5 best stud finder target

Product description

If you have problems with the product you received, please contact us at the first time, we will provide the most satisfactory solution.

It is a handheld wall detector with high sensitivity for home decoration, which could help you locate hidden metal pipes, live wire, stud and metal frames accurately when you want to dig a hole to hang a picture or install shelves.



FEATURE:



★Ergonomic Design: handheld and anti-slip body for comfortable and firm grip.



★Smart Beep Function: reminds you of the stud's location to find the stud quickly.



★LCD with Backlight Display: LCD digital display to show the indication clearly.



★3 Detecting Modes: integrated wall scan mode, metal scan mode and AC wire scan mode.



★With battery level indication and auto shutdown function.



SPECIFICATIONS:



Material: ABS



Maximum Detection Depth:



Magnetic metal: 120mm



Non-magnetic Metal: 80mm



Live wire: 50mm



Wood: 38mm



Operating Temperature: -10 ~ 50°C



Storage Temperature: -20 ~ 70°C



Power Supply: 1 * 9V 6LR61 Battery[Not Included]



Item Size: Approx. 21.8 * 9.1 * 3.3cm / 8.6 * 3.6 * 1.3in



Item Weight: Approx. 261g / 9.2oz



Package Size: Approx. 25.6 * 17 * 6cm / 10.1 * 6.7 * 2.4in



Package Weight: Approx. 417g / 14.7oz



PACKAGE INCLUDES:



1 * Wall Detector



1 * Hand Strap



1 * User Manual

• ★ACCURATE, FAST LOCATION: Our stud detector wall scanner adopt best Upgraded intelligent micro-sensor chip which can precisely and quickly find edges and center of metal, studs, joists, pipes, live AC wire behind walls, floors and ceilings.
• ★4 SCANNING MODES: The Stud Finder provides four scanning modes in total for detection. Depending on the tasks you have, you can switch to the desired mode. Current-scan:2 inch/50mm depth; Magnetic metal: 4.72inch/120mm depth; Non-magnetic Metal: 3.15/80mm; Wood-scan:0.7 inch/19mm depth.
• ★ACCURATE DETECTOR TECHNOLOGY: Displaying the Desired Stud Material as well as the precise position of the Stud, It features a large LCD display together with the big sound warning to detect the accurate location of the objects. The audible and visible cues reliably keep users informed when an object, such as metal, studs, AC live wiring gets found the device beeps and signal showing.
• ★SIMPLE TO USE, AUTO CALIBRATION: Bright, Easy-to-read LCD display and ergonomic anti-slip handle make detecting the target on the wall easily and conveniently. The wall detector can be automatically calibrated anywhere on the wall to successfully find the center of studs very efficiently.
• ★WIDE APPLICATION: This electronic stud finder quickly locates wood, metal and AC wires hidden in the walls, floors,lathe and ceilings of the house. It can work on different wall surfaces, such as lath, wallpaper wood flooring, acoustic ceiling,plaster wall,drywall etc.

Product description

TIPS: 1.Not to move the detector while calibrating. wait for the green lights up and start detecting. 2.During detecting, press and hold the ON/OFF button for the whole measurement. If not, the stud finder can’t work properly. 3.During detecting, please move the stud finder along the wall slowly. If you accidentally shake or lift the scanner during detecting, you should re-calibrate it. 4.The stud finder can work on different flat wall surfaces, such as drywall, floor, soundproof ceilings, paint walls, etc. But not suitable for textured walls.

• 【Quickly Locate Studs Before Drilling】Before installing TVs, cabinets, garage shelves, INKUEN stud finder can quickly locate pipes, steel bars, joists, metal studs, and AC wires behind the wall.
• 【Upgraded Muti-function Scanner】When detecting wood, Exact Scan Mode scans through drywall up to 0.75 inches (20mm) deep, Deep Scan Mode scans through up to 1.5 inches (38 mm) deep. Metal Scan Mode detects metal up to 1.5 inches (38 mm) deep. In all modes, AC wires can be always detected.
• 【Higher Accuracy & Power Saving】Compared with traditional detectors, INKUEN wall scanner has a powerful chipset that solves false alarms and the alarm range is expanded than actually. And the power saving is more than 20% lower than others.
• 【LCD Display & Indicator Light & Audible Alarm】When the target is detected, the signal bar on the LCD display will be full, the indicator light will turn red, and a continuous beep will tell you that the target is at this location.
• 【Satisfied Service】INKUEN offers a premium service with a 12-month warranty: the package includes 1 x stud finder, 1 x User Manual, 1 x 9V Battery. If encounter any problem, please contact us, we promise to help you solve the problem.

