9 best deck paint for boats

• UNIQUE NON-SKID DECK PAINT: Durable, textured, low-glare high-traction surface for secure footing, with a comfortable rubberized texture that's less abrasive than traditional silica additives: One part polyurethane non-skid deck paint creates a durable, high-traction surface for comfortable, secure footing and a finish that's less abrasive than traditional silica additives
• LONG-LASTING POLYURETHANE FINISH: UV resistant coating won't fade or peel; easy to clean - scrubbing won't wear away the finish; affordable way to bring your old boat flooring back to life
• NON-SLIP PAINT WITH MANY APPLICATIONS: Boat decks, docks, cabin soles, hatches, stairs, steps, gunwales, swim platforms, concrete, patios, floors, and anywhere else you need sure footing
• 1-PART PAINT IS EASY TO APPLY by brush or roller on fiberglass, wood, properly primed aluminum, metals, and previously painted surfaces; add a second coat for greater traction. Coverage: 250-300 sq. ft. per gallon
• COMES IN PAINT COLORS TO MATCH TOPSIDES OR EXISTING NON SKID PATTERNS: Sand Beige, Kingston Gray, Light Gray, White (tintable with TotalBoat Wet Edge Topside Paint). Available in Quarts and Gallons

User questions & answers

Question:	can i mix my own color? and do have mixing colors i can buy
Answer:	the bottle says, KEEPS CONVERTIBLE TOPS LOOKING LIKE NEW, QUICK AND EASY TO USE FORMULA, PENETRATES AND CLEANS EVEN THE TOUGHEST STAINS. IT ALSO SAYS TO SHAKE WELL FOR BEST RESULTS, USE ON A COOL SURFACE IN THE SHADE. ON CLOTH TOPS TEST FOR COLOR FASTNESS IN AN INCONSPICUOUS AREA. I would say that maybe the answer the person gave on do not use is maybe because his top had never been cleaned good, it is a 2010 he said, but i don't know. so like any product of this sort you would have to do a test. it is a cleaner. and if a top hasn't been taken care of then it probably would cause color fastness. but do read the directions and follow them if you should buy this product.
Question:	would you use it on top of the (factory) painted sheet metal inside a vehicle? if so, what's the recommended preparation
Answer:	I was able to clean small stains off a black soft top for a solstice. It also cleaned oil stains off of a tan top for a fiat 500.
Question:	Can i use this with total boat wet edge topside paint
Answer:	I have a light brown canvass top on a 2008 mini convert and it works perfectly. I see others where owners have taken similar cloth tops through the car wash and they have very noticeable streaks.
Question:	Will this work on a normal shower stall plastic bottom
Answer:	No. I wet it down and then use the cleaner, scrub thoroughly, rinse off until the water washes clean, let dry, then spray on the protectorant

Product features

TotalBoat TotalTread Non-Skid Deck Paint is the Easy, Economical Way to Get an Attractive, High-Traction, Low-Glare Surface that Actually Feels Good Underfoot.

The safety of all passengers & crew is always a top priority because boat decks are awash in all kinds of things that make them slippery and unsafe—rain, dew, spray, liberal use of the washdown hose, & spilled drinks, for example. Decks also bear the brunt of heavy foot traffic & punishing UV rays. TotalBoat TotalTread Non-Skid Paint makes it easy to prevent daily wear & tear from ruining your deck—and slip & fall injuries from ruining your day. Its 1-component polyurethane formula is mixed with unique Propyltex wax texturing agents that form a better bond to the paint than other brands. Just stir thoroughly, then apply with a brush or roller. TotalTread's rubbery texture provides maximum traction, & isn't abrasive like the silica-based additives in most non-skid paints. It feels good on bare feet and won't scrape the skin off of kneeling knees. A little hard scrubbing with a stiff bristle brush cleans the surface—without particles becoming dislodged or dark specs showing through.

More coats equals more grip.

TotalTread is ideal for boat decks, docks, ramps, steps, gangways, cabin soles, cabin tops, anchor locker covers, and much more. It comes in colors that match our TotalBoat Wet Edge Topside Paint & its high-solids formula will cover completely in one coat. However, to get the best combination of grip and durability, we recommend applying two coats. For a more aggressive grip, apply a third coat.

TotalBoat Customers Get Great Results!

• "Two coats (what they recommended) went on evenly and it came out really good. Lots of traction but not painful underfoot." - M. Mitchell, via Amazon Reviews
• "Excellent non-skid paint. Easy to work, flows well, dries quickly. I'll use two coats, but one covers nicely. Excellent adherence to raw fiberglass. Not glossy. Best new paint that I have tried in years." - T Hill, via Amazon Reviews

Clean, prepare, & mask.

FIBERGLASS

• Remove surface contaminants. Wipe with a clean rag wetted with TotalBoat Dewaxer & Surface Prep.
• Abrade lightly with a Scotch-Brite pad.
• Wipe with TotalBoat Special Brushing Thinner 100.
• Mask areas adjacent to application site.
• Priming is not necessary.

