13 best motion sensor for indoor light

Product description

The Westek MLC162BC Motion-Sensing Light Control is perfect in laundry rooms, garages, basements, attics or any area where you need light. Lights will automatically turn on as you enter, eliminating the need to fumble for a switch in the dark. The control detects motion in a 120-degree radius and within 20 feet when mounted 8-feet above the ground. Easy installation, screw the sensor into any existing light socket, then install a lightbulb of choice into the control. Lights automatically turn off 10 minutes after motion is no longer detected. Compatible with compact fluorescent, LED or incandescent bulbs up to 75 Watts. AmerTac manufacturing brands offer complete lines of distinctive decorative home accent products that include trend-setting wall plates, money saving LED night lights, innovative under cabinet lighting and LED battery operated lights. We also offer utility product lines including energy-saving timers, dimmers and lighting controls, as well as an extensive offering of consumer electronics accessories for the home and office.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed. This light control automatically turns a light on when motion is detected in the room and off 10 minutes after you leave. Senses activity at distances up to 30 feet away when mounted 8 feet from floor, with a detection zone up to 120°. It is perfect for laundry room, garage, basement or attic because it eliminates the need to fumble in the dark for a switch or pull-string. Caution: This motion sensor is not designed for use with an enclosed or shaded fixture of any kind. Infrared cannot penetrate glass or plastic. Use only with a ceiling mounted, bare bulb light socket. Works with any compact fluorescent or incandescent bulbs, 75 Watts Max. Do not use with halogen bulbs.

• MOTION SENSING LIGHT CONTROL - automatically turns on when you enter a room; never fumble for a light switch in the dark again
• WIDE RANGE - detects motion in a 120-degree radius and within 20 feet when mounted 8-feet above the ground with a 10 minute auto-off
• MODERN STYLE - contemporary white finish and sleek design makes this a perfect accent that works with any decor
• VERSATILE - works with compact fluorescent, LED or incandescent bulbs up to 75 Watts
• EASY INSTALLATION - screw the sensor into any existing light socket, then install a lightbulb of choice into the control

User questions & answers

Question:	is there a reset on it? mine stays on all the time now
Answer:	The lights requires 3 * AA batteries (not included), remote powered by 1 * CR2032 battery (included)
Question:	Will this work in india? in 220 V
Answer:	Press button on the remote controller, the red indicator light means it's on, begin to work
Question:	Will this work with LED bulbs
Answer:	Hello, I wish I could answer the question for I haven’t had the lights on for a full 8 hrs to give an accurate reply. Sorry. I just got the lights put up last week and haven’t given them a full workout.
Question:	I replaced the bulb, now the light stays on all the time. Is there a trick to get it working with a new bulb? The replacement bulb is the same
Answer:	Yes, the solar string lights is automatically charged during the day and lights up automatically at night. please press the ON/OFF button to turn it on.

• ➤Specs: Output Power: 12W(100-Watt Equivalent); Input Voltage: AC100-240V; Cold White (6000-6500K); Luminous: 1000lm; Lamp Style:E26; Working Temperature: indoor use and outdoor use if outside temperature is between 14°F(-10°C) and 95°F (35°C)
• ➤PIR Motion Sensor Included: High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark, and automatically off after the motion ceased or disappeared about 45-60 secs. NOTE: Make sure the sensor is pointing down within proper distance and angle. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people
• ➤Built-in Dusk to Dawn Sensor: This movement sensor light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux) NOTE: Will not turn on in the daytime even when they detect motion. And if you use it for the first time during the day, it will turn on for 30 seconds and off when you turn on light switch.
• ➤Energy Saving and Usage Occasion: These movement sensor light only light up in the detective range at night or in dark environment, energy-saving, environment protecting and long life, can be use in stairs, hallway, bathroom, front door, storage room, garage, closet, balcony, gate and so on. The higher you hang the bulb, the larger detection range it achieves as the highest could be 10 feet vertically
• ➤Package Includes: 2 x Aukora Cold White Motion Sensor Light Bulbs, 1 x manual. Welcome to use Aukora's products, you will get the best after-sales service. Enjoy Your Colorful Life, Just Start From Aukora!

Product features

Enjoy Your Colorful Life, Just Start From Aukora!

The motion sensor bulb with auto switch are very convenient in home life, it will light up automatically (Keep on for 30-45 seconds) while the motion light bulb detect motion in the detective range in the dark, if you want to get up at midnight, you don't have to turn all lights on and wake others up. The bulbs could be widely used in basement, front door, garage, carport, pantry room, storage room, stairs, corridor, patio etc. It is like an intelligent servant, lighten your way home.

Motion sensor + Light sensor

When the motion sensing light bulb detects someone passing by in the dark, they will automatically light up(Keep on for 30-45 seconds), otherwise they will keep off. Smarter, more economical and convenient.

Built-in Dusk to Dawn Sensor

This movement sensor light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux)

PIR Motion Sensor Included

High quality PIR infrared sensor is installed at the tip of bulb, outdoor motion sensor light bulbs can detect infrared heat waves emitted when the human body moves

Led A19 Light bulbs

Indoor motion sensor light bulbs provide 1000 Lumen of cool white light, equivalent to 100-watt incandescents with 90% less energy use, Last longer and energy saver

1. Keep off in the daytime

There is a dusk to dawn sensor inside the bulb, so it will not turn on in the daytime even if it detect motion.