Product features

Why choose INKUEN Stud Finder Sensor Wall Scanner?

INKUEN stud wall scanner is very suitable for scanning of drywalls and finding joists, beams, AC wire, metal and studs in almost all types of walls. Such as, finding the beams in the ceiling; finding studs on the drywall; even finding metal/screws behind tiles.

Exact & Deep Detection

Exact Scan Mode is wood scan mode, can detects wood up to 0.79 inches (20mm) deep.

Deep Scan Mode is wood scan mode, can detects wood up to 1.5 inches (38mm) deep.

Metal Detection

"工" Mode is metal scan mode, can locates and detects metal up to 1.5 inches (38mm) deep and accurate detect the edge of metal.

Wire Detection

For Safety, wall scanner always detects and indicates the Live AC Wire, When live wire is detected, the "AC wire detection" icon will flash.

Note: AC wire can be detected in Exact Scan/Deep Scan/Metal Scan.

TIPS:

1.Not to move the detector while calibrating. wait for the green lights up and start detecting.

2.During detecting, press and hold the ON/OFF button for the whole measurement. If not, the stud finder can’t work properly.

3.During detecting, please move the stud finder along the wall slowly. If you accidentally shake or lift the scanner during detecting, you should re-calibrate it.

4.The stud finder can work on different flat wall surfaces, such as drywall, floor, soundproof ceilings, paint walls, etc. But not suitable for textured walls.

Step 1:Calibrate the tool before every scan

Choose mode, put the stud finder on the wall and press ON/OFF button to calibrate. Wait for 2-3 seconds. After the indicator light turns green, means that the calibration is complete.

Step 2: Hold the ON/OFF button all time to move

After calibrating, continue to hold the ON/OFF button and slowly move it along the wall. When the yellow indicator lights and the signal bar changes, it means there is something nearby.

Step 3: Find the location of the stud

When the signal bar is full, beep alarm is loudest, and the indicator light turns red, it means found the center of an object. Mark it and do not drill holes here.

Product description

Whether you are hanging pictures, putting up a new set of shelves or getting ready to start an addition, knowing where the studs are in a wall can be extremely handy! Tavool Stud Finder is the best choice for locating the studs/metal/ac wires preciously and quickly!



Tavool stud finder works by detecting density changes in a wall. Tavool wood stud finder adopts the UPGRADE SENSORS to get the greatest accuracy. Moreover, Tavool wall scanner can also help you avoid drilling or hammering into a water pipe or electrical wire



Before there were stud finders, people have 2 methods to find the stud : 1. Pounded a small nail into the wall until you hit a stud; 2. Use a small pivoting magnet. However, the first one damages the wall and the second magnet technique is slow.



The Electronic stud finders changed all that. Tavool Electronic stud finders gives you an amazingly accurate view into the wall and show you exactly where each stud is. Follows are the advantages of Tavool TH510 stud finder over the normal stud finders in the market:

1.Great accuracy/reliability/consistency

2.Identifies the width of stud as well as the location

3.Easy to read screen and the quick identifiers when you hit a stud

4.Increases the sensitivity to more than 2 inches

5.Upgrade model with 5 scanning modes to meet different needs



Tavool stud finder is perfect for normal scanning of drywalls and finding joists, beams, and studs in almost all types of stud walls, for example, finding studs on drywalls, plaster wall, finding the beams in the ceiling, floor, locating metal behind walls or other surfaces, even locating metal/screws behind tiles.



Give it a try and you will get your homework more easier!

