13 best outdoor deck paints

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• "Goof Proof" application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

• 【Anti-Rust Treatment】Outdoor patio umbrella side table made of metal iron,overall process of high temperature baking paint that good surface coating protection against rust and aging.The umbrella stand is surrounded on iron panels thus forming a large space able to fill some sandbags to stabilize the outdoor umbrella
• 【Umbrella Hole】The 1.57” (4cm) diameter umbrellas hole is suitable for most patio umbrellas and patio umbrella base that you can pair this patio coffee table with any type of patio umbrella, it will keep your patio umbrella firmly attached to itself
• 【Patio Table Design】Outdoor square umbrella table :21.45”(L)*21.45”(W)*18.7”(H) can be used in your yard garden pool deck for enjoy bistro dining and coffee. In addition, this umbrella stand outdoor base can bear the maximum weight of 200KG, is enough for sandbags and hold larger size outdoor umbrellas in place
• 【Ground Protection】Each patio umbrella side table legs has a protective cover at the bottom to separate patio umbrella table from the floor.When you need to move the patio table there is no harsh sound , the ground is protected from damage,also can prevent slippery
• 【TOOCA Customer Service】We offer one-year warranty and after-sales service. Please feel free to contact us when you have any questions before and after purchase. We can help you solve any questions or concerns about TOOCA products.

User questions & answers

Question:	Is there a ledge that you place a sandbag in it so the sandbag can stay in place
Answer:	There is a bracket at the bottom to put sandbags.Or put the sandbag on top of the umbrella base, it will not affect the appearance.
Question:	What are the dimensions of the base
Answer:	It is a table. The size is written on the picture.
Question:	Is there anyway to connect/secure an umbrella to the table to prevent an updraft from sending your umbrella up up and away
Answer:	No
Question:	Can the top of the table be removed or raised to allow for storage
Answer:	Yes, if you don't add sandbags

Product features

TOOCA Outdoor Patio Side Table ---Make A Perfect Choice For Your Yard

Why TOOCA is the best option?

OUR ADVANTAGE

• EXCELLENT MANUFACTURING PROCESS

The whole table is made of iron and after high temperature baking paint to prevent rust

Thickened material combined with the welded structure makes the table very durable

• VERY SUITABLE DESIGN FOR USE

Regular square size, in line with the aesthetic collocation: 21.5 L x 21.5 W x 18.7 H inch

200KG overall load bearing, outdoor courtyard type umbrella can easily holding

A nice end table can fit perfectly in any scene&spacem,table legs have protective cover at the bottom to to move around easily

• WITH UMBRELLA HOLE

The 1.57” (4cm) diameter umbrellas hole is suitable for most patio umbrellas and patio umbrella base

Witness The Quality Time You Have With Your Family

Desktop of size 21.5 x 21.5 inch is convenient for putting things on

• If you and your friends want to talk about life over coffee, this t is a outdoor coffee table
• If you and your partner are out in the sun, sipping wine in the yard, this is a outdoor bistro table
• If you have a picnic in the yard with your friends,this is a outdoor picnic tables

TOOCA Outdoor Side Tables can meets all your needs!

Product description

Sure Step Anti-Slip floor paint provides a durable skid resistant finish for interior or exterior application. Imparts excellent color retention, abrasion resistance and resistance to ponding water. Sure Step is water reduced which allows for fast dry plus easy application and clean up. Available in 5 ready mixed colors and white. There is also a clear coat to be used as a stand-alone clear finish. Sure Step can be exposed to light foot traffic 24 hours after application of the final coat. Allow 4- 5 days for heavier or continuous foot traffic. Sure Step non slip concrete coating and anti slip floor paint is formulated to be a performance anti slip paint for areas that require extra skid resistance. High-traffic surfaces such as tennis courts, patios, walkways, steps, pool decks and areas.

• Durable, skid resistant finish anti slip paint for interior or exterior application, excellent color retention, abrasion resistance, and resistance to ponding water.
• High traffic slip resistant paint for concrete that’s ideal for stairs, walkways, patios, and more.
• Fast drying, durable, easy application that fills and seals cracks.
• 80 - 120 square foot coverage per gallon.
• On exterior applications, do not apply when rain is threatening. Not for immersion service.
• Before painting, review the INSL-X Sure Step label for proper preparation and application tips.

