13 best angle finder tools

Product description

The Klein Tools Digital Angle Gauge and Level can measure or set angles, check relative angles, or can be used as a digital level. The strong magnetic base attaches to ferromagnetic surfaces such as conduit. Along with dual measurement ranges of 0 to 90-Degree and 0 to 180-Degree, this tool has a high visibility reverse contrast display for easy viewing. Use as digital level, measure/set angles, check relative angles. High visibility reverse contrast display auto-rotates when turned. Strong magnetic base and v-grooves all around fit conduit contour. 0 to 180-Degree range is useful when accounting for kickback in pipe bending applications when bending to 90-Degree or more. Display auto-rotates when upside-down for easy viewing. Water and dust resistant with rating of IP42. Soft carrying case and two AAA batteries included. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• This Digital Angle Gauge and Level can measure or set angles, check relative angles, or can be used as a digital level
• High visibility reverse contrast display improves visibility in dimly lit work environments
• Strong magnetic base to attaches to conduit, pipes, saw blades, vents, ducts, and other ferromagnetic surfaces
• V-groove edges enable optimal alignment on conduits and pipes for bending and alignment
• 0 to 90-Degree and 0 to 180-Degree measurement ranges facilitate multiple and diverse applications

User questions & answers

Question:	Is the display easily readable outside in the sun
Answer:	Laser Level Line laser distance is related to the brightness of the environment. Generally, it can reach 10 meters in the daytime. If the light is dark, it can be more distant, even 25 meters.
Question:	Anyone get an error on start up
Answer:	There is NO wall attachment. Can only be used on a flat surface or tripod
Question:	Can you set this to 0 then find angle on table saw blade if table saw is out of level
Answer:	If you need to hang pictures evenly, this will help. Put it against the wall and turn it on. The built in level shows when your your line is level. Mark on the laser line where you want your pics to be and they will be even.
Question:	Is this accurate to 0.1 deg or
Answer:	I ordered this item because I also saw that picture, but there’s no way to attach to tripod : /

Product description

CRANACH Angle Finder brings you a more convenient work

1,Measure inside and outside angles

Measure the full range of both inside and outside angles within a 10th of a degree. Plus you can measure degree changes by manually “zeroing” the gauge on one angle then measuring the relative angle between two surfaces.

2,Ready to use

The Angle Finder comes with a protective pouch and one CR2032 battery along with a detailed user guide so you can start using the angle finder right out of the box.

Features

1.Great Locking Feature - The tight/loose knob works well and you can set it to the tightness that suits your use.

2.Low Power Consumption - Simple, precise and fast with working more than 2000 hours with only one piece of standard coin battery.

3.Durable Stainless Steel Body - Comes with perfect quality stainless steel, which ensures years of using.

4.Auto Off - Automatically shut down after 6 minutes of inactivity, saving energy.

5.Etched Measurement - Etched measurement provides lifetime clear reading.

• 【2 in 1 Digital Protractor】 This protractor angle finder features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in woodworking,construction,or drawing. Doubles as both a digital angle gauge and a protractor for measuring all your workshop angles.
• 【Measure 360 degrees】It even has a lock angle feature that helps maintain its accuracy, You can hold and keep the reading by pressing the HOLD function button, thereby saving you a lot of time and energy. Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles.With ease at +/- 0. 3 degree accuracy. This Digital protractor is equipped with a large LCD display for easy reading
• 【High Accuracy & Durable Material】The angle finder are made from stainless steel and laser etched, good rigidity, wear resistance, no deformation, durable stainless steel body can be used for a long time; never guess or eyeball the angle and length again with one convenient tool.It is a good choice for most projects and daily use.
• 【Light and durable】The angle finder is made from stainless steel, good rigidity, wear resistance, no deformation，Protractor comes with a large easy-to-read LCD display; never guess or eyeball the angle and length again with one convenient tool
• 【Battery Include】large capacity standby with automatic power-off function can work more than 2000 hours, saving power consumption and extending battery life.We provide a friendly manufacturer warranty for digital angle finder ruler so that you can buy with no confidence.Please contact us first if you have any question about mens beanie hats,we have 24-hour friendly customer service.

