10 best latex paint removals

Product description

The Smart Strip Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior/exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.

From the Manufacturer

The Smart Strip™ Advanced Paint Removal System is an Eco-friendly 100% biodegradable, water-based paint stripper that is extremely effective for removing multiple layers of architectural and industrial coatings from virtually all interior / exterior surfaces such as wood, brick, metal, concrete, stone, plaster and most fiberglass and plastics.

• This product adds a great value
• Safe for user, substrate and environment
• Removes multiple layers
• Does not contain methylene chloride, any caustics, or toxic chemicals. It is odor-free and safe for the environment
• This paint stripper is exceptional for the safe removal of lead-based paint and is excellent for intricate, carved, or molded surfaces
• It is also outstanding for removing marine paints without damaging the gel coat
• Because it is a paste, the Smart Strip Advanced Paint Remover paint stripper can easily be applied by brush, roller or conventional airless sprayer

User questions & answers

Question:	has anyone use this in a sprayer
Answer:	I believe it is 90% Perchloroethylene. So, no it is not ammonia based. http://docs.crcindustries.com/msds/5090.pdf
Question:	how does it do on wood
Answer:	The red gallon is the more EPA-sensitive chlorinated version, the only size of it available in NJ. Only the green non-chlorinated formula is available here in the aerosol-spray size.
Question:	How many gallons would be needed for a 26 ft boat with a 10 ft beam
Answer:	I bought this before. It is only 1 container, which is one gallon size.If it was a case of 4 containers it would be a steal at that price
Question:	does it work on brick which has latex paint on it
Answer:	NO, this CRC 05090 product is not safe to use for cleaning before welding, heating or exposing to a flame. This product is a chlorinated solvent, Tetrachloroethylene aka Perchloroethylene and even when apparently dry rapidly decomposes into Hydrogen Chloride and/or Phosgene gas/vapor (chemical warfare weapons agents) when exposed to heat and/or flame, which are highly corrosive, toxic, damaging to human tissue, health and can be fatal.

Product description

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

From the Manufacturer

Smart strip is a revolutionary paint remover that is safe for the user, any substrate and the environment. It is formulated without methylene chloride and is non-carcinogenic, non-toxic and non-caustic. This water-based stripper will effectively remove up to 15 coats of virtually any coating like oil-based, water-based, acrylics, varnishes, urethanes even old lead paints from interior or exterior surface of wood, brick, stone, concrete, plaster, metal, plastic, glass, fiberglass, etc. Smart strip has zero VOCs, is odor free, user friendly, 100-Percent biodegradable and pH neutral. This is a water-based paste that is easily applied by brush, roller or conventional airless spray. Allow the paste to dwell on the coatings for 3 to 24 hours, depending on the number of coats and the type of coatings being removed. It is formulated to remain wet and effective over extended periods of time and does not require the use of Peel Away Paper. After appropriate dwell time, remove the paste and the softened/lifted paint using a scraper. Any remaining residue can be removed with a sponge and water or a power washer. There is no need to neutralize the stripped surface. Available in 1-quart can.

• Biodegradable formula
• Safe for user, substrate and environment
• Removes multiple layers
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic
• Odor free water based advanced paint remover
• Formulated without methylene chloride and is non-carcinogenic

User questions & answers

Question:	has anyone use this in a sprayer
Answer:	It can be sprayed. Best to use a commercial sprayer. You will need to remove all the filters and use a .031 tip size.
Question:	how does it do on wood
Answer:	It does very well on wood. Unlike some other environmental strippers like Peel Away 7 it isn't highly alkaline and doesn't require being neutralized, and thus there is no danger of darkening the wood. The #1 choice for wood in my opinion, and I have tried virtually everything. (One tip--cover the stripper with wax paper, plastic, etc. while you let it work so it doesn't dry out. Let it work overnight for maximum effectiveness.)
Question:	How many gallons would be needed for a 26 ft boat with a 10 ft beam
Answer:	I think you would need to ask to buy it by the barrel! We stripped both sides of a standard door and used over a gallon. There were many layers of paint, but you also have to put it on thickly for it to work properly. I would contact the manufacturer for suggestions on stripping a boat.
Question:	does it work on brick which has latex paint on it
Answer:	Yes it works great on stripping latex paint from brick interior or exterior.

