10 best air compressor paint sprayer

• One-piece lightweight aluminum gun body with 13.5 oz./ 0.4 l aluminum cup
• Separate and Adjustable fluid , fan pattern and air controls for precise application
• Air consumption 4.2 to 6.0 CFM @ 30 PSI
• Working pressure 44-58 PSI. Maximum pressure 60 PSI
• Fan Pattern: 5.5'' to 7.5''

User questions & answers

Question:	It is good for paint cars
Answer:	The lid will not say on, Not a good buy.
Question:	Can I replace the air valve inlet with a quick connect? And if so what size because I can’t use it currently because my compressoronly has a quick con
Answer:	Yes, you can. I did this from the minute I got it out of the box. It’s a standard 1/4” threaded opening, so any 1/4” quick connect will work
Question:	will it spray automotive base and clear coat
Answer:	Thanks so much for you questions, this gun is better for base coat , My another ASIN B07CPQDCXH is better for clear coat .
Question:	what size air compressor do i need for this gun
Answer:	We have a 90 gallon compressor tank at work multiple manifolds and outlets set to 120psi. I also purchased a regulator and attached it to the spray gun.

Product features

Before First Use

NOTICE: Before first use, clean the

Spray Gun thoroughly.



If not removed, the material used for testing and corrosion prevention will contaminate paint.

Spraying Technique

CAUTION: DO NOT STOP WHEN SPRAYING.

Spraying materials will start to set and dry.as soon as they come in contact with the air.





They will cause a permanent clog if not cleared.immediately.If discontinuing spraying for more than half an hour, turn off the air supply, disconnect Cup from Gun Body and thoroughly rinse Cup and Gun Body with fresh, clean water.

Paint Preparation and Filling

Note:Proper paint mixture is essential. Follow the manufacturer’s directions. Most paints will spray easily if they are thinned properly.

1. Thread the Cup to the Gun Body and tighten until the Cup is securely in place.

2. Thin the paint according to manufacturer’s directions and mix thoroughly.

3. Carefully strain the paint through a paint strainer or a piece of cheesecloth.

Product description

The Super Finish Max does it all. From furniture and cabinets to fences and walls, this sprayer can cover a wider array of projects and coatings with less thinning and hassle. This High Volume, Low Pressure (HVLP) sprayer has a turbine motor, which means that an air compressor isn’t needed! The six available spray tip sizes (3 included) allow for ultimate customization of paint flow for all of your projects! The two different air caps allow for a wide or fine spray pattern and the volume control knob provides further customization of paint flow. The Super Finish Max is ideal for oil or water based materials such as: chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. 450 watts of power sprays thicker paints with less thinning! The newly-designed pickup tube and cup vent allow for quicker and easier clean-up. The built-in access door makes for easy inlet air filter changes and the large 39-ounce container capacity means less stopping to refill. Includes: Super Finish Max, container lid, cleaning brush, 4. 0 mm nozzle and tip (red), 2. 0 mm nozzle and tip (green), 1. 5 mm nozzle and tip (blue), wrench, wide spray pattern cap (yellow), fine spray pattern cap (black). Spray Gun Tip Included. Spray Tip Pattern Size (in.)-8(in).Performance Features : Adjustable Spray Width,Air Flow Valve,Flow Control,Low Overspray

