3 best intersect laser levels

• FULL ROOM LAYOUT LASER LEVEL: The Firecore 94T-XG 3x360 ° line laser projects one horizontal plane and two vertical planes can rotate through a full 360 degrees to cover the floor, wall, ceiling all around the room. Laser lines intersect at 90 degrees to provide completely square angles on all surfaces. This 360 laser level is both a complete level as well as an alignment laser aids in full room layout.
• GREEN LASER LINES FOR OPTIMAL VISIBILITY: This laser level projects green laser beam which is 4X brightness than standard red beams with a working range up to 82 ft. with an accuracy of ± 1/8" at 30 ft. The 94T-XG line laser offers pulse mode to extend the working range up to 165 ft. with Firecore FD20 Laser Receiver in bright lighting or outdoor conditions. Class II laser product (IEC/EN60825-1/2014), <1mW power output.
• MULTIFUNCTIONAL GREEN LASER TOOL: The Smart Pendulum System allow this laser tool self levels and indicates out-of-level condition up to ±4°. Locking pendulum helps prevent damage to internal components. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. In addition, the laser tool has the anti-shake mode for different jobsite construction.
• TOUGH DESIGN AND LONG LASTING BATTERIES: Overmolded housing and IP65 water/debris resistance ensures you work well in tough working conditions. The laser tool is covered by TPR soft rubber, which delivers soft touch and stronger protection for Anti-Drop. The 94T-XG equipped two large capacity lithium batteries and each battery provides up to 10 hours of running time. In addition, this laser tool delivers extra AA battery holder for 4 AA alkaline batteries (batteries not included ).
• DELIVERY AND WARRANTY: The laser tool comes with a portable carry bag bringing much more convenient to carry and store. Package includes Line Laser, Two Li-ion batteries, Magnetic Pivoting Base, Li-ion Battery Charger, Power adapter, Laser Target plate, AA Battery Holder, User manual.12 months limited warranty up to 24 months if become a royal member through product registration.

Product features

Firecore F94T-XG 3x360° Green Laser Level Specifications:

• Laser Class: Class 2 (IEC/EN60825-1/2014), <1mW power output
• Laser Wavelength: 505-520nm
• Number of Lines & Range: 12 lines, 3× 360°
• Horizontal/Vertical Accuracy: ±1/8-Inch at 30 ft.
• Leveling/Compensation Range: ±4°
• Leveling time, typical: ≤3 s
• IP Rating: IP65 water/debris resistance and shockproof, reliable and tough
• Power Source: 7.4V / 2600mAh Li-ion Battery & 4×˝AA˝ (LR6) batteries
• Working Distance (Line): 82 ft. With Firecore Laser Receiver extend to 165 ft.
• Operating Time with Lithium Battery: 10 hours with all laser beams on
• Mount Size: 1/4"-20
• Operation Temperature Range: Between -10℃ and +40℃
• Storage Temperature Range: Between -20℃ and +60℃

3 x 360° Multiple Line Switching Functions

• The three laser lines can be selected individually depends on job site applications.
• Short press operation button to switch the laser line combinations in turn.
• The leveling laser generates three green-beam laser chalk lines in 360° laser planes – one horizontal and two vertical,so that users can accurately and quickly execute level, align, square and plumb applications.

3 x 360° Multiple Line Switching Functions

• The three laser lines can be selected individually depends on job site applications.
• Short press operation button to switch the laser line combinations in turn.
• The leveling laser generates three green-beam laser chalk lines in 360° laser planes – one horizontal and two vertical,so that users can accurately and quickly execute level, align, square and plumb applications.

3 x 360° Multiple Line Switching Functions

• The three laser lines can be selected individually depends on job site applications.
• Short press operation button to switch the laser line combinations in turn.
• The leveling laser generates three green-beam laser chalk lines in 360° laser planes – one horizontal and two vertical,so that users can accurately and quickly execute level, align, square and plumb applications.

3 x 360° Multiple Line Switching Functions

• The three laser lines can be selected individually depends on job site applications.
• Short press operation button to switch the laser line combinations in turn.
• The leveling laser generates three green-beam laser chalk lines in 360° laser planes – one horizontal and two vertical,so that users can accurately and quickly execute level, align, square and plumb applications.