Product description

Take the frustration out of paint removal and surface prep with the Wagner Paint Eater. This unique tool is designed and optimized to remove peeling paint without damaging the substrate, allowing for a smooth, long-lasting new coat of paint. The special fiber disk with embedded abrasive effectively removes paint chips without clogging with paint and dust. The Wagner Paint Eater has received the Member Tested and Recommended and the Contractor Tested and Recommended Seal from the Handyman Club of America. This is an independent group that tests and rates products. At least 2 out of 3 testers must recommend this product in order to earn the seal.

The Wagner PaintEater is a one-step paint remover that's aggressive on paint but gentle on siding and trim. Included in the system are the PaintEater machine and 3M spun-fiber disc, which work together to get rid of paint, feather rough edges, and smooth the surface of wood, masonite, steel, or concrete. In just one step the PaintEater eliminates the time-consuming, labor-intensive chores of traditional exterior-paint prep and ensures that your new paint will go on smoother, adhere better, and last longer.

Quickly and Easily Prep Your Home's Exterior

Painting a home's exterior is a big project, but one that pays off in curb appeal as well as protection for your home. The first and most tedious step in painting your home is to get rid of loose or flaking paint and to prepare a smooth surface for a fresh coat. The PaintEater is an award-winning tool from Wagner Spray Tech and 3M that will help make quick work of this process.

The Wagner PaintEater was awarded the Handyman Club of America's Member Tested and Recommended Seal and Contractor Tested and Recommended Seal.

Aggressive on Paint, Gentle on Siding and Trim

The Wagner PaintEater aggressively removes paint but is easy on underlying substrate. With the PaintEater you can prepare most outdoor surfaces, including wood and masonite siding, concrete, and steel. The machine's powerful, 3.2-amp motor delivers 2,600 RPM for removing even the most stubborn pain, paint oxides, and mildew; this optimal rotary speed gives just the right combination of performance and control.

Flex-Disc System for Precise Results

The PaintEater combines a high-powered machine and a tough 3M spun-fiber disc with high-performance abrasive embedded into the fibers. Together they provide you with speed, power, performance, and control, so you don't have to worry about damaging surfaces.

The PaintEater's innovative Flex-Disc System allows the disc to conform to surfaces for precise results around flat trim and siding. The disc can be operated on its edge--to remove stubborn paint chips--or flat--to smooth or feather edges. The outer edge of the disc is ideal for preparing the surface underneath lap siding. The disc's compact size--4-1/2 inches--allows you to access tight corners; its open-web design minimizes buildup of paint and dust and allows the disc to easily glide over screws, nails, or sharp edges without damage.

Removing the disc is just as simple as using it--no tools required. Simply engage the arbor lock and unscrew.

Ergonomic Design Provides Comfort and Safety

The PaintEater is ergonomically designed to allow for multiple hand positions and to ease hand fatigue. It can safely be used with either the right hand or left hand, and the retractable handle and soft-grip cover allow you to easily switch between one-handed and two-handed operation. And even with its rugged, glass-filled polypropylene body, the PaintEater is lightweight enough for you to carry from job to job.

A shroud design at the base of the unit ensures that your hands stay safely away from the disc during operation. For added protection, the PaintEater features a Velcro strap for securing the tool safely to your hand when working on a ladder, rooftop, or when you just need extra leverage. For peace of mind, a silicon boot protects the on/off switch from dust and moisture.

The Wagner PaintEater is backed by a one-year limited warranty.

What's in the Box

Wagner PaintEater and 3M disc.

From the Manufacturer

The Wagner PaintEater 4-1/2 in. Disc Sander is tough on paint but gentle on the surface. The high-performance, spun-fiber disc operates at 2,600 RPM to provide the proper combination of disc performance and user control and features an open-web disc design to minimize paint and dust build-up. Use the sander on its edge to remove paint chips, or operate it flat for smooth, feathered paint edges that create an ideal surface for repainting.