User questions & answers

Question:	Are the measurements printed and rub off
Answer:	THe top is concave or recessed from 1 inch off the edge across the middle - all the way around.
Question:	Are there measurements on both sides of the blade
Answer:	Length from hinge are to front is 16.6 inches. Width is 14.2 so it is width x length.
Question:	I can't figure out how to install the battery. I'm sure it goes in the joint, but I can't get it open. Anyone know
Answer:	No need to measure. Look at the rim of your toilet. Is it round at the front or does it come to a point? If it comes to a point it order Elongated if round order Round.
Question:	does the display flip and can you lock the angle physically
Answer:	Yes, the plastic bolts and nuts are included to attach this to your toilet. Just so you know, this is not a cheap piece of junk, this is a heavy duty seat. I was surprised by how excellent the quality of this seat is. Also, the hardware to attach it is good quality. I have had seats before that slide around after attaching. This one doesn't move at all due to its quality.

Product description

'Digital angle Finder, measurement range 0 Degrees to 360 degrees F, Accuracy +/-0.1 degrees, size 5 In., Number of level vials 0, number of plumb vials 0, number of magnets 0, power Source Lithium battery, LCD display, housing material plastic, Features lock and reverse angle modes, Jumbo LCD hinge mechanism provides full 360 degrees for measuring inside and outside and reverse angles, stainless steel construction, can be zeroed at any point in the swing, includes battery'

From the Manufacturer

This angle finder combines the ruggedness of analog rulers, both standard and metric, together with the digital technology needed for complete accuracy when measuring inside, outside and reverse angles. Precise measurements prevent waste by facilitating exact miter cuts. One button activates the reverse angle function, a hold button digitally saves the measurement and the large ergonomic locking know saves the angle manually. A big LCD readout makes measurements extremely easy to read while an innovative center CHECK notch enables exact ruler placement marking. This angle finder is ideal for framing, custom furniture building, stair and patio construction. flooring, tiling and many woodworking, carpentry and contractor needs in the shop and in the field.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• Digital stainless steel ruler and angle finder combo makes precise measurements for easy woodworking
• Digital protractor has lock and reverse angle functions that make all types of work easy and fast
• Hinge mechanism on the angle rule allows a full 360-degrees to measure inside outside and reverse angles
• Woodworking tool can be zeroed at any point in the swing; digital measuring stick has a length of 5 inches
• Protractor comes with a large easy-to-read LCD display; never guess or eye ball the angle and length again with one convenient tool

User questions & answers

Question:	Does it have a supplimental angle feature? Does it provide the complimentry angle
Answer:	No. You can actually feel little grooves where they are stamped very shallowly into the metal. I can’t imagine a scenario where you would have trouble with the measurements rubbing since they are stamped in.
Question:	Is this accurate enough to check the angle tools are cut at for a CNC mill
Answer:	Dear Customer， Yes，the measurements on both sides of the blade， one side is inch，other is centimeter
Question:	That helped out a lot. Now how does the on/o button work? Mine stays on after I press it. Actually, it will not go off
Answer:	If you place the gauge down with the joint to your right you will see a tiny button on the bottom of the display. Push it all the way in and the battery compartment will push out the top
Question:	I bought one, there are NO directions to install the battery and I can't figure out where it goes. I feel I will break it if I guess where it goes
Answer:	The display does not flip. The round blue part is a knob you can tighten that says “lock” and “open” depending on which direction you turn it. I wouldn’t say that it actually does lock. It just gets very very tight. That being said. It’s certainly tight enough to hold the angle under normal working conditions. It’s a good tool to have.

Product description

This highly accurate digital angle finder offers easy-to-read measurements via a large LCD display and has an 8" stainless steel blade and steel locking knob. It is ideal for measuring, storing and transferring inside and outside angles when building cabinetry, furniture and picture frames.



The General Tools 828 Digital Sliding T-Bevel Gauge & Digital Protractor in One offers pioneering technology that takes the guesswork out of angle duplication and eliminates the problems associated with manual measurement transfer.



DETAILS:

• Large LCD
• Four control buttons provide five functions: Power on/off, Reading hold, Read reverse angle, Flip display, Clear readout
• Auto power off
• Stainless steel blade
• Impact-resistant ABS handle
• Power source: "CR2032" Lithium-ion battery (included)

SPECIFICATIONS:

• Range: 0 to 360°
• Accuracy: ±0.3°
• Resolution: 0.05°
• Blade length: 8 in.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT.



Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.



For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction guaranteed.



WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• DURABLE - Commercial grade digital sliding T-bevel and digital protractor with impact resistant ABS handle
• HOLDS MEASUREMENTS- on digital angle finder for transfers between different surfaces or jobs
• TRANSITIONAL DISPLAY - Digital angle gauge has a reverse display button and flip display button with a locking knob for manual measurement transfer. Full LCD display with large digital angle readout.
• AUTOMATIC SHUT-OFF- feature that preserves battery life of the woodworking tool
• DUAL APPLICATION - T-bevel/digital protractor combo- is made with an ergonomic impact resistant handle with 8-inch stainless steel blade used for taking measurements

User questions & answers

Question:	Hi, can i make some reset? the read its not logical
Answer:	Yes
Question:	Can you tighten down the t-bevel to hold the angle
Answer:	Hi Jesse. I'd have to say yes. It does read down to 0.1 degrees (1/10th of a degree) I find it easy to zero out (long press on the 'On' button), and can even rev. the display, from 45 degrees, to 135 degrees. Which I often do. The battery lasts an extremely long time, though I do keep a few spares. Others have complained about the knob, moving the displayed reading while tightening it on the angle to be read. But as you may likely already know, the key here is to just simply keep the knob snug enough to stay, yet just loose enough to move to the angle you are trying to find on your block of aluminum, or whatever. I use it most often on bending polished ornamental metals, and do need to land on 1/2 degree increments from time to time. I Love this thing!
Question:	Can this be used to set accurate angles on table and miter saw blades
Answer:	theres a button opposite the battery I guess that aids in opening the battery holder. I just ooch it in enough to break the connection and make it turn off
Question:	What kinda battery goes in here? I am on a remote island and damn... i overlooked the 'yes' in the product info
Answer:	On the metric side of the ruler close to the read out display push the little tab and battery compartment should slide out on the opposite side , battery installation + side down , takes one CR 2032 battery.

Product features

Digital Sliding T-Bevel & Digital Protractor in One

The Digital Sliding T-Bevel Protractor can measure, set and transfer interior and exterior angles quickly and accurately. This tool is ideal for measuring, storing and transferring inside and outside angles when building cabinetry and furniture, creating picture frames, installing tiles and more.

Product description

A practical tool for measuring and duplicating difficult angles where a standard protractor or t-bevel cannot fit. The Protractor works on outside, inside and sloped angles from 0 to 165 degrees. The four-piece design adds additional versatility for measuring particularly difficult angles. Fine black graduations from 0 degree to 80 degrees in opposite directions. Brass lock nut.

From the Manufacturer

Transfer odd angles to your miter saw. Use this plastic protractor/angle finder to measure and mark the degrees of an angle on outside, inside and sloped angles. Fine black graduations from 0 to 90 degrees in opposite directions. Brass lock nut.

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools.

For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction.

WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

• INSIDE, OUTSIDE AND SLOPED ANGLES - this plastic protractor/angle finder measures inside, outside and slope angles.
• FOUR PIECE STURDY DESIGN – with brass lock nut
• TRANSFER ANGLES – with this plastic protractor, you can transfer odd angles to your miter saw
• FINE BLACK GRADUATIONS – from 0° to 180° in opposite directions
• VARIOUS PROJECTS – protractor/angle finder is ideal for construction jobs, cabinet-making and fine carpentry, where a standard protractor or t-bevel won't fit

User questions & answers

Question:	Does it work for trim
Answer:	Yes of course you can reset the reading, are you measuring angles? Because this is what the tool is used for either measuring an angle or setting and angle to cut. Hope this helps!
Question:	How do you use the "0,30,60" measurement markings above the reading area
Answer:	Yes. Just tighten the thumb screw and it holds the angle.
Question:	what is this material made of
Answer:	Yes...depending on the adjustments of your table/miter saw this should suffice to measure the angles.
Question:	does this tool work so that you can get an angle and then it will let you know the degree on saw
Answer:	The battery is CR2032 3V Lithium. When you open the unit the battery should have the number stamped on it.

Product features

General tools plastic protractor & angle finder, adjustable arms 0° to 180°

The #29 Plastic Protractor by General Tools is perfect for all your angle needs! Measure and mark inside, outside and sloped angles with ease. Never be on construction jobs, home improvement or woodworking projects without it!

