14 best infrared paint strippers

• ▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in seconds. Two modes: I: 50-450℃, 190-210L/min; II: 50-650℃, 250-500L/min
• ▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 120℉ to 1200℉; Our heat gun also possess overload protector to avoid damaging your heat gun and circuit
• ▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders; Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose
• ▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface
• ▶ 【100% Satisfaction Guarantee】 Full refund or return guarantee with lifetime free warranty. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.

User questions & answers

Question:	Can this operate in usa 110/120 vac 60hz
Answer:	Yes it will , you just need to set it up the amperage needed for Aluminum applications.
Question:	Does it vent on the sides so it doesn't interfere with cooling when it is sitting flat (hands free). Also, did it get UL approval
Answer:	yes it is ?
Question:	Could I use this to weld seams on a plastic shower curtain
Answer:	Yes, it use argon gas when do TIG welding
Question:	Will this gun stand on it's own so it can be used hands free
Answer:	the weight of machine is 7.5lb

Product features

Specification

Strong power: 1800W

Input: 110V, 50Hz

Size: 248mm*192mm (9.76"*7.56")

Dual temperature setting :

Mini: 50℃(122℉)

Max: 650℃(1202℉)

Dual airflow setting:

Low: 190L-210L/min; High: 250L-500L/mini

Cable Length: 1.6m (5.25ft)

Weight: 0.9kg (1.984lb)

Suitable Temperature Recommendations

Low

120-300℉ thaw frozen pipes

400-440℉ bend the plastics, or soften dry paint

440-550℉ soften the adhesive material

790-830℉ soften welding material

900-950℉ loosen rusted material



High

960-1000℉ remove paint

1000-1200℉ qualitative change

Car Wrapping

It's an practical garage tool that every mechanic should have in their tool box. It will give you the edge for carrying out tasks such as tinting car windows or wrapping your cars interior.

Removing rusted bolts

Heat the nut with a heat gun if it won't come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.

Shrinking PVC

Our heat guns are simple to use and have the power to efficiently shrink wrap products at the speed you need. With excellent air velocity settings, it quickly shrinks PVC and/or Polyolefin shrink film in just a few seconds

Bending pipes

Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.

Product description

The LF724 is a paint remover that strips paint, varnish and other coatings on flat wood surfaces up to 70-Percent faster than other methods. The LF724 paint remover, which is also suitable for use on untreated wood, provides a more environmentally sound solution for coating removal than other methods such as heat gun with putty knife and chemical stripping. The LfF724 paint remover features Metabos exclusive S-automatic clutch, which increases the life of the tool by reducing damage to the gear train when the planer hits a nail on siding or wood. The efficient design incorporates the same winding protection grid featured on other Metabo tools, reducing the overall cost to the customer. The tool has four reversible solid tungsten carbide blades for long service life, while a low vibration level reduces user fatigue. It creates minimal dust during use and is highly suitable for handling rabbets. Blade cutting diameter is 3-1/7-Inch and the maximum rabbeting height is 1-1/0-Inch. Cutting depths are 0.012-Inch , axil and .006-Inch , radial. No-load speed for the Lf724 is 11,000 rpm, torque is 18-Inch-Pound, and total tool weight is 6.25-Pound The remover comes standard with the four carbon blades, a vacuum adapter, a combination wrench, and a carrying case.

• For the removal of paint and varnish from even wooden surfaces, such as stairs, doors and windows
• Up to 70 -Percent time saving compared to conventional working methods
• 4 reversible carbide blades with high tool life
• Cutting edge cycle 3-1/8-Inch- Maximum notch depth unlimited - Lateral milling height 1-1/8-Inch - Axial molding/routing depth 0-Inch
• For working on a roof truss for edges and corners difficult to reach.Output power:430 W

User questions & answers

Question:	The Blades have markings on them, 1, 2, 3, 4. Are those for depth cutting? What would be the smallest
Answer:	This spray gun is sourced from an ISO certified manufacturer in China. AEROPRO USA offers a 1 year manufacturer limited warranty.
Question:	Does this come with an adapter for connecting to a vacuum hose and if so, what size
Answer:	Yes, will fit all standard sprayer lines.
Question:	Can this be used to remove lead paint
Answer:	It will attach to any standard 1/4" airless pressure line. I'm pretty sure Campbell Hausfield uses this type of pressure line.
Question:	I have a chalet with t&g, is there any feathering left to the fasad after use? I wish to remove paint, and bring back to naurual wood finish
Answer:	Yes

Product description

The Porter-Cable PC1500HG Heat Gun has a dual fan speed selector that delivers high and low fan speed settings. The variable temperature control dial allows for easy adjustment of temperatures. It has an integrated hands free support stand that allows the gun to sit upright for hands free use. The integrated hanging hook is ideal for storage. The lightweight, only 2-pound, gun offers less fatigue when holding. It has a 1500-Watt motor that delivers high heat and multiple fan settings. Its 6-Feet high grade cord improves flexibility during cold use. Perfect for applications such as: Paint removal, Bending plastic pipes, welding plastics, Removing adhesive tiles, Shrinking plastic tubing.

