14 best clear epoxy

Product description

PC Products PC-Clear Epoxy Adhesive Liquid . PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

From the Manufacturer

PC-Products, celebrating 60 years of “Fixing Your Things”, with quality, reliable repair products. Repair solutions for just about anything that needs repair or what you can manage to break. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• Clear epoxy adhesive liquid bonds wood, metal, glass, ceramic, concrete, and fabric
• When mixed it turns opaque initially then clear to full cure to blend in with bonded material
• Continuous service temperature range from -20 to +200 degrees F
• Provides work time of approximately 4 minutes, cure time for function of 1 hour, and full cure time of 24 hours
• Forms tough bond for durability

User questions & answers

Question:	Is it FDA approved
Answer:	It does not have an FDA approval. But I wont be eating this it does bond well on plastics and is solid, washable and clear. Held the item I used it on very well.
Question:	Does this glue settle to a smooth, shiny finish
Answer:	Smooth, shiny, tacky, &tough.
Question:	Will it repair broken Indian pottery
Answer:	This worked very well to repair some handmade ceramic pottery of mine. I can hardly see where the crack was.
Question:	can this be used to glue a sheet of stainless steel to wood? thanks
Answer:	As the product details say, "used to bond WOOD, METAL, glass, ceramic, concrete, and fabric."

Product features

PC Products PC-Clear Epoxy Adhesive Liquid

PC-Clear is a completely clear liquid epoxy. PC-Clear is formulated to remain clear during and after its curing time. PC-Clear is very durable and flexible making it unlike many liquid epoxies. If disguising a repair or the absence of color is needed, PC-Clear is your product of choice. PC-Clear demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. Note: PC-Clear will not bond to wax paper, Teflon, Polyethylene, and some other plastics. There are hundreds of plastics in thousands of combinations. Test a small area when in doubt.

Great for high detail fixes

PC Clear is excellent for repairs and projects that must be less visible such as art objects or collectibles.

Strong flexible and resilliant bond

Durable and flexible yet demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water.

Proudly made in the USA

All PC Products are made in the USA and shipped from Allentown, PA.

About PC Products

Protective Coating Company was founded and incorporated in 1954 by John (Jack) Long as a service company providing customers with a waterproofing product called 'Spraycrete'. Soon afterward, our signature product PC-7 paste epoxy was developed. This product put Protective Coating Co. on the map. Today, we make a full line of repair and wood restoration products. From wood repairs to concrete repairs and most repairs in between...We have you covered.

Now in its 3rd generation, Protective Coating Co. still maintains their small town philosophy and remains a family run company committed to manufacturing quality products. Every batch of mixed material is still hand tested to insure our high standard of quality. In each of our products you will find more than just a product that performs as intended, you will find a team that stands behind their products. From Concrete to Wood restoration and heavy duty permanent repairs, we have you covered.Yeah; We can fix that!

• 👍 FORMULATED for River Tables, Live Edge Table,s Countertops and Bar tops! The PERFECT Art Resin for using with Pigment Powder, Mica Powder, Alcohol Ink, Resin Dyes and Resin Tints!
• 👍 SELF-LEVELING & HIGHEST SUPER GLOSS! CLEAR, EASY TO CLEAN, SCRATCH & WATER RESISTANT!
• 👍 HIGHEST UV RESISTANCE! PERFECT Epoxy Resin Color Pigment Mixing Every time!
• 👍 DIY EPOXY KIT MIXER INCLUDES: Clear Epoxy Resin And Hardener!
• 👍 We Are the Original Manufacturer, and We've Been in this Business for over 60 years! 100%MADE IN THE USA!

User questions & answers

Question:	Hows this for knife scales and pen blocks
Answer:	Awesome
Question:	What is the work time allowance before it becomes gelled
Answer:	It will greatly depend on the ambient temperature, but at 77 degrees, you will get about 25 minutes of working time before it starts to gel.
Question:	How do i add colour to this? And what primer do you recommend
Answer:	We sell pigment you can add to this product. This product also works great with Mica Powder and Alcohol-based Dye. As far as primer goes, you shouldn't really need a primer before applying this product.
Question:	Can this be poured on acrylic paint? If yes how long should the paint cure before application
Answer:	You can pour it over Acrylic Paint, but you want to wait a minimum of 48 hours for the paint to dry, before doing so.

Product features

About Super Epoxy Systems (Superclear, Liquid Glass)

We are the Original Premier Manufacturer of Epoxy Resins manufactured in the USA, right here in Saint Petersburg, Florida, and have been manufacturing resins, putties and adhesives for over 50 years! We only use high grade premium ingredients and UV additives within our epoxies to give you an unparalleled final result! You’re in good hands with us!

We are completely dedicated to providing you with the highest grade products, service and we are always available for technical support, or touch base with us on Instagram!

Mirror-Like Crystal Clear Finish

Our Superclear Epoxy resin kit is a two part epoxy, pourable, self-leveling and is scratch and water resistant, leaving you with THE HIGHEST SUPER WET GLOSS finish with unparalleled depth and clarity. Superclear is formulated to use within all coating and step casting applications such as: Coffee Tables, Step Pour River Tables, Side Tables, Bar Tops, Countertops, Small Void Filling Live-Edge Tables, Step Casting Art, and Even Small Jewelry Castings! If you have a large project, make sure to mix up no more than a Half Gallon at a time. This product is mass dependent, meaning the more you mix, the hotter it gets, the quicker it cures, and the less working time you will have.