Product description

3 PCS Contour Gauge Duplicator, Plastic Contour Gauge Profile Multifunctional Shaping Measure Ruler for Precise Measurement Tiling Laminate and Woodworking Project, with a Ruler (8 inch/20 cm)



Packing List: 1 x10 inch contour gauge (duplicator scale:10 inch/25cm)

2 x5 inch contour gauge (duplicator scale:4 inch/12cm)

1 x 8 inch/20cm ruler





MAIN FEATURES:

【100% SATISFACTION GUARANTEE】Buy without any risk, 30 days money back and 1-year free replacement for any quality reason



【PREMIUM HIGH QUALITY】These inch contour gauges are made of high quality raw material, strong plastic pins, easy to carry ; Anti-rust, durable and precise duplicator



【WIDE APPLICATION 】these contour gauges can be used to measure the shape of irregular objects，instant template for marking precise tile cuts



【EASY TO USE】 these contour gauges are very easy to use, just press the contour gauge's teeth against the object, fit the shape of the target object well, then track the shape you need while reading the object size

• 【PACKAGE CONTENT】1* 10 inch Red contour gauge(duplicator scale:10 inch/25cm), 2* 5 inch contour gauge duplicator( Blue+Green, duplicator scale:4 inch/12cm) and 1*8 inch/20cm ruler
• 【100% SATISFACTION GUARANTEE】 Buy without any risk, 30 days money back and 1-year free replacement for any quality reason
• 【PREMIUM HIGH QUALITY】These inch contour gauges are made of high quality raw material, strong plastic pins, easy to carry ; Anti-rust, durable and precise duplicator
• 【WIDE APPLICATION 】these contour gauges can be used to measure the shape of irregular objects，instant template for marking precise tile cuts
• 【EASY TO USE】 these contour gauges are very easy to use, just press the contour gauge's teeth against the object, fit the shape of the target object well, then track the shape you need while reading the object size

User questions & answers

Question:	Does it lock in position
Answer:	that's what it is designed to do, so yes if apply it to the angle you want to cut you just have to make the cut at that angle

• 【Digital Angle Finder Protractor】 with High Accuracy, Delicate Design and Modern Appearance, An Interior Designer Should Have One!
• 【High Accuracy】 Angle Range is 0-225°, Measuring precision: ±0.5°, Increase/Decrease Angle: 0.1°
• 【Data Hold】If You Want to Use Data Holding Function, You Need to Press the HOLD Button in Red rather than Twist the Knob. (The Knob is Just for Loosening and Tightening. It Can't Hold the Angle Firm Completely!)
• 【Backlit LCD Display】 Come with Backlit LED Display Which Makes it Possible to Read the Data Clearly, Even under a Low Light Circumstance
• 【With Horizontal and Vertical Bubble Level】 It Also Can Be Used Like a Spirit Level, Helping You to Check and Calibrate (NOTE: It is NOT a Digital Level. Will Not Display a Number on LCD, Just Only Assist You to Judge If It Is Horizontal / Vertical or Not)

User questions & answers

Question:	Is it waterproof or at least water resistant
Answer:	There is no lock
Question:	Does it also tell you the mitre cut to set
Answer:	It is garbage. get this https://www.amazon.com/gp/r.html?C=2B4D8XO3SVQMT&K=A3GFOUNMOV7F6&R=2719NGV4HVXLY&T=C&U=https%3A%2F%2Fwww.amazon.com%2FDoes-it-work-for-trim%2Fforum%2FFx3L86U45B9EPNF%2FTx1BOIULO888K57%2F1%3F_encoding%3DUTF8%26asin%3DB00004T7P5%26authToken%3Dcb841558-23d5-44d4-b80f-84720d85689a%26cdEmailView%3DA3GFOUNMOV7F6%26cdHideAnswers%3D1%26cdHideBuyBox%3D1%26cdShowAnswer%3D1%26joinConvo%3D1%26redirect%3Dtrue%26ref_%3Dpe_527950_33920250&A=T9N0Y71FQJADFDW3X3YNDLLMHOIA&H=OMVXFYCZQZAFITTBJY1BDAESTUSA&ref_=pe_527950_33920250. If you are at serious about getting angles for your trim.
Question:	Is the housing made of plastic or aluminum
Answer:	I'm not sure I understand the question, but as you can see on the device there are a number of areas to pull off the desired angle that you might need. There are instructions.
Question:	Can you get the percentage of tilt with this product
Answer:	cheap plastic. you get what you pay for.

