13 best fuji hvlp sprayer

Product description

The Mini-Mite 3 PLATINUM system includes the Fuji T-Series Spray Gun. Fuji installs the same powerful 3-stage turbine motor as used in Q3 Models. The MM3 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM3 PLATINUM Turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The T-70 Spray Gun is Non-Bleed and features a side-mounted Pattern Control Knob (to adjust the size of the fan pattern) and 1 Quart cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 3 PLATINUM Turbine, 25ft Hi-Flex hose, T-70 Non-Bleed Spray Gun, viscosity cup, cleaning brush, wrench and 20 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Box Fuji Spray has designed a unique method of removing any heat build-up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box located at the rear of the case. Fuji Spray Noise Reduction Covers The Mini-Mite PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

From the Manufacturer

The Mini-Mite 3 PLATINUM system includes the Fuji T-Series Spray Gun. Fuji installs the same powerful 3-stage turbine motor as used in Q3 Models. The MM3 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM3 PLATINUM Turbine develops approximately 6psi. This is more than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The T-70 Spray Gun is Non-Bleed and features a side-mounted Pattern Control Knob (to adjust the size of the fan pattern) and 1 Quart cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 3 PLATINUM Turbine, 25ft Hi-Flex hose, T-70 Non-Bleed Spray Gun, viscosity cup, cleaning brush, wrench and 20 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Box Fuji Spray has designed a unique method of removing any heat build-up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box located at the rear of the case. Fuji Spray Noise Reduction Covers The Mini-Mite PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

• Professional Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large
• Non-bleed lightweight Spray Gun with Ergonomic Stay-Cool handle
• PLATINUM Turbine featuring The Heat Dissipation Box
• Featuring with all Mini-Mite PLATINUM models are Fuji's Noise Reduction Covers
• Portable and easy to transport

User questions & answers

Question:	Where was it made
Answer:	Fuji Spray systems are made in Canada.
Question:	How much better is this unit than the Semi-Pro 2...about 200-300 less.? Thanks
Answer:	I was going to buy the Semi-pro 2 but jumped to the Mini-mite 3 because it comes with the T series gun, same as Fuji's high-end sprayers, while the Semi-pro 2 comes with their M series gun. I've never used the Semi-pro 2, but I'm getting fantastic results from the 3 and I think the additional power and the better gun were worth the extra money.
Question:	My gun is shot. the turbine is fine. can i buy just a replacement gun or is it covered under warranty? i purchased my unit oct
Answer:	Check with the manufacturer on Warranty, yes you can buy a new gun, and yes you can buy a rebuild kit for your gun. Scott at VMTW
Question:	Is it a special delivery
Answer:	My system was not a special delivery. it did not require a signature.

Product features

Mini-Mite 3 PLATINUM Turbine

Lightweight and portable 3-stage motor with a 6.5 psi output, suitable for spraying waterborne and solvent-based coatings on fine-finish projects, including cabinets, furniture, or pianos.

Rugged metal case designed with Heat Dissipation Chamber and quick change friction-fit filters that extend the life of the motor inside the turbine.

Noise Reduction Covers muffle the operating noise levels.

Hi-Flex 25ft Hose

Includes a kink free spring to prevent bending and kinking at the turbine connection.

Not only flexible at different temperatures, it will stay flexible for years to come.

Includes a quick-connect coupling for easy attachment to the spray gun, as well as an air

control valve to regulate the pressure.

T70 Spray Gun

The T-Model HVLP turbine spray gun was designed to meet the rising demand for a spray gun that offers the ultimate in flexibility and control.

Non-bleeder gun allows air to pass through the spray gun only when the trigger is engaged.

The benefits of a non-bleed spray gun include:

• Less disturbance of shop dust and negligible turbulence in the spray area.

• Less paint buildup on the tip of the fluid nozzle.

Product description

To meet the growing demand of the DIY market, Fuji Spray has introduced the most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 Gravity model offers features like no other in its price range. The Fuji M-Model Spray Gun has professional features such as non-bleed and a Fan Control Knob to adjust pattern size from small circular to wide (and all increments in between). A super-powerful 1400 watt 2-stage bypass motor in a metal turbine case with handy gun holder. HVLP Systems typically feature low wattage motors that are underpowered for most spraying. Our 2-stage version can handle any type of coating. The Semi-PRO 2 Gravity model is for the serious user. This unit is for North American 120V plug only. For 220V capacity, please contact Fuji Spray directly.

From the Manufacturer

To meet the growing demand of the DIY market, Fuji Spray® has introduced the most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 Gravity model offers features like no other in its price range. The Fuji M-Model Spray Gun has professional features such as non-bleed and a Fan Control Knob to adjust pattern size from small circular to wide (and all increments in between). A super-powerful 1400 watt 2-stage bypass motor in a metal turbine case with handy gun holder. HVLP Systems typically feature low wattage motors that are underpowered for most spraying. Our 2-stage version can handle any type of coating. The Semi-PRO 2 Gravity model is for the serious user.

