13 best generic airless paint sprayers
Product description
SPECIFICATIONS:
Oem: 17C721 17C-721
Material: Alloy
Size: 8.66in length(Approx.)
Color: Silver
Package contents: 1 * Pump Body Assembly
Material:It is made of high-quality alloy material, wear-resistant,
Increase the flow pump body, large flow.
Using: Cylinder will never wear, easy to replace parts,
economical and practical, Professional installation is recommended.
NOTE:
Many Buyers Choose This Product, Please Place an Order Directly, Will not let You Down!
- 【High quality】It is made of high-quality alloy material, wear-resistant,long-lasting to use.
- 【Professional installation】easy to replace parts, economical and practical, Easy to install, Good choice for customers.
- 【OEM NUMBER】Airless sprayer Pump Replace For OEM # 17C721 17C-721.
- 【Fitment】For Sprayer Pump 390 395 490 495 595 Pro 210 ES Rental Pro 210PC 230 PC.
- 【Guarantee】If You Have Any Question, Please Contact Us We’ll Process Full Refund or Send You a Replacement, No loss in this purchase.
Product description
Q&A
Question:
will this 50ft hose work with krause and becker airless paint sprayer
Answer:
yes, If you are adding onto another hose you will need buy a 1/4 male coupler
Question:
Will it work with a graco mgnumx7 airless spayer?
Answer:
Spayer model does't matter. It's the connection diameter. With that kind of question yoy may not have the skills to use it
Specifications:
Material: Fiber tube
Color: Blue
Length: Approx.15m/50 ft
Inner diameter:6 mm/0.25 inch
Outer diameter: 13.5mm/0.53 inch
Maximum Pressure:4350psi
Working pressure: 3300 Bar
Burst pressure: 4500 Bar
- ☆ Best Choice ☆ >>> - 15m/50ft, 1/4 inch 4350PSI airless sprayer high-pressure pipe fittings, softness good, good flexibility, under high pressure can still be easily pulling, not curled.
- ☆ High Quality ☆ >>> - Bearing pressure, pulse superior performance, combined tube tightly. Small fluid resistance, the volume expansion is small, does not affect the pressure.
- ☆ Reliable & Durable ☆ >>> - The joint tightness super good place to corrosion, to adapt to all kinds of paint.
- ☆ Portable ☆ >>> - This extension tube is light weight, easy to carry;
- ☆ Safety ☆ >>> - Inner conductive strip sandwich, to prevent leakage caused by physical injury, machine damage and other possibilities, increase the safety factor.
Product description
Electric Airless Air Less Paint Gun Sprayer
- Electric Airless Air Less Paint Gun Sprayer
User questions & answers
Question: | Will it work with oil paint |
Answer: | My 3 car garage was a little over 600 sq ft. and I used just under 2 kits. For an 800 sq ft area, I suggest 3 kits. |
Product description
Description:
- This spray guide tool is made of metal, good workmanship design and durable
- The spray guide tool can quickly spray edges and trim, for your convenient use
- The universal spray guide accessory tool for home wall color separated spraying
- This spray guide tool is designed for airless spraying machine, easy to install
- It fits most spray tools that are 7/8 inch
Specification:
- Material: Metal
- Size: 21 x 12 x 4cm/8.26 x 4.72 x 1.57in
Package Includes:
1 x Spray Guide Tool
Note:
Due to the light and screen difference, the item's color may be slightly different from the pictures.
Please allow 1-3mm differences due to manual measurement.
Choose all you need in our store. You will have a nice purchase experience and get quality products and service corresponding to the policy of Amazon.
- * The spray guide tool can quickly spray edges and trim, for your convenient use
- * This spray guide tool is made of metal, good workmanship design and durable
- * This spray guide tool is designed for airless spraying machine, easy to install
- * The universal spray guide accessory tool for home wall color separated spraying
- * It fits most spray tools that are 7/8 inch
Product description
SPECIFICATIONS:
Oem: 17C721 17C-721
Material: Alloy
Size: 8.66in length(Approx.)
Color: Silver
Package contents: 1 * Pump Body Assembly
Material:It is made of high-quality alloy material, wear-resistant,
Increase the flow pump body, large flow.