• ➤GREAT ACCURACY AND CONSISTENCY - Tavool stud finder is professionally designed! Tavool stud finders uses the UPGRADE INTERNAL SENSORS. It senses a change in density in the space behind the wall and locates the stud center with GREAT ACCURACY. In additions. The shape of this wall scanner also shows the edges of the stud. The center of a stud is the most secure location when mounting anything heavy. The edges help you to recheck the locations. Take it home, makes your DIY homework easier!
• ➤5 SCANNING MODES UP TO 60MM DEPTH - Tavool stud locator has mufti-fuctions and can quickly and easily locates wood metal studs joists beams metal pipe rebar and live AC wire behind walls, floors, and ceilings. StudScan Mode scans through one layer of drywall up to 0.5 in.（12mm) and 1 in . (25mm) thick. DeepScan Mode scans through 2 layers of drywall up to 1.5 in. (38 mm) deep. Deep Stud Scan Mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard
• ➤WIRE WSRNNING INDICATOR, NO FEAR OF DRILLING INTO A LIVE WIRE - WireWarning Detection is up to 2 in.(51mm) deep. The added bonus is that the wire warning is ALWAYS ON while you are scanning in StudScan/DeepScan/MetalScan Modes, to alert you to the presence of live, unshielded electrical AC wires up to 2 in. (50 mm) deep, which helps you avoid drilling or hammering into a water pipe or electrical wire.Whether you are a professional, homeowner or a DIY enthusiast, you can find great use in it
• ➤EASY TO READLCD DISPLAY +SOULD WARNING HELPS FIND STUD CENTER AND STUD DEGES EASILY - Displaying the Desired Stud Center As Well As the Precise Position of the Stud - The Tavool digital stud detector features large LCD display together with the big sound warning to detect the accurate location of the objects. When find the material, the LCD display will indicate the direction and the intensity of beeping tells whether you are more close to the target. The fast detection saves users time greatly

Product description

The STANLEY FMHT77407 FatMax Stud Sensor 300 featuring a backlit LCD screen which clearly displays all of the sensor's readings, even in low light conditions. AC detection identifies live wires up to 2" deep, along with Wood & Metal stud detection through up to 1-1/2" deep surface material. Also features a deep metal scan what sense metal through up to 3" of material. Its One Pass center-find technology is able to locate the stud center. This unit also features auto-calibration. The marking channel improves accuracy of marking-out readings. New ergonomic design, and soft grips provide comfort and control of the tool. Uses 9v Battery, not included.

• Sequential LEDs and audible beeps indicate reading
• Marking channel with LED identifies target and makes marking surfaces easy and accurate
• Color: Yellow/BLACK
• Backlit LCD screen to display sensor's readying, even in low light conditions
• AC detection up to 2" deep; wood and metal detection up to 1-1/2" deep surface material
• Deep metal scan senses metal through up to 3" of material
• One Pass center-find technology to locate stud centers
• Auto-calibrating unit

User questions & answers

Question:	How useful is it
Answer:	hi, my dad wrote a comment on this last time and he isnt here right now, but he talked to me about it and he ended up throwing it away- thats how bad it was. it didnt work for him at all. hope this helps.
Question:	Does this device work AFTER it has been properly calibrated as per youtube video
Answer:	Nope. I've tried everything. I've even exchanged it for a new one. I have an old Stanley 77-110 basic model stud finder which still works and finds studs that the fay max can't locate. I thought I'd upgrade and had my son buy me the Fat Max for my birthday, big mistake. Google it and see all the other disappointed owners, this tool should be recalled.

Product description

The Zircon StudSensor i65 is a center finding electronic wall scanner. Using the patented CenterVision technology, the SS i65 easily locates the center and edges of wood and metal studs and joists behind walls, floors, and in ceilings with just one pass. The specialized SpotLite Pointing System and an audio tone indicate the location of the target. In StudScan mode, the SSi65 locates the center and edges of shallower wood or metal studs up to 3/4 of an inch (19 mm) deep. Switch over to DeepScan mode by quickly pressing the Power Button twice to double the scanning depth to 1.5 inches (38 mm). This stud sensor is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using both stud scan modes. To get started, install one brand new 9V alkaline battery (not included). Place the unit flat against the wall and press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete, continue to hold the Power Button and slowly slide the tool across the surface. The Signal Strength Bars will appear on the LCD screen when a stud is detected. As the stud finder detects the edge of a stud, “EDGE” will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the SpotLite Pointer as well as “CENTER” on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling into the center of the stud. With the Zircon StudSensor i65, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.

