13 best pumps and filters

Product description

The Intex 3,000 GPH Above Ground Pool Sand Filter Pump w/ Auto Timer provides cool, refreshing, clear water, and less hassle every swim season. If you are tired of buying and replacing pool filter cartridges, this filter is the one for you. With virtually no maintenance, your sand pump only needs replacement every five years. This sand pump features a powerful motor, 6-function control, and a built-in automatic timer. It meets the UL standards and is an excellent upgrade to the filter cartridge system on your Intex Above Ground Swimming Pool. This filter works with pools with easy set, metal frame, and ultra frame, up to 19,600 gallons. Simple to use and easy to operate, this Intex sand filter will outperform your standard cartridge filters and keep your pool crystal clear.

• Pump flow Rate: 3000 GPH. System flow Rate: 2, 450 GPH
• 6 function control - enables pool owner to filter, backwash, rinse, recirculate, drain & close system
• 24 hour automatic timer
• The strainer basket provides easy-cleaning, and prolongs the life of the sand.
• Hydro aeration technology is incorporated into the filter pump for improved circulation and filtration, improved water clarity and increased negative ions at the water surface

User questions & answers

Question:	funciona para piscinas enterradas
Answer:	No es solo para piscinas arriba de la tierra.
Question:	Have 15' pool, what size of the pump I should get
Answer:	Pool should be cycled twice daily. Pump should be big enough to cycle the total gallon capacity twice within a few hours
Question:	I’m looking at getting the 12” model for a small 14 round pool. Does the sand filter come with sand? What size are the hose connections
Answer:	No, sand is not included but it is pretty inexpensive. The hose size is 1 1/2
Question:	Can you use this pump for a Coleman pool
Answer:	I have a 22x52 Coleman pool. Hooked right up with hoses come with it! Had it hooked up in 30 minutes or so.

Product description

Intex Krystal Clear 1200 GPH Sand Filter Pump - Model 26643EG Brand New Krystal Clear Sand Filter Pump. Intex's Sand Filter Pumps use a powerful 0. 25 horsepower motor to achieve a 1200 GPH water flow rate (1050 GPH System Flow Rate). Best suited for Intex above ground pools with a 16 ft diameter or smaller. The pool owner is able to easily operate the unit in 6 modes: Standard Filtration, Backwash, Rinse, Re-circulate, Drain and Close. Sand Filter Pumps are the lowest maintenance option, requiring sand replacement only every 5 years on average. Sand Filters represent approximately 38% of pool filtration systems, compared to 27% for Diatomaceous Earth (DE) systems. Sand & Cartridges filters are growing while DE filters are declining due to the increasing number of municipalities that are banning them. Timer Feature- Set the timer to the desired operating hours. 2, 4, 6, 8 or 12 hours. Turn the pump on by pressing the timer switch. The filter pump will filter the water and stop after the operating hours are complete. The built-in timer will operate for the number of hours selected automatically at the same time each day. Operating hours can be re-adjusted if necessary. The pump can also operate continuously by pressing the "l" on switch. Sand Filter Pumps offer genuine advantages to pool owners: Ergonomic handle for easier operation Heavy duty 10" tank 26 lb sand capacity 18 lb glass capacity Durable pump enclosure for more protection Pressure Gauge Includes 1 Intex Krystal Clear 1200 GPH Sand Filter Pump - Model 26643EG - 110-120 Volt GFCI 2 - 1 1/2" diameter hoses 1 - Instruction Manual 2 Year manufacturer's direct

• Pump flow Rate: 1200 GPH. System flow Rate: 1, 050 GPH
• 6 function control - enables pool owner to filter, backwash, rinse, recirculate, drain & close system
• 24-Hour automatic timer
• The strainer basket provides easy-cleaning, and prolongs the life of the sand.
• Hydro aeration technology is incorporated into the filter pump for improved circulation and filtration, improved water clarity and increased negative ions at the water surface

User questions & answers

Question:	Can this be used on a 12x33 inter pool
Answer:	Would be a little small I would step up to the 12"
Question:	Will the 10in be ok for a 18x48 summer waves pool
Answer:	No I had a 10" for my pool that size that's why I upgraded to 16" and it is perfect!
Question:	Why is this product being aloud to be sold for more than double the manufacturer’s sale price of
Answer:	Price gouging
Question:	Would there be a problem using it on a 1900 gallon pool
Answer:	No. A little overkill but you wouldn't have to run it very long each day, It can be set to run from 1 hour to 12 hours a day or can be run constantly or manually on and off. And you would have the sand filtering which is very nice.

Product description

As America's favorite brand of reverse osmosis systems, and backed by iSpring’s industry-leading customer support, the RCC7P-AK is unequaled in quality, performance, and durability. The system consists of 6-stage, layered filtration built around precision reverse osmosis (RO) technology that removes over 1000+ different kinds of contaminants in order to provide the best home drinking water filtration available.