Using: Cylinder will never wear, easy to replace parts,
economical and practical, Professional installation is recommended.
NOTE:
Many Buyers Choose This Product, Please Place an Order Directly, Will not let You Down!
- 【High quality】It is made of high-quality alloy material, wear-resistant,long-lasting to use.
- 【Professional installation】easy to replace parts, economical and practical, Easy to install, Good choice for customers.
- 【OEM NUMBER】Airless sprayer Pump Replace For OEM # 17C721 17C-721.
- 【Fitment】For Sprayer Pump 390 395 490 495 595 Pro 210 ES Rental Pro 210PC 230 PC.
- 【Guarantee】If You Have Any Question, Please Contact Us We’ll Process Full Refund or Send You a Replacement, No loss in this purchase.
Product description
Package Included:
1 x Paint Spray (With Base)
1 x517 Airless Spray Nozzle (With Seal)
2 x Airless Paint Spray Gun Filter
- Airless spray gun is perfect for varnishing and dispersion paints.
- Made of stainless steel, rust resistant, sturdy and durable.Distance of spray: 300 mm.Pressure output: 20.7MPA.
- Widely used in ships, bridges, towers, poles and other large long-term metal structures of the industry anti-corrosion and painting of the construction industry.
- Designed in the design of filters, easy to replace, it is possible to filter the paint to reduce nozzle clogging.
- Ergonomic handle designed to reduce fatigue.Fast, easy to clean, easy to use, excellent atomization.
User questions & answers
Question: | is it electric |
Answer: | i don.t no i tossed my spray gun across the room and then into the trash and then spent 45 minutes cleaning up the mess the gun made when i tryed to use it and i use to do auto body work so i no what i am doing it was pure junk no other word for it. |
Question: | Will graco tip and tip guard fit this gun |
Answer: | I applied it in March in Oregon and it was fine. Pick a nice day. |
Question: | Is the one-year warranty real |
Answer: | I assume you mean after it is applied. Check the safety data sheets. As an experience, epoxy will yellow in direct sun but still do it's job keeping dust and dirt very easy to clean and great to use |
Question: | What is the filter mesh size and are othersizes available |
Answer: | Etching is not included. |
Product description
AeroPro Airless Paint Spray Gun has an in-handle mesh paint filter to reduce tip-clogs and improve finish application. Equipped with a standard 517 tip (0.017" or 0.43 mm), it can spray pattern width from 9.8" to 12.2" (250 - 310 mm) and distance as far as 11.8" (300 mm)
- compatible with Graco, Titan, Ryobi, RAP Series, and Homeright Brands
- In-handle paint filter reduces tip clogs and improves finish
- Well-balanced and light weight--only 1.2 lb
- Full trigger (4-finger) locks open for flushing and cleaning
- Reversible 517 Tip, Inlet fitting 1/4 Inch Thread, Swivel Joint
User questions & answers
Question: | Us made? or is it just a part of the title? please clarify. also where is the warranty info |
Answer: | It is a gun only, that goes on an electric airless paint sprayer. |
Question: | Does it fit a Wagner paint crew xtra |
Answer: | Yes,It should |
Question: | will it work with campbellhausfeld sprayer al066021sv |
Answer: | Sure,As Advertise |
Question: | Will this gun work with a krause & becker airless sprayer (as sold by harbor freight |
Answer: | Standard "Titan" filters will fit,green, yellow,& white in that order are heavy,medium,&fine, depending on the viscosity of your materials |
Product description
✨✨✨ Unthreaded filter design for quick and easy replacement. ✨✨✨ Fine, 100 mesh gun filter for fine materials such as high gloss, top-coat materials, base coat enamels, primer enamels, fillers, marking paints, textured enamels. ✨✨✨ Remove undesirable debris and prolong sprayer life, reduces tip clogging and improves finish. ✨✨✨ Made by a seasoned wire mesh manufacturer with over 25 years of experience in metal wire mesh and fabrication, supplying paint sprayer filters to distributors globally.
- PLEASE NOTE: The authentic RG WIRE MESH brand is from RG WIRE MESH store only.
