12 best air paint sprayer

• One-piece lightweight aluminum gun body with 13.5 oz./ 0.4 l aluminum cup
• Separate and Adjustable fluid , fan pattern and air controls for precise application
• Air consumption 4.2 to 6.0 CFM @ 30 PSI
• Working pressure 44-58 PSI. Maximum pressure 60 PSI
• Fan Pattern: 5.5'' to 7.5''

User questions & answers

Question:	It is good for paint cars
Answer:	The lid will not say on, Not a good buy.
Question:	Can I replace the air valve inlet with a quick connect? And if so what size because I can’t use it currently because my compressoronly has a quick con
Answer:	Yes, you can. I did this from the minute I got it out of the box. It’s a standard 1/4” threaded opening, so any 1/4” quick connect will work
Question:	will it spray automotive base and clear coat
Answer:	Thanks so much for you questions, this gun is better for base coat , My another ASIN B07CPQDCXH is better for clear coat .
Question:	what size air compressor do i need for this gun
Answer:	We have a 90 gallon compressor tank at work multiple manifolds and outlets set to 120psi. I also purchased a regulator and attached it to the spray gun.

Product features

Before First Use

NOTICE: Before first use, clean the

Spray Gun thoroughly.



If not removed, the material used for testing and corrosion prevention will contaminate paint.

Spraying Technique

CAUTION: DO NOT STOP WHEN SPRAYING.

Spraying materials will start to set and dry.as soon as they come in contact with the air.





They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.

Paint Preparation and Filling

Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned properly.

1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.

2. Thin the paint according to manufacturer’s directions and mix thoroughly.

3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.

Product description

Gravity feed spray gun, 1.4 mm fluid tip, 20 oz canister size, 4.5 scfm at 40psi, 1.5 inch - 9.0 inch fan pattern, ideal for most automotive painting, painting furniture & painting equipment, allows for easy clean up & minimizes the waste of material left in the canister, 1 year limited warranty.

From the Manufacturer

For painting autos, equipment and furniture, this gravity-fed spray gun will produce an even coating that looks great and minimizes mess. The gravity feed canister allows for easy clean-up and minimizes the waste of material left in the canister. Polished aluminum housing is easy to clean. Tip produces 1.5- to 9-Inch fan pattern, and canister holds up to 20 ounces of paint. Paint like a pro with this gravity-fed spray gun.

• The product is gravity feed spray gun
• Easy and simple use kit
• The product is manufactured in china
• Low overspray and fin atomization; controls to adjust both fluid/air flow and spray pattern make dialing in the perfect settings easy
• 600 mL gravity feed design helps with easy clean up and minimizes the waste of material left in the canister; polished aluminum housing also allows for easy clean up
• Ideal for most automotive painting, furniture painting and equipment painting. Can be used with lacquers, basecoat/clear coat systems and polyurethane/urethane top coats
• Requires 4.0 SCFM at 40 PSI. Canister capacity holds 20 ounces
• Finish your projects faster and easier with Campbell Hausfeld - The Air Power

User questions & answers

Question:	Can i buy a replacement paint cup? A link would be great
Answer:	Yes you can buy a replacement cup. The instructions manual that comes with the paint gun has a parts list. Go to the Campbell Hausfeld web site.
Question:	Can I use it for painting interior walls? On how many psi needs my compressor to be set up
Answer:	Yes you can paint walls with this gun. But it may take a while since the canister is only 600 ml. The gun requires a compressor that can deliver 4.5 CFM at 40 PSI. The operating pressure is 45 - 50 PSI. The maximum inlet pressure is 80 PSI
Question:	Can I hook this up to siphon directly from the paint/stain container or will I have to spray a quart at a time
Answer:	You will not be able to attach this directly to a the paint/stain container. But you can use it with a pressurized paint tank. These can be found at paint supply stores, hardware stores, or online
Question:	I’m thinking of buying this for diy furniture projects at home, I have an air compressor, is there anything else I will need to purchase to operate
Answer:	We would also recommend an inline dryer and filter system. This for removing any moisture or debris from the airline that can contaminate the paint. These should be installed as far from compressor tank and as close to the spray gun as possible. The part number for the general purpose filter is PA212103AV. The part number for the dryer is PA208503AV.

Product features

Easy to Use Gravity Feed Spray Gun

The Campbell Hausfeld general-purpose, gravity-feed HVLP spray gun (DH580000AV) designed to spray all light- to medium-viscosity materials, including primers, enamels, lacquers, basecoat/clear coat systems and polyurethane/urethane top coats. Controls to adjust fluid flow, air flow and spray pattern make it easy to dial in the perfect settings for great results. The 600 mL gravity-feed canister makes cleanup easier and minimizes material waste. Finish your projects with Campbell Hausfeld.

Efficient HVLP Design

The efficient high volume low pressure spray gun features a 20 ounce canister capacity, allowing for uniterrupted use. In addition, the gravity feed design maximizes paint use, leading to minimal waste.

Start Your Projects Right Away

The DH580000AV also includes 2 in-line paint filters, a wrench, a 6mm hex wrench, and a cleaning brush; start your projects right out of the box.

The Results You Want

This sprayer features pattern, material, and air spray settings. The DH580000AV also handles all light- to medium-viscosity materials, including primers, enamels, lacquers, basecoat/clear coat systems and polyurethane/urethane top coats.

Tackle a Variety of Paint Jobs

The DH580000AV Spray Gun is ideal for most automotive painting, furniture painting and equipment painting applications.

Product description

An outstanding value in a professional-quality HVLP set to get you professional spraying and painting results. One-year warranty and Satisfaction Guarantee.