• Professional non-bleed Spray Gun with Adjustable Pattern Fan Control
• 1.3mm Air cap set installed
• 400cc Gravity Cup. Lightweight and portable
• Metal Turbine case with handy gun holder
• 25ft Hose includes air control valve to reduce overspray and bounce back
• Quick Connect Coupling & Air Control Valve

User questions & answers

Question:	We aren't Pros,but we would appreciate any advice on what sprayer to purchase for people 70 yrs of age. Hubby will pass on to our son. Thank you very
Answer:	The Fuji Semi-pro 2 would be a very good choice. I am 72 years old and appreciate the Fuji's fairly lite weight and compact turbine. The gun and whip hose are easy for me to handle. I chose the gravity gun and appreciate its comfortable center of gravity in my hand. It is easy to manipulate around corners and tight spaces. You didn't mention the type of material you will be spraying thru the gun. The Semi-Pro gives best performance with water-borne and solvent-borne finishes. It isn't really made for heavier finishes including latex and other paints. I have been very pleased with the nice buttery finish the Semi-Pro applies. I hope this helps with your decision. Good luck.Larry King
Question:	Where will I be able to purchase other needles and caps when needed
Answer:	Search "Fuji 7020". It will come up with 6 cap/needle sets
Question:	does this unit create any over spray compared to hvlp gravity feed gun used with a air compressor
Answer:	There's relatively NO overspray! I've been using an hvlp gun with and air comp. for years, over spray everywhere!! I had to cover the whole work area! But with the Fuji it's great, (I finish and paint cabinets for a living) all I had to cover is about two feet of the wall and floor and spray and in the next room my customer is reading the paper, with no disturbance of over spray. WOW!! I love Fuji!!
Question:	Can you spray automotive acrylic and urethane based paints
Answer:	When spraying automotive finishes, we would recommend use of a 4 or 5-stage system to provide the power necessary to atomize high viscosity primers and allow for optimal atomization.

Product features

For the hobbyist or weekend warrior seeking professional results

The Fuji Spray Semi-PRO 2 Model is ideal for spraying furniture pieces, cabinets, walls, ceilings, doors, fences, shutters, etc.

The most powerful 2-Stage Spray System in the market

For the weekend warrior, start-up business, serious hobbyist and small shop; the Semi-PRO 2 Spray System offers the perfect combination of versatility and performance to lay down that professional-looking finish.

Semi-PRO 2 Spray System comes with the M-Model Spray Gun

The Semi-PRO systems include the Fuji M·Model spray gun, which has professional features such as non-bleed and a Dedicated Fan Control to adjust pattern size from small circular to wide (and all increments in between).

Key Benefits

- Disassembles easily for quick clean-up and maintenance.

- Multiple air cap sizes allow for spraying of various materials in different viscosity levels from stains to latex paints to bath tub coatings, with little dilution.

- Stainless steel fluid passages prevent wear on the needle tip. Ideal for waterborne and solvent-based coatings.

- Dedicated Fan Pattern Control - delivers precision application with less waste. Allows for vertical, horizontal or circular applications, and can easily adjust from 1" circular to 12" oval pattern.

7001 Bottom Feed M-Model Spray Gun

- 1 Quart bottom feed cup capacity.

- Ergonomic Stay Cool handle.

- Standard 1.3mm air cap set installed - for spraying medium to thin materials.

- Dedicated Fan Pattern Control.

7002G Gravity Feed M-Model Spray Gun

- 400cc gravity feed feed cup capacity.

- Ergonomic Stay Cool handle.

- Standard 1.3mm air cap set installed - for spraying medium to thin materials.

- Dedicated Fan Pattern Control.

Did you know... The M-Model spray gun is convertible?

The M-Model spray gun can be converted from a bottom feed cup to a gravity feed cup and vise versa, making all types of jobs easier to accomplish.

To convert to gravity from bottom feed, see part # 9960 - U-Tube 400cc Gravity Cup Conversion Kit.

To convert to bottom from gravity feed, see part # 2042 - 1 Quart Cup Assembly.

Product description

To meet the growing demand of the DIY market, Fuji Spray has introduced the most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 HVLP Spray System offers features like no other in its price range. The Fuji M-Model Spray Gun has professional features such as non-bleed and a Fan Control Knob to adjust pattern size from small circular to wide (and all increments in between). A super-powerful 1400 watt 2-stage bypass motor in a metal turbine case with handy gun holder. HVLP Systems typically feature low wattage motors that are underpowered for most spraying. Our 2-stage version can handle any type of coating. The Semi-PRO 2 is for the serious user. Lightweight and portable

From the Manufacturer

To meet the growing demand of the DIY market, Fuji Spray® has introduced the most powerful 2-stage system on the market. The Fuji Spray Semi-PRO 2 HVLP Spray System offers features like no other in its price range. The Fuji M-Model Spray Gun has professional features such as non-bleed and a Fan Control Knob to adjust pattern size from small circular to wide (and all increments in between). A super-powerful 1400 watt 2-stage bypass motor in a metal turbine case with handy gun holder. HVLP Systems typically feature low wattage motors that are underpowered for most spraying. Our 2-stage version can handle any type of coating. The Semi-PRO 2 is for the serious user.

• Professional non-bleed Spray Gun with Adjustable Pattern Fan Control
• 1 3mm Air cap set installed
• 1Qt Bottom Feed Cup
• Metal Turbine case with handy gun holder
• 25ft Hose includes air control valve to reduce overspray and bounce back

User questions & answers

Question:	Is there a lot of over spray, could you spray in a finished house
Answer:	There is not a 'lot' of overspray, but there is always going to be some. I haven't used other types of sprayers (airless or compressor type) but I suspect they are much worse in this regard. You can spray in a finished house (I did) but you still want to mask and protect the surrounding area .
Question:	Is the spray gun a bleeder or non-bleeder type gun
Answer:	This gun is a non-bleeder, which I prefer. You can pull back the trigger slightly to get some "dust off" air stream, however.
Question:	but
Answer:	Sure
Question:	Will this spray latex paints
Answer:	pick up a small, cheap air brush compressor and pressurize the cup using 1/4” vinyl tubing. Shazam youre atomizing ANYTHING. Manufactures used to make these units, but they found it it was much harder to make your own turbine unit without the special 6 stage units they told you need. The ones they had made specially made and price protected by the vacuum motor. I’ve painted my entire life and now own my own Ben Moore paint store. These 4, 5 and 6 stage units are new the past few, five years give or take, turbines have been around for decades, so you figure it out. If you’re still not sure you should probably listen to the ones trying to sell you something. good call!