- Generic manufacture. Meets all OEM requirements, See your manual for detailed filter part model. High quality aftermarket, ship in non-retail packaging.
Product description
Gravity feed spray gun, 1.4 mm fluid tip, 20 oz canister size, 4.5 scfm at 40psi, 1.5 inch - 9.0 inch fan pattern, ideal for most automotive painting, painting furniture & painting equipment, allows for easy clean up & minimizes the waste of material left in the canister, 1 year limited warranty.
From the Manufacturer
For painting autos, equipment and furniture, this gravity-fed spray gun will produce an even coating that looks great and minimizes mess. The gravity feed canister allows for easy clean-up and minimizes the waste of material left in the canister. Polished aluminum housing is easy to clean. Tip produces 1.5- to 9-Inch fan pattern, and canister holds up to 20 ounces of paint. Paint like a pro with this gravity-fed spray gun.
- The product is gravity feed spray gun
- Easy and simple use kit
- The product is manufactured in china
- Low overspray and fin atomization; controls to adjust both fluid/air flow and spray pattern make dialing in the perfect settings easy
- 600 mL gravity feed design helps with easy clean up and minimizes the waste of material left in the canister; polished aluminum housing also allows for easy clean up
- Ideal for most automotive painting, furniture painting and equipment painting. Can be used with lacquers, basecoat/clear coat systems and polyurethane/urethane top coats
- Requires 4.0 SCFM at 40 PSI. Canister capacity holds 20 ounces
- Finish your projects faster and easier with Campbell Hausfeld - The Air Power
User questions & answers
Question: | Can i buy a replacement paint cup? A link would be great |
Answer: | Yes you can buy a replacement cup. The instructions manual that comes with the paint gun has a parts list. Go to the Campbell Hausfeld web site. |
Question: | Can I use it for painting interior walls? On how many psi needs my compressor to be set up |
Answer: | Yes you can paint walls with this gun. But it may take a while since the canister is only 600 ml. The gun requires a compressor that can deliver 4.5 CFM at 40 PSI. The operating pressure is 45 - 50 PSI. The maximum inlet pressure is 80 PSI |
Question: | Can I hook this up to siphon directly from the paint/stain container or will I have to spray a quart at a time |
Answer: | You will not be able to attach this directly to a the paint/stain container. But you can use it with a pressurized paint tank. These can be found at paint supply stores, hardware stores, or online |
Question: | I’m thinking of buying this for diy furniture projects at home, I have an air compressor, is there anything else I will need to purchase to operate |
Answer: | We would also recommend an inline dryer and filter system. This for removing any moisture or debris from the airline that can contaminate the paint. These should be installed as far from compressor tank and as close to the spray gun as possible. The part number for the general purpose filter is PA212103AV. The part number for the dryer is PA208503AV. |
Product features
Easy to Use Gravity Feed Spray Gun
The Campbell Hausfeld general-purpose, gravity-feed HVLP spray gun (DH580000AV) designed to spray all light- to medium-viscosity materials, including primers, enamels, lacquers, basecoat/clear coat systems and polyurethane/urethane top coats. Controls to adjust fluid flow, air flow and spray pattern make it easy to dial in the perfect settings for great results. The 600 mL gravity-feed canister makes cleanup easier and minimizes material waste. Finish your projects with Campbell Hausfeld.
Efficient HVLP Design
The efficient high volume low pressure spray gun features a 20 ounce canister capacity, allowing for uniterrupted use. In addition, the gravity feed design maximizes paint use, leading to minimal waste.
Start Your Projects Right Away
The DH580000AV also includes 2 in-line paint filters, a wrench, a 6mm hex wrench, and a cleaning brush; start your projects right out of the box.
The Results You Want
This sprayer features pattern, material, and air spray settings. The DH580000AV also handles all light- to medium-viscosity materials, including primers, enamels, lacquers, basecoat/clear coat systems and polyurethane/urethane top coats.
Tackle a Variety of Paint Jobs
The DH580000AV Spray Gun is ideal for most automotive painting, furniture painting and equipment painting applications.