• 1500 Watt motor
• Dual fan speed selector
• Variable temperature control dial
• Integrated hands free support stand
• 6 Feet high grade cord

User questions & answers

Question:	What type of warranty does this have
Answer:	I do not think they are for cutting depth, the adjudgment screw in the middle of the cutting head is how you adjust the dept.
Question:	is it normal for it to smoke even after a few uses
Answer:	Mine came with a snap-in adapter that fits a 1-1/4 inch vacuum hose. I use a piece of duct tape to secure it.
Question:	what temperatures does this use
Answer:	Search for EPA rules to gain an understanding of all the aspects of lead paint removal. Must use HEPA Vac, N-100 or P-100 respirator, seal and dispose of waste properly. It's doable, but must be done right.
Question:	Compared to a typical hair dryer, is it as noisy
Answer:	I used this tool to remove the paint off a staircase within a house that was built in 1892. The steps had many layers of paint, which I brought back down to the original yellow pine wood, it worked extremely well. I quickly went through 32 steps in a couple of days, which included removing nails hidden beneath the layers of paint and sanding with a finish sander. Just make sure you get additional blades that are affordably priced so that you continually have sharp blades doing the work.

Product description

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

From the Manufacturer

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

• Biodegradable formula
• Safe for user, substrate and environment
• Removes multiple layers
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic

User questions & answers

Question:	has anyone use this in a sprayer
Answer:	It can be sprayed. Best to use a commercial sprayer. You will need to remove all the filters and use a .031 tip size.
Question:	how does it do on wood
Answer:	It does very well on wood. Unlike some other environmental strippers like Peel Away 7 it isn't highly alkaline and doesn't require being neutralized, and thus there is no danger of darkening the wood. The #1 choice for wood in my opinion, and I have tried virtually everything. (One tip--cover the stripper with wax paper, plastic, etc. while you let it work so it doesn't dry out. Let it work overnight for maximum effectiveness.)
Question:	How many gallons would be needed for a 26 ft boat with a 10 ft beam
Answer:	I think you would need to ask to buy it by the barrel! We stripped both sides of a standard door and used over a gallon. There were many layers of paint, but you also have to put it on thickly for it to work properly. I would contact the manufacturer for suggestions on stripping a boat.
Question:	does it work on brick which has latex paint on it
Answer:	Yes it works great on stripping latex paint from brick interior or exterior.

Product description

Bahco 665 Premium Ergonomic Carbide Scraper, 2-1/2

The Bahco premium ergonomic carbide scraper is intended for heavy-duty applications and is ideal for wide material removal when extra strength is required. The long-lasting carbide blade allows you to scrape wood, metal and concrete, quickly and efficiently removing paint, glue, varnish, rust, and more. The 2-component handle gives you better grip and added comfort; the slim-lined front end gives you increased scraping access when working in confined spaces. This scraper also features a large plastic knob for more comfortable two-handed operation, making it a great tool for heavy duty use when scraping large areas. This scraper comes with a 2-1/2-inch replaceable blade and also readily accepts 2-inch blades. The tool measures 12-1/10-by-4-2/5-by-3-1/2 inches (LxHxW) wide. This scraper comes with a holster for convenient pocket or belt storage and is backed by a lifetime limited warranty.

From the Manufacturer

The BAHCO 665 ergo carbide blade paint scraper features a two component handle that provides better grip and comfort during use. The scrapers are for use on all kinds of surfaces for removal of paint, glue, varnish, rust gaskets, chalk, grout and mortar. The heavy duty scraper head is designed for wide material removal when extra strength is required. This model scraper comes with a big plastic knob for two-handed operation for heavy-duty use. It is 12 inches in length and the blades stay sharp up to 50 times longer than conventional steel blades.

• Maximum comfort with minimum effort due to the ergonomic design
• Comfortable 2 component handle giving an excellent grip
• Carbide blades for easy removal paint, glue, varnish and rust off various surfaces
• Comes with large plastic knob for two-handed operation for heavy duty use.
• Supplied with a 451, 65 mm double edged straight blade
• Other suitable blade 442

User questions & answers

Question:	How many are available to purchase
Answer:	The warranty is 1 year, but Porter-Cable published an update to their warranty, stating many of their products will be under warranty up to 3 years and free service for worn parts for up to one year. But I'm not sure if this extended warranty applies to the heat gun. Sorry I can't offer more detail.
Question:	where can i get replacement blades for the 665 scraper
Answer:	My second one smoked a lot the first time, and it ended up going out after 2.5 months. My first one lasted 37 months, and I do not recall that it smoked much the first time.
Question:	Where is this scraper manufactured
Answer:	Has 2 Temperature settings not known. I use it to quickly thaw out frozen water pipes and to thaw out cables on my tractor. Works great...
Question:	Does it includes one or four blades? The description says "Four interchangeable carbide blades". Are the additional blades included
Answer:	Much less noisy, but don't even THINK about using it to dry your hair, or any other part of your body...