Product features

For the hobbyist or weekend warrior seeking professional results

The Fuji Spray Semi-PRO 2 Model is ideal for spraying furniture pieces, cabinets, walls, ceilings, doors, fences, shutters, etc.

The most powerful 2-Stage Spray System in the market

For the weekend warrior, start-up business, serious hobbyist and small shop; the Semi-PRO 2 Spray System offers the perfect combination of versatility and performance to lay down that professional-looking finish.

Semi-PRO 2 Spray System comes with the M-Model Spray Gun

The Semi-PRO systems include the Fuji M·Model spray gun, which has professional features such as non-bleed and a Dedicated Fan Control to adjust pattern size from small circular to wide (and all increments in between).

Key Benefits

- Disassembles easily for quick clean-up and maintenance.

- Multiple air cap sizes allow for spraying of various materials in different viscosity levels from stains to latex paints to bath tub coatings, with little dilution.

- Stainless steel fluid passages prevent wear on the needle tip. Ideal for waterborne and solvent-based coatings.

- Dedicated Fan Pattern Control - delivers precision application with less waste. Allows for vertical, horizontal or circular applications, and can easily adjust from 1" circular to 12" oval pattern.

7001 Bottom Feed M-Model Spray Gun

- 1 Quart bottom feed cup capacity.

- Ergonomic Stay Cool handle.

- Standard 1.3mm air cap set installed - for spraying medium to thin materials.

- Dedicated Fan Pattern Control.

7002G Gravity Feed M-Model Spray Gun

- 400cc gravity feed feed cup capacity.

- Ergonomic Stay Cool handle.

- Standard 1.3mm air cap set installed - for spraying medium to thin materials.

- Dedicated Fan Pattern Control.

Did you know... The M-Model spray gun is convertible?

The M-Model spray gun can be converted from a bottom feed cup to a gravity feed cup and vise versa, making all types of jobs easier to accomplish.

To convert to gravity from bottom feed, see part # 9960 - U-Tube 400cc Gravity Cup Conversion Kit.

To convert to bottom from gravity feed, see part # 2042 - 1 Quart Cup Assembly.

Product description

The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. 1 Quart Bottom Feed Cup is installed – this is the ideal size for medium to large sized projects such as cabinets and furniture. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control.

From the Manufacturer

The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. 1 Quart Bottom Feed Cup is installed – this is the ideal size for medium to large sized projects such as cabinets and furniture. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control.

• Professional Spray Gun features convenient side pattern control knob to adjust size of fan pattern from small to large
• Non-Bleed Spray Gun for less blowing around of shop dust
• New sleek lightweight design
• High-Efficiency Air cap installed for even less overspray and superb atomization
• 100% stainless steel fluid components, ergonomic stay cool handle

User questions & answers

Question:	Will this work with a 3 stage turbinaire unit? 5 psi max
Answer:	I supose you very well could, wouldn't recommend since there's 8 individual 26AMW wires in the cat after you peel the jacket off and not worth the effort and time imo
Question:	Where do you get replacement strainers for this thing? i think it’s fuji spray part number 9044 but i cannot find anyone who sells them
Answer:	first strip the wire end ,then loosen all wheels ,put in wire, adjust bottom wheel, then adjust side wheels .try to adjust wheels so there is the least gap ..once you master this .this item works wonderful ,I have stripped tons of wires with no problem
Question:	Can you use the 3m cps system
Answer:	I have found when the wire is so small, it just does not pay to spend the time to strip it. But if you want to do it cut the lengths shorter then with larger diameter to guide it through the rollers more easily. Go slower!!!
Question:	Is the canister on this gun pressurized or just siphon? They picture doesn't show a second tube going to the back of the gun, like the gravity one
Answer:	Dear Customer,Thank you for contacting us. To answer your question, this will work for the wires you are trying to strip.Thanks

Product description

The Mini-Mite 4 PLATINUM (MM4) system includes all the same features as the Mini-Mite 3 PLATINUM but with the use of a stronger 4-stage motor turbine. The MM4 PLATINUM includes the Fuji T-70 Spray Gun that features a pattern control knob to adjust the fan size from small to large. Fuji installs the same powerful 4-stage turbine motor as used in the Q4 Models. The MM4 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM4 PLATINUM Turbine develops approximately 8.5psi. This allows for less thinning of paints than any 3-stage model. More than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The Spray Gun included with this package is the Fuji T-70 with 1 Quart cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 4 PLATINUM Turbine, 25ft Hi-Flex hose, T-70 Non-bleed Spray Gun with 1 Quart cup, viscosity cup, cleaning brush, wrench and 20 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Box Fuji Spray has designed a unique method of removing any heat build-up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box located at the rear of the case. Fuji Spray Noise Reduction Covers The Mini-Mite PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

From the Manufacturer

The Mini-Mite 4 PLATINUM (MM4) system includes all the same features as the Mini-Mite 3 PLATINUM but with the use of a stronger 4-stage motor turbine. The MM4 PLATINUM includes the Fuji T-70 Spray Gun that features a pattern control knob to adjust the fan size from small to large. Fuji installs the same powerful 4-stage turbine motor as used in the Q4 Models. The MM4 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM4 PLATINUM Turbine develops approximately 8.5psi. This allows for less thinning of paints than any 3-stage model. More than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The Spray Gun included with this package is the Fuji T-70 with 1 Quart cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 4 PLATINUM Turbine, 25ft Hi-Flex hose, T-70 Non-bleed Spray Gun with 1 Quart cup, viscosity cup, cleaning brush, wrench and 20 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Box Fuji Spray has designed a unique method of removing any heat build-up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box located at the rear of the case. Fuji Spray Noise Reduction Covers The Mini-Mite PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

