14 best smart lighting controls

Product description

Experience the ultimate convenience with the Lutron Caseta wireless dimmer and Pico remote control. The wireless dimmer gives you the ability to set the right light for any activity whether it's reading, watching TV, entertaining, or having a casual dinner. Control your lights in a 3-way application by mounting the Pico remote to the wall with the included Pico wall box bracket, for multi-location dimming. No cutting holes or wiring required! The remote lets you turn lights on/off as well as brighten or dim them. With the Lutron smart bridge and app (sold separately), you can control your caseta wireless dimmers with your smartphone from anywhere. The dimmer works up to 600-watt of incandescent or halogen and 150-watt of dimmable LED or dimmable CFL. Pico takes CR2032 battery, included in remote.

• Works with Alexa to support dimming through voice control (Smart Bridge required, Alexa device and Smart Bridge sold separately)
• Replaces an existing switch and installs in 3 steps in as little as 15 minutes; Ideal dimmer for all homes, as it does not require a neutral wire
• Can control up to 17 bulbsper circuit (based on 8.5 W LED bulbs, 60W incandescent equivalent)
• Tested and recommended for use with over 1, 000 bulbs(for recommended LEDs, please see "Technical Specification")
• Works with up to 150W dimmable LED/CFL or 600W incandescent/halogen bulbs; Not rated for low voltage applications (i.e. track or landscape lighting)
• Use included Pico remote to run lights on/off or raise/lower to adjust brightness from anywhere around your home
• For use in multi-location applications, replace existing switch with included Pico remote and wall plate brack (PICO-WBX-ADAPT, sold separately)
• Works with your voice assistant or smart phone via the free Lutron app for iOS and Android (Smart Bridge required)

User questions & answers

Question:	I live in an old house, My switches only have 1wire, the hot. No ground and no neutral in my wall switch boxes. Will this work for me
Answer:	You could use this in conjunction with the Insteon 2475F FanLinc Insteon Dual-Band Ceiling Fan and Light Controller, to controll the light functions. Use your remote to control the fan functions. The switch is of course unnecessary however.
Question:	Can you program 2 remotes to work with one switch? I want one wall mounted and one hand held
Answer:	This item needs to work with an Insteon hub, there is a hub that works with HomeKit. But this is a combination I have not tried.
Question:	Does anyone know if this dimmer works on a three way switch
Answer:	The Smarthome page for the 2466DW says nothing about dual-band. Neither the quickstart guide nor the owners manual say anything about dual-band. The owners manual states, in more than one place, that you need to "make sure you have installed at least two Access Points (#2443) or other dual-band INSTEON products". I think it's pretty certain that this product is NOT dual-band.
Question:	I purchased the Lutron P-PKG1W-WH and my new LED bulbs are flickering when being dimmed. They are dimmable bulbs and I have tried 2 different brands
Answer:	Yes. I have the 2466DW installed in my kitchen in a 3-gang switch box in the center between two other standard Lutron toggle switches. I needed the Insteon as it was the only toggle style dimmer switch compatible with controlling the low-voltage(twicebright CL1220TL) mini-recessed lights that use dimmable LED bulbs above my sink. The switch is high quality and easy to program for the desired on level.

• Voice control: Nitebird smart Led Strip Lights work with Alexa and Google Assistant, free up your hands to turn on /off led strip lights, change colors, adjust brightness
• Music sync: Led lights strip with bulit in sensitive mic, docorate party, color changing, ensure the lights in sync with music beats, great as mood lighting, light up your life
• Schedule: Automatically turn on / off at the time you set, the LED strip lights like an alarm clock to accompany you fall asleep and wake up
• 16 million colors: 5050 RGB LED strip lights can be adjusted to colorful your Bedroom Kitchen Ceiling Party ; 8 customized scenes meet your different needs
• Easy to install: With a stronge self adhesive, the LED strip lights can simply stick to any dry and clean surface, cuttable led light strip can be cut to the most appropriate length

User questions & answers

Question:	Does it works with alexa and google assitant? can it control the brightness and the colors by sending a voice command
Answer:	They should. I ordered them for my daughter thinking they’d fit but they were HUGE on her. She’s only 8...
Question:	Failed to connect to the APP
Answer:	The photo is incorrect. Black/Red is what will be shipped. The photo is being fixed as we speak.
Question:	Are they dimmable
Answer:	Hooks
Question:	Does it support 5GHz Network
Answer:	Yes

Product features

Living Room Lights

Bed Room Lights

Festival Decoration Lights

Gaming Lights

Kitchen Lights

Party Lights

Product description

Expand your control with the GE-branded Enbrighten Add-on Switch with QuickFit and SimpleWire When paired with a GE-branded smart switch or dimmer including Z-Wave and Zigbee controls the hardwired device completes multi-switch systems Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home

• WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations By connecting directly to the smart device the add-on mirrors its functions This feature allows you to dim lights adjust fan speeds turn fixtures ON/OFF and more based on the capabilities of the primary smart device While the add-on switch is not a stand-alone device it provides continued use of your favorite smart-device functions from multiple locations
• ADVANCED DESIGN 2ND-GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for breakoff tabs Quick Fit enhancements are the ideal smart solution for older-style switch boxes multi-gang configurations or any other application with limited space Dual ground ports which are offset to avoid switch box mounting screws support daisy-chaining in multi-switch setups
• ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch dimmer or fan control for full use of home automation features in 3-way configurations For easy installation the add-on switch only requires neutral traveler and ground wires It cannot be used as a standalone switch
• COMMERCIAL AND RESIDENTIAL APPLICATIONS – Supports 120VAC and 277VAC for universal use in a variety of systems The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications Must be paired with a 277VAC smart device – model 43072 or 43074 – for light-commercial use Easily replace any in-wall control in a multi-switch configuration to remotely turn on or off and set programs for a wide range of fixtures
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections NEUTRAL WIRE REQUIRED Includes white and light almond paddles (wallplate not included) Works with LED CFL incandescent and halogen bulbs as well as other fixtures based on the primary device functionality

User questions & answers

Question:	Is it compatible with fibaro
Answer:	Yes. This switch “locks” into the fully off position. It does not lock into the fully on position.
Question:	Does this work with Hubutat
Answer:	Yes, all of our Z-Wave lighting controls can be controlled by Alexa when connected to a Smartthings hub.
Question:	If this switch is paired with a GE 47900, can the 2/3 button press scenes be activated from this switch? Or do the scenes only work from the
Answer:	All Z-Wave devices will require a hub to control them. This includes lighting controls to interact with Google or Alexa. You will need to use the hub's provided app to set up and control the dimmer, then link Google/Alexa with the hub to link them and allow control by voice command through their systems.
Question:	Does this switch allow you to control another switch independently when installed next to the other smart switch
Answer:	The 46203 was completely redesigned from the previous model 14294. That included increased and updated ratings for LED wattage. 46203 = 300 watts LED/CFL and 14294 = 150 watts LED/CFL.

