13 best flapper for kohler toilets
A flapper for Kohler toilets is a critical component related to toilet parts and bathroom fixtures. Kohler is a well-known brand in the kitchen and bath fixtures industry, including toilets. The flapper is a valve in the toilet tank that controls the water flow from the tank to the bowl during a flush and ensures a watertight seal after flushing.
Functionality: The flapper is lifted during a flush, allowing water to rapidly flow from the tank into the toilet bowl, initiating the flush cycle. After flushing, the flapper falls back into place, creating a seal to prevent water from continuously flowing into the bowl.
Design and Compatibility: Kohler manufactures flappers that are designed to fit specifically in their toilets. These flappers are engineered to match the dimensions and specifications of Kohler toilet models, ensuring proper functioning and a tight seal.
Material and Durability: Flappers for Kohler toilets are typically made of rubber or similar durable materials that can withstand the constant exposure to water and chemicals found in the toilet tank. This ensures a longer lifespan and reliable performance.
Replacement and Maintenance: Over time, flappers may wear out or become damaged, resulting in water leakage or inefficient flushing. It's important to regularly inspect and, if necessary, replace the flapper to maintain optimal toilet performance and water efficiency.
Water Efficiency: Kohler, like many manufacturers, designs its flappers with water efficiency in mind. The flapper's design allows for an efficient flush that uses an appropriate amount of water to clear the bowl effectively.
Understanding the importance of a functional and appropriate flapper for Kohler toilets is crucial to ensure proper flushing, water efficiency, and overall functionality of the toilet system. When replacing a flapper, it's essential to choose the correct type and model that matches the specific Kohler toilet being used.
Below you can find our editor's choice of the best flapper for kohler toilets on the market
Kohler (BLUE PART GP85160 FLAPPER WITH FLOAT), 2
Kohler
Product description
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2 in. flapper with a float used in various 1.6 GPF two piece toilets
- Also used in KALLISTA toilets
- Compatible with the following KOHLER Models: Wellworth 3114, 3407, 3420, 3421, 3422, 3423, 3428, 3432, 3433, 3438, 3458, 3481, 3558, 11450, 11470, Revival 3455, 3555, Iron Works 3456, 3463, Kathryn 3484, Portrait 3591, 3490, Epernay 14178 EP, 14247 EP, Alouette 14247, 3491, English Trellis 142
- Devonshire 3457, Revival 3555, Memoirs 3452, 3462, Crimson Topaz 14231, Close Reach 14231 SB, Memoirs 3426, 3439, Folio 3445, 3448, 3449, 3454, 3419, Wellington 3446, Loon Lite 14210, Fleur 3447, Folio 3445, 3448, 3449, 3454, 3419, Confidante 355
- Kohler Genuine Part
- Fit's various two piece toilets
- Blue with float
User questions & answers
| Question: | I have this flapper already in my toilet. There is a ghost or phantom mini flush every 10 minutes. Should I replace this flapper |
| Answer: | The THU134 is the whole assembly for the full side. Includes all the parts. |
| Question: | I got one just like this locally and the chain has broken twice. Anyone have problem with the chain breaking on this one |
| Answer: | Yes. YouTube it |
| Question: | If I may please ask, people speak of a number etched into the lid. I see letters and numbers but where do I match them up with the product? This looks just like what is in the tank with the marshmallow floaty thing and everything. Thank you in advance for your assistance |
| Answer: | If you simply pinched the sides of the old float and pulled it straight up, then you probably didn't snap anything, and it should work perfectly when you put it back on the new cap. Sometimes, people don't Center the thing properly and therefore it doesn't move freely. If that happens, just remove it and replace it so that it moves freely. But here's a clue: Korky doesn't sell the float separately, because you never ever need to replace it unless you somehow mash it into place and break it. |
| Question: | Does this work with a K4620 toilet |
| Answer: | This is a replacement for the working parts in a Korky 528 or 530 series QuietFILL toilet fill valve. We have replaced the fill valves in both of our toilets with the Korky units and would never consider anything else. If you have a Korky fill valve it only takes a couple minutes to replace this diaphragm and cap. Much quicker and easier than replacing an entire fill valve. If you don't have a Korky QuietFILL tank valve in your toilet tank this item won't do you any good. |
Product features
Kohler K-GP85160 (BLUE PART GP85160 FLAPPER WITH FLOAT)
Protect the Kohler products, always look for the Kohler GENUINE Parts logo. Kohler GENUINE Parts are designed by Kohler engineers to maintain original product performance and promote product longevity.