• PAINT SPRAYER FOR COUNTLESS DIY PROJECTS: The HomeRight Super Finish Max paint sprayer offers the ultimate DIYing experience. It’s an easy-to-use electric paint sprayer that’s the perfect step up from the Quick Finish and Finish Max paint sprayers. It’s great for applying a professional-like finish on countless small to large sized DIY projects like fences, decks, furniture, cabinets, dressers and more!
• ADJUSTABLE SETTINGS TO SUIT ANY PROJECT: The paint spray gun features easily adjustable settings to help complete any project. You can adjust the air cap to spray horizontal, vertical, and round. You can also adjust the material flow control knob to quickly increase or decrease the material output to customize your paint flow and project/coating needs
• MORE POWER=SPRAY MORE MATERIALS: The Super Finish Max offers 450 watts of powerful spraying experience, which is great for projects big and small. It can be used to spray a wide variety of paints and stains such as chalk type paint, milk paint, latex paints, enamels, primers, clear sealer, polyurethane, stain and varnish. When you’re done with your project, simply clean the sprayer with water for water based materials or mineral spirits for oil based. The sprayer also comes with a useful cleaning brush to make clean-up quicker
• 3 BRASS SPRAY TIPS INCLUDED FOR GREAT FINISH ON COUNTLESS PROJECTS: This professional quality paint sprayer includes three brass spray tips to suit your project needs. These brass spray tips offer superior performance and precision over plastic counterparts. They provide consistent, high quality spray pattern and offer corrosion and wear resistances. Use the 4.0mm (red) tip for primer and latex paint, 2.0mm (green installed on sprayer) for latex and chalk paint, and 1.5 mm (blue) for stains and sealers.
• U.S. BASED CUSTOMER SERVICE AND 2 YEAR WARRANTY: If you have any questions about your sprayer, please call or chat with our HomeRight U.S based customer service team for quick and efficient assistance. We’re proud of our products, which is why the Super Finish Max is backed by a 2 year warranty

User questions & answers

Question:	So if I use this with Oil based paints wouldn't there be a different approach to clean up
Answer:	There is a slightly different approach for oil based paints. Instead of using warm water to clean the unit, you'd use a cleaning solvent like mineral spirits.
Question:	Would i have to thin benjamin moore's advance paint
Answer:	The Super Finish Max should be able to spray it with no thinning required, but extremely thick paints may need to be thinned down slightly. Spray your paint on a piece of cardboard to test for the right paint flow.
Question:	Does this require a compressor
Answer:	No, the Super Finish Max does not require a compressor. It is a plug-in unit, which means all you need is a standard power outlet.
Question:	Will this spray rustoleum oil based paint
Answer:	Greetings! If you go to https://www.homeright.com/products/super-finish-max-extra you will see the link to download the manual for this terrific paint sprayer! Yes, you can spray oil based paints, but you’ll need to make sure to use the proper spray tip. This sprayer comes with the 1.5mm, 2mm and 4mm tips of which you would use the 1.5mm for oil based paints, stains, polyurethane, etc. You can also purchase separately the 1mm tip for such things as sealer and varnish to obtain an even finer spray. Please note that there is also a 2.5mm and 3.5mm tips available as well. The suggested use for all these tips are explained in detail on page 5 of the manual. Thinning may be necessary and you should do so based on the paint manufacturer’s guidelines. Please note that this sprayer is NOT meant to spray automotive paints as those paints need an even finer spray than what this sprayer produces. I would also suggest you sign up for Homeright’s newsletter, as they send out a variety of projects to use this sprayer and you can learn a great deal on how to use it. Good Luck and Enjoy!!!

Product features

Taking On Do-It-Yourself Projects

With 450 watts of power, the Super Finish Max Paint Sprayer can handle thicker paints and varnishes which means no thinning.

More Versatile

With 6 available spray tips (3 included), you can tackle a wide variety of projects such as furniture and cabinets, but also take on fences and decks which are uses typically outside the capability of an HVLP sprayer.

Larger Capacity

The 39 fluid ounce container enables you to spray larger projects without having to refill as often, saving you time.

Furniture

Fences

Cabinets

How it Works

The Super Finish Max uses precision brass spray tips and nozzles, which provide superior performance over their plastic counterparts.

With 450 watts of power, combined with an adjustable air cap, the sprayer atomizes paint into tiny particles. These tiny particles are what is necessary for a fine factory-like finish.

Competitor's units can only spray chunks of paint, which after a couple of coats resembles a rough, paint roller-like finish.

