12 best laser sensors

Product description

Note:

The installation of electronic modules requires basic knowledge and requires a certain electronic professional foundation and hands-on ability. Please purchase carefully!

Manual measurement, with small error. Please check size in detail before purchase.

Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.



Package Includes: 5Pcs

• Supply voltage: 5V
• Output: High level when there is laser irradiation, low level when there is no laser irradiation.
• This sensor uses a non-modulated laser receiver. Please use it in a place where there is no light indoors. Sunlight or other lamps may interfere. It is recommended to use it in a dark environment.
• Size: 1.52CM*2.22CM (1CM=0.393inch)
• We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.

User questions & answers

Question:	does anyone know how or where i go to get a datasheet for this receiver? I'm doing arduino project and i really cant proceed without this info
Answer:	Most of the devices in this are Dual-Band, meaning they operate over RF (915MHz) and AC (electrical wiring). There are standalone devices like the leak sensor, thermostat, and camera that do NOT have a power line connection so they are RF only. With Insteon, if you plug/wire it in directly (no transformer) it is Dual-Band, otherwise it will be RF only. For a robust system, you want multiple Dual-Band devices because they serve as repeaters.
Question:	do you need to add extra resistors to the wiring
Answer:	Insteon uses a forward-facing triac dimmer that is designed for use with incandescent bulbs. While some users may find success when using our products with dimmable LED bulbs, that is not a guaranteed result.

Product description

Description:

PCB size:1.5*1.9cm

work voltage:5V



Output:

output high level when receive laser signal

output low level when not receive laser signal



Note:

The sensor uses a non-modulated laser receiver, please use indoors where no light, sunlight or other fixtures may interfere, recommended for use in dark environments.



Package Includes:

5 x Laser Sensor Module

• The sensor uses a non-modulated laser receiver.
• Please use this sensor in dark environments or indoors where no light. Sunlight or other fixtures may interfere.
• It output high level when receive laser signal, and low level when not.
• If you buy 1, you will receive 5pcs sensor
• If you have any issue when using our product,or you need product use documentation， please contact us directly for assistance.we will solve your problem in 24 hours.

User questions & answers

Question:	I'm looking to activate a speaker by pointing a laser pointer at a sequence of objects. Would these be better than photoresistors
Answer:	This one is for red lasers.
Question:	What photodiode is used
Answer:	I use it with dw088 red laser cross line. Don’t know for dw088k. Works very well with dw088. Good day!

Product description

Seco-Larm E-960-D190Q ENFORCER Twin Photobeam Detectors with Laser Beam Alignment, 190' (60m) Outdoor/390' (120m) Indoor Sensing Range, Non-polarized Power Onputs, Pack of 1 Including 2 Detectors

Key Features

• Built-in laser beam alignment system speeds accurate, reliable positioning
• Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
• Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case for indoor & outdoor use
• Anti-frost system so that beam functions even in extreme conditions
• Automatic input power filtering with special noise rejection circuitry
• NC/NO alarm output
• N.C. tamper circuit included
• Non-polarized power inputs
• Quick, easy installation with built-in laser beam alignment system
• Interruption time adjustable for nearly all situations

Specifications

• Current Draw: 70mA
• Sensing Range: Outdoor- 190' (60m), Indoor- 390' (120m)
• Operating Voltage: 10~30VAC/VDC (Non-polarized)
• Interupt Speed: 50msec~700msec (variable)
• LEDs - Red: Alarm LED (Receiver) ON: When an alarm is initiated
• LEDs - Yellow: ON: When receiver's signal is weak or when beam is broken
• LEDs - Green: Operation LED (transmitter & receiver) ON: When power is applied.
• Detection System: Simultaneous break of 2 beams
• Alarm Output: NO/NC relay, 1A @ 120VAC, min. 1 sec.
• Tamper Output: NC switch, 1A@120VAC
• Case material: PC Resin
• Laser Wavelength: 650nm
• Operating Temperature: -13º~+131ºF (-25º~+55ºC)
• Laser Output Power: <5mW
• Alignment Angle: Horizontal (+/-)90º, Vertical: (+/-)5º
• Weight: 2.5-lb (1.1kg)

