12 best rated wood deck sealer

Product description

SEAL ENDS ONCE Premium End Sealer deeply penetrates the cut ends of lumber to protect against, splitting, water damage & decay. The ends of cut lumber are exposed to the elements causing them to dry out faster than the rest of the board. This can lead to end checking (drying splits), that can appear only months after a new deck installation. Water is also more easily absorbed through un-sealed ends or decks, which can lead to rot, decay, mold & mildew growth. SEAL ENDS ONCE has been the #1 cut end sealer since 2005 and is a great investment to protect & preserve wood decks & steps. SEAL ENDS ONCE protects the cut ends of lumber by sealing the cut ends to slow the drying process & prevent water absorption. It is non-film forming, non-yellowing and will not alter the natural beauty of the wood. It preserves the integrity of the wood by inhibiting rot, decay, mold and mildew growth, and eliminates warping and cupping. SEAL ENDS ONCE forms a flexible, breathable barrier that allows the wood to expand and contract and for water vapor to escape. The advanced nanotechnology of SEAL ONCE penetrates and bonds to form a superior barrier below the surface, protecting from the inside out. Recommended Applications: Cut ends of all soft and hardwoods including: Cedar, Ipe, Mahogany, Cumaru, Bamboo, Timbersil, Redwood, Tigerwood, Fir, Pressure treated lumber. Features: Eco-safe, Non-toxic; will not harm pets, plants, people or marine life, Ultra-low VOC, Water based formula, Flexible, breathable barrier, Stabilizes & protects wood, Prevents warping & cupping, Inhibits wood rot & decay, Can be applied to damp surfaces, Soap and water cleanup, Clear formula can be painted or stained after treatment.

• Penetrating end sealer that can be painted or stained after treatment (unlike most top-coat wax end sealers)
• Stabilizes & protects new wood decks, walkways & steps to prevent end checking (drying splits)
• Prevents water absorption that leads to warping & cupping Inhibits wood rot & decay Soap and water cleanup
• Eco-friendly Non-toxic; will not harm pets, plants, people or marine life Ultra-low VOC Water based
• Approximate coverage: 250-350 sq. ft./gallon per coat. Quart size will cover most decks/step ends

User questions & answers

Question:	Can this be used on new pressure treated lumber, or does the wood have to cure
Answer:	We need to know your project before we can recommend a product. You may check the ingredients by down loading our safety data sheets.
Question:	I bought another product and realized after I received it that the boards need to be freshly cut within 24 hrs. Is that required with this product
Answer:	Super easy to use, My new favorite tool in the collection. Just take your time and measure Properly before you start drilling.
Question:	What makes this different than the seal once nano sealer? isn’t it all made with silane/siloxane
Answer:	Inches. Worked well.

• Prevents up to 90% or more of end checking (drying splits)
• Green wood sealer for turning blanks, cookies, wood bowls and carvings
• Ipe decking end sealer - widely used to protect cut ends of wood decks & steps
• Water-based , eco-friendly log & lumber end grain sealer
• End grain sealer of choice among log and lumber industry professionals since 1980

User questions & answers

Question:	Can I use this to prevent wood slice ornaments from splitting
Answer:	I can’t imagine why you would use on pressure treated wood. Product is designed to control drying of green wood.
Question:	What's the difference between this and pentacryl
Answer:	Not sure how far a gallon would cover, but it does not soak in deeply.It acts more like a liquid waxy coating that dries just below the surface.
Question:	Is this usable on pressure treated wood
Answer:	Pressure treated wood must "weather" for several months before you apply Seal-Once products.
Question:	how far does 1 gallon cover? sq feet? does it soak in deeply on fresh cut wood
Answer:	It doesn't have to be within 24h.

Product features

Available in Quart, Gallon & 5 Gallon Sizes

ANCHORSEAL 2 combines our wax emulsion with natural, plant-based polymers to create a hybrid end sealer that protects freshly cut logs and lumber from damaging end checks and splits while air drying. ANCHORSEAL 2 can be used on hardwood and softwood logs and lumber to protect against costly degradation.

Prevents up to 90% of end checks and drying splits

• Hybrid formula combines wax with natural plant-based polymers

• Can be applied to all species of hardwood or softwood

• Helps prevent blue stain and sapstain caused by damaging fungi

• Water based, non-toxic formula

• Available in clear or more than 35 colors

Coverage: 100 sq. ft./gallon, depending on application method and wood species.