Product features

QuickFit

The revolutionary, space-saving QuickFit design features a rounded housing and 20 percent smaller depth compared to previous models. The elimination of heat tabs also offers a more convenient installation and user-experience without reducing the electrical ratings.

SimpleWire

With the SimpleWire technology, the new add-on switch features dual offset ground ports, which save time, simplify installation and reduce wire congestion in multi-switch setups. Neutral wire required.

Why Add-On?

The add-on switch works with all GE-branded In-Wall Smart Switches, Smart Dimmers and Smart Fan Controls for Z-Wave and Zigbee. It even supports 120V and 277V for residential and light-commercial use. Add a up to five switches to any GE-branded smart control to control lights or devices from multiple locations.

Versatility

Automating your home not only makes your life easier, but it also saves energy, cuts costs, and boosts security. When paired with a GE-branded Smart Switch or Dimmer, including Z-Wave and Zigbee controls, the in-wall device completes multi-switch systems. Compatible with LED, CFL, incandescent and halogen bulbs, and other hardwired fixtures.

Personalize

Changeable paddles in a variety of colors, like black, brown, and ivory, are available to match your home’s decor. Replace existing switches with easy installation.

About Jasco Products

Based in Oklahoma City, Jasco Products Company designs, develops and engineers consumer electronic products to simplify your life. To ensure your satisfaction, our U.S.-based, bilingual Consumer Care associates are fully trained to assist you with any products in our extensive line.

The future of home automation is here

The add-on switch compliments the latest generation of in-wall smart controls. Unlike other options on the market, the add-on switches provide the same control as a master switch with the functionality of dimming from remote locations. It’s also compatible with 120V and 277V systems for use in residential and light-commercial settings.

With a QuickFit design and groundbreaking SimpleWire technology, the new add-on switches provide easy installation to support GE-branded Z-Wave and Zigbee smart controls. Up to five add-on switches can also be connected to the same light, fan or appliance.

Product description

ABOUT HUE: Philips Hue is the Worldandrsquo; Leader in Smart Lighting.* What is smart lighting you may ask? It means absolute, 100% control of your home's lighting through your smartphone, tablet, Hue wireless dimmer switches and motion sensors or even with your voice! Philips Hue (using the Hue Hub) provides whole home Smart Lighting coverage, including outdoor spaces, without adding a Wi-Fi extender or clogging up your Wi-Fi signal (up to 50 light points on one single Hub). Fill your home with Hue smart Lightstrips, table lamps, chandelier, recessed-can lights and more. Extend your smart light control outdoors (requires the Hue Hub) with Hue Outdoor smart spot lights, smart pathway lights and smart wall lights. Philips Hue is the only smart lighting product with Energy Star certification and its smart light bulbs last up to 22 years.



GOT VOICE? Do you already have a favorite Voice or Smart Home assistant? With the most options for Voice control, Philips Hue Smart Light Bulbs work with any Voice or Smart Home Assistant (Works with Alexa, Google Assistant, Apple HomeKit, Microsoft Cortana, IFTTT, Nest, Logitech, SmartThings, Razer, Xfinity).



HOW IT WORKS: Hue smart bulbs are wireless connected to the Philips Hue Smart Hub for the optimal, voice-enabled smart home experience! The Hue Hub is sold separately or included in all Philips Hue starter kits, and uses a technology called Zigbee. Thanks to this technology one bulb can transmit a signal to other bulbs, so you donandrsquo;t need to add a Wi-Fi extender to cover all the rooms in your house or clog up your Wi-Fi network with additional Wi-Fi devices. Add up to 50 light points on a single Hue Hub. Light Appearance: 2700 kelvin



* According to market share data from leading research bodies in US and Europe; these markets represent over 90% of global sales of both Philips Hue and the Smart Lighting industry.

• Voice Activated: The Philips Hue White and Color Starter Kit works with Alexa for Voice Control (Smart hub required and Included, Alexa device sold separately)
• Limitness Posibilities: Choose from 16 million Colors and shades of White to turn Your everyday Smart Lighting into an extraordinary Experience; Hue Color lights are Controlled remotely with Your Smartphone or Tablet, create custom scenes and unleash Your creativity
• Take Control: Voice Control for Your Smart Home: Control Your Philips Hue lights with Your Voice using Alexa, Apple HomeKit, or Google Assistant; Pair it for Home automation with Your existing Nest or Samsung SmartThings system
• Lasts A LifTime : 25000 hours of life; To install, simply screw in the smart bupounds into your desired light location, download the Hue mobile app and pair your Hue hub; Control smart bulb equipped lamps and overhead hue lights via the Philips Hue App; Ideal for your favorite ceiling fan lights, floor lamps, table lamps, pendant lights, and more throughout your smart home
• Expand Your Smart Home : Easily Expand Your Smart Lighting system with accessories (sold separately), such as a Hue Dimmer Switch, Hue Tap, or Hue Motion Sensor

Product features

How to set up your Philips Hue Smart Lighting

How to set up Hue with Amazon Alexa

Use your voice to turn off the lights from anywhere

Control your Hue lights using your Voice

Create the perfect party with the right lighting

Relax with Philips Hue

Go to sleep with Philips Hue

Light your home smarter with Philips Hue

Wake up naturally with Philips Hue

Energize with Philips Hue

• NO HUB REQUIRED - To connect Hyperikon’s Smart Downlights use a 2.4GHz Wi-Fi band. Simply download the Hyperikon App, connect your Smart Bulb and control your lights by only using your phone or smart device.
• VOICE CONTROL - Control Hypersmart’s Smart Retrofit Lights by using your voice. The color-changing light works with Amazon Alexa (Echo/Dot/Tap) and Google Assistant.
• TIMER & DIMMING - Enjoy the benefits of smart living by scheduling the recessed smart lights to wake you up in the morning, to turn on when you arrive home, or set up the perfect light ambience thanks to the 0-100% dimming capabilities.
• COLOR TUNABLE - Choose your preferred light setting and set your mood. Adjust your color temperature between a warm relaxing 2700k color and a crisp super bright 6500k. The RGB feature means that you can also set this smart downlight to fill your room with any of its vivid colors. Connect with the compatible voice assistants for the ultimate HyperSmart smart living experience.
• 5 YEAR WARRANTY - When we say we've got you covered, we mean it. Should your product fail within the first 5 years from the date of purchase we will fulfill our promise and replace it free of charge to you.

