13 best distance measurement sensors

• Operating voltage: DC 5V
• Quiescent current: 5mA. Farthest distance: 4.5m.
• The device is waterproof, but it couldn't work underwater. Please note it.
• High accuracy, strong anti-jamming, small size, easy to use, low voltage, low power consumption.
• Integrated with wire enclosed waterproof probe, suitable for wet, harsh measurement occasions.

User questions & answers

Question:	What connection is the sensor to the board
Answer:	This is manufactured in China. -American Standard Tech Team
Question:	Does it just report everything less than 25cm as 25cm (in the equivalent of time of travel)?...or does it not report at all below 25cm
Answer:	I believe it is a water heater in the bidet. Since the bidet gets water directly and has little to no reservoir it is considered "continuous". There is unlimited heated water as long as the bidet is getting water. But I am guessing.
Question:	What kind of screws are needed to secure the sensor to a surface (e.g. wood)? I am guessing you would need extra tall screws
Answer:	It has not been a problem for us.
Question:	Can this sensor be used under water? How well is the measure under this condition
Answer:	Yes, you can install Lotus seat by yourself. Just click on the 'installation' on the Lotus site home page for instructions.

Product description

DFRobot URM09 Ultrasonic Sensor(Gravity I²C)(V1.0)



Introduction

URM09 Ultrasonic Sensor(Gravity i2c) is a distance sensor designed for fast ranging and obstacle avoidance application.



Specification

Supply Voltage: 3.3~5.5V DC

Operating Current: 20mA

Operating Temperature Range: -10℃～＋70℃

Measurement Range: 2cm～500cm (can be set)

Resolution: 1cm

Accuracy: 1%

Frequency: 50Hz Max

Dimension: 47mm × 22 mm/1.85”× 0.87”



Shipping list

1 x URM09 Ultrasonic Sensor(Gravity I²C)(V1.0)

1 x PH2.0-4P Connector

• DFRobot URM09 is an ultrasonic sensor specifically designed for fast ranging and obstacle avoidance application. Its measuring frequency can reach up to 50Hz.
• The sensor adopts built-in temperature compensation and I2C communication.
• There are three measurement ranges designed for programs to select: 150cm, 300cm and 500cm. Please note that shorter range will provide shorter ranging cycle and lower sensitivity. You may need to set it according to your actual use.
• Besides, the sensor is equipped with on-board LDO, which is able to avoid performance attenuation within power supply range.

Product description

Description:

The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module.



The VL53L0 uses ST's Flight Sense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained radar system.



The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use.



PIN Description:

VDD Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)

VIN This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I2C lines high to this level.

GND The ground (0 V) connection for your power supply. Your I2C control source must also share a common ground with this board.

SDA Level-shifted I²C data line: HIGH is VIN, LOW is 0 V

SCL Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V

XSHUT This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted.



Package included:

2 x VL53L0X Ranging Sensor Module

1 x 12Pin Dupont Cable Female to Male

1 x 12Pin

• A time-of-flight ranging system integrated into a compact module
• Range from ±3% at best to over ±10% in less optimal conditions
• Maximum Sensoring Distance: 2m
• Working Voltage: 2.6V - 5.5V
• Package content：2Pcs VL53L0X Ranging Sensor Module, 12Pin Dupont Cable Female to Female

• 1. Distance measuring sensor is united with PSD, infrared LED and signal processing circuit
• 2. Short measuring cycle (16.5ms)
• 3. Distance measuring range : 2 to 15 cm
• 4. Compact size (27.0 × 10.8 × 12.0mm)
• 5. Analog output type

Product features

Outline

1. Distance measuring sensor is united with PSD, infrared LED and signal processing circuit
2. Short measuring cycle (16. 5ms)
3. Distance measuring range: 2 to 15 cm
4. Compact size (27.0x 10.8 x 12.0mm)
5. Analog output type

Schematic

1. Cleaning robot
2. Personal robot
3. Sanitary

• TOF10120 range sensor provides accurate and repeatable long range distance measurement for high-speed autofocus (AF). The innovative time-offlight technology allows performance independent of object reflectance.
• TOF10120’s time-of-flight sensing technology is realized by Sharp’s original SPAD (Single Photon Avalanche Diodes ) using low-cost standard CMOS process. It enables accurate ranging result, higher immunity to ambient light and better robustness to cover-glass optical cross-talk by special optical package design.
• Applications: High-speed AF; Continuous AF for video; User detection for Personal Computers/Laptops/Tablets; Robotics (obstacle detection); White goods hand detection in automatic (faucets, refrigerator).
• Single power supply; UART I2C interface for device control and data transfer; Lead-free, RoHS compliant.
• Please ask for the datasheet via Amazon mail after you order it.