Unlike some other systems, the combination of both GAC and CTO filters in the 2nd and 3rd stages provides greater protection against harmful chemicals than CTO alone. It features a 75 gallon-per-day capacity RO membrane, which is larger than most in its class and provides the capacity to economically handle the drinking water needs of even a large family.



The RCC7P-AK model of the iSpring RCC7 line of products is equipped with a booster pump for situations where inlet/house water pressure is low – below about 40 PSI. Reverse Osmosis requires high pressure to force the impurities out of the water. If the pressure is too low, the process will not be efficient. Adding a booster pump where the inlet water pressure is too low solves this problem by ensuring optimal pressure to the RO membrane at all times. Pure water can be produced more quickly with less water loss. The booster pump operates nearly noiselessly and only when needed. Usually it can barely be heard over normal kitchen activity.



After flowing through the initial 5 stages of the iSpring RCC7 line of Reverse Osmosis filtering products, the RCC7P-AK model also adds another Alkaline Remineralization (AK) stage. This stage is designed to restore the natural alkalinity and mineral balance of the water. The RO process effectively generates pure water but it also removes a few helpful minerals in the process. The red mineral stone portion of the AK filter adds back healthy minerals including not just calcium, but also other beneficial minerals, like magnesium, that other systems don't. The calcite portion of the filter neutralizes the pH of the RO water. And the water tastes better too. Because RO water is so pure, many people find it tastes unnatural. Many people prefer the more natural taste that comes from the presence of some minerals in the water. Remineralization restores just the right proportion of healthy minerals.



Designed for do-it-yourself installation by most users, the entire system fits nicely under a standard kitchen sink. Installation is straightforward and all parts necessary for installation are included. You are guided by clear, well organized written instructions, instructional videos and access to iSpring’s unparalleled technical support.



The system is quiet and low maintenance. Replacement filters are standard sized and sold at factory direct pricing. A lead-free, solid brass faucet with brushed nickel finish is included with the system and is usually mounted on the counter as the primary source of drinking water, but output lines can also be connected to your ice maker, coffee maker, etc.



The whole system is backed by a 1-year money-back guarantee, a 1-year manufacturer warranty and iSpring's unique lifetime technical support provided right here in the USA in Alpharetta Georgia. With the RCC7P-AK, enjoy crisp-tasting, bottled quality water, every day, right in your home.



Incoming Water Pressure: 30 PSI - 70 PSI

Operating water temperature range: 40 – 100 °F

Maximum TDS: 750 ppm

• Reverse Osmosis requires high water pressure to force the impurities out of the water. RCC7P-AK’s extremely durable electric booster pump ensures high efficiency, reliable, and consistent performance regardless of pressure variations; delivering the highest performance for an RO system with less waste water.
• High Capacity Reverse Osmosis water filtration for safer, healthier water. This under sink mounted water filter and water softener removes up to 99% of over 1, 000 contaminants, including lead (removes up to 98% of lead), chlorine, fluoride, arsenic, asbestos, calcium, sodium, and more.
• The RO membrane removes not only harmful pollutants but also a few helpful minerals. As a result, a standard 5 stage RO system produces slightly acidic water with a pH of 7. 0 or below. The iSpring RCC7P-AK includes an additional sixth stage - an Alkaline Remineralization filter which restores healthy minerals and produces a balanced alkalinity, which gives the water a more natural taste than regular 5 stage RO water.
• WQA Certified System with Premium quality components ensure highest reliability and low maintenance for many years to come. Clear see-through 1st stage housing makes filter inspection a snap. Pump power adapter: 100-240V 50/60Hz
• For indoor use only. Extended Manufacturer upon registration, support from Atlanta GA USA