High-Grade UV Resistance

All epoxies will turn yellow overtime. What makes our Superclear Epoxy resin crystal clear kit different is our specific high-grade additive formulation. Ours will yellow less and remain ultra-crystal-clear over a longer period of time than any of our competitors. Our products are made for you, and made to last, bar none.

Integrate Color With Ease

Perfectly suited for accepting and dispersing mica powder pigments, liquid pigments and alcohol inks and dyes! Liquid Glass is the ideal epoxy for evenly distributing color and suspending inks and powders. *Paint, acrylic paint and oil based paint are not recommended to use with epoxy, and can have negative results.

Is It Food Safe?

To consider a product food safe, the end product must be tested. Since every project is made by a different artisan and not in the same exact way, and our product comes in two parts that must be mixed, every finished piece must be tested. Once Super Clear Table Top Epoxy has cured, it becomes safe, per FDA code, 21CFR175.300 which states "Resinous and polymeric coatings may be safely used as the food-contact surface of articles intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food" and can be used as a "functional barrier between the food and the substrate" and "intended for repeated food-contact and use.”

100% MADE IN THE GOOD OLD U.S.A.

It is amazing to be able to provide a high quality product to professional and DIY makers, but more importantly, make it in America. We are honored everyday, not only be a part of the maker community, but also have the opportunity to form friendships with those makers and be fortunate enough to help them with their business.

• Designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Art work, and other applications
• Self Leveling and High Gloss U.V. Resistant Formula
• Produces a Tough, High Gloss, Water Resistant Coating
• Eliminates Craters, Crawling and Fish Eyes
• Blush Resistant

User questions & answers

Question:	I ran out in the middle of a project. Next batch wont arrive until after the 12 hour window for multiple coats. Should I just sand before next coat
Answer:	Yes, lightly sand to help your next coat adhere better to the last one.
Question:	I have wood table that I want to make shine, would this product will give me what I'm looking for
Answer:	Yes it will make the table very glossy but it is not an easy process . If you have not worked with epoxy much you will want to practice before you use it on your table.
Question:	What are the instructions for installation? Other answer says practice first, but I'm wondering what possible complications might be
Answer:	Possible complications we found is not mixing this properly therefore it will not harden.
Question:	Is there a recommended maximum depth for this
Answer:	1/8 normal. I have done 2 inch at time but you really need deep pour product for river table.

Product features

High Gloss & Durable

High performance and Crystal clear! Produces a tough, high gloss, water and scratch resistant coating.

Versatile

Can be used for a wide variety of applications, art, and home projects.

FDA Compliant

FDA Compliant formula for artistic items used around food, such as trays, tumblers, and glassware.

Easy 1:1 Self-Leveling Formula

Use our product with ease, featuring an easy 1:1 self-leveling formula!

Beautiful and Versatile, Crystal Clear Finish...Every Single Time!

Step 1: Measure

Pour equal parts of resin and hardener into a clean mixing container or graduated mixing tubs, using a 1:1 ratio (by volume) It is crucial that the product is measured accurately and mixed thoroughly. Measure 1 part RESIN to 1 part HARDENER by volume. Do NOT vary this ratio. Our Epoxy is formulated to cure at a specific mixing proportion, and any variances can cause the product never fully to cure. We recommend always pouring the HARDENER into your mixing container first, followed by the RESIN. This will help the two components mix thoroughly.

Step 2: Mix

First Mix: Mix with a flat bottom stir stick or spatula being sure to scrape the sides and bottom of the container as you go. Your mixture will appear hazy at first, and then become more transparent as the resin and hardener molecules begin to blend within three to five minutes.

Second Mix: Pour the Resin and Hardener from your first container into a second container scraping all the mixture out from the sides and bottom of the cup. Thoroughly mix for an additional three minutes.

Step 3: Seal Coat Stage

The best way to apply a seal coat is to start on one end of the table and pour the resin all the length of the surface, zigzagging as you go. Then use a foam brush to drag the resin across the entire surface to achieve an even coat. The epoxy cures rather quickly in the container, so it is necessary to paint the seal coat on quickly or mix up a smaller amount so that it does not cure in the container while you are still working on it. The seal coat does not need to be smooth as the flood coat will fill in the brush strokes and irregularities making it crystal clear. Once the entire surface is sealed, wait 4-6 hours to pour the flood coat. Do not exceed 10 hours or you run the risk of the flood coat not blending into the seal coat flawlessly.

Step 4: Flood Coat Stage

Each flood coat self-levels at approximately 1/8” thick. If depths thicker than 1/8” are desired multiple coats are necessary. You must wait at least 4 to 10 hours between flood coats. The epoxy will still be tacky so the next pour will stick to it.

The best way to apply the flood coat is to start on one end and pour the resin the entire length of the surface, zigzagging as you go. After you are finished pouring, set the container down. Do NOT try to scrape anything else out of the bucket. Because you are pouring about three times the amount of product you did with the seal coat, the material will immediately start to flow out.

Step 5: Remove Air Bubbles

Once you have sufficiently covered the entire surface with your flood coat, you will begin the process of popping air bubbles. The best tool for removing bubbles is a small propane torch. Hold the flame approximately 6 to 10 inches away from the table top and quickly sweep across the entire surface using an ironing motion. You will immediately see the bubbles start to pop. Do this until all the bubbles are gone from the surface of your table.

* After pouring your epoxy, it is common for air bubbles to form. Bubbles can continue to develop for up to 60 minutes after the curing process has begun. The most efficient way to get rid of them is to run a blowtorch over the surface sporadically 10 - 15 min at a time.