• Professional Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large
• Non-bleed lightweight Spray Gun with Ergonomic Stay-Cool handle
• PLATINUM Turbine featuring The Heat Dissipation Box
• Featuring with all Mini-Mite PLATINUM models are Fuji's Noise Reduction Covers
• Portable and easy to transport

User questions & answers

Question:	Can this bottom feed gun be converted to gravity feed
Answer:	The T-70 can be converted into a gravity feed spray gun using the #9960 U-Tube Conversion Kit. Since the U-tube is meant for the Fuji Spray M-model spray gun, teflon tape may be required around the couplings to avoid leaks.
Question:	What makes this system $400 better than the Fuji 2002 or 2003 systems
Answer:	I purchased a Mini Mite 4 and it is not priced At $ 400.00--- $766.00 on Amazon. Reviews on line indicated the Mini Mite 4 capable of spraying heavier paints with better results. That is the reason I purchased----and am happy with the results.
Question:	Would this work for house painting
Answer:	It would if you had the right needle/cap/knozzle and thinned your paint
Question:	Can i spray latex enamel on trim in place without masking everything
Answer:	No, not with the gun that is supplied. I don't think you could fan down the spray enough to avoid over spray. I think there is a "detail" type gun that you can get for system that might work for trim that's in place. You'd probably still have to do some taping??? Sorry

Product features

The Mini-Mite PLATINUM Series

If you’re a professional woodworker or cabinetmaker looking for a spray system with enough power and portability for your fine-finishing projects, the Fuji Spray Mini-Mite PLATINUM Series is a must for your business. With the Mini-Mite PLATINUM Series, you can spray cabinets, furniture, autos or pianos – in fact, anything wood or metal! Exclusive to Fuji Spray – The Fuji Spray Heat Dissipation Chamber Fuji Spray has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation Chamber located at the rear of the case. Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris. The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.

What Makes This Series Different

• Lightweight and portable
• Powerful and versatile – regardless of the motor stage
• Simple fan pattern adjustment from circular to wide at your fingertips
• Three fan pattern orientations – horizontal, vertical, circle
• A quieter overall spray experience compared to previous models
• Can be used with a range of materials (high to low viscosity)
• Suitable for both waterborne and solvent-based coatings
• Easy to disassemble spray gun resulting in hassle-free clean up and maintenance

Key Features of this Series

• Heat Dissipation Chamber – dissipates heat resulting in increased turbine motor life
• Noise Reduction Covers – muffles the operating level by removing direct sound paths
• PSI ranging from 6.5 to 9.5
• Rugged metal turbine case
• Quick-change friction fit filters

Product description

The Q5 PLATINUM is the most powerful Fuji Spray system. This 5-stage turbine motor develops approximately 9 5 psi. The additional power allows the user to apply their finish faster and with less time spent on preparation of materials. Incorporated into its design is a proprietary Heat Dissipation Chamber (HDC). The HDC expels excess heat from the turbine, resulting in much cooler operating temperatures. Less heat translates to longer motor life for your turbine. Supplied with the Fuji T-70 non-bleed spray gun with pattern control knob - the fan size is adjustable from small to large, and everything in between (fully incremental). The benefit of non-bleed is that air only passes through the spray gun when the trigger is pulled, resulting in less blowing around of shop dust and less paint buildup on the tip of the fluid nozzle. Obtain a professional finish with all known coatings. The Fuji T-70 is also equipped with a 1Qt bottom feed cup. The standard air cap set is the general purpose #3 (1 3mm) for fine finishing with lacquers, enamels, polyurethanes, latex, water based coatings and more. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with gun holder. Portable and powerful. Complete system includes the Q5 PLATINUM turbine, T-Model spray gun with 1Qt cup, 25ft hose with quick-connect, air control valve, user manual, viscosity cup, wrench, cleaning brush and the 5-for-5 bonus kit; consisting of a 6' whip hose, wet film gauge, 19-pc spray gun cleaning & maintenance kit with lubricant, extra turbine filter and "Always Measure" booklet - record your material preparation and results. This unit is for North American 120V plug only. For 220V capacity please contact Fuji Spray directly.

• 5-Stage Turbine produces 9 5psi featuring Variable Speed Control Dial allows user to adjust motor speed
• Quiet turbine - Patented noise reduction feature + Heat Dissipation Chamber (HDC)
• Professional Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large
• 25ft hose includes air control valve to reduce overspray and bounce back
• Includes the 5-for-5 Bonus Kit

User questions & answers

Question:	How water proof is the machine? Would it survive getting caught in a rain shower
Answer:	Although I haven’t been caught in a rainstorm yet, It seems really well sealed. If you get caught in a rainstorm I would just lean a small piece of plywood up against it because she’ll the water it’s a great sprayer!
Question:	Have ordered a Q5 and waiting for delivery. Wanting to purchase an overspray sleeve. What is the widest diameter of the hose/connectors
Answer:	Hoses use standard 3/4" garden hose thread fittings.
Question:	The Q5 pits out 9.5 psi, but the mini mite 4 puts out 9 psi. Is the .5 psi difference (and noise reduction) really worth the $574 difference
Answer:	Although the difference in psi is slight, it still allows for superior atomization, and faster application speed. Note that the Q5 is equipped with a variable speed control knob on the turbine to adjust air flow with greater accuracy; the Q4 is not equipped with this feature. Lastly, keep in mind that all Fuji Spray 5-stage systems are equipped with the bonus 5-for-5 accessory package which includes popular accessories such as a whip hose, a cleaning kit, and spare filter(s) to name a few.
Question:	How much 110V wattage is required to power it
Answer:	Mine is hooked up to a 20 amp circuit

Product features

The Q PLATINUM Series

The Fuji Spray Q PLATINUM Series is for those who simply want the best spray experience. The Q PLATINUM Series is the ultimate tool in terms of power and control allowing you to focus on what really matters – the quality of your work. The patented noise reduction technology coupled with the unique Heat Dissipation Chamber makes the Q-Series stand out in the industry. The Q PLATINUM Series Systems are perfect for fine-finishing of cabinets, furniture, as well as medium to heavy painting projects.