Self-leveling Mode & Manual Mode

• Self-leveling Mode: After turning on the laser power, switch the power and press the operation key to select the laser beam mode. When the inclination angle of the instrument exceeds 4º, the laser ray will flash quickly so that whether the locating place of the instrument is even or not can be detected. If the locating place of the instrument is uneven, the laser ray will flash and fail to be in normal operation.

• Manual mode: Off state, press and hold the H key for 3 seconds until the laser ray appears, and after releasing the operation key, you can continue to operate to select the laser beam. After selecting the slope mode, The laser line is inclined, and when the inclination angle of the instrument exceeds 4º, the instrument will flash slowly and can be operated at the angle you choose.

• Anti-shake Mode: Turn on, press and hold the V button for 3-5 seconds, the red light flashes 3 times until stops flashing and then enter the anti-shock mode. At this time, if the machine is tilted, the laser line will not light up no matter what button is clicked, if turn off the power to turn off the anti-shake mode

Outdoor Pulse Mode

• Turn ON pulse mode: Press the "Receiver" button, the straight laser line stops flashing and then enters the pulse mode.
• Secondly, turn on the receiver and search the laser lines. When the receiver detects the laser lines, it will make "Beep" sounds. it can turn off the sound.
• Pulse mode extends the working range up to 165 ft. in brighter working conditions when using with Firecore Line Laser Receiver.

Dual Power Methods

• This laser tool comes with an holder for installing four AA alkaline batteries for using the tool.
• This green laser tool offers two large capacity rechargeable Li-ion batteries (7.4V-2600mAH/ Li-ion Battery) for extended runtime.

Easy Operation

• Soft Rubber Protection Cover: The soft rubber protection cover can protect the laser window from damage caused by falling.
• Green Laser Target Plate: Increases the visibility of the laser beam.
• 360° Strong Magnetic Pivoting Base: Allows being adsorbed onto metal track and steel. The base provides 360° free rotation to meet different angles required in many jobsite.
• 1/4"-20 female thread on the laser level and can help to mount it to the laser tripod or laser mounting pole.

Green Beam Laser

• This cross line laser adopts the bright Osram’s green laser unit, which is resistant to temperature changes and has higher stability, with a working range up to 82 ft. of accuracy within ±1/8 In. at 30 ft.
• The human eye naturally detects the colour green more ealily and by offering green laser technology, the Firecore 94T-XG offers enhanced visibility and range in long range interior applications and exterior applications when to compared to traditional red laser.

High Precision

The distance between the luminous points on both sides and the outer cover has very small spacing to ensure higher precision in tiling construction.

More Installation Methods

• This laser level is great for various leveling and layout applications.
• One 360°horizontal and two 360°vertical planes enable users to cover the floor, wall, ceiling all around the room.
• The line laser tool can work with Fireocre multiple accessories such as FM80 multi-function magnetic bracket adapter, FS124 telescoping pole and 502D Aluminum Alloy laser tripod(Not Included in the Package), which makes job much easier.

• ▲SMART SELF-LEVELING AND MANUAL MODE: Unlock the pendulum function by sliding the side switch to on, if the tilt angle is ≤ 4 °, the laser level will automatically level for horizontal/vertical/cross line, otherwise the laser will flash to indicate out-of-level condition. Press the switch to off, start manual mode, lock lines to fixed angles for alignment.
• ▲3 IN 1 LEVEL LASER AND HANDY TO USE- HYCHIKA laser level offers 3 line patterns-vertical, horizontal and cross line laser with the maximal laser visibility reaching 50 feet. Compact and lightweight for easy gripping, IP54 protection grade. Equipped with a nylon zippered pouch, can prevent dust for storage and protects the level and L base against impact/scratching
• ▲TWO USING WAYS TO CHOOSE: The laser level can be affixed to most metal surfaces using the magnetic bracket (included) , or mounted onto a tripod of 1/4" size, turning around at 360° freely and projecting laser lines in any position or angle.
• ▲WIDE APPLICATIONS: Adopting advanced laser module of QSI and ARIMA to emit brighter and clearer laser lines. More than 20h lifetime under continuous using with higher precision of ±1/8 of an inch at 30 Ft and lower energy consumption, ideal for paving tiles, installing photo, door, window, or furniture carpentry, hanging wallpaper, construction works, etc.
• ▲PACKAGE CONTENTS: 1 * HYCHIKA Laser Level Tool; 1 * Magnetic L Bracket; 2 * AA Batteries; 1 * Carrying Bag; 1 * User's Manual. 24 Months Promise.