• [HEAVY DUTY]: One-piece all-steel gun body, rust-resistant stainless steel nozzle and solid brass cap for durability and longevity.
• [HVLP]: Gravity-feed fluid delivery design works together with three adjustable valve knobs for precise paint application.
• [SPECIFICATIONS]: Operation pressure 40 PSI; Working pressure 10 PSI; Average air consumption 4.5 CFM.
• [MULTI-USE]: Color coded 1.7 mm nozzle size is perfect for clear coat and a variety of automotive and household painting projects.
• [INCLUDES]: 600cc (20.3 fl. oz) aluminum cup with lid, metal air gauge/regulator, cleaning brush and a multi-size wrench for assembly/disassembly.

User questions & answers

Question:	Is the pressure gauge necessary? i am also looking at an astro brand spray gun and none of them include the pressure gauge? thanks
Answer:	Pressure gauges are not necessary if you have some sort of gauge in your air system allowing you to adjust the air pressure. However, having a gauge at the gun will allow better and more consistent control of pressures recommended for the products your spraying, which will help you with achieving the desired results.
Question:	Would this be good to paint a car
Answer:	I bought this to spray primers and it works very well for that task but for bases and clears I'm not sure how it would do. I wouldn't recommend it simply because of the fact that it has a 1.7 mm tip which is too large for bases and even clears so if you do decide to go with this brand gun I'd suggest going with a 1.4 mm tip. I personally own a Finnex FX3000 with 1.4 mm tip to spray base and clear coats and I LOVE that gun. Works great, sprays smooth and the design is awesome, very comfortable in the hand.
Question:	Has anyone used this unit for kitchen cabinet refinishing with Latex Cabinet Paint
Answer:	With the nickel finish you'll generally want paint with thinner, otherwise stuff gets gummy on the inside, use thinner and clean well and you'll be golden. On long work projects I recommend cleaning after 60-90 minutes of use then resuming.
Question:	I plan to paint kitchen cabinets using oil base or alkyd enamel. is 2.0 mm the proper size for this paint
Answer:	I used to use a 1.7 and I would thin latex paint for kitchen cabinets. Makes for a little bit of a finer finish but the 2.0 would work great. Something to consider though, with the experience I have had using over the years with these sprayers they work great, no complaints BUT I recently upgraded to an airless sprayer (a Graco unit from Home Depot). It's definitely a little more expensive on the front end but if you plan to spray anything including kitchens with a little frequency it cut actual spray time down significantly. It took a tenth of the time to spray the same sized kitchen with our graco unit vs the neiko. Good luck!

Product features

Perfect for Home DIYs

The classic high pressure low volume gravity feed fluid delivery design makes paint jobs a breeze. Equipped with three control valves to get the perfect spray you need.

Heavy Duty

The all steel body provides a wonderful rust resistant spray gun and stainless steel nozzle provides great durability.

Complete Set

The set comes with a metal air gauge and regulator for you to know how much air pressure you are getting and includes cleaning brush and multi-size wrench for easy cleanup.

Consistent Application

Each air spray gun is equipped with a fine nozzle size that is perfect for applications and projects around the house.

Easy Clean Up

Comes with aluminum cup with lid to hold 600 cc (20.3 fl. ounces) of fluid at one time without spills.

Tethering Trigger

Spray just the exact pressure and amount you need with easy to use and control tethering trigger style handle.

Product description

The Wagner FLEXiO 5000 is an indoor and outdoor portable paint system to speed up a wider variety of painting projects. It comes with the new innovative iSpray nozzle for broad surface coverage great for spraying walls, decks, and more. It provides an improved spray pattern and delivers concentrated material output for faster coverage. The Detail Finish nozzle is perfect for fine finishing projects like trim, cabinets, and furniture. The X-Boost Turbine has the power to spray untinned materials right from the can. It provides adjustable control, full coverage, and low overspray. The turbine is housed in the X-Boost Power Box, keeping the weight on the floor and out of the hand reducing user fatigue for long projects. Both nozzles, the 11. 5 foot hose and the handle with integrated power dial on the handle fit into the Power Box for organized storage when not in use. Package includes a FLEXiO 5000 Sprayer, Detail Finish Nozzle, and iSpray Nozzle.

• PERFECT FOR A VARIETY OF PROJECTS: The FLEXiO 5000 paint sprayer is great for applying a superior finish on furniture, walls, ceilings, cabinets, trim and more
• PORTABLE PAINT SYSTEM: The turbine sits on the ground, keeping the weight on the floor and reducing hand fatigue for long projects. It then delivers air power through the hose to spray unthinned coatings
• TWO NOZZLES INCLUDED: New spray nozzle provides an improved spray finish and is ideal for spraying larger jobs. The Detail Finish Nozzle is best for small projects and fine finishing. Spray patterns include horizontal, vertical, and round
• ADJUSTABLE SETTINGS: Turn the X-Boost Power Dial on the gun handle to easily adjust the level of air pressure. You can also turn the material flow control to increase or decrease your paint flow
• CONVENIENT CLEAN UP: New spray nozzle design allow for quick and easy 5 minute clean up. Plus, the turbine base has the ability to store both the hose and two nozzles for easy, portable storage