Step 6: Curing Process

After applying your final coat, the product should be kept in a clean, dust-free environment at a minimum of 75-80° F degrees. The product takes approximately 12-14 hours to dry to the touch. However, the product should not be put into any use for at least three days which will allow it to achieve sufficient hardness to resist scratching. At temperatures below 75 F, the product will take longer to cure and might not cure to complete hardness.

Product description

Clear Epoxy Resin Art Resin Epoxy 1 Gallon Kit

• Premium epoxy kit - Aquaseal epoxy resin and hardener kit delivers extra durable results ideal for boat building, composite construction, house repairs, table top epoxy resin projects and more!
• All you need included - Aquaseal marine epoxy resin kit includes : resin half gallon bottle, hardener half gallon bottle , 2x measuring cups, 2x plastic spreader and 2x plastic stirrers. Everything you need to start your clear epoxy projects.
• Easy to use - Mix 1 part epoxy resin and 1 part hardener for 20 minutes of work time on your marine epoxy projects. Use on wood, fiberglass, reinforcement fabrics, etched aluminum, bare steel, and lead.
• Faster curing and harder - Strong, clear epoxy resin, fully UV-resistant cures faster and harder, ideal durability for boat repair, table top epoxy and countertop epoxy projects.
• Customer service - Please read the instructions provided with the Aquaseal marine epoxy before use. If you have any questions or issues, please don’t hesitate to send the seller a message through Amazon and we will respond within 24 hours.

Product description

Alumilite Amazing 2 part clear coating and casting resin. Made in USA.It is used to make extremely detailed designs out of your Amazing Putty mold or as a protective layer of furniture and more

• Easy to use and long lasting
• This package contains two 8 ounce bottles of clear coating and casting resin (mix portions out of each bottle together in order to create a casting)
• Also includes two stir sticks, three measuring cups that fit up to 2 tablespoons of liquid and easy to follow instructions
• It is used to make extremely detailed designs out of your Amazing Putty mold or as a protective layer of furniture and more
• Made in USA

User questions & answers

Question:	Has anyone experienced yellowing of the liquid? I bough a box but it has been a couple months since using it and now it's yellowed
Answer:	YES. I opened mine about 3 months ago and stored the remaining resin sealed and in a closet...the next time I opened it, the resin had turned very yellow. Also, anything I pour with that resin now has a yellow-ish cast to it. The actual resin items I've made have also yellowed a little bit over time. I won't be using this brand anymore for that reason.
Question:	If I used this to coat a shot glass, would the alcohol react to it
Answer:	Yes. I tried making a resin mold using hot glue. Alcohol is the only thing that removed the resin from the mold but it warped the resin. That's how I know.
Question:	It's been three days and it's still a little tacky. I used a 1:1 ratio in a thin layer. What can I do
Answer:	Depends on how much you were trying to make. I found success rate of curing is inversely proportionate to how much I use. The smaller the amount, the larger the margin for error. Because the density is different for the two parts, it's nearly impossible for me to get an exact 1:1. I even use medical grade measured sterilized medicine cups. Anything less than 20mL doesn't cure for me. So I work with several projects at a time so as not to waste it. Also make sure to slowly mix for minimum 3 minutes.
Question:	Can I use this on a product that will touch food
Answer:	Yes. Resin must be mixed 1:1 by volume (not weight) in a smooth sided cup to ensure complete blending. Allow a full 7 day cure before using castings for food purposes. Pieces are suitable for cold or warm food contact only. Cured pieces are not dishwasher, microwave oven or conventional oven safe.

• Everything you need included - our art resin kit comes with bonus items so you can get started right away: 2 x 3.38 ounce measuring cups with spouts, 5 x wooden sticks for mixing and a plastic spreader to ensure an even finish.
• Perfect for artwork or jewelry - the Dr Crafty epoxy resin kit is ideal for use in jewelry making, crystal clear coating, casting and much more.
• Straightforward to use - easy to mix and no confusion, just mix one part resin to one part hardener and then you'll have 45 minutes of work time at room temperature to produce you're best artwork!
• Crystal clear will not yellow - unlike cheap alternatives this epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing unlike others on the market as well as being non-toxic.
• Read the manual carefully - Please read the instruction manual provided with the DR.CRAFTY epoxy resin kit closely before use. If you have any questions or issues regarding the kit please do not hesitate to send the seller a message through Amazon and we will respond within 24 hours.

User questions & answers

Question:	Is this enough to cover a 12' x 3' table top
Answer:	Yes.
Question:	I ordered this and instead of getting this exact product, they gave me a smaller size. how do i email them to get the product i actually ordered
Answer:	Yes it is, I’m very pleased with this swing set. Very durable my grandchildren loves it. Ages 3, 8, and a 9 year old.
Question:	How to I get a copy of instructions? It didn’t come with the package
Answer:	It’s a Christmas gift still in the box.
Question:	Can this be brushed on like a clear coat? I want to mix it with color change pigment
Answer:	“...supports kids weighing up to 100 lbs. each, up to 600 lbs. total “ Found under features and details

Product features

Practical & Convenient.

_____________________

Dr. Crafty Epoxy Resin is here to exceed your expectations. We proudly provide you a formula that allows you to bring you projects to life with no unnecessary stress!

• 2 Part Epoxy Casting Resin Kit.
• Total Of 16oz.

.

All You Need & More!