• The Zircon SS i65 electronic stud scanner detects the edges and center of wood and metal studs and alerts you of live AC wires helping you easily find studs and avoid hazards
• StudScan mode locates the edges of wood or metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep
• WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan and DeepScan modes
• Signal Strength Bars appear when a stud is detected and indicate when the sensor is approaching the target while the patented SpotLite Pointing System illuminates and the audio tone signal sounds when the stud center is located
• One fully charged 9V battery, not included, is required for the stud scanner to run at optimal performance

User questions & answers

Question:	Would it still recognize a stud even if he tells bad jokes about studfinders
Answer:	No, and not even if wastes space in Amazon question and answer sections posting really bad, dumb jokes...
Question:	Does it find nails in "metal stud mode"? zircon not clear on which models find center stud and nails
Answer:	I believe it does NOT find nails. Metal Stud mode refers to studs that a made from metal rather than wood.
Question:	Is there any chance this will see 2x6 rafter beams thru a particle board roof and asphalt shingles? Trying to locate them for mounting a dish mount
Answer:	There is a deep scan facility (double click the start button) but I'm not sure it will scan thru shingles-You are talking about several layers.I'd borrow one
Question:	How well does the center-finding feature work
Answer:	If you are fairly patient and give a couple of goes to verify your find it is pretty good. We use it on a daily basis for stud finding and centering.

Product features

Zircon StudSensor i65

Center Finding Stud Finder with Live AC WireWarning Detection.

Locate Wood and Metal Studs Safely and Efficiently

The Zircon StudSensor i65 is a handheld tool dedicated to quickly and easily find the edges and center of wood and metal studs and joists. This tool comes equipped with 2 scanning modes to allow its user to find studs up to 1.5 inches (38 mm) deep behind walls, floors and ceilings. StudScan mode allows the SS i65 to locate the center and edges of shallower wood or metal studs up to .75 of an inch (19 mm) deep. Switch over to DeepScan mode by quickly pressing the Power Button twice to double the scanning depth to 1.5 inches (38 mm).

The StudSensor i65 has additional features that automatically operate in both scanning modes. These features allow the user to be safe by avoiding electrical dangers as well as common calibration and scanning errors. While WireWarning Detection works to alert you of live, unshielded AC wiring while scanning in either mode ACT (Auto Correcting Technology) simultaneously operates to automatically correct common calibration errors, such as when scanning begins over a stud.

Before use, always be sure to install a brand new 9V battery. Zircon stud finders, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, brand-new, recently purchased alkaline batteries, with an extended expiration date are strongly recommended for use in these tools.

To begin, place the unit flat against the wall. Press the Power Button to calibrate the sensor. Once you hear a beep indicating calibration is complete. ALWAYS be sure to calibrate your stud finder before scanning.

Once the i65 is calibrated, continue to hold the Power Button and slowly slide the tool across the surface. As the stud finder detects the edge of a stud, 'Edge' will appear in the LCD screen. Continue to slide the tool along the wall until you hear an audio tone and see both the SpotLite Pointer as well as 'Center' on the LCD. These signs indicate the center of the stud has been found. Make sure to note whether the WireWarning Detection is alerting to live, unshielded AC wiring before drilling into the center of the stud.

Edge Finding

When using the i65 to scan for a stud, you will first be notified when the stud's edge is detected. All of the Middle Bars will be to one side and 'Edge' will appear on the LCD screen.

Be sure not to drill at the edge of the stud. Continue to scan the surface until the stud's center is detected.

Center Finding

When you hear an audio tone and see both the SpotLite Pointer as well as 'Center' on the LCD screen. These signs indicate the center of the stud has been found.

The center of the stud center is the stud's most secure location. It is critical to drill in the center when mounting heavy objects.

WireWarning Detection

WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan modes. It alerts you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 cm) deep. As you approach an area with live AC voltage, an 'AC' and lightning bolt icon will display in the top left corner of the LCD screen. If your scan directly starts over an area with live AC voltage, the WireWarning Icon will flash.

Note: Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Auto Correcting Technology (ACT)

Auto Correcting Technology (ACT) is a feature that enables the tool to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don’t have to, and will find that stud when you scan back over it.

