11 best rated commodes

Product description

Romeo and Giulietta / Romeo and Juliet

User questions & answers

Question:	Will these work with automatic 5th wheel leveling system
Answer:	My trailer has 15" rims, but I don't see why it wouldn't work. You place a leveler under each tire on the low side of the vehicle, then drive so the tires are on the levelers. The further you move, the higher the vehicle will be. You have infinite adjustment from 0-4". Since you are raising the low side of the vehicle by raising the tire/wheel assembly, it shouldn't make any difference what size the tires are. I would make sure that you center the leveler under the tire (width wise, the center of the leveler would be aligned with the center of the tire tread).
Question:	Would these be able to hold the diameter of a 6k# axle
Answer:	It’s a little short on a 2004 four 5000, but can cut and modify.
Question:	What is the weight capacity
Answer:	Good Morning Shawn S., Thank you for contacting us with your inquiry. Our fender skirts are priced and sold individually, to purchase a pair please add quantity 2 to your cart. For discounted pricing on the pair please contact us at 888 362 4266. If you have any questions please let us know. Thank you,
Question:	Will four of them support a 20,000 lb 2 axle camper
Answer:	That I can’t say. What I did in my case was look at all the Skirts,and picked the one closest to the configuration of the Wheel Well
Question:	Would this work on a 7000 lb camper
Answer:	Good Morning Shawn S., Thank you for contacting us with your inquiry. Our fender skirts are priced and sold individually, to purchase a pair please add quantity 2 to your cart. For discounted pricing on the pair please contact us at 888 362 4266. If you have any questions please let us know. Thank you,
Question:	Can you put one on each axle of a tandem axle trailer and lift both axles at the same time
Answer:	You can just turn it with your hand. Give it a shake and you can tighten it a little more.
Question:	Can you put one on both axles of a tandem axle trailer and lift both axles at the same time
Answer:	Yes, generally. Braking will depend on the incline angle and the surface material. This device stops the tire from rolling but it could be too small to stop the trailer from sliding. For example, depending on trailer weight and tire size ... Asphalt will be good, loose pebble or rock not so good.
Question:	What are the grooves on this where it touches the axle
Answer:	It should work fine if you can get it between the two wheels. It is not long enough to to go behind the front and rear wheel, so you will have to pick the front wheel or the rear wheel, but there has to be enough clearance to get it between the two. Some travel trailers have a lot of clearance between both wheels, mine does not. I hope this makes sense!

Product description

The deluxe heavy duty bariatric folding bedside commode seat by Drive Medical is designed to meet your needs. The frame can be configured to be used as a bedside commode, toilet safety frame, elevated toilet seat or over your existing toilet. The tool free removable back makes configuring the commode easy for any application. The armrests provide a comfortable place to rest on when sitting and indicate a safe place to grab making sitting and standing easier. The push button height adjustable legs makes sizing a breeze allowing this commode to be used as an elevated toilet seat. In addition to comfort this commode can be folded with out tools making storage and travel convenient. The grey power coated steel welded construction ensures strength and durability able to hold up to 650 lbs. The product comes complete with a 16.5" deep snap on seat and lid, 12-quart commode bucket with cover and convenient carry handle, plus splash guard.

• Tool-free assembly in 3 easy steps. The push button height adjustable legs makes sizing a breeze allowing this commode to be used as an elevated toilet seat
• Easily opens and folds for storage and transportation
• Durable plastic 16 1/2" deep snap-on seat with lid
• Comes complete with 12 qt commode bucket with carry handle, cover and splash shield
• Overall Dimensions: 18"(L) x 31.75"(W) x 15.5"(H); Seat Dimensions: 16.5"(D) x 13.5"(W) x 15.5-22"(H); Width Between Arms: 24"; Weight Capacity: 650 lbs