User questions & answers

Question:	Do these require a housing or can be mounted directly to ceiling? Is j-box included
Answer:	Hook
Question:	can these be installed in the sofit areas on the exterior of the home
Answer:	Yes metal ones
Question:	Can these be installed in a damp location such as soffits
Answer:	Our pair came in as black and royal.
Question:	Are these lights switch dimmable or are they app dimmable
Answer:	Yes, shin guards are sold as a pair. Thanks!

Product features

VOICE CONTROL

Through Amazon Echo and Google Home you can turn the lights ON/OFF or change the brightness intensity through voice commands. To pair the bulb with Alexa or Google Assistant enable the Skill in the HyperSmart app.

REMOTE CONTROL

Once you activate the HyperSmart Bulb through the mobile app you will be able to control it from anywhere, provided you have a mobile phone and an internet connection (wireless or cellular). Through the HyperSmart app you will be able to check which bulbs and devices are still running and which are off.

TIMER & SCHEDULING

The greatest advantage of this remote control option is related to the safety of your household. Turn the lights on even when you not at home to give the impression that someone is in or schedule when the lights go ON/OFF even when the whole family is on vacation.

SHARED DEVICES

You won’t need a hub to control you HyperSmart bulbs and sockets, only the HyperSmart app. It enables you to add multiple bulbs and devices and control them from one single point. Also, once set up, you can share the access to the HyperSmart bulbs with your family or friends.

SET-UP REQUIREMENTS

To connect and control the bulb you will need 4 basic items:

1. Working 2.4 GHz WiFi connection
2. Smartphone
3. HyperSmart App - compatible for iOS and Android. Download from iStore or Google PlayStore and create an account.
4. Lamp of Fixture with E26 Medium Base

HYPERSMART APP

Download HyperSmart app from AppStore or Google PlayStore. Find it by searching for "HyperSmart" or 'Hyperikon", or simply by scanning the QR Code (included in the provided installation manual)

Create an account to access and control all you HyperSmart devices.

ADD DEVICE

Screw in the light bulb. Make sure it is within Wi-Fi's range

In HyperSmart app select "Add Device" or "+", and then "HyperSmart Lighting" category.

Connect to WiFi. You will be able to connect to either of two modes - EZ or AP mode. Please make sure your mobile device is on a 2.4 GHz band WiFi.

For detailed instructions see provided manual.

DEVICE CONTROL

Control remotely via the app

Adjust brightness by sliding your finger on the adjustment bar.

Set the mood with the color wheel and preset Scenes (OmniColor Model HyperSmart-A7RGB)

Create multiple schedules

Customize devices' names

Share access to devices with multiple users

Group several devices in HyperSmart app (same model only)

OTA upgrade

IN-APP SETTINGS

REMOVING A DEVICE: click on the icon in the upper right corner and tap "Remove Device". When device is removed successfully the LED indicator will start to blink rapidly.

SHARING A DEVICE: Tap on the " . . ." button from more options, select "Share Devices" and add the account you want to share with.

RESETTING TO FACTORY SETTINGS: Select a device, click "More" at the upper right corner and tap "Restore Manufacturer Defaults". When done successfully the LED indicator will flash.

Product description

Expand your control with the GE-branded Enbrighten Add-on Switch with QuickFit™ and SimpleWire™. When paired with a GE-branded smart switch or dimmer, including Z-Wave and Zigbee controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home.

• WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations. By connecting directly to the smart device, the add-on mirrors its functions. This feature allows you to dim lights, adjust fan speeds, turn fixtures ON/OFF and more based on the capabilities of the primary smart device. While the add-on switch is not a stand-alone device, it provides continued use of your favorite smart-device functions from multiple locations.
• ADVANCED DESIGN 2ND-GENERATION MODEL – Improved components reduced the housing depth by up to 20% compared to previous models and eliminated the need for breakoff tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups.
• ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch.
• COMMERCIAL AND RESIDENTIAL APPLICATIONS – Supports 120VAC and 277VAC for universal use in a variety of systems. The switch is suitable for use in common home 120VAC or light-commercial 277VAC applications. Must be paired with a 277VAC smart device – model 43072 or 43074 – for light-commercial use. Easily replace any in-wall control in a multi-switch configuration to remotely turn on or off and set programs for a wide range of fixtures.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. White and light almond paddles included. Wall plate not included. Works with LED, CFL, incandescent and halogen bulbs as well as other fixtures based on the primary device functionality. Contains two add-on switches.

User questions & answers

Question:	Does the 2 pack come with 2 switches reading reviews that it doesn’t
Answer:	/Duration -:-Loaded: 0%Stream Type LIVESeek to live, currently playing liveLIVERemaining Time -0:00 Playback Rate1xChaptersChaptersDescriptionsdescriptions off, selectedCaptionscaptions off, selectedAudio TrackFullscreenThis is a modal window. .noScriptDisplayLongText { display : none; } .noScriptNotDisplayExpander { display : none; } .noScriptDisplayLongText { display : block; } No you can do 3 ways with 1 main switch and 2 add on. You need one main to control all the add ons. I have a 4 way at home 1 main and 3 add on. … see more No you can do 3 ways with 1 main switch and 2 add on. You need one main to control all the add ons. I have a 4 way at home 1 main and 3 add on. Does are add on switches you need one of the main switches. Here is my YouTube channel! https://www.youtube.com/channel/UCNriHi_l62EORXm1RTDmnIg see less No you can do 3 ways with 1 main switch and 2 add on. You need one main to control all the add ons. I have a 4 way at home 1 main and 3 add on. Does are add on switches you need one of the main switches. Here is my YouTube channel! https://www.youtube.com/channel/UCNriHi_l62EORXm1RTDmnIg
Question:	Is add on switch required? Does the option to have 2 main smart switches work as an alternative in a 3 way switch situation
Answer:	The Neutral wire is required to be the same neutral wire of your lighting circuit, therefore the wire size needs to meet the requirement of your current electrical code.
Question:	Given that this just sends signals (all power at main switch), what size wire is required for the neutral and traveler wires
Answer:	The GE Add-on Switch is not a wireless product, and does not contain any wireless radio. It is strictly for use with a GE Z-Wave or Zigbee In-Wall switch in an existing 3-way installation.
Question:	Does this only work with ge systems, or will it also support open zigbee protocols to function with philips hue bridges
Answer:	Yes, the QC35 have the same input as the QC35. Just tested on my own pair.

Product features

QuickFit

The revolutionary, space-saving QuickFit design features a rounded housing and 20 percent smaller depth compared to previous models. The elimination of heat tabs also offers a more convenient installation and user-experience without reducing the electrical ratings.

SimpleWire

With the SimpleWire technology, the new add-on switch features dual offset ground ports, which save time, simplify installation and reduce wire congestion in multi-switch setups. Neutral wire required.

Why Add-On?

The add-on switch works with all GE-branded In-Wall Smart Switches, Smart Dimmers and Smart Fan Controls for Z-Wave and Zigbee. It even supports 120V and 277V for residential and light-commercial use. Add a up to five switches to any GE-branded smart control to control lights or devices from multiple locations.