User questions & answers

Question:	How long will this last around a pool? with heavy sun exposure in florida? i know you can’t give me exact time it will last. an estimate it fine
Answer:	Yes it is
Question:	Can this be used on diving boards
Answer:	For your application, we would suggest a film building clear finish that in intended to "seal" the tile and grout.
Question:	Can this be used on asphalt
Answer:	In regard to your question, I am not certain, since I only used the product on fabric. Because it does work so well on fabric, and the product does mention it works on wood, I would certainly try this product on your outside wicker items.
Question:	How many coats are recommended for a previous stained deck
Answer:	Ask a professional, not sure

Product features

INSL-X DIY Tip

Be sure to allow new concrete to cure for at least 30 days before painting.

INSL-X DIY Tip

Replace any loose or rusting nails before painting.

INSL-X DIY Tip

Bare metal surfaces must be primed prior to painting.

Product description

KILZ Siding, Fence & Barn Paint is great for use on weathered exterior surfaces. Use on exterior vertical wood surfaces such as plywood, fences, shingles and laminates. Also great for masonry and stucco.

From the Manufacturer

KILZ Siding, Fence & Barn Paint is great for use on weathered exterior surfaces. Use on exterior vertical wood surfaces such as plywood, fences, shingles and laminates. Also great for masonry and stucco.

• A good exterior paint offers coverage and protection against the elements, while adding beauty to outdoor structures. This is an all purpose exterior paint resists cracking, peeling and blistering.
• This paint features a unique water/oil base formula for exceptional adhesion, versatility, and longevity in varied conditions.
• Use on vertical exterior wood surfaces as well as masonry, stucco, and sanded glossy surfaces. Remove mildew, peeling paint, mill glaze, loose wood fibers, dirt, and debris before painting.
• This paint dries to the touch in 2-3 hours. Allow 6 to 8 hours of drying prior to recoating.
• This is a 1-gallon can of KILZ Exterior Siding, Fence, and Barn Paint in white. Ideal for vertical exterior surfaces.
• Coverage varies by porosity from approximately 200 square feet per gallon on porous surfaces to u 500 square feet per gallon on smooth, nonporous surfaces.
• Keep a wet edge and always back-brush or back-roll during all application methods. Paint can be sprayed, brushed, or roll on.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Can this be used on unpainted drywall inside a garage
Answer:	Yes
Question:	Would this be good on my front porch
Answer:	Are you painting the floor on your porch or the posts and rails? Highly recommend it for porch rails and posts but not sure how durable it would be on flooring.
Question:	Does this paint require a primer? Thx
Answer:	I used this on clean pressure treated and non-treated wood getting amazing one coat coverage without a primer. . The best one coat paint I ever used.
Question:	Is this waterproof and good to paint a yard fence
Answer:	Yes. It covers awesome! Perfect for fences and barns. Painted my well house with this paint. Came out awesome.

Product features

KILZ Siding, Fence and Barn Paint

Available in white and red.

Easy to Apply

Apply with a nylon/polyester brush, 3/8 inch-3/4 inch nap or airless sprayer. Dries to the touch in 2-3 hours, recoat in 6-8.

Paint the Town Red

Inspired by traditional and timeless rural barns, KILZ Siding, Fence and Barn in Red is a perfect choice for any exterior wood paint project.

White Picket Fence

Brighten up your fence, siding or barn with KILZ Siding, Fence and Barn in White. Can also be used on a front door or exterior trim.

Livestock Safe

Once dry, film will not harm livestock. Safe to use around animals of all stripes (and spots).

Product description

A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details). Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences. This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat. This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood. For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood. For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good exterior wood stain offers long-lasting protection, waterproofing and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions
• Our 100% Acrylic formula protects wood from rain, snow and sun damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding (see label for details).
• Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding, shakes and fences.
• This semi-transparent stain provides a mildew-resistant finish and UV protection. Coverage of up to 250 square feet For the first coat and up to 500 square feet For the second coat.
• This is a 1-Gallon can of KILZ exterior waterproofing, semi-transparent wood stain in Redwood.
• For failing coatings or to remove loose wood fibers, use a product such as KILZ Wood Stain & Finish Stripper followed by a product such as KILZ Wood Cleaner & Brightener to neutralize the wood.
• For best results allow the area to dry at least 24 hours before coating. Lightly sand to remove remaining wood fibers/fuzz. Apply with a pad applicator, nylon/polyester brush, or high quality pump sprayer.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	What type of solvent would I need to clean an automated sprayer out after using this product (warm water/thinner/solvent/etc
Answer:	It has a 1080 camera on it. No reason to attach a go pro.
Question:	Do they sell 5gal buckets
Answer:	The video quality is good
Question:	Could this be used to stain plywood subflooring indoors
Answer:	7-8 minutes after full charged per battery.
Question:	Can I use this over pre dyed wood (alcohol stain
Answer:	Just bought this drone. Absolutely NOT 8 min fly time. After calibration, gps sync, and using the camera to take pics, let alone video.. best fly time was 3.5 minutes.. was same on both batteries. Maybe if you take off and just let it hover with no maneuvers it may be longer. Going to buy another set and see if these were just old batteries. Good luck

Product features

Durable, Beautiful & Long Lasting

KILZ Stain provides durable, waterproof protection and a mildew-resistant finish that maintains the integrity and beauty of wood in variable outdoor conditions.