User questions & answers

Question:	What's the advantage over the same manufacturer's considerably lower-priced bariatric, model
Answer:
Question:	What are the dimensions of the seat, specifically the opening/inside hole? Is there enough room for a male to urinate when seated
Answer:
Question:	my father has difficulty getting uo from regular toilet. How high is this seat and if it needs to be adjusted higher does it lower the weight capacity
Answer:	Not sure
Question:	Is this chair okay to use as a shower chair
Answer:	You pour the milk in the glass cup provided, it will froth once you press the button

Product features

Width Between Arms: 24 inches

Durable plastic 16 1/2 inches deep snap-on seat with lid

Seat to Floor Height: 15.5-22 inches

Push-button height adjustable legs allow this commode to be used as an elevated toilet seat

Outside Legs Width: 31.75 inches

Easily opens and folds for storage and transportation; Tool-free assembly in 3 easy steps

Weight Capacity: 650 lbs

Comes complete with 12 qt commode bucket with carry handle, cover and splash shield

• 72 SANITARY DISPOSABLE LINERS: Making cleanup quick and easy, each disposable commode liner is leakproof and includes an absorbent pad that holds up to 16 ounces of liquid. Suitable for any type of commode pail, the leakproof liners eliminate unpleasant odors and messy commode pails. Each box contains 48 unscented commode liners and 48 absorbent pads.
• SUPER ABSORBENT PADS: Each commode liner includes a super-absorbent pad to reduce splashes and spills. Holding up to 16 ounces of liquids, the super absorbent pads solidify the liquid and trap unpleasant odors.
• USE WITH ANY COMMODE PAIL: Universally sized to fit any standard or bariatric commode pail, each liner has a drawstring for easy, sanitary and spill-proof disposal.
• NEUTRALIZES ODORS: Unscented, the commode liners effectively neutralize unpleasant odors.
• VIVE GUARANTEE: 60 day unconditional guarantee so you can purchase now with confidence.

User questions & answers

Question:	What is the thickness of these bags
Answer:	It says it is rated for 2 tons, 4,000 lbs I have a 5th wheel that has a twin axle and 4 wheels. While you never know how much weight will be on one wheel, I suspect it would do fine for the short time you need to get a wheel in the air and change the tire. I have never yet had to use it, and hope I don't.
Question:	What is the measure of the disposable bag, Flat Measures
Answer:	Yes it would work as long as the trailer is not heavier than the jack is rated for.
Question:	Absorbent pad flushable
Answer:	No. You would have no contact point on which to block your trailer from moving once upon the jack.
Question:	Does the absorbent pad help to reduce urine odors
Answer:	No the axle goes in the sattle at the top the grooves are for gripping the surface.

Product features

Commode Liners

Providing a sanitary solution for commode pail maintenance, the Vive commode liners are easy to use and dispose of. The commode liners are universally sized to fit both standard and bariatric commode pails. Reducing splashes and spills, each leak-proof commode liner includes a super absorbent pad that traps unpleasant odors and holds up to 16 ounces. An integrated drawstring also allows for quick, spill-proof disposal.

Use With Any Commode Pail:

Universally sized to fit any standard or bariatric commode pail, each liner has a drawstring for easy, sanitary and spill-proof disposal.

Super Absorbent Pads:

Each commode liner includes a super-absorbent pad to reduce splashes and spills. Holding up to 16 ounces of liquids, the super absorbent pads solidify the liquid and trap unpleasant odors.

Neutralizes Odors:

Unscented, the commode liners effectively neutralize unpleasant odors.

• Modern, Compact One-Piece Design. Perfectly suitable for your small bathroom. Seat length 16.5''; Seat height 16.5” from floor
• Siphon-Flushing: Fully Glazed Flush. Super-Quiet and powerful flush with no clogs. Leak-proof. Highly efficient Dual-Flush 6lpf/4.1lpf (1.6gpf/1.1gpf), average flush 1.28gpf
• Easily Installed. Self-Cleaning glazed surface is both attractive and easily maintained. Soft closing seat(PP material) and Wax Ring are included. Durable UF seat is available for separately purchase
• Note that this toilet is designed for floor mounting, 12” Rough-In (from wall to C/L Outlet).
• If your supply line size is 1/2", you could directly connect your water line to the toilet. If your supply line size is 7/8", please screw off the adapter, then connect it. (Supply line must be purchased separately )
• CEC compliant, 5 Year Limited Warranty against staining or fading of porcelain glaze. 3 Year Limited Warranty on flushing mechanism and Soft-Closing toilet seat lid