User questions & answers

Question:	Is the pump always on, and can you hear it. Our living room is next to the kitchen and the background noise might be irritating
Answer:	The pump only runs when the water pressure in the tank drops to a preset level then shut off when the pressure is back up. I have mine off the bedroom in a cabinet and I have to touch the pump to make sure it is running. The pump make a slight noise when it start up for maybe a second or two. But after that you have to touch the pump to make sure it is running.
Question:	Does this filter out fluoride
Answer:	It's quite simple answer. Molecule of water is bigger then fluoride's, and that why it can't be filtered out. There's no filter on earth that's capable of doing it. The only way to filter out fluoride is thru distilling the water. Because boiling temperature of fluoride is greater than the water's. Thereafter fluoride's molecules do not boil off during distillation.
Question:	I saw other brands have 10 stage ak/ph filter, is that better or just a gimmick
Answer:	I did a lot of research on this topic and I can state that it is not necessary at all. I don’t know the system and the stages that the system has but it provably has a UV lamp or so, it would be useful if you are using well water os similar as it can have a lot of bacteria, otherwise it doesn’t make any sense. Your body needs minerals in the water to be healthy for you and experts says that is good to have a slightly alkaline water (ph ~8). A very filtered water would be nearly to destiled water what is not good for you in any case. I’m very happy with this system as it fulfills all the needs and expectations I had. I may say that the pump is a nice to have to improve the rejected ratio. I did a test and in my case with this system the values are 1:3 rejection, ph 8.1, EC 40us/cm, 22ppm really close to my previous mineral botteled water but a little bit more alkaline. Hope that helps.
Question:	Permeate pump v.s. booster pump, which one is better
Answer:	A permeate pump does not increase the feed pressure at all. It decreases the back pressure against the membrane in Pressure tank systems, the pressure it applies is not consistent. However, For open water storage systems and for incoming water pressure over 60psi, it's a waste of money. In those types it doesn't do anything to drain ratio and production speed. The booster pump on the other hand is almost a mandatory accessory if your water pressure is below 50 PSI or drops below 50F. At these feed water conditions, the RO unit is very inefficient and will not perform well. The booster pump will increase the feed pressure for ro unit to 80 psi regardless of back pressure. It will dramatically lower the drain ratio and speed up the water production.

Product features

Precision Performance

The RCC7P-AK is a pressure-boosted, multi-layered filter system that provides optimal protection against over 1,000 different types of contaminants, including arsenic, asbestos, chlorine, fluoride, lead, mercury, sodium, and more. Boosting the water pressure improves the performance of the Reverse Osmosis filter stage increasing water production speed and reducing waste water. This is essential when the home water pressure is low (below 40 PSI).

Reinforced Transparent 1st Stage Housing

Provides an easy way to visually inspect the sediment filter and view the contaminants being removed from your water. With the transparent housing you will know it is time for a filter change before a problem occurs.

Finest Micron, Layered Protection

The advantage of having both 5-micron GAC & CTO filters is that loose carbon (GAC, KDF) is better at trapping large contaminants, leaving only smaller ones to the CTO carbon block filter. This allows the CTO filter and RO membrane to function at their maximum efficiency and last longer.

Leak-Free System & Online Supporting Videos

Push to connect fittings and color coordinated tubings simplify the installation process. We know that high percentage of our customers prefer Do-it-yourself installation. We are investing in video production to provide our customers the resources needed to have successful installation and maintenance.

Tech Support

Contact our support team for assistance in selecting the right system for your water filtration needs. Now, and years from now, we will be right here and ready to help.

Product description

This Pondmaster Pump and Filter Kit is the easy and practical way to match a pond filter to the right pump and fountain head for smaller ponds. The kit includes a pump with filter and waterbell fountain head. Ideal for smaller ponds including deck ponds up to 200 gallons. The pump uses only 15 watts of electricity and is equipped with a 10 foot power cord. The filter provides mechanical and biological filtration.Once the unit is not completely submerged it will hum and buzz, once fully submerged it should be quiet

Buying pond components piecemeal means you have to know which components are compatible--a tricky proposition for the novice water gardener. This kit packages together the pump, filter, and nozzle so you get it right the first time.

Designed for smaller ponds up to 200 gallons, the pump moves 190 gallons of water per hour for healthier plants and the gentle murmur and ripple of water. The filter keeps larger debris from clogging the pump, and offers biological filtration to convert nasty pathogens into useful nitrates for plants. A waterbell fountain head casts a bell-shape spray across the pond. What's in the Box

190-gph pump, filter, fountain head, 10-foot cord.

• Highest quality materials used to make high-end aquatic supplies
• Provide the best environment for your aquatic life with Danner products
• 100% designed and made in the USA with quality goods
• Country Of Origin: China
• Pump and filter kit with waterbell fountain head
• 190-gph pump for smaller 200-gallon ponds and deck ponds
• Powers with just 15 watts of household current; equipped with a 10-foot power cord

User questions & answers

Question:	I have a small pond with lily pads and lots of foilage in the water - do you think this would work without getting clogged
Answer:	This should work in your pond.
Question:	how difficult/often change filters
Answer:	Very easy to change filters and they seem to last a while, still on my first set months later. Unfortunately, if you have any problems with this pond pump even if due to the manufacture and it's still under warranty, you pay the shipping both ways for any repairs and it can get expensive.
Question:	Is the complete filter set like are all the parts here? If not what else must i get for my outdoor pond
Answer:	Your question is not real clear to me. The pond master filter will do the filtering job for a pond of 250-300 gallons. If there is a lot of sunlight on the pond you Will still have an algae problem. A ultraviolet filter not chemicals is the solution for algae.
Question:	My pond is 20 inches deep. Will the fountain head rise above the water level? Is it tall enough for my pond
Answer:	I would recommend against buying this product. After the third one failed I just ate it and stopped asking Amazon for replacements. The impeller lasts for about 2 to 3 weeks and then fails. We had to put it on some rocks to get it up high enough above the water but our pond is about 28 inches deep so I can't say for sure that it will rise above 20 inches.