_____________________

For Pros & Beginners.

Always wanted to get into DIY projects? Or maybe you're already experienced in homemade crafts? Our Epoxy Resin set gives you all the tools you need to start creating!

Get Creative!

Our art resin kit comes with everything you need, so you can get started right away: 2 x 3.4 ounce measuring cups with spouts, 5 x wooden sticks for mixing and a plastic spreader to ensure an even finish.

.

Get Your Formula Ready!

Dr. Crafty Epoxy Resin is ready whenever you are, just mix it and use it straight away according to your needs. We're ready for your next move!

Reliable Consistency.

Our formula was developed to help you every step of the way. We give you the reliable consistency you've been looking for, so you can show off your incredible craft skills!

Remove Bubbles.

Here's the cherry on top! Make your last touch the most important one. To achieve that perfect, clear & strong Epoxy look make sure to use the Heat Gun to get rid of the air bubbles and other undesired features.

Crystal Clear Outcome!

_____________________

Dr. Crafty Epoxy Resin is what you've been looking for. We promise that our formula is not only easy to use, but also ready to make your projects look like the ones from viral videos about DIY crafts.

This epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing as well as being NON-TOXIC.

.

We are here for you!

_____________________

In Dr. Crafty we care about our customers. Same as you, all of the Dr. Crafty team members are handyman amateurs and DIY enthusiasts! That's why we provide you the best products possible to help you with all of your projects, no matter how big they are.

.

User questions & answers

Question:	Can you sand this product
Answer:	It should have come with a card outside the box with instructions if not then u can click on the brand name on ur order list to email the company. It's very easy just says to mix 50% of each and mix for few min til consistency is even then pour. Takes about 24-48 hrs to set completely. Rinse cup and stir stick with soap n hot water to reuse
Question:	How soon can it be ised on a bar top
Answer:	This is ok, but please make sure to use pigment suitable for epoxy resin, for example, epoxy resin is not suitable for use with acrylic paint.
Question:	How big of a pour does the kit make? Looking to make a kitchen table
Answer:	Mine It’s blue and green , slide blue
Question:	Have a table 55in long 35 wide 3in deep would a 3 gallon kit give me enough
Answer:	Yes, I added a better type of swing instead of a plastic seat. Just bought new eye bolts.

Product features

About Super Epoxy Systems (Superclear, Liquid Glass)

We are the Original Premier Manufacturer of Epoxy Resins manufactured in the USA, right here in Saint Petersburg, Florida, and have been manufacturing resins, putties and adhesives for over 50 years! We only use high grade premium ingredients and UV additives within our epoxies to give you an unparalleled final result! You’re in good hands with us!

We are completely dedicated to providing you with the highest grade products, service and we are always available for customer technical support, whether you call, or touch base with us on Instagram!

Deep Pour 2”- 4” Inches Plus!

Not only can you pour Liquid Glass Deep Pour Epoxy thicker at 2-4 inches and higher, but it is harder, to protect it from damage, more heat resistant to prevent warping, and more stable, to provide a strong structure with no flexing.

These attributes are what differentiates Liquid Glass from the competition! You’ll find nothing more clear, harder or more workable!

Practically Bubble-less Crystal Clear Finish

Our Liquid Glass Deep Pour Epoxy resin kit is a two part epoxy, and has a thinner viscosity with bubble releasing attributes that assist in giving the finished product a practically bubble-less finish with unparalleled depth and clarity. Liquid Glass is formulated to use within all casting applications such as: River Tables, Void Filling Live-Edge Tables, Casting Art, and Even Small Jewelry Castings as Small as 4ml’s! If you have a small project like a ring mold or jewelry, make sure to mix up no less than a pint at a time. If mixing less than a pint, it is much easier to mix the incorrect volumes, which is a common mistake, leading to curing issues.

High-Grade UV Resistance

All epoxies will turn yellow overtime. What makes our Liquid Glass Deep Pour Epoxy different is our specific high-grade additive formulations. Ours will yellow less and remain ultra-crystal-clear over a longer period of time than any of our competitors. Our products are made for you, and made to last, bar none.

Integrate Color With Ease

Perfectly suited for accepting and dispersing mica powder pigments, liquid pigments and alcohol inks and dyes! Liquid Glass is the ideal epoxy for evenly distributing color and suspending inks and powders. *Paint, acrylic paint and oil based paint are not recommended to use with epoxy, and can have negative results.

100% MADE IN THE GOOD OLD U.S.A.

It is amazing to be able to provide a high quality product to professional and DIY makers, but more importantly, make it in America. We are honored everyday, not only be a part of the maker community, but also have the opportunity to form friendships with those makers and be fortunate enough to help them with their business.

• 1:1 Ratio By Volume & EASY TO USE. Teexpert art epoxy resin AB adhesive kit is perfect for artwork art craft cast resin, also for coating epoxy. Very easycast resin epoxy with instructions is perfect for starter beginner and professional artist adult.
• CRYSTAL CLEAR & SELF LEVEL. The easy clear cast craft resin epoxy pour kit is crystal clear casting and coating system. To ensure better self level effect, please complete the stirring in 3-4 minutes, and pour into the molds as soon as possible.
• HARD AS A ROCK & NO BUBBLE. The leisure art craft DIY resin epoxy kit is fast curing and hard as a rock if you ensure 1:1 ratio by volume, and stir thoroughly. No bubble if stir evenly and slowly.
• WIDE USE & NON TOXIC. The art craft crystal clear epoxy resin and hardener kit is for Jewelry Wood metal steel artwork drawing canvas paintings woodworking sculpture flowers animals earrings necklace ring keychain hair sticks eggs or other creative projects. A little smell when stirring, non toxic, but suggest PPE when handling.
• 100% MONEY BACK & SERVICE. For any reason you are not 100% happy with the epoxy resin, please feel free to Contact Us. We will respond to you within 24 hours and assist you with a refund at no additional cost.

