as you tighten them on your project. Precision clamping has never been so easy.

Easy-Grip Handle

The large, easy-grip handle makes it easy to lift and release the jaw to slide along the bar. This enables you to work quickly so you can clamp your material and get right to work.

Anti-Slip Bottom Jaw

The mindfully engineered passive lock jaw stays in place while winding, ensuring the jaw will not move unless manually adjusted.

Material Is Safe From Damage

Our clamps have a 3.5-inch deep throat with a padded jaw that provides constant, even pressure without damaging your material.

Padded Jaws Provide Perfect Clamping Pressure

Not too loose, not too tight…our clamps provide the perfect amount of clamping pressure. At 1,100lbs. (500kg) you can count on the pressure being consistently even when using these clamps. This translates to carcass work that stays in shape, delivering the result you expect.

Clamps You Can Trust

With consistent clamping pressure and an exceptional hold, there’s no replacement for Bora's parallel clamp. Designed to rigidly clamp your case goods and other woodworking projects, their rock-solid stability will deliver a superior finished product that you can be proud of - every time.

Product description

PAIR of KRE3531 parallel bar clamps!

BESSEY's K Body REVOlution parallel bar clamp has been redesigned to provide you with easier and more powerful clamping force than their previous model -- up to 1700 lbs! The new and improved operating jaw stays where you put it for easier set up; simply position the jaw where you want it and apply desired clamping force. Another new feature of this clamp is a steel socket running through the ergonomic handle that is designed to receive a hex key or driver on its end to provide more clamping force if desired (max torque 17Nm). Additionally, the jaws, which are designed to clamp at a 90-degree angle to the rail, provide a larger clamping surfaces than in the previous model and come with three removable pressure caps that are glue-, paint-, and solvent-resistant. Two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

The K Body REVOlution is easy to operate! To close and clamp your work-piece, tilt the handle down toward the rail, slide the jaw toward your work-piece, and tighten. Once positioned, the operating jaw will stay in place and provide you the clamping power you need, right where you need it. To remove the clamp, release the clamping pressure, and then simply pivot the handle up and away from the rail to slide the jaw away. Need a spreader? Simply remove the rail end clip, slide off the operating jaw and slide it back into the bar in the reverse position to give spreading support to your project, no tools required!

To maximize the potential of this clamp, consider purchasing the optional pivoting jaws (KR-AS) for your tapered work-piece clamping needs, and/or Bessey's framing blocks (KP Blocks) that, with four clamps, allow you to apply even clamping force at all four corners of your work-piece!

KRE3531 specs: 31" clamping capacity; 3-3/4" throat depth; 1700 lbs. of clamping force; 10" to 36-1/2" spreading capacity.

• Two 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!
• Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.
• Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.
• Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.
• Easily converts to spreader without tools!

Product description

For high pressure clamping, 90 degree clamping, or powerful spreading, the new K Body REVO is an ideal choice. Its large, parallel jaws are uniquely designed to distribute even pressure across the entire surface of your work to stop bowing, turning, and lifting.





The K Body's updated design includes three removable jaw protection caps to help prevent wear. They are glue-repellent, easily replaceable, and resist paint and grease solvents. A quick-release feature allows the movable jaw to slide up and down the rail by simply angling the comfortable Power-Grip handle. Plus, each clamp includes two slip-on workpiece supports that attach to the rail, providing a stable base and preventing direct contact between the clamp and the actual workpiece. Compatible with K-P clamp blocks and the K-Body Clamp Extender.

• 50" fixed jaw parallel clamp
• Large, flat parallel clamping surface
• Internal frame ensures 90-degree angles even at maximum pressures
• Replaceable protection caps for delicate surfaces
• Easily converts to spreader without tools

User questions & answers

Product description

The JORGENSEN Cabinet Master Bar Clamps are ideal for flat panel, box, cabinet, frame and panel doors assemblies or any other project that requires squareness or evenly applied pressure. Large plastic jaws assure the distribution of clamping pressure over large areas. The jaws stay parallel to assure squareness and prevent work pieces from bowing or lifting. Built in clamp stand allows clamps to stand upright for one handed use and easier/quicker sliding head adjustment. The sliding head can be reversed on the bar and the clamp then acts as a spreader. Opening capacity is 36 inches, clamping faces are 3-3/4" height and 1-7/8" width, high-carbon steel bar is 1-3/16" X 3/8", screw is 5/8” cold-drawn steel with special, smoothly cut ACME threads, large easy to grip handle and load limit is 1,000 lbs. The Chicago based Pony Tools Inc. which was established in 1903 is the manufacturer of all JORGENSEN Bar Clamps. The JORGENSEN Cabinet Master Bar Clamps are made with U.S. and foreign parts in our Chicago factory.

• These 90-degree parallel steel bar clamps have more benefits and enhanced features than any clamp on the market today
• This product is easy to use easy to install and highly durable
• Multiple clutch disks are made from hardened and plated round edge high carbon steel to give greater support along the 1-3/16" x 3/8" steel bar
• Maximum opening capacity is 36 inches
• Clamping faces are 3-3/4 inch height and 1-7/8 inch width
• Maximum opening capacity is 36 inches
• Clamping faces are 3-3/4 inch height and 1-7/8 inch width

User questions & answers

Product description

This 24" fixed jaw parallel clamp features a large, flat parallel clamping surface made of impact and break resistant polyamide that comes with three replaceable pressure caps that are glue, paint and grease resistant. The internal frame ensures accurate 90-degree angles which are very sturdy even at maximum pressures. A large, comfortable two-component composite handle with a soft plastic insert makes a comfortable grip. Rail protection pieces made of same glue resistant polyamide elevate the workpiece from the rail, and the removable end rail clip ensures that the clamp sits parallel to the rail and can easily be removed to reverse sliding arm for use as a spreader.

• 24" fixed jaw parallel clamp
• Large, flat parallel clamping surface
• Internal frame ensures 90-degree angles even at maximum pressures
• Replaceable protection caps for delicate surfaces
• Easily converts to spreader without tools