User questions & answers

Question:	Is there alot of overspray like a traditional sprayer
Answer:	Diamond Hard RePurpose Satin Enamel is a premium quality, water-borne acrylic coating that demonstrates exceptional adhesion, and durability, to a variety of substrates. RuPurpose is a great choice for melamine cabinet fronts, and also for your cabinet sides (veneer, laminate, finished wood, etc.). The key, of course, is surface preparation - the surface must be clean, dry and free of all dust, dirt, grease, oil, wax & polishes, and other surface contaminants that may inhibit the adhesion and performance of Repurpose. Although not absolutely necessary for adhesion, after cleaning surface I always recommend a slight "scuff-sanding" of melamine, or plastic laminate, with a very fine paper (220 - 350 grit) to create a "profile" for a greater, and faster, mechanical bond to these surfaces. RePurpose dries very quickly, and reaches maximum hardness & adhesion in approximately 7-10 days - during this time, handle painted items gently, and do not subject to cleaning surface for 2 weeks after application. Care & Maintenance: Use only a soft rag or sponge & mild, household detergent for cleaning surfaces painted with RePurpose (recommended Dirtex Powder, Soilax Powder, or other low-sudsing, phosphate-free detergents). Do NOT use abrasive cleanser (Ajax, Comet, Soft Scrub, etc.) as they may damage the acrylic film. Do NOT clean painted surface with "spray-type" cleaners, such as Fantastik, Formula 409. Dirtex Spray, etc.) as these products may contain solvents that soften, or remove, acrylic coatings. There is no need to polish or wax a RePurpose finish as continued applications may soften the finish.
Question:	can you attach a longer pickup tube so you can draw paint from 5 gal. bucket.... i can buy/make a pickup tube
Answer:	Hi, and thank you for your inquiry... At Majic Paints, we really don't manufacture anything that we could recommend, or would be suitable for use on a sink. Magic RePurpose is a premium grade acrylic satin enamel, that exhibits exceptional adhesion to a variety of surfaces, and substrates, and provides excellent protection and durability to those surfaces painted with RePurpose. Unfortunately, Diamond Hard RePurpose is not designed for surfaces subject to immersion, or submersion, areas/surfaces designated as "wet" areas. I hope this info is helpful - again, thank you.
Question:	Do you need a compressure with this
Answer:	Majic RePurpose is solid acrylic enamel that offers excellent adhesion to a host of surfaces, including properly prepared ceramic tile, plastic shower & tub surrounds, melamine and other difficult substrates...having said that, RePurpose is NOT recommended for surfaces subject to immersion, submersion or "wet" areas (such as shower stalls, etc.). Frequent exposure to harsh chemicals (e.g. lime & rust-stain removers, grout cleaners, etc.) and strong, or abrasive, "scrubs" may soften, or damage the film.
Question:	is this cordless? the lady on the picture uses the unit without plugging it!! wow
Answer:	In most cases, no. Majic Diamond Hard RePurpose has excellent adhesion to a wide list of substrates without the need of a primer. The reasons a primer may be recommended are (a) when making a drastic color change, (b) painting over un-sealed surfaces that may result in extractive staining (e.g. over certain woods, water-stains, crayon, etc.), or when painting over surfaces subject to rusting & corrosion (bare ferrous metal, etc.). Surface prep generally requires that the surface be clean, dry and free of any surface contaminants that may inhibit the product's ability to adhere to the surface. (Hint: Although not necessary for adhesion, a light "scuff-sanding" of glossy, slick surfaces, aids in even greater adhesion to the surface + better hiding & a more uniform application of the finish product).

Product features

Flexibility for Indoor and Outdoor Painting Projects

The FLEXiO 5000 paint sprayer applies a consistent finish on indoor and outdoor home improvement projects. The sprayer has adjustable settings right on the handle giving you adjustability at your fingertips and the sprayer comes with two nozzles to tackle a variety of projects.

Spray Unthinned Paints and Stains

The FLEXiO 5000 has the power to spray interior and exterior paints and stains right from the can including 2-in-1 paints and primers, latex and oil enamels.

Keeps the Weight on the Ground

This stationary paint sprayer puts the turbine weight on the ground, not in your hand, which allows for extended spraying comfort. When you’re done painting, the turbine base holds the hose and nozzles for easy storage.

Sheds

Spray unthinned exterior paints and stains through the iSpray nozzle to quickly paint a superior finish on your outdoor shed or storage buildings.

Interior Walls

Toss your brushes and rollers and use the FLEXiO 5000 instead. The spray gun is lightweight in your hand and can paint a wall 12 times faster than a brush.

Fences/Decks

With the weight on the ground, painting or staining a large fence or deck is easy! Plus, the 11.5 ft. hose allows you to reach tall or large areas.

Cabinets/Doors/Trim

Use the Detail Finish nozzle to apply a fine finish on small projects like cabinets, doors, and trim.

Product description

Rexbeti - A professional brand, Which only produce the best quality tools to improve the quality of life

The paint sprayer from Rexbeti will truely saving your time and do any paint projects for you. 3 ways spray pattern setting ensures precise control. With Hvlp technology and advanced motor, this electirc sprayer produces a roller-like finish, more powerful and quieter than other hand-held sprayers. Equipped with 4-size nozzles helps you to meet any projects like furniture, cabinets, crafts, dressers or exterior walls. You can turn the flow control knob to adjust the flow that you need. Ergonomic design with soft handle provides helps you to get the job done with ease. Choose RexBeTi's paint sprayer, it will be a great choice for small projects.