Application:

• Apply a heavy film of ANCHORSEAL 2 using a brush, roller or sprayer until it begins to drip slightly.

• For optimal coverage, use a gas engine, electric, air operated or backpack sprayer

• If using spray equipment other than those sold by U·C Coatings, use 0.21”/0.55 mm tip or larger.

Premium sealer for green wood, wood bowls, turning blanks, cookies & slabs

ANCHORSEAL and ANCHORSEAL 2 have been the leading end grain sealer for the log & lumber industry since 1980. Not only are they the best end grain sealers in the world, they come at a low cost, with easy application and clean up with soap & water.

• Water-based sealer with advanced penetrating nanotechnology & added strength of Polyurethane. This premium wood sealer performs like an Oil-based product, without any noxious solvents or toxic chemicals.
• Great investment to enhance and extend the natural life of wood. Protects against water damage for up to 10 years on vertical surfaces & 6 years on horizontal.
• Ultra Low-VOC wood sealer safe for people, pets, plants or marine life. Easy to apply with soap & water clean-up. Save time with wet on damp application.
• Prevents warping, cupping, wood rot, mold, mildew, staining, decay & will not peel like many topical sealers that only form a top-coat.
• When used as a wood stain creates a UV barrier to prevent fading. Rich color palette available in 11 different color tints. Clear formula allows wood to turn gray naturally

User questions & answers

Question:	What color is this sealer? On the can it says clear but in the description it says white
Answer:	It goes on white dries to perfect wet look clear
Question:	Can this be used on raised beds? Both inside and outside of the bed
Answer:	You may use this product, however, the inside of the box will not be protected as it would be against soil.
Question:	Can I use this on the inside of a terrarium? I'm making one out of wood, and I need the inside to be water proof, as it will be very humid
Answer:	We would not recommend our products for this application. It will be too much constant contact with moistures in an enclosed area.
Question:	Why shouldn't the product be used in doors? What would you recommend on doors
Answer:	Seal-Once products are completely penetrating and are non film forming. The door will still look like raw wood after it is applied. You cannot apply stain, paint ,polyurethane, or varnish over Seal-Once products. Also, Seal-Once products must be applied to raw wood.

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, NANO+POLY creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment and do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight.

Available in 11 Tinted Wood Stain Colors

NANO+POLY can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

From the Manufacturer

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.
• Easy maintenance - no sanding or stripping required for re-application

User questions & answers

Question:	What is the warranty on this
Answer:	I don't believe there is any warranty. We applied it two years ago and the covered areas still look good. The section in direct Sun...needs to have it applied again.
Question:	How long can the product be stored once the container is opened
Answer:	We actually used some that we had stored in our garage that was left over from the last time we stained our siding and that was in the summer of 2012, 6 yrs ago. When we removed the lid, it looked like it had become a gel but my husband used a drill with a paint mixer/stirrer tool and it became liquefied again. We applied it to the siding without incident and the color matched the new 5 gallon containers we bought this summer .
Question:	I have 275 ft of fence plus a gate- what's the coverage with using a sprayer
Answer:	I’m in the process of staining my fence (I am using a different brand) with a semi-transparent stain. I have 187’ of fence at 5’ high including 2 gates. Applied with a roller and brush, I’m going to need around 13 gallons. My recommendation is rent a sprayer from Home Depot. You’ll save time and money as you’ll use less product and it will go much much faster.
Question:	we have a heavy dining set and i am worried about scratches after i stain, how does it hold up to heavy chairs moving back and forth
Answer:	I have a deck/patio furniture set, including a cast iron umbrella base. Lots of use over the last year with no evidence of scratches in the deck. The stain penetrates the wood rather than building a barrier so dragging stuff across the boards won't take it off provided the wood is properly prepared.

Product features

Application

1. Use a brush, roller or sprayer to apply Ready Seal.

2. Blend multiple containers together to ensure color consistency.

3. Apply two light coats to wood surface and allow at least 45 minutes between.

4. Allow 48 to 72 hours of drying. Drying time will vary depending on temperature, humidity and surface porosity.

-Ready Seal contains no linseed oil and will not stain hands.