Kohler GP84995KOHLER GENUINE PART GP84995 FLAPPER (HINGE),Multicolor,2"
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2" hinge flapper used in various one-piece toilets
- Corrosion resistant
- Rigid bar for consistent flush
- Compatible with the following KOHLER Models: Rosario 3434, Rialto 3386, San Raphael 3466, 3467, 3384, Revival 3360
User questions & answers
| Question: | Would it fit kohler san raphael k-3397 series? thanks |
| Answer: | I found my answer underneath the toilet's water tank lid - a list with the replacement parts and their corresponding numbers |
| Question: | Does this fit the Kohler San Raphael one piece toilet? Thanks |
| Answer: | Very unlikely if your toilet is that old. The newer design has a much larger opening (like 4” instead of 3”). However, going on Kohler website you might find a part number for your older toilet. Alternatively, take the old one out and measure its diameter. Hardware stores often have generic brand flappers that would fit and work fine. |
| Question: | Can I use the existing pivot bar instead of goiing through the replacememnt thing |
| Answer: | Not sure about your model. Flappers come in 2 sizes. 2inch and 3 inch. This flapper is the larger size. Works on my Kohler |
| Question: | the rear bar doesn't stretch (to fit into the housing) like the old one - I guess that the rigid rear bar is sized to snap into the housing |
| Answer: | Yes. The GP 1078441 is a replacement for part No. 1016546. |
Product features
Kohler GP84995KOHLER GENUINE PART GP84995 FLAPPER (HINGE),Multicolor,2"
Kohler GENUINE Parts are designed by Kohler engineers to maintain original product performance and promote product longevity.
Features
- Kohler GENUINE Part
- 2" hinge flapper used in various one-piece toilets
- Rigid bar for consistent flush
- Compatible with the following Kohler Models: Rosario 3434, Rialto 3386, San Raphael 3466, 3467, 3384, Revival 3360
- Used with rear outlet flush valve
Kohler K-GP1078441 PART GP1078441 FLAPPER FOR TWO-PIECE TOILETS WITH CLASS FIVE TECHNOLOGY, 3-1/4 In, Red
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 3 1/4" flapper
- Used in various two-piece toilets with Class Five technology
- 3 1/4 in. made with corrosion resistant material
- Compatible with the following KOHLER models: Memoirs 4485, 4491, 3509, 3515, 3532, 3542, 11461, 4473, 4492, 3511, 3526, 3533, 3548, 11460, 11968, Bancroft 4633, 3487, Devonshire 4708, 3503, Cimarron 4634, 3496, 3497, 3499, 11465, 11466
User questions & answers
| Question: | Which flapper should i use in kohlor model k-4536 one piece |
| Answer: | I purchased this as a replacement for an MWF filter, however according to the instruction pamphlet that came with the filter, it also is a replacement for the GWF filter. |
| Question: | We have 2 pc Koehler toilets that are 34 years old and in need of a replacement flapper. Will this one work? (class 5 tech |
| Answer: | you have to match the numbers of your refrigerator filter OEM to see the right one |
| Question: | Have a 2 pc kohler toilet model k3323bb. which flapper should i use |
| Answer: | Dear Customer, thanks for your inquiry. Per double check, our FilterLogic MWF Refrigerator Water Filter is comptabile with one purify rfc2500a perfectly. |
| Question: | My Kohler toilet has 1016546 flapper. Would this one be compatible |
| Answer: | Dear Customer, I am sorry, but this kind of filter does not remove VOC's. However, there are some other options available to help with your unique water treatment problems. NSF 53, 42&372 certified filters: https://www.amazon.com/dp/B07D7T5DFW Orders welcome! |
Product features
Kohler K-GP1078441 PART GP1078441 FLAPPER FOR TWO-PIECE TOILETS WITH CLASS FIVE TECHNOLOGY, 3-1/4 In
Description:
Protect the Kohler products, always look for the Kohler GENUINE Parts logo. Kohler GENUINE Parts are designed by Kohler engineers to maintain original product performance and promote product longevity.