Versatility

Automating your home not only makes your life easier, but it also saves energy, cuts costs, and boosts security. When paired with a GE-branded Smart Switch or Dimmer, including Z-Wave and Zigbee controls, the in-wall device completes multi-switch systems. Compatible with LED, CFL, incandescent and halogen bulbs, and other hardwired fixtures.

Personalize

Changeable paddles in a variety of colors, like black, brown, and ivory, are available to match your home’s decor. Replace existing switches with easy installation.

About Jasco Products

Based in Oklahoma City, Jasco Products Company designs, develops and engineers consumer electronic products to simplify your life. To ensure your satisfaction, our U.S.-based, bilingual Consumer Care associates are fully trained to assist you with any products in our extensive line.

The future of home automation is here

The add-on switch compliments the latest generation of in-wall smart controls. Unlike other options on the market, the add-on switches provide the same control as a master switch with the functionality of dimming from remote locations. It’s also compatible with 120V and 277V systems for use in residential and light-commercial settings.

With a QuickFit design and groundbreaking SimpleWire technology, the new add-on switches provide easy installation to support GE-branded Z-Wave and Zigbee smart controls. Up to five add-on switches can also be connected to the same light, fan or appliance.

• VOICE CONTROL: Support multiple devices, fast integration with Alexa Echo Dot/Google Home. Voice command to turn on/off the stip lights, adjust brightness, color, saturation, and choose the scenes according to your need. Please note that our light strip is only compatible with 2.4GHz network, does not support 5G
• APP CONTROL: Wireless control the LED strip lights via phone App anywhere, only need to connect 2.4GHz network once，then you can control your strip lights from anywhere. Supports iOS and Android systems, easy to connect and use. It also comes with a controller box for you to control manually
• MULTIPLE COLORS & 8 SCENES: There is an immense variety of colors you can select from. The bright RGB 5050 Led strip lights can provide 16 million colors（no white light）, and the brightness and saturation can also be adjusted. There are 8 scenes, which can be customized to satisfy your various needs. You can decorate your bedroom, ceiling, stairs, kitchen, porch, desk, and living room with the smart light strip
• SYNC TO MUSIC: The LED light strip has a cool music mode. The built-in advanced sensitive mic creates romance, relaxation, and party ambiance. Light colors will change with the music beats. Ideal for holding parties for holidays like Halloween, Thanksgiving Day, Christmas, etc.
• EASY INSTALLATION: 16.4ft led light strip can be cut short to meet your need. The upgrade 3M adhesive sticks very well, and it also comes with several pieces of clips for extra adhesion

Product features

How to Use Alexa Echo and Google Home?

Step1: Connect your Echo dot with Amazon Alexa, download Gosund APP.

Step2: Log in your Amazon Alexa, choose"Skill" then search"Gosund" and click "Enable"

Step3: Input your account and password of Gosund

Step4: After Alexa is linked to Gosund, and make sure your strip light has added in the APP, you can now control the light via Echo.

How to control it with phone?

Step 1: Download the Gosund APP and keep your phone connected to 2.4G WiFi (5G is not supported)

Step 2: Open the App, Add Device>Lighting>Strip lights

Step 3: Choose the "Other mode-AP mode" on the upper right corner

Step 4: Press button for 4-5 seconds, until you find its indicator light slowly flicker

Step 5: Entering your WiFi password and begin to connect

How to control it with iPhone Siri?

1. Open APP, Click Tap-to-Run., then click the symbol “+” in the upper right.

2. Select your scenes and device strip light, then select the command you need. After done you can see the command you need has appeared in the interface.

3. Click “Add to Siri” in the lower right, then record your command. For example, you can say: “Open Light”

4.Now you can control the light strip via Siri. Say “Hi Siri, Open Light”, The light strip will be turned on.

How to use controller to control it?

You can also directly use controller to control the light strip.

1. Press once to turn on the light strip or change the color.

2. Press and hold for 7 seconds to adjust to flashing mode.

Sync with Your Music

The led strip light can detect all kinds of music, it can flash and change the color according to the rhythm of the music.

Millions Color Changing

Multicolored RGB strip lights are more than 16 million colors could be adjusted which meet your different demand.

Scene Customization

There are 8 scene modes to meet your life needs: Night, Reading, Party, Leisure, Soft, Rainbow, Shine, Gorgeous.

Product description

Bring technology and style to your home with the Lutron Caseta ELV+ dimmer. Caseta wireless from Lutron allows you to control your lights from anywhere within your home with the Pico remote control (sold separately) or from anywhere with your mobile device via the free app and Caseta smart bridge (also sold separately). the Caseta ELV+ dimmer allows you to recall your favorite light level with the new preset button for added convenience, and is designed to control many loads types: 500-Watt of incandescent, halogen, or electronic low voltage, 400-watt of magnetic low voltage, and 250-Watt of dimmable LED or dimmable CFL (neutral wire connection and 10W minimum load required for all load types). out of the box the dimmer is set to control ELV, incandescent, halogen and many compatible LEDs, however is phase selective the dimmer output can be changed for MLV and certain LED bulbs with simple button press programming. The Caseta ELV+ dimmer is a great solution for LED fixtures with integrated, built-in drivers, ELV track lights, and problem LEDs that may prefer an ELV dimmer. To use in a multi-location application, replace the existing switch with a Pico remote control and wall plate Adapter (both sold separately). please note, wall plate for dimmer is also sold separately.

• PEACE OF MIND: Set lights to automatically adjust with seasons so your family always comes back to a well-lit home; enable smart away to randomly turn your lights on/off to look like you’re home even if you’re away (smart bridge, L-BDG2-WH, required)
• MOST CONNECTED: Caseta connects with more leading smart home devices – including Amazon Alexa, Apple HomeKit, the Google Assistant, Ring, Serena shades and Sonos – than any other smart lighting control brand (smart bridge required)
• CONTROL YOUR WAY: Caseta puts the smarts in the switch so you can control a variety of ways – via the free Lutron app, your voice or from the wall; schedule lights to change at set times or activate scenes with the touch of a button (bridge required)
• GET MORE, SPEND LESS: 1 Caseta smart switch can control many bulbs at once; make many bulbs smart, even your existing bulbs. Get smart control of multiple styles of dimmable LED, incandescent, and halogen bulbs
• WIRELESS REMOTE CONTROL: For added convenience, use with wireless Pico remote (PJ2-3BRL-GXX-L01) to turn your lights on, off, or dim and brighten with the touch of a button from anywhere in the home
• EASY 3-WAY SETUP: Create a 3-way by mounting Pico to almost any wall surface - no cutting holes or pulling wire, with a wall mount bracket (PICO-WBX-ADAPT sold separately). Replace existing 3-way switches by mounting the bracket and Pico over the backbox
• EASY INSTALL: Easily replaces your existing switch in as little as 15 minutes; NEUTRAL WIRE REQUIRED