- 【3 Spray Patterns & 5 Nozzle Sizes】Paint sprayer can be adjusted to 3 different spray patterns: horizontal, vertical and circular, and equipped with 5 size nozzles (1.2mm/1.5mm/1.8mm/2.5mm/3.0mm) for any painting projects, such as furniture, cars, fences, interior walls, garage doors, garden tables and chairs etc.;
- 【Perfect Design For User Experience】Detachable, making it easier to use and clean; the paint output can be controled by adjusting the flow control knob on the sprayer to obtain different paint output; The 6.6ft power cord is long enough to allow you to move freely within a larger work area;
- 【High-Quality Materials】Using copper nozzles can withstand pressure more than plastic nozzles, and is less prone to clogging. It can also make the spraying surface more concentrated and more uniform. The use of double-layer insulation materials allows you to avoid worrying about any safety issues during operation;
- 【Powerful Upgrade Advantages】The rear foam pad can prevent paint from flowing backwards, block the nozzle, and make the spray more uniform; it also has dust and moisture resistance functions, which can not only extend the life of the motor, but also ensure the purity and effect of spray color;
- 【Package Contents】1X Paint Sprayer, 1X 1000 ml Paint Container, 5X Size Nozzles, 1X Viscosity Cup , 1X Nozzle Cleaning Needle, 1X Cleaning Brush, 1X Spanner, 1X Lid Pot, 1X User Manual. If you have any questions, please contact with us, our technical team and after-sales team are always behind you.
User questions & answers
Question: | Does this clog often |
Answer: | I have been using it for several months and the nozzle is not clogged. Because this is a brass nozzle, not plastic. Also, pls remember clean it after each use. |
Question: | I lost my manual can do you have a pdf version |
Answer: | You can contact seller directly using the link (click) on your order. They will send a electronic manual to you. |
Question: | I need some spare parts for my Yattich 500 watt spray gun, where can I buy them |
Answer: | I also asked this question to the seller through the order, and the answer was: they will soon have a 1000ml container together with other spare parts for sale separately. |
Question: | Can both latex and oil based products be used in the same spray container and how do you clean after using oil base |
Answer: | Normally, I do not recommend that latex paints and oil-based paint products are not cleaned after using one kind of paint, and use the other directly. After using the latex paint (or oil paint), put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean. |
Product features
3 Spray Patterns
- Three different types of spray patterns by simply adjusting the location of air cap: Horizontal-Vertical-Circular.
- The flow control knob is a perfect design for you to adjust the flow rate at any time.
Copper Nozzles Size
- More options, and suitable for more occasions and projects.
- Compared with plastic nozzles, 5 copper nozzles can make the sprayer have better durability and not easy to block, and can reduce resistance and maintain good operating temperature and extend motor life.
Detachable
- Detachable design, the first is to consider portability, and is mainly convenient for quick and easy cleaning after spraying.
- Every component is tested, can pass through 1.5m height drop test with full load in the bottle.
Adjustable Flow Control
- By adjusting the flow knob to control the coating speed and the flow rate of the project size, you can achieve precise paint work.
- With a maximum flow rate of 800ml / min, it is suitable for edges, corners and wide inner / outer surfaces of various work and DIY projects.
Wood Products
- For chair, table, shutter, cabinets, wooden artwork, DIY etc.
- Note: The smaller the size, the finer and the higher the surface quality.
Crafts Steel Furniture
- For car, bicycle, model, railings, heating pipes, window frames, boats, garage doors, metal garden fences etc.
Interior / Exterior Walls
- For internal wall, external walls, outdoor floors etc.
Garden Projects
- For yard furniture, wooden garden fences, wooden pile, corridor etc.
Warm Tips:
1. Before using, please choose proper copper nozzle, spray patterns. Check if you have tighten up the container and paint tube; In addition, we recommend that you test on cardboard or wooden boards before spraying important items, such as walls or furniture.
2. Please add some water(or paint thinner) to dilute the paint and stir to ensure that your paint passes smoothly through the viscosity cup within 100 seconds and meets your requirements.
