10 best rustoleum truck bed coating kit

Product description

Rust-Oleum Professional Grade Truck Bed Liner Kit provides an easy, do-it-yourself solution to protect auto bed liners, terraces, walks, decks, work areas and a variety of surfaces. Premium, ultra durable epoxy kit features cross-linking technology with a convenient burst pouch for simple mixing. Ultimate protection for DIY automotive application with 4X more impact resistance than Rust-Oleum Truck Bed Gallons and extended service life of any truck bed mat.

• Pro grade truck bed kit protects a full 8 ft. truck bed with maximum durability
• Durable epoxy formula offers superior bed liner protection to extend truck service life
• Protective coating covers up to 100 sq. ft. per kit, walk on ready or light duty use after 24 hours
• Cross linking technology creates a premium, impact resistant barrier against rust, water and abrasion
• Easy to apply, textured finish provides anti skid surface for cargo beds, ramps, running boards and more

User questions & answers

Question:	Does this stick to aluminum
Answer:	No primer needed. Just use the scuff pad provided in the kit or sand paper or anything to rough up the paint and apply. I used an electric sander on my truck and it stuck much better than the scuff pad allowed it to
Question:	Can this be top coated with urethane paint
Answer:	We did not use it for the truck bed but for a wood bridge so my horses would not slip going over it. It was warm when we put it on and has lasted fantastic with them walking on it every day.
Question:	Been waiting on this order for almost two months now.. anyone else have this shipping issue
Answer:	Hello. I got this to find out how well it covered. Still unused. If say 4ftx4ft 1/8 inch if I had to guess. May hv to try it out today. It's sunny.

Product description

Truck Bed Coating, Black, Container Size 1 gal., Coverage 140 to 160 sq. ft., Dry Time 4 hr., Textured Finish, VOC Content 619g/L, Application Temperature 55 Degrees F, Application Method Roller

• Auto & Truck Maintenance
• Country of manufacture: United States
• Manufacturer: RUST-OLEUM

User questions & answers

Question:	Can you get it in white
Answer:	I used on the lumber rack for my truck following all the steps and wouldn't recommend you to use it. It doesn't stick to metal very well .I don't think would last under water.
Question:	If applying on plastic fenders (abs / urathane) does it require a primer / base coat
Answer:	Yes, this will be enough material for a pick up truck bumper.
Question:	Is this sprayable with a bed liner gun
Answer:	Per many hours of YouTube videos that were watched before I did my truck cap you should need approx 8 bottles to put the proper amount of coats for the exterior. As for the interior I would say about the same or maybe a little less depending on what your coating. You put it on in thin coats and once mixed the bottles are only good for about 30 mins so you have to be fast and have your area prepped for paint before mixing. Great product. Love the look and texture.
Question:	What's the coverage area per gallon
Answer:	I used 3 full quarts on the inside of my CJ7. I am happy with the product and application plus I have a quart for touch up or adding to high wear areas

Product description

Rust-Oleum Truck Bed Coating Applicator Kit includes: Roller Frame and Roller Cover, Scuff Pad, Brush and Roller Pan

• For use with Rust-Oleum Truck Bed Coating
• Durable abrasion resistant
• Textured finish that forms to the contours of a truck bed
• Stops Rust formula
• Also ideal for running boards, bedrails and more

User questions & answers

Question:	Will this work on plastic? I want to use it for the rook of my golf cart
Answer:	Someone else answered “this paint is designed for metal”, but as an industrial painter, I would argue that this paint would bond amazingly well to wood. The porous nature of wood along with the thick and textured nature of this paint would create a very good mechanical bond when applied. Obviously some woods are more porous than others, so it may adhere to a soft wood like pine much better than a very dense wood like teak. Porosity aside, if you sand the wood very well with coarse sandpaper like 80 grit, you would still achieve an excellent bond. I would not use any sort of primer on the wood prior to application, however, don’t be surprised if the wood soaks up some the initial first coat. Cheers
Question:	what is the nap of the roller in this kit
Answer:	It is solvent based. The main purpose is to ensure oils from one's hands, oils from other processes are removed to ensure good paint adhesion
Question:	Will this work and protect the wood deck on a trailer
Answer:	It is a grease and wax remover, not a paint stripper. I've used it numerous times on cars with CC to remove scuffs and it hasn't affected the paint at all. Wipe it on with one cloth and clean it up with a second clean one. I wouldn't let it sit on the finish unless you are hoping for a bad result.
Question:	So i notice the tools given to apply the liner seem to suck. Does the actual line itself seem to work as intended
Answer:	Sure can. Removes polishing oils for a good wax/sealant bond.