Features:
- Kohler GENUINE Part
- 3 1/4" flapper
- Used in various two-piece toilets with Class Five technology
- 3 1/4" made with corrosion resistant material
Kohler GP83064 Toilet Flapper, 2 In, Red
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2" flapper used in various older one-piece toilets
- Corrosion resistant
- Compatible with the following KOHLER Models: Pillow Talk 3378, Cabernet 3401, 3408, San Raphael 3395, 3397, Rialto 3402, San Miguel 3406, Rochelle 3385, 3385-C, Rosario 3434, San Martine 3435, Palarre 3383, Prairie Flowers 14290-WF, Fables & Flowers 14290-TL, Laureate 14291
- Kohler Genuine Part
- Used in older one piece toilets
- Stainless Steel Chain
User questions & answers
| Question: | Is this the flapper with the styrofoam filling |
| Answer: | To everyone who answered this question "plastic" you are wrong. I received two of these and they have a brass threaded fitting on the bottom. The reason you are incorrect is that Korky makes a half dozen models of this (all but one are plastic) and you didn't look at the model number 528PRO ($17.95) that I inquired about. This 528PRO DOES HAVE A BRASS FITTING. This is a great reminder to all who reply to questions to make sure that you know exactly which product you are commenting on. |
| Question: | I have a toilet in k3434bb model, does this flapper fit for it? (My current flapper is leaking water |
| Answer: | Standard sized (7/8" I believe); though your existing line should work, why not use this as an opportunity to replace the supply line at the same time? Measure the length, and then choose the next larger size, something like this: https://www.amazon.com/Fluidmaster-B1T12-Connector-Braided-Stainless/dp/B001BQ039K/ |
| Question: | Is there a coordinating valve seal for this flapper |
| Answer: | I use it in a regular size toilet I have no idea what the designation small means but it works great and installs very easy. |
| Question: | Why do all of the pictures of flapper valve show from the top? The size of the bottom piece is what you need to see to order the right flapper |
| Answer: | Yes. these are all genuine Toto parts. |
Kohler K-GP1039444 Toilet Flapper, 3-1/4 In, Red
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- For One-Piece toilets with 3 1/4" flappers
- Corrosion resistant
- Compatible with the following KOHLER models: Cimarron 3489, 3802, 11889, Memoirs 3451, 3453
User questions & answers
| Question: | I have been waiting weeks for this to deliver. When exactly are you going to deliver it |
| Answer: | Good afternoon, the Flapper is always smaller that the drain hole . It will fit a 2.5 hole. |
| Question: | Are this part is Kohler Genuine Part |
| Answer: | NO, the recommended flapper for K-3397 is part number GP83064. |
| Question: | Will this flapper fit a Koehler I piece low flow toilet |
| Answer: | This is tricky. You have to look in the tank. There are two different flappers. If your toilet has the bar on the back, this is it. If it attaches by hooking onto the sides then this is not the one. Just remember, if you get this one you have to remove the bar from the flapper and slide it on to the piece that it attaches to. It does not snap on...slide it on. |
| Question: | Hello does this fit Kohler model K 4421-ca |
| Answer: | It takes 15 seconds to slide a new bar in. Why wouldn't you replace the bar? Just make sure you put it in the same slot. |
Product features
Kohler K-GP1039444 Toilet Flapper, 3-1/4 In, Red
Kohler GENUINE Parts are designed by Kohler engineers to maintain original product performance and promote product longevity.