-Ready Seal is biodegradable when in contact with soil and water.

-Meets current VOC level requirements throughout the United States.

• WATER-BASED SEMI-TRANSPARENT WOOD STAIN – This environmentally friendly, water based deck stain allows the wood grain to show through with a beautiful semi-transparent, natural matte finish. It's great for staining wood decks, fences, siding, playsets, outdoor patio furniture, and more.
• FORTIFIED WITH ZINC NANO-PARTICLE TECHNOLOGY– It’s like sunscreen for your wood. Tiny zinc particles dispersed throughout the stain reflect damaging UV rays, preventing premature graying and color loss.
• EXTREMELY DURABLE, QUALITY THAT LASTS – DEFY Extreme wood stains are made with the highest quality resins available that have better resistance to fading and darkening. The result is a quality semi-transparent deck stain that typically lasts a season or two longer than competitive products. Keep your deck, fence or siding looking great for longer by using DEFY premium wood stains.
• EASY TO MAINTAIN – When it’s time to do a maintenance coat, there’s no need to sand or strip the surface again. Simply brighten the wood with DEFY Wood Brightener and apply a single maintenance coat of DEFY Extreme Wood Stain.
• 250 VOC COMPLIANT - Ships to all states except California. California residents can purchase DEFY Extreme 40, which is VOC Compliant in California.

User questions & answers

Question:	will this work in paint gun
Answer:	yes it will, that's how I applied it.
Question:	Will be applying to white cedar fence. How dry does the wood have to be
Answer:	I did not heed the "one year" to dry on the new portion of my deck. Did old and new at the same time when the new portion was perhaps 2 months old. There was a definite difference. I washed and brightened both. Also did two coats. The 2nd coat was done while the first coat was still wet as per instructions. Also brushed vs. rolled. The stain seeped into the older wood much better and the color is richer. Don't believe the stain will last for years. In covered areas yes, it does. But my deck area that gets full S.Carolina sun, does not last the year. I re-stained last year and will be doing a layer of water proofing on horizontal surfaces this year in hopes that I won't have to stain again for a while. I am still happy that I bought the water based just because of the clean up and the ease of re-staining even if I feel I had to do it much quicker than if I had used oil based.
Question:	Can I use this on my new cream colored bamboo blinds? Unsure about the method they were colored, but almost no sheen. Want stain protection in kitchen
Answer:	Hard to say without looking at the wood , but if the wood still looks porous enough we're the Stain can soak in some I would think a light coat possibly 2 would do it. It's very thin milky color but dries clear
Question:	I am applying this to a fence. Would you recommend it for fences? Also, if you have used this product how well is it holding up
Answer:	Using it for 10 years, great on fences. Apply W weed oil sprayer. Brush W 4" throw away brush as needed. Time between coats varies W the look you want. 2-3 years looks great. At 5 years fading is noticeable. Apply when cool. Dampen surfaces to get soak in.
Question:	Can I use this on kitchen cabinets made with walnut veneer? My goal is to keep the natural raw, light look but also see the grain, not milky
Answer:	No, don’t use on kitchen cabinets. Instead use water base polyurethane. Easy clean up and is just as good as oil base polyurethane.
Question:	Can this be used to seal laminate flooring
Answer:	It is not for interior use. Also you cannot stain , paint or varnish over Seal-Once products. Seal-Once must be applied to raw wood.
Question:	Can this be used over an oil base stain
Answer:	No.
Question:	What’s the best product for Douglas fir pergola
Answer:	No, this Seal Once product is not made for pergola floors, it has a dull finish. Not shiny. I would think you would want a poly eyrthane, which is durable and has a shine, recommend a semi-gloss. I would suggest you go to Sherwin Williams and consult their opinion.

Product features

About SaverSystems

At SaverSystems, we understand the frustration people feel when they see what they've built deteriorate from the elements. Property is one investment you can bank on, but if it's made with concrete, masonry, or wood it needs to be protected. SaverSystems employs state of the art technology to help protect and save what you build.

SaverSystems has manufactured premium quality, water repellents and protective coatings for over 30 years. We make coatings for a variety of surfaces including wood, concrete, masonry. In addition to the DEFY brand, SaverSystems also manufactures ChimneyRx, MasonrySaver, & ChimneySaver branded products.