User questions & answers

Question:	I am considering either this dimmer or the pd-10nxd-wh, which is around $40 less expensive- are there any benefits to this product vs the pd-10nxd-wh
Answer:	The PD-5NE is a phase selectable dimmer which allows you to either dim in reverse phase for electronic low voltage transformers or LEDs, incandescent, or halogens looking for a ELV dimmer. Or you could change the phase to dim in forward phase for magnetic low voltage transformers, LEDs, incandescent, or halogens looking for a forward phase dimming signal. The PD-5NE also offers the favorite light level button in the middle of the control.
Question:	Is there any wireless dimmer that will work with a 600w mlv transformer? looks like this only supports up to 400w
Answer:	For your application, Lutron would suggest the PD-10NXD. This device is rated to control 1,000W Incandescent/Halogen and Magnetic Low Voltage. It could also control 250W of dimmable LED or CFL.
Question:	Do you need the caseta pro hub to use this, or can you use the regular hub
Answer:	The regular will work with this dimmer. I own the pro at home with these but I got my parents the regular hub with this same dimmer and it works just the same.
Question:	What's the difference between the elv+ dimmer and the regular caseta smart dimmer
Answer:	The elv dimmer is for electronic low voltage lighting. The standard dimmer is for the more common incandescent and led lights. They are not interchangeable.

• [FAST INSTALLATION IN 10 MINUTES]: GRDE smart switch has easier and faster installation steps than other smart light switches. A 10-minute installation that anyone can do. Bright White Clicking design switch with screwless snap-on wall plate, Requires a neutral line. For 2.4G Wi-Fi only, No hub required. Not dimmable. Max Power: 1920W. Output Current:16A
• [VOICE CONTROL]: The wifi light switch easily integrates with Alexa and Google Assistant. When your hands are full or you can't find the Alexa light switch in the dark, you can say: "Alexa, turn on the Living Room Lights". The light switch also can be used with Spanish Alexa. A great addition to a smart home!
• [CONTROL FROM ANYWHERE]: The electrical light switches work with the smart life app. You can control your lights even you are not at home. Or set up the automation timers for the outside lights (set for sunrise/sunset), then will never have to worry whether or not the outside lights are on or off.
• [NEVER DROPPED WiFi+HIGH POWER DESIGN]: The smart wall switch will connect to the wifi network fast and seamlessly in less than a minute. Even if there is a power outage, the Alexa smart switch will keep status before the offline feature. 16A（Max）hight power design suitable for your incandescent, fluorescent, and LED light bulbs.
• [WAY BETTER CHOICE THAN SMART BULBS]: GRDE smart switches that work with Alexa have the most affordable price, clean and futuristic design, trusted by over 1 million users. As smart bulbs can break and blow with time, these can be used to control lights using your budget led bulbs. Just have wifi smart switch to make the traditional bulb to be smart!

User questions & answers

Question:	Does this have manual switch capability in case of wifi/power outages
Answer:	Clips
Question:	Will this switch work in the garage? Is there a temperature recommendation? Our garage gets pretty cold in the winter
Answer:	At the time of our purchase 18 months ago there were.
Question:	Is this HomeKit compatible
Answer:	There about 13" to 13.5" measured from the ankle to the middle of knee cap. Fits about average 8-12 year old.
Question:	Can i use the switch with a diffetent wall plate
Answer:	Yes

Product features

Switch Indicator Light Control:

You can control the indicator LED on the smart-switch to be on/off freely. When the smart switch turns off and the indicator is set to off, you can create a dark environment so that your sleep will not be disturbed.

Timer and Countdown Timer:

The light will go out when the timer is reached. You don’t have to worry about falling asleep and forgetting to turn off the light. Or you can create a 5-minute automatic turn-off timer when putting your children to sleep.

Group Control:

Combine smart switches and other smart devices into a group easily. With a group you can control multiple lights at the same time. You just need to tap the smartphone app to control them at the same time.

Home Automation：

By setting multiple automation scenes, your smart switch can realize scenes such as turning off the lights at sunrise and turning on the lights at sunset. Make your everyday life more intelligent.

Device Sharing:

Do you have someone who also needs to use the switch with you? Easily grant access to your family members or roommates with the app. Share the convenience brought by the smart-switch.

No Hub Required:

No need for a complicated hub setups. The smart switch can be used with any Wi-Fi router, you only need to replace a traditional switch. Cost and labor are halved.

Product description

15W Waterproof Outdoor super Bright Led Flood Light 100W Equivalent: needed App control ( Not WiFi ). 2-year-warranty, 90-day-refund guarantee.



Note:

1, Can't work with Alexa or Google Home

2, the Max Number of Connection at the same time: for Android: 3-4 led flood lights, for iPhone: 6-8 led flood lights



Technical Parameters:

Color：16 Million Colors+20 Modes

Group control: Yes

Timing function: Yes

Memory function: Yes

Color Change Sync to Music : Yes

Dimmable: Yes

Power：15W, 100W Equivalent

Led initial flux：1200LM

CRI : >80

Light beam: 120°

Input：90-240V

Cable length ：6.56ft / 2m

Color temperature：2700K Warm white + rgb color

Waterproof rating: IP66 ( Do not submerge it into the water)



How to connect:

1, Scan the QR code on the manual to download the APP on Google play or APP Store.

2, Turn on this rgb led flood light .

3, Open the Bluetooth, open the app to complete the pairing.

360 degrees remote angle and distance up to 49 FT, Protect your eyes, because you can remotely control without the need for face-to-face floodlight.



Features:

Group control:

you can easily control all lights together.



Timing function:

Set your led flood light to turn on or off at a specific time.



Color Change Sync to Music:

change colors according to rhythm of music melody. Within 16 million colors and 20 modes, it is perfect to use for stage lights, landscape lighting, backdrop lighting.



Memory function:

Turn off the power and turn the wall washer light on again, the light will remember the color/mode that was last used.



Suitable for video taking and photo shooting:

Any color will not cause strobe to the screen of the mobile phone.