WOOD

• Mask areas next to application site.
• Sand smooth down to 220-grit sandpaper.
• Wipe clean with TotalBoat Special Brushing Thinner 100.
• Prime with TotalBoat Topside Primer.
• Sand lightly with 220-grit.
• Wipe with Special Brushing Thinner 100.

PREVIOUSLY PAINTED SURFACES

• Remove all previous coatings in poor condition.
• Wipe clean with TotalBoat Special Brushing Thinner 100.
• Mask areas next to application site.
• Apply TotalBoat Topside Primer.
• Sand lightly with 220-grit.
• Wipe clean with Special Brushing Thinner 100.

METALS

• Prime metals with TotalBoat 2-Part Epoxy Primer, TotalBoat TotalProtect, or TotalBoat Aluminum Boat Barrier Coat, depending on metal & application.
• Sand cured primer with 220-grit.
• Wipe with TotalBoat Dewaxer & Surface Prep.

Stir well, apply first coat.

MIXING

The non-skid particles in TotalTread have a low density so they remain suspended in the paint, without floating to the top, or sinking to the bottom, like other non-skid paints. Mixing is easy and quick, just use the supplied mixing sticks and stir thoroughly. During application, you don’t need to keep stirring in order to keep the particles suspended in the paint.

APPLICATION

1. Apply TotalTread only when dew, rain, and temperature conditions will not affect proper application or drying.
2. TotalTread can be thinned 5-10% with TotalBoat Special Brushing Thinner 100, if needed.

TIP: Thin, even coats will yield the best results.

TINTING TOTALTREAD

To get a desired color, without ruining its high-traction finish properties, TotalBoat TotalTread can be tinted, up to 10% by volume, with TotalBoat Wet Edge Topside Paint.

TIP: It's very important not to add too much tint, or you'll ruin the non-skid properties of TotalTread.

Sand lightly, apply final coat.

• After the first coat dries (8 hrs. @ 90°F; 12 hrs. @ 70°F;16 hrs. @ 50°F), sand the surface lightly with 220-grit sandpaper. TIP: When sanding between coats, some of the grit will get sanded down, but do not sand completely smooth.
• Wipe the surface clean with TotalBoat Special Brushing Thinner 100, before applying the final coat.

Enjoy the beautiful finish!

TotalTread color shown: Sand Beige

It all started simply enough. As boaters, we wanted better stuff for our own boats.

Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. So we took everything we knew from 35 years of customer feedback, combined that with our own boating knowledge, and after a few years of rigorous R&D, TotalBoat was born. Launched, rather. By boaters, for boaters.

Need help? Our TotalBoat Tech Team is a bunch of boat owners who really know their stuff. So whether you're trying to figure out what to buy or what's the best solution for your particular project, they have years of hands-on training and experience—and a passion to help you succeed.

Product description

Our premium marine grade telescopic handle extender pole is made from durable yet lightweight aluminum making your job more comfortable and easier, the locking pole arm extends from 3.5 feet - 6 feet and can be adjusted to various lengths to accommodate your boat, car, RV or paint roller needs. Our extender aluminum telescoping pole features a universal acme thread that can be used with our Better Boat Deck Brushes, other standard brush heads, sponges, squeegees or as a paint roller rod. This versatile handle is sure to become a work-horse in your arsenal of cleaning supples, keeping your boat and automobiles looking fantastic. We proudly stand behind the quality of all our products! We are a family owned American business committed to making premium quality products.

• LONG REACH TELESCOPING POLE EXTENDS FROM 3.5 - 6 FEET: Our premium extension pole features a custom locking mechanism that locks the pole at different lengths in order to accommodate all your boat, auto and home cleaning needs. This versatile extendable pole can be used with various extension pole attachments such as a deck brush or mop head to clean a deck, hull and more. At the shortest length it can be used as a broom stick or broom handle, or extend it to clean hard to reach areas.
• VERSATILE UNIVERSAL 3/4" ACME THREAD TIP FITS DIFFERENT HEADS: Our telescoping handle extension rod features a standard universal threaded pole tip that can be used with different head attachments including a brush head, sponge, squeegee, paint roller or broom. This extension handle works to clean the interior and exterior of boats, as a deck stain applicator and as a car wash pole or truck washing brush to wash your car, truck or RV.
• STRONG YET LIGHTWEIGHT ALUMINUM MAKES IT EASY TO USE: Our marine grade extending pole is made from aluminum, making it extra sturdy and durable while being comfortable to use. Our premium expandable pole features a comfort grip handle with dense foam padding and ergonomic design. This versatile pole can be used as an extension pole for cleaning or with a paint roller as an extension pole for painting. We stand behind the quality of our boat cleaning products!
• EXCEPTIONAL QUALITY: Better Boat offers a comprehensive line of premium quality boat care products. Developed by boaters for boaters, our marine-grade products are made to strict, tested, trade-secret standards. We offer all the tools needed to make caring for your boat easier so you can spend less time cleaning and more time on the water.