One gallon covers up to 250 sq. ft. for the first coat and up to 500 sq. ft. for the second coat.

Ideal for Decks, Siding, Fencing & More

Use on properly prepared new to moderately weathered and unsealed exterior wood surfaces (0-10 years exposure) including decks, shingles, wood patio furniture, railings, siding and fences.

Brush or spray on. Can also be applied with a high-quality paint pad.

Protects from Rain, Snow & Sun Damage

Our Acrylic formula protects wood from weather and UV damage. This stain is warrantied up to 3 years on decks and up to 5 years on fences and siding.

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Slate Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Can this work on a ceramic tile on the floor
Answer:	Hello, In short, yes. The floor will need to be cleaned and etched for this to stick properly to ceramic tile. Apply in thin coats.
Question:	would this be slippery on a concrete steps
Answer:	I have this paint on my patio, which is concrete. I have not had any problems with slippage even when its wet. Hope this helps.
Question:	Does this paint come in different colors
Answer:	Hi there, This product is available in Silver Gray (light gray) and Slate Gray (medium gray).
Question:	What is the Temperature range for application
Answer:	Hello, For best results, apply at temperatures between 50°F - 90°F. Temperatures above 90°F may affect the application such as drying too fast. Avoid painting in direct sun. NOTE: If the surface is hot to the touch it should be considered too hot to apply this coating.

Product features

KILZ Porch & Patio Floor Paint

KILZ Porch and Patio Floor Paint is a 100% acrylic latex product providing a durable, long-lasting finish that is ideal for both interior and exterior applications. This product will create a mildew resistant finish that resists scuffing, fading, cracking and peeling. Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises.

• 3 piece Big Fence and Stain 1.2 INCH THICKNESS OF PAINT BRUSH 4inch 5inch 6inch by thick 1.2 inch Wall brush with 100% polyester can hold more paints than thin paint brush so it is speed wall brush
• Fence brush 4 5 6 Inch with SCREW with extension pole Premium ferrule in blue copper finish for wall brush fence and stain for all paints
• Great quality of blended filaments with no falling off more paint hold 40% than general paint brush
• Ideal for Marine brush for painting Includes lip to hook the brush onto the edge of paint Can make your painting job easy
• KINGORIGIN since 1878 ,we are focus on and produced premium paint tools from 100 years ,this Fence brush Great job for large area painting works , it will improve and speed for fence and stain working

User questions & answers

Question:	What is the length of the bristles
Answer:	They are around 5 inches long.
Question:	Would these brushes work well for staining deck spindels
Answer:	I don't think so, they are more suited for wide flat surfaces. I used them to stain 8 × 8 cedar posts and they worked great.
Question:	How do you clean and store brushes after use
Answer:	You can wash with water and paint cleaner, which is available at your local paint store, and when the product is cleaned and dried, it can be stored in a cardboard box cover
Question:	do you just sell the 4 inch brush by themselves i would like to purchase several
Answer:	Decking brush included 4” 5” 6” 7” 8” 9”, another paint brush included 1” 1.5” 2” 2.5”3”4” flat 1.5” angle sash 2” angle sash , all size which we supplied

Product features

KINGORIGIN 3 PACK SUPER VALUE 4，5，6 inch

THIS IS GREAT VALUE PAINT BRUSH thickness of 4inch 5 inch 6 inch is 1.2 inch

4 inch 5 inch 6 inch with perfect box keeper to protect bristles, Superior build - long lasting custom Germany design built to last - Premium protective box packaging (makes a great christmas, painters day,Birthday, mother Day gift for the professional painters or DIY) Real deck staining brush that also gets into the cracks, heavy duty design holds up well. I spray the deck stain on and then use the 4 inch 5 inch 6 inch brush to decking brush with extension pole into crevices, cracks and even out the wet areas.

BEST MARINE BRUSH

BEST FOR MARINE PAINTING WORKS

KINGORIGIN SINCE 1878

SUPER QUALITY BEST VALUE

powerful of screw handle super grip with metal ring

painters selected bristles hold enough paints make paint easy

easy to clean

easy to use

easy to work with extension pole to reach

Best for Clean kitchen,bathroom,office

better than normal paint brushes

ideal deck stain brushes for all painters job

HIGH QUALITY KINGORIGIN

BEST QUALITY BEST VALUE BY KINGORIGIN

ideal for paint works on the walls

very faster than other deck stain brushes and applicator tools on the paint sundries market - Load up, back brush and coat between cracks in the one action! - TOO FAST application of paints, stains, sealers to rough or smooth surfaces.