2. Auto turn on in the dark when detect motion

High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark

3. Auto turn off in 45 seconds

Auto turn off after the motion ceased or disappeared about 45 seconds, save your power effectively.

Specs

• Power: 12W(100-Watt Equivalent);
• Input Voltage: AC100-240V;
• Cold White (6000-6500K);
• Luminous: 1000lm;
• Lamp Style: E26/E27 base;
• Detection angle: 120°, height: 8 ft-10 ft
• Color rendering index: >80
• Package: 2 x Aukora Cool White Motion Sensor Light Bulbs, 1 x manual

NOTE 1

Because with a clear glass cover or fixture will educe the radius of motion detection, we don't recommend you install the bulb into a closed lamp fixture. If you have to do this to make it avoid get wet, please let the motion sensor exposed outside, so it can detect motion well

NOTE 2

The bulb should be installed downward and no higher than 10 feet, or the sensor will not work. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people are coming.

NOTE 3

• If you use it for the first time during the day, it will turn on for 30 seconds and then keep off
• Please keep a distance: Don’t install 2 led light bulbs into 1 fixture or too close(less than 10ft), the bulbs function will be affected by each other.

Wide usage occasion-outdoor

Porch lights and garage lights

Wide usage occasion-indoor

Corridor lights

Wide usage occasion-home

Stair lights

Wide usage occasion-home

Closets lights

• Change Normal Bulb into Motion-Sensing Light - Simply screw the motion sensor light socket unit into any existing indoor light socket and add a light bulb.
• Easy Installation in an Existing Socket - The motion sensor socket automatically turns the light on when you enter and off when you exit the room and installs just like a light bulb.
• Motion Sensor Automates Lighting - Get the ease of automatic, hands-free lighting with this convenient motion sensor light socket. When mounted 8-10 feet above the floor, the socket senses motion up to 10 feet away in any direction. It turns off automatically after your setting time if no movement is detected to help you save energy costs.
• Indoor use only & 360° motion detection - These motion sensor light sockets are perfect for laundry rooms, basements, attics, garages, and walk-in closets.
• No more forgetting to turn the lights off - Hands free automatically turns light on when entering and off after exiting the room. We needed this for the garage. It is great to walk into the garage and the light comes on for us. Often times hands are full and the last thing I want to do is put everything down in order to get to the switch. It stays on the time as your setting! Installed in garage, don't have to look for light switch when we get home.

User questions & answers

Question:	Will these motion activated light sockets work in an enclosed lampshade
Answer:	Hope you're able to return your faulty unit. I also bought two, but only installed one. The installed one works very well as described in my review, but the other unit is still unopened. Hope it works as the other when I finally use it.
Question:	Does the motion activated light sockets switch have actually be switched on for the motion to work
Answer:	Of course, regardless of the no# light sockets we can always choose to use one bulb even when connected to one motion detector. This particular motion detector is bulky, however as long as there isn't any obstacle to prevent the detector from installation or twisting on you're good to go. On another note; When you turn the light switch off the detector will become deactivated, when the switch is turned back on the motion detector lighting will turn on; essentialy reseting the motion detector; as long as the light switch remains in the on position the motion detector will operate normally.
Question:	What's the maximum voltage, can it work with 230v
Answer:	I have owned this for a while and I use this for a ceiling light ( a rather high ceiling ) for sensing ground movements. The usual indoor sensers only sense movements on a horizontally plane, as I understand it. So I use this one and turn the sensing panel towards the floor, indoor. It works fine. To answer your question. There is no control or adjustment for any function of this device. The time of the light staying on is some what unreasonable in my opinion. It stays on for ten (10) minutes after being turned on by the senser. I cannot think of many situations one would need the light to stay on for ten minutes after one leaves the area where the senser is located. In summary the device has no control or adjustments of any kind but it works satisfactorily. Thank you for your attention.
Question:	How many pcs motion sensor light sockets in this parcel
Answer:	Sensor has a 180 degree pivot arm adjustment and I'm guessing a 10-15 degree back to front wiggle movement. I have the Westek connected to a porch cieling fixture with the sensor facing "Downward" and adjusted to max forward position, like toward the bulb. Porch cieling fixture is betwix steps leading from main porch entry/ exit and steps leading to 2nd fl landing; under these circumstances the sensor adjusted facing downward can easily capture movement in either direction of the stairs!

Product features

Balcony Lighting

Can work as Porch lights.

Bathroom/Laundry room Lighting

If you want to get up at midnight, you don't have to turn all lights on and wake others up.

Stairs/ Front door Lighting

This smart sensor light will light your way home.

Basement/ Garage Lighting

Automatically turns light on when entering and off when exiting the room.

Motion sensor light socket TIPS:

Please make sure the motion sensor is facing the desired motion area with proper distance and angle.If the room is too large, this socket may not suitable.

Make sure the 2 bulb spacing is more than 15ft.

When installed it in the lampshade, pay attention to whether the size of the lamp body is suitable for the lampshade,the lampshade may effect the sensitive of the socket.