User questions & answers

Question:	Where is it made
Answer:	While our cleaning solutions are made here in the US, our extension pole is made in China. Hope that helps and thank you for your interest in Better Boat.
Question:	What is the diameter of the actual pole
Answer:	The diameter of the outer metal pole is 1 1/4" Hope that helps and thank you so much for your interest in Better Boat.
Question:	What type of material is the threaded head made of? I'm concerned with anything that will rust
Answer:	The threaded head is stainless so you don't have to worry about rusting. Hope that helps and thank you so much for your interest in Better Boat.
Question:	Is there a boat hook attachment that can be added
Answer:	We are actually working on it and should have it for you in a couple of weeks. Thanks so much for your interest in Better Boat.

Product description

Durabak is a one-part, moisture cured, polyurethane protective coating with unlimited applications. This product is tough, totally flexible, slip resistant and waterproof. Durabak is an outstanding product that provides a non-slip coating and professional grade finish to do-it-yourself projects. You can choose the textured version with recycled rubber tire granules or the smooth version to achieve an exceptional result. Durabak will bond to concrete, wood, fiberglass, metal and coated surfaces. Durabak will even bond to itself making it easily repairable if necessary. Just open the can, stir and apply to the prepared surface. Durabak is available in 16 standard colors and is available in a smooth or textured finish. We can also manufacture custom colors for larger orders. Durabak will not flake, chip, or peel even when subjected to impact, vibration or bending and known for its durability and multi-uses. Thousands of professionals stand by Durabak as their choice of coating for almost any job. Durabak has been approved for use on US Navy nuclear aircraft carriers. It is currently on the USS Theodore Roosevelt, USS Dwight D. Eisenhower, USS Harry S. Truman and the USS George Washington.

• Durabak 18 is a one-part, moisture cured, polyurethane protective coating with unlimited applications. This version of Durabak is recommended for outdoor use or for applications in direct sunlight.
• Durabak 18 textured version contains recycled rubber tire granules and is tough, totally flexible, slip resistant and waterproof.
• Durabak 18 is an outstanding product that provides a non-slip coating and professional grade finish to do-it-yourself projects.
• Durabak 18 textured version can be applied by brush, spray or our special Stipple Roller and will bond to concrete, wood, fiberglass, metal and coated surfaces.
• Durabak 18 will even bond to itself making it easily repairable if necessary. Just open the can, stir and apply to the prepared surface.

User questions & answers

Question:	Can I brush this on or dose it have to be sprayed
Answer:	blend a TotalTread color with a TotalBoat Wet Edge color. jamestowndistributors
Question:	How do you prep the surface before using product
Answer:	Call Jamestown Distributors, you can look up the number online. They have very friendly customer help people. Ask to talk with one of their paint people. They will give you the correct information.
Question:	Are there temperature restrictions when applying Duraback
Answer:	It sounds like you are wanting to mix the wet edge with the total tread to make you own color? It is OK to do this.
Question:	Can i paint a whole truck with this stuff
Answer:	Good Afternoon, yes, this product should work for that application. It is recommended to use a primer first. Thank you.
Question:	I am building a flat bed on a pickup out of wood and looking for a way to seal the wood before I put it together,has anyone used it on raw wood
Answer:	As long as you apply this product directly to an applicator or microfiber towel and not to the surface, this product will be safe to use.
Question:	I have a covered patio on my house, that needs waterproofing, would this product be a good match
Answer:	32 oz. Vic
Question:	Could this be applied onto deckover painted wood
Answer:	Yes, just make sure you spray the product onto a towel first and then wipe it onto the surface. Then come back with a clean/dry towel and wipe off any excess.
Question:	Is this the flexible version? the ut 100 f
Answer:	Unsure sorry.

Product description

KiwiGrip is a revolutionary, durable, non-skid coating that spreads quickly and easily with an included proprietary roller, offering a beautiful, high traction surface. By varying the application technique, the texture can be adjusted from a rolled "pleasure boat" texture to an industrial aggressive "work boat" texture. As a homogeneous material, KiwiGrip does not suffer from the problems encountered with products filled with sand, Walnut shells, beads, rubber Fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out leaving an unsafe deck that's hard to clean and even harder to re-coat. KiwiGrip is available in five beautiful stock colors, but is also easily tinted to custom pastel colors.

• Proprietary roller used to add texture to KiwiGrip non-skid deck System products
• Roller size is 9 inch (228mm)
• For use with KiwiGrip products
• Country of Origin:Mexico

User questions & answers

Question:	Can you achieve different texture with tmjust this one roller or do they offer different kinds of rollers
Answer:	I don't think so but it is one tough coating. Must say that I am real pleased.

