10 best anvil wood floor paints

Product description

Over Armor offers an innovative, waterproofing solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin surface. This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete. Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks. Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish. This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon. Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application. Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• Over Armor offers an innovative solid color coating that brings old, weathered wood or concrete back to life with an advanced and durable 100% acrylic resin formula.
• This solid color, textured coating bridges cracks, hides imperfections, and gives a uniform look to old, weathered wood and concrete.
• Use on weathered or cracked horizontal or vertical wood and composite surfaces such as decks, porches and boat docks, or railings as well as concrete surfaces like pool decks, patios and sidewalks.
• Over Armor is designed to conceal splinters and cracks up to 1/4-inch and creates a textured slip-resistant finish.
• This is a 1-gallon can of KILZ Over Armor Textured Surface Coating in Redwood. Covers approximately 75 square feet per gallon.
• Not for drivable surfaces such as garage floors or driveways. All surfaces must be clean, sound, dry and free of any dirt, oil, and grease before application.
• Two coats are required for optimal durability. Brush, roll, or spray on. Wait 4-6 hours before recoating and 72 hours for full cure.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	How can i make the gray lighter
Answer:	You can't, without changing its function. Use the Kilz Deck Paint for a lighter gray. You might contact Kilz to see if you can mix the two. I thought about that, but Over Armor is like dry wall mud, while the Deck Paint is like paint.
Question:	Would this be good for a garage floor
Answer:	This is not designed for drivable surfaces.
Question:	Will this work on an outdoor deck that is exterior plywood
Answer:	I painted a porch this past summer with two gallons of the Redwood colored product. The porch was made of exterior plywood. I used up more of the product on filling in some of the knot holes but the traction afterwards was fantastic and the look very consistent. Two coats would have been best! I recommend fully for this application.
Question:	Would this work on a boat floor
Answer:	Hello, This isn't a marine-grade product and therefore has not been tested for this kind of application. We wouldn't recommend using it on a boat because we haven't tested it properly and can't guarantee it would hold up.

Product features

Transforms & Protects

Revives wood and composite decks, porches and boat docks as well as concrete pool decks, patios and sidewalks. Covers up to 75 sq. ft. in two coats. Two coats are required.

Easy to Apply & Clean Up

Spatter resistant application and easy soap and water clean up. Recoat after 4-6 hours. Allow 24-48 hours before foot traffic, 72 hours to full cure.

Resists Cracking & Peeling

Covers splinters and cracks up to 1/4". Provides a durable, mildew-resistant finish once cured. Not for drivable surfaces like driveways and garages.

Surface Prep is a Must

Coated wood and concrete must be cleaned and stripped. Clean uncoated wood and etch uncoated concrete before applying to promote adhesion.

Product description

A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter). 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good porch and patio floor paint is highly durable, easy to clean and resistant to scuffing, fading, cracking and peeling in variable conditions. This product also features a mildew-resistant film
• This acrylic paint offers a low-lustre enamel surface that is formulated to endure on deck, porch, and patio siding and floors through variable weather conditions
• Appropriate for all previously primed or painted surfaces including wood and masonry. It also can be used on trim, siding and trellises
• KILZ enamel floor paint delivers a low-lustre finish that applies smoothly and evenly surfaces in Silver Gray. Dries to touch in 1 hour. Recoat in 4-6 hours
• This is a 1-Gallon can of KILZ enamel porch and patio latex paint in Silver Gray with a low-lustre finish
• Apply this paint with a high quality 3/8 to 1/2-inch nap roller cover, a nylon/polyester brush or an airless sprayer (.015 to .019-inch spray tip, 60 mesh filter).
• 1 Gallon of KILZ Porch & Patio Floor Paint covers 200-300 square feet on rough surfaces and 300-400 square feet on smooth surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Does anyone have any tips on how to mop and clean the surface after its dry? A regular mop isnt cutting it. I cant get dirt off of it
Answer:	Olympic Stain 52125-1 Premium Deck Cleaner, 1 Gallon
Question:	Will this adhear to my fiberglass boat floor.The finish is rough, with a non skid texture in the fiberglass
Answer:	Hi Jeremy, We would not recommend this product for fiberglass or a boat. Gel stains do much better on fiberglass and this product was not designed to be used as a marine coating.
Question:	Does it have a strong smell
Answer:	No more than the usual paint smell. Not objectionable to use. I painted a porch and deck so was outdoors. But, I would expect no problem to paint indoors. Just good practice to ventilate the area.
Question:	Can i paint my travertine stairs with this paint
Answer:	I would not. First of all, it is latex(water based) it will not hold up well on travertine. Secondly, WHY would you ever want to paint travertine? If the tile is porous, you will have to fill it with a cementitious fill and then paint it. If you DO paint it, I would prep it, fill it, prep again, and then use an EPOXY, one or two part, to completely cover and seal it. A good epoxy would be from Armorpoxy.com. Stay away from those big store brand garage floor epoxies.