User questions & answers

Question:	What is the laser wavelength
Answer:	Hello, I am sorry to hear that you are not happy with the color match of your WASHLET and toilet. Because the WASHLET is plastic and the toilet is ceramic, sometimes there can be a slight difference in the color shade due to manufacturing process capabilities. Most people will not even notice this difference, but sometimes certain lighting can make it more apparent. If you feel the color difference is extreme, please reach out to us directly for assistance. Our Technical Support team is standing by to take your call. They can be reached at [email protected] or call 1-888-295-8134 between 8am - 8pm Mon - Fri EST and press 4 when prompted. We also have live chat on the TOTO USA website. I hope this helps and thank you for choosing TOTO.
Question:	can I use this to precisely measure from 1-15cm
Answer:	No its 110 volts
Question:	How can i get a datasheet
Answer:	No it cannot
Question:	What would the Range on this be for a 3D Scanner
Answer:	This does not have a premist function.

Product features

Application

• High-speed AF
• Continuous AF for video
• User detection for Personal Computers
• Laptops/Tablets
• Robotics (obstacle detection)
• White goods (hand detection in automatic Faucets, refrigerator

Wire diagram

1, GND Power ground GND

2, VDD power supply positive 3～5V

3, RXD input INPUT serial port input TTL level RXD OUTPUT TTL

4, TXD output OUTPUT serial port output TTL level TXD OUTPUT TTL

5, SDA input/output INPUT/OUTPUT I2C data TTL level I2C DATA I/O TTL

6, SCL output OUTPUT I2C data TTL level I2C CLK OPUTPUT TTL

The Arduino board is connected to the distance sensor, the UART reads the distance data through RXD-TXD, the I2C reads the distance data through A4-A5, the UART reads removes A4-A5, and when the Ardunio code uploads the program, remove the module. Connect after the upload is successful Arduino code UART and I2C each

Product description

Description:

The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.

Ranging measurements are available through the sensor’s I²C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.

PIN Description:

VDD  Regulated 2.8 V output. Almost 150 mA is available to power external components. (If you want to bypass the internal regulator, you can instead use this pin as a 2.8 V input with VIN disconnected.)

VIN  This is the main 2.6 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I2C lines high to this level.

GND  The ground (0 V) connection for your power supply. Your I2C control source must also share a common ground with this board.

SDA    Level-shifted I²C data line: HIGH is VIN, LOW is 0 V

SCL      Level-shifted I²C clock line: HIGH is VIN, LOW is 0 V

XSHUT    This pin is an active-low shutdown input; the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. This input is not level-shifted. 

 Package includes : 

 2x L53L0X Time-of-Flight Distance Sensor

• 1.The VL53L0X from ST Microelectronics is a time-of-flight ranging system integrated into a compact module. This board is a carrier for the VL53L0X, so we recommend careful reading of the VL53L0X datasheet (1MB pdf) before using this product.
• 2.The VL53L0 uses ST's FlightSense technology to precisely measure how long it takes for emitted pulses of infrared laser light to reach the nearest object and be reflected back to a detector, so it can be considered a tiny, self-contained lidar system.
• 3.Ranging measurements are available through the sensor's I⊃2;C (TWI) interface, which is also used to configure sensor settings, and the sensor provides two additional pins: a shutdown input and an interrupt output.
• 4.The VL53L0X is a great IC, but its small, leadless, LGA package makes it difficult for the typical student or hobbyist to use. It also operates at a recommended voltage of 2.8 V, which can make interfacing difficult for microcontrollers operating at 3.3 V or 5 V. Our breakout board addresses these issues, making it easier to get started using the sensor, while keeping the overall size as small as possible.
• 5.A time-of-flight ranging system integrated into a compact module

User questions & answers

Question:	Description mentions vdd pin, but no such pin in product pic. is this wrong and should be 'gpio1' instead? i'll assume 'vin' should be 'vcc' instead
Answer:	Stop + Seat button.

• ✅Accurate & Reliable Results - Take advantage of unique dual laser tube structure, it could effectively reduce the error caused by the heat which continuous measurement introduced. And upgrade with real-time electronic angle sensor, can be more intuitive and easier to find the horizontal direction compared to bubble levels. The high precision laser head component accuracy ups to ±1/16inch, can be measured quickly and accurately in 0.5s with one button operation, measuring distance up to 229 ft
• ✅Portable & Convenient Design - This laser tape measure fits comfortably in hand and easily in pocket; Large backlit LCD display offers easy and convenient viewing, even in dark areas; Mute setting allows you turn on or off the measure beep at your will, suitable for using in library, classroom and other quite places; Auto shut down after 180s without any operation to save power, can work up to 5000 times
• ✅Multiple Measurement Modes - Capable to measure area, distance, volume, continuous measurement, addition, subtraction and indirect Pythagorean measurement. Auto-Level: Only measure the hypotenuse, the horizontal distance, vertical height, and angle will be calculated automatically; Auto-height: Only measure 2 hypotenuses, the vertical height, and angle will be calculated automatically; 20 groups data memory; Manually delete data; Free switch measurement unit Meter- Inch-Feet
• ✅Widely Used & Ideal Gift - Accurate and effortless, effectively makes your work become easier. Mileseey D5 lazer measurement tool is ideal for home decoration, especially in large areas such as apartments, buildings, real estates, factories, warehouses, construction and industries. This is perfect for anyone working on projects by themselves. It's also a perfect gift for anyone that is into DIY
• ✅Package Contents - Mileseey D5 Laser Measuring Device 229Ft; AAA Batteries; User Manual; Portable Bag; Hand Strap; Package Box;