Product features

A History of Excellence

Ever since our modest beginnings, Danner Manufacturing, a family-owned and operated business, has developed and produced innovative products for hobbyists and professionals alike. Eugene Danner Sr. started planting the seeds for Danner Manufacturing in 1934 while working in the cellar of his home in Brooklyn, New York. While holding a full-time job as a factory manager, Eugene found great pride in creating the Danner business on his time off from his regular full-time job duties.

Improving the Art of Fluid Motion for Over 80 Years

The brands which we manufacture and market are Supreme Aquarium, Pondmaster, ProLine, Supreme Hydro, Pool-Care, and Pondmaster ECO. These brands can be found in the Aquarium, Water Gardening, Pond, Pool & Spa, OEM, and Hydroponic industries throughout North America and the offshore markets. We are committed to providing our customers with high quality and reasonably priced products, creating the best value.

Product description

Welcome to pond boss We specialize in the latest innovative and energy efficient water gardening products to help you create, maintain and enhance your own backyard pond, waterfall, or fountain feature. We take pride in providing you with durable, eco-friendly equipment including our low-water shut-off pumps, UV filtration systems, non-toxic water treatments, pond liners, accessories and so much more. We have been providing water garden products for over 10 years therefore, our experienced customer service department is always ready to assist you in building and maintaining your water garden or backyard pond

• Ecofriendly Filter kit
• Energy efficient
• Quiet operation
• Earth friendly
• Combined set costs less than purchasing filter, pump and nozzle separately

User questions & answers

Question:	Would this be good for a 250 gallon pond
Answer:	No. A bigger pump would be better.
Question:	Must you use the poles or can you use a tube for the fountain
Answer:	The poles need to be used at least as far as when the come out of the filter. After that you could attach tubing. This filter works very good.
Question:	will this work for my turtle in about 200-250 gal pond
Answer:	yeah it should be plenty of filtration.
Question:	How much does it cost to run pump per month
Answer:	Thanks for your question. The pump included is model# PF320 Which is rated 23 watts/0.4 amps. With a continuous 24 hour usage for 30 days you would use 16.56 kwh, at .10 per kwh (the national average) your monthly operation cost would be $1.66. If you need more help you can call Pond and Garden Depot toll free at 1-866-305-5459.Cody H.Customer Service

Product features

POND BOSS Filter Kit with Pump

pond boss Complete Filter Kit with Pump is ideal for use in ponds up to 500 gallons. The kit offers a simple, cost efficient way to start a pond and comes with an ETL listed, energy efficient 320 GPH fountain pump that circulates water. The patented sloped lid prevents accumulation of debris as well as two filter pads that collect small and large debris to reduce maintenance and increase pump longevity. BioBalls are utilized to provide more surface area to aid in growth of beneficial bacteria. It includes a waterspray nozzle head for aeration and decoration as well as a diverter valve so you can enjoy a variety of water displays.

Product description

Make a splash all summer long with the Intex Easy Set, one of the most easy to assemble pools on the market. This pool will make your backyard the place to be all summer as your family can relax and play. A 110-120 volt filter pump is included and is very easy to install- just hook up the hoses and enjoy clean refreshing water. Ready for water in 10 minutes, - simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun! Includes: SUPER-TOUGH laminated PVC sidewalls. 110 - 120 Volt Filter Pump with 330 gallon per hour flow rate. Set-up and maintenance DVD. Convenient drain plug that connects to a garden hose so water can be drained away from pool or house area. Water capacity: (80%) 639 gallons.Customer Support our 800 number at 1-800-234-6839 to work with us to resolve any issues.

• A 110-120 volt filter pump is included and is very easy to install- just hook up the hoses and enjoy clean refreshing water;Age Grading : 6+
• Ready for water in 10 minutes, - simply spread out on level ground, inflate the top ring, fill the pool with water, and enjoy the fun!
• Includes: SUPER-TOUGH laminated PVC sidewalls. 110 - 120 Volt Filter Pump with 330 gallon per hour flow rate. Set-up and maintenance DVD.
• Convenient drain plug that connects to a garden hose so water can be drained away from pool or house area. Water capacity: (80%) 639 gallons.
• New dual suction outlet fittings improve water circulation resulting in better water hygiene and clarity.
• Do not set up the pool on sand, mud, or any soft or loose soil conditions.; No of People: 2 to 4

User questions & answers

Question:	How much land space does this take up? More than
Answer:	When full of water, it creates an 8 foot circle at the base. It is very compact and true to size.
Question:	Can I have this in direct sunlight? My backyard has no shaded area
Answer:	NO. I had mine in direct sun and the top part that holds air cracked and dried up and only lasted a year.
Question:	What filter does the 8' model need its 530 gallon per hour one
Answer:	Yes at least the 530 gpm filter pump works just fine
Question:	Could a cat put a hole in the side
Answer:	It is fairly thick so I don't think a cat can put a hole in it. My German Shepherd jumps in and out with no problem and his is over a 100 pounds.