When testing in daylight, please turn LUX knob to SUN position, otherwise the sensor lamp would not work.

Product description

Youtob motion sensor ceiling is the brightest indoor/outdoor light in the line, providing 1200 LM of cool white light with a unique design to spread the light for a wider coverage area, ideal for lighting large closets, stairways, hallways, pantries, and storage areas. The clean, modern design complements any home decor and easier installation. The ceiling light includes features such as motion activation, auto shut on/off, a light sensor to prevent daytime activation and lasting over 30000 hours.

 

Features:

● Activates when motion is sensed within 9-16 feet and automatically turns off 30 seconds after motion stops

● Two modes available: the DAYLIGHT mode works in the day and the night, and the NIGHT sensor mode will not light up during the day.

● Quick and easy installation

● Energy Saving and longer lifetime.

● Designed to work in all weather conditions

● Bright and powerful LED provides 1200 lm of cool white light

● Modern design complements any home aesthetic and can be used indoors or outdoors

Specification:

Number of LEDs: 81

Power: 15W

Illumination: 1200 LM

Color Temperature： 4000K

Light Color: Cool White

Voltage: 110-120V

Color Rendering Index (CRI): ≥80 Ra

Shape selection: Round

Lifetime:over 30000 hours

Diameter: 8.66 inch

Sensing Distance：10-25ft

Sensing Angle：90° -120°

Size: 220*220*18mm

Sensing Mode：PIR Sensor + Light Sensor

Package Contents:

1 x Youtob Led Ceiling Light

1 x Bracket

11x Mounting hardware

1x User Manual

Warranty

Youtob warrants this product to be free of defects in parts, materials and workmanship for a period of 18 MONTHS, from date to purchase. If you have any issue with the LED light just feel free to contact us!

• 【Motion Activation】Youtob motion sensor light will turn on automatically when you come close. Activates when motion is sensed within 9-16 feet and automatically turns off 30 seconds after motion stops. Ideal for hallways, Closet Rooms, stairways, basements and many more commercial or residential applications. Get your life more convenient!
• 【Two Modes Available】 The DAYLIGHT mode works in the day and the night, and the NIGHT sensor mode will not light up during the day. Night mode is more suitable for using in outdoor. Provides 1200lm comfortable brightness and 4000k color temperature to make sure you never stumble in the dark.
• 【Easier Installation】 Youtob hardwired LED ceiling light offers easier installation and detailed installation guide. With a bracket and all mounting hardware included, Simply get your light ready to go!
• 【Energy Saving】 Equivalent to the brightness of a traditional 100 Watt fluorescent tube, using 15W LED only, save you 85% electricity. Lasting over 30,000 hours, Don’t worried about frequent light fixtures replacing.
• 【18 MONTH WARRANTY】 Youtob provide you high quality product and the best customer service. If you have any issue with the led light just feel free to contact us!

Product features

Features:

● Activates when motion is detected within 9-16 feet and automatically turns off 30 seconds after motion stops

● Two modes available: the DAYLIGHT mode works in the day and the night, and the NIGHT sensor mode will not light up during the day.

● Quick and easy installation

● Energy Saving and longer lifetime.

● Designed to work in all weather conditions

● Bright and powerful LED provides 1200 lm of cool white light

● Modern design complements any home aesthetic and can be used indoors or outdoors

Specification:

• Number of LEDs: 81
• Illumination: 1200 LM
• Color Temperature： 4000K
• Light Color: Cool White
• Voltage: 110-120V
• Lifetime: Over 30000 hours
• Sensing Distance：9 to 16ft
• Sensing Angle：90° -120°
• Size: 220*220*18mm
• Sensing Mode： PIR Sensor + Light Sensor

Installed in Closet

Installed in Hallways

Installed in Front Door

Installed in Basement

• ✅【PIR Motion & Dusk to Dawn】 Auto-on when the detector senses a moving object within 14.7 feet and auto-off after 30 seconds of no motion. It will turn on only when it is dark (the brightness less than 15Lux) and when motion is detected
• ✅【User Friendly】Motion sensor light bulb frees your hands, no need to switch on/off physically. Ideal applications include entrance, stairs, hall way, bathroom, basement, garage, storage room, laundry room, balcony, porch, hallway, gate and so on.
• ✅【Energy Efficient】 60 watt equivalent motion activated bulb uses only 8.5 watts, saving up to 85.8% energy than its incandescent equivalent. Long lifespan of 15,000 hours, effectively reduces frequency of changing light bulbs
• ✅【Features】 Motion sensor light bulb, standard E26 medium screw base, 60 watt equivalent, 4000K daylight, 800 lumens, CRI 83+, AC 120V, lights up within 0.1 seconds, damp located rated
• ✅【100% Hassle Free】 UL Listed Qualified, means that our product meets strict requirements for safety and efficiency. Comes with a 2-year warranty, which is proof that you've got all your needs covered. Please feel free to email us for any query and we will be in touch within 24 hours.