Product features

Aluminum Digital Angle Finder Protractor 225° 16 inch Backlit LCD

Tips:

1. The Knob is not for locking. The Knob is just for loosening or tightening depending on user's habit and need. It Can't Hold the Angle Firm Completely, you still can move it.

2. If you want to "keep" the angle value, you need to use Data Holding Function. You have to press the HOLD Button in red rather than twist the knob to lock. (Check the related vedio in listing)

Package Included:

1 x Angle Finder Protractor

1 x Portable Bag

1 x 9V 6F22 Battery

1 x User Manual

Product description

The Bora MiteriX Provides the Most Precise Corner Measurements and Saves on Time and Material

One of the hardest parts of carpentry and DIY home improvement projects is getting an exact angle measure. With the Bora MiteriX duplicator gauge tool, it can be done easily with no math or having to read scales. It measures angles with absolute precision, then locks the angle and splits it in half for exact transfer to your Miter saw for perfect cuts every time.

When your miter cuts match up precisely, there are no unsightly gaps that are common when measuring freehand. It saves you time, and there is far less wasted material. The best part is that you can measure an existing angle on a piece of furniture, a corner in another room, or anywhere, then duplicate that exact angle to set your miter saw. For example, if you’re cutting crown molding, cornice molding, wood casing, baseboard, or trim for an existing piece, staircase, or wall, and the angle you need isn't a perfect-preset angle, this measuring tool will save you hours of frustration, and ensure you cut it right the first time.

This tool measuring guide also works for a table saw miter gauge setting. It’s built for long-lasting use. Bora makes the best, and this angle measuring tool is no exception – get yours today. The product collapsed measures 11” x 1.5” x 1.5”.

Add it to your shopping cart now!

• PRECISE ANGLE MEASURER: The Bora MiteriX is a tool specially designed to ensure that you measure the perfect angle for any corner, and it transfers that exact angle to your Miter saw for precision cuts. There’s no math or reading scales, and saves on time and wasted material.
• MEASURE, LOCK, THEN TRANSFER: Use the tool to measure the exact miter angle you need right on your piece, then lock it, and copy it to your Miter saw. The MiteriX divides the angle in half for a perfect joint.
• PROFILES ALL ANGLES: It works with measuring any angle in any room, and measures internal or external corners from 0-180 degrees, producing an accurate miter angle range of 0-90 degrees. Aluminum metal arms provide excellent rigidity and referencing.
• CARPENTER MUST-HAVE: The Bora MiteriX is simpler and more accurate than a standard protractor. It’s ideal to use for crown molding, casing, baseboard, trim, vinyl plank & laminate flooring, decks, and more. It is a valuable tool for finish carpentry and DIY home improvement projects.
• EASY STORAGE: The wings fold down, so it can be folded for convenient storage in your toolbox, workbench, pocket, or toolbelt. It measures 11” x 1.5” x 1.5 inches when collapsed and is a lightweight 0.6 lbs.

User questions & answers

Question:	Will this tool help with vaulted/cathedral ceiling that require 3 piece crown molding
Answer:	No
Question:	Any difference in this one & the red one
Answer:	It gives you the angle, in degree, to set the saw to
Question:	Where is this product made
Answer:	Aluminum
Question:	Will this work for the crown molding on the ceiling? I'm using crown molding that sits at a slight angle
Answer:	It only tells you the angles

Product features

Bora MiteriX Angle Duplicating Tool

The Bora MiteriX Duplicator Tool precisely measures angles, then locks the angle (and even splits in half) to transfer that exact angle to your miter saw. What makes this tool a necessity in your tool box is that you can now measure an existing angle on a piece of furniture, a corner in another room, etc, and then transfer that exact angle to your miter saw. This means your miter cuts will match perfectly, every time!

Easy Storage

The wings fold in so you can conveniently store the MiteriX in your tool box, work bench, or even your pocket or tool belt!

Perfect Angle Every Time

The Bora MiteriX Angle Duplicator tool is specifically designed to ensure that your miter cuts are at the perfect angle. Even works on outside angles. No guesswork!