User questions & answers

Question:	What is the distance between the back of the tank and the wall behind it
Answer:	Hello, The top of the seat measures 16.5". Thank you, The Swiss Madison Team
Question:	I tried to order but amazon say you won’t ship to my location
Answer:	This toilet is installed the same way most standard toilets are. Though the bolts are concealed once the installation is completed, using side caps.
Question:	Are there any Bidet seats that are usable on this model
Answer:	Standard 12.5-13" from studs. Same as any rough in toilet
Question:	Can the seat be replaced with a standard round? Can the flush valve of a standard type that can be replaced
Answer:	Hi, The trapway diameter is 2.75". Thank you.

Product features

HOROW ONE PIEICE SIPHONIC TOILET

Although designed for small spaces, this toilet looks perfect in every modern bathroom. The seat-lid closes silently. The Dual-Flush feature is ideal for water conservation.

Caution: The toilet might seem out of place in a large bathroom.

Toilet is easily installed and easy to keep clean

PP Toilet Seat and Wax Ring are included to facilitate installation and use. Trapway is concealed from view. Glazed surface is Self-Cleaning, simplifying maintenance.

Easy-to-Clean Design

Concealed trapway design and Self-clean glaze surface creates a nice look and makes cleaning easier.

Super Quiet & Powerful Flushing

Fully glazed flush, bringing super quiet & powerful flushing - NO clogs, NO leaks.

Soft Closing Seat

The seat lid closes quietly and easy to get the toilet seat off to tighten or clean after years of use

Durable UF seat is available

Durable UF seat is available for separately purchase for future replacement.

(Asin: B07PB1JR2J)

Tools Required and Installation Instruction Provided

A Water supply kit (not needed if replacing existing toilet)

B Adjustable wrench

C Flathead screwdriver

D Level

E Nut Driver or socket set

F Putty knife

G Tape Measure

Compliance Certifications

Meets or Exceeds the Following Specifications: -ASME A 112. 19.2M for Vitreous China Fixtures includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

-cUPC certification from IAPMO

• WIDE & COMFORTABLE RAISER - Unique ergonomic design adds 4" of height extension to your toilet seat to make it easier to sit down or get up from the toilet. Our premium elderly assistant toilet seat riser is intended for individuals that might be handicapped or disabled, experience limited mobility in daily activities, may be pregnant or seniors with bending or sitting difficulties
• SECURE & SAFE LIFT - Anti-slip surface, push pins and locking mechanism ensure a secure fit on the toilet bowl rim. Removable padded grab bar handrail handles ensure a comfortable grip and seamless edges provide a better sitting experience to maximize safety and security
• DURABLE & HYGIENIC - Toilet seat riser is ADA compliant and made with heavy-duty molded premium plastic that is germ-resistant and can withstand frequent long lasting use
• LIGHTWEIGHT & PORTABLE - Weighs less than 5 lbs. Easy to store or to travel with for added convenience. Contoured seat is designed with a wider size surface for added comfort, stability and peace of mind while taking care of personal necessities in the bathroom
• EASY INSTALLATION AND CLEANING. Tool-free installation. Lift up the toilet seat and install. The adjustable toilet seat riser fits on most standard toilets (16.5") and elongated toilets (18.5"). Easy to clean and wipe
• Do NOT install the product on the toilet lip. It should be installed on top of the toilet seat.