Product features

Step 1

Prepare Teexpert epoxy resin and hardener kit, epoxy resin molds, glitter, colorant.

Step 2

Press the lid to open.To avoid children open it by mistaken, we designed the lid.

Step 3

Measure 1:1 by volume.

Step 4

Pour resin and colorant together into a mix cup.

Step 5

Mix slowly until absolutely no swirls are seen, scrape sides and bottom thoroughly.The more slowly stir, the less bubbles appear.(Time:3-4minutes).

Step 6

The thin the resin, the better self equal effect. Slowly pour mixed resin down the side of the mold to avoid introducing additional bubbles.

Step 7

Wait 1 hour to cure, to keep the shape of the flower(if you not place additional such as flower, please ignore this steps).

Step 8

Place in the flower (if you not place additional such as flower, please ignore this steps).

Step 9

Wait 4-6 hours, the first layer rein has hard, to avoid the flowers float when the second layer poured(if you not place additional such as flower, please ignore this steps).

Step 10

Repeat 2-4 steps(if you not place additional such as flower, please ignore this steps).

Step 11

Pour the second layer to the mold slowly, the reason of 6-8steps is avoid the additional float(if you not place additional such as flower, please ignore this steps).

Step 12

Allow to cure for 24 hours(heat and mass will dictate the amount of cure time required - the bigger the mass the faster it will cure, as well as the warmer the air temperature the faster it will cure - Note: thin areas take longer to cure).

• Use our clear epoxy resin for all of your casting AND coating applications. Hardens crystal clear and hard as a rock
• Rigorous testing was done to ensure that our resin is a perfect match for all of our glow in the dark and other craft pigments
• Our resin is self leveling, self degassing, odor free, resistant to yellowing from sun exposure, and is made in the U.S.A.
• One to one mix ratio is fool proof and has a forgiving 40 minute work time
• Use to coat tables and bars, encapsulate objects, cast figurines and jewelry, make resin paintings and more

User questions & answers

Question:	How thick can I pour this resin
Answer:	If you set up a damn you could pour it fairly thick (1/4" or so). But depending on the area you wanted to cover you might want to buy more resin. These are about the size of bottles that Bubbles come in. You could also do multiple layers, but that might take a while. Amazon is a good resource, but YouTube has more examples.
Question:	Could I use this to cover a photo mounted on cardboard? If yes, what would be the longevity until the photo underneath would yellow
Answer:	Yes you can definitely do that. Just glue down the photo first with a glue stick and then brush a thin layer of epoxy over the photo and cardboard before doing the actual pour. This will hold the photo in place and prevent air bubbles from escaping from the paper and into the thick coating of resin. As long as the epoxy is kept indoors it should stay clear for a long time. It should only yellow if it is exposed to the sun too much.
Question:	Is this fda approved for use with products that potentially touch food
Answer:	It is okay to use for a table top where food may spill and touch it for a short amount of time but it should not be used for any food containers or in an application that has prolonged contact with food.
Question:	What is the total cure time
Answer:	I've been making dice with this resin, and although it comes out amazingly well, I'd let it cure the full 72 hours before removing from the molds. I have dice that are still tacky after 36 hours. It's worth the wait.

Product features

Artist Approved Epoxy Resin Designed For Your Imagination

Our epoxy resin can be used on canvas, wood, concrete, granite, ceramics, precious stones, rocks, paper, and more to give a durable, glass-like, and crystal clear finish. Our customized epoxy resin formula can also be used for casting objects using any suitable mold available. Whatever your creative idea, art project, or material, bring it to life and make it shine with our specially formulated art resin.

Product Specifications

• Material: Epoxy Resin and Hardener
• Longevity: Resists yellowing due to UV exposure but should not be left permanently outdoors as all epoxy resins will eventually yellow from sun exposure
• Safety: Keep out of reach of children. Use only in a well ventilated area.

Casting

Our proprietary epoxy resin blend is ideal for casting jewelry, including earrings, pendants, rings, figurines, coasters, paperweights, DIY crafts, and custom molds. (Max casting size is 6 fluid ounces.)

Clear Coating

Art ‘N Glow resin is ideal for clear coating and sealing artwork, photography, paintings, paper collages, tabletops, bartops, counters, and more. Our resin cures crystal clear and as hard as a rock.

Fluid Art Pours

Mix our resin with pearl powder, resin tint, and alcohol ink to create one-of-a-kind fluid pour creations. Choose from 19 pearl pigment colors. All pigments are designed to work flawlessly with our resin.

Glow in the Dark Crafts

Blend our resin with Art 'N Glow glow in the dark pigment powder to create artwork that glows for up to 12 hours. We have 14 glow in the dark colors to choose from. Just charge with a UV light or the sun for a bright and long lasting glow!