Product description

AST4008 Features: -Nozzle Size: 1.8mm.-Operation Pressure: 50-60psi.-Avg. Air Consumption: 7-12cfm.-Air Inlet Thread NPT: 1/4''.-Gun 1.8mm Siphon Feed Primer w/1qt. Aluminum Cup SUPERCEDED. Specifications: -Required Compressor: 3hp. Dimensions: -Net Weight: 3lbs./1.36kg.-Max. Pattern at 8'' Distance: 11''/280mm. Warranty: -1 yr warranty on material and workmanship.

From the Manufacturer

The Astro Pneumatic 4008 Spray Gun with Cup - Red Handle 1.8mm Nozzle is designed for fast application of primers, heavy coatings and glues. This tool will increase productivity and save you money by minimizing waste. Range of use includes body, wood working, production and cabinet shops as well as industrial and marine. Specifications: Nozzle Size: 1.8mm, Operation Pressure: 50-60psi, Net Weight: 3-pound/1.36kg, Dimensions W by H: 6-1/2-inch by 12-inch, Avg. Air Consumption.: 7-12cfm, Air Inlet Thread NPT: 1/4-inch, Required Compressor: 3hp, Max. Pattern at 8-inch, Distance: 11-inch/280mm.

• All-purpose easy-to-clean paint spray gun
• Two-piece construction with gun featuring exclusive air valve design
• Fully adjustable wide fan pattern control
• 1 quart capacity dripless cup
• Nozzle Size: 1.8mm

User questions & answers

Question:	Can this gun be used for spraying upholstery adhesive such as dap weldwood contact adhesive
Answer:	It all depends on how thin the stuff is. For this gun it needs to be fairly thin.
Question:	I want to add a 30 inch extension nozzle to this device. Has anyone else done this
Answer:	I think you are looking for a airless sprayer.
Question:	Can i leave paint in the canister, seal it, and reuse the next time
Answer:	Yes,if it's not left too long . I wouldn't leave it for more then a few days.
Question:	I know I need an air compressor what else is needed, I have no idea how to do this
Answer:	All you need to get spraying is a male coupling and your air hose to fit, you can get the coupling at any hardware store for about $4.00

Product features

Not Your Average Hardware Store Spray Gun

From primers to tops coats, acrylics to contact cement, and car doors to picket fences and interior doors - the 4008 sprays nearly everything on almost anything.

Large Adjustable Fan With Superior Atomization

Adjust up to an 11" fan size from an 8" distance, cutting job times and providing clean even coverage that a brush just can't match. (Requires 7-12CFM / 3HP compressor)

Anti-Spill Air Feed Line

Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister.

New Detailed Instructions For Beginners

Included manual explains how to set up your air supply, dial in the 4008's adjustable fan size, fan shape, material rate, and paint any substrate successfully.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality.

1.8mm tip size.

Model No. AS7SP.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality.

1.7mm tip size.

Model No. AS8S.

Other Popular Siphon Spray Guns By Astro

The next step up in finish quality with a 2QT tank and feedlines.

1.7mm tip size.

Model No. 2PG7S.

• Free Spray Gun Keychain.
• Two-piece construction with gun featuring exclusive air valve design.
• Fully adjustable wide fan pattern control.easy-to-clean paint spray gun
• 1 quart capacity dripless cup.
• Nozzle Size: 1.8mm.real stainless steel nozzle and needle .

User questions & answers

Question:	How can I buy gaskets and packing
Answer:	Refer to seller
Question:	Can I use latex paint with this gun
Answer:	yes. you would have to adjust the settings and the psi depending how thick
Question:	Can it be used to spray stain on a wood project
Answer:	Yes
Question:	Can I spray a truck bed liner paint with this sprayer
Answer:	Yes, berliner spray will need to be thinned a bit though. It wont come out as "textured" as the spray guns the typically are used for bed liner.