This recalibration is usually transparent and no indication is made. If an arrow icon illuminates, the tool was calibrated near or over a stud and then moved away. The arrow indicates the direction of the missed stud.

Frequently Asked Questions

Question: Does the StudSensor i65 include a battery?

Answer: No. Zircon stud finders and detectors, particularly those with LCD screens, require and consume a great deal of current from batteries. For optimal performance, a brand-new, recently purchased 9V alkaline battery, with an extended expiration date is not included but is required to properly power the i65.

Question: I inserted a 9V battery, but the tool doesn’t turn on or is giving me strange readings. Is my tool broken?

Answer: Please be sure to use a fresh, brand new 9V alkaline battery with an extended expiration date. Batteries that may work in a smoke detector or remote control may not have adequate voltage to power the sensing technology in stud finders.

Question: Does the stud finder need to be calibrated?

Answer: Yes, as with all Zircon stud finders, the StudSensor i65 needs to calibrate to the surface before scanning. Calibrating the stud finder on an empty wall gives the device a chance to measure the wall thickness and material density, as well as register factors like humidity, temperature, and even the minor electric readings from your hand, which all have an impact on the readings from the wall. Calibrating is easy and just takes a second. To calibrate, simply place the unit flat against the surface to be scanned and press the Power Button. When powering the i65 on, all the icons on the screen and the SpotLite Pointer will briefly flash, the tool will beep, and the screen will then clear with the word “Stud” remaining. This indicates that calibration has occurred and the tool is ready to begin scanning. It is important not to move the tool or begin scanning until the calibration process has taken place for the most accurate results.

Question: What does 'Center Finding' mean?

Answer: Center Finding stud finders locate both the edges, AND the center, of wood and metal studs and joists in one step. 'Edge Finding' stud finders, on the other hand, only find the edges of studs, so you must determine the center. Finding the center of the stud to mount heavy objects is critical as the stud’s center is the most secure location of the stud.

Question: What is DeepScan mode?

Answer: Unlike StudScan mode which scans through one layer of drywall up to 0.75 inch thick (19 mm), DeepScan mode scans through 2 layers of drywall up to 1.5 inches (38 mm) deep. DeepScan mode is a higher sensitivity scanning mode that should be used when there are extra layers of wallboard or paneling. Extra layers in a wall can make it difficult to find studs in regular StudScan mode. To minimize false positives and/or finding other objects further behind the wall that may not be a stud, always start your scan in StudScan mode first.

Question: How do I scan in DeepScan mode?

Answer: With the unit still placed flat against the wall and turned on, quickly (within one second) release and re-press the Power Button. The Stud Scan mode indication will flash continuously, indicating that the tool has entered High Sensitivity (DeepScan) mode.

Question: How can I be certain the objects found behind my wall are studs in DeepScan mode?

Answer: DeepScan mode has increased sensitivity so you may have located something other than a stud. Studs are equally spaced to either side (12, 16, or 24 in. apart) and typically run from floor to ceiling. To better confirm that what you found is a stud, check for other studs equally spaced to either side or for the same stud at several heights directly above and below the first stud indication. A stud reading would also measure approximately 1.5 in. (38 mm) apart from each edge. Anything larger or smaller may not be a stud if not near a door or window.

Question: What is Auto Correcting Technology (ACT)?

Answer: Auto Correcting Technology (ACT) is a feature that enables the tool to automatically adjust for common calibration errors. It checks calibration 10 times per second and automatically recalibrates when/if needed. If scanning begins directly over a stud, the tool will transparently recalibrate, so you don’t have to, and will find that stud when you scan back over it. Some models will point an arrow in the direction of the stud when you move away. Models without ACT will give you an over-the-stud indication (flashing and beeping), alerting you to start your scan over a few inches to the left or right of your original scan.

Question: What is WireWarning?

Answer: WireWarning Detection is a feature that is always on while you are scanning in StudScan and DeepScan modes to alert you to the presence of live, unshielded, electrical AC wires up to 2 inches (50 mm) deep. As you approach an area with live AC voltage, an 'AC' and lightning bolt icon will display in the top left corner of the LCD screen. This is the WireWarning Detection Icon. If your scan directly starts over an area with live AC voltage, the 'AC' and lightning bolt icon will flash. Please turn off the electricity and use extreme caution in areas where live AC voltage is detected before nailing or drilling.