Product features

Bahco Scrapers

Bahco's scrapers have been designed to be easy to use, but tough enough for any application. The heavy duty scraper head for models 650 and 665 is designed for wide material removed when extra strength is required. Scraper 665 comes with large plastic knob for two-handed operation for heavy duty use.

• [DUAL TEMPERATURE] 2 Temp settings 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] can satisfy all your utility
• [POWERFUL & RELIABLE] Heavy duty heating gun with 12.5 Amp motor heats up to maximum temperature 1112℉(600℃) quickly in few seconds and performs stable. Professional heater gives outstanding performance by keeping running 500 hours in max temperature (data from lab)
• [ERGONOMIC & SAFETY] Ergonomic design for comfort and balance to reduce fatigue, integrated hands free support stand allows the gun sit upright for safe hand-free operation. With professional built-in overload protection prevents hot air gun from over heating due to misuse
• [VERSATILE ACCESSORIES] 4 Nozzle deflectors extend heat gun utility, Reduction nozzle for welding plastics, solering/ de-soldering, shrink wrapping, loosening seized bolts & nuts. Glass protection nozzle for paint removing or adhesive stripping neat heat-sensitive materials. Wide jet surface nozzle for paint or adhesive removal. Reflector nozzle for heat shrinking tubing, shaping PVC tubes, thawing frozen pipes
• [WHAT YOU GET] Enertwist Electric heat gun and 4 nozzle attachment kit, user manual, warranty card. Please feel free to contact us if you have any of the questions.

User questions & answers

Question:	Can this be used to vinyl wrap
Answer:	H we have now 48 pieces in stock. Thanks
Question:	Anyone have experience using this heat gun to dry auto primer and paint?if so, did it work well
Answer:	They are shown right next to the scraper on Amazon. Part #442 or #451 depending on the size you want.
Question:	When I went to the first heat setting white smoke starting pouring out. Is it supposed to do this?? I quickly unplugged it
Answer:	Oops!!! I rechecked on my scraper and found a small-print "Made in Sweden" on the handle that I had missed. The previous reply I sent was information from an internet search. At least, I can assure your questioner that the Bahco 625 I have is from Sweden. and I apologize for the misinformation.
Question:	Difference between 1500D and 1500H
Answer:	The one I ordered included one triangle blade. I think there are four different shaped blades that will fit on that handle. They are expensive blades but they last much longer that the cheaper non-carbide blades-- just don't scrape over a nail with it, carbide is hard (that's why it says sharp), but brittle and will chip.

Product features

Enertwist Dual Temperature Heat Gun Kit with 4 Nozzle Accessories, ET-HG-1500D

• Rated Power: 120V 60Hz 1500W 12.5A
• 4 Heat gun accessories
• 6ft UL plug power cord
• ETL-certified for trusted safety
• Ergonomical weight balance design for a fatigue-free easy-to-use operation
• Featuring a dual temperature setting hot air tool with an integrated thermal cut out for optimizing safety
• I/II/IIIAir flow and temperature settings:

Get Big Performance

• Powerful 1500 Watt heat gun offers strong power to heat up to 1112℉(600℃) quickly in few seconds

Dual Temp Slide Switch

• 2 Temp settings 752℉& 1112℉(400℃ & 600℃)
• 3 Fan Speeds features High/ Mid/Cool/Off control [III:500L/min@600℃,II:250L/min@400℃,I:500L/min@50℃, Off]

Flat Back Stand Design

• Integrated hands free support stand

Additional Accessories Bonus

• A range of 4 different nozzles performs wide applications flexible

Shrinking/Wrapping/Crafting

Removing/Stripping/Bending

Welding/Heating/Loosening/Drying/Thawing/Soldering

Waxing/Clearing/Repairing/Roofing

Product description

The HT1000 Heat Gun is a dual temperature heat gun that can help you quickly complete countless DIY projects using high temperature heat outputs. It uses a 750ᵒF and 1000ᵒF temperature setting to easily loosen rusted bolts, remove flooring, and thaw frozen pipes. It is a heat gun for shrink wrap, heat gun to remove paint, and so much more! The gun uses 1200 watts of power to easily complete countless home improvement projects. Its durable and lightweight design applies effective, concentrated heat for various project needs. The gun also features an integrated stand to provide safe, hands-free operation.Hello, The product details on Amazon.com aren't displaying correctly, which will lead to a bad customer experience. Please update this ASIN immediately with this information.