All of our products are manufactured in our production facilities located in Richmond, Indiana. Every product is produced under strict quality standards and formulated with the highest quality raw materials available. Our innovative solutions and coatings have stood the test of time, and are trusted by industry professionals and homeowners alike.

• Specially Formulated to be Applied Around & Over Fresh or Salt Water
• Water-based, Low VOC, Non-toxic; Safe for People, Pets, Plants & Marine Life
• Performs like an Oil-Based Sealer Without any Harmful Chemicals or Side Effects
• Superior Nanotechnology Penetrates Deep, Coating Wood Fibers at the Cellular Level
• Creates Flexible Barrier that prevents warping, cupping, rot, mold & algae growth

User questions & answers

Question:	How do appy on a cloudy day in the tropics ? A cloudy day here means.............it's going to rain . How critical is this
Answer:	Yes you may use it for this specific application. As suggested in a comment down bellow, you would want to make sure that it is fully cured before using the shower. Typically it would take 48 hours to cure but it may take longer depending on the environment.
Question:	Can you use a regular wood stain after applying
Answer:	Pressure treated lumber has to be dry.
Question:	I want to use this on a 6x6 wood beam at the opening to my walk-in shower (floor to ceiling). No direct shower spray. Will this seal it
Answer:	I doubt that it will eliminate splitting in wood slices. This simply slows the drying process. You’d need something like PEG to soak slices in. Polyethylene glycol.
Question:	Can it be used on green treated lumber
Answer:	Hello Huck Finn,Anchorseal 2 is used to coat the ends of freshly cut logs. Pentacryl is something you can soak a piece of "green" lumber in to displace the moisture in it. Hope that helps!

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, MARINE creates a flexible, breathable barrier which allows water vapor to escape. This key feature helps prevent damage to wood caused by water intrusion, such as: wood rot, decay, mold & mildew growth, cracking & splitting. Typical wood sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack & peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE uses cutting-edge, nano-particle technology to allow wood to breath and help prevent water vapor damage by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment, easier to apply than solvent based wood finishes and clean up with soap & water. They do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated, but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight. Clean-up brushes or sprayer with warm soapy water.

Choose from 11 Wood Stain Tints

MARINE can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

The Perdura DECK BOSS professional deck stain brush applicator cuts your coating time in half. (pole not included)



Professionals report savings of over $150 on one standard sized deck stain project which is about triple the cost of a DECK BOSS.

This means purchasing a DECK BOSS is the best investment you could make and a must have product for any professional or DIY customer.



Buy a DECK BOSS today, use it and you will understand why Perdura Pro Series Brushes are the best deck stain tools on the market today!



Perdura Pro Series DECK BOSS is an Australian brand and our business focus is simple, supply the best quality brushes on the market while giving the best customer support and service.

Perdura Brushes are sold in many countries around the world, are loved by professionals and have a strong following with customers who are focused on quality and performance.



The DECK BOSS is the ULTIMATE tool for coating or staining large areas FAST! You can load up lots of paint, stain or oil with the 7 x 2 inch design which has a 3 inch filament length.



The DECK BOSS will outlast other brushes on the market and will save you lots of money when compared to deck stain/paint pad application tools.

Pads and rollers are a throw away item whereas the DECK BOSS just requires a simple clean and can be used again and again.



Quality never goes out of fashion so choose Perdura for better value and results!

• ✅ FINISH your DECK STAINING in HALF the TIME and SAVE YOUR BACK in the process - The DECK BOSS is FUN to use and the PROVEN PERFORMER in the U.S. professional deck staining market. - Load up, back brush and coat between cracks in the one action - SUPER FAST application of all paints, stains, sealers to rough or smooth surfaces. (pole not included)
• ✅ PROFESSIONAL MONEY MAKING MACHINE - In the hands of a Professional, the DECK BOSS will save lots of time while providing a higher level of finish. This means more money in your pocket and is an absolute weapon that all Professionals and DIY's should have at home or in the van.
• ✅ #1 RATED DECK STAIN/PAINT BRUSH ON THE MARKET - A must have coating tool for any professional or DIY - See what our Professional and DIY customers are saying about DECK BOSS from the reviews.
• ✅ LOVE the DECK BOSS or return it - Try the BEST RATED Deck Stain Brush on the market 100% RISK FREE - We are so confident this will be the BEST Deck Stain brush you have ever used and will want to tell everyone about - We also provide the Perdura 100% QUALITY ASSURANCE - Superior build - long lasting custom Australian design built to last - Makes a great X-Mas, Birthday, Fathers Day or any day gift for the professional or DIY. (pole not included)
• ✅ FREE BONUS CASE, Brush Comb and Can opening Keyring - Your DECK BOSS pack comes in a hard protective box that looks great and can be used to store after use. We also include a handy DECK BOSS brush comb and can/bottle opener keyring.