Question: Will this StudSensor i65 locate metal studs?

Answer: Yes, the SS i65 will locate metal studs. Since stud finders are looking for a change in density behind dry wall, not a particular material, they will react to metal as well as wooden studs. The i65 will locate wood and metal studs up to 0.75 inches (19 mm) deep while DeepScan mode locates targets up to 1.5 inches (38 mm) deep.

Question: Does the SS i65 work on wood paneling and other wood surfaces?

Answer: The i65 is optimized to scan through standard interior sheetrock / drywall (gypsum) construction. This tool will work on wood, plywood, wood paneling and particle board up to 1.5 inches (38 mm) thick.

Question: Will the i65 work on textured wall surfaces, acoustic ceilings, or wall paper?

Answer: Yes, the SS i65 will work on textured surfaces and dried wall paper as long as it does not contain any metallic foil or fibers. For highly textured walls or acoustic ceilings, place or tape a thin piece of cardboard onto the surface to be scanned. Recalibrate and scan over the cardboard in DeepScan mode.

Question: Can I use this stud finder to find studs behind carpet?

Answer: No. Zircon stud finders are designed for hollow interior walls. They will generally work well to find studs or joists through a plywood subfloor, after the carpeting/flooring has been removed.

Question: Will the SS i65 work on ceramic tile?

Answer: While the i65 may be able to read through ceramic tile, the many variable layers behind tiled surfaces make it one of the more difficult scanning environments. A Zircon MultiScanner with Metal Scan mode or a dedicated metal scanner from the Zircon MetalliScanner line is recommended to more accurately locate the nails or screw heads in deeper and/or difficult scanning areas.

Question: Does this StudSensor work on lath and plaster?

Answer: No, due to the inconsistent nature in which lath and plaster is constructed, the SSi65 cannot scan on lath and plaster walls. A Zircon MultiScanner with Metal Scan mode or a dedicated metal scanner from the Zircon MetalliScanner line can be used to easily locate the nails or screw heads that attach the wood lath to the studs.

Question: Can I use this stud finder to scan the outside wall of my house?

Answer: No. Zircon StudSensors are designed and recommended for interior use only.

Question: I'm planning on mounting my new flat screen TV to the wall. Will this stud finder help me?

Answer: Yes. The SS i65 is perfect for basic home or office jobs. The center-finding technology allows you to find and easily mark the center of the stud for secure mounting of TV's, and AV equipment, closet or garage shelving, heavy mirrors, light fixtures, coat racks and more.

Question: Is the tool waterproof?

Answer: No. The StudSensor i65 is splash and water resistant, but not waterproof.

Question: What is the difference between magnetic and electronic stud finders?

Answer: Magnetic stud finders are simply magnets that look for anything magnetic behind a wall. Typically, they are advertised to find screws or nails that hold the wall surface to the studs. However, nails often times are not placed in the center of studs making it difficult to determine where the stud’s center is or how wide the stud is.

Electronic stud finders, such as the i65, on the other hand, operate by detecting density changes behind a surface (like a wall) and will clearly and precisely indicate the edges and center of a stud. The center of a stud is the most secure location when mounting anything heavy. For applications like mapping out floor joists electronic stud finders have an advantage over magnets because they are not attracted to nails holding floor boards to a subfloor as well as nails in joists.

Question: Does the StudSensor i65 come with a warranty?

Answer: The StudSensor i65 comes with a limited one year warranty when fulfilled by and shipped from Amazon.

Question: Where can I get help using my StudSensor i65?

Answer: Zircon’s team of Tool Pro Experts provide superior customer service. We know the ins and outs about tools, construction, and the challenges that DIYers and professionals face. Rest assured, at Zircon you can reach live, knowledgeable, honest people who want to work with you. Call our toll free Customer Monday – Friday, 8 AM – 5 PM PST to speak with an expert today.

Zircon also provides users and merchants support via an online 24/7 interactive support center, step-by-step instructions, how-to videos, and online engagement. Visit Zircon’s website today.