• DUAL TEMPERATURE HEAT GUNS: The HT1000 Heat Gun offers a 750ᵒF and 1000ᵒF temperature setting to easily help complete household home improvement tasks
• HEAT GUN FOR HOUSEHOLD PROJECTS: Use this heat gun to soften paint, caulking, adhesive or putty for removal. Other applications include shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts
• HEAT GUN ADJUSTABLE SETTINGS: The two fan speeds provide additional control to customize to your project needs
• HANDS FREE OPERATION: Features an integrated stand for safe, hands-free operation to help prevent the hot nozzle from touching your work surface
• DURABLE FOR GENERAL USE: Features a corrosion resistant nozzle for long lasting use and integrated hanging hook to easily store on a peg wall or workbench

User questions & answers

Question:	Is this heat gun the same one as the Hero Arts heat gun? Thanks
Answer:	Yes, you need the Iroda PS-95 replacement tip. I sell this on eBay under the company Eddy Products. Just do a search for MJ-950 replacement tip, PS-95 and it should pop up. thanks Kevin
Question:	Hello guys I need to know if it is working V120 or V
Answer:	Hey Ryan, This unit does not have an internal blower wheel, so there are no real CFM’s for the MJ-950, however at the tip it does get to 1400 degrees F on full throttle. You can do a lot of damage at such high temps. And if that’s not hot enough, I don’t know what would be. Just be really careful if you go that route. Hope this helps! Kevin
Question:	removing old paint
Answer:	Not a good idea for several reasons, I'll only pick one: Car door handles contain plastic, as do the locking mechanisms. You would be better served to use a lock deicer rather than a heat gun. This unit gets hot enough to remove the paint from your car, so you'd surely melt the lock and handle into so much useless gunk.
Question:	I seen this has a 3-prong plug. If I get a 2 prong adapter and reverse polarity, can I use it to cool things down
Answer:	No, the CRAFTSMAN and BLACK+DECKER Brands are not interchangeable.
Question:	replacement tips
Answer:	No it doesn’t
Question:	Does it get hot enough for emblems in cars to help them stick
Answer:	Home Depot
Question:	Could this be used to meal frozen car door handles
Answer:	Save your money. It’s junk!!

Product features

Versatile Wagner Heat Gun for Home Use

The Wagner HT1000 heat gun is an easy-to-use hot air tool that applies focused heat for removing paint, thawing pipes, loosening rusted bolts and more.

Two Temperatures Settings

Find the perfect heat setting for your project needs by switching between the two temperature settings. The heat gun offers a low 750°F and high 1000°F setting.

Perfect Design for Extended Use

With a corrosion resistant nozzle and rugged, lightweight handle, the HT1000 is durable enough to power through tough jobs and big projects. We’re confident in our product’s performance, which is why this durable heat gun is backed by a 2 year warranty.

Remove Rusted Bolts

Apply concentrated heat with the HT1000 to easily remove stuck-on or rusted bolts.

Paint Removal

The HT1000 applies the perfect heat output to soften paint for quick and simple stripping.

Flooring Removal

Heat the glue underneath the floor and watch as boards peel back with ease.

Thaw Frozen Pipes

The two temperatures and fan speeds makes thawing pipes easy and hassle free.

Product description

12

• ★ Long Cable Enough for Crafting : 6.56FT Long Cable !!!!! Hot air shrink gun was made of high quality stainless steel inside and ABS plastic outside,simple design and durable quality, mini dimensions 240*50mm / 9.44*1.97in
• ★ Suitable for:This excellent compact heat gun can be used for heating shrinkable film, embossed powder,rubber stamp.Built-in stand for self-support and table top use
• ★ Voltage&Cooling Holes:Voltage 110V, the temp of the nozzle could reach to 200° in seconds.The heat vents of heat gun tail can decreased the internal high temp and extend the life
• ★ DIY Essentials Part : If you like DIY, this is a good accessory for you. Even ,you can replace toaster or oven and the polymer clay will become hard and bright after using the gun
• ★ Warm Tips:The temp of the nozzle could reach to 200°in seconds,please don't use it more than 10 minutes in one time, just turn off then turn on for working continuously

User questions & answers

Question:	does it get hot enough to deform pvc(so that i would be able to adjust the shape
Answer:	Yes. It can also be used to repair holes, rips or tears in vinyl.
Question:	will this work to Heat Shrink Connectors for Electrical splicing
Answer:	Don’t no
Question:	Does it melt shrink wrap smoothly
Answer:	Same here.. and not sure if has a fan or is it intended to just use convection to direct the heat ? Mine just poured smoke and didnt seem to put out much heat. I'm used to a forced air coming out of a heat gun.
Question:	Will this work on sealing packages in bubble wrap
Answer:	Dear customer 1500D: 752℉& 1112℉(400℃ & 600℃) features High/ Mid/ Cool/ Off control [ III: 500 L/min, II: 250 L/min,I: 500 L/min, Off] 1500H: 662℉& 1112℉(350℃ & 600℃) features High/ Mid/ Off control [ II: 500 L/min,I: 300 L/min, Off] Thanks

Product description

Hyde Tools 10450 Contour Scraper with 6 Changeable Blades

From the Manufacturer

America's favorite brand. Our brand strength has never been stronger in paint and wall-covering hand tools. Hyde is America's favorite brand in these categories, chosen two to one by contractors over any other brand for scraping, patching, taping and coating surfaces. Whether purchased by professionals or homeowners, our tools are considered "serious tools for serious users." our superior product strength and durability are often backed by a lifetime guarantee. Tap into the loyal following Hyde tools has been building for generations.