Product description

Slick or slippery surfaces can easily become hazardous — especially if they are in high-traffic areas. To avoid falls, trips, and slips, apply Skid Grip textured paint. It is safe for bare feet and shoes but can help provide extra traction to slippery areas. This 100% acrylic coating is extremely durable, making it great for interior or exterior use. Apply this paint to pool decks, courts, playgrounds, porches, ramps, boat decks, stairs, garage floors, driveways, and more to promote safety for people and pets of all ages. The highly adhesive paint can stick to almost any surface, including wood, concrete, stone, metal, fiberglass, and more. Plus, it is industrial strength and can withstand all types of weather along with everyday wear and tear. We also offer several color options so you can create a no-slip surface that blends in with or stands out from existing decor. Choose from Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate. These colors are designed to last for years to come, thanks to Skid Grip's long-lasting and abrasion-resistant finish. Skid Grip exceeds ADA standards for anti-slip surfaces, so you can feel confident in your purchase. Our anti-abrasion coating is easy to apply. To use, first thoroughly clean the surface to remove dust, debris, or other particles. Then, apply Skid Grip using a brush or roller. Allow ample time to dry before touching or applying another coat. We recommend 1–2 coats for optimal coverage. Order this 1-gallon can of Skid Grip today!

• ANTI-SLIP PAINT: Skid Grip is an acrylic textured paint that can turn any surface into a skid-resistant one. The durable coating is ideal for indoor or outdoor use to create a high-grip finish.
• INCREASE SAFETY: This slip-resistant coating is ideal for making high-traffic areas safer. Add it to a patio, pool deck, basketball court, driveway, step, ramp, or playground to prevent falls.
• ADHERES TO MOST SURFACES: Whether for home or commercial use, liquid Skid Grip can be used on almost any surface. It adheres to cement, wood, stone, asphalt, and more.
• EASY APPLICATION: To create a non-skid surface, first clean the surface thoroughly to remove any debris. Then use a brush or roller to apply Skid Grip and create texture. Allow ample time to dry.
• MULTIPLE COLORS AVAILABLE: Don't let a textured surface become an eyesore. We offer Skid Grip in fade-resistant colors, including Camel, Cobalt, Crimson, Emerald, Jet, Plain, and Slate.

User questions & answers

Question:	Never got it
Answer:	Great stuff
Question:	Do the decorative epoxy flakes work well with this item
Answer:	The guy complaining its loaded with grit . How did you think it was made to be slip resistant ? There are alot of foljs that must growed up near power lines .
Question:	what color is closed to brown
Answer:	Hi Thanks for your question. Camel is a light medium brown. Thanks
Question:	Can this be used indoors for concrete floors
Answer:	Yes, but unless you don't plan on sweeping or mopping the floor I wouldn't use it on its own. It feels like rough concrete when applied. As a base coat that is covered in regular paint for concrete it works great. Once covered you end up with a textured, skid resistant floor that is sweep-able and mop-able.

Product features

100% Acrylic Anti-Slip Coating

Skid Grip provides a slip resistant surface that is specifically designed to beautify existing concrete, asphalt, and other surfaces. The 100% acrylic formulation provides increased performance and reduces oxidation. This prevents peeling, flaking and the erosion of the concrete surface below, keeping the integrity of the anti-slip surface intact for years to come.

Cost Effective

Skid Grip Anti-Slip Paint is a cost effective way to enhance the landscape of any project. This durable, 100% acrylic anti-slip finish has superior adhesion to prevent flaking and peeling on both concrete and asphalt. Create beautiful walkways, patios, pool decks, sport courts, ramps and driveways that are attractive, practical and economical.

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parks and Playgrounds
• Tennis Courts

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Pool Areas
• Patios

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Walkways
• Sidewalks

Ideal For Use On

Skid-Grip Anti-Slip Paint can be top coated with Traffic and Zone Marking White Paint and assorted ready mixed colors for high contrast lines and stencils.

• Parking Lots
• Driveways
• Cement Stairs

Seven Amazing Colors to Choose From

Product description

KiwiGrip is a revolutionary, durable, non-skid coating that spreads quickly and easily with an included proprietary roller, offering a beautiful, high traction surface. By varying the application technique, the texture can be adjusted from a rolled "pleasure boat" texture to an industrial aggressive "work boat" texture. As a homogeneous material, KiwiGrip does not suffer from the problems encountered with products filled with sand, walnut shells, beads, rubber fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out leaving an unsafe deck that's hard to clean and even harder to re-coat. KiwiGrip is available in five beautiful stock colors, but is also easily tinted to custom pastel colors.

• No fillers, sand, rubber flecks, or shells. Texture is applied via the KiwiGrip roller.
• One part system. Applies in a single coat on most surfaces.
• Lowers the finished cost of non-skid application, saving money.
• Environmentally Friendly. Water-based acrylic.
• Available in five beautiful stock colors.