Measure, Lock, and Transfer

Use the tool to measure the exact miter angle you need (right on your piece), then lock it, and transfer that exact angle to your Miter saw. The MiteriX divides the angle in half for a perfect miter. It couldn’t be easier!

Works With Any Angle

Measures internal or external angles from 0 - 180 degrees (miter angle from 0-90 degrees).

Angle Replication Made Easy

Remove aluminum measuring wing from one side and place the other side against the fence of your miter saw and turn your blade to match the angle of the plastic body of the tool. This will replicate the angle that you measured exactly!

Product description

• ✔ Newly Designed 10-inch contour gauge with lock allows you to duplicate any shape, great helper for Tradesmen, Craftsmen and DIYers.
• ✔ Wider Version No need for multiple sizes, this one size gets the job done. 5.1 inches in width, 2X deeper than similar shape duplicators. This profile gauge creates an instant template for curved and odd shaped profiles simply and easily.
• ✔Locking Feature Never worry about losing the contour of your shape/object again. Unlike the metal locks, this profile gauge lock is made with premium ABS plastic that allows you to lock your shape into place once it is set and won’t stick or corrode like the others.
• ✔ Multi Angle Ruler The contour gauge also comes with a free multi angle measuring ruler which allows you to get the perfect angle or shape for measurement by loosening or tightening the screws on the angle tool.
• ✔ 100% Satisfaction Guarantee

Step 1 - Open the lock to facilitate movement and press the teeth against the object to match the contour.

Step 2 - Lock pins in place

Step 3 - Draw and cut the shape along the line

• ✔ WIDER AND DEEPER: This 10 inch contour gauge with lock is wider than regular ones, our master profile gauge is 5.1 inches wide so the teeth are deep enough for your profile gauge to copy deeper shapes with ultimate precision.
• ✔LOCKING FEATURE: Once the object has been contoured, lock contour gauge teeth in place for perfect traces every time. This angle finder tool and multi angle ruler will highly ease your daily work, increases your productivity, and saves you valuable time while ensuring a precise cut.
• ✔MULTIPURPOSE SHAPE DUPLICATION: This master outline gauge can duplicate any shape instantly. Ideal for any job where contour duplication is essential.
• ✔HIGH-GRADE ABS MATERIAL: Our contour gauge tool is made from durable long-lasting ABS plastic that will not scratch the original finish of the shape duplicated and will not rust over time.
• ✔EASY TO USE: This corner angle finder marking gauge is easy to use simply press the outline gauge tool on one of the shapes and lock. Trace the outline then cut into shape.

Product description

All of the Features You Need in one Amazing and Easy to Use New Tool!

Does this sound familiar?

You're measuring in a tight spot. Your traditional level won't fit. Nothing in your toolbox will help you get the job done right.

Or, you need to make a cut and you need to know the appropriate angle but you're tired of struggling with the protractor.

Or, maybe, you just want to hang a simple picture or check that something is level without going out to the garage for that old metal thing?

If you know how these situations feel, or you just want to make life easier, then our digital angle finder and level gauge is the perfect solution

Whether you're a professional or a weekend do-it-yourself warrior, we know that you want and deserve the best and we have got you covered

TickTockTools uses the highest quality materials and we care about your comfort when you work.

The strong magnetic base holds to any ferrous metal surface so you can use it with table saws, miter saws, and bandsaws for easy, hands-free measurements. The automatic backlight makes it easy to see. Zero and hold features allow accurate measurement of absolute AND relative angles, bevels, and slopes on any surface you can imagine.

Don’t Waste Time. Don’t Waste Money. Add to Cart Now.

100% satisfaction guarantee; our digital angle finder and level gauge is backed by our manufacturer 30 day money back guarantee with a free 1 year replacement warranty

Specifications



Accuracy ±0.1° for 0° and 90° and ±0.2° for all other angles



Resolution 0.1°

Working Range 2 x 180°



Power Supply 1 AAA alkaline battery (included)



Dimensions 6cm x 6cm x 2.5cm 

Weight 0.181 lbs. (0.082 kgs)