BIG BRUSH SPEED BRUSH KINGORIG

ALL BLOCE BRUSH YOU CAN KEEP AS YOU LIKE

stronger handle with screw perfect work with all extension pole

3 best polular size 4 inch 5 inch 6 inch selected for painters

KIGNORIGIN SINCE 1878

PAINT BRUSH FOR WALLS WITH SPEED AND PERFECT

hold too much paints

speed brush

professional painters selected brushes

ceiling brush

• 🔰 𝟑 𝐏𝐨𝐰𝐞𝐫𝐟𝐮𝐥𝐥 𝐌𝐨𝐝𝐞𝐬 - Scuddles Electric paint sprayer features 3 Unique spray patterns which include vertical circular and horizontal; Scuddles paint gun is great for tables, chairs, fences, car, interior walls or crafts.
• 🔰 𝐒𝐚𝐯𝐞 𝐓𝐢𝐦𝐞 - its time saver because when using a brush it takes longer to get the paint in in harder to reach places; The recommended spray distance to surface is 10 TO 14 INCHES of the surface you are painting; Scuddles paint machine features various nozzle sizes (1.8mm/2.2 mm/2.6mm). The 1.8mm and 2.2mm nozzle are great for thinner paints like sealers and varnishes. 2.6mm nozzle is great for spraying latex paint, chalk type paint or any thicker type of paint.
• 🔰 𝐍𝐨 𝐓𝐨𝐨𝐥𝐬 𝐍𝐞𝐞𝐝𝐞𝐝– The paint sprayer is a no tools needed to assemble, just use it straight out of the box! it also Features a long power cord which will allow you to use in a larger workspace. scuddles paint sprayer is designed to be lightweight and to fit in your hand allowing you to do your spray-painting for longer periods without causing fatigue.
• 🔰 𝐄𝐱𝐭𝐫𝐚 𝐑𝐞𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃 - Scuddles paint gun comes with many packaged cleaning attachments, such as 2 extra straws, 5 nozzle caps which are made to help you adjust your paint flow according to the thickness of the paint.
• 🔰 𝐖𝐡𝐚𝐭𝐬 𝐈𝐧 𝐓𝐡𝐞 𝐁𝐨𝐱 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐝 – 1X Scuddles Spray Gun; 1X 1000 ml paint Container; 1X Funnel; 2X Straws; 1X Cleaning Needle; 5X Spray Nozzles; 1X User Manual; We also offer extra replacement containers and straws, so that you can keep different colors of paint within different canisters.

User questions & answers

Question:	Can it be used with polyurethane and or lacquer
Answer:	I used it for stain for 180 foot fence and it was awesome. Have a roller ready to catch drips.
Question:	What is the maximum viscosity that it can get
Answer:	I used Latex paint with a small amount of water to thin it. No problems whatsoever!
Question:	Can this be used to paint stucco walls
Answer:	Hi, Please try it first to a small portion before spraying it on everything on the stucco walls. Thank you.
Question:	can I use with latex paint
Answer:	yes but there is a good trick not to get the canester dirty by placing the paint in a bag inside the canister

Product features

Built for Power

5 Nozzles

Scuddles Paint Sprayer comes with three 2.6 mm nozzles which are great for thick paints, such as latex, chalk type paints. The 1.8 mm & 2.2 mm nozzles are made for thin paints, such as for thin paints, sealers, and varnish.

3 Straws, Cleaning Brush and Pin

The cleaning brush and unclogging pin make it easy for you to clean out the straws and machine. There are 3 straws included, to help reduce the amount of cleaning work.

Large Paint Container and Funnel

The 34 oz. (1000 ml) container holds a large amount of product. Replacement bottles and straws are available for purchase to make switching between paints quick and easy.

OUTDOORS

Great for outdoor projects, such as fencing, siding, and decks.

INDOORS

Use to prime and paint walls, doors, molding, and more!

HOBBY

Great for crafts, wood, and furniture. Get creative!

Product description

Liquid Rubber Foundation Sealant is an environmentally friendly coating that is easily brushed on and cures into a waterproof membrane. It can be used in many applications where you need to create a watertight seal. Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Use Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile to bridge seams, joints, vents, protrusions to create a long lasting repair or rejuvenation.

Apply when temperature is above 40F/5C. Apply to a dry surface, free of dirt, loose flaky paint and coatings, oil, grease, silicone, coal tar or other contaminants. Typically cures within 24-48 hrs.