• Built-in laser beam alignment system speeds accurate, reliable positioning
• Twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc.
• Lensed optics reinforce beam strength & provide excellent immunity to false alarms due to rain, snow, mist, etc.
• Weatherproof, sunlight-filtering case for indoor & outdoor use
• Anti-frost system so that beam functions even in extreme conditions

User questions & answers

Question:	Will the water from my rainbirds trigger the beam? Also, how visible are the beams? Will they appear when watering or in the rain
Answer:	Any standard tripod will work, rod types are many, depends on what your trying to do.
Question:	So when the beam is broken there is an alarm sounded
Answer:	It's not that you "need Siri"; rather, it's that INSTEON has taken the time to pre-implement the necessary code/app/mechanism for you to be able to control the system right out of the box. In my case, because I have a Windows device, either I or someone else would have to write an app that talks to the INSTEON API. Someone already did, and INSTEON actually has its own app in the Windows Store (which is INCREDIBLY SLOW!). If I remember correctly, however, there is/was a SKU which made to work directly with Siri, meaning that you can't buy that one expect it to write your own app to interface with the API. That particular SKU is effectively a closed system. I've got the 2582-242; it works just fine with my Windows 10 devices (mobile and otherwise) and my Windows 8.1 devices as well.One thing I will say, that is not clear until you start reading through a lot of the print, is that you MUST have at least two components of the INSTEON system always enabled and in communication with the Hub. For practical purposes you want these to be items that are plugged in or otherwise drawing AC power... because batteries run out. Why at least 2? Because of the way the system works. Long story short, when installed all the INSTEON components send messages to one another and the Hub is the command center for it all. So, say you have a light switch and a bulb. You're golden as long as the INSTEON switch doesn't control the INSTEON bulb. One, because that's unnecessary (the switch already does what the bulb would do) and two because when you set the switch to "off" the bulb is no longer powered... which means that there is effectively only one component "on" and in communication with the Hub now. So, if you're going to get the INSTEON bulbs, put them in a socket that you don't plan on turning off at the wall. Once you get your first two components registered you don't have to worry about this anymore -- it just works from that point forward.I hope I explained that clearly enough.
Question:	Is this power one side or power booth side
Answer:	I don't have the Amazon Echo. According to the Insteon site, both thermostats are not supported. Here is the link: http://www.insteon.com/support-knowledgebase/2015/9/10/supported-insteon-devices-with-amazon-echo
Question:	How are they powered? do they use batteries
Answer:	There is an app for Windows 10 mobile, Android, and Apple. You would find it through searching for Insteon in their respective stores. I have worked with all three apps and the Windows interface is the best by far. There is also a Windows 10 app for tablet/desktop that mirrors the phone app exactly which makes it highly flexible.

Product description

KY-008 Laser Transmitter Module:

Operating voltage:5V

Output wavelength:650 nm

3 pins module

Size: 15 * 24mm

Laser Receiver Sensor Module:

Supply Voltage: 5V.Size: 15.2x22.2mm/0.60x0.84Inches.

Output:Output high level when there is laser irradiation.Output low level when no laser irradiation.

When the laser irradiation, the high level action relay module does not operate.Relay module action with high level action when laser front irradiates: relay module action with high level action when laser back irradiates.



Note:

Manual measurement, with small error. Please check size in detail before purchase.

Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.



We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.



Package Includes:2Sets

2Pc x KY-008 Laser Transmitter Module

2Pc x Laser Receiver Sensor Module

• Operating voltage: 5V
• Source wavelength: 650 nm
• Apply to: for Arduino AVR
• Model: 1*Laser Receiver Sensor Module+ 1* KY-008 Laser Transmitter Module
• Laser Receiver Sensor Module uses the non modulated laser receiver, please use in the room where without the light, the sunlight or other lamps and lanterns will interfere, suggested in the dark environment use.