• A Velcro strap for a secure hand position & ladder work
• Arbor lock for tool-less disk replacement
• Innovative, contour conforming FLEX-DISC System

User questions & answers

Question:	What is the circumference of the body of this tool? Can a woman with smaller hands use this comfortably? Thank you
Answer:	I'm sorry but I've never tried it on PVC but I can say that it does get really hot when shrink wrapping. My guess though is that it will provide enough heat for thin walled PVC pipe.
Question:	This only mentions "exterior" Can it be used with this pad to strip stairs, bannister trim? 3M-Scotch-Brite-Contour-Surface-9413NA
Answer:	I don't see why it wouldn't. The heat shrink/solder butt-splice connectors I've been using recently specify 80 C to melt the adhesive and 138 C to melt the solder. Most regular heat shrink tubing takes a lot less than 80 C to shrink it. I've been using the Recollections heat embossing tool I "borrowed" from my wife's crafting stash to repair some broken wires in my truck and it worked great for the heat shrink and the shrink/solder butt-splice connectors, although on the larger connectors with more solder, it did sometimes take an extra minute or so, but still worked without issue. As the Homidic Mini Handheld Hot Air Gun in this listing has similar wattage specs, I'd think it would do as well or maybe even better as the nozzle looks a little smaller on this one and it claims to reach 200 degrees (I assume Celsius as most heat guns seem to state temps in Celsius first).
Question:	I have a large old barn with peeling red paint...will this stripper remove the peeling paint
Answer:	wire heat shrink? takes a bit
Question:	How to fix disengaged disc from shaft? I love it!!! Bought two and they broke the same
Answer:	I haven't sealed bubble wrap, however, I've used it to seal shrink wrap. It does well but after a min of usage it won't come back on until it cools down. So if you have a bunch of items to seal you may want to get a higher wattage heat gun.

Product features

Easily Prep Your Deck for Refinishing

The Wagner PaintEATER is an electric palm sander that efficiently strips away flaking finishes, leaving you with a smooth surface to apply a fresh new coat. Prepping your deck, fence or home exterior with the PaintEATER allows for the new coat of paint to adhere better, giving you a longer lasting finish.

Aggressive on Paint, Gentle on Siding and Trim

The PaintEATER features a high-performance, spun-fiber disc that operates at 2,000 RPM to easily remove chipped finishes on wood, Masonite siding, concrete, steel and more. The disc conforms to surfaces and provides ultimate control so you don’t have to worry about damaging delicate areas.

Ergonomic and Effective Design

The PaintEATER’s ergonomic design allows for multiple hand positions to reduce hand fatigue. Plus the sander features a retractable handle and soft-grip cover to easily switch between one or two handed operation.

Decks

Refinishing your deck this summer? Quickly remove the old finish by using the PaintEATER.

Exterior Siding

Remodeling a home exterior can be a big task. Make your job easier by using this orbital sander.

Trim and More

The PaintEATER can also be used to remove old finishes on small areas like trim, furniture, shutters and more.

Product description

1

• Best Seller Edition
• 3 Scotty Peeler Original SP-1 and 1 Metal Blade SP-2 with 2oz Goo Gone Original; Removes Stickers, Labels, Price tags

User questions & answers

Question:	Will this remove spray paint that's been sprayed on my truck
Answer:	It's more in the taupe family than grey.
Question:	Can I use stickers on a wood? like dresser or table
Answer:	legs about one foot high quality chair
Question:	Can this remove 3M adhesive & metal plate [magnetic car mount] from the back of an aluminum phone? (Nexus 6P
Answer:	about a foot up, great quality chair
Question:	Would this help get gun of my car
Answer:	It is foam I think you can't see it or take the cushion out has springs built under inside of it I can tell that I believe it is quite solid I actually love this chair hope that helps

Product description

3M Paint and Rust Stripper 7772ES, 4in, Open Stock, One. For use on wood, metal, plastic or fiberglass. Cleans rusty surfaces with a double thick edge to strip quicker. Features Scotch Brite abrasive web that won't rust or splinter like wire brushes. Conforms to surface contours, reduces gouging and leaves a smooth paintable surface. Fits all standard household drills: 1/4 inch, 3/8 inch and 1/2 inch. Use as a rotary disc (on face) or as a brush (on edge).