Product features

Upgrade Your Patio

KILZ Porch & Patio Floor Paint provides a long-lasting, mildew-resistant finish that resists scuffing, fading, cracking and peeling. Apply to prepared, previously-painted or primed surfaces.

Protect Your Investment

Ideal for porches, floors, decks, basements, patios, siding, trim, furniture and trellises. For interior or exterior application on wood, masonry, non-ferrous metal and architectural plastics.

Perfect for Wood, Masonry or Metal

Not for use on areas subject to automotive traffic. Sealed surfaces may become slippery when wet. Use caution when walking on surface when moisture is present.

Product description

A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity. This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline. Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches. KILZ concrete floor paint delivers a Satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces. This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Slate Gray with a Satin finish. Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete. 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces. KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

• A good concrete floor paint is highly durable, easy to clean and won't scuff, fade, crack or blister easily, even from hot tires and other heavy activity.
• This single component, water-based floor paint is formulated to last in hard to clean areas like basements and garages. It's resistant to staining and damage from chemicals, Oil and gasoline.
• Use this high-durability floor paint on coated or uncoated concrete, masonry, stone and brick. This paint is ideal on high-traffic surfaces such as garage floors, basements, driveways and porches.
• KILZ concrete floor paint delivers a Satin finish that applies smoothly and evenly to floors and horizontal surfaces. Dries to touch in 2 hours. Recoat in 4 hours. Not intended for vertical surfaces.
• This is a 1-Gallon can of KILZ 1-part epoxy Acrylic interior/exterior concrete and garage floor paint in Slate Gray with a Satin finish.
• Ideal for use on new and uncoated concrete or masonry surfaces or painted, stained or sealed concrete. Viscosity - 90 - 100 KU. Volume Solids - 31%. Weight Solids - 41%
• 1 Gallon of KILZ Concrete & Garage Floor Paint covers 400-500 square feet on smooth surfaces and 300-400 square feet on rough surfaces.
• KILZ has been making premium primers and paints for 40 years. KILZ was named Paint Brand of the Year in 2015 in the Harris Poll EquiTrend  Rankings.