Product description

Seco-Larm E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft (15m) sensing distance; Small size for a less conspicuous installation

SECO-LARM E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft (15m) sensing distance; Small size for a less conspicuous installation; Simple to install; Built-in AGC control to filter out lighting disturbances; Signal strength indicator for easier alignment; LED indicators for power, signal strength, and trigger; Weatherproof for outdoor as well as indoor use (IP65); Mounting hardware included

Key Features

• 4 selectable frequencies to reduce interference
• Up to 50ft (15m) sensing distance
• Small size for a less conspicuous installation
• Simple to install
• Built-in AGC control to filter out lighting disturbances
• Signal strength indicator for easier alignment
• LED indicators for power, signal strength, and trigger
• Weatherproof for outdoor as well as indoor use (IP65)
• Mounting hardware included

Specifications

• Number of Beams: 1
• Current Draw: Transmitter 15mA@12VDC/Receiver 30mA@12VDC
• Infrared LED Wavelength: 940nm
• Operating Voltage: 10~24VDC
• Interupt Speed: 50ms
• LED Beam Spread Angle: Approximately ±10°
• LEDs-Red: Indicates transmitter and receiver are not aligned or beam is broken (Alarm)
• LEDs-Yellow: Indicates receiver's signal is weak or beam is broken (Signal)
• LEDs-Green: Indicates connected to power
• Output: NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC
• Enclosure: IP65
• Operating Temperature: -13°~131°F
• Operating Humidity: 0~95%
• Dimensions: 3-11/16" x 2-3/8" x 1-13/16"
• Weight: 2.6-oz

• 4 selectable frequencies to reduce interference, Up to 50ft (15m) sensing distance
• Small size for a less conspicuous installation, Simple to install
• Built-in AGC control to filter out lighting disturbances, Signal strength indicator for easier alignment
• LED indicators for power, signal strength, and trigger; Weatherproof for outdoor as well as indoor use (IP65)
• Mounting hardware included, Dimensions: 3-11/16" x 2-3/8" x 1-13/16", Weight: 2.6-oz

User questions & answers

Question:	Is power supply included
Answer:	yes, horizontal angles.
Question:	If you don’t already have a wired alarm in your house, this is useless. I wish someone would manufacture a stand alone wireless system
Answer:	Both can be used
Question:	Does this have up and down adjustments for alignment
Answer:	The RL-SV1S DB comes with alkaline batteries. The RL-SV2S RB version has the rechargeable battery and charger.
Question:	Can i use this with an arduino or raspi for security projects
Answer:	I’m sure it does from factory defects.

Product description

Quickly and accurately detect red and Green laser lines in bright conditions with the Green/red line laser detector. The detector is capable of detecting horizontal and vertical laser lines up to a distance of 262 feet. Other features include a rubberized housing over-mold for increased protection, Dual front and rear display, top-mounted magnets for attachment to metal surfaces, and horizontal/vertical sided bubble levels.

• Capable of detecting horizontal and vertical laser lines up to a distance of 262 feet
• Rubberized housing over-mold for increased protection
• Dual front and rear display for added convenience
• Top-mounted magnets for attachment to metal surfaces
• Dust and water resistance with IP 65 protection rating for increased durability

• [New Wider Angle Upgrade] This updated product from Fosmon is perfect for a one or two car garage. The angle of the two lasers is widened up to 95 degrees, which can safely and efficiently assistant two cars.
• [Park Correctly and Easily Every Time] Do you have trouble about parking in a garage? Are you often too close to the side, too far forward, or too far back? Fosmon's dual laser parking assistant will allow you to park in the correct spot every time. With its simple installation and setup, the garage parking aid will be ready to use in minutes. No more busted bumpers and doors.
• [Motion Activated Laser] The motion activated lasers have a detection range of 33 feet/10 meters, and will shut off after 30 seconds without motion.
• [Provides Individual Laser Control] The garage parking aid allows for individual laser control for use with one parking stall or two. Simply toggle the button located on the side of the unit to switch between one or two lasers. The lasers have a 360-degree adjustment, ensuring that no matter the vehicle or parking spot size, the laser will be able to hit the mark each and every time.
• [Battery Backup and Motion Activated] Even if the power goes out, the dual laser garage parking aid can use a 9v powered battery backup. NOTE: Battery not included.