User questions & answers

Question:	Can i use a clear deck sealer with it
Answer:	Yes you certainly can! You can use any paint stain or sealer both water and oil based, clear or with pigment for rough or smooth wood surfaces and concrete applications. All the best from Perdura Brushes Australia!
Question:	I will need to get a handle – do you have any particular one to recommend? One more question – I will be using stain that contains oil, what is the be
Answer:	I just used a handle that was on a floor broom/mop.
Question:	Will this work on railing, or is it too large
Answer:	The DECK BOSS is too big for working on rails so for this application, we recommend using the smaller RAPID STAIN brush which is 5 x 1 inch and designed for hand use. Best regards, Perdura Brushes Australia
Question:	What poles do I need to purchase for it
Answer:	The DECK BOSS has a universal thread so will be compatible with most paint poles and even household brooms. It's highly likely that most customers will already have a pole that will fit in their broom cupboard or shed. For professional use, we use a light weight pole with a length of 5-6 feet. Best regards and feel free to contact us again with any further questions.

Product description

Ready Seal stain enhances the natural beauty of the wood allowing the texture and grain of the wood to remain visible. This stain is an oil-based, semi transparent stain and sealer in one, suitable for all your exterior wood projects. It is a unique formula that penetrates deeply to protect and preserve wood from the elements such as mold, mildew and damaging UV rays.

• Requires no primer. Ready Seal is darkest when first applied. It reaches its true color in approximately 14 days. Do not apply Ready Seal over painted or newly stained surfaces. Sealed surfaces inhibit penetration.
• May be applied using sprayer, roller or brush onto the woods surface.
• Requires no back brushing and will nerver leave runs, laps, or streaks.
• Requires no wet-line application, the product will blend itself and can be applied in any temperature range for proper application.
• Requires no diluting or thinning prior to spray applications.
• Subject to or will include a PaintCare recycling fee in the following states: CT, or VT. Not available in CA.

User questions & answers

Question:	Will this peel, flake off after 2 - 3 years
Answer:	I don’t know, I just completed my application to my decking and wood fence about 6 months ago and so far they both look great. I don’t think this product will flake or peel off because is a stain but I think is best if you contact the manufacturer and see what they will advise you. So far under the Phoenix Sun I can see a little fading but I will reapply again in about a year or so. Thanks for the question, Jorge
Question:	Can anyone share what their decks looked like one year later using this product
Answer:	I‘ve used this stain for many years on my decks. I’ve restained the horizontal surfaces every other year, the vertical surfaces every 5 years. I just completely stripped old twp stain off of my deck this spring and stained it in May with one coat of Ready Seal. I thought I probably needed two coats since it was the first staining of a clean deck, but waited to see. It faded quite a bit (not surprised) and I added a second coat earlier today. Based on past experience, I expect this to hold its color well for a couple of years, then I’ll hose it off (not powerwash) and add another coat on the horizontal surfaces in 2 years, and I’ll do the same on the vertical surfaces in about 5 years.
Question:	can this be used on wooden playsets/swingsets? Is it non-toxic
Answer:	It's used on decks quite a bit and I'm not aware of anybody ever having an issue. It's on my deck and more than one child has crawled around on that without growing a third eye.
Question:	Can someone who purchased the light oak or golden pine color upload a photo to see how it turned out, please? also, the longevity on a fence? thanks
Answer:	Check out pics on the Ready Seal website. Color varies based on wood type. I’m not sure about longevity on a fence, I’ve only used it in decks. With decks I’ve found that after getting the original staining established (two coats for decks in my experience), it lasts for about two years, then I hose it off (not powerwash) and add another coat to the horizontal surfaces. I do the same on the vertical surfaces about once every 5 years.