User questions & answers

Question:	Why does the product images show something entirely different than the customer uploaded images? Which one do we get if we buy this
Answer:	Less - width is 13 3/4" from side to side as it sits on top of toilet bowl. Including arms width is 21 1/4" wide. Hope this helps.
Question:	My elongated toilet has a 16" hole; can someone assure me that this will fit without rocking
Answer:	If my memory is correct it has no latch on the lip. What it has is long bolts that go through the back and your seat sits on top. I sent mine back. Not because of that because it was too high for my mother
Question:	will this work on a rv toilet
Answer:	Have you searched Amazon? That's where I purchased mine. I haven't looked for the standard type because the toilets in 3 my bathrooms are all elongated.
Question:	Thank you, look nice, but i do not know which color much better with my moveable table? https://www.amazon.com/dp/b01m0lehab
Answer:	While the paper work and the website say that you can use your existing seat and cover assembly, that is only "kind of" true. The long bolts for the seat riser are designed to pass through the seat hinge, and if you have a new "click to connect" or "flip to lock" seat hinge, it will not work. You must use a old style seat hinge set up that has bolt holes in it. I end up using a seat assembly with a plastic hinge to make it easier to drill out the bolt hole to accommodate the large lag bolts that are supplied with the Vive seat riser assembly. If you have an older seat set up, it will probably work just fine, but if you have a modern seat with the quick disconnect feature, it will not work. All that said, even with having to get a new cheap $19.95 toilet seat to go with this , it only took about 15 minutes to install, and once installed, it is quite sturdy.

Product description

With it's skirted trapway, the st tropezone-piece toilet offers a sleek eye appealing seamless design that is easier to clean. The elongated and comfort height bowl adds more comfort. Dual flush allows you to choose between partial and full (.8/1.28) flush, which allows you to be fiscally and environmentally conscious without sacrificing performance. Quick-release matte chrome hinges allows the seat to be unlatched from the toilet for easy removal and convenient cleaning, no tools required.

• Modern design, clean, sleek look and compliment with different styles
• Fully skirted trapway - extremely easy to clean
• Sleek and eye appealing modern design
• Soft closing seat included
• Special holes to reach the bolts - includes bolt caps and wax ring

User questions & answers

Question:	Can this toilet be adapted with an offset flange to 10 inch rough-in
Answer:	If you mean an overflow pipe than no it does not however the valve does come with a 8 inch rubber tube that connects to the overflow pipe. Give Fluidmaster a call or visit our website at Fluidmaster.com or toll free 800 631-2011 for help on selecting the correct products for your toilet.
Question:	Is this a special seat or can I replace it with any elongated seat
Answer:	This was written in my gerber tank: Call 1-888-648-6466 for flapper # 99-827 Engraved numbers in the tank: 141223 299 I was able to use the product. It is almost too tall but I was able to adjust the floater to the right height to work for me...I was about 2-3 clicks from the last click. My tank has a water level and my water is set at that level. I also set the actual flapper to #4 setting if that helps
Question:	What is the rough in
Answer:	Take off lid and make sure depressing the handle lifts the flapper or else adjust
Question:	Will I be able to tuck my manhood inside the bowl whilst taking a dump
Answer:	Measure with tape measure. Also 3" fits a softball and 2" a baseball. Google it for more details

Product description

ELG CFWC EC MWD SEAT

From the Manufacturer

This Bemis Elongated Closed Front Toilet Seat features a stylish molded wood design for an attractive look in your bathroom. This lift-off toilet seat conveniently removes for cleaning and replacement. Simply twist the hinges and remove. Bemis Manufacturing Company prides itself on continuing to bring innovation, value and environmentally friendly products to you.