User questions & answers

Question:	Greetings, can this product be used inside a residence, living room, kitchen, bathroom and bedroom? The floor is ceramic, you will not have any probl
Answer:	Hello! You can spray with and HVLP using a 2.0 tip. We do not recommend thinning the product. You will want to adjust your tip size as opposed to adjusting the coating.
Question:	Anyone apply this to an exterior concrete wall
Answer:	Hello Adam: Rust Bullet Formulas are designed to be applied to a bare, clean and etched substrate. If you have paint on the concrete it will need to be sanded off, then the floor must be cleaned, etched and dry prior to applying Rust Bullet DuraGrade. We strongly recommend that you visit www.rustbullet.com so you can view and print the Application Instructions, and cover the steps to the process. If you prefer, you can e-mail [email protected], and we can send them to you. Regards,
Question:	Would this work on a concrete table top from Pottery barn, It have a light grey stain on it
Answer:	Rust Bullet DuraGrade dries to the touch to add additional coats, usually within 4-6 hours. After 12 hours, you must scuff (break the glaze) on the surface for re-coat purposes for the purposes of optimum adhesion. Rust Bullet coatings are, on average (depending on the humidity and weather/temperature conditions in you area) fully cured within 72 hours. ~Karen - Rust Bullet Cust. Serv. Rep.
Question:	Can I paint half the garage floor and do the other half a week later as long as I keep the paint in a sealed container between uses
Answer:	Trust me on this, this is quality/thick/durable product. The stuff from box stores isn’t even close. Plus the more humid during application, the faster it dries.

Product features

Give Your Garage a New Look

This high-performance, ready-to-use formula resists hot tire pick-up, scuffing, fading, cracking, peeling and blistering. Resistant to household chemicals like oil and gasoline.

Proper Surface Prep is Key

For proper penetration and adhesion of topcoat, use a concrete and masonry cleaner prior to applying this product. Apply in two thin coats, being careful not to over apply.

Great for Driveways, Decks & Basements Too

For use on horizontal surfaces including garage floors, driveways, basements, porches and pool decks. Not formulated for vertical application or industrial use.

Product description

Valspar Porch, floor and patio latex paint glides on and dries quickly to a hard, smooth finish.

From the Manufacturer

Valspar Interior/Exterior Latex Porch & Floor Enamel is a satin sheen coating that gives floors tough, long-lasting protection. The premium quality, 100% acrylic latex formula is ideal for indoor applications where low odor and fast dry are important. Can be lightly walked on as quickly as one hour, and takes regular foot traffic in 24 hours. This weather resistant formula can be used indoors or out and gives years of long lasting beauty and protection.

• Use on wood, concrete, floors, primed metal, steps, railings and porches
• For interior and exterior use
• Multi-purpose and weather resistant
• Water clean-up and wear resistant

User questions & answers

Question:	why is this Not for Exterior wood decks/porches
Answer:	Yes, it could. However, you'll want to sand the floor well and then coat it with with a west system epoxy to seal it properly. Then a light sanding followed by multiple coats of varnish. It is very thin and flows very well without streaks or brush marks.
Question:	Can this be used on ceramic tile
Answer:	slight but it will darken with age.
Question:	will this work on hardwood floors
Answer:	Depending on the wood..but generally I would say if it works on a boat..it should work on wood like a clear coat..
Question:	Want to cover wood subfloor in my basement utility room. would like to be water resistant. do you think this would work? and if so, do i need a primer
Answer:	No, this is a great product but remains a little flexible. You would want a 2 part Epoxy ( very easy to apply) or a poly based product. System Three has a great epoxy line or get a "bar top epoxy".

Product description

Prior to application sand surfaces with 180/200 grit sandpaper, then wash with a degreaser, allow the surface to dry and apply paint

• Covers up to 120 sq ft and dries to touch in 30 minutes for quick project completion
• Prior to application sand surfaces with 180/200 grit sandpaper, then wash with a degreaser, allow the surface to dry and apply paint
• Gloss finish provides a fresh new look for surfaces, goes on smoothly and provides excellent hide
• Use for a variety of indoor and outdoor project surfaces including wood, metal, plaster, masonry or unglazed ceramic
• Water-based acrylic formula is low odor, resist chips and provides long-lasting protection