Product features

MILESEEY upgraded electric angle sensor 70M LASER DISTANCE METER

Pocket-sized for easy portability, this handy tool offers length, area, volume and Pythagora measurements in metric,inches, and feet units.

Technical Specifications:

• Measuring range: 0.16m - 70 m
• Measuring accuracy: ± 2mm
• Measuring speed: < 0.5 Seconds
• Measuring units: Ft/M/In/ft+in
• IP54 Dust & Splash Proof
• Laser>
• Laser type: 635 nm <1mW
• Certification:CE/FCC/ROHS/FDA/WEEE certification
• Power supply: 2 x 1.5V (AAA) batteries(Included)
• Automatic switch-off: 180S to save battery
• Battery life: Up to 5000 measurements

Easy to use and Smart Laser measure device 70M

Only the laser rangefinder with built-in electrical angle sensor can have these additional useful measurement functions:

• Auto level: Only measure the hypotenuse, the horizontal distance and vertical height are calculated automatically.
• Auto height: Measure only 2 hypotenuses. The vertical height is calculated automatically. Fast measurement: Automatic calculation of area and volume with just one button
• Compared to the bubble level, It is very more accurate and easier to use

Laser rangefinder with multiple measurements

More memory with 20 sets of data storage

Laser distance measure can store up to 20 sets of data and retrieve historical data at any time.

IP54 (splash proof & dust proof)

IP54 Splash proof and dust proof function protect the laser distance measure in different user environment.

Durable PP+ABS Material & ANTI-SLIP DESIGN

PP+ABS cover works as high-density, anti-slip and anti-fall material provides a preminum quality.

Shockproof, a durable measurement gadget for you

• 📷CAMERA WITH 2X/4X ZOOM: This laser measure adopted a point finder camera with 2X/4X adjustable zoom, allowing you to target the destination point precisely with the crosshair in the display, even when working in areas with restricted visibility or outdoor situations. It also has IP65 water protection with a dust tight design that can withstand the harsh working environment. (To use it outdoors, please make sure it is not under direct sunlight)
• 📷TRIPLE POWER TECHNOLOGY: The laser distance measure can be powered by the included 3 rechargeable Ni-MH batteries (can be replaced by other types of rechargeable batteries) or 3 AAA alkaline batteries. Similar to your mobile phone, the USB port ensures the fast charging of the rechargeable batteries. In addition, the laser tool can be directly connected to the power supply for use. Triple power technology delivers remarkable runtime for all-day jobs.
• 📷WIDE APPLICATIONS: The laser distance meter measures long range up to 656Ft with 1/13-inch accuracy. It provides 17 measurement modes, including length, area (square/triangle/circular), volume (cuboid/cylinder), 3 Pythagoras, indirect length/height, 3D point to point, 2 trapezium, Stake Out, add/subtract and continuous measurement. The distance measure is ideal for home, construction and industries, especially in large areas such as rooms, apartments, buildings, factories, warehouses, etc.
• 📷MULTIPLE PRACTICAL FUNCTIONS: The laser measure features a handy pocket-size design to fit in any pocket. A built-in inclinometer determines the angle of pitch and a digital bubble level to confirm if the tool is level. Up to 1000 historical records can be stored. It also has more practical features like rotating backlit color display, 180s auto switch-off, m/ft/in/ft+in unit, time delay measurement, self-calibration, 3 reference point and 1/4-inch tripod mounting thread.
• 📷VALUE-ADDED FEATURES: Stake Out feature helps you save time and boost accuracy when setting out and marking positions for stud framing or other stake-outs. All the six surfaces of the meter can be laid flat on the surface plus the digital horizontal bubble makes the meter have the simple function of a level ruler. 3D Measuring (Point to Point) can indirectly measure the distance between any two points. This is a revolutionary feature, which is effective and optimizes your workflow.