• QUICKLY AND EASILY REMOVES: For cleaning or replacement
• HINGES: Plastic twist to unlock and lock
• HARDWARE: Non-corrosive bolts and wing nuts
• RESISTS CHIPPING AND SCRATCHING: Durable enameled wood seat provides a superior high-gloss finish
• USE: Recommended for residential use
• FITS ALL ELONGATED TOILETS: Including Kohler, American Standard, TOTO and many more
• PROUDLY MADE IN THE USA: With Earth friendly materials and processes

User questions & answers

Question:	Is the seat flat or does it slope inwards
Answer:	Same thing happened to mine!! The lights also don't work and the water BARELY trickles out now....
Question:	How thick is this seat
Answer:	On the back of the unit, there is a small cover the size of a quarter held by 2 screws. You may need a small pocket knife or flat head screw driver to remove the cover. It has a rubber ring to seal it to keep out water. Once uncovered, you will see a small red switch box that has 2 switches. Move the #2 switch (or right side) to the on (or up) position and this will change from C to F.Good Luck!
Question:	Is the *bottom* of the seat flat? I have to add custom bumpers so it needs to be flat
Answer:	You have to select the rainfall shower or the body jet or the hand shower. So, no, teh rainfall shower and the body jets cannot be used at the same time. And yes, the rainfall shower head is tiltable.
Question:	What is the length of the seat? The specs say 21x15.1x 2.4 inches, but most elongated seats are 18-18.5 inches, like Bemis 19601CP images show
Answer:	The SP787392B has a black glass panel and the SPA392M has an aluminun alloy "silver" metal finish on the back panel. All of the shower features are the same on both. It's just the color of the back panels.

Product features

Toilet Seat Size Guide

To ensure a proper fit, measure from the front of the toilet to the center of the mounting holes.

Round - 16.5" or 42 cm.

Elongated - 18.5" or 47cm.

Care for Your Seat

To keep your seat looking great for years to come, use a mild soap and water to clean.

Seat Not Staying Up?

Check the position of toilet tank and lid: 1. Confirm that the toilet tank and bowl are level. Adjust tank bolts as necessary. 2. Confirm that cover is properly placed on the tank and/or cover is set toward the back of the tank.

Bemis Brand

Bemis toilet seats bring quality, innovation and style to residential and commercial properties worldwide.

Product description

Drop-Arm Commode.

• Arms swing out of the way for easier lateral transfers on and off the commode
• Transfers are easier for patients using a wheelchair. Not latex free
• Place near the bed with near arm down for patients transferring during the night
• Padded Commode, G98204: 350-lb. (159 kg) Weight capacity; Seat height range, 20"-25" (51 cm-64 cm); Seat depth, 18"-20" (46 cm-51 cm); Width between arms, 18.5" (47 cm); Overall width, 22" (56 cm)
• Non-Padded Commode, G98202: 300-lb. (136 kg) Weight capacity; Seat height range, 18.25"-23.25" (46 cm-59 cm); Seat depth, 18"-20" (46 cm-51 cm); Width between arms, 18.5" (47 cm); Overall width, 22" (56 cm)

User questions & answers

Question:	How easy it to wipe while sitting
Answer:	Description is wrong. The seat is well padded and the arm rests are too.
Question:	Can this product work with a regular toilet by removing the bucket
Answer:	Thank you for your interest in MET-Rx! The EXTREME NOS PUMPED Nitro Grape (B57927) contains 200 mg of caffeine per bottle.
Question:	What are the dimensions of the seat itself and the seat opening? Thank you
Answer:	I am not sure of the price but the grape is by far the best flavor they offer!!! That's my opinion though
Question:	Why does description say non-padded when the photo image shows padded? So is it indeed padded or not? I need it well padded. Thanks
Answer:	Aprox 50 pounds

Product features

Make Lateral Transfers Easy

The Guardian Padded Drop-Arm Commode is designed to make lateral transfers easier for caregivers assisting and individuals using a wheelchair. The arms swing down with just a push of a button and thick, resilient foam padded seat and back provide increased comfort. Foam handgrips won't slip, even if wet.

Deluxe features and heavy-duty construction make this the perfect choice for long term use. Place near the bed with near arm down for patients transferring during the night.

The backrest can be removed for use as an over-the-toilet safety frame.

Pail, lid and splashguard included.

Padded Drop-Arm Commode Features

Arms swing out of the way for easier lateral transfers on and off the commode.