Specification

-Flow rate: 750ml/min

-Max.viscosity: 70 DIN-s

-Container capacity: 1000ml



Package Include

1 * Rexbeti hvlp Paint Sprayer

1 * User Manual

1 * Paint Container

1 * Viscosity cup

1 * Cleaning Needle

4 * Nozzles

5* Paint Strainers

• ( kindly notice : totally there are 4 nozzles, the 2.5mm black nozzle has already been installed on the gun. ) High power & superior finish - With high power, the ultimate-750 provides a precise spray pattern,creating the smooth and superior finish.With 1000ml high-capacity container,it will be your best electric paint sprayer for tables, chairs,fences,interior walls and crafts
• 3 spray patterns & 4 nozzle sizes - The ultimate-750 paint sprayer can be adjusted to 3 different spray patterns ?¨ºohorizontal, vertical and circular ,equipped with 4-size nozzles(1.5mm/2.0mm/2.5mm/3.0mm) for any painting projects.1.5mm, 2.0mm and 2.5mm nozzle are great for thin paints like sealers and varnish. 3.0mm nozzle is great for spraying latex paint,chalk type paint and milk type paint.And 5-pcs paint strainers is great for you to filter particles in paint
• Adjustable flow control - Regulate your paint output by adjusting the flow control knob on the sprayer to get different paint output, suitable for edges, corners and broad interior surfaces of various work
• Easy to use & wash - This paint sprayer is user-friendly,easy assemble and easy spraying.With packaged cleaning attachments,you can clean it easily and efficiently
• Extra long power cord & lightweight body - The 6.6 ft power cord is long enough for you to move freely in large work area. Rexbeti paint sprayer with lightweight and handy size fit perfectly in your hand and let you spraying longer without fatigue

User questions & answers

Question:	Does this Rexbeti paint sprayer require a compressor
Answer:	No it is electric.....just plug it into 120 volt wall socket
Question:	Has anyone used Flotrol to thin the paint
Answer:	Flotrol thins Latex paints. i have used it but not with a gun.
Question:	Has anyone used this to paint their home walls? And does it work really well on them
Answer:	I have painted cabinets, drawers, doors, and walls with this sprayer. It works great! I would like to make a recommendation and that is to add water to your paint. The output increases and lessens the burden on the motor. You can go without adding water to thin it however there is a difference in output and you can smell and hear the motor working much harder.
Question:	Can i purchase extra paint containers and lids? Or are the paint containers interchangeable with another brand
Answer:	This is the same container that comes with the gun. https://www.amazon.com/VonHaus-Accessory-Container-Cleaning-Compatible/dp/B07G39J1LN/ref=cm_cr_arp_d_product_top?ie=UTF8

Product features

Powerful Paint Sprayer

REXBETI Spray gun is suitable for table, Chair car, shutter and any wood furnitures. Equipped with 3 different sizes nozzles to meet any tasks.

Detachable design offers a quick and easy cleaning after spraying. With the 1000ml container, you don't need to add the paint frequently.

3 Spray patterns

Simply rotating the spray tip to adjust 3 different spray patterns: Horizontal-Vertical Circular. The flow control knob is a smart design for you to adjust the flow rate at any time

Handy & Lightweight

Ergonomic design for home owner. Just plug it in and creat a colorful house with REXBETI ultimate-750 paint sprayer

• Free Spray Gun Keychain.
• Two-piece construction with gun featuring exclusive air valve design.
• Fully adjustable wide fan pattern control.easy-to-clean paint spray gun
• 1 quart capacity dripless cup.
• Nozzle Size: 1.8mm.real stainless steel nozzle and needle .

User questions & answers

Question:	How can I buy gaskets and packing
Answer:	Refer to seller
Question:	Can I use latex paint with this gun
Answer:	yes. you would have to adjust the settings and the psi depending how thick
Question:	Can it be used to spray stain on a wood project
Answer:	Yes
Question:	Can I spray a truck bed liner paint with this sprayer
Answer:	Yes, berliner spray will need to be thinned a bit though. It wont come out as "textured" as the spray guns the typically are used for bed liner.

Product features

Not Your Average Hardware Store Spray Gun

From primers to tops coats, acrylics to contact cement, and car doors to picket fences and interior doors - PNTgreen 4001S sprays nearly everything on almost anything.

Large Adjustable Fan With Supe

Adjust up to an 11" fan size from an 8" distance, cutting job times and providing clean even coverage that a brush just can't match. (Requires 7-12CFM / 3HP compressor)

Anti-Spill Air Feed Line

Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister.

New Detailed Instructions For

Included manual explains how to set up your air supply, dial in the 4001s adjustable fan size, fan shape, material rate, and paint any substrate successfully.

Product description

DESCRIPTION:

The DYNASTUS siphon-feed spray gun is perfect for spraying oil-based or latex paints, suitable for medium to large size painting jobs in a wide variety of automotive, home, and furniture applications. This spray gun requires 7-12CFM / 3HP compressor, and delivers an adjustable pattern of up to 11 inches and handles lacquer, enamel, stain, primer and urethane. The anti-drip canister helps minimize cleanup.



Kit include:

Extra spanner: Dismantling and installing a spray gun for cleaning

Wire Brush: For cleaning painter nozzle

Handle Tooth Brush: For cleaning paint cup

Filter Funnel - 100 Mesh, stainless steel net: When spraying latex paint, it is recommended to use the filter funnel

Quick Coupler Plug- 1/4-Inch NPT female thread

• Professional quality spray paint gun, perfect for spraying oil-based or latex paints, suitable for medium to large size painting jobs in a wide variety of automotive, home, and furniture applications
• Requires 7-12CFM / 3HP compressor, Using the paint gun reduces over spray and allows you to spray larger surfaces without having to stop
• Separate and adjustable fluid and fan pattern make for more precise fan patterns and less waste
• Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister
• Includes extra spanner, handle tooth brush, wire brush, 1/4 NTP female plug, 100 mesh filter funnel, making clean-up easy and quick!