• The product is Contour Paint Scraper Kit With 6 Blades.
• Elegant and smooth finish
• The product is manufactured in China
• Material:High Carbon Stainless Steel
• Removes paint, varnish, putty caulk or rust from virtually any surface
• Six specialized blades included
• Comfortable contoured handle keeps hand away from surface

User questions & answers

Question:	Looks like the handle of an exacto knife but thicker and a chisle like blade do you sell it
Answer:	Can recommend this tool. Handle is much heftier than Exacto,but that's needed for a good strong grip. Easy to grind blades to the profile you're working on. No, i don't sell it(?).
Question:	s house--i don't want to strip all the woodwork--i would just like to get a cleaner edge to the woodwork edges--would this tool be a good solution
Answer:	If you’re careful you should be fine with this. It is a scraper and it’s pretty sharp, so it can dig into the wood if you aren’t careful. You might want to try using a heat gun to soften the paint while stripping. Porter Cable makes a really good gun that will work well with this scraper.
Question:	If sharpened, could these be used to shave wood floors to create a hand scraped look
Answer:	Width of widest blade is just over an inch. I doubt you'd get a nice finish because of this. Also, the amount of work, time is considerable. Think about your knees too. At least buy a pair of those gelpads. If it were my floor I'd try to source a scraper plane with a wide blade. Much less danger of gouging. Have seen paint scrapers with an approx. 3inch blade. Might work, don't really know. Great idea though, a scraped floor.
Question:	Can this tool be used to get debris out between gaps in hardwood floors
Answer:	Hello this is Hyde Customer Service. We would not recommend using the Contour Scraper for cleaning debris out between gaps in hardwood floors. You may need something more like a 5-in-1 multi tool with a sharp pointed edge to help with the debris.

Product features

Hyde 10450 Quick-Release Contour Scraper

This professional-grade stainless steel scraper removes paint, varnish, putty, caulk or rust from virtually any surface. Six changeable blades fit into corners, curves and small channels and can be sharpened for repeat use.

A great problem-solver for contractors, homeowners, furniture refinishers and anyone else with a serious job to tackle.

1. Pull lever to release.

2. Remove blade and replace.

3. Press lever to secure.

Comfortable contoured handle keeps hand away from surface.

Flat surfaces, tight corners, round moldings, spindles, small channels, putty removal, caulk removal, crown moldings, chair rails, cove moldings and picture frames.

Product description

Paint stripping disc wheel 3 pieces rust stripper strip discs for 4 x 5/ 8 inch angle grinder for wood metal fiberglass products removing paint coating rust, 3 colors



Good helper:

The stripping wheel strip discs are helpful to remove paint, varnish, welding point, rust and so on, work well on items made of wood, metal and fiberglass.

Provide convenience to change the look of your item.



Different colors:

3 Colors of the paint stripping discs allow you to classify and distinguish easily.



Specifications:

Size: approx.4 x 5/ 8 inch/ 100 x 16 mm

Material: nylon silicon carbide

Color: blue, purple and black



Package includes:

3 x Strip disc



Note:

Since the size above is measured by hand, the size of the actual item you received could be slight different from the size above.

• Wide usages: the paint removing disc is suitable for removing paint, varnish, welding point, rust, sealant and other surface contaminants, good for products made of wood, metal and fiberglass
• 3 Colors: you will get 3 pieces stripping wheels in different colors including blue, purple and black, enough quantity to use, replace and share with families or friends
• Material: these strip discs area made from nylon silicon carbide material, durable to use, help to remove rust and paint effortlessly but will not hurt your items
• Proper size: each rust removal tool is approx. 4 x 5/ 8 inch/ 100 x 16 mm, big enough to clean your items, easy to store and carry
• Fit 4.5 Inch angle grinder: the paint stripping wheel is compatible with 4.5 Inch angle grinder rather wagner paint eater

User questions & answers

Question:	What grit are each color
Answer:	I have forgotten which manufacturer's site I found this info on - and it didn't give specific grit values, but it identified purple as course, black as medium, and blue as fine.