3. After finishing spraying put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean.
4. Please wash the sprayer gun immediately with the brush. All parts of the paint sprayer are detachable.
5. Most importantly, please read the product user manual carefully before using it.
TECHNICAL DATA:
Model; YT-191
Voltage: 110V / 60Hz
Power consumption: 500W
Nozzle size: 1.2, 1.5, 1.8, 2.0. 2.5, 3.0 mm
Max flow: 800 ml/min
Max viscosity: 100 DIN-s
Power cord: 2m
Spraying pressure: 0.1-0.2 bar
Vibration Level: < 2.5m/s²
N. Weight: 1.37 kg
Product description
The Super Finish Max does it all. From furniture and cabinets to fences and walls, this sprayer can cover a wider array of projects and coatings with less thinning and hassle. This High Volume, Low Pressure (HVLP) sprayer has a turbine motor, which means that an air compressor isn’t needed! The six available spray tip sizes (3 included) allow for ultimate customization of paint flow for all of your projects! The two different air caps allow for a wide or fine spray pattern and the volume control knob provides further customization of paint flow. The Super Finish Max is ideal for oil or water based materials such as: chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. 450 watts of power sprays thicker paints with less thinning! The newly-designed pickup tube and cup vent allow for quicker and easier clean-up. The built-in access door makes for easy inlet air filter changes and the large 39-ounce container capacity means less stopping to refill. Includes: Super Finish Max, container lid, cleaning brush, 4. 0 mm nozzle and tip (red), 2. 0 mm nozzle and tip (green), 1. 5 mm nozzle and tip (blue), wrench, wide spray pattern cap (yellow), fine spray pattern cap (black). Spray Gun Tip Included. Spray Tip Pattern Size (in.)-8(in).Performance Features : Adjustable Spray Width,Air Flow Valve,Flow Control,Low Overspray
- PAINT SPRAYER FOR COUNTLESS DIY PROJECTS: The HomeRight Super Finish Max paint sprayer offers the ultimate DIYing experience. It’s an easy-to-use electric paint sprayer that’s the perfect step up from the Quick Finish and Finish Max paint sprayers. It’s great for applying a professional-like finish on countless small to large sized DIY projects like fences, decks, furniture, cabinets, dressers and more!
- ADJUSTABLE SETTINGS TO SUIT ANY PROJECT: The paint spray gun features easily adjustable settings to help complete any project. You can adjust the air cap to spray horizontal, vertical, and round. You can also adjust the material flow control knob to quickly increase or decrease the material output to customize your paint flow and project/coating needs
- MORE POWER=SPRAY MORE MATERIALS: The Super Finish Max offers 450 watts of powerful spraying experience, which is great for projects big and small. It can be used to spray a wide variety of paints and stains such as chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. When you’re done with your project, simply clean the sprayer with water for water based materials or mineral spirits for oil based. The sprayer also comes with a useful cleaning brush to make clean-up quicker
- 3 BRASS SPRAY TIPS INCLUDED FOR GREAT FINISH ON COUNTLESS PROJECTS: This professional quality paint sprayer includes three brass spray tips to suit your project needs. These brass spray tips offer superior performance and precision over plastic counterparts. They provide consistent, high quality spray pattern and offer corrosion and wear resistances. Use the 4.0mm (red) tip for primer and latex paint, 2.0mm (green installed on sprayer) for latex and chalk paint, and 1.5 mm (blue) for stains and sealers.