Product description

VIVOHOME's pond filter is designed for cleaning ponds. With adopted biotechnology to improve the quality of water. These bio balls promote gas exchange and increase dissolved oxygen levels, then filter the water as the bio-balls combine with organic waste to dissolve it. With 3 different nozzles, the fountan could show various water-spray patterns. Making a lovely centre piece to your little pond, the fountain adds motion to your garden.

• ADD MOTION TO YOUR GARDEN: Made of high-quality materials, this pond filter is waterproof and weatherproof; Its maximum flow-through is up to 2500 L/H, suitable for ponds of 1180 Gallons; This pond fountain is an elegant and eye-catching feature that help add air to the water and make a lovely centerpiece to your little pond
• IPX8 WATERPROOF PERFORMANCE: All the live parts of high-premium materials up to IPX8 standards, are sealed into the chamber with good waterproof and high insulation, which guarantee the endurance of this fountain filter; 33ft long power cord is UL certified for safe and stable use
• PREMIUM FILTER MATERIALS - Built-in filter sponge and bio-balls (Biological media) will make a double filter area per unit volume and provide maximum surface area for beneficial microorganism growth to help improve water clarity in water gardens and reduce maintenance; The indicator on the top tells you if the UV-C light is working
• 3 DIFFERENT WATER PATTERNS: Freely combine fountainhead with 3-type nozzles for various water-spray patterns, which allows you to change the way you want your fountain show to look; The pond filtration kit will not only keep this pond water clean but add a great deal of character to your pond
• BUILT-IN WATER PUMP: The fountain filter works through a built-in water pump, and the water flows into the filter after being filtered by a sponge and bio balls; Then the UV light can be used to kill harmful microorganism in the water, and then clean water is discharged out of the fountain; This pre-pump filter can also be used as a separate Submersible Water Pump

User questions & answers

Question:	Too big for a 125 gallon pond with maybe fish and waterfall feature
Answer:	I love this filter/fountain. I do not know the exact gallons of my pond but it has to be close to 125 and I think it works great. I have it hooked to a fountain and the water flow is perfect. I have 2 fish, a few plants and resident frogs and the water is clean and clear. It’s a little difficult to take apart and clean but I would definitely recommend especially for the price.
Question:	Does this have a diverter valve if you want to connect to a waterfall? The photos show it has but it’s not on the description
Answer:	Dear customer, Thank you for your message. There is a regulating valve on the side. Please contact us if you have any other questions。 Best wishes, VIVOHOME Customer Care
Question:	I have a 1000 gallon pond. Description does say this will work for this size. But im curious how well for this size pond
Answer:	This pond filter is suitable for 1180 gallon pond. Therefore, your pond is totally within the best performance range.
Question:	Does this have a way to run a waterfall along with the fountain
Answer:	Only if you hook up a tube to a separate pond.

Product features

VIVOHOME All-in-One Pond Filter with Water Pump and Fountain

Effective pond filtration is one of the must haves for a well-kept garden pond. This VIVOHOME's small pond filtration system help keep your pond water clean. With adopted biotechnology to improve the quality of water. With 3 different nozzles, the fountain could show various water-spray patterns. Making a lovely centrepiece to your little pond, the fountain adds motion to your garden

Know More about the Product:

Power: 54W

Power of UV light: 9W

Service life of UV light: 8000 hrs

Voltage/Frequency: 110-120V/60Hz

Max flow-through: 660GPH (2500 L/H)

Power cord length: 394 inch/33 ft

Suitable for ponds area: 1180GPH

About 36 Filter Bio Balls

These bio balls promote gas exchange and increase dissolved oxygen levels, then filter the water as the bio-balls combine with organic waste to dissolve it.

Built-in Sponge

Equipped with filter sponge, which can be replaced, that ensures the balance of water flow and the reproduction of nitrifying bacteria.