Product description

The Chapin Clean 'N Seal Sprayer is ideal for the homeowner. The 1-gallon translucent poly tank has a large funnel-top opening for no mess filling and cleaning, poly shut-off and 3 fan nozzles for a fine, medium and coarse spray pattern. Includes an on-board Total Spray Control spray shield that protects siding. We also offer full technical support via our Customer Service Team at 800-950-4458 and product information at chapinmfg.com

From the Manufacturer

Our residential, professional and industrial sprayers are designed to meet the needs of your lawn, garden, home, farm, professional, or commercial project. With a focus on innovation gained through industry knowledge, Chapin products have been manufactured with excellence in the United States using global components for more than 130 years. We offer full technical support at 800-950-4458 to help you find the right sprayer for your application or visit our website at chapinmfg.com for more product information and specifications. Chapin, the way to spray since 1884.

• 1-Gallon funnel-top, translucent tank for easy filling and cleaning
• Compatible with deck cleaners, sealers and transparent stains
• 3 poly fan nozzles for fine, medium and coarse spray pattern
• Total Control Spray Shield to protect siding
• Ergonomic handle for easy pumping and carrying
• Hose length: 34.0 inches

User questions & answers

Question:	Will the sprayer work with semi-transparent stains
Answer:	If you mean automotive roll bars then an automotive or marine treated pain in a metallic finish would be better choice than this light project coating. Rustoleum website very helpful
Question:	Can this sprayer be used with wood preservative which can be thick
Answer:	Yes, it will work on metal. I used it on metal but did take two coats to cover evenly. Keep in mind that it has more of a matte finish, and not at all glossy as the can cap would have you believe.
Question:	can fence paint be used in this sprayer. I need a sprayer to paint my yard fence.? Thank You
Answer:	Only if she has a heart of gold. Even still, the shades probably won't match. You may have to do a swatch test and visually compare first.
Question:	Can I use this sprayer for treating my deck with Thompson's wood protector/preservative which can be thick. Regular garden sprayers clog up
Answer:	I’ve sprayed lace with it and I imagine it will be fine for a day or so

Product description

The Wagner Control Spray Double Duty uses HVLP (High Volume Low Pressure) air power technology to spray thin materials such as stains, sealers, urethanes, varnishes and enamels. It features a two-stage indoor/outdoor rated air turbine for a continuous flow of material and air, producing a professional fine finish whether staining your deck or refinishing your kitchen cabinets. A three-position air cap adjusts the spray pattern for either vertical fan, horizontal fan or round pattern shapes to most effectively get the job done quickly and with the best even coverage. Material flow is easily controlled with the variable trigger and allows the user to spray ½-inch to 9-inch wide patterns and up to 4.9 fl. oz. per minute. The Wagner Control Spray sets up in less than five minutes and cleans up in less than ten. Package includes a Control Spray Double Duty Sprayer, 1 quart container, 1.5 quart container, and viscosity measuring cup.

From the Manufacturer

The Wagner Control Spray Double Duty uses HVLP (High Volume Low Pressure) air power technology to spray thin materials such as stains, sealers, urethanes, varnishes and lacquers. It features a two-stage indoor/outdoor-rated air turbine for a continuous flow of material and air, producing a professional fine finish whether staining your deck or refinishing your kitchen cabinets. A three-position air cap adjusts the spray pattern for either vertical fan, horizontal fan or round pattern shapes to most effectively get the job done quickly and with the best even coverage. Material flow is easily controlled with the variable trigger and allows the user to spray ½-inch to 9-inch wide patterns. The Wagner Control Spray sets up in less than five minutes and cleans up in less than ten.