• INNOVATIVE PROTECTIVE DECK COATINGS - Liquid Rubber Polyurethane Deck Coating is a high-performance polyurethane coating with a hard, durable & waterproof surface with excellent UV stability
• POLYURETHANE COATING FOR - Deck & dock protection, on concrete or wood walkways, non-corroded metal structures, pool decks, indoor/outdoor floors, fences, baseboards, plywood surfaces, and more
• EASY TO APPLY - Apply using a conventional brush, roller, or single component sprayer; no mixing required
• COVERAGE - Should be applied at a coverage of 100 square feet/gallon per coat. Min 2 - 3 heavy coats. For waterproofing areas we recommend 3-4 coats
• APPLICATION - Avoid hot, intense direct sunlight during application. Apply above 10 degrees Celsius (50 degrees Fahrenheit). Do not apply later in the day if dew is forecast

User questions & answers

Question:	How much will I need for a 240sf plywood deck? Im using the primer as well. Need a total as the instructions are kind of confusing for this
Answer:	The same as the ones that you took off. I think 3/4 fine thread. Not sure 🤔
Question:	Can this be used to paint over playground equipment metal, walkways, steps etc
Answer:	They fit my Club Cadet zero turn 54 inch
Question:	Is it slippery when wet
Answer:	Yes, they fit mine
Question:	Can this be used on composite wood
Answer:	No, just one. Not case pack.

Product features

Liquid Rubber Polyurethane Deck Coating

The perfect product to add a hard, durable, waterproof surface to any deck or patio. Liquid Rubber Polyurethane Deck Coating is a high-performance polyurethane elastomeric coating that cures into a waterproof membrane with excellent UV stability. Available in both smooth and textured finishes.

Make it a home project

Skip the hassle and cost of contractors and make it a DIY project. From big projects to small projects, accomplish it yourself with the easy application of Liquid Rubber Polyurethane Deck Coating. Simply apply by using a brush or roller. It's so easy, anyone can do it.

Excellent Solar Reflectivity & UV Stability

Liquid Rubber Polyurethane Deck & Dock Coating is a brush, roll and spray high-performance; polyurethane, elastomeric coating that provides a hard, durable; waterproof surface. The cured membrane has excellent solar reflectivity and UV stability. This means the membrane will last for years to come, allowing you to enjoy your handiwork for a longer period of time.

Easy to Apply

Basically just like painting except you use heavy coats to build up your waterproof membrane. Open the container and start using. Apply using a roller, brush or paint sprayer to provide a seamless and fully adhered membrane to most substrates.

Endless Possibilities

Liquid Rubber Polyurethane Deck & Dock Coating is a great way to add a protective layer to almost any DIY project you can think of. With a hard, durable, waterproof coating, your projects will last longer and look better for a longer period of time. The possibilities are endless.

Product description

Garage Floor Coating Kit.

• Breathable two-part waterborne epoxy coating, Decorative flakes, Anti-slip aggregate, Cleaner/Degreaser included
• Professional grade floor covering, Easy to install, No acid etching or mechanical prep necessary in most cases, Clean with degreaser included, mix and apply with roller, Scatter flakes in wet epoxy
• Epoxy coating breathes allowing moisture vapors to pass through eliminating blistering and peeling, Resistant to automotive fluids, hot tire lift, Good adhesion to concrete and wood

User questions & answers

Question:	how many square feet will this cover
Answer:	Whatever the box says just add more. I thought I would only need 3 packages but ended up needing four. When in doubt buy more and return the extra if you don't need it.
Question:	can this be applied to linoleum floors
Answer:	I would suggest calling the manufacturer, they were very responsive to me. I did my garage floor and it has held up well for 3 years now. But the coating adheres to the open pores in the concrete. I did a diamond grind on the concrete to prep it. It seems to me that linoleum would not be a good surface for it to adhere properly. It’s possible that scuffing the linoleum or prepping it in some way may work but I would seek the manufacturers recommendation. You can also google the product to get more information.
Question:	would this work on exterior aplications? like coating the congrete for my covered patio
Answer:	I would recommend you research this question at the manufacturer’s website www.milamar.com.
Question:	Tough enough for industrial use (fork trucks, heavy carts
Answer:	I am familiar with this brand / manufacturer. YES it is tough enough, however proper floor preparation is a MUST for ANY epoxy in an industrial environment. Grind the floor to bare concrete with diamond tooling. Meticulously clean it (clean enough to eat off of it). Lack of proper prep is the number ONE reason for any epoxy failures. Apply at about 10 mills thickness and allow to cure overnight. If doing second coat, it MUST be applied within 24 hours of the first coat and then allowed to cure for 24 hours before traffic. Aluminum oxide or quartz can be broadcast into it while wet to give a slip resistant finish. You will love how it performs