From the Manufacturer

3M Paint and Rust Stripper easily removes paint from wood and metal surfaces. Cleans rusty surfaces and has a double-thick edge to strip quicker. Features Scotch-Brite abrasive web that will not rust or splinter. Fits all standard household drills.

• Heavy duty automotive rust and paint stripper
• Attaches easily to a standard electric drill
• Double-thick scotch-bright web strips quicker
• Lasts longer and cuts faster than conventional sandpaper
• Conforms to surface contours

User questions & answers

Question:	What is the width
Answer:	It helps remove multiple layers of paint, both latex, and oil-based paints. It quickly removes polyurethane, epoxy, varnish, and shellac from wood, metal, and masonry surfaces. The thick, brushable paste clings to vertical surfaces without runs or drips. This paint remover does contain methylene chloride, a patent-pending formula less toxic, and no severe working conditions for the employees. Application: Pour into a metal container and apply a thick coat on with a paintbrush. Brush in one direction only. Leave the area and let the stripper do the work at least 15 minutes, before test scraping. If the finish is ready to be removed, scrape it off with your putty knife.
Question:	Can you use this to remove pool calcium buildup on tiles
Answer:	no
Question:	The description says 11inches, and the photo shows 4 inches... Which is it
Answer:	The container only states don't use on plastic, linoleum, rubber or sheet rock/ plaster. I'm using it for wood, glass and formica countertops. Hope this helps. You may need to email the company for the best information. Cheers Michael
Question:	What is the difference between the 7772ES and the 7771? Is one coarser or something else
Answer:	we have used it on wood to remove almost everything except marine grade. We even used it on brass so making a guess it might

Product description

A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces. KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint. Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents. This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon. Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray. KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good bonding primer is essential to ensure that topcoats adhere to tough-to-paint surfaces. High adhesion primer increases painting possibilities by bonding to a wide range of surfaces.
• KILZ Adhesion is a unique latex primer developed to bond securely on slick surfaces where a traditional water or oil-base primer will not adhere. Viscosity - 93 - 100 KU. Roller - Smooth Surface - 3/8 - 1/2 inch nap.Roller - Porous Surface - 1/2 - 3/4 inch nap. Spray Pressure - 2,500 - 3,200. Spray Tip -.015 - .021 inches
• Bonds to tough-to-paint surfaces including Kynar, PVC, Formica, vinyl, glass, tile, glazed brick, chalky paints, glossy finishes, fiberglass and metals. Topcoat with either latex or oil-based paint.
• Use on most interior and exterior surfaces where a secure bond is critical. This problem solving primer can be used under epoxies, lacquers, and products containing Xylene or other solvents.
• This is a 1-gallon can of KILZ Adhesion High-Bonding Interior/Exterior water-based Primer in white. Covers approximately 300 square feet per gallon.
• Use on properly prepared surfaces free of dust, grease, chalk, mold, rust and peeling paint. Mix well before using. Apply with brush, roller, or spray.
• KILZ Adhesion dries to touch within 30 minutes and ready to recoat in an hour.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Can i use kilz adhesion as a primer over sheetrock when i am going to tile over? vs sanding the paint and tiling
Answer:	Probably. But one f the knobs broke off mine the second time I used it. I sent it back!
Question:	Can you use this as a vinyl tile floor primer
Answer:	Sorry, really not sure. Mine are all assembled already, (which was easy to do) but I can tell you we love these chairs!!!
Question:	I am looking to paint over semi gloss paint on a stairwell without having to degloss or sand the entire area. Is this the correct product to use
Answer:	it is clear & smoke
Question:	Has anyone used this primer over ugly granite then painted the vanity? Also what type of paint and sealer did you use over it
Answer:	The weight capacity is 275 lbs.