Padded Drop-Arm Commode Features

Arms swing out of the way for easier lateral transfers on and off the commode.

Padded Drop-Arm Commode Features

Backrest can be removed for use as an over-the-toilet safety frame.

Padded Drop-Arm Commode Features

Arms swing out of the way for easier lateral transfers on and off the commode.

• Extra tall toilet bowl: 20 inches. Height top of seat: 21". Solid metal handle and new generation dual flush system
• Adds bathroom safety. Helps sit down and stand up more easily. Helps prevent falls.
• High performance. Designed and engineered by Convenient Height Co., Massachusetts
• Approved by Board of Registration of Plumbers, CEC. May qualify for Tax Deduction as medical expense
• Dual flush valve 1.28 gal/full, 0.9 gal/light. Advanced packaging. Guaranteed safe delivery.

User questions & answers

Question:	Is the toilet California compliant
Answer:	no 120 vac only
Question:	Is the tank lined
Answer:	I don’t know, mine is 110volt
Question:	I need almond or bone color, is that available
Answer:	No it will not work on 220v.
Question:	Are there any other 20 inch high toilets on the market for less money
Answer:	any standard water softener salt would work

Product features

DUAL FLUSH SYSTEM

• 3.5 inch total length flush lever handle
• Solid metal material
• When system in still position handle stays perfectly horizontal

DOWN: FULL FLUSH 1.28GPF

• Handle down for full flush
• Full: 1.28 gallons per flush
• Dual flush system

UP: ECONOMY FLUSH

• Handle Up for economy flush
• Eco: 0.8 gallons per flush
• Dual flush system

UNOBSTRUCTED

• Handle unobstructed by the toilet seat
• Handle is easy to access with seat up

Baseboard heater fit

Bowl back-end and structural reinforcement frame are designed in a way so baseboard heaters fit behind Convenient Height brand toilet. Engineered to fit well.

Highly durable flush actuator

Dual flush actuator is made to last. It connects to metal handle via highly durable connection and stays rigid. Well engineered components.

High elevation gravity flush

Not all trap ways are created equal. Our 20 inch tall bowl trap-way uses its own height for a powerful gravity-based flush. Engineered to flush well.

Slow closing toilet seat

Convenient Height Co. now supplies a new version heavy duty toilet seat. Slow-closing and well fitted. Engineered for max sitting comfort.

Stunning from every angle

The Convenient Height Co. engineers and designers from Massachusetts worked together to ensure our 20 inch Tall Toilet is elegant and truly beautiful. It looks perfectly proportioned and fits seamlessly in any style bathroom. This was achieved by making the tank leaner and keeping the line flow graceful, allowing our Convenient Height super tall bowl blend in.

Product description

A LUXURIOUS LOOK AT AN EXCELLENT PRICE- With its sleek design, chrome-plated knobs, and high-quality parts, our bidet attachment will give your bathroom a next-level look. Constructed with high-pressure faucet quality valves with metal/ceramic cores and braided steel hoses instead of traditional plastic.

From the Manufacturer

Features: High Quality Metal-Ceramic Core Valves. Steel Braided Hose. Innovative Hygienic Nozzle Guard Gate. Self-Cleaning Nozzle Function - Available with Neo 120, Neo 180, and Neo 320. Standard white body and chrome-plated controls. Sleek, curved shape fits most two-piece toilets. Do It Yourself Installation. Adjustable fitting plates for secure attachment. All standard plumbing size accessories included. Toilet Dimensions: Center of toilet to the edge: maximum 7.75 inches. Distance between the two screws: between 3.5 to 8.25 inches. Distance from screw to toilet tank: minimum 1 inch. Distance from the screw to the edge of the toilet bowl: between 1.25 to 3.5 inches. Distance from the center of the toilet to the wall: minimum 11.5 inches.