Package Includes:

2 x Melpo Smart Led Flood Light

1 x User Manual

• [ Bluetooth Connect & APP Control smart led flood light ] - This is a 15W RGB color changing led flood light needed APP Control. It's 15W, super bright 2700K warm white, Equivalent 100W， 1200 lumens, CRI > 85. This led outdoor up lights have 16 million colors and 20 modes, music rhythm and timing function. IP66 rated waterproof, suitable for both indoor/outdoor uplights, stage lighting, wall washer light and landscape lighting. 2-year-warranty, 90-day-refund guarantee.
• [ Simple Operation & Connect Easier ] - No gateway. Scan the QR code on the manual to download the APP on Google play or App Store Then just open the Bluetooth, enter the app to complete the pairing. We have adopted the latest Bluetooth pairing technology. You only need open the Bluetooth and enter the app, the floodlights quickly connected to your phone and controlled by your phone, up to Up to 65 feet， So in winter or rainy days, you don’t have to go out to control these outdoor led lights.
• [ How to connect more than 10 lights or even more. ] --- 1, You can connect Light 1--- Light 5 , then set these 5 lights to the color or mode you like, 2, Disconnect the first 5 lights, 3, Connect the remaining Lights 6 --- Light 10, and then set these 5 lights. 4, The lights have memory function. When you turn off the lights and then turn on again, they will be the color or mode before the light off. 5, And so on, you can control many lights with one phone.
• [ Color Change Sync to Music ] - Our Smart led flood light can change colors according to rhythm of music melody. You can choose dynamic or soft music according to your preferences. We have 16 million colors and 20 modes, so it can used for stage lights, led up lights, landscape lighting, backdrop lighting, outdoor strobe light, spot light. and you can use it to decorate your Christmas, Halloween, weddings, garden and so on
• [ Timing Function and White strobe ] - Set your led flood light to turn on or off at a specific time. We can install this rgb flood light in outdoor or indoor environment such as a porch, driveway, backyard, balcony, pergola, patio, garden, the lights turn on and off automatically every day, which changes our lives and makes life easier and happier. White strobe very suitable for Halloween decoration, can imitate the effect of lightning, and you can adjust the speed to get any effect you want.
• [ White strobe ] - White strobe very suitable for Halloween decoration, can imitate the effect of lightning, and you can adjust the speed to get any effect you want.

User questions & answers

Question:	Can this produce blacklight effects or just a purple light
Answer:	It can display different colors, but only 1 color at a time. For example; I have two lamps and wanted 1 lamp to display a purple light and the other to display an orange light. My system does not have the ability to display different colors on each lamp.
Question:	Timer - how do you set the timer function? I don't see the device in the list under Timing
Answer:	I use the HappyLighting Android Version v1.526 app. With that along the bottom of the screen you will see "adjust", "music", "tape", "style" and "timing" . Tap on timing and at the top of the screen it will say "Please select a device" put your finger in that phrase and then drag up and you will see your lights listed. tap on the light you want to control and from there you will see all the options for turning your lights on and off automatically with a timer, or on and off by day and time. The interface is not real intuitive. Good luck!
Question:	Are you able to control both lights, making each one a separate color
Answer:	I just received my LED 2 light package and I wanted to control them as a group. Bluetooth linked one of the lights but not the second light. The second light turns on but does not link to my android phone after trying to link them together to operate the same. Should I return them both or only one?
Question:	How many lights can the app operate? And can you sync them
Answer:	Android phones can connect and control 3-4 lights at the same time, Apple phones can connect and control 6-8 lights at the same time. Yes, you can sync them, you can control them at the same time, so that they can sync. For example: If you have 1 Android smartphone and 7 lamps, 1, You can connect 3 lamps first, and divide these three lamps into group 1, so you can control these 3 lamps together. 2, Then disconnect these three lamps, then connect the remaining 4 lamps and put the 4 lamps into group 2，so you can control the 4 lamps at the same time. 3, Of course, you can also control each lamp in the group separately.

Product description

Expand your control with the GE-branded In-Wall Add-on Switch. When paired with a GE-branded smart switch or dimmer, including Z-Wave, Zigbee and Bluetooth controls, the hardwired device completes multi-switch systems. Wirelessly operate and schedule indoor or outdoor fixtures from up to five locations for effortless management of your home.

• WHY AN ADD-ON SWITCH – Add-on switches allow GE-branded in-wall smart controls to operate correctly in multi-switch configurations. By connecting directly to the smart device, the add-on mirrors its functions. This feature allows you to dim lights, adjust fan speeds, turn fixtures ON/OFF and more based on the capabilities of the primary smart device. While the add-on switch is not a stand-alone device, it provides continued use of your favorite smart-device functions from multiple locations.
• ULTIMATE FLEXIBILITY – Compatible with any GE-branded smart control to operate lights or devices from multiple locations. The add-on switch sends commands to the connected in-wall Z-Wave or Zigbee switch, dimmer or fan control for full use of home automation features in 3-way configurations. For easy installation, the add-on switch only requires neutral, traveler and ground wires. It cannot be used as a standalone switch.
• Requires a GE Home Automation Switch. This is NOT a standalone switch. (This product is an add-on only switch, and requires an existing GE Home Automation Switch to function. Without a GE Home Automation Switch, the Add-On Switch WILL NOT OPERATE.)
• MULTI-SWITCH OPERATION – Easily replace any in-wall control in a multi-switch configuration to support the features of the primary smart device to which it is connected. Up to four add-on switches can be added to a smart switch or dimmer to operate fixtures from as many as five locations.
• COMPATIBLE DEVICES – The add-on switch mirrors the functions of the primary smart device. It offers ON/OFF control when paired with a switch, dims when connected to a dimmer, adjusts speed when used with a fan control and many other home-automation commands.
• EASY INSTALLATION – Requires indoor in-wall installation with hardwired connections. NEUTRAL WIRE REQUIRED. Wall plate not included. Works with LED, CFL, incandescent and halogen bulbs as well as other fixtures based on the primary device functionality.

User questions & answers

Question:	i m confused. are all the add on and main switches supposed to control a single light
Answer:	The Add-On Switch cannot control a light by itself and doesnt contain a wireless radio. It is designed for use with a GE Z-Wave/Zigbee/Bluetooth In-Wall Smart Switch to replace an existing 3-way installation in your home. 3-way installations are when you have 2 light switches controlling the same light(s) such as 2 switches on either side of a long hallway controlling the light in the middle, or 2 switches on the top and bottom of a stairwell that control the light in the middle. If you have multiple lights that all wire to different switches, you will need a Smart Switch to replace each switch. You would not use an add-on switch for those instances.
Question:	Any chance these are compatible with wemo
Answer:	No. Wemo is a WiFi switch
Question:	What parts do I need on both ends for this switch to replace a three way switch? Thanks
Answer:	You will need This model GE 12728 as well as a either the GE 14292 (Switch model) or GE 14295 (Dimmer model). Once installed you will need a Z-Wave Hub/Controller such as SmartThings, Wink, or other hub to control the Z-Wave switch or dimmer you chose.
Question:	Will this switch work for a Non 3 way application
Answer:	One confusion here is that there is more than one switch for this listing, so asking about "this switch" might be hard to answer. SO I want to be very clear. Either the GE 12727 or 12729 will absolutely work as a 2 pole switch. It does not have to be used as a 3-way only. For a regular 2-way switch you just keep the traveler terminal insulated. Right out of the box, that's actually the way they come. You have to remove a tape tab if you want to use them as a 3-way switch. Note that for 3-way or 4-way operation, yo need the "add on" switch (also listed on here).