Product description

Varathane Premium Fast Dry Wood Stain is a high-performance stain enhanced with nano pigment particles. Nano pigments provide ultimate color quality and exceptional wood grain highlighting allowing for maximum color in one coat. Varathane Fast Dry Wood Stain seals wood pores and hardens in just one hour. Easily brushes on without the use of a pre-stain or wood conditioner.

• Ideal for use on all interior wood projects: furniture, cabinets, doors, trim and paneling
• One-coat coverage, fast-drying oil based formula
• Dries to the touch in just 1 hour and covers up to 70 square feet
• High performance stain system enhanced with nano pigment particles
• Highlights natural wood grain to reveal wood's beauty

User questions & answers

Question:	Can this stain be thinned out? If so, with what
Answer:	Not even close. Way too small!
Question:	Looking to paint hollow doors- Do I need a wood conditioner first? Or will this cover well in 1 coat
Answer:	Yes
Question:	Is this considered a gel stain or regular stain
Answer:	I don't know much about them. It is the one that fits my Graco spray gun
Question:	Should this be applied with a brush or cloth
Answer:	Just a standard 315FLP

Product features

Varathane Premium Fast Dry Wood Stain

Varathane Fast Dry Wood Stains are 3 times faster than ordinary stains.

Sand with Increasing Fine Grits

• Sand bare wood in the direction of the grain
• Start with #120 grit sandpaper and progress through #150, #180 and #220 grits
• Wipe clean with mineral spirits

Stain with Brush or Lint-Free Cloth

• Apply liberally with brush or clean, lint-free rag
• Wait 5-10 minutes according to color preference
• Wipe off with clean, lint-free cloth in the direction of wood grain

Cover with Poly for Extra Protection

• For long term protection and durability, top coat with Varathane Polyurethane
• Can be coated within 1 hour of stain application

Helpful Tips for a Perfect Project

Product description

Give your outdoor spaces a fast, beautiful, easy & affordable update with RTG Deck, Porch, & Patio Anti-Slip Paint. It renews and protects outdoor floors, decks, ramps, & stairs made of sealed concrete, masonry & wood. Just 1-3 coats turn worn and weathered into warm and welcoming (and wow!). The surface is not only beautiful, but slip resistant—even when wet. Better yet, its unique traction additive isn't abrasive like other anti-slip paints, which is good news for bare feet and tender paws.This durable water-based polyurethane coating stands up to hot sun, driving rain, slushy snow, heavy foot traffic, company, kids, & pets without peeling, flaking, or fading. With its solid coverage and scuff resistance, you can rearrange furniture to your heart's content. No more parking rugs and chairs in the same spots season after season to hide stains & other surface eyesores. Channel your inner exterior decorator, move things around, and live a little! The results will look so comfortable and cozy you'll be tempted to turn the welcome mat around.RTG Deck, Porch, & Patio Anti-Slip Paint is available in four inviting neutral shades of Sand, Light Gray, White, or a rich, Clear/Amber. Choose a single color that complements your home's exterior, or be creative and dress it up with multi-toned diamonds or other patterns. You're limited only by your imagination and the size of your deck, porch, or patio.This fast-drying, DIY-friendly paint is very easy to apply with a brush or roller and cleans up easily with soap & water. Eco-friendly, low-VOC formula has very little odor so it's ideal for use in living spaces outdoors or indoors. Compare to Behr Premium Porch & Patio Floor Paint and Kilz Porch & Patio Floor Paint. RTG Deck, Porch, & Patio Anti-Slip Paint has a softer non-slip texture and is a much better value. All RTG products provide excellent results, are very easy to use, & are 100% made in the USA.