9W UV Light

Comes with a UV light, which inhibits the growth of brown algae and reduces water pollution and risk of disease for your fish

Product description

Intex Krystal Clear Cartridge Filter Pump for Above Ground Pools, 1000 GPH Pump Flow Rate, 110-120V with GFCI. Item Weight: 8.63 LBS, Package Dimensions: 15.20in x 11.00in x 11.00in

• Easy to use - simply replace the old cartridge with a new one every two weeks, Double insulated pump
• The number on the actual item seen in the image is 637R, is the component part number that corresponds to the individual part for the system and this does not pertain to the model # 56637EG.
• Air release valve for air trapped inside filter chamber.we do not suggest operating the pump for more than 8 hours per day
• Suitable for Intex pools up to 6,000 gal with 1.25in (32mm) diameter hose fitting
• Works with 15-feet Easy Set, 15-feet Metal Frame, or 18-feet by 10-feet Oval Frame pools. the hoses are 1-1/4 so if you need 1-1/2 you need an adapter.

User questions & answers

Question:	Im getting percolation in the hoses and canister is way low on water i shut power off and the canister fills again what up with that? thanks Steve
Answer:	Is there a little fitting on top of filter if so run pump with little top of until water comes out then screw back in
Question:	Which hoses are the intake and the output? The top or bottom hose
Answer:	Top hose is the intake, bottom is the output
Question:	Can I use this pump for Intex swim center family pool 120in x72in x22in
Answer:	I have the round 12' w x 30" h pool that came with the 530 gph filter pump that has 1 1/4" hoses and this 1000 gph pump was a direct replacement. No hose adapters were needed. I'm not exactly sure what the model number is of the 530 gph pump but the hoses fit perfectly onto this pump. All I did was plug the inlet/outlet openings in the pool with the plugs that came with the pool and swapped out the pump. Took 5 minutes. I found a lot of the reviews here confusing because some seemed to indicate that hose adapters would be necessary but that turned out not to be the case. I'm pretty happy with this pump. Works waaaay better than the 530 gph.
Question:	Does this filter come with hoses and what are the diameter of the hoses that it comes with
Answer:	Yes it does come with the hoses, clamps, filter, and everything that you need to use it. I am not sure of the diameter of the hoses. It works really well for a 14' x 48" pool.

Product features

Intex Filter Cartridge Pump

Keep your pool water Krystal Clear and refreshing this summer with the Intex 1,000 GPH Filter Cartridge Pump.

Product description

For the ultimate in convenience and quiet, choose a Whisper In-Tank Filter. These filters mount on the inside of the aquarium, rather than hanging from the outside -- making it possible to place the tank flush against a wall. In-Tank Filters are unusually quiet, since the motor is under the water. Offering the same quality and performance as an external filter, the Whisper In-Tank Filter will function in as little as 2 inches of water -- making it ideal for turtle tanks, or for creating a waterfall inside the tank.The Whisper In-Tank filter features adjusts easily to high or low water levels with mounting suction cups and/or bracket. Each filter comes with one pre-assembled Whisper Bio-Bag filter cartridge.

• UNIVERSAL DESIGN Tetra Whisper 10i Internal Filter is an all-in-one air pump and water filter system
• INTERNAL FILTER Mounts on the inside of your aquarium with clip (included)
• CATCHES DEBRIS Dense dual-sided mesh filters debris and fish waste
• AERATES WATER Air-driven design filters up to 80 GPH while oxygenating water
• CONVENIENT DESIGN Uses medium easy to change Bio-Bag cartridges filter mounts inside aquarium making it possible to place tank flush against the wall
• Age Range Description: all ranges
• Included Components: Whisper In-Tank Filter 10i (upto 10 Gal)

User questions & answers

Question:	Does this come with a filter cartridge
Answer:	Comes with the filter cartridge and bio-scrubber which works much better than previous models. I'm very happy with this filter. Have 2 turtles (that are very dirty) and it keeps my water crystal clear.
Question:	Would a small fish get sucked up in this filter? I have a 2 month old beta who is just recently getting color fins but still very small
Answer:	it would. Because the fish has to sleep. Unless you have a bigger tank, it will be sucked in when they fell asleep even if she is strong to swim away while awake. I would cover the water intake with filter mesh or unwanted nylon silk stockings
Question:	Where can I just get the Bioscrubber
Answer:	Hello. You can get it at a pet store, amazon has some, grocery stores with a pet section...they are pretty easy to find.
Question:	What size replacement filter cartridge for this unit...small, med
Answer:	The Tetra Bio-Bag Large (formerly known as Regular) are the exact same as the filter bag supplied with the Tetra Whisper In-Tank filter 20i. I got both from Amazon: filter $11.89; 12 cartridges $12.28. These filters last a long time, can be cleaned and reused. For my purpose, this filter has been great.

Product features

About Us

Tetra’s tradition of innovation started more than 50 years ago in Melle, Germany, where Dr. Ulrich Baensch founded the company (Tetra Werke) and pioneered the development of flake fish food - an innovation that revolutionized the industry. At the time, growing and harvesting food for your fish was a painstaking process. The advent of flake fish food not only made feeding your pet much easier. It opened the way for more people to own an aquarium. At Tetra, we’re dedicated to helping seasoned hobbyists and beginners alike enjoy a successful, life-long aquatic experience.