User questions & answers

Question:	Can this be mounted on the front wall
Answer:	Yes, Per Bosch Auto Part Product Catalog #232103064 does fit a 2010 Mini Cooper R57. The vehicle requires 2 of the same part # as there are two camshaft position sensors. Unable to confirm the Engine Code.
Question:	How long is the electrical cord
Answer:	Yes part # 0232103064 is the correct camshaft sensor for your Mini
Question:	I just received this and one of the lasers stays on constantly. Is it broken
Answer:	The cord is about 4 ft long and the plug is for a standard outlet. It's an adapter type plug similar in size to a phone charging wall plug.
Question:	dual laser control button seems broken
Answer:	Yes. Anything that moves in front of the laser will make it light up. I don't find that to be a problem.

Product features

Fosmon's Dual Laser Motion Activated Parking Assistant Makes Parking Easy

Eliminate the risks that come with not parking correctly in an enclosed parking spot or garage. Fosmon's dual laser parking assistant will allow you to park in the correct spot every time. With its simple installation and setup, the garage parking aid will be ready to use in minutes. No more busted bumpers and doors.

Battery Backup and Motion Activated

Even if the power goes out, the dual laser garage parking aid can use a 9v powered battery backup. NOTE: Battery not included. Whether you are setting up one laser or two, the garage parking aid has a large motion sensor built in, allowing for the lasers to automatically turn on and off based on the movement of your vehicle. The lasers will turn off after 30 seconds of no movement.

Provides Individual Laser Control

The garage parking aid allows for individual laser control for use with one parking stall or two. Simply flip the toggle button located on the side of the unit to turn on one laser or two. The lasers have a 360-degree adjustment, ensuring that no matter the vehicle or parking spot size, the laser will be able to hit the mark each and every time.

Product description

DEWALT DW0892G Green Laser Detector is accurate to 1.5mm at 30m. It has a working range 165ft (Radius). This unit detects laser beam indoors and out. It offers both front and rear back-lit LCD displays, along with an audible signal with adjustable volume control. An automatic shutoff turns off detector if inactive for 5 minutes as a battery-saving feature. It also offers top-mounted magnets for attachment to ceiling track or steel studs, with a heavy-duty quick release clamp also included. This detector operates on a 9v battery (included).

• Accurate to 1.5mm at 30m, working range 165ft (Radius)
• Front and rear back-lit LCD displays
• Audible signal and automatic shutoff
• Top-mounted magnets for attachment to ceiling track or steel studs

User questions & answers

Question:	Is this detector compatible with dewalt dewalt dw0822lg green crossline laser
Answer:	Yes it is i use mine on the same dewalt laser it works better than the original dewalt did it reads a lot further in day light.
Question:	Will this work with my DW073 rotary laser, red beam
Answer:	I am not sure . It works perfectly with my spinning laser . But is does not work with my fixed laser line .
Question:	Is this self leveling
Answer:	I would think so. Picked up my DeWalt with no problem
Question:	Is this compatible with my dw0825lg laser
Answer:	That is what I bought it for but it does not work as well as I expected. I got it for sunny days and it does not work well when it is bright out.

Product description

Specification

Number of Beams: 2 beams

Install Distance(Max.) Outdoor: 60m/ Indoor: 300m

Dtection Mode: 2 beams blocked simultaneous

Optical Source: Infrared digital pulse beam

Relay Contact Output: NO.NC

Response Speed: 50 ~ 700msec

Contact Rating Output: AC/DC30V 0.5AMax

Operation Temperature: -25 °C - 55 °C

Operation Humidity: 5% - 95% RH (relative humidity)

Power Supply: DC 13.8 ~ 24V AC 11 ~ 18V P ≥ 15W



Product Feature

1.The sensor has a built-in laser beam alignment system that speeds accurate, reliable positioning.

2.Ensure the safety of your property by adding this perimeter-style photobeam sensor to your security system.



Package Content

1 x Laser detector laser alarm beam sensor(1x transmiter, 1x receiver)

1 x Installation accessories(Including screws)

1 x Operating instruction.



Risk Free Shopping

Yohii hopes to provide you with the most satisfactory service. Full refund is guaranteed if the item has any quality issue after receiving.



About Yohii

Our goal is to provide you a satisfied and happy shopping. Please email us if our products or services have any problem. We will do our endeavor to resolve your issues.