Product description

Smells strong because when you work hard, you get smelly.  Goof Off Pro Strength Remover works the first time quickly and easily removing tough spots and stains, like chewing gum, that ordinary household cleaners can’t.  Removes: adhesives & glue, crayon, pen & marker, gum, scuff marks, stickers & decals, asphalt & tar, dried latex paint, duct tape, caulk, tree sap, candle wax and more.  Ideal for all kinds of hard surfaces such as metals, glass, brick, wood, concrete, grout, fiberglass, hand tools and most automotive surfaces.  Comes in a wide array of sizes including aerosol.  Warning: This product can expose you to chemicals including Ethylbenzene, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or other reproductive harm. 

From the Manufacturer

Everybody goofs up sometimes which is why every home, garage and workshop needs Goof Off. It removes the tough messes that ordinary household cleaners can’t. You'll be amazed at how fast, easy and powerfully it works to remove everything from dried paint to gummy, sticky messes, grease, tar, ink and tough stains. Goof Off is the solution to irritating, embarrassing and potentially costly cleaning problems. Goof Off – the ultimate remover for the toughest messes.

• Goof Off Pro Strength Remover works the first time quickly and easily removing tough spots and stains, like chewing gum, that ordinary household cleaners can’t
• Removes: adhesives & glue, crayon, pen & marker, gum, scuff marks, stickers & decals, asphalt & tar, dried latex paint, duct tape, caulk, tree sap, candle wax and more
• Ideal for all kinds of hard surfaces such as metals, glass, brick, wood, concrete, grout, fiberglass, hand tools and most automotive surfaces
• "Smells strong because when you work hard, you get smelly."
• WARNING: This product can expose you to chemicals including Ethylbenzene, which is known to the State of California to cause cancer, and Methanol, which is known to the State of California to cause birth defects or reproductive harm.
• Cuts through the toughest spots and stains quickly
• Use it to eliminate costly messes and mistakes around the garage, workshop and home

User questions & answers

Question:	I have finished hardwood flooring, and there seems to be glue or gum that is stuck on top. Can this remove the glue without damaging hardwood finish
Answer:	I have a popcorn ceiling so I can't say for sure if it would work on a smooth surfaced sheetrock.
Question:	Will it remove super glue from a laminate counterttop
Answer:	This product did not work well for me. It was too think and did not repair scuff or chip marks as I had hoped. I would not use this to paint a whole ceiling. I would buy standard spray paint.
Question:	What gloves should I wear while using it? I see that it contains both xylene and acetone
Answer:	David--I don't think the cover-up spray kills mold. Check out Rusto-leum's site: http://www.rustoleum.com/product-catalog/consumer-brands/zinsser/primer-sealers/covers-up-ceiling-paint-and-primer-in-one
Question:	Can this be used on an automobile without harm to the paint finish
Answer:	Yes, I used it on ceiling tiles, which are flat white. Worked great!

Product features

Goof Off is the best!

Using proprietary chemistry, Goof Off products clean what ordinary household cleaners can’t—grease, glue and grime, crayons, adhesives and virtually every tough cleaning problem you’ll ever encounter.

Product description

The 3M Half Facepiece Reusable Respirator 6000 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved cartridges and filters. When properly fitted and used with approved 3M cartridges and filters, this respirator can help provide protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The swept back design of the cartridges helps improve balance and visibility. Remarkably comfortable, soft, lightweight facepiece has easy-to-adjust head straps that allow for a customized fit to the user. Replaceable cartridges help reduce waste and costs over time. NIOSH, a Federal government regulatory agency, has tested and approved the 6000 Series Half Facepiece with certain 3M cartridges, filters and supplied air systems. The 6000 Series is NIOSH approved for negative-pressure air purifying and positive-pressure dual airline applications. This half facepiece respirator may be used with 3M Cartridge 6000 Series; 3M Filters 2000, 2200, 7000 or 5000 Series; or 3M Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals. Some applications include: assembly and mechanical, chemical clean-up, chemical handling, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance, mining, etc. Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M Half Facepiece Reusable Respirator 6000 Series helps reduce exposure to many contaminants. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. In Canada, call. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and limitations. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