• Fast-drying, textured paint provides an attractive finish & secure footing on exterior surfaces that become slippery when wet. Great for decks, porches, patios, stairs, ramps, and much more. Traction additive is not abrasive like other anti-slip coatings.
• Easy to apply by brush or roller (1/4"-3/8" foam or nap roller cover for surfaces with a smoother texture; ½"-3/4" foam or nap roller covers for masonry with deeper texture).
• Durable coating withstands heavy foot traffic and harsh weather. UV-stable formula resists fading.
• Eco-friendly, low-odor, low-VOC, water-based polyurethane formula can be applied to properly prepared sealed concrete, masonry, and wood. No priming necessary. Cleans up quickly with soap & water.
• Choose from 4 neutral colors: White, Light Gray, Sand & Clear/Amber. One quart covers 80-100 sq. ft.

User questions & answers

Question:	Has anyone applied it to fresh treated wood (AC
Answer:	I did without a problem, it will start to flake after about 6 months. You'd be better off with something else for long term, but the effect is pretty good and will not hurt you or irritate the skin. (in my experience anyways)
Question:	Does this work on PVC composite decking
Answer:	You put 10 dollar clear glue over a 300 dollar door knob?.... The fact that your handset can't survive without a cheap enamel is more worrisome. My 15 dollar Kwikset knob looks brand new after 7 years.
Question:	Does this product help keep the concrete cool during summer results
Answer:	In my case, so far so good with my shower caddy, which was treated with the Rust-Oleum product.
Question:	Would you recommend on concrete patio around a unground pool
Answer:	Yes. The star hole is a standard and these are for 42” mowers. I have a set on my Troy-Bilt.

Product description

Jolie Home offers premier decorative paints, topcoats, brushes, and embellishment products. Jolie Paint is a water-based, non-toxic, and quick-drying paint for furniture, cabinetry, floors, walls, and home accessories. It is available in 42 pre-tinted colors that can be mixed together to create custom colors that will match or complement any color you have in your space. Use with Jolie brushes to achieve beautiful painted finishes, such as smooth, modern, distressed, textured, and many more. Jolie Paint works for any style, from contemporary to vintage, traditional to bohemian, and coastal to farmhouse. It adheres to almost any surface, including wood, previously painted and finished surfaces, matte plastics, stone, brick, concrete, and metal. For interior projects, use Jolie Paint with complementary products such as Jolie Finishing Waxes or Jolie Floor Varnish, to seal and protect your finish and enhance durability. For exterior projects, you should not seal your painted finish. Jolie Paint is made in the USA. Visit our website to watch tutorial videos, read the Jolie Everyday Guide for step-by-step instructions, and find a local retailer. Jolie Paint in SWEDISH GREY is the perfect greige, a gray-beige inspired by Swedish Gustavian painted furniture. Often described as a light taupe, Swedish Grey is one of the colors in the Jolie Signature Neutrals Collection.

• Premier Chalk Finish Paint - Minimal to no prep with no sanding or priming and easy application on a variety of interior surfaces
• Water-based for easy clean-up with soap and water
• Non-toxic and low VOC paint that is safe to use indoors
• Superior coverage: one 32oz quart covers about 150 sq. ft; 4oz sample covers 20 sq. ft, most colors need only 1-2 coats
• Dries quickly in 30 minutes to a flat (matte) finish. Use with Jolie Finishing Wax and buff to a higher sheen

User questions & answers

Question:	Can I paint the concrete steps on my porch? It says not to seal so will the paint wash off
Answer:	Yes, I own the 390, that will fit the manifold

Product features

Step 1

GET INSPIRED

Take our Style Quiz on our website or browse inspiration by style, color, finish, project, or room to plan your next project.