• Reliable & Safe: Yohii laser alarm with twin infrared beams provide reliable perimeter security, minimizing false alarms from falling leaves, birds, etc. Lensed optics reinforces beam strength & provides excellent immunity to false alarms due to rain, snow, mist, etc.
• Principle: This is Alarm Two Beam photoelectric infrared detector ABT- 60m. Install them at the opposite positions. Then there is a infrared area between these two detector parts. When someone passes the infrared region for an adjusted response time, the detector will send alarm signal to the security alarm host (which not included here) work with 2pcs power apater.
• Powerful Function: Holographic spot real-time report. Unique displacing receiving, transmitting parts with big power. Full function checking, self-adaption in environment and trouble locking.
• Durable: Powerful Automatic Adjustment Design-The transmit power will be adjusted automatically according to the environmental conditions, which greatly extends the life of the launching tube, while lowering power consumption.
• Scope of Application: Great to be installed for security system in school, office building, hospital, home yard, etc.

User questions & answers

Question:	How can I view the wiring diagram
Answer:	Thank you for your question. The BT300 Tripod has an adjustable main elevator column with height adjustment range of 20". You don't need to re-assemble to extend the tripod just crank it up. For further assistance, contact us at 1-877-BOSCH99 (1-877-267-2499) from Mon-Fri 7A-7P CST.
Question:	Are they just IR sensors, what are power supply they need
Answer:	The Leica NA524 leve does not include the tripod. But your CST tripod will work with the Leica NA524 level as soon as the tripod has 5/8x11 thread.
Question:	Minimum Spacing between sensors
Answer:	You can use both flat and domed head tripod for this level.
Question:	Does this make a noise when the beam is broken
Answer:	It is an automatic optical level, but not self leveling.

• ✔️HUEPAR DEDICATED RECEIVER- Huepar LR-6RG receiver can ONLY be used with Huepar Line Laser Levels that feature Pulse Mode Function. Please pay attention to that this receiver can NOT be used with Rotary Laser Level. And the receiver can NOT be used with Huepr 9011G&9211G laser level. It is recommended to use in accompany with Huepar 902CG/901CG/8211G/BOX-1G/BOX-1R/GF360G/GF360R/622CG/622CR/621CG/621CR/603CG/603CR/602CG/602CR/DT03 Laser Level.
• ✔️AVAILABLE FOR RED AND GREEN PULSE LASER- It is necessary to Turn ON the Pulse Mode of the laser level when using with Huepar LR-6RG laser receiver. This receiver allows detection of Red and Green pulse laser beams in difficult light conditions, distances up to 200ft (60m).
• ✔️CLEAR MULTI-SIDED READOUTS- Ergonomic design with display on the front, side and back of receiver, offers easier visual readout. This unit is outfitted with a dual-sided Bubble Vial on both the front and top, in order to more accurately determine the level.
• ✔️PRECISE OPTICAL AND ACOUSTIC SIGNALS- This laser receiver features a user-friendly interface and is smart in its simple design. Optical and acoustic signals help to locate the laser plane quickly and accurately. The LED indicator provides a clear and accurate signal. Beep sounds will remind you when you find the target.
• ✔️LONG BATTERY LIFE AND CLAMP HOLDER- The receiver comes with a 9V dry battery, providing you with about 70 working hours. There is also an automatic shut-off feature that power down the device after about 8 minutes of being idle to extend battery life. The attached heavy-duty clamp makes it easy to mount the detector to a rod or other target point.

User questions & answers

Question:	El receptor es compatible con el laser huepar 603cg-bt
Answer:	Yes, the DW0892G is compatible with the DW0822LG.
Question:	What is that vertical bubble level on the side for
Answer:	No, this is not compatible with DW073
Question:	Difference between lr-6rg and lr-5rg
Answer:	No, the DW0892G is not self leveling. The DW0892G is a laser line detector. Please contact DEWALT at 1-800-433-9258 for further assistance.
Question:	My unit does not make any sounds. I push the volume button but nothing happens.. any insight
Answer:	From what I’ve read it works with all green laser. It’s the same wave length .