User questions & answers

Question:	Bulbs won’t turn off in bathroom even 1 hour later, what can I do to fix
Answer:	I have them on my Christmas tree alongside “regular” lights, and thought the bulb is shorter, the brightness is very similar. I can’t tell the difference from a few feet away.
Question:	Can you turn off the dusk to dawn feature so that the lights remain off in the dark
Answer:	I don’t know as they never worked
Question:	Do these lights have a settings where you can keep the light on for a extended period of time without movement
Answer:	From solar panel to first light is 6 ft.
Question:	is this one bulb or two bulbs
Answer:	I never used those sorry

Product features

Stay off

The bulb keeps off at daytime (≥ 30lux) even if motion is detected.

Auto on

Auto on in dim light (≤ 15lux) when motion is detected.

Stay on

Continuous movement within the 14.7ft keeps the bulb always on.

Stay off

Auto off in 30 seconds when motion ceased.

Notes:

If you use it for the first time during the day, it will turn on for 14.3 seconds and then keep off.

Please keep a distance: Don’t install 2 led light bulbs into 1 fixture or too close (less than 6ft), or the sensor will not work.

The bulb should be installed downward and no higher than 10ft, or the sensor will not work.

Please do not install this bulb in eclosed fixtures.

keep the head of the bulb uncoverd and the switch always on.

The sensing ability of bulbs is affected by temperature, the sensing distance in summer will be shorter than in winter.

High-Sensitivity Detector

Dusk to Dawn Sensor, 14.7ft Range Infrared Motion Sensor.

Crime Deterrent

Bring safety to your home.

Smart Home

Enjoy your hands-free way.

Product description

TOPGREENER TDOS5 Motion Sensor Switch automatically turns lights and motors on and off according to the motion (occupancy/vacancy) detected in the room. There are two modes: Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode lights are automatically turned on when you enter a room and automatically turned off after the room is vacant. This is especially convenient when entering a room with your hands full, such as an entryway, laundry room, garage, etc. Avoid fumbling in the dark for the light switch or tripping when entering a dark room. Having the lights automatically turn on will deter thieves and allow a surveillance camera to capture clear footage. Use OCC mode for the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy mode is another option to choose from, which requires manually turning the light on and automatically turns the light off when the room is vacant. VAC mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. This ensures the most energy savings because the user decides when to turn the lights on. The TDOS5 sensor switch provides reliable performance. When no motion is detected within the set time delay the load will turn off automatically. The PIR sensor switch's visually aesthetic design and broad compatibility make it a good choice for you to upgrade your home. Variable time delay from 15 seconds to 30 minutes allows users to choose their preferred option. This occupancy sensor switch is only for single pole use. A neutral wire is required for installation.

• 2-pack motion sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
• Sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
• Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
• Light switch sensor features adjustable settings; variable time delay from 15 sec (Test) to 30 min; adjustable range
• NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view; 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; single pole only; 2x wall plates included; CA Title 20 & 24 compliant; UL listed; 1-year

User questions & answers

Question:	Are they only available in white
Answer:	I have only seen them in white so far.
Question:	does it work with two-way switch
Answer:	I don't know. We have it on a single switch and it works great
Question:	My wire includes a black, a white and a copper. How do I connect them to the switch which has 4 wires
Answer:	It seems that your neutral wire is missing. Please check the back of your box to see if there is a bundle of wires, which should be your neutral. Otherwise, you will need the TDOS5-J model, which does not require neutral but requires a ground: https://www.amazon.com/dp/B01IO1M5WW?ref=myi_title_dp
Question:	What is the "Light" adjustment dial for? Is this a dimmer adjustment for the connected fixture
Answer:	The light setting can be used to keep the switch from turning on if the ambient light is above the set level. For example if you use this switch on a patio or lanai and only want the motion to turn on a light if it's dark outside; you would turn this dial all the way and then slowly back it down until the light comes on at the ambient light level you desire.

Product features

TOPGREENER TDOS5 PIR Motion Sensor Switch, 2-PACK, White

The TOPGREENER TDOS5-W combines occupancy and vacancy sensors into one motion sensor switch for energy efficiency, security, and convenience. The 2-in-1 motion sensor detects occupancy and vacancy in a room to automatically turn lights or fans on and off. Enjoy hands-free convenience by never having to fumble in the dark looking for the switch. Give yourself one less thing to worry about by having the peace of mind that your lights will always automatically shut off.

A neutral wire is required for this switch to operate correctly.

Energy Savings

Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights accidentally left on all day.

Security & Safety

The TDOS5 is the ideal choice for seniors, children, and employees when it comes to safety. Making sure lights automatically turn on allows occupants to see where they are going, improves visibility in an otherwise dark room, and prevents accidents. PIR motion sensors turn lights on, allowing security cameras to capture clearer footage of your home or office.

Convenience

Keep it hands-free as you walk into your home with groceries or into the laundry room or closet with a handful of laundry without having to manually turn your lights on or off.

Custom Settings

With advanced technology packed into intuitive and easy-to-use settings, you can easily adjust the length of time lights will stay on or how sensitive the sensor is to motion. Make your home smarter in one switch!

Occupancy (OCC) Mode: Detects occupancy and vacancy in a room for full automation of lights, fans, or other loads. The sensor will automatically turn On/Off when triggered by motion. When no motion is detected within the delay time, the lights will turn off automatically.