Product description

Truck Bed Coating, Black, Container Size 1 qt. , Coverage 35 to 40 sq. ft. , Dry Time 4 hr. , Textured Finish, VOC Content 619g/L, Application Temperature 55 Degrees F, Application Method Roller or spray'

• Flash point: 31.0 degrees_celsius
• Prevents truck bed damage caused by scratches, rust and weather, while also enhancing your vehicle's appearance.
• Textured finish that forms to the contours of a truck bed
• Stops Rust formula
• Able to be rolled on or brushed on
• Also ideal for running boards, bedrails and more

User questions & answers

Question:	can this be painted or coloured readily
Answer:	Yes
Question:	How much prep work has to be done before application
Answer:	You just have to stir it up and use. No additives to mix in.
Question:	Does this product require a hardener? Can it be reused after opening
Answer:	Ye. but You still have to sand it a little so you can apply it correctly.
Question:	How well will this hold up for the interior of a jeep? Thanks
Answer:	Someone else answered “this paint is designed for metal”, but as an industrial painter, I would argue that this paint would bond amazingly well to wood. The porous nature of wood along with the thick and textured nature of this paint would create a very good mechanical bond when applied. Obviously some woods are more porous than others, so it may adhere to a soft wood like pine much better than a very dense wood like teak. Porosity aside, if you sand the wood very well with coarse sandpaper like 80 grit, you would still achieve an excellent bond. I would not use any sort of primer on the wood prior to application, however, don’t be surprised if the wood soaks up some the initial first coat. Cheers

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Truck Bed Coating Applicator Kit, Includes Roller Frame And Roller Cover, Scuff Pad, Brush And Roller Pan

• Auto & Truck Maintenance
• Country of manufacture: China
• Manufacturer: RUST-OLEUM

User questions & answers

Question:	Can this be used for outdoor tables? Will it tolerate the sun and weather
Answer:	The ivory is a cream color as pictured. We make every attempt to give you a good representation of the available colors for each product sold, but unfortunately we cannot guarantee an exact match. Dye lot variance of 1 to 2 shades is considered normal.
Question:	Does it containes vinyl
Answer:	If you're putting this on a 60" round table then you can seat 8-10 people. If you're using this on a 72" round table, then you can seat 10-12 people. We hope this is helpful!
Question:	what is the thickness of the tablecloth ? Can you show a picture of the package
Answer:	Yes, it does have glue.
Question:	Can this be trimmed down to size
Answer:	Comes with directions but they’re not very good. Basically your making a patch.
Question:	Can i order a free swatch
Answer:	There is a helpful video on youtube that shows you step by step of a guy who uses it and bonds his front teeth really works... I used it and fixed a chipped broken front tooth works like a charm good stuff if you can figure out how to use it, once you get the hang it works like a charm...Amazon won't let me post the link youtube If you cant find the video on youtube type into Youtube 'Bobbys Worlds Prime Dent' type it exactly how you see it He shows you step by step how to use it and you're right it doesn't come with any instructions but the youtube video was supreme..
Question:	Can i cut a slit in it to run a few cables through the top without it destroying the facade
Answer:	If it is removed by brushing then what is the purpose of this product. Is this a joke?
Question:	So i have a 5ft table and was wondering if anyone has tried this on one since they dont make it for this size
Answer:	Se quita apresionandolo con el mismo ganchito plateado el se va poniendo amarillo y si comes caliente se va desgastando pero funciona jenial
Question:	Is this cover open on the backside so I can sit at it at a craft show for my booth
Answer:	I don't know, it just to create a temporary tooth to use until you get one made from your dentist or for emergency repair until you get to a dentist. You should seek professional help for a cavity to protect your tooth.

Product description

Rust-Oleum Automotive Professional Grade Truck Bed Coating offers a high-performance, multipurpose coating capable of protecting truck beds and other vehicle parts from corrosion and wear. Premium 2-in-1 paint and primer spray helps easily cover hard-to-paint curves and cervices with exceptional resistance to chips, fading, chemicals and abrasions. Easy spray on application produces an even, textured non skid finish.

• Ideal for protecting trucks beds and other automotive metal from corrosion and wear
• 2-in-1 paint and primer offers excellent protection from rust, fading, chipping, impact, abrasion and more
• High performance coating dries in 1 hour and covers up to 7 sq. ft. per can
• Durable rubberized coating delivers long lasting protection and maximum adhesion
• Creates a textured coating with non-skid finish

User questions & answers

Question:	If the roof basket have rust , do i need to use rust reformer first before apply bedtruck
Answer:	We work hard to make sure our products are safe to use in homes with pets. We just recommend ensuring the fabric is completely dry before allowing your pet to lay on it again.