Product description

The FURNO 500 digital temperature heat gun is a household heat gun that’s great for stripping paint, softening adhesives, defrosting pipes, bending PVC pipe, shrinking wrapping electric tubes, and shaping plexiglass and more. It features 12 heat gun adjustable temperature settings ranging from 150°F to 1200°F to easily complete almost any task. All of the settings can be changed with the click of a button! Press the mode selector to set the temperature range and air flow speed. Utilize the two temperature selector buttons to quickly increase or decrease the temperature output. Your selected mode settings will be conveniently and clearly displayed on the LED screen. The heat gun also has several features to make projects even easier; the ergonomic design allows for extended comfort, while the integrated stand allows for hands-free operation. The gun also comes with two nozzle accessories, a glass protector and flare nozzle, to help complete your projects. When the project is complete, you can conveniently hang your heat gun from the built-in loop on the handle for storage.

From the Manufacturer

The FURNO 500 heat gun has 12 temperature settings that range from 150F to 1200F, taking the guess work out of your most common applications. This multi-temperature tool gives you the power to choose the correct temperature range for your application.

• DIGITAL TEMPERATURE HEAT GUNS: The FURNO 500 variable temperature heat gun features 12 temperature settings ranging from 150°F to 1200°F, allowing for precise heat application for nearly any project
• COUNTLESS HOUSEHOLD USES: This hot air tool is the perfect paint remover or paint stripper. It’s also great for softening adhesives, defrosting pipes, bending PVC pipe, shaping plexiglass, embossing and more
• HEAT GUN ADJUSTABLE SETTINGS: The graphic LED screen uses push-button controls to adjust the temperature, change between two airflow speeds, or switch to cool down mode
• INCLUDES TWO NOZZLES: The heat gun includes two nozzles to help complete your projects. Use the glass protector to protect glass surfaces from direct heat while using the gun. Use the flare nozzle to distribute heat across a long, narrow area
• HANDS FREE OPERATION: Features an integrated stand for safe, hands-free operation and the side bars prevent the hot nozzle from touching your work surface

User questions & answers

Question:	Can this be used to heat charcoal for a grill
Answer:	We do not recommend using any of our heat guns to start charcoal in a grill. if you have any questions feel free to call us at 1-800-328-8251.
Question:	Will this work for encaustic wax melting
Answer:	While we have not tried it specifically for this the Furno 300 works great on all kinds of projects that require heat. I would suggest trying it on an inconspicuous piece as a trial. If you would like to discuss this or have other questions feel free to call us at 1-800-328-8251.
Question:	Ok, silly question... anyone use this to reflow ps3 motherboard with ylod
Answer:	Interesting. I understand reflow and motherboard but what is xylod? A type of flux?
Question:	I am wanting to vaporize oxalic acid. It works in a relatively narrow temperature range. Can you tell me what the 6 temperature settings are
Answer:	200,400,500,800,1000 and 1200.

Product features

Versatile Heat Gun for Home Improvement Projects

The FURNO 500 heat gun is a great tool for home improvement and tough jobs that require heat. It can be used to remove paint, bend plastic or PVC, thaw frozen pipes, remove rusted bolts and more.

12 Temperature Settings

This hot gun air tool heat features 12 temperature settings ranging from 150°F to 1200°F, allowing you to tackle a wide variety of heating jobs.

LED Display Screen

The LED screen clearly displays your temperature setting for precise heat output. You can easily change the setting with the click of a button.

Bend and Thaw Pipes

With 12 temperature settings to choose from, you can easily bend and thaw a variety of pipes and materials.

Paint Removal

Customize your heat output to find the ideal temperature setting for paint stripping and removal.

Remove Stickers

Easily remove stuck-on stickers from cars, walls, and other hard surfaces by using the FURNO 500.

Product description

The DEWALT D26960K Heavy Duty Heat Gun with LCD Display has LCD Display that allows users to adjust temperature within 50-Degree increments in a range of 150 to 1100-Degree F. It has a built-Inch overload protection that shuts the heating element down and prevents burn up. A built-Inch hang ring adds a convenient storage feature, and an innovative kickstand support provides greater stability and prevents tip over. The ergonomic comfort grip and lightweight and compact design provides greater comfort for long hours of use. Includes 12 common accessories for versatility and a kit box for easy storage.

• LCD Display allows user to adjust temperature within 50-Degree increments
• Built-in overload protection shuts the heating element down and prevents burn up
• Built-in hang ring adds a convenient storage feature
• Cord Protector keeps the cord from tearing away from the housing
• Built-in innovative kickstand support provides greater stability and prevents tip over

User questions & answers

Question:	does it have a triggger lock
Answer:	Hello Customer, Thanks for your question. Yes, the spare battery for the cordless heat gun is available for sale, you can type " Neu Master 4.0Ah Battery " on Amazon for searching. Please feel free to purchase. And anything else, please feel free to contact us via {[email protected]} for help.
Question:	Does anyone know if it can be used to soften pex for easier bending
Answer:	Dear, thanks for your question. The hot air gun can run about 15 minutes on a full 4.0 battery. And anything else, please feel free to contact us via {[email protected]} for professional help.
Question:	is it good for making cosplays and heating foam
Answer:	Hello Joe, No, NEU MASTER lithium products only compatible with Neu Master battery-pack. Hope it can help you. Please feel free to contact us via [[email protected]] if you have any issue and we will answer you ASAP. Spartatool Support Team
Question:	I am stripping old paint on some old doors & frames inside . I want to get all the paint off ,then stain. Is this gun safe for indoor use
Answer:	Hello Customer, Yes, the cordless hot air gun equipped with a lock-off the trigger to engage manual operation and achieve hands-free. Hope it can help you. And anything else, please feel free to contact us via [ [email protected] ] for professional help.