User questions & answers

Question:	Can it be used for latex paint for walls
Answer:	I had one that worked great for latex. I ran 60-100 psi air and never thinned the paint. my problem was I dropped the sprayer head and broke the aluminum pickup tube and can't find a replacement
Question:	can you get other spray nozzles for it
Answer:	I don't know about additional nozzles, but the one provided does have an adjustable spray pattern.
Question:	can you get other spray nozzles for it
Answer:	At present, the gun is equipped with only 2.5mm nozzles. If necessary, it will soon be able to supply 1.0mm, 1.8mm, or other size nozzles separately for purchase.
Question:	Will this gun work for water based poly
Answer:	We have not use this gun for this purpose but I assume that it will. We fill the gun with solvent after we pain to clean it up and it sprays the solvent just like paint. The gun is a good value for the money.

Product features

Thin Latex Paint

Quality latex paint is significantly thicker than traditional finishes and must be thinned before it is useful as a spray finish. Insufficient thinning results in the paint coming out of the spray gun in unsightly blobs or not at all.

●While you must thin latex paint with water, the amount of water you must add varies from brand to brand. Higher quality latex paint is thicker, therefore requiring more water; lower quality latex paint is thinner, therefore requiring less water.

●Most paint will require 10% water in latex paint and mixing thoroughly. Never add more than 25% water in any latex paint. Excessive thinning reduces the paint's ability to adhere to and cover a surface.

●Test your paint thoroughly before applying it to a large surface.

Product description

AST4008 Features: -Nozzle Size: 1.8mm.-Operation Pressure: 50-60psi.-Avg. Air Consumption: 7-12cfm.-Air Inlet Thread NPT: 1/4''.-Gun 1.8mm Siphon Feed Primer w/1qt. Aluminum Cup SUPERCEDED. Specifications: -Required Compressor: 3hp. Dimensions: -Net Weight: 3lbs./1.36kg.-Max. Pattern at 8'' Distance: 11''/280mm. Warranty: -1 yr warranty on material and workmanship.

From the Manufacturer

The Astro Pneumatic 4008 Spray Gun with Cup - Red Handle 1.8mm Nozzle is designed for fast application of primers, heavy coatings and glues. This tool will increase productivity and save you money by minimizing waste. Range of use includes body, wood working, production and cabinet shops as well as industrial and marine. Specifications: Nozzle Size: 1.8mm, Operation Pressure: 50-60psi, Net Weight: 3-pound/1.36kg, Dimensions W by H: 6-1/2-inch by 12-inch, Avg. Air Consumption.: 7-12cfm, Air Inlet Thread NPT: 1/4-inch, Required Compressor: 3hp, Max. Pattern at 8-inch, Distance: 11-inch/280mm.

• All-purpose easy-to-clean paint spray gun
• Two-piece construction with gun featuring exclusive air valve design
• Fully adjustable wide fan pattern control
• 1 quart capacity dripless cup
• Nozzle Size: 1.8mm

User questions & answers

Question:	Can this gun be used for spraying upholstery adhesive such as dap weldwood contact adhesive
Answer:	It all depends on how thin the stuff is. For this gun it needs to be fairly thin.
Question:	I want to add a 30 inch extension nozzle to this device. Has anyone else done this
Answer:	I think you are looking for a airless sprayer.
Question:	Can i leave paint in the canister, seal it, and reuse the next time
Answer:	Yes,if it's not left too long . I wouldn't leave it for more then a few days.
Question:	I know I need an air compressor what else is needed, I have no idea how to do this
Answer:	All you need to get spraying is a male coupling and your air hose to fit, you can get the coupling at any hardware store for about $4.00

Product features

Not Your Average Hardware Store Spray Gun

From primers to tops coats, acrylics to contact cement, and car doors to picket fences and interior doors - the 4008 sprays nearly everything on almost anything.

Large Adjustable Fan With Superior Atomization

Adjust up to an 11" fan size from an 8" distance, cutting job times and providing clean even coverage that a brush just can't match. (Requires 7-12CFM / 3HP compressor)

Anti-Spill Air Feed Line

Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister.

New Detailed Instructions For Beginners

Included manual explains how to set up your air supply, dial in the 4008's adjustable fan size, fan shape, material rate, and paint any substrate successfully.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality.

1.8mm tip size.

Model No. AS7SP.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality.

1.7mm tip size.

Model No. AS8S.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality with a 2QT tank and feedlines.

1.7mm tip size.

Model No. 2PG7S.

• 【3 Spray Patterns & 5 Nozzle Sizes】Paint sprayer can be adjusted to 3 different spray patterns: horizontal, vertical and circular, and equipped with 5 size nozzles (1.2mm/1.5mm/1.8mm/2.5mm/3.0mm) for any painting projects, such as furniture, cars, fences, interior walls, garage doors, garden tables and chairs etc.;
• 【Perfect Design For User Experience】Detachable, making it easier to use and clean; the paint output can be controled by adjusting the flow control knob on the sprayer to obtain different paint output; The 6.6ft power cord is long enough to allow you to move freely within a larger work area;
• 【High-Quality Materials】Using copper nozzles can withstand pressure more than plastic nozzles, and is less prone to clogging. It can also make the spraying surface more concentrated and more uniform. The use of double-layer insulation materials allows you to avoid worrying about any safety issues during operation;
• 【Powerful Upgrade Advantages】The rear foam pad can prevent paint from flowing backwards, block the nozzle, and make the spray more uniform; it also has dust and moisture resistance functions, which can not only extend the life of the motor, but also ensure the purity and effect of spray color;
• 【Package Contents】1X Paint Sprayer, 1X 1000 ml Paint Container, 5X Size Nozzles, 1X Viscosity Cup , 1X Nozzle Cleaning Needle, 1X Cleaning Brush, 1X Spanner, 1X Lid Pot, 1X User Manual. If you have any questions, please contact with us, our technical team and after-sales team are always behind you.