• Multi-purpose digital angle gauge with superior 3 button functionality includes a zero feature to determine relative angles and hold feature to freeze readouts; strong magnetic base for precision measurements and cuts that make your woodworking, carpentry, construction, and other jobs much easier; easily mounts to miter saw blades table saw blades and protractor tables in addition to other metal surfaces; Set up your wood or machine shop accurately and keep it that way with almost no effort
• This sturdy mini tool also functions as an inclinometer, protractor, and a level and bevel gauge giving you a variety of uses with a rotation range of 360 degrees; Large, easy to read and highly accurate LCD display with backlight automatically inverts digits 180 degrees for overhead measurements making difficult work quick and effortless; readout quickly stabilizes and the numbers won't jump around so you can work much faster
• Rigorous quality control testing and worry-free portability; Strong aluminum alloy frame; Rugged carrying case provided to further protect your level box from unnecessary wear and tear and allows you to place it with the other tools in your toolbox without worrying about it getting damaged; You can easily take this highly portable and sturdy precision tool with you anywhere you need it to go without worry; This tool fits where many traditional tools won’t including your front pocket
• 1 long lasting AAA battery is included for your convenience so no more having to wait until you can get to the store or having to steal batteries from your kids toys or the remote control to get started; automatic shut off feature also helps to preserve the long battery life; Time is your most precious asset and this tool is guaranteed to help you waste less of it in so many ways
• 100% Satisfaction Guarantee; our multi-purpose digital angle finder with level and bevel gauge is backed by our manufacturer 30 day money back guarantee with 1 year free replacement warranty; We stand behind our products so you can rest assured with your purchase

User questions & answers

Question:	How do you check calibration on this tool
Answer:	Absolutely! I use mine to run six piece molding so yes, it will do nicely with any amount of stacks or overlays or whatever. The cool thing is that you take a setting from the actual corner, lock it then transfer it to the saw. You remove one leg leaving you with the exact complement to the wall. Viola! Really a unique tool and one that I wouldn't attempt doing trim without any more than I would my Bosch laser tape measure. Both are indispensable to me now.
Question:	Does it have magnets on three sides or bottom only
Answer:	Hello, The red is the same exact product as the orange one. We did a rebranding to our line and just changed the color to orange. We did not make any changes to this product. If you have any more questions, please reach out to the manufacturer at [email protected]
Question:	Can you remove the magnets? I need something that will measure the angle of barcode scanners
Answer:	This product is made in China
Question:	Will this device show me if the table on my table saw is level. If the floor my table saw sits on is not level the device won't work right
Answer:	Yes, I find the easiest way is to hold the crown molding in the miter saw at the same angle it will be applied at the ceiling. The Bora angle duplicator can then be used to determine the inside and outside corner angles to set the miter saw.

• 【Good Choice for Beginners】Ruler and protractor combination for easy measuring. Great gift for woodworker, constructor DIYers etc.
• 【New Color】Black ruler and white scale make it easier to read.
• 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects and daily use. Folded length: about 7.5 inch/220mm.Total length
• 【Rounded edge】Protect your fingers
• 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle.

User questions & answers

Question:	Could one use this this to measure the angle of the tip of a blade on a knife
Answer:	Just on the bottom.
Question:	in what country was this product manufactured
Answer:	No. The magnetic feature is built in. You would maybe be able to disassemble it and remove it..... but then it may not be calibrated anymore. Not sure what your project is but maybe a small thin piece of bismuth between the magnet and your project. Bismuth doesn’t allow magnetism to pass through. You could maybe 3m double side tape it to the bottom. However, now that I think about it.... I think the other side isn’t magnetic. Just checked. The bottom is the only magnetic side. So you would be able to use it on its side or upside down. You could set the magnetic side on something that is a known good 0 angle and then rotate it to one side. It would say 90, then hit the 0 button so your reading when using it on the side wouldn’t need any calculations. Hope this helps
Question:	does it have a flip display option
Answer:	Hi Frisco! That is a great question! Actually, the device will work perfectly and tell you that your table saw table is not level! If you want to make sure the table saw table is level, what you want to do is first put the unit on a known level surface and then push "zero". Then put the unit on your table saw table and it will tell you how far off it is and then you can adjust your table saw table to make sure it is level. You are correct that if the floor isn't level, if you put a flat surface on top of that floor and measure, you are going to get the angle of the floor which won't be zero. I hope this makes sense but if not, feel free to follow up and we'll be happy to help you further! Thanks so much!