Product features

DEWALT D26960K

- LCD display allows user to adjust temperature within 50-degree increments

- Built-in hang ring adds a convenient storage feature

- Built-in innovative kickstand support provides greater stability and prevents tip over

- Lightweight and compact design weighs only 2.3 lbs

- Built-in overload protection shuts the heating element down and prevents burn up

- Cord protector keeps the cord from tearing away from the housing

- Ergonomic comfort grip provides greater comfort for long hours of use

Product description

Take the frustration out of paint removal and surface prep with the Wagner Paint Eater. This unique tool is designed and optimized to remove peeling paint without damaging the substrate, allowing for a smooth, long-lasting new coat of paint. The special fiber disk with embedded abrasive effectively removes paint chips without clogging with paint and dust. The Wagner Paint Eater has received the Member Tested and Recommended and the Contractor Tested and Recommended Seal from the Handyman Club of America. This is an independent group that tests and rates products. At least 2 out of 3 testers must recommend this product in order to earn the seal.

The Wagner PaintEater is a one-step paint remover that's aggressive on paint but gentle on siding and trim. Included in the system are the PaintEater machine and 3M spun-fiber disc, which work together to get rid of paint, feather rough edges, and smooth the surface of wood, masonite, steel, or concrete. In just one step the PaintEater eliminates the time-consuming, labor-intensive chores of traditional exterior-paint prep and ensures that your new paint will go on smoother, adhere better, and last longer.

Quickly and Easily Prep Your Home's Exterior

Painting a home's exterior is a big project, but one that pays off in curb appeal as well as protection for your home. The first and most tedious step in painting your home is to get rid of loose or flaking paint and to prepare a smooth surface for a fresh coat. The PaintEater is an award-winning tool from Wagner Spray Tech and 3M that will help make quick work of this process.

The Wagner PaintEater was awarded the Handyman Club of America's Member Tested and Recommended Seal and Contractor Tested and Recommended Seal.

Aggressive on Paint, Gentle on Siding and Trim

The Wagner PaintEater aggressively removes paint but is easy on underlying substrate. With the PaintEater you can prepare most outdoor surfaces, including wood and masonite siding, concrete, and steel. The machine's powerful, 3.2-amp motor delivers 2,600 RPM for removing even the most stubborn pain, paint oxides, and mildew; this optimal rotary speed gives just the right combination of performance and control.

Flex-Disc System for Precise Results

The PaintEater combines a high-powered machine and a tough 3M spun-fiber disc with high-performance abrasive embedded into the fibers. Together they provide you with speed, power, performance, and control, so you don't have to worry about damaging surfaces.

The PaintEater's innovative Flex-Disc System allows the disc to conform to surfaces for precise results around flat trim and siding. The disc can be operated on its edge--to remove stubborn paint chips--or flat--to smooth or feather edges. The outer edge of the disc is ideal for preparing the surface underneath lap siding. The disc's compact size--4-1/2 inches--allows you to access tight corners; its open-web design minimizes buildup of paint and dust and allows the disc to easily glide over screws, nails, or sharp edges without damage.

Removing the disc is just as simple as using it--no tools required. Simply engage the arbor lock and unscrew.

Ergonomic Design Provides Comfort and Safety

The PaintEater is ergonomically designed to allow for multiple hand positions and to ease hand fatigue. It can safely be used with either the right hand or left hand, and the retractable handle and soft-grip cover allow you to easily switch between one-handed and two-handed operation. And even with its rugged, glass-filled polypropylene body, the PaintEater is lightweight enough for you to carry from job to job.

A shroud design at the base of the unit ensures that your hands stay safely away from the disc during operation. For added protection, the PaintEater features a Velcro strap for securing the tool safely to your hand when working on a ladder, rooftop, or when you just need extra leverage. For peace of mind, a silicon boot protects the on/off switch from dust and moisture.

The Wagner PaintEater is backed by a one-year limited warranty.

What's in the Box

Wagner PaintEater and 3M disc.

From the Manufacturer

The Wagner PaintEater 4-1/2 in. Disc Sander is tough on paint but gentle on the surface. The high-performance, spun-fiber disc operates at 2,600 RPM to provide the proper combination of disc performance and user control and features an open-web disc design to minimize paint and dust build-up. Use the sander on its edge to remove paint chips, or operate it flat for smooth, feathered paint edges that create an ideal surface for repainting.