Product features

Not Your Average Hardware Store Spray Gun

From primers to tops coats, acrylics to contact cement, and car doors to picket fences and interior doors - PNTgreen 4001S sprays nearly everything on almost anything.

Large Adjustable Fan With Supe

Adjust up to an 11" fan size from an 8" distance, cutting job times and providing clean even coverage that a brush just can't match. (Requires 7-12CFM / 3HP compressor)

Anti-Spill Air Feed Line

Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister.

New Detailed Instructions For

Included manual explains how to set up your air supply, dial in the 4001s adjustable fan size, fan shape, material rate, and paint any substrate successfully.

Product description

An outstanding value in a professional-quality HVLP set to get you professional spraying and painting results. One-year warranty and Satisfaction Guarantee.

• [HEAVY DUTY]: One-piece all-steel gun body, rust-resistant stainless steel nozzle and solid brass cap for durability and longevity.
• [HVLP]: Gravity-feed fluid delivery design works together with three adjustable valve knobs for precise paint application.
• [SPECIFICATIONS]: Operation pressure 40 PSI; Working pressure 10 PSI; Average air consumption 4.5 CFM.
• [MULTI-USE]: Color coded 1.7 mm nozzle size is perfect for clear coat and a variety of automotive and household painting projects.
• [INCLUDES]: 600cc (20.3 fl. oz) aluminum cup with lid, metal air gauge/regulator, cleaning brush and a multi-size wrench for assembly/disassembly.

User questions & answers

Question:	Is the pressure gauge necessary? i am also looking at an astro brand spray gun and none of them include the pressure gauge? thanks
Answer:	Pressure gauges are not necessary if you have some sort of gauge in your air system allowing you to adjust the air pressure. However, having a gauge at the gun will allow better and more consistent control of pressures recommended for the products your spraying, which will help you with achieving the desired results.
Question:	Would this be good to paint a car
Answer:	I bought this to spray primers and it works very well for that task but for bases and clears I'm not sure how it would do. I wouldn't recommend it simply because of the fact that it has a 1.7 mm tip which is too large for bases and even clears so if you do decide to go with this brand gun I'd suggest going with a 1.4 mm tip. I personally own a Finnex FX3000 with 1.4 mm tip to spray base and clear coats and I LOVE that gun. Works great, sprays smooth and the design is awesome, very comfortable in the hand.
Question:	Has anyone used this unit for kitchen cabinet refinishing with Latex Cabinet Paint
Answer:	With the nickel finish you'll generally want paint with thinner, otherwise stuff gets gummy on the inside, use thinner and clean well and you'll be golden. On long work projects I recommend cleaning after 60-90 minutes of use then resuming.
Question:	I plan to paint kitchen cabinets using oil base or alkyd enamel. is 2.0 mm the proper size for this paint
Answer:	I used to use a 1.7 and I would thin latex paint for kitchen cabinets. Makes for a little bit of a finer finish but the 2.0 would work great. Something to consider though, with the experience I have had using over the years with these sprayers they work great, no complaints BUT I recently upgraded to an airless sprayer (a Graco unit from Home Depot). It's definitely a little more expensive on the front end but if you plan to spray anything including kitchens with a little frequency it cut actual spray time down significantly. It took a tenth of the time to spray the same sized kitchen with our graco unit vs the neiko. Good luck!

Product features

Perfect for Home DIYs

The classic high pressure low volume gravity feed fluid delivery design makes paint jobs a breeze. Equipped with three control valves to get the perfect spray you need.

Heavy Duty

The all steel body provides a wonderful rust resistant spray gun and stainless steel nozzle provides great durability.

Complete Set

The set comes with a metal air gauge and regulator for you to know how much air pressure you are getting and includes cleaning brush and multi-size wrench for easy cleanup.

Consistent Application

Each air spray gun is equipped with a fine nozzle size that is perfect for applications and projects around the house.

Easy Clean Up

Comes with aluminum cup with lid to hold 600 cc (20.3 fl. ounces) of fluid at one time without spills.