User questions & answers

Question:	i have a 12 foot or so aluminum boat. I want to use this product on the inside of the boat. will 1 can do the job
Answer:	Yes, you definitely can. You can do both the Textured version or the Smooth version. You may want to do the Textured on the bottom half and the Smooth on the top half. Many customers have coated the full vehicle with Durabak.
Question:	Will it stick to aluminum
Answer:	I used it on a boat floor and so far its working for me, I dont think I would us it on truck bed unless they make a truck bed liner
Question:	Do you have to prime on gelcoat
Answer:	I would suspect it would work very well. I used it on the upper deck of my 50' trawler (area about 15. x 30') and it worked very well. The main attraction for me was that the product is able to accommodate a considerable amount of expansion and contraction without cracking.
Question:	what kind of primer is needed for this product to paint aluminum
Answer:	Best to use with the Tuff Coat 2 part primer. I tried some areas without the primer and it did not hold as well as the primered area. I would ask Tuff Coat, it might depend on the type of paint on the wood. I rolled it on my boat deck and could not have asked for a better tougher top coat.

Product features

KiwiGrip Non-Skid Coating

KiwiGrip is a revolutionary, durable, non-skid coating that spreads quickly and easily with an included proprietary roller, offering a beautiful, high traction surface. By varying the application technique, the texture can be adjusted from a rolled 'pleasure boat' texture to an industrial aggressive 'workboat' texture.

Coverage.

1-liter of KiwiGrip will cover about 20 square feet. 4-liters of KiwiGrip will cover about 80 square feet.

Easy To Maintain

As a homogeneous material, KiwiGrip does not suffer from the problems encountered with products filled with sand, walnut shells, beads, rubber fleck, or other fillers. Coatings with fillers tend to wear through, and the fillers fall out leaving an unsafe deck that's hard to clean and even harder to re-coat.

Colors Available

KiwiGrip is available in five beautiful stock colors, white, cream, blue, gray and black. Our standard colors have been selected for being low glare and as cool as possible underfoot in direct sunlight. Loaded with a UV stabilizer for consistent color. Note that the RAL codes are approximate.

White - RAL 9016

Cream - RAL 1015

Blue - RAL 250 92 05

Grey - RAL 7047

Black - RAL 9011

Adjustable Texture

By varying the application technique, the texture can be adjusted from a rolled 'pleasure boat' texture to an industrial aggressive 'workboat' texture.

Minimal Prep

Simply clean the surface making sure it is free of wax and grease. Sand the surface, then apply KiwiGrip. Note: On some surfaces, a primer will be required.

Many Applications

It can be used on wood, fiberglass, epoxy, concrete or metal.

Easily Tinted

KiwiGrip is also easily tinted to custom pastel colors. We use the same water-based tints that most paint retailers use. Technically, there is no limit to the color as long as it is a light color since we start from a white base. Dark colors are not possible since the tint is quite runny and too much tint will destroy the non-skid properties.

Product description

TotalBoat Wet Edge Topside Marine Boat Paint is an easy-to-use, 1-component, polyurethane marine grade paint that provides a beautiful, brilliant, resilient, high-gloss finish on hulls, cabin tops, consoles and other topside surfaces above the waterline. Use on fiberglass, wood, metals and previously painted surfaces in good condition. Its UV resistant formula provides excellent weather resistance so the finish retains its superior color quality and gloss. Once cured, the extremely durable finish will not fade, lift, crack, or peel. The high-solids content in Wet Edge makes it look better and last longer. It's also why you need to apply thin coats - 2 to 3 coats are all you need for long-lasting beauty and shine. Wet Edge gives you the high gloss and durability of a 2-part polyurethane without all the hard work. It's very easy to apply, has excellent flow out, and dries perfectly smooth. For best results, prime bare wood or previously painted surfaces with TotalBoat Premium Topside Primer. Use TotalBoat Dewaxer & Surface Prep as a solvent wipe to remove grease, oil and other contaminants. Wet Edge may be thinned with TotalBoat Special Brushing Thinner 100 (brush/roll application) or xylene (spray application). Application temperature is 50-90 degrees F. Wet Edge is also compatible with non-skid additives and flattening agents for 1-component polyurethane paint. Compare Wet Edge marine paint for fiberglass boats to Interlux Brightside Polyurethane, Pettit Easypoxy and Pettit EZPoxy, Rustoleum Marine Topside Paint, Duralux Marine Paint and Epifanes Monourethane. Wet Edge offers superior durability, color retention, gloss retention, and weather resistance, which also makes it an ideal canoe paint, kayak paint, camper paint, rv exterior paint, or golf cart paint. For an excellent aluminum boat paint, use TotalBoat Aluminum Boat Topside Paint. All TotalBoat products are developed for boaters by boaters, to provide great value and great results. 100% made in the USA.