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Herculiner brush-on truck bed liner kit includes the following: one gallon of ready-to-use protective coating, one application brush for tight spots and corners, two rollers for easy/even application, one roller handle, and one abrasive pad to prepare truck bed. It has polyurethane and rubber granule coating that is applied in just 3 easy steps to the bed surface using the rollers and brush included with the kit. When cured, it provides a durable skid-resistant protective coating. Because it can bond to virtually any surface or material, Herculiner can be applied to wood, metal, concrete, aluminum, asphalt, rubber, fiberglass, and most plastics, including PVC.

• Herculiner, brush on bed liner Kit, includes 1 gallon of ready to use Black protective coating, application brush, 2 rollers for easy & even application
• Adds Extra shine to your product
• Manufactured in China
• Apply to metal, concrete, wood and more
• Tough, textured polyurethane protective coating
• 5 times thicker than other roll-ons
• Skid resistant surface which wont chip, flake, or peel

User questions & answers

Question:	I have a 2001 Dodge Dakota sport Ext, Cab w/ 6-1/2 ft' bed. I want to do the bed, sides and tail gate. Would 1 gal. be enough
Answer:	If your 2021 2.7L has a 5" exhaust the tip will fit on it. I doubt the 2021 2.7L has a 5" exhaust from the factory.
Question:	Can I do a recoat over my old herculiner
Answer:	If your ram 1500 has a 5" exhaust on it the tip will fit.
Question:	is Herculiner the same exact product as Rhino liner? Is Herculiner better than Line-X
Answer:	Yes , I applied it to my exhaust and mufflers !!!!!
Question:	How much coverage
Answer:	I have had on header on a atv for 6 months and still looks like new so I have to yes

Product features

Herculiner Brush-on Bed Liner Kit

Herculiner Brush-on Bed Liner is a polyurethane-based product that is designed to be easily applied to any truck bed with great results. It is important that you follow the application instructions as closely as possible. Any deviation or deletion from these application instructions may have a negative effect on the end results. Be sure to read all instructions and warnings completely before beginning.

Product description

Truck Bed Coating, Black, Container Size 15 oz. , Coverage 15 to 20 sq. ft. , Dry Time 60 min. , Application Temperature 50 to 90 Degrees F, Application Method Spray

• Auto & Truck Maintenance
• Country of manufacture: United States
• Manufacturer: RUST-OLEUM

User questions & answers

Question:	How many cans is this
Answer:	Doubtful.
Question:	How would this work on a roof rack
Answer:	No cover for playpen
Question:	How many cans of paint do I need to do a 6 ft truck bed
Answer:	Sure
Question:	Can I use this on wood
Answer:	Yes, you can connect two sets of pen together to make one large pen.

Product description

Rust-Oleum Truck Bed Coating provides an easy solution for recoating and restoring worn, unfinished or previously finished metal truck beds. Designed with Stops Rust protection, the non-slip coating offers a fresh new look for your vehicle with excellent durability through the seasons. Apply on any metal truck bed or other metal trim including running boards, bedrails and more for a premium finish.

• Creates an attractive liner that prevents damage caused by scratches, rust and weather with a durable, protective coating
• Truck bed liner in a fast dry, water-based formula forms to the contours of the truck bed and protects with ultimate rust and abrasion resistance
• Dries to touch in 1-2 hours and covers up to 40 sq. ft. per quart
• Truck bed paint is easy to apply by spray, brush or roller to recoat or restore any metal truck bed
• Create a custom truck bed mat on painted or bare metal with a non-skid, textured finish