Product features

GemRed 7-Inch Digital Protractor Angle Finder

• Item No. 82305-200A
• Material type: aluminum
• Accuracy: ±0.3 degree
• Measurement range: 0~360degree
• Resolution: 0.1degree
• Display: 1-decimal
• Folded length: 220mm/8.5inch
• Total length: 400mm/15.75inch
• Length scale: 0~7inch; 0~400mm

Locking at Any Angle

Zero at Any Point

Inside Angle

Outside Angle

Product description

Technical Details

    Resolution: 0.05°

    Measurement range: 0-360°

    Angle scaling accuracy: ±0.2°

    Ruler measurement range: 0~7 in; 0~400 mm

    Battery type: 3V CR2032 lithium battery (included)

    Package include: Angle Finder Ruler*1, CR2032 Battery*2

Features

【2 Functions' Combination】Ruler and protractor combination for easy measuring.

【High Accuracy】Accuracy of this protractor is ±0.2 degree. It is a good choice for most projects and daily use.

【Locking Function】For read it easily, our angle finder could be locked at any angle.

【Large LCD display】This digital angle finder equiped with full screen large LCD display, easy to measure and easy to read.

【Measure 360 degrees】Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside angles.

【Power supply】CR2032 3V lithium battery power supply, large capacity standby with automatic power-off function, can work more than 2000 hours, saving power consumption and extending battery life.

Multifunction

1. Woodworking: adjusting angles of table saw, miter saw, band saw etc.

 2.Construction: Ideal for framing, custom furniture building, stair and patio construction. Flooring, tiling,trim and crown moulding.

3. Sketching, drawing

• 2 in 1 Digital Protractor: This Digital Protractor features laser-etched metric and imperial measurements on ruler edge,plus accurate digital readout,can measure both angle and length,ideal for use in carpentry, renovation work, or drawing
• High Accuracy & Durable Material: Accuracy of this corner angle finder is ±0.2 degree.Durable stainless steel ruler supports measurement between mm and inch,makes it can measure length (0~400 mm/0~7 inch) convenient and accurately
• 0-360°Measuring & Locking Function: A hinge mechanism on the miter protractor allows a full 360 degrees to measure inside outside and reverse angles,and a locking screw can hold any angle when use your miter saw to make your cut.The angle finder will automatically display the reverse angle
• Zero Setting & Hold Function: Angle woodworking tool can be zeroed at any point in the swing to find relative angle.Display has a hold function to freeze movement for accuracy.Plus the display can be inverted for easy reading
• Large LCD Screen & AUTO OFF: The angle finder ruler has a large LCD display to get quick and clear digital readout. Automatically shut down after 5 minutes of inactivity.Powered by coin battery, comes with 2 batteries as gift

• 【2 Functions' Combination】Ruler and protractor combination for easy measuring inside and outside angles. 【Digital Display】Easy to read.
• 【Durable Rulers】Well-made stainless steel rulers and laser etched measurements offer clear reading and years' usage.
• 【High Accuracy】Accuracy of this protractor is ±0.3 degree. It is a good choice for most projects like woodworking, crown molding and daily use. Folded length: about 7.5 inch/220mm.Total length 400mm.
• 【Locking Function】For read it easily, GemRed angle finder could be locked at any angle. *NO REVERSE ANGLE/DISPLAY FUNCTION.
• 【Notes】Stainless steel edge is sharp, please be cautious while using AND KEEP IT AWAY FROM CHILDREN.*SCRATCHES ON RULERS ARE RESULTED FROM TOUCHING WITH EACH OTHER. IT MAY APPREAR ON BRAND-NEW PRODUCT.

User questions & answers

Question:	will this fit tight in an inside corner
Answer:	Ii have never tried that. Maybe
Question:	Does it split the angle in half for miter cuts
Answer:	I don’t know, haven’t looked. But works great
Question:	Are measurements laser ecthed
Answer:	The one I received was defective, it kept turning on by itself.
Question:	How wide an angle, in degrees, does this measure
Answer:	I would just check calibration by placing it next to a "very good" bubble level and confirm they both read "Zero". Then I would place it on roofing triangle and check for 45 degrees. Once you find a perfect level surface that is pretty much permanent, I would use that surface for future calibration checks. This may not be the best or most accurate way of checking calibration, but minus calibration tools, I think in most cases this would suffice. Hopefully someone out there has a more accurate way of checking if that is required.

Product features

Technical Description & Operation