• DURABLE, HIGH-GLOSS MARINE GRADE PAINT provides a beautiful, scratch resistant, chemical resistant, uv resistant finish with maximum color and gloss retention
• EASY TO APPLY: 1-Part formula provides professional results with just a brush and roller (roll & tip method); can also be applied by spraying; for use above the waterline
• SELF-LEVELING, ABRASION RESISTANT POLYURETHANE FINISH is easy to clean & resists staining; will not fade, crack, or peel; easy to touch up; ideal for power boat hulls, sailboat hulls, campers, RV exteriors, doors and trim
• VERSATILE TOPSIDE PAINT: Wet Edge looks great on fiberglass, wood, metals, and previously painted surfaces; not for continuous submersion on boat bottoms that remain in the water longer than 72 hours
• CHOOSE FROM 21 POPULAR HIGH GLOSS COLORS in Pints, Quarts & Gallons. Coverage: 350-400 sq. ft./gal. (White, Black & Gray also available in flat finish). Primer: TotalBoat Topside Primer or TotalProtect (metals)

User questions & answers

Question:	What kind of sprayer do you use on this? A commercial airless or a auto type paint gun
Answer:	I used a soft sponge roller and paint brush for detail if needed.
Question:	How can i tint this paint ? , oyster is to biege ,white is to white
Answer:	You can use a different color of Wet Edge to tint the paint, that is all that is recommended.
Question:	Good day could i use regular thinner or reducer in this paint
Answer:	I used lacquer thinner and it worked fine.
Question:	Is the blue glo glow in the dark
Answer:	No. Adding blue to white makes the white appear more white but not washed out. Nice color.

Product features

TotalBoat Wet Edge Topside Paint gives you the beauty, high gloss, and durability of a 2-part polyurethane—without all the hard work.

TotalBoat Wet Edge 1-part, marine-grade polyurethane topside paint makes it easy to get a hard, high-gloss finish with superior resistance to UV damage, abrasion, and stains. It's also flexible enough to withstand all the movement (flexing, expansion, contraction) hulls & other topside surfaces typically undergo in ever-changing weather conditions, making it very resilient & durable. There's a color here to please just about everyone: (Top to bottom) Sand Beige, Kingston Gray, Flag Blue, Bristol Beige, Fighting Lady Yellow, Blu-Glo White, Sea Foam, Black, Sea Green, White, Fire Red, Largo Blue, Yellow, Hatteras Off-White, and Classic Whaler Blue. It also comes in Off-White, Oyster White, and Aqua Mist. If you want a custom color, you can blend different Wet Edge colors to create your own. Wet Edge is preferred for its high-gloss finish, but a few colors are also available in a flat finish. Available in Pints, Quarts, and Gallons. Pints are perfect for painting boot stripes.

TotalBoat Wet Edge can make your home ship shape, too!

TotalBoat marine-grade paints & varnishes can also provide durable, elegant finishes for your home. Our high-gloss topside paint is tougher than the stuff made to paint houses because it has to withstand relentless abuse from the wind, sun, rain, pollution & salt boats are exposed to in harsh marine environments. This head-turning finish looks great on front doors, trim, outdoor furniture & more.

Wet Edge gives you the edge in a range of temperatures.

Maintaining a "wet edge" is just paint talk for applying paint starting in the unpainted area and moving back into the just-painted area in order to avoid lap marks. TotalBoat Wet Edge lets you keep a wet edge in temperatures ranging from 50 to 90°F.

Brushing

For better flow out when brushing, thin Wet Edge with either TotalBoat Special Brushing Thinner 100 or mineral spirits (5-10% by volume). To ensure a proper cure, apply 2-3 thin coats rather than thick coats.

Color shown: TotalBoat Wet Edge Classic Whaler Blue.

Rolling & Tipping

For best results, the person holding the roller "rolls" vertically, applying an even coat of paint. The person with the brush "tips" horizontally. We recommend a natural bristle brush or a badger hair brush for tipping, instead of a foam brush, which will drag the paint away, rather than level it.

Color shown: TotalBoat Wet Edge Fighting Lady Yellow.

Spraying

When spraying, thin Wet Edge with xylene (thinning percentage varies by the sprayer and conditions, typically 15-20%). Tip: Don't apply paint too thickly, or the finish will not dry properly.

Color shown: TotalBoat Wet Edge Sea Foam.

Robert Hadden's sailboat

• Wet Edge Fire Red
• Wet Edge White

"I have been restoring a sailboat for the past two years, and this spring/summer I finally finished it. This picture is the boat hull finished with TotalBoat Wet Edge paint (both white and red), and TotalBoat Gleam varnish on the deck."

Kent Lewis' 1980 AMF Sunfish, "Viper"

• Wet Edge Kingston Gray

"We used TotalBoat Epoxy for fiberglass repairs, then TotalBoat Primer. Faired a few spots with TotalFair, sanded with 100 grit. Used Wet Edge Kingston Gray to paint the Sunfish VIPER. Rolled and tipped the second coat of Wet Edge, thinned 5 percent because temp was 80F plus."

Richard Honan's 8' Nutshell Pram, "Summer Wind"

• Wet Edge Off-White
• Wet Edge Bristol Beige
• Wet Edge Flag Blue

"TotalBoat Wet Edge Bristol Beige (interior), Off White (bottom and lower strakes), Flag Blue (gunnel). Summer Wind would have been painted with 100% TotalBoat Wet Edge, but there was no burgundy, which I used for the seats and rub rail. TotalBoat Marine Wood Finish was used on the mast, boom, and gaff. The tiller was finished with TotalBoat Lust Varnish."