Vacancy (VAC) Mode: Detects vacancy in a room to automatically turn lights off. Lights are manually turned on when entering the room. When no motion is detected within the delay time, the lights will turn off automatically.

Product description

Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turns the lights on when you enter the room and off when you leave
• Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
• Optional: senses daylight so lights do not turn on when there is enough natural light in the room
• Programmable time-out of lights - 1, 5, 15 or 30 minutes
• Works with all bulbs types; up to 250-Watt incandescent, halogen, electronic low voltage 200-Watt magnetic low voltage 150-Watt CFL/LED 2 Amp ballasts
• Single-pole only; great for small rooms like kitchens, laundry rooms and closets
• Installs in as little as 15 minutes; no neutral required
• Includes maestro sensor switch; coordinating wallplate sold separately

User questions & answers

Question:	How do I know if I need this 250W or the similar 600W switch? Are they interchangeable
Answer:	Depends on use. Lights and Ceiling fans, 250w is fine. If you have a Electric ceiling heater That requires more watts, then the 600w I would use. Hope this helps.
Question:	Will the motion sensor be set off by a small (toy size - 10 lbs) dog
Answer:	I have mine installed in a small walk-in (6 ft x 5 ft) closet and my 10 lb cat triggers it all the time, kind of annoying when it happens at 1 am. I just close the door to preven this from happening.
Question:	Will this work as... Enter room and I manually turn on the light and then the unit automatically turns off the light after a set time of inactivity? I only want it to turn off the light
Answer:	Follow up question on the previous answer....So if the unit turns off the light, is the actual switch toggled back to the "off" position? So that the next time someone walks in the door, they have to again toggle the switch back to the "on" position?
Question:	I don't get the,"No neutral required." A neutral is always required. What am I missing here
Answer:	I was an electrical engineer for Lutron back in the 1980's. Many dimmers and electronic switches like this one do not require a neutral wire to work. This is not a mechanical switch but an electronic one. It uses a silicon switching device called a triac which turns the light on and off 120 times per second, just like every dimmer ever made. During the brief period 120 times/second when the triac is off, the device draws a small amount of power through the light bulbs it controls, and uses this small amount of power to charge a capacitor, which you can think of as a rechargeable battery. Thus there are many wallbox products, such as most dimmers, that do not require a neutral wire to operate. Nor does it put any power intentionally to ground, which would be against the electrical code and thus could not be sold. The reason other companies require a neutral wire is because they were not designed by companies that also make dimmers as their engineers probably do not realize the device can be designed to draw sufficient power using a triac instead they use a relay, which would produce an audible click when switched on, where as a triac device would make no sounds when turning on and off. Hope this helps.
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Lutron Motion Sensor Switch

Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy and add simple automation to your home.

Garage

Lutron sensors are great when your hands are full and you can't easily reach the light switch.

Laundry Room

It's laundry day and clothes are piled high. Sensors installed in the laundry room gives you one less thing to worry about.

Kids Bedroom

Do you have forgetful children? Install a motion sensor and never worry about your kids leaving the lights on again.

• 【MOTION DETECTOR】-Smart Motion Sensor Wall Lamp,Auto-on within 10 feet, Auto-off After 15-18 Seconds of no Motion Detected .It Will Turn on Only When It is Dark and When Motion Is Detected.
• 【INSTALLATION METHOD】-Wall surface mounted,Hard wiring,led driver build inside,no need to hole to recessed,please make sure the size suitable for your wall before purchase.
• 【TOP QUALITY】-The Whole Lamp is Made of Aluminum, 1Ib Heavy Duty Texture,Function More Advanced.5W LED will satified with our normal daily lighting requirements,moreover energy saving and Environmental protection,life up to 5000hours.
• 【SUITABLE PLACE】-Living room,dinning room,bathroom,bedroom,hallway,corridor,pathway,stair. showcase ect. best lighting decor for home,hotel,resturant,KTV.
• 【PACKAGE INCLUDE】-1×Motion sensor light,and other installation accessories..We are confident in our attractive, innovative lighting, so all of our products come with a 1-year product warranty.

User questions & answers

Question:	Does this wall lamp require a light bulb? If not, what is the equivalent watt
Answer:	Yes they only light color when it is dark.
Question:	Do you think it’s possible to run these via a 5 watt usb connection if I wired a usb cable to it
Answer:	No there isn't a way to do that
Question:	The connecting wires are blue and brown which goes to the black wire and which to the white wire when connecting to power
Answer:	No they not be attached together. I am a bit disappointed, they do not stay on long.

Product features

The profession from the devotion. Hisoo LED flush mount ceiling light bewamf is your best choice for cost performance.

After through the long corridor, you don’t need to come back and then turn off the lights; Going to the laundry room, the light can automatically turn on when you hold the clothes basket; In the dark basement, you don’t need to be afraid of not finding the switch...

Our sensor lights indoor has a sensitive sensor, which automatically lights up when the sensor is activated ON and lasts for 30S/120S. It is suitable as hallway light fixtures ceiling, laundry room light fixtures ceiling, basement lighting fixtures; When turn off the motion sensor, it could to be used as a normal bedroom ceiling lights, bathroom ceiling light fixtures, kitchen light fixtures. You can choose different color temperature through the external wall switch to adapt to different places or atmosphere.