User questions & answers

Question:	How long is the warranty
Answer:	Thanks for your question, our this laser distance meters have Single Distance, Continuous, Area, volume, Pythagorean(2-point)(3-point), Auto level height measurement, Add/Subsract.
Question:	Will this only work with the joyplan app or are there other apps that it works with as well
Answer:	Our laser measurement tool freely switch the units in In/M/Ft/Ft+In, and laser measure distance up to 229Ft. It provides real time measurement. It will real-time display the data when measuring, very quick, accurate and efficient
Question:	Is this made in China
Answer:	MiLESEEY laser measure can freely switch the units to In/M/Ft/Ft+In according to your need. When you switch unit to inches, our laser distance measure will display inches + fractions
Question:	does this laser have an offset function
Answer:	Not on the D2, 1/32" is the what it rounds to in fraction mode. The E7500i is the next model up with Bluetooth that can round to 1/32",1/16",1/8", or 1/4". The E7400x will also round to these fractions but it is not Bluetooth capable.

Product features

Huepar Laser Measure with Camera LM200C is ideal for home, construction and industries.

Huepar LM200C Laser Measure Specifications:

• Measuring Range: 0.05~200m / 0.16~656ft
• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW
• Laser Wavelength: 630-670nm
• Measuring Accuracy (Typical): ± 2.0mm / ± 1/13 inch
• Tilt-Sensor Accuracy (Typical): ± 0.3°
• Memory: 1000 Sets
• Angle range: ± 90°
• Measuring Reference: Top/Tripod/Rear

Camera with Adjustable 2X /4X Zoom

• This laser measure uses a point finder camera with 2X/4X adjustable zoom, allowing you to target the destination point precisely with the crosshair in the display, even when working in areas with restricted visibility or outdoor situations.

Angle, Leveling & Rotating Display

• The built-in inclinometer determines the angle of pitch and the digital bubble level to confirm when the tool is level, which is excellent for leveling applications as well as inclination measurement.
• The rotatable display can be switched on/off freely, which allows you to read the screen from any angle for a better user experience.

Basic Practical Functions

• The memory function is perfect for recalling the last 1000 measurements, ensuring your most data is available at any time.
• There are four units to choose from: meter, feet, inch, feet+inch.
• The laser meter allows for adding and subtracting distance/area/volume, so you can work out unusual shapes.

Versatile Measurements

• When setting out and marking positions for stud framing or other stake-outs, Stake Out feature helps you save time and boost accuracy.
• The Trapezium Function is useful for determining the length and slope of a roof section, and the area it covers.
• The meter uses the internal tilt sensor to calculate the angle and the distance between the shots, which means you can measure roofs more accurate from the ground.
• Besides measuring the volume of the cube, the meter also has the function of measuring the volume of the cylinder.

Indirect Distance Measurement

• 3D Measuring (Point to Point)-measuring the distance to point 1 and then to point 2 and the distance between the two points will be displayed on the meter. This is a revolutionary feature, which is effective and optimises your workflow.
• With the Pythagoras and indirect length/height function, you can easily execute indirect measurements of height & length such as measuring the height of a multi-storey building with no direct sight or obstacle in the way or even the measurements between 2 to 3 points.

3 Measurement Reference Points

• Depending on the use, three measurement reference points can be selected: front end, rear end, and 1/4 inch screw hole.
• Since there is a 1/4 inch camera standard screw hole, it can be measured more accurately by attaching it to a tripod if there is a risk of errors due to device shake.
• It can be very useful when measuring in Indirect measurement mode.

Value-Added Features

• The special feature of delay measurement is to reduce the error caused by device shake.
• During the countdown, the machine will be stabilized to make the measurements more accurate.
• The Bluetooth feature of this laser measure allows data to be simply and conveniently transferred to the Joyplan app where you can process it later on.
• The measured data can also be used directly on site to establish a layout – for quick and simple documentation of your data.

• ⭐BUILT-IN LI-ION BATTERY & ELECTRIC ANGULAR SENSOR: Powered by a large-capacity Li-ion battery, Huepar laser measure offers remarkable run time for all-day jobs and can work up to 8000 times when fully charged. There is no need to replace the battery frequently making your work more efficiently. Equipped with electronic angular sensor, laser distance meter delivers higher accuracy and faster angle measurements compared to bubble level meters.
• ⭐MULTIPLE MEASUREMENT MODES: This laser distance measure delivers angle, area, distance, volume, Pythagorean measurement modes. Featuring continuous measurement, addition and subtraction, calibration, automatic calculation of area and &volume and 30 groups data memory function, it is ideal for home and construction or industries applications.
• ⭐HIGH ACCURACY & UNIT SWITCHABLE: Huepar distance measure features long-range measuring with extreme accuracy and can measures distances up to 165-feet within 1/16-inch. The tool can measure from front/middle/rear reference points making it easy to measure in different scenarios. All measurements are displayed in real time and can be switchable among M/In/Ft freely.
• ⭐BACKLIT LCD AND MUTE SETTING: Large backlight screen provides users with a better visibility in low-light or no-light working conditions. Automatic shutdown without operation 150s.Mute setting allows users to adjust the volume freely which is suitable for using in library, classroom and other quiet places.
• ⭐DURABLE ROBUST DESIGN: Huepar laser distance measure is IP54 rated to withstand tough working environments. It features small dimensions and a handy pocket-size design so this laser measure can fit in any pocket. 1/4" inch threaded mount enables it to be attached to tripod or other tools for use. Package Contents: 1 x Laser Distance Meter, 1 x User Manual, 1 x Hand Strap, 1 x USB cable