• Comfortable: Soft, Lightweight face piece with easy to adjust head straps for a customized fit
• Durable and Reusable: Respirator can be disassembled, cleaned, and reused; Supplied with reclosable storage bag
• Helps reduce exposure to particulates and a wide variety of gases and vapors when used with approved cartridges and filters
• Use With Other Ppe: Adjustment points located on face piece for improved compatibility with other personal protection equipment
• Applications: Chemical Handling, Chipping, Chiseling, Cleaning, Grinding, Machining, Masonry, Painting, Sanding, Sawing, Welding, Construction, General Manufacturing, Industrial Maintenance
• Compatible: Bayonet connection is compatible with all 3M Bayonet style cartridges and filters
• NIOSH approved for negative pressure air purifying and supplied air dual airline applications
• For industrial/occupational use only; Not for consumer sale or use

User questions & answers

Question:	Does this mask with what filter, protect from carbon monoxide
Answer:	which 3m respirator( 6100/0702 AAD ) replacement filters can be used
Question:	come with filters
Answer:	Filters are typically for dust, powder, sand...particulate matter while Vapor cartridges would be able to protect you from organic vapors like paint fumes, cleaning chemicals, evaporating gasoline. If you are doing home projects I would get the 3M 60923 or the 60926, both of these cartridges have a built in P100 particulate filter. Vapor cartridges will not protect you from smoke or carbon monoxide, I would also advise that you stay away from ammonia to.
Question:	Looking for a mask for home rennovations. What is the difference between filters and vapor cartriges? Do i need both? If so can you buy the whole set
Answer:	Yes for protection against asbestos according to the manufactures product guidelines.
Question:	Does this work against asbestos
Answer:	Yes, Part # 3M 6885. Hope this helps! National Wholesalers

Product features

Step 1

Place the respirator over your nose and mouth with bottom straps unfastened.

Step 2

Pull the top strap over your head, placing the head cradle on the crown of your head.

Step 3

Hook the bottom straps together behind your neck.

Step 4

Adjust strap tension to achieve a secure fit. Pull the ends of the straps to adjust the tightness beginning with the adjustment points at the top of the respirator and then moving to the adjustment points at the back of the neck. Do not over-tighten. Strap tension may be decreased by pushing out on back side of buckles.

Using Particulate Filters

Place your thumbs over the center of the filters and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Cartridges

Place the palms of your hands over the cartridges and inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal of the respirator, reposition it and adjust the straps for a more secure seal.

Using Hard Case Particulate Filters

Squeeze filter covers with hands toward facepiece to restrict airflow. Be careful not to disturb the position of the respirator. Inhale gently. The facepiece should collapse slightly. If air leaks between the face and the faceseal, reposition it and adjust the straps for a tighter seal.

Product description

CS Unitec’s EOF 100 paintshaver efficiently and effectively removes up to 5x faster than sander tools on a variety of materials from wood, plaster, concrete, metal and more. The EOF 100 removal tool includes: electronic soft start, ergonomic soft-grip/non-slip handles, and upgraded adjustable dust guard that allows for stripping stably right to the edge of a surface. Precise depth adjustment to 1.0mm for material removal without milling into the substrate. 2 types of replacement carbide milling discs available (Wood/Softer Materials P/N 37124000 For Concrete/Harder Material P/N 37125000). This paint stripper removes varnish, paint, graffiti, resins, coatings, solids, sprays and greasy dirt from wood, plaster, concrete, and other surfaces without unhealthy odors or exposure to hazardous chemicals. Specifications: Weight: 7lbs Load Speed: 10,000 rpm Spindle Connection: M14 male Included Components: 1x EOF 100 Paint Peeler, 1x Case, 1x Assembly Tools.