• ✔ CRYSTAL CLEAR - Our Table Top Epoxy cures ultra clear making it perfect for table tops, bar tops, and countertops
• ✔ UV RESISTANT - Unlike many other epoxies, our epoxy resist yellowing caused from exposure to Ultra Violet Light Sources
• ✔ SELF LEVELING - Bar Top Epoxy self levels on application including corners, over bar rails and edges.
• ✔ HIGH GLOSS DURABLE FINISH - Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating
• ✔ 100% SOLIDS - Low Odor, ZERO VOC, consistent thickness, quick curing 1 to 1 mixture, 1 Gallon Kit

User questions & answers

Question:	Is it required to use a ventilator mask when using? and is this Resin food safe
Answer:	It is not required. However, you should use the epoxy in a well-ventilated area. It is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe. Each mixture/application would have to be assessed individually.
Question:	Id like to dye the epoxy different shades of green but I need it to stay transparent. Any suggestions
Answer:	There are various dyes and pigments to choose from. It really depends on how deep of a green you'd like while maintaining transparency. I would suggest trying multiple on a sample area so that you can gauge the color/transparency of the pigment/dye.
Question:	I have stained my bar top with an oil based stain. Can I use the epoxy over it or do I need to do some other prep
Answer:	You can use a water-based clear coat on top of the stain. After the clear coat has cured, use a 320grit sand paper to take the shine off. You can then apply the table top epoxy.
Question:	What’s the diameter of the cap? I want to buy pumps to fit, thanks
Answer:	The cap is 1.5 inches in diameter. Let us know if you have any other questions. Thanks!
Question:	How much does it discover ( sq feet
Answer:	Covers apx 750 sq inches.
Question:	I have a heavy marble table, the bottom mount under the top broke off, would it be strong enough for this application
Answer:	I got a job to put together a 13 foot marble altar, weighing several tons. I used this stuff to glue the hundreds of marble pieces together, after testing the bond strength, and it's still standing today. Granted there isn't any real strain on the joints in most places, but the bond is stronger than the marble itself. This is good stuff.
Question:	Can it fix on the cracks of corina counter top
Answer:	Hi Chris,It is great for crack repair as long as the crack is wide enough to be able to get the material down in it. A good rule of thumb is that crack needs to be wide enough to get a credit card wedged between. Good luck!
Question:	What type of colorant can be used with the product - is the resin considered a polyester resin. The product details are not very precise
Answer:	For coloring the resin I have used Custom 4 Coloring Kit for Epoxy Gluing or Repairing of Granite,...Sold by: GRANITE POLISHING PADSYou can order this item from amazon. The dye is very efficient and seems to work very well with the resin. Yes this epoxy appears to be some sort of polyester. As soon as u add the hardener the epoxy hardens fast but it gives you enough time work with. My results were very good although didn't polished it yet. Good luck

Product features

Crystal Clear Finish

High gloss, ultra clear finish makes our epoxy perfect for Table Tops, Bars Tops, Coffee Tables, Live Edge Tables and other coating applications. However, epoxy is not flexible. River tables must be supported to prevent flexing which could cause cracking.

*Do not pour over oil-based paint or stain.

Common Question: My project is painted or stained with an oil based product, what can I do?

A: You can apply a water based clear coat (must be water based). Once the water based clear coat has fully cured, you can apply the epoxy. If the clear coat leaves a shine/gloss you may want to scuff the surface to ensure the epoxy properly sticks. We recommend using 320 grit sandpaper. If you do sand, be sure to thoroughly clean the surface prior to applying the epoxy. We recommend using Isopropyl Alcohol 99% (be sure it is 99%) to clean.

UV Resistant

Although most epoxies will yellow over time, some resist yellowing caused by exposure to ultraviolet light better than others. Our epoxy contains UV Inhibitors which helps to resist yellowing. *Although our epoxy is UV resistant, which resists yellowing, we do not recommend leaving finished projects in direct sunlight or for permanent outdoor applications.

Common Question: Can I use this on a table that will be outside on a covered patio?

A: It is possible to leave the epoxy outdoors if not exposed to direct UV exposure. If the epoxy is exposed to direct UV, the epoxy can yellow. This will be more noticeable on white or lightly colored substrates/surface. We recommend exercising caution when considering use over white or light-colored surfaces.

It is also important to consider temperature fluctuations. Materials such as metal and glass can expand and contract at a different rate from the epoxy. This could cause glass to crack or the epoxy to peel away from a metal surface.

Food Safe Epoxy

Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually. This is not a high heat epoxy. We recommend using hot pads/coasters for coffee mugs, hot pans, pots, etc.

Common Question: Can I use this epoxy to make tumblers?

A: We have many customers using our epoxy for custom tumbler designs. However, this epoxy self levels. Therefore, many customers utilize a "cuptisserie" which is a rotating device that keeps the tumbler rotating while the epoxy is curing so that the finish is even.

Again, keep in mind: Properly cured epoxy is possible to be food safe. However, because the customer is mixing/pouring we cannot say this is food safe approved. Each mixture/application would have to be assessed individually.

Colored Epoxy Compatible

How To Color Epoxy: Our epoxy mixes well with mica pigment powders for colored epoxy applications. River tables, resin art canvas and more may require tinted epoxy. Epoxy is not meant to be mixed with or poured over oil-based products. Do not pour over oil-based paint or stain.

Common Question: What type of pigment or dye should I use with this epoxy.

A: We do not recommend mixing epoxy with paint or anything oil based. Many of our customers use mica pigment powders. Mica pigment powders come in many different colors, glitters, metallics, and even glow in the dark.

Q: How Much Pigment Powder Should I Use?