User questions & answers

Question:	What is the effective usable range in sunny outdoor environments
Answer:	No- this is just a distance measure. For straight lines you want to look for a laser LEVEL.
Question:	Are there functional differences between the lm50a, lm100a, and lm120a besides range
Answer:	Hello, The Measurement accuracy is ±1mm, thanks!
Question:	Is the rechargeable battery replaceable, if it fails, or is it soldered in place "permanent
Answer:	The model of this product is LV66U.
Question:	What is the laser beam itself green or red
Answer:	Dear Amazon Customer, as shown in the figure, The exact maximum possible straight distance could be measured with this device is about 328 ft (99.9974m). Best Wishes for You and Your Family

Product features

LM100A Laser Distance Measure Specifications:

• Laser>
• Special Features：Electronic angle sensor
• Power source: 3.7V 850mAh lithium battery
• Measuring accuracy: ±1/16 inch
• Angle range: ±90°
• Working range: 330Ft
• Max storage: 30 units
• Display Style: Backlit LCD
• Measuring units: M/In/Ft
• Laser type: 635nm
• Automatically cut off laser: 20s & Automatic shutdown: 150s
• Dimension: 4.5 x 2 x 1 inch
• Plug Profile: 1/4"-20
• Recharge : USB Charging

WARNING: Avoid direct exposure of the laser beam to the eyes.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM100A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Electronic Angle Sensor& Mute Setting

• With built-in Electronic Angular Sensor device, Huepar LM100A laser measuring displays the data in real time when measuring.
• Compared to Bubble Levels, it can be more intuitive and easier to find the horizontal direction, and can work better in different conditions, faster and more accurate.
• Mute setting enable users to adjust the volume freely while measuring in some quiet places like library,>

Various Reference Points & Manual-calibration

• The tool can measure from three different reference points (the front, the middle and the rear of the device), making it easy to measure in different scenarios.
• Calibration function provides more accurate measurement.

Multiple Functions

• Max &Min values measurement.
• Automatic calculation of area and volume.
• 30 groups data memory; Manually delete unwanted data.
• Change unit among M/In/Ft freely according to your needs. The default unit is meter.
• User can use the addition/subtraction function to sum up the length/area/volume of several surfaces.

Waterproof & Dust-proof

• Featuring IP54 waterproof protects the laser distance measure to the maximum extent, under various working conditions.

Package Contents:

• 1 x Huepar Laser Measure
• 1 x User Manual
• 1 x Hand Strap
• 1 x USB cable
• 1 x Reflector

Product description

Rated Power: <1mW Laser Wavelength: 620-670nm Laser Class: 2

• [GOING THE DISTANCE] – Measure distances with the accuracy of ±5/64in (2mm) up to distances 196Ft/60m. Measures Inches, Feet & Meters. Takes both fraction & decimal measurements in In/Ft mode.
• [AREA, VOLUME, PYTHAGOREAN, & ADVANCED DISTANCE FUNCTIONS] – Supports area measurements of triangular, square & trapezoidal shapes. Calculate volume of cubic spaces and measure the distance between 2 distant horizontal points. Supports addition & subtraction of measurements.
• [DIGITIAL LEVEL & ANGLE SENSOR w/ 50 DATA SET STORAGE] – Take more precise area and volume calculations w/ the integrated digital level & angle sensor. Features backlight & 50 data set storage.
• [GET MESURING] – Includes Carrying & Storage Pouch w/ Belt Loop, Lanyard and 2x AAA batteries.
• [2-YEAR WARRANTY & EXTENDED WARRANY] – Protected by USA-Based support, right here in Atlanta, Georgia.

Product features

Digital Level / Bi-Directional Angle Finder & Gauge - Experience True Level

• No more guessing if you’re precisely angled at 90° with traditional bubble levels.
• Provides X & Y axis degree measurements, allowing the user to know if its flush on measurement surface

Triple Measurement Reference Points

• Get an additional measurement point for small and tight spaces.
• Added flip-out nano measurement point makes it easy to make measurements from the tightest spaces.
• This added measurement point coupled with traditional front and rear reference points covers all your measurement needs.