Exclusive to Fuji Spray –The Fuji Spray Heat Dissipation Chamber Fuji Spray has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation Chamber located at the rear of the case. Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris. The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.

What Makes This Series Different

• “Q” is for quiet – the quietest operating turbine on the market
• Powerful and versatile – regardless of the motor stage
• Convenient fan pattern adjustment at your finger tips
• Three fan pattern orientations horizontal, vertical, circle
• Can be used with a range of materials (high to low viscosity)
• Suitable for waterborne and solvent-based coatings
• Easy to disassemble spray gun resulting in hassle-free clean up and maintenance

Key Features of this Series

• Heat Dissipation Chamber
• PSI ranging from 6.5 to 9.5
• Rugged metal turbine case
• Quick-change friction fit filter
• Non-bleed turbine spray gun – choice of 3 different HVLP turbine spray guns (T70, T75G, G-XPC)
• Stainless steel needle, nozzle, and fluid passages
• High transfer efficiency

Product description

The Q5 PLATINUM is the most powerful Fuji Spray system. This 5-stage turbine motor develops approximately 9 5 psi. The additional power allows the user to apply their finish faster, and with less time spent on preparation of materials. Incorporated into its design, is a proprietary Heat Dissipation Chamber (HDC). The HDC expels excess heat from the turbine, resulting in much cooler operating temperatures. Less heat translates to longer motor life for your turbine. Supplied with the Fuji T-75G non-bleed spray gun with pattern control knob - the fan size is adjustable from small to large, and everything in between (fully incremental). The benefit of non-bleed is that air only passes through the spray gun when the trigger is pulled, resulting in less blowing around of shop dust and less paint buildup on the tip of the fluid nozzle. Obtain a professional finish with all known coatings. The Fuji T-75G is also equipped with 600cc gravity cup. The standard air cap set is the general purpose #3 (1 3mm), for fine finishing with lacquers, enamels, polyurethanes, latex, water-based coatings, and more. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with gun holder. Portable and powerful. Complete system includes the Q5 PLATINUM turbine, T-Model spray gun with 600cc cup, 25ft Hose with quick-connect, air control valve, user manual, viscosity cup, wrench, cleaning brush, and the 5-for-5 bonus kit which consists of a 6' whip hose, wet film gauge, 19-pc spray gun cleaning & maintenance kit with lubricant, extra turbine filter, and "Always Measure" booklet - record your material preparation and results. This unit is for North American 120V plug only. For 220V capacity please contact Fuji Spray directly.

• The extra power allows for less thinning of viscous paints and achieves finer atomization5-Stage Turbine produces 9 5psi featuring Variable Speed Control Dial allows user to adjust motor speed
• Quiet turbine - Patented noise reduction feature + Heat Dissipation Chamber (HDC)
• Professional Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large
• 25ft hose includes air control valve to reduce overspray and bounce back
• Includes the 5-for-5 Bonus Kit

User questions & answers

Question:	Can this gun be used to paint a car
Answer:	Yes i paint cars daily with them
Question:	I am planning to use it for professional use, is there a service place in the northeastern when need it
Answer:	For a full listing of Fuji Spray service centers in the North Eastern USA, kindly go to www.fujispray.com/where-to-buy and look under the "Authorized USA Fuji Spray® Service Distributors" heading. For further information, you can contact us at 1-800-650-0930.
Question:	Is this capable of spraying urethane paints and clears with a show finish? And is it able to spray water based paints and clears
Answer:	I paid a lot for this product and didn't work correctly, I had to throw in the garbage ðŸ~ ðŸ~¡
Question:	does this come with multiple guns
Answer:	This system comes with one gun only. This T75G spray gun produces some excellent results.

Product description

The Hobby-PRO 2 is the perfect HVLP Spray System for the serious Hobbyist. This system includes the Fuji M-Model non-bleed spray gun which has all professional features including a rear pattern control knob to adjust the fan size from small to large. The size of the bottom feed cup is 1 quart. Fuji installs a super powerful 2-stage motor which provides enough power to spray all known coatings (when properly thinned). This Turbine develops approximately 5psi. The Hobby-PRO 2 is offered with a larger size tip (1.8mm) which is ideal for thicker viscosity paint such as latex or larger surface area projects such as fences and decks. Easy to maintain. Perfect for the Hobbyist or DIYer. Heavy-duty metal case. Handy gun holder. Portable and powerful. Even though the Hobby PRO 2 was designed with the weekend warrior in mind, this machine performs as good as any other and is offered at an unbeatable price. Durable metal turbine case sits on 4-Feet rubber. Modular power cord, viscosity cup, cleaning brush, and 20 page user manual included. In addition to this we have also included a pair of filters and a Bottom Feed Cup Parts Kit.