FEATURES
- Kohler GENUINE Part
- For One-Piece toilets with 3 1/4" flappers
- Corrosion resistant
- Compatible with the following Kohler models: Cimarron 3489, 3802, 11889, Memoirs 3451, 3453
Kohler PART GP1078440 FLAPPER (SHARK-FIN), 2 In, Red
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2" shark-fin flapper for various one-piece toilets
- Corrosion resistant
- Compatible with the following KOHLER models: Memoirs 3451, 3453, Gabrielle 3322, Santa Rosa 3323, Kathryn 3324, San Raphael 3384 Devonshire 3488, Revival 3360, Ankara 14230-TF, Rialto 3386
- Note: The two inches should be measured at center to center of the inside of the flapper (where the arms of the rubber flapper would attach to the flush valve when installing). This measurement on this service part should be 2.1 inches making it a 2-inch flapper
User questions & answers
| Question: | Will this fit the Kohler ball |
| Answer: | It’s bigger than the regular flapper for bigger sets |
| Question: | Will it fit serial number sfs374m6j since i can't find model |
| Answer: | 3” |
| Question: | Will this seal fit the kohler model k |
| Answer: | 3 means 3 yes |
| Question: | is the bottom part round or square on this flapper |
| Answer: | This valve has an adjustable flow rate and a long list of toilet brands/models and their appropriate (easy) settings. This was installed in a dual-flush Toto. O.9 Gal. refill in 30 sec., though there is sufficient residual water in the tank for a second flush. |
Kohler Genuine Part 1083980 3" Toilet Canister Flush Valve Kit, 2.50 x 1.50 x 9.00 inches
Kohler
Product description
Protect the warranty on Kohler products, always look for the Kohler Genuine Parts logo. This flush valve was designed by Kohler engineers to maintain original product performance and promote product longevity. Replace your old or leaky flush valve with an OEM Kohler part. Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean surfaces.
From the Manufacturer
You can count on genuine Kohler parts to maintain the same Kohler quality. Canister valve replacement/repair kit.
- Kohler genuine part
- Canister flush valve kit for Kohler Cimarron toilets
- 3 inches canister with a 3 inches outlet
- Compatible with Kohler Cimarron tank model number K 4634
- Look inside the back wall of the toilet tank to identify tank model number. Material: Plastic
- Complete assembly with tank to bowl gasket. Inlet diameter: 0.5 inches
User questions & answers
| Question: | Will this flush valve fit the 1.6 Gal model |
| Answer: | I have replaced my flapper style flush valves with this canister style and they work perfectly. |
| Question: | where do i find toilet model number |
| Answer: | On back of toilet tank- you will have to remove it to see it |
| Question: | how do I install kohler |
| Answer: | In a nutshell, the lower two components in the image go under the tank and everything else goes inside. If you can't use the installation being replaced as a guide for installing the new one, this site (http://www.plumbingsupply.com/kohlertoiletparts-cimarron.html) also kind of helps visualize how it all fits together with the tank plate. |
| Question: | Has anyone had issues with the white refill tube coming out of the canister |