Tethering Trigger

Spray just the exact pressure and amount you need with easy to use and control tethering trigger style handle.

Product description

DESCRIPTION:

The DYNASTUS siphon-feed spray gun is perfect for spraying oil-based or latex paints, suitable for medium to large size painting jobs in a wide variety of automotive, home, and furniture applications. This spray gun requires 7-12CFM / 3HP compressor, and delivers an adjustable pattern of up to 11 inches and handles lacquer, enamel, stain, primer and urethane. The anti-drip canister helps minimize cleanup.



Kit include:

Extra spanner: Dismantling and installing a spray gun for cleaning

Wire Brush: For cleaning painter nozzle

Handle Tooth Brush: For cleaning paint cup

Filter Funnel - 100 Mesh, stainless steel net: When spraying latex paint, it is recommended to use the filter funnel

Quick Coupler Plug- 1/4-Inch NPT female thread

• Professional quality spray paint gun, perfect for spraying oil-based or latex paints, suitable for medium to large size painting jobs in a wide variety of automotive, home, and furniture applications
• Requires 7-12CFM / 3HP compressor, Using the paint gun reduces over spray and allows you to spray larger surfaces without having to stop
• Separate and adjustable fluid and fan pattern make for more precise fan patterns and less waste
• Hold gun at any angle with various fill levels while maintaining proper suction and without spilling paint from canister
• Includes extra spanner, handle tooth brush, wire brush, 1/4 NTP female plug, 100 mesh filter funnel, making clean-up easy and quick!

User questions & answers

Question:	Can it be used for latex paint for walls
Answer:	I had one that worked great for latex. I ran 60-100 psi air and never thinned the paint. my problem was I dropped the sprayer head and broke the aluminum pickup tube and can't find a replacement
Question:	can you get other spray nozzles for it
Answer:	I don't know about additional nozzles, but the one provided does have an adjustable spray pattern.
Question:	can you get other spray nozzles for it
Answer:	At present, the gun is equipped with only 2.5mm nozzles. If necessary, it will soon be able to supply 1.0mm, 1.8mm, or other size nozzles separately for purchase.
Question:	Will this gun work for water based poly
Answer:	We have not use this gun for this purpose but I assume that it will. We fill the gun with solvent after we pain to clean it up and it sprays the solvent just like paint. The gun is a good value for the money.

Product features

Thin Latex Paint

Quality latex paint is significantly thicker than traditional finishes and must be thinned before it is useful as a spray finish. Insufficient thinning results in the paint coming out of the spray gun in unsightly blobs or not at all.

●While you must thin latex paint with water, the amount of water you must add varies from brand to brand. Higher quality latex paint is thicker, therefore requiring more water; lower quality latex paint is thinner, therefore requiring less water.

●Most paint will require 10% water in latex paint and mixing thoroughly. Never add more than 25% water in any latex paint. Excessive thinning reduces the paint's ability to adhere to and cover a surface.

●Test your paint thoroughly before applying it to a large surface.

• Dicfeos paint sprayer is a versatile HVLP paint sprayer that can be used for both furniture and general home use. The powerful 700-watt motor allows you to paint with minimal filling, giving your work a robust, full look
• 4 different nozzle sizes (1.3mm/1.8mm/2.6mm/3.0mm)which will be enough to allow you to tackle a range of different jobs. 1.3mm-1.8mm-2.6mm nozzle are great for thin paints like sealers and varnish. 3.0mm nozzle is great for spraying latex paint,chalk type paint and milk type paint
• Adjust the air cap to spray horizontal, vertical, and circular at anytime you want. Also you can adjust the flow control knob to quickly increase or decrease the material output, which allows you to control your paint flow to your project needs ( The max flow rate can reach to 1200ml/min )
• The 6.6 Ft power cord is long enough for you to move freely in large work area. Dicfeos paint sprayer with lightweight and handy size fit perfectly in your hand and let you spraying longer without fatigue
• Detachable design means you can wash every part of this paint sprayer easily