User questions & answers

Question:	This product it's water safe after it dries
Answer:	Metallic silver? Doubt it...just the color.Hi-Heat CoatingTo finish off a clean and well-protected Exhaust Insulating Wrap application it is recommended to use the Hi-Heat Coating.The coating will protect the wrap from abrasion and harmful liquid spills. Extra resins and binders toughen the surface, extend the life of wrap by protecting it from friction, and seals the pores to minimize the penetration of harmful liquids. Hi-Heat Coating can handle direct and continuous heat of 2000 degrees Fahrenheit when used with ThermoTec Exhaust Insulating Products.The coating also works excellent as a paint directly on metal surfaces and can handle continuous temperatures up to 1200 degrees Fahrenheit.
Question:	I ordered the application kit, and two quarts of the product...do I just mix and use or is there an additive or catalist that must be mixed in it
Answer:	No, it will look like shiny silver paint.
Question:	Can this be applied on top of the original paint
Answer:	After you wrap.
Question:	Can this be used on wood
Answer:	Yes. According to DEI it's safe to use on all exhaust system alloys except for actual Titanium exhaust systems, which is heller expensive and not common. All but 1 header I've put on my 4 cars( 2 V-6's, an I-4 & turboed I-4) and the 5 Jeeps(1 w/old 4.2L I-6, 3 with 4.0L HO I-6, & a 4.7L V8) were made of either 14 or 16 gauge T-304 Stainless Steel, only had 1 that wasn't & was a mild steel(never use 1 made of anything but SS or Titanium!!!). Ever since that header, I vowed I'd only use a Stainless Steel header from then on, lol. It cracked just like the plagued/known to crack factory I-6's exhaust manifolds, it just took about 7K-10K miles more(so not worth the $). Most headers I've seen(like 95%) are stainless steel anyway, and so are many aftermarket cat & axle back exhaust systems.

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.

Product description

Rust-Oleum Automotive Truck Bed Coating Spray is a textured finish that forms to the contours of a truck bed. For recoating and restoring worn, unfinished or previously finished metal truck beds. Helps prevent truck bed damage caused by scratches, rust and weather. Also ideal for running boards, bedrails and more. Use outdoors or in a well-ventilated area.

From the Manufacturer

Rust-Oleum Truck Bed Coating is an easy to use spray on coating that provides a durable, abrasion resistant, textured, non-skid finish to truck beds.

• Ideal for use on truck beds, trailer floors, fenders and other metal surfaces
• Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places
• Dries to the touch in 1 hour and covers up to 20 sq. ft.
• Offers superior durability and can be used on bare or primed metal truck beds
• Textured non-skid finish is resistant to scratches and the outdoor elements
• Conforms to the exact shape of the truck bed
• Reduces road noise

User questions & answers

Question:	How is the odor/fumes? I plan on using this in a engineering lab to paint some machines and the ventilation isn't the best
Answer:	About the same as any spray product like paint or under coating.
Question:	Will this adhere to wood as well. Would consider using this on the ramp of my toy-hauler
Answer:	If you can get it to spray it will. This product is crap and has been for years. Read some of the one star reviews. They speak the truth. Try DupliColor spray bed-liner. It is far superior.
Question:	Could this product be used as a floor covering for a mop room
Answer:	no too abrasive
Question:	Could this be used to paint a small sub box
Answer:	well as long as its metal i think you should be fine but wood i really could not say

Product features

Truck Bed Paint and Protection

The premium selection of Rust-Oleum Truck Bed Coating products provides a fast and practical way to extend the longevity of vehicles. Whether it's to keep new trucks looking their best or to revitalize rusted, weathered beds after years of use, these rust-resistant formulas ensure exceptional protection from the elements and wear. Versatile paints can also be used on fenders, step areas, trailer floors and more.

Attractive Finish That Extends the Life of Truck Beds

Weather, rust and wear can cause major damage to truck beds over time, shortening their usable life and leaving unsightly marks. Rust-Oleum truck bed coatings all contain the powerful Stops Rust formula to halt corrosion and protect vulnerable metal from moisture. Specialized textured paints also include fade, chip, and scratch resistance to ensure that surfaces stay sealed and attractive through harsh conditions.

Use on new truck beds to ensure they stay in top condition or on old, worn beds to restore them to like-new quality.

Aerosol

Spray on aerosols go on fast and make it easier to create a uniform, drip-free finish. They are ideal for coating tight spaces, corners and curves where brushes may have trouble reaching.

Brush-On

Traditional quarts or gallons can be used with a brush, roller or paint spraying system. They allow for more direct control during application and offer greater total coverage per can.

Clear Coat

Clear coats allow for the same degree of protection as opaque coatings while still letting the beauty of the original surface show. Great for keeping new truck beds looking their best.

Remove Paint and Rust

Remove any loose paint or rust from surface. For better final coat adhesion, lightly sand surface with medium grit sand paper.

Thoroughly Clean Surface

Remove all dirt, grime, grease and residue from area to be painted. Allow to dry completely.

Mask Off Areas

Use painter's tape and coverings to mask off areas that you do not want coated. This will help avoid overspray errors.

Apply Paint

Using method indicated on label, apply 2-3 light coats. Refer to full instructions on can for recoating times.