• Extra Turbine Filters and Extra Bottom Feed Cup Parts Kit INCLUDED with this system
• Professional Non-bleed Spray Gun features pattern control knob to adjust size of fan pattern from small to large
• Spray Gun has stainless steel fluid nozzle and needle. Ergonomic handle is insulated and never gets hot
• 25-Feet hose includes air control valve to reduce overspray and bounce back
• Handy Gun Holder on Turbine

User questions & answers

Question:	When spraying inside jobs how much overspray do you get
Answer:	The Hobby-PRO 2 HVLP spray system allows for adjustment of the air to fluid stream that reduces overspray bounce-back to an absolute minimum.
Question:	does this come with a black whip like shown in the picture? will the hose fit my mini mite
Answer:	It does not come with a whip. As I don't own a 'mini mite' I can't say if it would fit.
Question:	Can I use this system for automotive paint
Answer:	If operating on a tighter budget, a Hobby-Pro 2 will provide adequate results. When using an HVLP turbine-driven spray system to apply automotive finishes, Fuji Spray would recommend either a 4 or 5 stage system for best results. These systems can spray all automotive applications, including 2K paints, and will ensure optimal atomization and the highest quality of finish are achieved. Historically, the below air cap sets have proven to work best with automotive finishes: • 1.5mm-1.8mm for primer application • 1.3mm for base coat • 0.8mm-1.0mm for clear coat
Question:	Is there any difference between this and Semi-Pro other than color and needle size? What are differences between 1.8, 1.5, 1.3 and 1.0 needles
Answer:	I'm not sure what the difference is between this and the semi pro. You should check the specs. The different needles are for spraying materials with different viscosity. ie. Latex paint, laquer...

Product features

The DIY-PRO Series

To meet the growing demand of the DIY market, Fuji Spray has introduced the DIY-PRO Series, which has the most powerful 2-stage systems on the market: The Fuji Spray Hobby-PRO 2 and the Fuji Spray Semi-PRO 2.

Whether you’re a weekend warrior or a professional hobbyist, the DIY-PRO Series offers you the perfect combination of versatility and performance to get the job done. Considered the ‘go-to’ system for both workshops and home use, the DIY-PRO Series is ideal for spraying walls, ceilings, doors, fences, shutters, cabinets, and so much more! The DIY-PRO Series will allow you to obtain an outstanding finish, making you look like a professional.

Most HVLP systems typically feature low wattage motors that are underpowered for most spraying. Our 1400 watt 2-stage bypass motor in a metal turbine casing can handle almost any type of coating.

What Makes This Series Different

• Entry level system offering professional grade results
• Budget friendly
• Easily change the fan pattern from wide to narrow
• Faster application than a roller or brush
• Save money on finish-low overspray = less material used
• Easy to disassemble spray gun results in hassle-free clean up and maintenance
• Lightweight and portable

Key Features of this Series

• 400cc gravity or 1Qt (1000cc) bottom feed cup capacity
• Convertible spray gun from bottom to gravity and vice-versa
• Six different air cap set sizes available
• Stainless steel needle, nozzle, and fluid passages
• Powerful 1400 watt 2-stage motor
• 25ft Hi-Flex hose
• Rugged metal turbine case

Product description

The Fuji industrial spray equipment flexible whip hose measures 6 feet long and can be used with any make of HVLP turbine and spray gun. This lightweight and durable hose is designed to take the weight off your wrist for more comfortable use, and the highly bendable construction gives you easy and versatile spray gun maneuverability. The generous length of the hose helps reduce the heat through the gun from the turbine, making it especially advantageous when used with fast-drying lacquers and latex.

The Fuji industrial spray equipment flexible whip hose measures 6 feet long and can be used with any make of HVLP turbine and spray gun. This lightweight and durable hose is designed to take weight off your wrist for more comfortable use, and the highly bendable construction gives you easy and versatile spray gun maneuverability. The generous length of the hose helps reduce the heat through the gun from the turbine, making it especially advantageous when used with fast-drying lacquers and latex.

• Industrial spray flexible whip hose for use with any make of HVLP turbine and spray gun
• Highly flexible for easy spray gun maneuverability
• Lightweight and durable construction; designed to take weight off wrist
• Helps reduce heat for optimal use with fast-drying lacquers and latex
• Measures 6 feet long

User questions & answers

Question:	Would this work with wagner
Answer:	So I painted my kitchen cabinets last year with it. I never used a HVLP sprayer before. I did not spray over my old cabinets. I build new doors from Maple stock sander them down to 320 grit before I started painting. I thought that the best paint to use would be a oil base paint. So this is what I bought and realizing that I would have to thin it with paint thinner (not more then 10%). First I primed them with an oil base primer then started to use the finish coat. So it didn't go so well at first you have to figure out the volume of paint to allow to flow from the gun. I found with the oil base paint that 1 1/2 turns open from closed or 1 1/4 turns worked best. You spray one direction and then the other direction. I would paint them, let them dry over night and lightly sand them with 320 grit. This gets rid of any imperfections in the finish. Then apply another coat and followed this process for 4 coats. I ended up with an almost perfect finish. But that is not good enough. See now that you have this perfect finish anytime you scratch your finger nail against the paint it leaves a mark. So to solve this I applied a clear poly coat from Minwax. Sprayed it with the paint flow valve only 1 turn open since it is so thin and can be sprayed without thinning. Same process as with the paint but sand with 400 grit instead, Applied 4 coats and my doors are scratch free and easy to clean. I painted the outside of the cabinets with a latex paint and brush. Since you don't see much of them it makes little difference to use a sprayer. I have since become very good with this sprayer and do many projects with it now with confidence. If you use a latex paint I find that Sherwin Williams works better then Bear and you have to thin Latex paint since it is much thicker then oil. Oil paint is just a pain to clean up and it smells so you can't use it inside. When you are ready to paint setup a small spray booth in the garage or outside, make a turntable if you can so you move the work and not your position. You have to make sure you keep as much dust out as possible. Wet the sides of the paint booth and the floor. I used my garage and also put plastic up on the outside of the doors to keep as many insects as possible out. I had to refinish several doors do to small a insect getting stuck on the paint. My brother in-law told me that there is a paint you can use with a brush that flows at the right rate and dries with a tile look. I did see these online for $100 gallon. Oh I used a 1.5 needle in the sprayer. Good luck it is fun to spray once you master it.
Question:	Will this work on a titan capspray hvlp sprayer
Answer:	Thanks. Here's what I found out - they have a major distribution deal with Wagner. The cap & needle sets are readily available. The needle only parts are coming soon. You can order direct from the 800 number in the manual. The sets are $49, and I didn't learn the needle only price. They'll all be available through Home Depot and channel sales this year.
Question:	Will this work on earlex 6003 ? Tks
Answer:	I have only used this for refinishing cabinets and furniture. Have to be careful tho, sometimes it spirts.
Question:	Can I connect this directly to the turbine? I already have one, an done more would give me plenty of hose
Answer:	Hola! It does come with a brush, a wrench, a viscosity funnel and the users manual. There is only one needle included. Besides that, it is just the spray gun, and the turbine unit. There is a very nice "you tube" video that I watched before deciding on this unit. (Earlex HV5500 spray station Pro HVLP system product tour By Highland. woodworking). Hope it helps!