• A LUXURIOUS LOOK AT AN EXCELLENT PRICE – With a sleek design and high-quality parts, our bidet attachment will give your bathroom a next-level look. Constructed with high-pressure valves with metal/ceramic cores and steel hoses instead of plastic.
• HYGIENIC NOZZLE GUARD GATE – Shields the nozzle for your ultimate sanitary experience. The nozzle automatically retracts behind the guard gate after each wash to ensure it is protected until your next use.
• HAVE FUN DOING IT YOURSELF - Includes ALL PARTS AND TOOLS to get your bidet up and running in minutes. Easily attaches to and detaches from any standard two-piece toilet.
• ENVIRONMENTALLY-FRIENDLY, WORTHWHILE INVESTMENT – Save money (and trees!) on toilet paper. Cleaning with our bidet is gentle on your skin and sustainable for the planet.
• NO KIDDING 18-MONTH WARRANTY – We are always here to make sure you are 100% satisfied, so anytime you have problems or concerns about the products, we are just one call away. Register your bidet online and get an extended warranty.​

User questions & answers

Question:	what is the difference between neo 180 and
Answer:	Yes. Review the size dimensions before you proceed with procuring it.
Question:	Does the self cleaning nozzle function completely clean the nozzle or does the nozzle still require some manual cleaning
Answer:	No. This sink is for Undermount Installation only. For topmount installation, you can you get this sink: https://www.amazon.com/dp/B07RB2D3GT
Question:	What works better. Wet wipes or this bidet? Do you have to use more toilet paper than normal because your rear end gets all wet
Answer:	Yes
Question:	Is the toilet seat level (back and front) with this bidet installed
Answer:	Any faucet should work due to its and under mount style sink. I personally used a larger single hole kitchen faucet style so to have plenty of room for access.

Product features

Luxe Bidet Neo 120 (Blue)

The Luxe Bidet Neo 120 is a cold water mechanical bidet, equipped with a single wash nozzle and dual control knobs that are simple to operate. During use, the nozzle drops below the guard gate and retracts when not in use. The Neo 120 features an innovative self-cleaning sanitary nozzle that rinses the nozzle with fresh water. The bidet comes with standard US fittings and everything needed for installation.

Self-Cleaning Nozzle

In addition to the hygienic benefits of the retractable nozzle and guard gate, this model also features a nozzle cleaning mode to thoroughly rinse the nozzle. To activate nozzle cleaning, simply turn the mode dial to the right, then turn the water pressure dial to the highest pressure setting. The bidet features dual chrome-plated knobs that allow the user to select a mode and then activate and adjust water pressure. With clearly defined settings on the control panel, the bidet can easily be operated by children and the elderly.

Nozzle Guard Gate & Retracting Nozzle

The hygienic nozzle guard gate shields the nozzles and ensures the bidet is always ready for clean operation. The guard gate opens manually for access to the nozzles. The retractable nozzles only drop below the gate when the bidet is turned on. When no water is running to the bidet, the nozzles will remain retracted and under double protection behind the nozzle guard gate.

Designed to Fit Any Toilet

Our Neo Bidets are designed to fit comfortably under standard toilets with zero gap between the seat and the bowl. Thinner designs in the market offer no advantage in the fitting of the bidet under the seat, as any interference with the seat is not the result of the thickness of the bidet but the result of the nozzle housing extending into the bowl. In fact, going slimmer than 9mm can take away the strength and durability of the bidet while offering no advantage. Our bidet will fit under any seat that a slimmer design can fit under.

Slim & Durable Design

The Neo 120 comes with a slim and solid design and strong internal hoses which properly channel water and promote the longevity and strength of the bidet. Thinner designs in the market boast a slimmer design, but this can compromise the durability of the bidet due to a lack of space for internal hoses as well as general flimsiness. Our bidet, being only 9mm thick, is slim enough to allow for inner hoses and structure, while not being too slim to compromise the durability or function of the bidet. Experience the best clean without any of the headache.