• SUPERIOR PERFORMING HVLP SPRAY GUN: This HVLP sprayer utilizes a two-stage, indoor/outdoor rated air turbine to provide a fine finish on your surface.
• SUPERIOR NOZZLE: The sprayer comes with a versatile nozzle that can be used to spray countless materials and projects. The nozzle is durable and long lasting compared to cheap alternatives. This one nozzle is all you need for your next project!
• PERFECT FLOW EVERY TIME: Adjust the material volume by turning the regulator on the trigger of the spray gun to achieve a smooth material flow. You can also adjust the spray pattern to spray horizontal, vertical or round
• USE WITH A VARIETY OF MATERIALS: Applies thin materials such as stains, sealers, urethanes, varnishes and lacquers. Also sprays latex paints, some thinning may be necessary
• GREAT FOR ANY PROJECT: Includes two material cups, 1 quart for smaller interior work and 1.5 quart for larger exterior work. Perfect for transforming decks, patios, fences, furniture, cabinets, and more

User questions & answers

Question:	Is this an electric sprayer or do you need an air compressor
Answer:	No air compressor is needed. It is electric powered, not air.
Question:	Do I need an air compressor for this? Or is this a stand alone tool
Answer:	The base unit has a blower or low-pressure compressor built in, no external compressor required. Make sure the base is sitting where it will pull in clean air, no dust or debris.
Question:	can this be used for oil base paints
Answer:	Yes. Cleaning oil-based primer took forever to clean because you must use mineral spirits and be sure to get every bit of it off the interior parts. Cleaning latex-based primer and paint out of the sprayer with soapy water was much easier but still time-consuming, especially since I tried to get every bit of primer/paint off the outside of the sprayer and pump in case I want to sell it if we ever finish the kitchen-painting project. I am an almost elderly homemaker, amateur painter, and I was able to use it successfully.
Question:	Has anyone use it as a Spray tan system
Answer:	I have. The turbine has similar specs (i.e. correct pressure and airflow) to some other HVLP spray tanning systems; however, for me the cup size was too large and spray pattern on the included nozzle made it difficult to not overspray. I purchased a wagner "spray tan cartridge attatchment" aka "Wagner Detail Front End Kit" (ASIN B00FDZDO32). It works ok but the cup size is still fairly large and tended to overspray . I have since replaced that gun with a "Maxi-Mist Spray Tanning Gun Replacement Lightweight" ($35 on ebay) and am happy with the results even though I had to adapt the hose to fit. Maxi-mist's MaxiMist™ Evolution TNT Spray Tanning System looks like the wagner painted all black and I wonder if the front end gun ($50) is compatible. I don't use this professionally but can say its works, especially with a purpose made gun. I got best results with the pressure set just above minimum.

Product features

Get Your Projects Done Quickly

The Wagner Control Spray Double Duty applies coatings quicker than a brush or roller and provides a great finish on your surface. It’s perfect for projects like decks, fences, trim, furniture and more.

Two Paint Containers Included

Whatever your project, the Control Spray Double Duty has you covered. It includes a 1 quart container for smaller interior work and 1.5 quart for larger exterior work.

Use with a Variety of Materials

This paint sprayer applies thin materials such as stains, sealers, urethanes, varnishes and lacquers. It also be used with thinned latex paints.

Furniture

Refinish and update your old furniture by applying a new coat of stain or paint with the Control Spray Double Duty.

Small Decks

Ditch the brushes and use the Control Spray Double Duty instead to have the job done in a fraction of the time.

Trim

Renovating your home? Use the Control Spray Double Duty to apply a professional-like finish.

• Eco-friendly, Non-toxic; Will not harm pets, marine life, plants or people
• Ultra-low VOC, Water based formula, Soap & water cleanup, Will not peel
• Two coat application with clear formula, Flexible, breathable barrier
• Prevents warping, cupping, wood rot & decay, staining caused by leaves, pollen, mold & mildew
• Creates a UV barrier to help prevent fading, Tinted formula provides added UV protection

User questions & answers

Question:	Can this be used on composite wood
Answer:	It went on semi clear over wood furniture. Dry it looks clear. Did not darken the wood at all.
Question:	Can this be used on kitchen caninets
Answer:	This will dry clear, but it is really more of a sealer than a finish. It leaves it feeling almost unfinished but will repel water. Not sure about using it over a stain. I would check in to that before using it.
Question:	The item is described as "White" but the can in the picture says "clear". Which is it
Answer:	how long does it take to dry in 70 degree dry sunny weather
Question:	Can I use this sealer for a wooden animal enclosure? I’ve stained it already, just looking for a finish. And will it dry clear
Answer:	Yes the clear MARINE can be painted or stained. Or you can purchase a tint for SEAL-ONCE and use the MARINE as a sealer and stain. MARINE Features: • Clear formula can be painted or stained after treatment • Tinted formula provides additional UV protection • Available in 11 semi-transparent tint colors • Eco-friendly, Non-toxic; will not harm pets, plants, people or marine life • Ultra-low VOC, Water based • Can be applied around or over fresh or salt water • Flexible, breathable barrier, Stabilizes & protects wood • Prevents warping, cupping, wood rot & decay • Resistant to salt water spray • Prevents mold, mildew & algae growth • Soap and water cleanup