User questions & answers

Question:	Can this be used to paint semi-gloss on my window sill
Answer:	Hi, Thanks for your question. Our paint sprayer did a great job with semi-gloss paint.
Question:	Can I get the free mask
Answer:	Absolutely, you can get the mask for free.
Question:	This items can get the durex
Answer:	Hi competitor, We have reported your spiteful attack to amazon. We hope that our competitors can spend more time on products and services to provide a better shopping experience for our buyers.
Question:	What the items included
Answer:	Hi competitor, We have reported your spiteful attack to amazon. We hope that our competitors can spend more time on products and services to provide a better shopping experience for our buyers.

Product features

Dicfeos - 700W HVLP Paint Sprayer

Dicfeos powerful portable HVLP paint sprayer that can be used for both furniture and general home use. It is light enough to be carried in one hand.

The simple controlling mechanism that allows you to control your spray easily. After only a few quick try you will be applying perfect layers of paint onto your favorite cupboard. It comes with 4 nozzle, which means it can use almost any kind of paint, including latex, chalk, cabinet and stain based paint

Why Choose Us?

Using the Dicfeos spraying tool for painting saves time when compared to using a roller or brush. Even with smaller units, you will be able to cover large areas much faster than with traditional methods. Furthermore, you won't have to waste time trying to reach corners and small spaces. Comes with 4 different nozzle size to meet different tasks. The nozzle that blasts out tiny particles of coating to ensure that every corner get covered. It is quite easy to use, even if you are a beginner!

By design, rollers can't offer an even coating. They tend to leave a texture which can end up looking even worse if you don't have experience using one. On the other hand, Dicfeos paint spraying gun provides a smooth finish because it applies materials in fine mist form. This means you won't need to worry about splotches and runs in the material. Because of the way it work, Dicfeos sprayers are a good option for staining steps, furniture, and doors.

How to choose the 4 different nozzles?

- If you need to do some delicate work as spray door or cabinet, you can choose the 1.3mm or 1.8mm noozle and decrease the flow rate. If you want to finish spraying the fence quickly, you can choose the 2.6mm or 3.0mm nozzle and increase the flow rate to max.

How to prevent the nozzles from clogging ?

- Dilute the paint before using. and wash it immediately after painting.

Can I use Latex paint?

- Yes. But you need to dilute the latex at first before spray. Check the usage attention in the package to know more about dilution

Is it friendly to a beginner?

- Yes. It's quite easy to use. But we still recommend you to test it in a bag or on cardboard before spraying a wall or your furniture

Choose The Right Paint Sprayer

If you aren't into expensive equipment but still need a sprayer that gets the job done. Dicfeos paint sprayer will be your best choice. 700W high power, 6.6ft extra long cord, 4 different nozzles and plenty of accessories. All you need is here!

DIFFERENT SPRAY PATTERNS

Turn the air cap to easily adjust the spray patterns to horizontal, vertical and circular. Different patterns to meet different tasks

4 NOZZLE SIZES

Comes with 4 nozzle sizes - 1.3mm / 1.8mm / 2.6mm / 3.0mm. 1.3mm-2.6mm nozzles are great for thin paints like sealers and varnish. 3.0mm nozzle is great for spraying latex paint and chalk type paint

EASY TO USE

The trigger has a simple controlling mechanism that allows you to control your spray easily. After only a few quick try you will be applying perfect layers of paint onto your favorite projects

DO IT YOURSELF

The precision you get with using our HVLP paint sprayer allows you to do a professional level of work at your home. You can paint or protect the doors, individual pieces of wood, dog house, a bicycle or a table, just like a professional would

DETACHABLE DESIGN

Detachable design means you can change the parts and cleaning it with ease. Comes with an extra sponge filter and a whole set of cleaning tools for you