Mary Feeny's front door

• Wet Edge Yellow

"When my yellow front door on a rental property I own needed a fresh coat of paint, I turned to Wet Edge for a few reasons. I wanted a super bright yellow and your color was a perfect match. Also, because it's a rental property, I needed a very durable finish that would really last, so I didn't have to repaint soon and bother the tenants again. Using a marine finish on my exterior front door was the perfect solution and years later it's still bright yellow and looks as great as it did the day I painted the door!"

It all started simply enough. As boaters, we wanted better stuff for our own boats.

Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. So we took everything we knew from 35 years of customer feedback, combined that with our own boating knowledge, and after a few years of rigorous R&D, TotalBoat was born. Launched, rather. By boaters, for boaters.

Need help? The members of our TotalBoat Tech Team are boat owners who really know their stuff. So whether you're trying to figure out what to buy or the best solution for your particular project, they have years of hands-on training, experience, and a passion to help you succeed.

• ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint; for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition
• COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat; apply a second coat only if a higher build is needed; to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer
• EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip; wear proper personal protection; work in a well-ventilated area; boat primer is chromate-free and lead-free
• DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F; marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint
• AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100; spray application - thin with xylene; do not apply Topside Primer thicker than recommended or it may not cure properly

User questions & answers

Question:	will it stick to pressure treated plywood
Answer:	Durabak can certainly be brushed, roller or sprayed. Usually one would only use a brush in corners or tight areas. It is most common to use a roller to apply Durabak. When using a roller for the textured version you should only use Durabak's Stipple Roller Sleeve.
Question:	can this be used over epoxy resins
Answer:	Surface absolutely must be dry and free of oil or grease. A rough surface is better for adhesion. I rolled this product over my 30 year old boat floor fiberglass surface after I removed the old carpet. Only prep I did was scrubbed old surface with a typical hand brush and vacuumed up all loose material. Mix the paint very very well with a wooden stir stick...do NOT shake it. Poured the product onto the floor and used thin nap paint roller to spread it out evenly. Dried by end of day. Do not paint it over silicon as it will not adhere to that.
Question:	Can the paint be used on concrete
Answer:	It is best to apply Durabak between 32 degrees and less than 90 degrees. Applying it in temps of 90 degrees and above will make it hard to apply as the Durabak may set up too quickly and it will therefore be hard to work with. Durabak needs heat and humidity to cure so applications at the low end of the temperature range would take longer to cure. Optimal temps would be between 70-85 degrees.

Product features

A Premium Marine Undercoat That Lets You Finish Priming Faster!

TotalBoat Topside Primer features a high-solids formula that seals the surface in just 1 thin coat. It dries faster and sands easier than other 1-part primers, letting you start painting sooner.

TotalBoat Topside Primer Makes Topside Paint Look Better and Last Longer.

No one likes sitting around waiting for paint to dry, especially if they're only at the priming stage. TotalBoat Topside Primer is a premium marine undercoat preferred for extremely fast dry times and high-solids, 1-coat coverage that sands easily to a smooth, fair surface ready for one-part topside paints—including TotalBoat Wet Edge, TotalTread non-skid deck paint, TotalBilge epoxy bilge paint & TotalGold paint for decorative detail work. Apply to properly prepared wood, gelcoat, fiberglass & previously painted surfaces in good condition. Use anywhere above the waterline. It comes in white & gray. We recommend using white under lighter colors, and gray under darker colors. It's important to note that our Topside Primer is "high-solids" not "high-build". The difference is that a high-solids coating has great coverage & sealing properties in 1 coat, whereas a high-build primer allows increased application thickness to hide surface imperfections.

Tip: Keep in mind, it's a primer, not a filler—we recommend applying one thin coat.

Because this is a high-solids primer, it's designed to be applied thinly to seal the surface, not in thick coats to fill surface imperfections. A thick coat will not dry properly, and will gum up your sanding discs. Applying a thin coat of this fast-drying primer allows it to dry properly and makes it easy to sand, once cured. It also allows the cured primer to flex without lifting.

TotalBoat Customers Get Great Results

• "Goes on easily, covers well and dries fast. Odor disappears fast also. When it's dry you can see any imperfections in the surface which are easy to fix by light sanding." - John R. via Amazon Reviews
• "It went on a little thick so I thinned it a little. After drying the next day, I sanded it to smooth out a few imperfections. Sanded easily & smoothed out nicely." - M. Mitchell via Amazon Reviews

Easy to apply by brush, roller, or sprayer.

Surface prep is the key to smooth, long-lasting results. A properly prepared surface is clean, solid, and dry. For best results, do not apply primer immediately after rain, during foggy weather, or when the temperature is below 50°F.

Use a 1/8" solvent-safe foam roller or a firm polyester brush, for best results. Avoid lap marks by not priming in direct sunlight and by coating sections of the surface either down or across to natural breaks, maintaining a wet edge.

Our premium Topside Primer is easy to apply to properly prepared wood, fiberglass, gelcoat, or previously painted surfaces in good condition.