User questions & answers

Question:	Does this clog often
Answer:	I have been using it for several months and the nozzle is not clogged. Because this is a brass nozzle, not plastic. Also, pls remember clean it after each use.
Question:	I lost my manual can do you have a pdf version
Answer:	You can contact seller directly using the link (click) on your order. They will send a electronic manual to you.
Question:	I need some spare parts for my Yattich 500 watt spray gun, where can I buy them
Answer:	I also asked this question to the seller through the order, and the answer was: they will soon have a 1000ml container together with other spare parts for sale separately.
Question:	Can both latex and oil based products be used in the same spray container and how do you clean after using oil base
Answer:	Normally, I do not recommend that latex paints and oil-based paint products are not cleaned after using one kind of paint, and use the other directly. After using the latex paint (or oil paint), put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean.

Product features

3 Spray Patterns

• Three different types of spray patterns by simply adjusting the location of air cap: Horizontal-Vertical-Circular.
• The flow control knob is a perfect design for you to adjust the flow rate at any time.

Copper Nozzles Size

• More options, and suitable for more occasions and projects.
• Compared with plastic nozzles, 5 copper nozzles can make the sprayer have better durability and not easy to block, and can reduce resistance and maintain good operating temperature and extend motor life.

Detachable

• Detachable design, the first is to consider portability, and is mainly convenient for quick and easy cleaning after spraying.
• Every component is tested, can pass through 1.5m height drop test with full load in the bottle.

Adjustable Flow Control

• By adjusting the flow knob to control the coating speed and the flow rate of the project size, you can achieve precise paint work.
• With a maximum flow rate of 800ml / min, it is suitable for edges, corners and wide inner / outer surfaces of various work and DIY projects.

Wood Products

• For chair, table, shutter, cabinets, wooden artwork, DIY etc.
• Note: The smaller the size, the finer and the higher the surface quality.

Crafts Steel Furniture

• For car, bicycle, model, railings, heating pipes, window frames, boats, garage doors, metal garden fences etc.

Interior / Exterior Walls

• For internal wall, external walls, outdoor floors etc.

Garden Projects

• For yard furniture, wooden garden fences, wooden pile, corridor etc.

Warm Tips:

1. Before using, please choose proper copper nozzle, spray patterns. Check if you have tighten up the container and paint tube; In addition, we recommend that you test on cardboard or wooden boards before spraying important items, such as walls or furniture.

2. Please add some water(or paint thinner) to dilute the paint and stir to ensure that your paint passes smoothly through the viscosity cup within 100 seconds and meets your requirements.

3. After finishing spraying put the corresponding thinner in the container, then install the container on the product, and perform a similar operation as spraying to properly clean the container (The purpose is to clean the remaining paint in the containers, pipes and nozzles). Then remove the container and clean.

4. Please wash the sprayer gun immediately with the brush. All parts of the paint sprayer are detachable.

5. Most importantly, please read the product user manual carefully before using it.

TECHNICAL DATA:

Model; YT-191

Voltage: 110V / 60Hz

Power consumption: 500W

Nozzle size: 1.2, 1.5, 1.8, 2.0. 2.5, 3.0 mm

Max flow: 800 ml/min

Max viscosity: 100 DIN-s

Power cord: 2m

Spraying pressure: 0.1-0.2 bar

Vibration Level: < 2.5m/s²

N. Weight: 1.37 kg

Product description

DESCRIPTION:

The DYNASTUS spray gun is a composite gravity feed HVLP spray gun designed to spray all light to medium viscosity materials. Enamels, lacquers, polyurethane, urethane top coats (including basecoat/clearcoat) and all primers can be applied. This spray gun is supplied with a 20 oz. (600 ml) gravity feed cup, with 2.0 mm nozzle. This air regulator will allow you to have precise air control at the paint sprayer for best, consistent results. This paint gun comes in handy when working with small areas or those tight places that are hard to reach with a larger spray gun. It sprays anywhere from 20 - 43 PSI, a good general pressure to start spraying at is 30 PSI.



Kit include:

Extra spanner

Handle Tooth Brush

wire brush

Filter

1/4 NPS female plug

Air regulator with gauge

• Suitable for water-soluble paint and variety of spray paints, dedicated to car repair industry, top quality furniture, and other precision equipment which need fine surface finishing.
• Composite construction for lightweight and comfortable for longtime operation even in winter time, HVLP (High Volume Low Pressure) to get superior finish and save paint
• Air regulator allows you to have precise air control, helping you get the optimal atomization. The stainless steel needles and precision machined air caps, give you a fully atomized and consistent spray pattern for a smooth professional finish
• Built-in 3 ergonomic anodized knobs are perfect for precise control: fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow
• Includes extra spanner, handle tooth brush, wire brush, 1/4 NTP female plug, filter and air regulator, helping you get the best end result