User questions & answers

Question:	When in the manual (locked) mode & tilted more than 4 degrees does it blink/flash or is it maintained solid
Answer:	Hello, Yes, if the laser level is locked, more than 4 degrees, it will blink, the light is red.
Question:	Is this a double sourced laser level
Answer:	Yes, the line laser is a double sourced
Question:	Is this line laser work outdoor
Answer:	This laser level would work indoor, we do not suggest that you use it outdoor.
Question:	Can the laser be easily seen in Outdoor or bright sunlight indoor
Answer:	I bought this to use on indoor projects. Maybe more suitable for indoor use.

Product features

HYCHIKA Laser Level Line Laser with Double Laser Module Measuring Range 15 M

• Dual Laser Module: With advanced dual laser modules of great precision, you can toggle among horizontal/vertical /crossing lines freely.
• Long battery Life: Over 20 hours continuous using time.
• Intelligent Self-leveling: If the Inclination angle ≤4 °, the laser will automatically level.
• Wide Usages: Ideal for aligning floors, doors or windows, laying tiles etc.

Note:

• Never point the laser at yourself, people or animals, or it will hurt their eyes. It may blind or dazzle people.
• Never operate the item in an explosive area or near flammable liquids or gases.
• Remove the batteries if the laser is not used for more than 3 months to prevent the risk of damage due to leaking battery fluid.

DUAL MODULES

Our laser level is produced with dual laser modules that will satisfy your different needs, so you can toggle among vertical & horizontal & crossing lines. In addition, it features higher brightness and lower energy consumption.

3 Measurement Modes

You can alternate among single horizontal, vertical and double cross lines according to your different needs.

Intelligent Self-leveling

Move the button to unlocked position to enter self-leveling function. It self-levels within 4 degrees.

360 Degree Rotation

The laser level rotates 360 ° and can project a red horizontal/ vertical/cross line laser at any position or angle.

Useful and Wide Applications

Adjust the side switch to off position to enter manual mode so you can project laser lines according to multiple scenarios, ideal for paving tiles, installing doors, windows or furniture, hanging wallpaper, etc.

Product description

Specification:

Laser class: Class 2 (IEC/EN60825-1/2014), output power <1mW

Instrument specifications Laser light: 360 degrees x312

Line laser light source: wavelength is 532nm

Green light wavelength is 505mm

Horizontal/vertical accuracy: ±0.2mm/10m

Auto leveling range: ±3

Waterproof rating: IP-54

Working range: about 25m/9.84inch in diameter

Working time: about 8 hours

Green light working temperature: 0C-40℃

Weight: about 1600kg



Packing List:

1*Level

2*Lithium Battery (5800 mAh)

1*Base

1*Upper Wall Shelf

1*Cloth Bag

• ✅ 3x360° Laser Full Layout: One 360° horizontal and two 360° vertical planes allow users to cover the floor, walls and ceiling around the room. Two vertical lines intersect at an angle of 90°, allowing users to quickly present images and arrange them in a square shape. For three plane laser windows, the laser can be placed close to the wall with a minimum distance of 10 mm, which makes it easier and more accurate for users to complete any panel work.
• ✅ Multifunction Laser Tools: The horizontal and vertical 360° laser lines can be switched independently, and you can choose any one you want to work with vertical, horizontal, or two laser lines at the same time. With the help of our intelligent swing system, this laser leveling tool automatically adjusts the level and indicates that the swing exceeds the level when unlocked. After swing lock, switch to manual mode to lock the line for use at any angle.
• ✅ Convenient Charging Function: Even if the battery is removed, you can also directly enter the charging in the workplace. The large-capacity rechargeable lithium battery can be used continuously for 6 hours when all lasers are turned on. This laser also provides 1/4"-20 and 5/8"-11 mounting threads, which can be temporarily fixed in place or fixed on a tripod.
• ✅ Green Laser and Outdoor Thrust Mode: The green laser projected horizontally by this laser is 4 times brighter than the standard red beam; with a working range of up to 130 feet (approximately 91.4 meters) and an accuracy of +/- 1/9 inches (approximately 1.3 meters).
• ✅ Durable and Waterproof: IP54 waterproof/dustproof level ensure that you work smoothly under dangerous working conditions. The TPR soft rubber provides all-round protection, laser-grade shockproof, wear-resistant and impact-resistant.