• A Velcro strap for a secure hand position & ladder work
• Arbor lock for tool-less disk replacement
• Innovative, contour conforming FLEX-DISC System

User questions & answers

Question:	What is the circumference of the body of this tool? Can a woman with smaller hands use this comfortably? Thank you
Answer:	I'm sorry but I've never tried it on PVC but I can say that it does get really hot when shrink wrapping. My guess though is that it will provide enough heat for thin walled PVC pipe.
Question:	This only mentions "exterior" Can it be used with this pad to strip stairs, bannister trim? 3M-Scotch-Brite-Contour-Surface-9413NA
Answer:	I don't see why it wouldn't. The heat shrink/solder butt-splice connectors I've been using recently specify 80 C to melt the adhesive and 138 C to melt the solder. Most regular heat shrink tubing takes a lot less than 80 C to shrink it. I've been using the Recollections heat embossing tool I "borrowed" from my wife's crafting stash to repair some broken wires in my truck and it worked great for the heat shrink and the shrink/solder butt-splice connectors, although on the larger connectors with more solder, it did sometimes take an extra minute or so, but still worked without issue. As the Homidic Mini Handheld Hot Air Gun in this listing has similar wattage specs, I'd think it would do as well or maybe even better as the nozzle looks a little smaller on this one and it claims to reach 200 degrees (I assume Celsius as most heat guns seem to state temps in Celsius first).
Question:	I have a large old barn with peeling red paint...will this stripper remove the peeling paint
Answer:	wire heat shrink? takes a bit
Question:	How to fix disengaged disc from shaft? I love it!!! Bought two and they broke the same
Answer:	I haven't sealed bubble wrap, however, I've used it to seal shrink wrap. It does well but after a min of usage it won't come back on until it cools down. So if you have a bunch of items to seal you may want to get a higher wattage heat gun.

Product features

Easily Prep Your Deck for Refinishing

The Wagner PaintEATER is an electric palm sander that efficiently strips away flaking finishes, leaving you with a smooth surface to apply a fresh new coat. Prepping your deck, fence or home exterior with the PaintEATER allows for the new coat of paint to adhere better, giving you a longer lasting finish.

Aggressive on Paint, Gentle on Siding and Trim

The PaintEATER features a high-performance, spun-fiber disc that operates at 2,000 RPM to easily remove chipped finishes on wood, Masonite siding, concrete, steel and more. The disc conforms to surfaces and provides ultimate control so you don’t have to worry about damaging delicate areas.

Ergonomic and Effective Design

The PaintEATER’s ergonomic design allows for multiple hand positions to reduce hand fatigue. Plus the sander features a retractable handle and soft-grip cover to easily switch between one or two handed operation.

Decks

Refinishing your deck this summer? Quickly remove the old finish by using the PaintEATER.

Exterior Siding

Remodeling a home exterior can be a big task. Make your job easier by using this orbital sander.

Trim and More

The PaintEATER can also be used to remove old finishes on small areas like trim, furniture, shutters and more.

Product description

CS Unitec’s EOF 100 paintshaver efficiently and effectively removes up to 5x faster than sander tools on a variety of materials from wood, plaster, concrete, metal and more. The EOF 100 removal tool includes: electronic soft start, ergonomic soft-grip/non-slip handles, and upgraded adjustable dust guard that allows for stripping stably right to the edge of a surface. Precise depth adjustment to 1.0mm for material removal without milling into the substrate. 2 types of replacement carbide milling discs available (Wood/Softer Materials P/N 37124000 For Concrete/Harder Material P/N 37125000). This paint stripper removes varnish, paint, graffiti, resins, coatings, solids, sprays and greasy dirt from wood, plaster, concrete, and other surfaces without unhealthy odors or exposure to hazardous chemicals. Specifications: Weight: 7lbs Load Speed: 10,000 rpm Spindle Connection: M14 male Included Components: 1x EOF 100 Paint Peeler, 1x Case, 1x Assembly Tools.

• The EOF 100 Electric Paint Scraper Is Up to 5x Faster Than Traditional Power Sanders with Less Vibration, Soft Start, and Ergonomic Handles for Increased Operator Comfort.
• This Light-weight , Heavy-Duty Professional Planer Removes Varnish, Paint, Graffiti, Latex, Resins, Coatings, Solids, Greasy Dirt, Sprays & More.
• Tool For Use On Wood, Concrete, Metal, Aircraft, Boats, Decks, Siding, Walls & more. Low Clearance - Mill Right To The Edge.
• Dust Extaction Port For Reducing Exposure to Unhealthy Odors and Hazardous Chemicals (When Used With Dust Extraction Vacuum).
• Milling Head Diameter 4", Depth Adjustment 0.1 mm to 1.0 mm, 7lbs, Replaceable Carbide Milling Discs For Use On Wood/Softer Materials (P/N 37124000) For Concrete/Harder Material (P/N 37125000).