User questions & answers

Question:	have you fixed the regulator issue.You know the fact that it doesn't work
Answer:	The one I revived was bad. I ought a different one for the gun.
Question:	Are different size nozzels available for this spray gun
Answer:	Sorry, it's not equipped at the moment
Question:	I have a 6 gallon compressor 165psi 2.6 scfm 90psi work fine w this gun
Answer:	Yes it will work with this compressor. I have a portor cable 6 gallon 150 with the same spec and it runs the gun fine even constantly. The gun only draws 2-3 cfm. Maybe 4+ if your fan and fluid are wide open. Fan controls most of your air required. The fluid trigger does to a extent. I've even had the compressor cycle off while using it. So it's awesome to use as a portable touch up gun. They make larger cups with it's cup fitting size. it doesn't have to be touch up. One last thing if you don't want a big stationary 220v compressor. What I did to paint is parallel two or three compressors together. Lowe's air tank $60 7 gallons already has the air fitting. Go to any hardware store. By a T air fitting. Connect the two compressors to the T. And either the t to a air receiver or into your using line. Compr seors are cheap used on Craigslist. Or 4.0 crm compressors go on sale $100 all the time. I now use kobalt 26 gallon 4.5, central pneumatic 10 gallon 5.3 cfm at 90 and a porter Cable going into a receiver tank 7 gallons. If they arenot the same psi set the regulator of the higher one to the highest of the other close enough. Every compreseor and tanks have safety relief valves. Much cheaper and portable then 220v I have to roughly 50 gallons at 125psi and 5.3 peak horsepower. Or just not plug in the portor cable and let it be back filled through regulator for extra space and have that at4.3 horsepower and 10cfm at 90 plenty to paint. And in 5 mins it's in and out of my truck. Just make sure you plug each compressor into a separate breaker. Now mostly just use the 2 big powerful ones with the air tank and leave the pancake compressor out. I can paint a call non stop without it. $300 at harbor freight you can get 2 10 gallon 5.3 compressors 7 Gallon portavle air tank from Lowe's and you have a 27 gallon 125psi at 10 cfm@90 or if you have air tank just get a new 1/2npt fitting to be run a regular air fitting. I just prefer it ready to go out the box. The price of a pancake is the same of a good 4cfm compreasor on sale shop around. I've seen people connect 4-5 pancakes together to paint. Just depends on circuitaas long as one compressors safety valve works it works for all of them being connected. I've done this for longer some have been alive worse I've had to do was flip a breaker switch
Question:	Does this gun spray solvent paint
Answer:	Yes, but the paint should be filtered before spraying.

Product description

The Control Spray Max provides a smooth, consistent finish in less time than traditional painting methods. The controls give you the ability to adjust based on the project you’re working on and the type of material being used, which are features that a spray can or brush can’t offer! The spray patterns range from 1/2" to 12" wide depending on the settings, which allow for optimum control and precision for fine finish work. HVLP technology uses a high volume of air at low pressure to atomize materials into fine particles. This results in a professional finish, with virtually no overspray. Package includes a Control Max sprayer, 1 qt. metal cup, 1.5 qt. plastic cup, 20 ft. hose, viscosity cup and user manual.

From the Manufacturer

The Control Spray Max sprays materials in patterns from 1/2" to 12" wide with optimum control and precision making it superior to brushes and spray cans for fine finish work. HVLP technology uses a high volume of air at low pressure to atomize materials into fine particles. This results in a professional finish, with virtually no overspray.

• HVLP PAINT SPRAYER: The Control Spray Max paint sprayer uses high volume, low pressure technology to atomize materials into fine particles and provide a smooth finish on door trim, decks, furniture, more
• SUPERIOR NOZZLE: The sprayer comes with a versatile nozzle that can be used to spray countless materials and projects. The nozzle is durable and long lasting compared to cheap alternatives. This one nozzle is all you need for your next project!
• USE WITH A WIDE VARIETY OF MATERIALS: Powerful two-stage turbine makes it easy to paint walls and surfaces with thinned latex paints and thinner materials like stains and poly
• ADJUSTABLE SETTINGS: Customize your paint flow by using the pressure control dial and material flow adjuster to receive the perfect finish every time. Turn the air cap to spray round, horizontal, or vertical
• GREAT DESIGN: The stationary base is connected to the spray gun with a 20 ft. hose to easily reach your painting project and reduce hand fatigue. Also includes a 1 ½ qt. cup and professional grade metal 1 qt. cup

User questions & answers

Question:	Is this an electric sprayer or do you need an air compressor
Answer:	No air compressor is needed. It is electric powered, not air.
Question:	Do I need an air compressor for this? Or is this a stand alone tool
Answer:	The base unit has a blower or low-pressure compressor built in, no external compressor required. Make sure the base is sitting where it will pull in clean air, no dust or debris.
Question:	can this be used for oil base paints
Answer:	Yes. Cleaning oil-based primer took forever to clean because you must use mineral spirits and be sure to get every bit of it off the interior parts. Cleaning latex-based primer and paint out of the sprayer with soapy water was much easier but still time-consuming, especially since I tried to get every bit of primer/paint off the outside of the sprayer and pump in case I want to sell it if we ever finish the kitchen-painting project. I am an almost elderly homemaker, amateur painter, and I was able to use it successfully.
Question:	Has anyone use it as a Spray tan system
Answer:	I have. The turbine has similar specs (i.e. correct pressure and airflow) to some other HVLP spray tanning systems; however, for me the cup size was too large and spray pattern on the included nozzle made it difficult to not overspray. I purchased a wagner "spray tan cartridge attatchment" aka "Wagner Detail Front End Kit" (ASIN B00FDZDO32). It works ok but the cup size is still fairly large and tended to overspray . I have since replaced that gun with a "Maxi-Mist Spray Tanning Gun Replacement Lightweight" ($35 on ebay) and am happy with the results even though I had to adapt the hose to fit. Maxi-mist's MaxiMist™ Evolution TNT Spray Tanning System looks like the wagner painted all black and I wonder if the front end gun ($50) is compatible. I don't use this professionally but can say its works, especially with a purpose made gun. I got best results with the pressure set just above minimum.