Step 2

BE IN THE KNOW

Learn from our Everyday Guide, Embellishment Guide, video tutorials, FAQ page, and color collections.

Step 3

STOCK UP

Shop Jolie Paint, topcoats, embellishment products, and brushes online or at your local Jolie Retailer.

Step 4

GET PAINTING

Complete your project and show it off! Share your transformation with us by tagging @joliepaints and #joliebyme

Create beautiful colors and finishes on furniture, cabinets, floors, walls, and home accessories.

MIX COLORS

Jolie Paint is available in 42 beautiful pre-tinted colors. Use them on their own or combine multiple colors to create a custom hue. Use the Jolie Color Mixing Guide as a reference, or experiment and create your own! Creating custom colors allows you to make your project even more personalized.

CREATE A VARIETY OF FINISHES

Whether you use a single color or layer a few, Jolie Paint can be used to create hundreds of custom finishes. Read the Everyday Guide to learn how to create basic, smooth, textured, washed, dry brushed, and distressed finishes.

Jolie products are designed to be versatile.

PAINT ANY MATERIAL

Jolie Paint adheres to almost any surface, including wood (raw, painted, stained, waxed, or sealed), metal, matte plastics, brick, concrete, stone, and some fabrics. See the Jolie Everyday Guide for additional information on the treatment of different surfaces.

PAINT FLOORS

Jolie Paint can be used to paint large, hard-wearing surfaces such as Floors. Instead of Finishing Wax, seal your floors with Floor Varnish.

COMPLETE OUTDOOR PROJECTS

Jolie Paint can be used on furniture and accessories that will primarily be used outside. Do not use Metal Leaf, Finishing Wax, or Floor Varnish on your outdoor projects.

Embellish with colored Finishing Waxes, Gilding Waxes, and Metal Leaf.

ADD METALLICS

Use Jolie Metal Leaf before waxing to add a bright metallic shine to your project. To knock back the brightness, apply Brown Finishing Wax.

COLORED & GILDING WAXES

Colored Finishing Waxes and Gilding Waxes are the perfect way to add that final special touch to any project. Layer waxes to create additional character and depth in your finish.

Jolie Everyday Guide

The Jolie Everyday Guide is the essential beginner's guide to learn six of Jolie Home's signature finishes. It covers everything from materials, preparing your surfaces, step-by-step techniques, applying Finishing Wax and Floor Varnish, mixing colors, cleaning, and care.

INCLUDED FINISHES:

• The Basic Finish
• The Smooth Finish
• The Textured Finish
• The Distressed Finish
• The Dry Brush Finish
• The Washed Finish.

Jolie Embellishment Guide

Add depth with colored Jolie Finishing Waxes, add metallics with Jolie Gilding Wax or Jolie Gold Size and Metal Leaf, or mix your own colored Finishing Wax by adding a little Jolie Paint! Download the Embellishment Guide to learn everything you need.

INCLUDES HOW TO USE:

• Colored Finishing Wax
• Custom Colored Finishing Wax
• Metal Leaf and Gold Size
• Gilding Wax

Updating Cabinets with Jolie Paint (Tutorial)

Follow along with Jolie Home's Youtube channel to learn how to paint your cabinets with Jolie Paint. Jolie Paint is a great option for transforming outdated cabinetry, including kitchen and bathroom cabinets. View the Jolie Everyday Guide for written instructions on creating various finishes.

Dyeing Fabric With Jolie Paint (Tutorial)

Did you know you can dye fabric with Jolie Paint? It is a great way to update simple linens to coordinate with your style and space. Fabric dyeing works best with natural fibers, like cotton or linen. Follow along with the tutorial by visiting our Youtube channel.