- U.S. BASED CUSTOMER SERVICE AND 2 YEAR WARRANTY: If you have any questions about your sprayer, please call or chat with our HomeRight U.S based customer service team for quick and efficient assistance. We’re proud of our products, which is why the Super Finish Max is backed by a 2 year warranty
User questions & answers
Question: | So if I use this with Oil based paints wouldn't there be a different approach to clean up |
Answer: | There is a slightly different approach for oil based paints. Instead of using warm water to clean the unit, you'd use a cleaning solvent like mineral spirits. |
Question: | Would i have to thin benjamin moore's advance paint |
Answer: | The Super Finish Max should be able to spray it with no thinning required, but extremely thick paints may need to be thinned down slightly. Spray your paint on a piece of cardboard to test for the right paint flow. |
Question: | Does this require a compressor |
Answer: | No, the Super Finish Max does not require a compressor. It is a plug-in unit, which means all you need is a standard power outlet. |
Question: | Will this spray rustoleum oil based paint |
Answer: | Greetings! If you go to https://www.homeright.com/products/super-finish-max-extra you will see the link to download the manual for this terrific paint sprayer! Yes, you can spray oil based paints, but you’ll need to make sure to use the proper spray tip. This sprayer comes with the 1.5mm, 2mm and 4mm tips of which you would use the 1.5mm for oil based paints, stains, polyurethane, etc. You can also purchase separately the 1mm tip for such things as sealer and varnish to obtain an even finer spray. Please note that there is also a 2.5mm and 3.5mm tips available as well. The suggested use for all these tips are explained in detail on page 5 of the manual. Thinning may be necessary and you should do so based on the paint manufacturer’s guidelines. Please note that this sprayer is NOT meant to spray automotive paints as those paints need an even finer spray than what this sprayer produces. I would also suggest you sign up for Homeright’s newsletter, as they send out a variety of projects to use this sprayer and you can learn a great deal on how to use it. Good Luck and Enjoy!!! |
Product features
Taking On Do-It-Yourself Projects
With 450 watts of power, the Super Finish Max Paint Sprayer can handle thicker paints and varnishes which means no thinning.
More Versatile
With 6 available spray tips (3 included), you can tackle a wide variety of projects such as furniture and cabinets, but also take on fences and decks which are uses typically outside the capability of an HVLP sprayer.
Larger Capacity
The 39 fluid ounce container enables you to spray larger projects without having to refill as often, saving you time.
Furniture
Fences
Cabinets
How it Works
The Super Finish Max uses precision brass spray tips and nozzles, which provide superior performance over their plastic counterparts.
With 450 watts of power, combined with an adjustable air cap, the sprayer atomizes paint into tiny particles. These tiny particles are what is necessary for a fine factory-like finish.
Competitor's units can only spray chunks of paint, which after a couple of coats resembles a rough, paint roller-like finish.
- 🔰 𝟑 𝐏𝐨𝐰𝐞𝐫𝐟𝐮𝐥𝐥 𝐌𝐨𝐝𝐞𝐬 - Scuddles Electric paint sprayer features 3 Unique spray patterns which include vertical circular and horizontal; Scuddles paint gun is great for tables, chairs, fences, car, interior walls or crafts.
- 🔰 𝐒𝐚𝐯𝐞 𝐓𝐢𝐦𝐞 - its time saver because when using a brush it takes longer to get the paint in in harder to reach places; The recommended spray distance to surface is 10 TO 14 INCHES of the surface you are painting; Scuddles paint machine features various nozzle sizes (1.8mm/2.2 mm/2.6mm). The 1.8mm and 2.2mm nozzle are great for thinner paints like sealers and varnishes. 2.6mm nozzle is great for spraying latex paint, chalk type paint or any thicker type of paint.
- 🔰 𝐍𝐨 𝐓𝐨𝐨𝐥𝐬 𝐍𝐞𝐞𝐝𝐞𝐝– The paint sprayer is a no tools needed to assemble, just use it straight out of the box! it also Features a long power cord which will allow you to use in a larger workspace. scuddles paint sprayer is designed to be lightweight and to fit in your hand allowing you to do your spray-painting for longer periods without causing fatigue.
- 🔰 𝐄𝐱𝐭𝐫𝐚 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃 - Scuddles paint gun comes with many packaged cleaning attachments, such as 2 extra straws, 5 nozzle caps which are made to help you adjust your paint flow according to the thickness of the paint.
- 🔰 𝐖𝐡𝐚𝐭𝐬 𝐈𝐧 𝐓𝐡𝐞 𝐁𝐨𝐱 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐝 – 1X Scuddles Spray Gun; 1X 1000 ml paint Container; 1X Funnel; 2X Straws; 1X Cleaning Needle; 5X Spray Nozzles; 1X User Manual; We also offer extra replacement containers and straws, so that you can keep different colors of paint within different canisters.