Do not freeze. Store in a warm area. Do not apply in wet conditions or if rain is forcasted within 24 hrs.



Not meant as a constant walking surface or for long term exposure to UV.

Coverage - Flat/Ponding Surface - 15 sq ft/G per coat. Apply 4-5 heavy coats to achieve a 60-80 mil. (1.5-2.0mm) membrane.

Vertical Surfaces: Exterior - 20 sq ft/G per coat. Apply 3-4 heavy coats to achieve a 40-60 mil. (1.0-1.5mm) membrane. Interior - 50 sq ft/G per coat. Apply 2-3 heavy coats to achieve a 20-30 mil. (0.5-0.76mm) membrane.



Apply next coat when dry to touch and nothing is wet underneath; tacky is okay.



Generally 12-24 hrs between heavy coats. Amounts vary depending on surface roughness.



Use all material up to achieve a long lasting membrane.

Avoid hot, direct, intense sunlight during application. Remove Painters Tape while still wet.



Clean Up - Use soap and water or mineral oil to clean skin.

100% MONEY BACK GUARANTEE - If you need to return anything, we'll refund your full order amount. We ask the material be unopened, in new condition and you ship the product back to us within 90 days. We offer 5 Star Customer Support, Videos and Application Guidance.

• PROTECTIVE FINISH FOR - Foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more
• HIGHLY FLEXIBLE - Sealant final membrane has over 900% elongation in the sealing material preventing adhesion failure causing cracks and taring. Flat/Ponding Surface: 50 sq ft/G per coat
• EASY TO APPLY - No mixing required! Apply by brush, roller or high quality piston paint sprayer. Container can be closed and left over material used later. No pot life or working time like 2 component products
• ENVIRONMENTALLY FRIENDLY - Liquid Rubber Foundation Sealant is water based, containing no solvents, VOC's or harmful odors. Safe for humans and pets alike, can be used indoors and outdoors with no special breathing apparatus
• FOR A BULLETPROOF SYSTEM - Bridge joints, seams, vents, gaps, protrusions…. With Liquid Rubber Seam Tape or Liquid Rubber Geo-Textile where possible movement may occur

User questions & answers

Question:	can i use in wood? i want to do wooden pots
Answer:	N66C is recommended to set coils of 15-degree wire-weld or plastic inserted nails into a range of material, including wood shingles, insulation and fiber-cement boards, soft woods, drywall and sheathing and even steel siding. Uses fasteners from 1-1/4 to 2-1/2 inches long.
Question:	What's the lowest temperature to apply this product
Answer:	yes sometimes I have to angle the nail a bit so it doesn't go to deep in the fiber cement board
Question:	Approximately how many square feet will one 5 gallon bucket cover
Answer:	No not for hardie trim. This coil nailer is for the hardie siding not the trim. The trim needs to be attached with a finish nailer use 3" or 2 1/2" stainless steel or galvanized finish nails. Must use those types only with all hardie products. Others will corrode You need a finish nailer
Question:	will this work on a pond
Answer:	BTF83PT is a low profile nailer and weighs 10 lbs

Product features

Liquid Rubber Foundation Sealant

The perfect product for a leaking basement wall or building foundation, Liquid Rubber Foundation Sealant works by creating a watertight seal to keep moisture where you want it. With multiple uses, the possibilities are endless.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Foundation Sealant. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Highly Flexible

Liquid Rubber Foundation Sealant is highly flexible once cured. With over 900% elongation, you don't have to worry about minor movement destroying all your hard work. Still worrying about movement? Bulletproof your work with the help of Liquid Rubber Seam Tape or Geo-Textile.

Not meant as a constant walking surface or long term exposure to UV.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. You can close the container and use later if you have left over material. No pot life or working time like 2 component products. Apply by Brush, Roller or High Quality Piston Paint Sprayer.

Endless Possibilities

This nature-friendly product allows for an endless possibilities of usage. When you need a watertight seal, think Liquid Rubber. Use for foundations, ICF's, Basements, Shower Liners, Deck and Fence Posts, Planter Boxes, Metal, Wood, Concrete and more. Empower the DIYer in you with Liquid Rubber.

Product description

This 100% Acrylic Enamel is designed to produce a rugged, durable floor paint finish in light commercial or residential floor applications. Tough Shield Floor and Patio coating has good abrasion resistance and possesses excellent wearing qualities. It will withstand detergents, oils, grease and scrubbing. The cured film has excellent resistance to ponding water. Tough Shield concrete patio paint dries to a pleasant satin finish.