High Quality Parts at an Excellent Price

Our bidets are manufactured with high quality, durable parts built to last and withstand the water pressure that will flow through it. Neo Series Bidets are constructed with high-pressure faucet quality valves made with metal-ceramic core and braided steel hoses instead of traditional plastic. Additionally, the Neo Series now comes with a metal cold water t-adapter.

Patented Design

The Neo Series bidets have passed ASME sections ASME A11218.1-2012/CSA and ASME A112.4.2-2009 in a test conducted by the IAPMO Lab. They have a patented design (Patent D714428) that is unique and upgrades your bathroom instantly. These bidets also come with a built-in check valve, which works like a vacuum breaker and does not allow backflow.

Good for Women, Elderly, Limited Mobility

Bidets are a beneficial and relieving solution for women during that time of the month, pregnancy, and even UTI's. Bidets can improve bathroom autonomy and independence for the elderly as well as promote self care for those with limited mobility or other medical needs.

Established Brand of Mechanical Bidets in America

At Luxe Bidet, our mission is to provide affordable and accessible products for every household. We fully and proudly stand behind our product.

Product description

The TOTO Entrada Two-Piece Round 1.28 GPF Universal Height Toilet offers a clean and modern high profile design. The Entrada bowl and tank set includes a tank to bowl gasket, tank to bowl hardware, and toilet bolt caps. The Entrada utilizes TOTO's E-max flushing system, featuring a 3” wide flush valve, extra-large siphon jet, and a large trapway. This reliable, highly efficient combination generates a powerful cleansing flush while only using 1.28 gallons of water. The Entrada is designed in TOTO’s Universal Height which allows for a more comfortable seat position across a wide range of users. This Entrada comes with a left-hand chrome trip lever. The Entrada is ADA compliant and meets the standards for EPA WaterSense, and California’s CEC and CALGreen requirements. Additional items needed for installation and use must be purchased separately: wax ring, toilet mounting bolts, water supply lines, and toilet seat.

From the Manufacturer

Attention to detail, continuous improvement, over a thousand research and development professionals and 90+ years of experience fuel TOTO's product quality. TOTO provides unmatched performance, durability and reliability, representing the ultimate in customer satisfaction for our toilets, faucets, lavatories, showers and products for the entire bathroom. Superior quality backed by over 90 years of experience creates many benefits: Product quality and consistency thanks to our precision production operations, TOTO installations offer peace of mind and performance you can count on, Reliability translates into reduced maintenance costs and superior performance. Quality is one of TOTO's guiding principles in all of our operations both here in the U.S. and across the world.

• Clean, modern two-piece round bowl and tank set | Toilet seat is not included
• Product dimensions – 26-5/8” D x 14-3/8” W x 30” H | Flush valve – 3-Inch Flapper Style | Rim size – 22-7/8” D x 12” W x 16-1/8” H | Rough-In – 12” | Tank size – 7.5” D x 15-1/4” W
• ADA, WaterSense, CALGreen, and CEC compliant
• E-Max 1.28 GPF flushing system, creates a powerful flush
• Universal Height for more comfort across a broader range of individuals

User questions & answers

Question:	inch flush valve
Answer:	This product does not supply the two female quick connects that you will need to place into your water supply line.
Question:	Does the one-year warranty bother anyone? I know american standard has 5 or 10 year warranty. Love this size, but why so short warranty
Answer:	yes, there is a plastic bracket that pushes and locks over the end, you have to have that bracket attached to the end of the tubing
Question:	Does it come with the screws or bolts required to install it? Are there any other things I need to order besides the toilet and toilet seat
Answer:	yes, according to what i can find this will replace the HDXir220 perfectly. They both have the 1/4 inch ends for 1/4 inch quick connectors. i wont swear to it but i believe I actually had that exact one previously in the same line for my fridge as this aquacrest is now.
Question:	These dimensions must be wrong. The elongated bowl model is 30" deep. The round bowl should be less
Answer:	The two filters I recieved on 9/28/2020, did NOT have any additional items. No snap connectors!! I was also looking for snap connector ends. I try and rely on reviews and answers to questions. This one didn't work out.