A: This is a subjective answer as it depends on the certain hue and level of opacity desired. We suggest starting with a very small amount and adding more until the desired color is achieved. We also always suggest testing a small scrap piece of material to understand how the epoxy will flow and how the color will cure in the epoxy.

Easy To Use 1:1 By Volume Mixture

Self Leveling, Impact Resistant, Superior Air Release

Popular uses include wooden bar tops, river tables, embedding pictures or embedding solid objects into a desired surface. Because our epoxy cures crystal clear, multiple layers will not compromise color/transparency. Each poured layer should not exceed 1/4" at a time. Working Time: 25 (+/-5 Minutes)

How Much Epoxy Do I Need?

Our rule of thumb regarding coverage is 12 sqft per mixed gallon at 1/8 inch.

Family Owned Business, Made In USA

VARIETY OF APPLICATIONS

For Uses On

• Wood
• Concrete
• Bottle Caps
• Artwork
• Canvas

Common Question: Can I apply epoxy over paper products like photographs, cigar wrappers, playing cards, and more?

A: If you wish to apply paper decals, bottle caps, or other objects under the Table Top surface, those objects need to be bonded to the surface with craft glue or a thin layer of Table Top Epoxy. Paper products must be sealed prior to applying any epoxy as the epoxy could soak in and ruin the paper product.

You can use something like mod podge or a similar water based clear coat/glue. Allow this seal coat to dry thoroughly before applying epoxy. For figurines, shells, and other large more three-dimensional items, using a thin epoxy seal coat is best, prior to encapsulating.

HIGH GLOSS FINISH

Epoxy resin leaves durable, blemish resistant, water resistant and impact resistant coating.

The beauty of epoxy is the ability to recoat a surface after years of use to regain a smooth, high gloss finish.

Common Question: I see that your epoxy requires thin pours of no more than 1/4" per application. How long do I need to wait between pouring a new layer?

You can apply the second coat when the prior coat is tacky to the touch (usually 4-6 hours depending on temperature). If you wait longer than 12 hours between coats, we recommend a light sanding. You can use 320 grit to scuff the surface. This will help the next coat to properly stick. If you do sand, be sure to thoroughly clean the surface prior to pouring the flood coat. We recommend using Isopropyl Alcohol 99% (make sure it is 99%) to clean.

TOP QUALITY

Incredible Solutions Table Top Epoxy is proudly MADE IN THE USA.

Competent Knowledge Base helps plan and troubleshoot even the most complicated projects.

Common Question: Does your epoxy require specific temperature environment to mix/pour epoxy?

A: The ideal working temperature is around 77°F. Best results can be obtained at temperatures between 75°F and 85°F, in a clean, dry, dust-free environment. Avoid working in high humidity. It is important you keep your project in this environment throughout the entire curing process. We recommend using this product on a leveled and flat work surface so that it can flow and self-level properly.

• Designed for Table Tops, Bars, Wood finishes, See-Through Encapsulations, Art work, and other applications
• Self Leveling and High Gloss U.V. Resistant Formula
• Produces a Tough, High Gloss, Water Resistant Coating
• Eliminates Craters, Crawling and Fish Eyes
• Blush Resistant

User questions & answers

Question:	Replacing the deck on a dock with 4' x 8' marine plywood. Plan to coat the plywood with epoxy to seal it. Will this product work outside
Answer:	That would depend on if you are pouring over anything or a straight pour, a river table or pure epoxy, so you need to give more information
Question:	Should the resin be a lot thicker than the hardener right out of the jug? Mine was. It woudn't pour out - I had to squeeze it out
Answer:	Depends how much of that table space will be wood and how much will be epoxy. I just used about 4.5 gallons for a table with similar dimensions and a 7" average river. Couldve used a little more too.
Question:	For protecting concrete counters, what kind of sealer can be used? trying to avoid water-based b/c I don't want it "wet" and avoid sealing with epoxy
Answer:	No
Question:	What should the room temperature be to apply to a bar top? Do you need a sealer coat over stained wood
Answer:	What size did you get? Because i thought i was getting 16oz bottles, however part a & b were 8 oz each. Seems like epoxy advertises the total oz combined between the 2 instead of individual and that got me. You can always go to your order history and contact the seller.

Product features

Beautiful and Versatile, Crystal Clear Finish...Every Single Time!

High Gloss & Durable

High performance and Crystal clear! Produces a tough, high gloss, water and scratch resistant coating.

Versatile

Can be used for a wide variety of applications, art, and home projects.

FDA Compliant

FDA Compliant formula for artistic items used around food, such as trays, tumblers, and glassware.

UV Resistant

Specifically designed to resist UV rays so you can feel comfortable displaying your art anywhere!

Product description

Easy-to-use self-mixing dispenser and precision applicator. High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more. Final bond is high strength and weather-, water- and solvent-resistant. Sand able and paintable.

From the Manufacturer

For over 50 years, Loctite has provided customers with advanced adhesive and sealing solutions. Loctite Epoxy 5 Minute Instant Mix is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond, which starts to set in 5 minutes and reaches handling strength in 1 hour. The static mix nozzle delivers a uniform mixture of resin and hardener every time. It can be used as an adhesive for a wide range of materials or as versatile filler for gap bonding, surface repairs and laminating. Loctite Epoxy 5 Minute Instant Mix does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled. Our uncompromising level of quality and innovation is achieved through a strong commitment to research and development. This commitment to innovation, quality and reliability has truly earned Loctite the reputation of delivering "Trusted Performance. Proven Results".