• [EXCELLENT QUALITY] - This paint pressure pot is made of high-quality metal material, has the anti-rust function, and is very durable. All delicate components can be used for a long time.
• [LARGE CAPACITY] - Pressure pots for painting features a 10 liters (2.5 gallons) volume pressure tank, suitable for large capacity paint and industrial applications.
• [SAFETY DESIGN] - Pressure gauge and fluid pressure regulator ensure accurate setting, safety and stability, and long service life.
• [HEAVY-DUTY NOZZLE] - Nozzle of this paint pressure pot is a simple operation, uniform atomization, improved work efficiency, suitable for spraying various solvents and water-based coatings.
• [WIDELY USE] - Painting pressure pot is widely used in automotive, oil-based, latex, varnish, paint, primer, wood coating, adhesive, and other coatings.

User questions & answers

Question:	If using enamel or latex can you paint with having to thin paint. Just pour in pot and spray
Answer:	Depending on how thick your paint is. Normally the paint should be the consistency of a milkshake. It might take several coats to acquire a good finish.
Question:	What is max presser
Answer:	60psi
Question:	Does this have the connection for the quick release for the air compressor
Answer:	No, but it's super easy to add one on.
Question:	What are the internal dimensions of the pot
Answer:	Aprox 9.5 inches across and 9.5 inches down to the flat of the bottom, not to the center of the concave. I have a wood cut out to make mine flat on the bottom.

Product features

Premium Material

Pressure pots for painting adopt thickened watering can design, made of high-quality metal material, corrosion resistance, acid, and alkali resistance. Strong sealing.

Fast And Firm Lock

Paint pot features quick-lock seal system, effective closure, prevent waste of extra paint, energy-saving and environmental protection.

Security Insurance

This 10-gallon pressure pot features a precision barometer, Air pressure adjustment knob, and safety-valve, ensures safe operation.

Flow Regulating Valve

If the flow regulating valve is loose, the oil output will be more and more, and if the flow regulating valve is tight, the paint volume will be thinner and thinner. If necessary, the flow regulating valve can be adjusted to achieve the ideal atomization effect.

High-Quality Nozzle

Nozzle adopts ergonomic design, flexible operation, trigger switch, porous nozzle, more accurate and efficient operation.

Wide Application

Suitable for use in commercial paints or where a large amount of spray is required, such as commercial trucks, vans, buses, or construction and industrial finishing.

Product description

DESCRIPTION:

The DYNASTUS spray gun is a composite gravity feed HVLP spray gun designed to spray all light to medium viscosity materials. Enamels, lacquers, polyurethane, urethane top coats (including basecoat/clearcoat) and all primers can be applied. This spray gun is supplied with a 20 oz. (600 ml) gravity feed cup, with 2.0 mm nozzle. This air regulator will allow you to have precise air control at the paint sprayer for best, consistent results. This paint gun comes in handy when working with small areas or those tight places that are hard to reach with a larger spray gun. It sprays anywhere from 20 - 43 PSI, a good general pressure to start spraying at is 30 PSI.



Kit include:

Extra spanner

Handle Tooth Brush

wire brush

Filter

1/4 NPS female plug

Air regulator with gauge

• Suitable for water-soluble paint and variety of spray paints, dedicated to car repair industry, top quality furniture, and other precision equipment which need fine surface finishing.
• Composite construction for lightweight and comfortable for longtime operation even in winter time, HVLP (High Volume Low Pressure) to get superior finish and save paint
• Air regulator allows you to have precise air control, helping you get the optimal atomization. The stainless steel needles and precision machined air caps, give you a fully atomized and consistent spray pattern for a smooth professional finish
• Built-in 3 ergonomic anodized knobs are perfect for precise control: fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow
• Includes extra spanner, handle tooth brush, wire brush, 1/4 NTP female plug, filter and air regulator, helping you get the best end result