| Answer: | Yes. Tube had hardened after 8 years of use. When replaced tubing, I found the 1059289 Canister Flush Valve Stop Kit (the plastic piece to which the tubing attaches) had cracked, no longer able to twist lock. I will either replace it (original black plastic piece is discontinued - 'appears' to be replaced by flush-valve-repair-kit-1229656 with larger yellow plastic piece) or drill a hole and insert a pin to hold it in place. The teflon tape idea or some 'reversibly' applied rubber cement, might be needed to hold tubing in the valve stop item. |
Product features
Kohler Genuine Part 1083980 3" Toilet Canister Flush Valve Kit
This flush valve was designed by Kohler engineers to maintain original product performance and promote product longevity. Replace your old or leaky flush valve with an OEM Kohler Part
Features
- Kohler Genuine Part
- Canister flush valve kit for Kohler Cimarron toilets
- 3" canister with a 3" outlet
- Compatible with Kohler Cimarron tank model number K-4634
- Look inside the back wall of the toilet tank to identify tank model number
- Complete assembly with tank-to-bowl gasket
KOHLER GENUINE PART 87998 FLUSH VALVE KIT, Small
Kohler
Product description
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- Flush valve kit for Gabrielle, Santa Rosa, and other KOHLER toilets
- Compatible with the following KOHLER models: Santa Rosa 3323, 3803, 11899, Gabrielle 3322, 14257, 14258, 14286, Kathryn-3324, 14268 and other various models
- Corosion resistant
User questions & answers
| Question: | what is the flush valve kit for k3435 toilet |
| Answer: | Yes that is when they are replaced. Buy the authentic Kohler flapper valve. I tried HDepot replacement and it was a joke and still was the same price as the Kohler one. |
| Question: | When I was taking mine out, I broke the cross on the bottom that held it in place... does this come with a new one of those |
| Answer: | I've had it for about 5 months and the chain has never broken. You may want to check the tension on yours or return it as defective but get another one . |
| Question: | is this the replacement |
| Answer: | On the inside of the lid is a paper attached to the top that is covered in plastic. On the right side is a drawing. About half way down on the right side you wil see picture of chain and flush ball (flapper). Just to the left is the number 85160 that matches the number for the Koehler 2 inch flapper. Hope this helps. |
| Question: | anyone know of a video that shows how to take out the old assembly and put this one in? I can find only videos on replacing just the flapper |
| Answer: | my toilet is a K4620 and it works great... In doing my research, this was the flapper valve recommended for the Kohler 4620. So YES |
Product features
KOHLER GENUINE PART 87998 FLUSH VALVE KIT, Small
Kohler GENUINE Parts are designed by Kohler engineers to maintain original product performance and promote product longevity.
Features
- Kohler GENUINE Part
- Flush valve kit for Gabrielle, Santa Rosa, and other Kohler toilets
- Compatible with the following Kohler models: Santa Rosa 3323, 3803, 11899, Gabrielle 3322, 14257, 14258, 14286, Kathryn-3324, 14268 and other various models
- Corrosion resistant
KOHLER GP1105825 Flapper with Float Kit
Kohler
Product description
Flapper and Float kit for STERLING toilets. For replacing or installation in 1.28 GPF toilets. Only includes the flapper and float. Genuine Kohler Parts mean long life and high quality.
From the Manufacturer
Flapper and Float kit for STERLING toilets. For replacing or installation in 1.28 GPF toilets. Only includes the flapper and float.Genuine Kohler Parts mean long life and high quality.