• 💦Sizable Capacity - This sand filter pump is housed in a one-piece 13-inch tank with a capacity of 42 pounds of sand that can filter above ground pools up to 10,000 gallons
• 💦Simple and Easy to Use - 4-way valve, 3-prong plug w/ electric cable, portable, quick start and simple operation, take less than 5 minutes to install
• 💦Low Noise Design - This sand filter pump is designed and optimized for running with low noise, to make your work more comfortable and energy efficient
• 💦Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient backwashing
• 💦Multi-Port Filter - Multi port provides for easy use and quick back-washing

User questions & answers

Question:	Horsepower of pump
Answer:	My particular pump is a 1.5 hp unit.
Question:	Will this work on a koi pond
Answer:	Probably to bug
Question:	Will this work with my intex pool
Answer:	Yes but you need to purchase additional Adopters for your hose
Question:	how many feet the corded electric
Answer:	Six feet

Product features

Sand Filter System

Sand Filter System - Pump and filter are perfectly engineered to provide optimum flow rates that promotes clean water quality

Low Noise Design

Low Noise Design - This sand filter pump is designed and optimized for running with low noise, to make your work more comfortable and energy efficient

Dependable Performance

Dependable Performance - This filter keeps the sand height level to expose water to the maximum sand surface level possible for optimum filtration, consistent performance, and efficient back-washing

Multi-Port Filter

Multi-Port Filter - Multi port provides for easy use and quick back-washing; These pumps are capacitor start (These pumps are capacitor start and not for use/sale in California)

XtremepowerUS Sand Filter Above Ground Swimming Pool Pump Media System

Sand Filter Combo for above ground pools. Fully integrated sand filter, pump pressure valve, and stand. 4,500 gallons per hour pumping capacity. 175 pounds per hour sand pumping capacity. Just add the filter media and hook up the hoses, plug it in and it starts filtering immediately

Filter Balls Media Chart:

Product description

The Bestway 330 gal. Flowclear Filter Pump is essential for pool owners to keep their pool water clean and hygienic over the summer months. The swimming pool filtration pump keeps clean water circulating by pumping it out of the swimming pool, through a filter cartridge and back again. Four hoses are included with Bestway pump and are attached to Four separate points on the swimming pool. The loose end of one hose is connected to an inlet on the filter pump and the end of the other hose is plugged into an outlet. Water is pumped out of the pool and through the inlet hose at a rate of 330gal per hour, before being sanitized by the filter cartridge and pumped back through the outlet hose. It then begins its journey all over again, providing clean, clear, hygienic water. The Bestway 330 gal. Flowclear Filter Pump comes with an installation manual to guide you through the simple set-up process. Recommended for use with 300-2,200 gal pools.

• CLEAN AND HYGIENEC POOL WATER: The swimming pool filtration pump keeps clean water circulating by pumping it out of the pool, through a filter cartridge and back again. Water flows through the pool pump at a flow rate of 330 gallons/hr.
• EASY INSTALLATION: Simply connect the hoses to the valves on the pump and pool and plug the electrical cord into the nearest outlet. No assembly gives you more time for fun!
• FILTER OUT THE SMALL DEBRIS: Filter cartridges are more effective at picking up and filtering down to 10-15 microns. This means the cartridge filter captures particles a sand filter wouldn't.
• EFFICIENT WATER FILTER PUMP: Cartridge filters don't have backwashing abilities, so don't worry about local regulations or water wastage! This pump efficiently uses the minimum water needed.
• IDEAL FOR ABOVE GROUND POOLS: Recommended use for 300-3, 800 gallon capacity above ground pools.

User questions & answers

Question:	What size filter for this
Answer:	The filters are i filters. Very hard to find in stock anywhere
Question:	Is this 1 1/4 outlet? And does it come with hoses and filter
Answer:	No es solo para piscinas arriba de la tierra.
Question:	What replacement cartridge is needed for this filter pump
Answer:	Pool should be cycled twice daily. Pump should be big enough to cycle the total gallon capacity twice within a few hours
Question:	What size or letter filters
Answer:	No, sand is not included but it is pretty inexpensive. The hose size is 1 1/2

Product description

Beat the heat and make a splash in this Intex 12 x 2.5 Foot Metal Frame Above Ground Pool and Filter. Keep your pool water fresh with the included cover for round frame, 12-foot diameter pools. At 12 feet wide and 30 inches in height, this metal frame pool is great for having friends and family over for to cool off. It's easy to assemble and maintain and fits perfectly on a flat surface in your backyard. It's made of strong and durable material, Intex's high-molecular Super-Tough PVC, which is highly resistant to damage from abrasion, impact, and sunlight. The pool set includes an Intex 530 gallon per hour filter pump, 1 Type "A" filter cartridge to keep your pool sparkly clean, and a helpful instructional DVD to help get you started. The included pool cover helps keep your pool free of dirt, insects and debris when not in use. Constructed of high quality, durable 7-gauge, UV resistant PVC vinyl, this pool cover features drain holes to prevent water from accumulating on top. It comes with nylon rope ties and a 10-inch overhang to keep your above ground pool covered and free from debris. Your backyard will be the hot spot on the block with this Intex 12 x 2.5 Foot Metal Frame Above Ground Pool summer after summer.