• Waterborne, acrylic enamel designed for a rugged, durable finish with good abrasion resistance withstanding detergents, oils, greases, and scrubbing.
• Resists ponding water and has excellent wearing qualities for interior floor paint or exterior floor paint used on surfaces like masonry, concrete and wood .
• Durable satin finish designed to produce a rugged, durable finish that stands up to weather and abrasion.
• Interior/exterior floor coating, porch and patio floor paint for light commercial as well as residential floor applications DO NOT USE ON GARAGE FLOORS OR CAR PARKING SURFACES.
• 350 - 450 square foot coverage per gallon.
• Apply when surface & air temperatures are above 50 °F (10 °C).
• Before painting, review the INSL-X Tough Shield label for proper preparation and application tips.

User questions & answers

Question:	Can this be used in a paint sprayer
Answer:	Hi, thanks for your question. We test our coatings for usage with airless sprayers. Our recommended settings would be a pressure setting of 1500 – 2500 PSI utilizing a tip size of 0.013 – 0.015. Ranges are provided for spraying as equipment can vary and factors such as age may come into play.
Question:	Can this be used to paint shutters and doors
Answer:	Yes, we used it for an outside porch area as well as some shutters & an outside door. It worked well!
Question:	How long before I can put furniture back on patio
Answer:	Great question. Allow 24 hours cure time prior to light foot traffic and 5-7 days prior to heavy use. Apply when surface temperature is above 50 °F. Please reach out to inslx .reviews @ gmail. com should you have any other questions.
Question:	Can we use this in pool deck? Currently our pool deck is concrete stamping and already faded, we thinking of using your product
Answer:	Hello, this paint is a good choice to use on your pool deck. The surface should be clean, dry and dull.
Question:	Can this be used on a shower floor
Answer:	I would not recommend this for shower floors.
Question:	Can it applied over painted cool deck and patch repairs
Answer:	As long as the Cool Deck has been previously painted with a water-based paint, yes you can. It can also be painted over patches if that's what your asking.
Question:	Can this be used on block wall
Answer:	I don’t see why not. It’s just a little bit thicker then paint.
Question:	How can I get this tinted
Answer:	To tint this you add 1gallon of paint in the color you want. We have several Amazon listings with paint that will work well in it. Message me and I will direct you to them. You can purchase both at once and I will mix here at the shop.
Question:	Is this acrylic based pait
Answer:	Yes, easy clean up latex
Question:	Does it say if you can use this on metal pools
Answer:	To the best of my knowledge, No it does not. It is very good paint that needs to be thinned but is meant for concrete pools.
Question:	Can this be used on fiberglass pools
Answer:	Yes
Question:	do you have to use primer first
Answer:	I haven’t used primer, also make sure to apply paint during the right temp, to hot and paint will bubble. Also make sure to let it cure
Question:	I have some cracks inside the expansion joints, will this work
Answer:	Deck-O-Seal flows a great deal when wet before it sets up. It has to be constrained or it will flow away. You will have to pour fine sand in the crack to create a floor for the product to sit in if you prepare the joint properly you will love this product.
Question:	From the 1st step to the last is it hard to keep debris out of the pool? Thanks
Answer:	It's unclear to me whether or not we're talking about a vinyl pool and a stone edging around it or is it a plaster pool as far as debris is concerned you need to look at the trees the wind direction and the time of the year generally if you're living in the east August would be the best time to do this
Question:	How long does it take to dry? I have a pool party in a week
Answer:	Overnight, if you mix it right.
Question:	How do I remove leaves and debris after it has dried
Answer:	after it dries it is hard to remove small debris but if you can rub a sponge back and forth over the leaf you might be able to sand it down.

Product features

In The Swim Aqua Coat Water-Base Swimming Pool Paint

In The Swim Aqua Coat Water-Base Swimming Pool Paint is a water-based acrylic pool paint. Aqua Coat can be applied to damp surfaces. This water-based acrylic pool paint can be applied to previous acrylic coating or over rubber base paint. Versatile water-based acrylic pool paint yields a short down time of only 3 days in most cases. Requires a minimum of 2 coats on initial application. Coverage: Approximately 250 - 300 sq ft per gallon. Should be applied with a 9” roller equipped with a ⅜” nap. Apply second coat at least 4 hours after the first coat. Pot Life: Indefinite as long as it is properly sealed. Allow to cure for 2 days before filling.

Determine Area Size

Determining the square foot of the area you are going to paint is important. This will help you figure out how many gallons of paint are needed to complete the job. It’s important to take the surface porosity and smoothness into account. When looking at how much paint you should purchase. Start by measuring the length and width of the area. Once you have those measurements plug them into the formulas below. Divide that number by the coverage square foot of the paint you are wanting to use. That will give you the number of gallons that you should purchase. Remember to look and see if the paint requires single or multiple coats and if it needs a primer.