Product features

Get Your Projects Done Quickly

The Wagner Control Spray Max applies coatings quicker than a brush or roller and provides a great finish on your surface. It’s perfect for exterior and interior projects like decks, cabinets, trim, furniture and more.

Stationary Paint Sprayer

This stationary paint sprayer puts the turbine weight on the ground, not in your hand, which allows for extended spraying comfort. The base features a convenient handle to easily carry the turbine from place to place.

Spray Even More Materials

Powerful two-stage turbine makes it easy to paint surfaces with thinned paints and thinner materials like stains and poly.

Cabinets

Transform the look of your kitchen and bathroom cabinets by using the Control Spray Max paint sprayer.

Trim

With the weight on the ground, painting all of the trim in your home will be a breeze!

Small Decks

The Control Spray Max will refinish your deck in a fraction of the time it’d take with a brush. Plus, the stationary base will keep your arms comfortable while spraying.

Product description

The HomeRight Finish Max paint sprayer is great for beginners and experts alike when painting and refinishing furniture, kitchen cabinets, trim, and more! This versatile sprayer applies a smooth finish and can be used with chalk and milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. The Finish Max uses High Volume, Low Pressure (HVLP) technology and it has a turbine motor, which means that a separate air compressor isn’t needed! The Finish Max has three adjustable spray patterns (horizontal, vertical, round) and an adjustable flow control knob for more project versatility. Plus it can hold 27 ounces of paint, which means less refilling when working on larger projects. The unit is lightweight at only 2. 76 lbs, which reduces hand fatigue when painting or staining projects. The Finish Max comes with an air nozzle, cleaning brush, and viscosity cup.

• BETTER THAN A BRUSH OR SPRAY CAN: The HomeRight Finish Max paint sprayer is an easy-to-use electric paint sprayer that applies a smooth finish without brush marks. It’s the best paint sprayer option for painting furniture, cabinets, trim, and more
• ADJUSTABLE SETTINGS, EASY TO USE: The paint spray gun features easy adjustable settings to help complete your project. You can adjust the air cap to spray horizontal, vertical, and round. You can also adjust the material flow control knob to quickly increase or decrease the material output, which allows you to customize your paint flow to your project/coating needs
• EASY TO SPRAY AND CLEAN: The Finish Max is simple to set up and can be used to spray a wide variety of materials such as chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. It also comes with a viscosity cup to easily measure paint thickness. When you’re done with your project, simply clean the sprayer with water for water based materials or mineral spirits for oil based. The sprayer also comes with a useful cleaning brush to make clean-up quicker
• BRASS SPRAY TIP TECHNOLOGY: The HomeRight Finish Max paint sprayer uses a 2 mm. precision brass spray tip and nozzle, which provide superior performance over plastic counterparts. As opposed to plastic, the Finish Max brass nozzles and tips provide a consistent, high quality spray pattern and have superior corrosion and wear resistances
• U.S. BASED CUSTOMER SERVICE AND 2 YEAR WARRANTY: If you have any questions about your sprayer, please call our U.S based customer service team for quick and efficient assistance. We’re proud of our products, which is why the Finish Max is backed by a 2 year warranty

User questions & answers

Question:	Can this be used indoors
Answer:	Dear customer，Some paints and primers may need to be thinned so I would try it on a spare piece of wood or cardboard first. You can thin it with water and add paint conditioner to the coating to slow down the dry time and help it flow better. The better the coating is mixed up the better it will spray. This paint sprayer will spray most coatings. It is ideal for big surface projects such as spraying walls, sheds, fences etc…
Question:	The cleaning instructions say to remove the brass cover over the needle AND the needle itself to clean it. I can't see how to remove the needle. Can anyone help with this? I'm not sure if the instructions just aren't accurate, or if I'm not seeing something that I should be
Answer:	Yes, it can be used to paint ceiling.
Question:	I have 22 shutters on my house to paint. Is this sprayer too small? Will I need to refill often? Also will be acrylic latex paint.. That work? Thanks
Answer:	I wouldn’t waste your money on this! It clogs up even if you thin the paint...so your basically spraying water for it to consistently work.
Question:	Can chalkpaint (latex + nonsanded grout mix) be used with this
Answer:	The max viscosity of the paint for this sprayer is 70 din/sec, it can be used for painting on marine applications if the gelcoat meets this consistency.

Product features

Lightweight Design

The Finish Max is our lightest sprayer and fits comfortably in the user’s hand, reducing fatigue and increasing maneuverability around projects.

Superior Finish

With 400 watts of power, the Finish Max sets a benchmark for powerful HVLP sprayers. The Finish Max provides a precise spray pattern, creating a fine, factory-like finish.

Flow Control

Regulate your paint output by adjusting the flow control knob on the Finish Max paint sprayer. The Finish Max has more output and more pressure, making it a champion sprayer for DIY projects.

Seals and Splash Guard

The Finish Max’s tight seal allows air to flow into the pressurized cup, and the foam splash guard prevents paint from back flowing into the nozzle area, providing a super seal that prevents leaking.

Simplified Design

The Finish Max has a simplified design and less parts, making clean-up even easier for beginners.

Always Available with Answers

U.S. based customer department is available by phone and email to answer any product question you may have.