- Kohlerflapper with float kit for sterling toilets, 1.28 gph - 2475627
- This is highly durable
- This is manufactured in MEXICO
- Genuine KOHLER product
- For use with STERLING toilets only
- Only for use on toilets with 1.28 GPF
User questions & answers
| Question: | Is this a 2" or 3" flapper? (drain hole dia |
| Answer: | The only guess I can make is that if there is a bar going across the top, it won't fit an older one-piece Kohler toilet so this differenciates it right away. I have the older model so I need this flapper without the black bar. The bar fits between the two extended arms you see in the picture. I made the mistake of ordering the one with the bar, model #GP84995, and it just didn't work. This model, GP83064 is the only one I found that sits on the opening properly and doesn't leak. I think my toilet is from 1989, when my home was built. |
Kohler GP89825 FLAPPER
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2" flapper compatible with Portrait one-piece toilet 3357
- Corrosion resistant
- Country of Origin: China
User questions & answers
| Question: | Does this flapper fit portrait toilet |
| Answer: | No that I know, the flapper seals the hole on the lower part of the water box. |
Kohler BLUE ASSEMBLY PART GP87449 FLAPPER WITHOUT FLOAT, 2
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Blue
User questions & answers
| Question: | I purchased the flapper with the float but it closes too quickly and doesn't allow a good flush. Has anyone had a problem with this flapper |
| Answer: | Yes it is working - I don't know about a styrofoam filling? |
| Question: | What does the 2-inch size refer to? My Kohler toilet's flapper is 3-inches diameter across the top of the flapper over a 2-inch valve seat hole |
| Answer: | My special thanks for your prompt delivery. The plumber and I were amazed how quickly the order arrived. Just a few minutes for installation and the flapper worked fine. |
Kohler Flapper Class 5 3-1/4" Red
Kohler
- 3 1/4" flapper
- 3 1/4" made with corrosion resistant material
- Compatible with the following Kohler models: Memoirs 4485, 4491, 3509, 3515, 3532, 3542, 11461, 4473, 4492, 3511, 3526, 3533, 3548, 11460, 11968, Bancroft 4633, 3487, Devonshire 4708, 3503, Cimarron 4634, 3496, 3497, 3499, 11465, 11466
User questions & answers
| Question: | What does the 31/4 refer to |
| Answer: | yes it will fit 85160 kohler |
| Question: | Is this part |
| Answer: | yes |
| Question: | What toilets does this fit |
| Answer: | yes |
| Question: | does this fit Kohler 4634AA |
| Answer: | The bottom is round. If you are having difficulty locating the correct part call kohler with the toilet info found stamped inside the tank. |
Kohler GP49114 Flapper, 2 In, Red
Kohler
Product description
Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
From the Manufacturer
Protect the warranty on KOHLER products, always look for the KOHLER GENUINE PARTS logo. KOHLER GENUINE PARTS are designed by KOHLER engineers to maintain original product performance and promote product longevity.
- Protect the on KOHLER products, always look for the KOHLER GENUINE PARTS logo
- 2" ball flapper with chain included
- For older, two-piece 3. 5+ gpf toilets
- Replaced black style
- Compatible with the following KOHLER Models: Cayuga 3440, 4509, Highline 3527, 4518, 3518, 4524, Wellesley 3441, 4504, Vintage 3410, 3411, 3412, 3413, 4515, 4516, Wellington 3415, 4504, 3500, 3502, 3504, 3510, 3512, 3514, 4520, 4524, 4556, Bolton 3450, 3475, 4505, 4509, Solstice 14076, Evensong
User questions & answers
| Question: | Will this fit a Koehler model 4519 from |
| Answer: | Hello, my name is Dustyn with Kohler Customer Service. I am happy to assist you with your part question. This part is the Kohler 1080961 and does not represent model number 1080691. If you need any additional assistance please contact the Customer Care Center at 1-800-4KOHLER.Thank you for choosing the Bold Look of KOHLER. |
| Question: | Does this fit kohler 3402P circa |
| Answer: | Here's a video showing the installation process. https://www.youtube.com/watch?v=_96_yx3-boQ Where this fellow says to use Olive Oil as a lubricant I used Hayward Pool and Spa Lube on both sides of the new seal. Otherwise the removal and installation process I used is exactly as shown in the video. |
Latest Reviews
View all
Kids Parachutes
- Updated: 01.03.2023
- Read reviews
Chair Cleaner
- Updated: 11.03.2023
- Read reviews
Replacement Candles For Chandeliers
- Updated: 17.04.2023
- Read reviews
Bluetooth Dongle For Pc Windows 10 Airpods
- Updated: 12.03.2023
- Read reviews
Multi Cooker Crock Pot
- Updated: 24.07.2023
- Read reviews