Product features

Using Tips

• !!! It is Necessary to turn ON the Pulse Mode of the Laser Level when using with the Receiver !!!!!!
• !!! Can NOT be used with Huepar 9011G/9211G/FL360R/FL360G/8300G laser level !!!
• !!! Recommended to Use the receiver with Huepar GF360G/GF360R/621CG/621CR/622CG/622CR/603CG/603CR/602CG/602CR/503CG/503DG/902CG/901CG/8211G/BOX-1G/BOX-1R/B03CG/B02CG/B21CG/DT03CG Laser Level !!!
• Make sure the laser level and the Receiver windows were clean.
• Recheck the batteries in both devices (Laser level & Huepar Laser Receiver).
• Make sure your laser level can be used in accompany with Huepar Receiver.

Precise Optical Signals

Move the Detector as the Direction Shown:

• Datum Lower than Laser Beam – Move Up
• Datum Higher than Laser Beam – Move Down
• When Datum in Line with Laser Beam – The LED Indicator Light is Displayed in Green

Buzzer Remind

A beeping tone signals that the laser beam has been detected:

• A slower beeping tone signals – Move Up
• A fast beeping tone signals – Move Down

Clear multi-sided readouts

Three-Sided LED Displays, provide clear LED signal prompts on three sides

• LED displays on the front
• LED displays on the side
• LED displays on the back

Built-in Bubble and Holder

LR-6RG Laser Detector comes complete with a compatible rod mounting bracket. The built-in bubble level provides an extra measure of leveling accuracy.

• 📍【High-Precision Detector】 Quickly locate the stud wood metal AC wire. Wood measurement has two modes to detect depth to the greatest extent: precise mode (20 mm), depth mode: (38 mm); metal measurement mode, which can measure non-magnetic metals: (80 mm) and magnetic metal (100 mm); power cable Mode (40mm).
• 📍【2 in 1 Stud Finder Laser Distance 】 The new measuring device can not only measure metals (steel rods, copper pipes) and cables, wood, etc. hidden under walls, ceilings, floors and gypsum boards, but also measure laser ranging, area. Whether you are a professional, homeowner or DIY enthusiast, you can find great use in this stud scanner.
• 📍【Multi-Function Distance Meter】 This instrument uses laser precision technology as a distance meter, with an accuracy of ±5MM and a measurement distance of up to 40m; it can be freely switched between M / In / Ft; multiple measurement functions Range, distance, length, continuous measurement, Pythagorean method, and 30 sets of data storage functions.
• 📍【Energy Saving and Calibration Function】 The device has an automatic shutdown function. If there is no function within 20 seconds, it will automatically shut down. In addition, the device is powered by a lithium battery. We provide a USB charging cable that can be used multiple times; calibrating before use can provide you with maximum reliability and accuracy.
• 📍 【Mute Setting and LCD Backlight】 Large backlit screen can provide better visibility in dark areas. Using the mute function, you can turn the signal tone on or off as needed. Suitable for libraries, classrooms and other quiet places.

Product features

Locator Specifications

Wood (foreign body): 20 / 38MM

AC cable: 40MM

Non-magnetic metal: 80 MM

Magnetic metal: 100MM

USB charging

Wood Measurement

• Maximum detection depth: precision mode: 20 mm, depth mode: 38 mm. Press and hold the button in the center to switch to precision and depth scan modes.

• The foreign body detection mode detects objects in plasterboard walls, plywood, solid wood and coated wooden walls.

Metal Measurement

• Press the center button to turn on the detection function and press the right button to access the detection metal interface.

• Place the instrument on the surface of the detector and move the instrument left or right in the same direction. When the instrument gradually recognizes the metal object, the metal symbol * appears on the screen and gradually grows as the instrument approaches the metal object. At the same time, the loudspeaker reports "metal". When the instrument is closest to the metal, a central symbol appears on the display.

Power Cable Measurement

• Press the center button to turn on the detection function, then press the right button to access the metal detection interface.

• Place the instrument on the surface of the detector and move the instrument left and right in the same direction. When the instrument gradually recognizes the power cord, the * cord symbol appears on the screen and gradually increases as the instrument approaches the power cord.