Product features

GE Add-On Toggle Switch

Transform any home into a smart home with the GE Smart Lighting Control Add-On Toggle Switch. The toggle switch replaces your current switch, uses existing wiring and provides your home with ultimate flexibility when combined with a GE In-Wall Smart Switch, Dimmer or Fan Control. It is compatible with GE In-Wall Z-Wave, Bluetooth, and ZigBee Switches, Dimmers and Fan Controls, providing your home with ultimate flexibility.The GE Smart Lighting Control Add-On Switch operates as your home automation systems secondary control where three-way or four-way wiring configurations are required.

Ultimate Compatibility

Compatible with GE In-Wall Z-Wave, Bluetooth, and ZigBee Switches, Dimmers and Fan Controls.

Full Control in Every Switch

Mirrors functionality of the GE Smart Control with which it is paired. All paired switches perform the same functions.

Simple Conversions

Controls lighting from up to five different switches, in as little as 15 minutes.

Perfect for Any Home

Works with all LED, CFL, halogen and incandescent bulbs, as well as fans, pumps, appliances and more.

GE Z-Wave Plug-In Smart Dimmer

Transform any home into a smart home with the GE Z-Wave Plug-In Smart Dimmer. The lamp module enables wireless control of on/off and dim functions for standard incandescent table and floor lamps, as well as dimmable fluorescent, LED and CFL fixtures and more. Take control of your home lighting with GE Z-Wave Smart Lighting Controls!

GE Z-Wave In-Wall Smart Switch

Transform your home into a smart home with the GE Z-Wave In-Wall Smart Switch. The smart switch uses existing wiring to remotely control the on/off functions of your permanently installed lighting and ceiling fans. It can be used in groups of multiple lights or turned on and off within ambient interior lighting scenes to provides your home with ultimate flexibility. Take control of your home lighting with GE Z-Wave Smart Lighting Controls!

GE Add-On Paddle Switch

Transform your home into a smart home with the GE Add-On Paddle Switch. The toggle switch uses existing wiring and provides your home with ultimate flexibility when combined with a GE In-Wall Smart Switch, Dimmer or Fan Control. The GE Add-On Paddle Switch operates as your home automation systems primary control, requiring three-way or four-way wiring configurations. Take control of your home lighting with GE Smart Lighting Controls!

Product description

The Corsair Commander Pro grants superior and accurate hardware control with a compact, all-in-one device. It is fully compatible with Corsair link devices and supports up to six fan connectors, two internal USB 2.0 headers, four temperature inputs, and two RGB LED channels. Accurately monitor how your system reacts when you push it to its limits. Manage your fans without pressing knobs or switches through the intuitive Corsair link software. Synchronize your RGB lighting effects with the HD RGB fans, SP RGB fans and individually addressable RGB LED strips to light up your build.

• The Corsair iCUE Commander PRO turns your case into a smart case, using Corsair iCUE software to control up to six case fans and two RGB lighting channels
• Powers up to six DC or PWM fans with voltage and PWM control, including the ability to run at zero RPM for total silence
• Two RGB lighting channels provide powerful software control of Corsair individually addressable RGB LED strips and Corsair RGB fans
• Four repositionable temperature sensors allow you to accurately monitor temperatures throughout your system with Corsair iCUE software
• Two USB 2.0 internal headers allow you to easily connect internal USB devices, such as a Corsair AXi Series PSU or motherboard front panel
• Set up custom fan curves and lighting profiles to automatically adjust fan speeds and RGB lighting based on system temperatures
• Powerful Corsair iCUE software brings everything together, allowing you to customize RGB lighting, monitor CPU and coolant temperatures and adjust fan speeds, all from a single intuitive interface
• Commander PRO’s low profile design and included adhesive backing makes it easy to install behind your motherboard, or on any flat surface inside your case

User questions & answers

Question:	Can I control 6 fans rgb color and 6 fan controls such as rpm’s
Answer:	It plugs into both. It uses a sata connector for power and a motherboard fan header for speed control. The motherboard connection is not required if you use the remote speed control device.
Question:	Will this be able to control 3 hd120s and 3 sp120s
Answer:	No, power comes from computer power supply. I just looked at the box and spare manual switch. You could rewire a external power supply to work, but then you would have a expensive extension cord with many tiny fan plugs.
Question:	I'm really confused... do i even need the lighting node thing to control the lighting effects for the fans and led strips and link them up
Answer:	You can plug 3pin fans into the 4pin headers but as far as I can tell any 3pin fans in 4pin headers run at full speed. The only 3pin fan that able to be controlled by motherboard or remote was in Fan1 header for variable speeds. I am not sure the 4pin headers can be voltage control like on a motherboard except in Fan1 header with a 3pin fan. Fan1 header appears to work just like the motherboard header able to be PWM or Voltage controlled. All 3pin headers in the fan controller were able to be voltage control to match Fan1 header speed connected with either a 3pin or 4pin fan.
Question:	So i assume corsair wouldn't be nice enough to include an LED strip with the commander pro
Answer:	Yes, which ever fan, 4 pin or 3 pin is plugged into Fan1 header will report back to the motherboard its RPM. You have to connect the Motherboard Cable into Input and motherboard fan header. Do not use the Manual Remote if you want to see RPM. Manual Remote only lets you select 3 speeds and bypasses motherboard all together.

Product features

TURN YOUR CASE INTO A SMART CASE

The CORSAIR Commander PRO gives you unparalleled control over your system’s performance and RGB lighting. Get in-depth insight into your system temperatures in real-time and set up intelligent fan curves to automatically adjust speeds based on your system’s demands.

CONNECT. COMMAND. CONTROL.

The CORSAIR Commander PRO controls up to six case fans and two RGB lighting channels, with four repositionable temperature sensors and two USB 2.0 internal headers.

PRECISE FAN CONTROL

Controls up to 6x 3-pin DC or 4-pin PWM fans, including the ability to run in a Zero-RPM fan mode for total silence.

STUNNING RGB LIGHTING FOR YOUR PC

Two RGB lighting channels combined with powerful CORSAIR iCUE software complete customization of individually addressable RGB LED strips and CORSAIR RGB fans.