Drain Water

Now that you have selected the paint type and know the square footage of the interior, it’s time to drain the pool. Rent or purchase a submersible pump. As soon as the outside ambient air temperature drops below 85° F. Check the local code for where pool water can be drained and start pumping. If the outside ambient air temperature is above 85° F stop draining the pool. At these elevated temperatures, the interior surface can crack and lose its structural integrity. While the pool is draining, remember that you can start to prepare the pool for paint.

Prepare for Paint

Now that the pool has been drained, you can start to prep the interior for paint. Start by removing the perimeter return jets, pool/spa light, main drain covers, aerator fittings and any other item you don’t want painted. Using painters tape, carefully tape off all the tile line, step/bench tiles, return lines, and skimmer mouth. Once you have everything taped off it’s time to prime.

Primer Coat

Now that the pool has been drained and taped, it’s time to prime. Remember not all types of paint use a primer. So if you have paint that doesn’t use a primer, skip to the painting step. Roll the primer onto the interior surface of the pool using a 9” roller with a ½” nap, starting with the walls and ending with the floor. Once you’ve completed priming allow the prime to cure for 24 - 48 hours. Then it’s time to paint.

Painting Interior

The pool has now been drained, taped, and primed. It’s time for paint. The type of paint you choose will determine the number of coats. Start painting the walls first and finish with the floor. If the paint you are using requires a time period in between coats, make sure you take that time. It will allow the paint to cure and harden increasing its chemical resistance and life span. It is suggested for steps, shallow areas and wading pools, sprinkle sand on the coating before it dries to make the area slip-resistant.

Fill and Balance

Now that the pool is painted and the paint has cured, it’s time to fill the pool and balance the water. Depending on your area you may need to order a water truck to deliver. If you have a garden hose available, toss it in. The average pool should take anywhere from 36 - 48 hours to fill. Once the pool is full allow the fresh water to circulate for 3 - 4 hours. After the circulation period it’s time to complete the first water test of many on the new water. Make sure to test the water weekly to maintain proper water balance and overall pool health.

INSL-X DIY Tip

Be sure to allow new concrete to cure for at least 30 days before painting the concrete patio or floor.

INSL-X DIY Tip

Remove any grass or weeds between bricks before cleaning.

INSL-X DIY Tip

Replace any loose or rusting nails before painting.

Product description

Slick or slippery surfaces can easily become hazardous — especially if they are in high-traffic areas. To avoid falls, trips, and slips, apply Skid Grip textured paint. It is safe for bare feet and shoes but can help provide extra traction to slippery areas. This 100% acrylic coating is extremely durable, making it great for interior or exterior use. Apply this paint to pool decks, courts, playgrounds, porches, ramps, boat decks, stairs, garage floors, driveways, and more to promote safety for people and pets of all ages. The highly adhesive paint can stick to almost any surface, including wood, concrete, stone, metal, fiberglass, and more. Plus, it is industrial strength and can withstand all types of weather along with everyday wear and tear. We also offer several color options so you can create a no-slip surface that blends in with or stands out from existing decor. Choose from Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate. These colors are designed to last for years to come, thanks to Skid Grip's long-lasting and abrasion-resistant finish. Skid Grip exceeds ADA standards for anti-slip surfaces, so you can feel confident in your purchase. Our anti-abrasion coating is easy to apply. To use, first thoroughly clean the surface to remove dust, debris, or other particles. Then, apply Skid Grip using a brush or roller. Allow ample time to dry before touching or applying another coat. We recommend 1–2 coats for optimal coverage. Order this 1-gallon can of Skid Grip today!

• ANTI-SLIP PAINT: Skid Grip is an acrylic textured paint that can turn any surface into a skid-resistant one. The durable coating is ideal for indoor or outdoor use to create a high-grip finish.
• INCREASE SAFETY: This slip-resistant coating is ideal for making high-traffic areas safer. Add it to a patio, pool deck, basketball court, driveway, step, ramp, or playground to prevent falls.
• ADHERES TO MOST SURFACES: Whether for home or commercial use, liquid Skid Grip can be used on almost any surface. It adheres to cement, wood, stone, asphalt, and more.
• EASY APPLICATION: To create a non-skid surface, first clean the surface thoroughly to remove any debris. Then use a brush or roller to apply Skid Grip and create texture. Allow ample time to dry.
• MULTIPLE COLORS AVAILABLE: Don't let a textured surface become an eyesore. We offer Skid Grip in fade-resistant colors, including Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate.