Hisoo is committed to providing customers with better products and better shopping experience. Each product is delivered after factory test to ensure product quality. Our products are guaranteed for 2 years. If you have any questions about our lamps, please feel free to ask our shop!

SPECIFICATION

• Rated Load: 18W 1600LM
• CCT:3000K/4000K/6000K(adjustable)
• Detection Range: 120°/ 360°
• Detection Distance: max 20ft
• Lighting time:30sec/120sec
• Installation Height: 1.8-2.5m Wall Mount/ 2.2-4m Ceiling Mount
• Certifications： ETL/ CE / ROHS

CCT SWITCH

123 Position: 3000K(Warm white)/4000K(Cool white)/6000K(Daylight) change Manual.

4 Position: Change via turning ON/OFF wall switch. Switch the LED Ceiling Light off and on again repeatedly until the desired color temperature is achieved.

CRI 85+

Up to 85 CRI color rendering, restoring the most real color of objects and creating perfect lighting for home and office.

INSTALLATION

1.Switch off the power, remove the lampshade.

2. Pass the wire through the hole in the bottom and connect the power wire into connection-wire column. Install the sensor light in the position where you need it with inflated screws.

3. Switch on power.

INSTALLATION ADVICE

As the detector responds to changes in temperature, avoid the following situations:

• Ø Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors etc.
• Ø Avoid mounting the detector near heat sources, such as heating vents, air conditioning units, light etc.
• Ø Avoid pointing the detector towards objects that may move in the wind, such as curtains, tall plants etc.

Bedroom

Dining room

Kitchen

Cloakroom

Corridor

Laundry room

INHDBOX LED Motion Sensor Wall Light

• Motion sensor wall light
• Lamp body is made of high quality die-cast Aluminum, more beautiful and smooth.
• This lighting fixture provides vivid and awesome light image to your home and your store, perfect for lighting and decoration purpose.
• No-dimmable led light ,Can save more than 90% of power consumption. Safe and long life service.
• Led driver: with short circuit protection design, over load protecting design to make sure it is completely safe to use.

INHDBOX Montion Sensor Wall Light More Application

• BATTERY OPERATED-URPOWER motion sensor light is powered by 4PCS AAA batteries(Not included)which saving time on pulling and charging.
• AUTOMATIC SENSOR-With passive infrared technology, it can be detected by the motion of human in the dark within 10 feet.Tip:This light will not turn on if the light is placed in a bright environment.
• SUPER BRIGHT CLOSET LIGHTS-With 10 LED in each light, which can light up with a good amount of light.High-quality materials and energy-saving design ensure that your lamp has an ultra-long service life.
• EASY TO INSTALL-No tools, screws or nuts needed. Stick-on anywhere.With magnetic strip.
• WIDELY USED-URPOWER motion sensor light is perfect for your cabinet, closet, cupboard, attic, drawer, garage, vanity mirror, workstation, kitchen, stairs, wardrobe and so on.URPOWER motion sensor light will fill your life with light and safety.

User questions & answers

Question:	So it’s only one unit for
Answer:	Thank you for your question! The diameter of the base of this Solar Flameless Candle Lantern is 6.5". The LampLust Team
Question:	Is it waterproof
Answer:	I got a dud too. I was going to return it however I never did.
Question:	If this is mounted horizontally, how do you remove all 4 batteries when needed
Answer:	Thank you for your question. For the "Set of 2 Indoor and Outdoor Solar 11" Black Metal Flameless Lantern (Battery Included)" the glass panels are on the sides of the lanterns.
Question:	battery life
Answer:	Thank you for your question! The "2 Black 11" Solar Lanterns with Ivory Resin Candles, Warm White LEDs, Indoor/Outdoor, Batteries Included" do not have a timer function. They are solar operated, so they charge throughout through the day and turn on at dusk.

Product description

With AMIR Motion Sensor Lights, you can…

- Say good bye to bumping into stuff in the dark.

- Comfort kids who are afraid of the dark

- Cheaper to run than ceiling lights



AMIR Motion Sensor Lights act like little “guardians”, provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.



With easy installation,it mounts in seconds. No hammers, drills, or tools required. Simply use the double-sided adhesive pads or stick to any metal surface with the built-in magnet.



Note:



1. Please kindly check whether the batteries have been installed in the correct direction.

2. This light can only be turned on in darkness environment. The light won't turn on if the light sensor has been detected by the enough light.

3. If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

4. The sensor light might not work if you use the infrared heater in winter. The infrared will cause failure of the sensor. However, the light will get back to work in 30 minutes after turning off the heater.