• "ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).
• Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).
• The dimmer allows you to wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day.
• Easily replace any standard in-wall switch with the GE Z-Wave controlled dimmer switch to turn lighting On/Off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or turned on or off within ambient interior lighting scenes.
• Requires in-wall installation with hard-wired connections - Neutral wire is REQUIRED (wall plate not included)

User questions & answers

Question:	Does this switch require a neutral to work. All I have is a load, a line, and a ground. Instructions only show load/line configs
Answer:	Yes, this is a baseball item.
Question:	What's the button underneath the toggle switch for
Answer:	A pair (You don't just buy one glove!)
Question:	is it compatable with logitech
Answer:	Yes, it is a set of TWO. I purchased these for our son this summer and they're great quality and YES there are 2.
Question:	Will this dimmer work with LED lights? has anyone actually used this with recessed LED lights? thanks in advance
Answer:	No, these are a 13” leg guard (youth) and Rawlings intermediate leg guards are 15.5”.

Product features

GE Z-Wave In-Wall Smart Dimmer Switch

Wirelessly schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day.

Ultimate Flexibility

Schedule, control and adjust the brightness of any hard-wired, dimmable light in your home anywhere in the world, at any time of the day.

Complete Control

Wireless control from smartphones, tablets, PCs and Z-Wave enabled remotes.

Works ONLY with Dimmable Bulbs

Compatible with dimmable CFL, LED, incandescent, halogen bulbs - dimming lights helps extend bulb life and save you money!

Requires Neutral Wire

Replaces your current light switch and is easy to install using your home's existing wiring. *Please ensure your home has a neutral wire before purchasing.

GE Z-Wave Plus Plug-In Smart Dimmer

Wirelessly schedule, control and dim two lamps together from anywhere, at any time with any mobile device. This Smart Dimmer contains two Z-Wave controlled outlets allowing control of two devices at the same time (not independent of each other).

GE Z-Wave Plus Outdoor Plug-In Smart Switch

Wirelessly schedule and control your home's outdoor lighting and appliances, including seasonal and landscape lighting, fountains and pumps, from anywhere, at any time. Features one Z-Wave enabled outlet with integrated outlet cover that protects module from dirt and debris when not in use. Weather and impact resistant housing withstands damp or wet conditions.

GE Z-Wave Plus In-Wall Outlet

Transform any home into a smart home with the GE Z-Wave In-Wall Tamper-Resistant Smart Outlet. It replaces a current electrical outlet and uses existing wiring, giving you a Z-Wave-enabled outlet for controlling appliances and another standard pass-through AC outlet for other electrical appliances.

• Take Control by Voice: LED strip light works with Alexa and Google Home via simple voice control. Use simply conversations like "turn on/off light", "change color to blue", "dim/brighten light" to control. Release your hands, control lights freely
• RGBIC Effect: Adopting IC chips, various colors can be chasing in a line. The light strip shows a rainbow-like (dreamcolor) effect, providing an amazing visual experience for you [Warm Notice: this strip light is not able to be cut]
• Control from Anywhere: With Bluetooth or WiFi connection, the colored lights can be wireless controlled without distance limit even when you are away from home. Timer function on App "Govee Home" saves your time to switch on/off the strip light
• Dance to Music: With a high-sensitive mic, the strip light syncs to music and sound. Colorful lights change colors and flashing speed with rhythm and melody so that it's ideal for party, bedroom, stairs, cupboard, desk decoration
• Easy Installation: With this led light kit, you don't need any other tools for installation. With double-sides adhesive, it can be stuck on dry, clean, flat surface easily. 5 support clips attached are for better fixation

User questions & answers

Question:	There doesn't seem to be a consistent answer about cutting. in fact the vendor says both yes and no throughout the q&a pages. help
Answer:	I placed mine on top of my cabinets and needed to cut them and splice them. My cabinets have a gap where my window is. I used https://www.amazon.com/gp/product/B07TJF981M/ref=ppx_yo_dt_b_asin_title_o08_s03?ie=UTF8&psc=1 to make the splice worked great. I tested the lights before making the splice and they did turn on. I did not test them to see if they had all functions but from the few minutes I did play with the cut section it seemed to have all functions.
Question:	Can I add more led light roll to extend lengths to be
Answer:	Yes you can, but keep in mind that the controller can program certain amount of serially connected LEDs that equals exactly one strip, no more, so no daisy chaining. To control 2 strips, you connect strips in parallel, using provided Y (2-to-1) splitter. To control more strips you need to get (3-to-1) or (4-to-1) splitter, so you get star-like configuration. Then with help of additional cable extenders you can organize them in one long strip. Keep in mind the chasing effect will not continue from one strip to another - it will repeat itself in each segment. Also you may need to replace provided power supply with stronger one (more Amps, same 12V) to control more than 2 strips.
Question:	Can the two 16.4 sections be connected in series or do they have to be parallel
Answer:	Not only does it clearly advertise as a 32.8 Foot long Light Strip, they advertise a picture clearly stating, “32.8ft Longer Light Strip 2x5 led strip lights decorates your whole room.” No where does it mention it’s two 16 foot strips that can only be parallel and that you’d need to purchase two of these boxes to actually be 32.8 feet and go the whole perimeter of a room. So the Captain Amazing reply is false, just like the advertisement. Why wouldn’t this company just be specific? Advertise correctly instead of misrepresentation. Let the customer know it’s 16.4 feet and you’ll need to purchase two boxes if you need the whole room or 32.8 feet!!
Question:	Can i cut the strip, cause is to long
Answer:	Yes, the strip can be cut. The 5050 LED strip has clearly indicated cut lines. Also, the 5050 LED 3 pin strip can be connected with other 5050 LED 3 pin strips or extension cables using connector kits.

Product features

Advanced RGBIC LED Strip Lights, Bring Brighter and More Vibrant Lighting.

1. RGBIC LED light strip has an extra IC chip between each 3 LEDs. The unique chips enable you to DIY every 3 LEDs' color to splice. And RGB LED lights cannot splice colors.
2. Adopts with IC chips, RGBIC light strip is able to show multicolor chasing in a line at one strip. RGB leds can only show one color at one moment.
3. As the app controls every IC chip, RGBIC light strip is not able to be cut. Once cut, the rest parts will not able to use.
4. RGBIC 5050 leds are brighter than RGB leds which brings more vivid colored lighting.

WiFi Wireless App Control

Add several devices in one group to control them at the same time. Color up your whole room with a simple tap.

Scenes Mode

Set your smart led lights to match multiple occasions such as dating, gaming, party.

DIY Mode

Choose your favorite ones from 16 million colors on palette to create your unique indoor colored lighting.

Fire up Party with Music & Colors

Turn on music, let the light dance with tempo. Cool flashing lights active party atmosphere! 16 million colors available in phone app. Relax and indulge in the carnival right now!

Ding! Time to Enjoy Lighting Colors

Set a light schedule via timer function in Govee Home App. The light turns on/off automatically according to preset time. Choose your favorite colors to turn on the lighting!

Ambient Lighting

Suitable for indoor use, and can be used for Christmas, party, wedding, and New Year's decorations. Create your favorite ambience.