Product description

The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. Installed with a 600cc Cup – this is the ideal size for small to medium sized projects. Four different sizes of gravity cups available. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control.

From the Manufacturer

The Fuji Spray T-Series Spray Gun features a side Pattern Control Knob to adjust the size of the fan from small to large and any size in between. The Pattern Control Knob allows you to adjust to the exact size of the object you are spraying. The newly designed lightweight T-Series with Easy Pull Trigger means less fatigue for the operator. Other desirable features include 100% Stainless Steel fluid components, Stainless Springs, Metal Knobs, Rear Rotating Nipple for pressure tubes, Ergonomic Stay-Cool Handle. Installed with a 600cc Cup – this is the ideal size for small to medium sized projects. Four different sizes of gravity cups available. 1.3mm Aircap Set #3 is installed – perfect size for most fine-finishing. The T-Series delivers superb atomization and ultimate control.

• Professional Spray Gun features convenient side pattern control knob to adjust size of fan pattern from small to large
• Non-Bleed Spray Gun for less blowing around of shop dust
• New sleek lightweight design.Stay-cool nylon handle (fitted over a metal tube)
• High-Efficiency Air cap installed for even less overspray and superb atomization
• 100% stainless steel fluid components, ergonomic stay cool handle

User questions & answers

Question:	Is this gun good for auto base paint and clear coat
Answer:	Yes. The E5011 spray gun is a bleeder gun and bleeds the air. If using a non-bleeder gun, the Turbine has a built-in air relief valve which bleeds the air.
Question:	will this gun work with minimite 3 turbine
Answer:	Not sure there is one. Standard feed relies on a tube into the reservoir and as long as there is finish in the reservoir and the tube is in the liquid there is no issue. We the gravity feed, you don’t have the tube so you don’t have to clean it.
Question:	can i use this with my Q3 turbine
Answer:	We recommend the ECO-5 for the noted automotive paints with the 7500-GTO spray gun only set up with a 0.8mm nozzle/needle and B-HS air cap. Additional possible modifications to achieve good results: Always use the slow temperature solvent, and additional thinning of the clear coat product may be necessary to achieve desired results. Performance will vary with different coating brands. This system is designed for personal use and not to a professional auto body shop where the Apollo POWER-5, PRECISION-5 or the TURBOPRO Automotive Series Systems should be used. Get more information at Advanced Machinery Apollo.
Question:	What is the reason to choose gravity feed over standard
Answer:	This HVLP turbine system comes with an excellent non-bleeder style gun, but you can most likely use your Titan guns with the turbine as well.

Product features

T-Model Spray Gun

Fuji Spray developed the T-Model spray gun (US patent) to meet the rising demand for a spray gun that offers ultimate flexibility and control.

The T-Model uses Canadian technology to deliver an enhanced spray pattern for exceptional performance. The new sleek design is ergonomic and well balanced. Overall, the T-Model is 20% lighter which allows for easy maneuvering and less fatigue on the operator.

The Fuji Spray T-Model spray gun also features an exclusive side-mounted Fan Pattern Control to adjust the size of the fan. This control allows you to switch from circle to wide pattern or anywhere in between. Simply turn the knob counter-clockwise for a smaller pattern and clockwise for larger. This method provides full incremental adjustment of the fan size.

All Fuji Spray T-Model spray guns are non-bleed. This means that air passes through the spray gun only when the trigger is pulled. Benefits of non-bleed include less turbulence in the spray area, less paint buildup on the tip of the fluid nozzle, and far less spray gun noise.

Product description

High 1. 8mm Air cap set for higher output. Ideal for spraying heavier materials such as latex paint. For T-Series Spray Gun only - does not fit older Fuji Spray Guns.

From the Manufacturer

High 1.8mm Air cap set for higher output. Ideal for sprayin heavier materials such as latex paint. For T-Series Spray Gun only - does not fit older Fuji Spray Guns

• This is a genuine Fuji Spray air cap set
• Ideal for larger surfaces
• High-Efficiency Air cap For T-Series Spray Guns only
• Not for use with older Fuji Spray Guns
• High Output 1. 8mm

User questions & answers

Question:	Would this fit the CapSpray Maxum II spray gun? Just curious
Answer:	I think the small knob, at the top of the trigger handle, is the flow adjustment
Question:	Will this gun spray Awlgrip or Awlcraft
Answer:	It does work
Question:	Does this fit the hobby gun
Answer:	The jet function provides a straight and yet powerful water flow. It normally reaches up to 15m far as the water pressure at 45 PSI. The jet function can be used for washing gutters, driveways or something that is too far to reac
Question:	Will this tip work with a fuji semi-pro 2? how do i know if that's a "t series" sprayer? do not want to buy a useless tip - thank you for any help
Answer:	China

Product description

Medium 1. 5mm Air cap set for medium flow. Similar to #3 but with slightly more coverage. For T-Series Spray Gun only - does not fit older Fuji Spray Guns.