5. Please clean the wall surface to keep it dry and clean, so that the double-sided adhesive pads can be pasted tightly.



Specifications:

1.5v, 0.3w

Sensitivity: 3 meter Distance

Sensor Range: 120 degrees

Operating temp: -20°C-40°C

LED Qty: 6 LED

Light color: Pure White

LED life: 50,000 hours or more

Mounting: Tape or Magnet

Product Diameter: 3.15 in

Thickness: 0.87 in

Package includes:



6 x Motion Sensor LED Night Light

6 x double-sided adhesive pads

1 x User Manual

• Super-bright LED Bulbs - Up to 20 Lumen output, 6 pcs super bright SMD 2835 LED; bright enough to make sure you never stumble in the dark
• PIR Motion & Light Sensor - Auto-on within 10 feet, auto-off after 15 seconds of no motion detected helps prolong battery life. It will turn on only when it is dark and when motion is detected
• Easy Installation - Simple to install, no hard-wiring. With adhesive pads and built-in magnet, you can stick on anywhere you like
• Battery Operated - Powered by 3PCS AAA batteries (not included) for coreless installation. To provide you with illumination in areas that have limited or no access to electricity
• Note: This light can only be turned on in darkness environment. It won't turn on if the light sensor has been detected by the enough light. And Please DO NOT install this light in high temperature place, otherwise, high temperatures will affect the adhesive strip, and then the light will slide easily!!

Product features

AMIR Motion Sensor Light

AMIR Motion Sensor Lights act like little 'guardians', provide automated, hands-free way to protect your homes indoors and outdoors. Light up your bedroom, stairs, hallway, closet, or entryway to your home where the light switch is just too far from the door. Don't leave lights on needlessly running up the electric bill.

Here are some notes for you when you use it :

Here are some notes for you when you use it :

- Please make sure that the anode and cathode of battery has been installed correctly.

- Please do not install 2 lights too close. One of them effected by the other may not work.

- If you use Alkaline battery first and then change to zinc-manganese dry battery, the lights might not work as the zinc-manganese dry battery is shorter than the Alkaline battery.

• BUILT-IN MOTION SENSOR & DUSK TO DAWN SENSOR：FTL 9W A19 E26 outdoor motion sensor light bulb can detect human or animal’s movement within its detection range. The dusk to dawn led motion sensor light bulbs only turn on when motion is detected if surrounding brightness is less than 15lux, so they will not turn on during daytime. If motion keeps be detected, the motion light bulb keeps lighting up. Motion disappears, the motion light bulbs will turn off automatically after 30 seconds.
• LONG LASTING: this dusk to dawn light bulb with motion sensor lasts up to 30,000 hours. It consumes only 9W, equivalent to 60w incandescent bulb. If any problems while using this motion activated light bulb , please contact us through Amazon directly. We assure you a 2-year warranty.
• EASY TO INSTALL: standard E26 screw base, the motion sensor bulb is easy to replace your existing bulb directly, just plug and play. Remember to turn off the power before installation. To make the motion sensor outdoor light bulb works, please keep the switch on after installation.
• Compared with PIR infrared sensor light bulb, our motion sensor light bulb’s sensing distance is longer, sensing angle is wider. Our motion sensor light bulb can penetrate glass, walls, much more sensitive and more penetrating than infrared sensor bulb.
• WIDELY USED: the motion detector light bulb can be widely used for indoor/outdoor lighting, a great security lights for outdoor, ideal to use in front/back door, porch, garage, stairs, garden, yard, hallway, basement, closet, warehouse.

User questions & answers

Question:	Do these come in soft white
Answer:	Approximately 1 inch

Product features

Why to choose FTL Lighting

FTL 9W Led dusk to dawn outdoor motion sensor light bulb is a perfect and affordable alternative to the standard 60w incandescent bulbs. IP20, ideal for front/back door, porch lighting, garden lighting, pathway lighting, garage door lighting. It will exceed all your expectation on color reflection and photocell sensor performance. Each bulb offers a lifespan of 30,000hrs, saving your time and cost on replacing lamps.

Easy to Install

The dusk to dawn mnotion sensor light bulb has standard E26 base. You just need to screw the bulb into any standard E26 light socket or fixture. No additional dusk-to-dawn sensor fixtures required. No timer needed.

Please notice :

*Turn off the power before you install the bulb.

*The bulb is Not Dimmable. It can work with AC110-130V.

Insatalltion Guide

The motion light bulb should be put downward, or the motion sensor can not work. And it's better not to put the bulbs in a enclosed fixture cause it will shorten the lifespan of bulbs.

Parallel Mounting

When parallel mounting, keep at least 5M/16.4ft between two bulbs in case of mutual effect.

Please notice :

The motion sensor bulb is Not Waterproofing. If you use it outdoors, please use it in a place or with a lighting fixture that can protect the bulbs from water.

Motion Dectector Light Bulb Outdoor

Outdoor Lighting: The motion sensor light bulb can be a security light for front/back door.

Motion Activated Light Bulb Indoor

Indoor Lighting: Installing the motion light bulb in your warehouse, closet, stairs, the bulb will automatically turn on when you walk in.

Motion Sensing Light Bulb Outdoor

This dusk to dawn light bulb with motion sensor is also suitable for outdoor lighting in Garage , Garden, Pathway, Driveway...

• Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under DAYLIGHT mode, the light could be motivated on all day long, and under the NIGHT mode, the light only could be motivated on at night. Humanization design to convenient variety house illumination
• Motion Activated Sensing Light: Built-in PIR infrared motion detector with 120 degree detection angle. Motion sensor activated LED ceiling Light instantly turns on when it detects motion from up to 20 feet away
• 300 LUMENS: Super bright, with 80 pcs bright & long life-span SMD2835 LEDs. It diffuses well in all directions also spreads a wider coverage 300sqft, frosted lamp cover designed to soften light illuminate, it will not make the eyes uncomfortable even suddenly lighting at night. Protect your lover and children from darkness and fear
• Energy Efficient Battery Powered Light: 4 D-cell batteries (not included) Our quality LED never needs to be replaced. It’s so efficient; you will get more than 6 months of light on one set of batteries. Kindly noted: We stick a blue film on the silver part to keep it clean, you can tear the blue protected film off before you used
• Easy to Install & Wide Application: Wire no need, quickly and easily install it in less than 5 minutes. TOOWELL wireless LED ceiling lights are great for lighting up closets, pantries, stairways, sheds, porches and storage rooms

User questions & answers

Question:	Can i turn off the motion sensor? could i install a led smart bulb in the unit so i can control it with my phone
Answer:	As long as there is movement the light will stay on.
Question:	If I were to use this in my bedroom would it turn on every time I turned over in bed? Is it too sensitive for a bedroom
Answer:	It does make a rather loud clicking sound when switched off and on. It depends on how far your roommate is from the light. Is it the same room?
Question:	How sensitive is the sensor? does it detect all motion? will it be triggered by the motion of a flag on windy days
Answer:	No it doesn't turn off on its own.
Question:	Can you adjust how long the light stays on
Answer:	I mounted one to the inside sliding closet door to light up lower shelves. I guess you could mount on the wall near the top of the door, obviously inside the closet, for a high shelf. Just make sure you can reach it.

Product features

Product description

TOOWELL 80 LEDs Motion Sensor Ceiling Light offers new innovative features in a modern design to provide safety and convenience anywhere in your home

The motion-activated battery light provides 300 LUMENS - Super bright, effective modern lighting solution. The brightest indoor light to easily light large closets, showers and sheds

Surrounding Awareness

Its unique diffuser spreads the light for a wider coverage area. The clean, modern design complements built-in Photocell sensor & infrared motion sensor.

Upgrade Two Modes Available: Photocell sensor can be turn ON or OFF. Automatically turn on when motion is detected from up to 20 feet away

Bathroom

Laundry

Entrance

Stairs

Installation instructions：

1.Twist the back cover of the light counter clockwise to open

2.Use the included mounting hardware to install the back cover on a wall, ceiling or anywhere you want

3.Insert batteries into the battery container of the light

4.Turn the light body clockwise to fasten it with back cover tightly

Wardrobe

Package Contents:

1 x PIR Motion Sensor Light

1 x User Manual

Front door

Caution:

1. Upgrade Two Modes Available: Photocell sensor can be turn ON or OFF

2. Battery Required: 4 D-cell batteries (not included) Only use batteries of the same type, don't mix alkaline , standard ( carbon-zinc),or rechargeable (nickel-cadmium)batteries

3. Do not mix old and new batteries Product information

• PIR Infrared Motion Sensor - PIR infrared motion sensor is at the top of the bulb, the motion detector works like a small electronic eye that detects infrared waves—heat waves that radiate from moving objects. The LED light bulb turns on automatically once movement is detected within 12 - 18ft. It shuts off 30 seconds later after no activity in the detecting scope. No need to switch on/off physically, smart bulb frees your hands.
• Dusk to Dawn Sensor: Built-in a photocell sensor, the smart bulb automatically turns on at night (≤ 25lux) when movement is detected and off during the day (≥ 45lux) even with motion detected. It only turns on when the ambient light is dark, avoids unnecessary work in the daytime or when the ambient light is bright. The energy-efficient design avoids wasting of electricity.
• Lasting & Energy Saving - With Aluminum heatsink to make sure that the heat comes out from the Lamp. This LED bulb lasts 10x longer than incandescent and 4x longer than halogen bulbs, saving you the cost of frequent bulb replacement. 10W equivalent to 60W traditional light bulb, providing 806lm saving 83% energy, the same enjoyment, sharply decrease your electricity costs. Bulbs are compatible with any standard E26 socket and recommended for Indoor use.
• Comfortable Lighting - This A19 led light bulb offers Soft White and comfortable lighting with high CRI 80+ (color rendering index); At 2700K these bulbs deliver bright. It only lights up in the detective range at night or in the dark environment, energy-saving, environment protecting and long life, can be used in stairs, hallway, bathroom, front door, storage room, garage, closet, balcony, gate and so on. We suggest the bulb should be installed downward and no higher than 8 feet.
• Safety & Reliable - Our Dusk to Dawn light bulb meets UL-Listed E33485, RoHS, FCC for outstanding quality. No flicker, no flash, No lead/ mercury/ UV / IR, that’s designed for the comfort of your eyes. We uphold the highest standards for all our products by testing each product for optimal performance and safety. The hassle-fee 3-year unlimited warranty provides you with our excellent after-sales service.

Product features

Better Choice, Better Experience.

The AmeriTop Motion Sensor LED Light Bulb is very convenient in home life, it will light up automatically while the motion light bulb detects motion in the detective range in the dark. Put the Energy efficiency and functional lighting together, light your path brighter, and to create better lighting environment.

UL-Listed E33485, RoHS, FCC; No flicker, no flash, No lead/mercury/UV/IR, that’s designed for the comfort of your eyes.