User questions & answers
Question: | Can it be used with polyurethane and or lacquer |
Answer: | I used it for stain for 180 foot fence and it was awesome. Have a roller ready to catch drips. |
Question: | What is the maximum viscosity that it can get |
Answer: | I used Latex paint with a small amount of water to thin it. No problems whatsoever! |
Question: | Can this be used to paint stucco walls |
Answer: | Hi, Please try it first to a small portion before spraying it on everything on the stucco walls. Thank you. |
Question: | can I use with latex paint |
Answer: | yes but there is a good trick not to get the canester dirty by placing the paint in a bag inside the canister |
Product features
Built for Power
5 Nozzles
Scuddles Paint Sprayer comes with three 2.6 mm nozzles which are great for thick paints, such as latex, chalk type paints. The 1.8 mm & 2.2 mm nozzles are made for thin paints, such as for thin paints, sealers, and varnish.
3 Straws, Cleaning Brush and Pin
The cleaning brush and unclogging pin make it easy for you to clean out the straws and machine. There are 3 straws included, to help reduce the amount of cleaning work.
Large Paint Container and Funnel
The 34 oz. (1000 ml) container holds a large amount of product. Replacement bottles and straws are available for purchase to make switching between paints quick and easy.
OUTDOORS
Great for outdoor projects, such as fencing, siding, and decks.
INDOORS
Use to prime and paint walls, doors, molding, and more!
HOBBY
Great for crafts, wood, and furniture. Get creative!
Product description
The DIY Series are perfect entry-level sprayers for tackling home projects such as doors, trim, furniture, interior walls, ceilings, decks and fences. Ideal for those painting up to 50 gallons per year. The Magnum Project Painter Plus delivers amazing results with speed and finesse, allowing you to finish your project in half the time it would take using brushes and rollers. The high-speed performance of this sprayer puts you in the driver's seat with fully-adjustable pressure. Give your projects the reach they need, since this lightweight sprayer can support up to 50 ft. of paint hose. You can spray directly from a 1 or 5 gal. bucket with its flexible suction tube and clean up in no time with the PowerFlush adapter.
From the Manufacturer
Graco - The Brand Preferred by Pros. Whether you’re a weekend warrior, a serious DIY enthusiast, a handyman or remodeling contractor, or a painting professional, Graco makes the ideal airless spraying equipment to meet your needs. Whether you are just starting out or moving up, choose the Magnum or Graco model to help you handle your job with ease. No matter what you're painting—entire homes, rooms, decks or fences—Graco has you covered!
- CONTROL PAINT FLOW: Fully adjustable pressure to give you ultimate control of paint flow for any project size; RAC IV Switch Tip allows you to reverse the tip when clogged to keep you spraying
- SPRAY PAINT UNTHINNED: Stainless Steel Piston Pump allows you to spray paint unthinned at high pressure. Compatible Tip Size (inch)- 0.009, 0.011, 0.013, 0.015
- SPRAY DIRECTLY FROM PAINT BUCKET: Flexible suction tube allows you to spray directly from a 1 or 5 gallon paint bucket
- RECOMMENDED USE: Annual use recommendation is up to 50 gallons per year
- EASY TO STORE: Extra storage compartments provide space to store the spray gun, extra spray tips, and power cord
- FAST AND EASY CLEAN-UP: PowerFlush Adapter connects to a garden hose for fast and easy cleaning
- IDEAL FOR HARD TO REACH AREAS: Can support up to 50 ft. of paint hose to reach peaks or second stories without diminishing performance
- VOLTAGE: 110 volts; ETL Certified, ETL File #3174859MIN-001
User questions & answers
Question: | Can i paint kitchen cabinets with this paint sprayer |
Answer: | I didn't see any problem as low as you have the right paint. Just protect against over spray on things you don't want painted. |
Question: | Is this electric or run by air |
Answer: | Electric sprayer. But it is airless, you just plug it in to a 110 outlet...put the suction hose in a 5 gallon bucket of paint...and paint away! |
Question: | If using outside, what sort of over spray does this create? I live on a busy street and don't want to end up getting cars parked nearby with overspray |
Answer: | I've been a painter for over 20 yrs and used many sprayers, any paint atomized to spray will float 200 ft and stick to a car with very little breeze. Buy .01 mil plastic and cover any cars within 200 ft in the direction of any breeze, it the wind is blowing towards your back yard, paint quick before it changes direction. usually spray will settle within a 10 to 20 ft area from an outside wall with the most paint being in a 3 ft area below the wall. Plastic is cheaper than painting a nice car for someone else !!! |