From the Manufacturer

Medium 1.5mm Air cap set for medium flow. Similar to #3 but with slightly more coverage. For T-Series Spray Gun only - does not fit older Fuji Spray Guns

• This is a genuine Fuji Spray air cap set
• Great for most fine finishing applications
• High-Efficiency Air cap For T-Series Spray Guns only
• Not for use with older Fuji Spray Guns
• Medium Output 1. 5mm

User questions & answers

Question:	Will this tip work in the Mini-Mite
Answer:	Stick it in the refrigerator, then run hot water over the handle portion only. The thermal difference may create enough of a tolerance to loosen it. If not… hmmmm

Product description

The Mini-Mite 4 PLATINUM Gravity (MM4) system includes all the same features as the Mini-Mite 3 PLATINUM but with the use of a stronger 4-stage motor turbine. The MM4 PLATINUM come with the Fuji T-75G Spray Gun that features a pattern control knob to adjust the fan size from small to large. Fuji installs the same powerful 4-stage turbine motor as used in the Q4 Models. The MM4 PLATINUM does not have the patented noise-reduction feature as seen on the Fuji Q-Models, however the noise level is no more than any other standard HVLP turbine. The MM4 PLATINUM Turbine develops approximately 8.5psi. This allows for less thinning of paints than any 3-stage model. More than enough pressure to spray all known coatings (when properly thinned) and all the newer water-based coatings. The Spray Gun included with this package is the Fuji T-75G with 600cc Gravity Nylon cup. The standard Air cap set #3 (1.3mm) is for the use of general purpose fine finishing. Easy to maintain. Perfect for professional or beginner. This is an industrial-rated machine at an unbeatable price. Heavy-duty metal case with Gun Holder. Portable and powerful. The system includes the Mini-Mite 4 PLATINUM Turbine, 25ft Hi-Flex hose, T-75G Non-bleed Spray Gun with 600cc cup, viscosity cup, cleaning brush, wrench and 20 page user manual. What’s new in the Mini-Mite PLATINUM Series? The Fuji Spray Heat Dissipation Box Fuji Spray has designed a unique method of removing any heat build-up from the Turbine case. Excess heat is channeled to a Heat Dissipation Box located at the rear of the case. Fuji Spray Noise Reduction Covers The Mini-Mite PLATINUM Turbines are equipped with a method to reduce noise. The Noise Reduction Covers house the Filters.

• Professional Gravity Spray Gun features convenient side Pattern Control Knob to adjust size of fan pattern from small to large
• Non-bleed lightweight Gravity Spray Gun with Ergonomic Stay-Cool handle
• PLATINUM Turbine featuring The Heat Dissipation Box; Cup capacity ranging from 3oz (89cc) to 1Qt (1000cc)
• Featuring with all Mini-Mite PLATINUM models are Fuji's Noise Reduction Covers
• Portable and easy to transport. Suitable for both waterborne and solvent-based coatings. Can be used with a range of materials (high to low viscosity)

User questions & answers

Question:	can you use different spray guns
Answer:	The Mini-Mite 4 can be used with all other Fuji Spray turbine-driven spray guns, and most other spray guns designed for turbine use. Note however, that turbines use 3/4" hose fittings, and are not compatible with compressor spray guns that use smaller air hoses.
Question:	Does this come with an air cap set? Doesn't really specify in the item description
Answer:	Yes comes standard with a 1.3 needle/nozzle/cap set. I have all of the other sets available as well. Scott
Question:	Is this works to refinishing a tub
Answer:	Yes, this spray system can be used for bath tub and counter top resurfacing applications. Most resurfacing products are best sprayed using a 1.3mm or 1.5mm air cap set. In the event you plan to spray fleck coatings, you will require a 1.8mm air cap set.
Question:	Hello, tried clear coat and leaked thru needle and nozzle. How do you fix this?(thinned
Answer:	Refer to page 16 of the owner’s manual. If you don’t have one, you can find it online. Your packing nut is too tight, and won’t let the needle seat. You can see the packing nut between the trigger and the nozzle body. You should have the wrench that came with the system. One of the notches is for the packing nut. Back the nut off less than 1/8th of a turn and try that. If you still have a leak, back it off a tiny bit more. Test with water in the cup.Always use a little of the supplied oil (machine oil) on the needle to lubricate the packing nut. Do that every time you clean the gun. Hope this helps. Larry King

Product features

What Makes This Series Different

• Lightweight and portable
• Powerful and versatile – regardless of the motor stage
• Simple fan pattern adjustment from circular to wide at your fingertips
• Three fan pattern orientations – horizontal, vertical, circle
• A quieter overall spray experience compared to previous models
• Can be used with a range of materials (high to low viscosity)
• Suitable for both waterborne and solvent-based coatings
• Easy to disassemble spray gun resulting in hassle-free clean up and maintenance

Key Features of this Series

• Heat Dissipation Chamber – dissipates heat resulting in increased turbine motor life
• Noise Reduction Covers – muffles the operating level by removing direct sound paths
• PSI ranging from 6.5 to 9.5
• Rugged metal turbine case
• Quick-change friction fit filters

• Non-bleed turbine spray gun – choice of 3 different HVLP turbine spray guns (T70, T75G, G-XPC)
• Cup capacity ranging from 3oz (89cc) to 1Qt (1000cc)
• Stainless steel needle, nozzle, and fluid passages
• High transfer efficiency