User questions & answers

Question:	have you fixed the regulator issue.You know the fact that it doesn't work
Answer:	The one I revived was bad. I ought a different one for the gun.
Question:	Are different size nozzels available for this spray gun
Answer:	Sorry, it's not equipped at the moment
Question:	I have a 6 gallon compressor 165psi 2.6 scfm 90psi work fine w this gun
Answer:	Yes it will work with this compressor. I have a portor cable 6 gallon 150 with the same spec and it runs the gun fine even constantly. The gun only draws 2-3 cfm. Maybe 4+ if your fan and fluid are wide open. Fan controls most of your air required. The fluid trigger does to a extent. I've even had the compressor cycle off while using it. So it's awesome to use as a portable touch up gun. They make larger cups with it's cup fitting size. it doesn't have to be touch up. One last thing if you don't want a big stationary 220v compressor. What I did to paint is parallel two or three compressors together. Lowe's air tank $60 7 gallons already has the air fitting. Go to any hardware store. By a T air fitting. Connect the two compressors to the T. And either the t to a air receiver or into your using line. Compr seors are cheap used on Craigslist. Or 4.0 crm compressors go on sale $100 all the time. I now use kobalt 26 gallon 4.5, central pneumatic 10 gallon 5.3 cfm at 90 and a porter Cable going into a receiver tank 7 gallons. If they arenot the same psi set the regulator of the higher one to the highest of the other close enough. Every compreseor and tanks have safety relief valves. Much cheaper and portable then 220v I have to roughly 50 gallons at 125psi and 5.3 peak horsepower. Or just not plug in the portor cable and let it be back filled through regulator for extra space and have that at4.3 horsepower and 10cfm at 90 plenty to paint. And in 5 mins it's in and out of my truck. Just make sure you plug each compressor into a separate breaker. Now mostly just use the 2 big powerful ones with the air tank and leave the pancake compressor out. I can paint a call non stop without it. $300 at harbor freight you can get 2 10 gallon 5.3 compressors 7 Gallon portavle air tank from Lowe's and you have a 27 gallon 125psi at 10 cfm@90 or if you have air tank just get a new 1/2npt fitting to be run a regular air fitting. I just prefer it ready to go out the box. The price of a pancake is the same of a good 4cfm compreasor on sale shop around. I've seen people connect 4-5 pancakes together to paint. Just depends on circuitaas long as one compressors safety valve works it works for all of them being connected. I've done this for longer some have been alive worse I've had to do was flip a breaker switch
Question:	Does this gun spray solvent paint
Answer:	Yes, but the paint should be filtered before spraying.

Product description

The DEWALT DWMT70777 Gravity Feed Spray Gun HVLP features a gravity high volume, low pressure design that is well-balanced and lightweight for the user. It offers a 600cc aluminum paint cup with lid, along with a small light weight diaphragm mini air regulator. This unit is backed by Dewalt's 3 year limited manufacturers warranty.

• Gravity high volume, low pressure design
• 600cc aluminum paint cup with lid
• Small, light weight diaphragm mini air regulator

User questions & answers

Question:	does anyone know of a gravity feed gun that will shoot latex without thinning the paint
Answer:	Using the point of the blade, poke a tiny hole in the middle of the bubble using your fingers to smooth the air out. You can also use just a pin to poke a little hole in it. We also have YOUTUBE videos showing how to remove air pockets and other tips.
Question:	Will it spray water based polyurethane
Answer:	It does not peel off after a few months. However you do have to be cognizant of the corners that may get rubbed by passers by. Those edges are more susceptible to coming off. Buy more than you need and be patient in the application.
Question:	Is it 6 gallon air compressor will work with this fun
Answer:	Hi, this marble contact paper is suitable for flat and smooth surface. Please clean up the surface before applying this self adhesive wallpaper.
Question:	What is the tip size
Answer:	Hi, if you find a few air bubbles keep popping up after attached the marble wallpaper, you can just use a tiny needle or the point of the knife to poke the air out lightly, and this will disappear no trace.