• The EOF 100 Electric Paint Scraper Is Up to 5x Faster Than Traditional Power Sanders with Less Vibration, Soft Start, and Ergonomic Handles for Increased Operator Comfort.
• This Light-weight , Heavy-Duty Professional Planer Removes Varnish, Paint, Graffiti, Latex, Resins, Coatings, Solids, Greasy Dirt, Sprays & More.
• Tool For Use On Wood, Concrete, Metal, Aircraft, Boats, Decks, Siding, Walls & more. Low Clearance - Mill Right To The Edge.
• Dust Extaction Port For Reducing Exposure to Unhealthy Odors and Hazardous Chemicals (When Used With Dust Extraction Vacuum).
• Milling Head Diameter 4", Depth Adjustment 0.1 mm to 1.0 mm, 7lbs, Replaceable Carbide Milling Discs For Use On Wood/Softer Materials (P/N 37124000) For Concrete/Harder Material (P/N 37125000).

Product description

Rust-Oleum Painter's Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish on interior and exterior items. Projects take less time with a quick drying formula and excellent hide. Paint resists chipping and fading on a variety of surfaces.

From the Manufacturer

Rust-Oleum Painter's Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish on interior and exterior items. Projects take less time with a quick drying formula and excellent hide. Paint resists chipping and fading on a variety of surfaces.

• Use for a variety of indoor and outdoor project surfaces including wood, metal, plaster, masonry or unglazed ceramic
• Water-based acrylic formula is low odor, resist chips and provides long-lasting protection
• Covers up to 120 sq ft and dries to touch in 30 minutes for quick project completion
• Gloss finish provides a fresh new look for surfaces, goes on smoothly and provides excellent hide
• Prior to application sand surfaces with 180/200 grit sandpaper, then wash with a degreaser, allow the surface to dry and apply paint

User questions & answers

Question:	Can i paint outdoor plastic items with this
Answer:	I would say really snug and to use something better than the zip ties that come with it. We didn’t have ours super snug and the spaces between the grommets starts gaping and then the wind ripped the zip ties off and it got ruined.
Question:	can this be sprayed
Answer:	Yes
Question:	Can i use this on osb
Answer:	Black as shown in pic FYI... was disappointed in the shading quality. Our kennel gets direct sun and this does not block out the hot sun
Question:	How many square ft will 1 quart cover? Im painting a treated 2x12x16'. Im needing to paint 2 thinking i need
Answer:	Sorry, no. This product is designed for the US market, uses 110v to 120v and 60Hz.
Question:	Will this work on a wood garage door to remove marine polyurethane
Answer:	Please contact Wahl at [email protected] and we can help you with different attachments. Please include your address and phone number in your email.
Question:	Is this stripper safe to use to remove paint from a fiberglass boat
Answer:	The use of Epsom salts and bath oils should be fine- just make sure you wash them out when you are done.
Question:	Is it supposed to dry? I’m used to paint strippers remaining wet and dry usually spells disaster
Answer:	It is 14" wide, 5" deep and 17" long
Question:	Can you stain the wood after using this
Answer:	The rollers can be removed with a screwdriver. It will expose the whole that the bubbles come through but they can be removed. If you have further questions., please contact Wahl at [email protected].

Product features

Brush, Roll, Spread or Spray On

• Apply liberally
• Thick formula stays wet longer to penetrate multiple layers
• Spray application works to reach crevices of detailed surfaces

Give it Time to Work

• Starts working in 30 minutes
• May take up to 4 hours to work when removing several layers
• Test scrape an area to see if all layers have been removed from surface
• If desired result isn't achieved, apply more and let it work longer

Scrape Away

PRO TIP: Mist the surface with water prior to actual removal. It makes lifting the layers easier.

• Flat surfaces - use a stiff putty knife to lift paint
• Detailed surfaces - use a stiff bristle brush to lift paint
• Remove any leftover residue using a nylon brush or stripping pad
• Clean-up is easy with water
• Let completely dry before painting

Rust-Oleum 1979502 Painters Touch Latex, Gloss Black

Rust-Oleum Painter’s Touch Ultra Cover Multi-Purpose Brush-On Paint provides a smooth, durable finish that lasts longer. Apply to wood, metal, plaster, masonry or unglazed ceramic. Durable formula resists chipping and fading.

• Indoor/Outdoor durability

FOR BEST RESULTS

Prime bare wood and metal before application.