Product features

The Science of SEAL-ONCE and Innovative Use of Nanotechnology in Wood Finishes & Stains

Unlike many top-coat sealers sold today that trap moisture below the surface, EXOTIC penetrates deep below the surface of wood. This creates a flexible, breathable barrier which allows water vapor to escape, helping prevent damage caused by water intrusion, such as rot, decay, mold & mildew growth, cracking & splitting. Typical sealers form a barrier on the surface of the wood, trapping moisture below the surface. As the water evaporates, it causes the surface coating and the substrate to crack and peel, leaving a broken surface that requires continued maintenance and is susceptible to additional damage. SEAL-ONCE prevents this by protecting wood from the inside out.

Water-based Product that Will Not Harm People, Pets, Plants, Livestock or Marine Life.

SEAL-ONCE products are ultra-low VOC, low odor, non-toxic, non-flammable and non-ozone depleting. They are safer for the environment, easier to apply than solvent based wood finishes and clean up with soap & water. They do not contain nitrates, phosphorous compounds or heavy metals like many Oil-based sealers & stains on the market today.

Quick & Easy Application

Apply first coat with a synthetic brush; pump-up garden sprayer; air-assisted; and/or airless sprayer. Use 15-17 tip and medium to coarse spray pattern. When spraying, always back brush for best results. Second coat can be applied once first coat has penetrated, but is still damp. Second coat must be applied within one hour of applying first coat. For best results, apply in the shade and out of direct sunlight. Clean-up brushes or sprayer with warm soapy water.

Choose from 11 Wood Stain Tints

EXOTIC can be tinted for use as wood stain in any of the 11 color tints available: Clear, Light Brown, Natural, Brown, Mahogany, Redwood, Bronze Cedar, Cedar, Black, Battleship Gray, Shale Gray & Cape Cod Gray. The tints are sold separately and when mixed with Clear, the tinted formula provides additional UV protection from harmful sun rays.

Surface Preparation & Coverage

Approximate coverage: 250-350 sq. ft./gallon per coat. Actual coverage will vary due to the porosity of the surface. All surfaces should be cleaned with SEAL-ONCE All Wood Cleaner before sealing for best penetration and performance. Remove all old coatings, dust, debris and loose material. Remove oil, grease, algae, grime, mill glaze and mold and mildew stains with appropriate cleaners.

Product description

Designed to work with all Cabot stains. Adjustable handle for comfortable application. Reduces application time.

From the Manufacturer

Designed to work with all Cabot stains. Adjustable handle for comfortable application. Reduces application time.

• Pad application works the stain into the wood fibers and cells effectively as well as glides on the surface, eliminating the need for back brushing
• The result is a smooth finish that can be done faster than traditional brushing. Pad applicator provides even coverage
• Extension handle may be screwed into the handle of the applicator to reach high areas

User questions & answers

Question:	can it be used to apply paint
Answer:	Absolutely
Question:	Can I use this to apply poly
Answer:	I can't say forsure. But I wouldn't. I think poly requires a proper poly brush. But at this reasonable price..... But it and check it out for yourself.
Question:	is this sheepskin
Answer:	Is not sheepskin more like a sponge but worked well for this stain
Question:	can you use on rough cut lumber
Answer:	I used it on deck boards, there were a few rough spots. I attached a broom handle and it worked GREAT. Very consistent coverage.

Product features

Wood Stain Pad Applicator

Pad application is the preferred method because it works the stain into the wood fibers and cells effectively as well as glides on the surface eliminating the need for back brushing.

Application Instructions:

Step 1

• First, heavily coat the open end-grain of the board.

Step 2

• Work 1-2 boards at a time, from one end to the other in smooth strokes.
• To avoid lap marks, make sure that the leading edge is kept wet and that the wet stain is brushed into wet stain.

Step 3

• Finish with a heavy coat at the open end-grain on the opposite side you started with ending as you began.