Screen Declaration

A: Magnetic / non-magnetic

B: Depth

C: Central location

Single and Continuous Measurement

• Single measurement: Briefly press the "ON" button to switch on the device. The device automatically switches to the individual measurement interface of the laser and the loudspeaker sends the current measurement mode. Aim the laser at the target to be measured and press the button for single measurement. The measurement result is displayed in the main display area and the loudspeaker announces the current value

• Continuous measurement: Long press the "ON" key to enter the continuous measurement mode. The maximum value (Max) and the minimum value (Min) are displayed in the auxiliary display area.

Area Measurement

• Area measurement: Measure the area of a rectangle. Measure the length and width of the rectangle according to the screen mode. The results are displayed in the main display area.

Single Pythagorean Measurement

• Measure one hypotenuse side and the right angle side according to the Pythagorean theorem principle, and the instrument automatically calculates the length of the other right angle side that is displayed in the main display area. Note: When testing the Pythagorean method theorem, the two measurements mean that the reference point of the measurement must remain unchanged and the line between the two laser points and the three reference points must be a right-angled triangle, otherwise the calculation result differs significantly from the actual results.

Double Pythagorean Measurement

• Similar to the simple Pythagorean measurement, when measuring 2 hypotenuse edges and 1 right-hand edge, it must be ensured that the reference points of 3 measurements remain unchanged and the right-hand edge must be measured perpendicular to the target edge, otherwise the calculated results differ significantly from the actual ones Results.

• TOF10120 range sensor provides accurate and repeatable long range distance measurement for high-speed autofocus (AF). The innovative time-offlight technology allows performance independent of object reflectance.
• TOF10120’s time-of-flight sensing technology is realized by Sharp’s original SPAD (Single Photon Avalanche Diodes ) using low-cost standard CMOS process. It enables accurate ranging result, higher immunity to ambient light and better robustness to cover-glass optical cross-talk by special optical package design.
• Applications: High-speed AF; Continuous AF for video; User detection for Personal Computers/Laptops/Tablets; Robotics (obstacle detection); White goods hand detection in automatic (faucets, refrigerator).
• Single power supply; UART I2C interface for device control and data transfer; Lead-free, RoHS compliant.
• Please ask for the datasheet via Amazon mail after you order it.

User questions & answers

Question:	What is the laser wavelength
Answer:	Hello, I am sorry to hear that you are not happy with the color match of your WASHLET and toilet. Because the WASHLET is plastic and the toilet is ceramic, sometimes there can be a slight difference in the color shade due to manufacturing process capabilities. Most people will not even notice this difference, but sometimes certain lighting can make it more apparent. If you feel the color difference is extreme, please reach out to us directly for assistance. Our Technical Support team is standing by to take your call. They can be reached at [email protected] or call 1-888-295-8134 between 8am - 8pm Mon - Fri EST and press 4 when prompted. We also have live chat on the TOTO USA website. I hope this helps and thank you for choosing TOTO.
Question:	can I use this to precisely measure from 1-15cm
Answer:	No its 110 volts
Question:	How can i get a datasheet
Answer:	No it cannot
Question:	What would the Range on this be for a 3D Scanner
Answer:	This does not have a premist function.

Product features

Application

• High-speed AF
• Continuous AF for video
• User detection for Personal Computers
• Laptops/Tablets
• Robotics (obstacle detection)
• White goods (hand detection in automatic Faucets, refrigerator

Wire diagram

1, GND Power ground GND

2, VDD power supply positive 3～5V

3, RXD input INPUT serial port input TTL level RXD OUTPUT TTL

4, TXD output OUTPUT serial port output TTL level TXD OUTPUT TTL

5, SDA input/output INPUT/OUTPUT I2C data TTL level I2C DATA I/O TTL

6, SCL output OUTPUT I2C data TTL level I2C CLK OPUTPUT TTL

The Arduino board is connected to the distance sensor, the UART reads the distance data through RXD-TXD, the I2C reads the distance data through A4-A5, the UART reads removes A4-A5, and when the Ardunio code uploads the program, remove the module. Connect after the upload is successful Arduino code UART and I2C each