Multiple Units of Measurements w/ Fractions

• Take and convert measurements to the following units
  • Inches
    • Features decimal & fraction
  • Feet
    • Features decimal & fraction
  • Meters
• Features 5-Line Backlit LCD Display
  • Shows more details than cheaper laser distance measure
• Audible Alerts
  • Lets the user know when measurement is taken

Advanced Pythagorean, Area, Volume & Indirect Distance Measurements

• Effortlessly find the measurements and data you need to get the job done.
  • Area: Rectangular, Triangular, Trapezoidal & Cumulative area measurements
  • Volume: Cubic
  • Pythagorean: Traditional Pythagorean Calculations, Dual Pythagorean (Allows addition and subtraction of triangular area measurements)
• Indirect Point Distance: Measure the horizontal distance between two distant points

50 Data Set Storage

• Store up 50 sets of measurement data
• Allows for quick and easy reference
• Makes material purchases & trips to the home improvement store much easier

Ready for the Elements: Dust & Water Resistant

• Dust-Resistant Designed for use in dusty environments
• Water-Resistant Works like champ with water and moisture exposure

Technical Details - What's in the Box!

Technical Specifications

• Measuring Range: .16 to 196ft (.05-60m)
• Accuracy: ±1/16 in (2mm)
• Laser Specifications: Class II <1mW, Wavelength: 620-670nm, Laser Auto-off: 20 Seconds
• Automatic Level & Angle Finder Calibration

What's Included:

1. 196ft Laser Distance Measure w/ Angle Finder
2. Carrying Pouch w/ Belt Loop Lanyard
3. 2x AAA Batteries
4. Quick Start Guide

Experienced & Knowledgeable USA-Based Support

• Rest assured knowing your tool backpack is ready for the job tomorrow and the job 10 years from now
• Quick, responsive support based right here in Atlanta, Georgia
• Phone: 1 (866) 608-5170
• E-Mail: s u p p o r t @ m o t o r h e a d t o o l s . c o m

Accomplish Anything - MOTOHEAD 20V ULTRA Family of Power Tools

• Rugged & Reliable All-Metal Transmissions & Gearing Standard
  • All MOTORHEAD 20V ULTRA Power Tools feature 100% all metal transmissions and gearing for ultimate tool longevity and performance. Never worry about your tools slipping or failing under heavier loads.
• Ultimate In-Class Value
  • Premium features, Rivals the Pros – Laser guides, LED lights, rugged non-slip shock & scratch-resistant DURAGRIP OVERMOLD construction with all the core mission-critical accessories standard with every tool
• Ample Venting & Thermal Management Technology
  • MOTORHEAD Tools are all designed for prolonged use without significant detrimental overheating and safety shutoffs Get more done without waiting around for a tool to cool or reset after overheating or shutting off
  • Even with this extra durability, know every MOTORHEAD 20V ULTRA power tool is still protected by comprehensive smart heat and power management sensors
• 8+ Power Tools & Growing: Comprehensive Core Power Tool Selection
  • All Powered by the shared MOTORHEAD 20V ULTRA Lithium-Ion Power Tool Battery Ecosystem - Swap & Share Batteries Across All Power Tools
    • Drills - Standard & Hammer
    • Impact Drivers
    • Saws - Reciprocation, Circular & Jig
    • Angle Grinders
    • Oscillating Multi-Tools

• ✔️BUILT-IN LI-ION BATTERY & ELECTRIC ANGULAR SENSOR: Powered by a large-capacity Li-ion battery, Huepar laser measure offers remarkable runtime for all-day jobs and can work up to 8000 times when fully charged. There is no need to replace the battery frequently making your work more efficiently. Equipped with electronic angular sensor, laser distance meter delivers higher accuracy and faster angle measurements compared to bubble level meters.
• ✔️MULTIPLE MEASUREMENT MODES: This laser distance measure delivers angle, area, distance, volume, Pythagorean measurement modes. Featuring continuous measurement, addition and subtraction, calibration, automatic calculation of area and &volume and 30 groups data memory function, it is ideal for home and construction or industries applications.
• ✔️HIGH ACCURACY & UNIT SWITCHABLE: Huepar distance measure features long-range measuring with extreme accuracy and can measures distances up to 393-feet within 1/16-inch. The tool can measure from front/middle/rear reference points making it easy to measure in different scenarios. All measurements are displayed in real time and can be switchable among M/In/Ft freely.
• ✔️BACKLIT LCD AND MUTE SETTING: Large backlight screen provides users with a better visibility in low-light or no-light working conditions. Automatic shutdown without operation 150s.Mute setting allows users to adjust the volume freely which is suitable for using in library, classroom and other quiet places.
• ✔️DURABLE ROBUST DESIGN: Huepar laser distance measure is IP54 rated to withstand tough working environments. It features small dimensions and a handy pocket-size design so this laser measure can fit in any pocket. 1/4" inch threaded mount enables it to be attached to tripod or other tools for use. Package Contents: 1 x Laser Distance Meter, 1 x User Manual, 1 x Hand Strap, 1 x USB cable