Question: | Can this spray benjamin moore advance paint (waterborne alkyd paint) unthinned? if yes, what size tip do i use |
Answer: | The max spray tip is the key. I have a Graco X7 Magnum Pro and my max tip size is .017. This is found in the last two numbers of the number on the tip. So a tip marked 517 would mean that the spray tip orifice is .017. The “5” is half the width of the spray fan pattern. So the 517 tip would spray a pattern that is 10 inches wide (5 x 2) and would spray a paint that requires an .017 orifice which is a very thick paint. The orifice size requirement can be found in the paint specifications. This unit comes with a 515 tip, and I could not find the max tip size but I suspect this is it — .015 — which is a big orifice and can handle almost all latex or oil based paints but I would not use oil base in a sprayer because of clean up. Much easier to run water through it for clean up than mineral spirits. I am currently painting my deck and I’m using Sherwin-Williams Super Deck product which is thicker than normal paint, and I’m using a .015 spray tip. I’m using a 315 on the railings to limit overspray and conserve paint. The 315 will give me a 6” spray pattern and the .015 is within the manufactures specifications for this product. I could have used a .017 but it would have put out a lot more paint and made it a little more difficult to control overspray and conserve paint. I hope that helps. This is a great sprayer at a very good price, but follow the directions and make sure you clean it properly and use pump armor when stored. |
Question: | Will it make Sharpies run if you use it over them on a hard/non porous surface |
Answer: | In my yes. |
Question: | Will this work on a porous surface like a painted coconut bicycle cup holder |
Answer: | Probably not. |
Question: | Will this work to water prof terra cotta pots |
Answer: | Why would you want to waterproof terra cotta pots. They were made to breath. |
Question: | How is the viscocity out of the can, is it more like warm syrup or more like water...or somewhere in between? Thank you |
Answer: | Maybe Slightly Thinner than warm Syrup, So probably between Warm Syrup & Water. A word of advice though, I had an extremely difficult time working with this product & had to sand and reapply many coats to get a satisfactory finish. It dries fast & if you run a brush over it after is has sat more than a minute it will create rough brush marks. Additionally if you apply more than a very thin layer it will crack similar to a crackle pattern. Unless you are putting this over a pure white background I would recommend that you use the standard "Crystal Clear" non-water based urethane. It has only a light yellow tint and is much easier to work with in my experience. |
Product features
Helmsman Spar Urethane is specially formulated as a protective clear finish for exterior or interior wood exposed to sunlight,water,or temperature changes.
- Contains UV blockers to reduce the sun's graying and fading effects.
- Forms a protective barrier against rain and moisture.
- Special oils allow the finish to expand and contract with the wood as seasons and temperatures change.
- Ideal for use on doors, windows, trim, bathroom cabinets, bar tops, kitchen countertops, outdoor furniture.
Give new life to tired-looking garage door
With all the angled panels of modern garage doors, spraying is quicker and easier than brushing or rolling. It's really the best way to get a professional, smooth, even finish.
Easily bring new life to your deck
Simply applying a new coat of finish to your deck can make all the difference in the appearance of your entire home. And using a Graco sprayer makes it easier and faster.
Paint your fence in a breeze
Staining or painting your fence will help preserve and protect it from the sun and weather while improving your home’s overall curb appeal.
Quickly paint your house faster and easier with a quality finish
Update the look of your house with a fresh coat of paint. Graco sprayers are easy to use and you’ll finish in a fraction of the time it takes to paint with a traditional roller or brush.
Latest Reviews
View all
Kids Workbench
- Updated: 30.06.2021
- Read reviews

Mask For Kids Anti Virus
- Updated: 02.05.2021
- Read reviews

Non Pull Harness
- Updated: 25.06.2021
- Read reviews

Tactical Bipods For Air Rifles
- Updated: 21.01.2021
- Read reviews

New Derma Roller For Faces
- Updated: 01.02.2021
- Read reviews