User questions & answers

Question:	Never got it
Answer:	Great stuff
Question:	Do the decorative epoxy flakes work well with this item
Answer:	The guy complaining its loaded with grit . How did you think it was made to be slip resistant ? There are alot of foljs that must growed up near power lines .
Question:	what color is closed to brown
Answer:	Hi Thanks for your question. Camel is a light medium brown. Thanks
Question:	Can this be used indoors for concrete floors
Answer:	Yes, but unless you don't plan on sweeping or mopping the floor I wouldn't use it on its own. It feels like rough concrete when applied. As a base coat that is covered in regular paint for concrete it works great. Once covered you end up with a textured, skid resistant floor that is sweep-able and mop-able.

Product features

100% Acrylic Anti-Slip Coating

Skid Grip provides a slip resistant surface that is specifically designed to beautify existing concrete, asphalt, and other surfaces. The 100% acrylic formulation provides increased performance and reduces oxidation. This prevents peeling, flaking and the erosion of the concrete surface below, keeping the integrity of the anti-slip surface intact for years to come.

Cost Effective

Skid Grip Anti-Slip Paint is a cost effective way to enhance the landscape of any project. This durable, 100% acrylic anti-slip finish has superior adhesion to prevent flaking and peeling on both concrete and asphalt. Create beautiful walkways, patios, pool decks, sport courts, ramps and driveways that are attractive, practical and economical.

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parks and Playgrounds
• Tennis Courts

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Pool Areas
• Patios

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Walkways
• Sidewalks

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parking Lots
• Driveways
• Cement Stairs

Seven Amazing Colors to Choose From

• Opaque Finish Completely Hides Wood Grain & Provides Maximum Protection Against Fading & Graying Caused by Damaging UV Rays
• Acts as Both a Stain and Sealer for Your Wood - Use Over Top of Existing, Solid Color Wood Stains (that still have good adhesion)
• Available in 6 Beautiful, Solid Color Finishes That Dry to a Flat, Natural Looking Finish
• Low Odor Stain, Water-Based Cleanup - Low VOCs (<60 g/L)
• For Use on all Horizontal and Vertical Wood Surfaces Including Pressure Treated Lumber, Pine, Cedar, Fir, Redwood, Mahogany, & More

User questions & answers

Question:	How much does 1 gallon cover
Answer:	About 1/4 of an 8x12 shed. I used 4 gallons for the whole shed
Question:	Will this work with a paint gun
Answer:	Yes, this product works well with an airless sprayer
Question:	Is there any texture to this solid stain? Does it last without peeling for a couple years
Answer:	There is no texture, just a smooth paint that took the texture of what we painted it on. No idea on the peel, only just used in the last couple weeks.
Question:	How much do I need for a 24’ x 18’ deck
Answer:	This is a water based product and as such gets a better coverage area. The product should yield approximately 600 SF. However, when staining a deck, you'll not meet that coverage area if you use an airless paint sprayer. Typically the average would be 450 - 475 SF. If you roll it, you should expect to get between 500 - 525 SF.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the #1 Deck brand, SaverSystems also manufactures DEFY, ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Does anyone have any tips on how to mop and clean the surface after its dry? A regular mop isnt cutting it. I cant get dirt off of it
Answer:	Olympic Stain 52125-1 Premium Deck Cleaner, 1 Gallon
Question:	Will this adhear to my fiberglass boat floor.The finish is rough, with a non skid texture in the fiberglass
Answer:	Hi Jeremy, We would not recommend this product for fiberglass or a boat. Gel stains do much better on fiberglass and this product was not designed to be used as a marine coating.
Question:	Does it have a strong smell
Answer:	No more than the usual paint smell. Not objectionable to use. I painted a porch and deck so was outdoors. But, I would expect no problem to paint indoors. Just good practice to ventilate the area.
Question:	Can i paint my travertine stairs with this paint
Answer:	I would not. First of all, it is latex(water based) it will not hold up well on travertine. Secondly, WHY would you ever want to paint travertine? If the tile is porous, you will have to fill it with a cementitious fill and then paint it. If you DO paint it, I would prep it, fill it, prep again, and then use an EPOXY, one or two part, to completely cover and seal it. A good epoxy would be from Armorpoxy.com. Stay away from those big store brand garage floor epoxies.

Product features

Upgrade Your Patio

KILZ Porch & Patio Floor Paint provides a long-lasting, mildew-resistant finish that resists scuffing, fading, cracking and peeling. Apply to prepared, previously-painted or primed surfaces.

Protect Your Investment

Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises. For interior or exterior application on wood, masonry, non-ferrous metal and architectural plastics.

Perfect for Wood, Masonry or Metal

Not for use on areas subject to automotive traffic. Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.