• Easy-to-use self-mixing dispenser and precision applicator
• High-strength formula bonds wood, metal, tile, ceramic, glass, plastic and more
• Waterproof, sand able and paintable
• It can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.
• Loctite Epoxy Instant Mix 5 Minute does not shrink and is resistant to water and most common solvents.
• The static mix nozzle delivers a uniform mixture of resin and hardener every time.
• It can be tinted with earth pigments, cement or sand for color matching and can be sanded and drilled.
• Recommended for bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone.

User questions & answers

Question:	Can this be used to repair scratches in quartz countertops
Answer:	I wouldn't use it to repair quartz since it is a porous solid when it cures.
Question:	does the Marine Epoxy come in another color other than white. And are any of your other products suited for constant outdoor use
Answer:	Thank you for your question about Loctite Epoxy Five Minute Instant Mix. This product is not the Marine variation, however that is currently only available in white through us. For any other questions about product specifications feel free to reach us at 800-453-0349. Thanks and have a great day!
Question:	Can this be used multiple times or only once before it dries out or otherwise becomes unusable
Answer:	Two times with the supplied nozels. You can use it more than two times but must mix epoxy by hand and apply with tooth pick or other device
Question:	where can i get extra mixing tips
Answer:	I’ve had good success just squirting it onto some cardboard, mixing with a popsicle stick, then applying to surface.

Product features

5 Minute Instant Mix Epoxy

• Perfect for any application - the Dr Crafty epoxy resin kit is ideal for wood finishes, crystal clear coating plus many more applications. It is strong, transparent and fully UV resistant ensuring long lasting results.
• Everything you need included - our art resin kit comes with bonus items so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 x large sticks for mixing and 2 x plastic spreader to ensure an even finish.
• Easy to use - straightforward and no confusion, just mix one part resin to one part hardener and then you'll have 45 minutes of work time at room temperature to produce your finest work!
• Great quality - unlike cheap alternatives this epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing as well as being non-toxic.
• Read the manual carefully - Please read the instruction manual provided with the DR.CRAFTY epoxy resin kit closely before use. If you have any questions or issues regarding the kit please do not hesitate to send the seller a message through Amazon and we will respond within 24 hours.

User questions & answers

Question:	Would mixing by hand (paint stick) in small cups be okay? 2 cups max
Answer:	I’m knew to this as well but according to the instructions you mix at a 1:1 ratio and I do so on a bigger cup then distribute to smaller cups. This is much easier to do since curing time varies on several factors.
Question:	Can i buy just the hardener? i was accidentally sent two 1-gallon bottles of dr. crafty resin instead of one bottle each of resin and hardner
Answer:	Hi there, unfortunately we do not currently sell the hardener separately at this time.
Question:	How hot does the resin get while curing
Answer:	In a 6" x 6" x 1/2" thick covered mold I recorded a max temp of 165 degree Fahrenheit for the resin.
Question:	do I have to weigh it on scale or just use the measuring cup for the same volume
Answer:	I see answers that you can use 1:1 for both weight and volume. When measuring 1:1 for weight, I end up with a lot of left over resin. Is this correct? Seems if it were truly a 1:1 either way, the bottles would be empty at the same time.

Product features

Perfect for any application

the Dr Crafty epoxy resin kit is ideal for wood finishes, crystal clear coating plus many more applications. It is strong, transparent and fully UV resistant ensuring long lasting results.

Everything you need included

our art resin kit comes with BONUS items so you can get started right away: 2 x 16.9 ounce measuring cups with spouts, 2 large sticks for mixing and 2 plastic spreader to ensure an even finish.

Great quality

unlike cheap alternatives this epoxy resin will remain crystal clear all the time, our resin is fully resistant to yellowing as well as being non-toxic

Product description

CRYSTAL CLEAR EPOXY is a SUPER GLOSS , clear polymer that is used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give a rich super gloss look and protect from scratching and air humidity. New improved UV resistance formula. 1 Gallon kit covers around 25 sq.f. (layer thickness 1.5-2 mm) Surfaces coated with this product are very durable, water resistant and easy to care for. Crystal Clear Epoxy contains two parts: resin 1/2 gallon and hardener 1/2 gallon, which are mixed together at a 1 to 1 ratio by volume. Work time is 30-35 min. Detailed instructions are included with each kit.

• Super Gloss Durable Finish
• Water resistant
• Self leveling
• Odorless
• Detailed instruction included with each kit

User questions & answers

Question:	Do they make in matte or satin, or is there any additive to make a matte/satin finish
Answer:	Typically,it is thicker than the hardener. Not sure if it is twice as thick but there is a noticeable difference.
Question:	Can it be poured cast in very thin fine layer as For jewelry
Answer:	Hi there! Even though our epoxy is non-toxic, these have not yet been tested as food-contact safe. So we highly recommend that you avoid contact with food/water for consumption. However, if you plan on epoxying the outer surface of your tumbler then this will work fine.
Question:	can I sand and buff the epoxy once it cures and still have a crystal clear appearance? If so what grit sand paper and with what should I buff it
Answer:	Normaly the previous coats melts with the new ones, the surface should be very clean and dry. You can add a thin layer first, a second one 24 hrs. later and to avoid bubbles use the gas torch. I would'nt recomend sanding, porosity will create a lot of bubbles. In the Envirotex's web page there is a chart which shows amounts of Pour On per sq ft.
Question:	how much do I need to cover a kitchen counter that one is 10 feet long the other is six foot long both are 25 inches
Answer:	No it stays clear