Thinning: When brushing or rolling, thin TotalBoat Topside Primer with TotalBoat Special Brushing Thinner 100. If spraying, thin with xylene, up to 15-20%.

Covers in a single coat and dries fast!

In most cases, just 1 thin coat of this unique primer's high-solids formula provides the needed adhesive bond for topside paint finishes, even if full hide is not achieved. This makes the job easier because it means you'll do far less sanding in order to get a fair surface ready for finish paint.

During application, if your wet edge begins to dry, or you see that you missed a spot and the primer's already setting up, let it dry completely before touching up the area.

Tip: Do not apply primer too thickly or you'll lose flexible adhesion characteristics that make TotalBoat Topside Primer one of the marine industry's leading one-part undercoats. Dry Film Thickness (also known as DFT) should be 1-2 mils per coat.

Dry Time To Sand or Overcoat: 1 hour @ 90°F, 2 hours @ 70°F, 4 hours @ 50°F.

Can be applied below the waterline, but is not a barrier coat.

TotalBoat Topside Primer can be used to prime surfaces below the waterline, but it's important to note that it's not an epoxy barrier coat. To prevent osmotic blistering or corrosion, use TotalBoat TotalProtect Epoxy Barrier Coat and Primer or TotalBoat Aluminum Boat Barrier Coat prior to applying paint.

It all started simply enough. As boaters, we wanted better stuff for our own boats.

Even our favorite products, the ones we'd come to rely on, had room for improvement. It'd be nice if they could hold up longer, cure faster, coat better, apply easier, and—since we all know boat ownership creates a mini maelstrom in your pocket—cost less. So we took everything we knew from 35 years of customer feedback, combined that with our own boating knowledge, and after a few years of rigorous R&D, TotalBoat was born. Launched, rather. By boaters, for boaters.

Need help? The members of our TotalBoat Tech Team are boat owners who really know their stuff. So whether you're trying to figure out what to buy or the best solution for your particular project, they have years of hands-on training, experience, and a passion to help you succeed.

Product description

TotalBoat TotalBilge premium bilge paint is ideal for those greasy, grimy, humid places on your boat exposed to the harshest conditions and the hardest wear, especially the bilge. This epoxy-based, high-performance alkyd resin marine paint is easy to apply by brushing, rolling, or spraying. It provides a long-lasting, rock-hard, glossy finish that's resistant to all the nasty things that can plague not only bilges, but engine rooms, bulkheads, chain lockers, lazarettes, and V-berth stowage areas. We're talking diesel fuel, engine oil, acids, antifreeze, grease, grime, heat, humidity, mildew, and solvents. TotalBilge's hard-wearing, abrasion-resistant finish provides excellent protection against the damage and staining that can occur when chemicals, oil and sludge get absorbed into wood or fiberglass. A clean, freshly painted bilge is not just for looks - there's also a practical side. A clean bilge lets you see problems such as leaking fuel and oil, and fix them before they get worse. Besides making it easier to find problems, our white bilge paint also makes it easier to find stuff that accidentally gets dropped into the bilge, such as tools and car keys. Our TotalBilge gray bilge paint is the lightest shade of gray available. Both colors offer superior opacity for excellent coverage and ability to hide previous stains on fiberglass, primed aluminum, primed steel, and wooden boats. The durable, high-gloss finish is also easy to keep clean - just wipe away the grease and grime with a cleaning and degreasing product such as TotalBoat Eco Solvent. TotalBilge is available in Quart and Gallon sizes, in your choice of Gray or White. Compare to other bilge coat paint products such as Interlux Bilgekote, Pettit EZ Bilge Paint, and Epifanes Bilge Paint. All TotalBoat products are designed for boaters, by boaters, to provide great value and great results. 100% made in the USA.

• TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat bilges, engine rooms, lazarettes, lockers, stowage areas and bulkheads
• CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly damage, or find items accidentally dropped into the bilge; both colors offer excellent coverage and hide
• EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal; prime prepared metals with TotalBoat TotalProtect; for fiberglass prime with TotalProtect if desired; for wood use TotalBoat Topside Primer if desired
• EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, stain, or mildew.
• CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal; THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100; Spray Application - Xylene

User questions & answers

Question:	Would this paint work well when applied to bare wood
Answer:	Good Morning, Yes KiwiGrip will stick to Aluminum. However, it must be primed first in order to get proper adhesion as well as to seal and protect the metal as KiwiGrip is not a sealed paint. http://www.pyiinc.com/KiwiGrip/applyingkiwigrip.html
Question:	Ok, maybe a silly question... Could this be used in a bathtub
Answer:	No, unless the deck is heavily grazed.
Question:	Can i apply this over cured totalboat penetrating epoxy , without primer ? Thanks
Answer:	I would not put this directly on a aluminum, prep the aluminum, then etch it with a light citrus acid spray,?wash off and then dry with acetone and the prime with an epoxy primerlike sherwin williams mil-spec 235 then kiwi grip over that
Question:	Is it non toxic? I wanted to use it to paint a bird bath
Answer:	The rollers are all the same and they produce about the same pattern.