• EASY TO USE: An affordable 6 person pool that is an alternative to more complicated steel walled pools, and a more durable alternative to inflatable models. Easy to assemble, ready for water in just 30 minutes
• WATER CIRCULATION: Dual suction outlet fittings improve water circulation resulting in better water hygiene and clarity. This pool has a 1,718 gallon capacity
• DURABILITY: The wall PVC material is Intex's SUPER-TOUGH, high-molecular PVC which is highly resistant to damage from abrasion, impact, and sunlight; Dimensions (L x W x H): 144 x 144 x 30 inches
• PUMP AND FILTER INCLUDED: Included 530-gallon-per-hour filter pump helps keep your water sparkling clean; Filter is equipped with the Ground Fault Circuit Interrupter, which is an added safety feature that shuts off the pump if electrical current is exposed to water; Includes 1 type "A" filter cartridge
• POOL COVER: Pool cover is constructed of a high quality, durable 7 gauge (0.18mm) UV resistant pvc vinyl material, this pool cover features drain holes to prevent water from accumulating. The nylon rope ties and the 10 inch overhang keep this above ground pool cover where it belongs, fitting snugly in place across the perimeter of your pool

User questions & answers

Question:	Do you have to fill the pool up all the way? My son is not very tall, maybe about 33in. 30 in of water would be too deep for him
Answer:	No, I only filled it up part way for my grandchildren. I have owned one every year. Make sure you get a flat mat for underneath so you don’t get ockmorbgravelmtears.
Question:	Does it come with a pool liner included it does not state if its complete with one or must purchase separately
Answer:	Ground liner? No. Better in sand.
Question:	what part is metal?? is it only only the poles
Answer:	I have not opened it yet. I will open it come the summer. Sorry.
Question:	is there a pool cooler available
Answer:	Yes

Product description

If your water supply is from a well or the water supply pressure is below 50 psi, then it is recommended that you add this pump kit to your RO system setup to increase the water supply pressure to 60 to 80 psi range to optimize the performance of your RO system. PLEASE MAKE SURE your RO system is in working condition, and it can make water and turn on/off correctly. If your RO system is not working correctly or not making water, then you need to fix the RO system and replace filters. This pump is not able to fix a non-working RO system. Quiet operation, 1 year factory warranty. Made in USA pump and pressure switch.

• This pump kit includes Aquatec pump 6840-2J03-B224 with heavy duty steel base plate with damper, PSW-240 pressure switch, transformer 110V USA plug, 1/4" inlet/outlet for pump and pressure switch, detail instruction
• This pump is designed to increase the water supply pressure to a RO water system. Increase input pressure from 30-40 psi to 60-80 psi depending on the capacity of your RO system. This pump is good for under 100 GPD (gallons per day) RO systems Most home drinking RO systems are under 100 GPD
• Automatic ON/OFF operation. The pressure switch would sense the pressure in the output line, so when the output line is shut off or the storage tank is full or reaches 40-50 psi, the pump would shut off, and then when you start using water and tank pressure drops, then the pump turns back ON to replenish the tank.
• This kit DOES NOT come with the optional (ESO) Electric-Shut-Off solenoid valve, so it would reply on your existing mechanical auto-shut-off valve in your RO system to turn off the water supply when the tank is full. For most systems this kit will work fine.
• This kit is NOT for misting, ice maker line, line boosting, water transfer. This pump kit is designed for increasing water supply pressure to a RO water system

User questions & answers

Question:	Can i use this so i can use water from a 5 gallon bucket? that way i can have r.o. water from my river if we loose city services during a hurricane
Answer:	Aquatec 8800 Booster Pump would be better than the 6800. And yes, the concept will work if you set it up correctly.
Question:	Can this pump work with a permeate pump
Answer:	Booster pump and Permeate pump are different types of pump and do not affect one another. They can coexist in the same RO system.
Question:	my waste water line runs very long and I think the pressure of the source is low. Is there any maximum water pressure for this pump to work
Answer:	This pump increases the source water pressure. You should have a gauge on it
Question:	Is this pressure switch set point adjustable? I want my system to turn off at 60psi, not 40psi
Answer:	Yes, there is an adjustment on the pump. But it isn’t really marked, so you need to fiddle with it to get exactly what you want. We think it goes up to 90.