User questions & answers

Question:	Can you use this to find a 90 degree angle
Answer:	Hello, the customize password can not include special character / or " or `. You can remove these three character in your password and I'm sure you will get it works.
Question:	How do i change it from in to ft
Answer:	Hi, I suppose your phone is Android system, please kindly note this wifi range extender has compatibility issue with some browsers on Android phones in setting process, so we recommend using Apple or Windows system devices to set the repeater, or you can contact support team via the email on the manual.
Question:	What is the minimum measuring distance
Answer:	For setting up method you can reference the product detail page, we illustrate the process by images step by step even more clearly than user manual. We recommend using iPhone or Windows devices to set the repeater. At step 5 you can set the repeater WiFi name same with your router WiFi.
Question:	Can it express inch in fractions (e.g. 159 and 11/16") or decimals (e.g. 159.6875")? Which display format can it do
Answer:	Yes I own 2 of these; the power supply for the unit is 5VDC. I use 2 different methods to supply that 5 VDC power: One unit is connected via the power supply block that comes with it. The other unit I connect to 5 VDC directly through a powered (5 VDC) USB port. In fact that is why I selected this unit! I knew that I could not reach a 110 VAC power wall socket but I had access to a powered USB hub. Devices that are powered by 5 VDC are preferred for another reason. They are likely to use less power and why not save energy if you can?

Product features

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Multiple Measurement Methods

• Huepar digital laser distance meter supports various measuring modes including distance, area, volume and Pythagoras measurement.
• LM120A is perfect to use in hard-to-reach areas and outdoors with its IP54 waterproof rating. It is also widely applicable to industrial, commercial and home use.

Electronic Angle Sensor& Mute Setting

• With built-in Electronic Angular Sensor device, Huepar LM120A laser measuring displays the data in real time when measuring.
• Compared to Bubble Levels, it can be more intuitive and easier to find the horizontal direction, and can work better in different conditions, faster and more accurate.
• Mute setting enable users to adjust the volume freely while measuring in some quiet places like library,>

Various Reference Points & Manual-calibration

• The tool can measure from three different reference points (the front, the middle and the rear of the device), making it easy to measure in different scenarios.
• Calibration function provides more accurate measurement.

Multiple Functions

• Max &Min values measurement
• Automatic calculation of area and volume
• 30 groups data memory; Manually delete unwanted data
• Change unit among M/In/Ft freely according to your needs. The default unit is meter.
• User can use the addition/subtraction function to sum up the length/area/volume of several surfaces.

Waterproof & Dust-proof

• Featuring IP54 waterproof protects the laser distance measure to the maximum extent, under various working conditions.

Package Contents:

• 1 x Huepar Laser Measure
• 1 x User Manual
• 1 x Portable Bag
• 1 x Hand Strap
• 1 x USB cable
• 1 x Reflector

Product description

Https://drive.google.com/file/d/1aRoinCV7_25hi0UJyxVqC8m78gVVPpkd/view?usp=sharing.TOF050F ranging sensor is a laser ranging module designed and manufactured based on VL6180, which provides

accurate and repeatable short-distance measurement function. Thanks to the highly integrated infrared transmitting

and receiving mechanism and ST's innovative Flight-Sense technology, faster and more accurate distance

measurement and higher ambient light immunity can be achieved. TOF050F supports serial port mode, serial port

simulation Modbus mode, and IIC mode at the same time, which is well adapted to various application scenarios. It is

equipped with a host computer for easy debugging. TOF050F has a range of up to 50cm, and can choose high-precision or long-distance test mode according to needs, making it more flexible.



Parameter:

Model: TOF050F

Ranging chip: VL6180

Measuring distance: 50CM (Max)

Measurement dead zone: 0-2CM

Measurement Mode (Range):

1. High precision, 200mm

2. Middle distance, 400mm

3. Long distance, 500mm

Infrared emission mechanism: 850nm

FOV: 25°

Communication mode: UART / Modbus / IIC

Development routines / software: Arduino Demo / STM32 Demo / Raspberry Pi Demo / Host computer / Serial commad

Operating Volage: 3.0V-5V(DC)

Operating Current: 40mA(Max)

Operating temperature: -20℃-70℃

Storeage temperature: -20℃-80℃

Volume: 18mmX17mmX6mm(L*W*H)

Fixing hole d=2mm, Spacing14/11mm

Weight: 3g



What you will get:

1 * 50CM Laser Distance Sensor TOF050F

• This is a safe linear measurement laser distance sensor module: 850nm laser meets the Class 1 operating conditions specified in the third edition of IEC 60825-1: 2014; Provides various demonstrations such as Ar duino, STM32, Raspberry Pi, etc. You can download from Get the link in the product description.
• 50CM Single Point Ranging Detector Lidar Module Suitable for Indoor: The maximum measurement distance indoors can reach 0.5 meters, the accuracy is within 5%; The measurement range has nothing to do with the reflectivity of the target bject
• TOF IR Distance Sensor: Can work in high infrared light environment; High optical crosstalk compensation; No need for additional optics
• DIY Home Dmart Meter Sensor Derector Assistant, with Multiple Output Modes: Serial port mode (default);Modbus protocol mode;IIC. Standard TTL level serial port I2C; Single power supply; Measurement time is less than 30ms
• A Variety of Application, You can Easily Choose: High-speed autofocus; Video continuous auto focus; User detection of computers and other equipment; Obstacle detection; Automatic gesture recognition of white goods (such as faucets, refrigerators, etc.)

• 【Green Laser Measure】:Mileseey Laser Measuring Device upgraded the red laser beam to a green laser beam. more brighter, Easy to see and measure, Ideal for thanksgiving gifts and Christmas gifts for family and friends. Laser class: Class 2 , Laser type: 490-560nm, <1mW
• 【High accuracy】:Laser distance measure Build-in digital tilt sensor allows for advances features Real-time angle display, Provides real time measurement, Accuracy ±(2mm+5x10-5D), measuring distance extends to 229 feet. This Laser Distance Meter can give accurate measurement in 0.5 seconds
• 【Multiple Measurement Features】:Our laser measurement tool have Area, distance, length, volume, continuous measurement, Pythagorean(2-point)(3-point), Auto level, height, Multiple measuring modes. It will real-time display the data when measuring, very quick, accurate and efficient
• 【Simple Operation & Easy to use】:Large backlight screen provides you with a better visibility in dark areas. Place laser measure on one end of what you want to measure, then aim the laser beam so that it hits an object at the other end, press button once to begin measuring, and you can also change the Measurement modes by one click
• 【IP65 protection class】:Durable and handy, waterproof and dust-proof protect the distance meter to the maximum extent, Portable size and Scratch-proof TPE soft rubber body provide a good Grip feel Experience

User questions & answers

Question:	Does this do point to point measurements
Answer:	Don't know about the pole - but I don't see why not though with 72" pole, it has to be really sturdy (and doesn't bend).
Question:	does it measure 1/16 in inches only dont need feet or meters
Answer:	No, you can not use D2 to measure water, glass
Question:	does it show fractions of an inch ( like 3/16 ) , or just decimals
Answer:	The D2 can take measurements in feet, inches, and meters.
Question:	How do you change from 1/32 to 1/16 to be your smallest measuring unit on Bluetooth Disto D
Answer:	Most definitely, the E7500i can do everything the E7400x can do and then some. It is a much better unit with a built-in viewfinder.
Question:	Does it work with the hilti pd 72 extention pole
Answer:	you might be able to get the D810 or the S910 to connect to a windows phone like a bluetooth keyboard. Then it would just "type" in the dimensions as you take them. Then you would use it in any app that you can use a keyboard for. As far as a dedicated app as far as I know there isn't one.
Question:	Can the D2 tell me how far down the water level is from the top of my well...for ex, actual well 250 ft deep; water is 20 - 40 ft deep in the well
Answer:	Yes it is. I am an authorized dealer for Leica.
Question:	Can it change measurement unit from inch,yard to meter,kilometer
Answer:	Definitely a problem at distances over 15-20 feet. It depends on what color target you are using, and colored glasses can help. I was using mine recently to sight and measure distances in a track event from 70+ feet back of the target. I could not pick out the dot at that distance so I just used the camera with its crosshairs for every measurement (at 4X magnification). Problem solved.

Product features

Leica DISTO D1

Our newest addition to the simple, yet powerful DISTO lineup. The Leica DISTO D1 provides easy point and shoot measurements with the ability to send those measurements through Bluetooth into our free DISTO Sketch app along with many other time saving apps.

*DISTO Sketch app available for iOS & Android devices.

Leica DISTO E7100i

With slim and sleek features, the Leica DISTO E7100i offers the ability to take straight line measurements, along with area calculations to greatly improve your measuring workflow. With a convenient removable pocket clip, this unit is easy to carry at all times. This unit also allows the Bluetooth transfer of your measurements into our free DISTO Sketch app along with many other time savings apps.

*DISTO Sketch app available for iOS & Android devices.

Leica DISTO D2 New

With our new spin on a timeless classic, the Leica DISTO D2 New with Bluetooth offers improved functionality over it's former glory. Offering many functions like area, volume, two and three point Pythagoras, add/subtract, count-down timer, and intelligent endpiece, the DISTO D2 New is a powerful tool in a compact, handheld device. In addition to these great features this unit allows the measurements to be transferred into our free Leica DISTO Sketch app and many other apps through Bluetooth.

*DISTO Sketch app available for iOS & Android devices.