11 best way to cut aluminum sheet

Product description

Crescent Wises has taken the aviation snip to the next level with the advanced metal Master aviation snips. The precision cast molybdenum blades have conk ground Serrations which allow for more uniform Serrations that provide a cleaner cut every time. They feature extended pivot bolt life due to the superior free float design. The spring action design allows for fast, effortless feed. The all new latch design provides ergonomic single handed operation for left or right handed users. New extended non slip handle grips give users better control while cutting. The new generation of Crescent Wises metal Master will cut over 8 miles of steel and feature up to 10 times longer cut life than traditional aviation snips. They are available in left/straight cut, Right/straight cut, and straight cut.

From the Manufacturer

Wiss compound action snip with serrated blades to grab hold and aggressively cut through material, compound action to multiply the hand's force by five times and a self-opening spring action for a smooth low effort feed. The industry standard - the professional’s choice.

• Cuts straight and slight curves with yellow handles for quick identification
• Precision cast molybdenum blades with conk ground edges and serrations for cutting low carbon, cold rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior Design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring action for fast, effortless feed

User questions & answers

Question:	Would these be good for cutting the rusted metal off of autos, or should I be looking for a different type/angled cutters
Answer:	Did not really understand the question. This cutter works nicely and I am happy I bought it. Don't know anything about 3 piece or made USA.
Question:	Dear Seller!! Wiss M3R, It's includes 3 piece and made USA?! let me know, please! Thanks
Answer:	The packaging in the image appears to indicate that it'll cut 18-gauge.
Question:	Will this shear able to cut precious metal sheets up to 20 gauges and thinner?? I am a jeweler designer and using saw is pain in the neck and time con
Answer:	These snips will cut a penny. Hold the coin with a pair of slip-joint pliers as it has a tendency to twist. That made things much easier.
Question:	will this cut a penny in half
Answer:	this is only tightener, both ends of straps are getting in, this tool is making need tension between both ends. It is not cutting, it is not binding at all. For binding you need clamps and clamping tool.

Product features

Next Generation Aviation Snips

Snips made to earn the trust of a new generation. Continuous improvement means never being satisfied. That’s why these new Next Generation snips last 60% longer and require 20% less force to cut on average compared to our snips from just five years ago.

• Precision cast molybdenum blades with CNC-ground edges and serrations for cutting low carbon, cold-rolled 18 gauge steel
• Blade serrations spread cutting force across jaws improving cut quality and tool life
• Superior design prevents tears at end of cuts by controlling blade bypass and minimizes folding and burrs
• Ergonomic, single-handed latch operation for left or right handed use
• Free float design on the pivot bolt provides longer life
• Spring-action for fast, effortless feed
• Handles have built-in stops providing consistent operation and blade opening
• Ergonomic, single material non-slip handle grips provide excellent control and easy cleaning with built-in hang hole for convenient storage
• Designed, Engineered, and Manufactured in the USA

Product description

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

• Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute
• Attack up to 20 gauge stainless steel and 18 gauge sheet metal
• Lightweight design limits fatigue during operation
• Utilizes a powerful 4-amp motor, curling the metal as it cuts
• Swiveling head rotates a full 360 degrees to meet the needs of any project

User questions & answers

Question:	Will it cut the plastic on a truck truck bedliner
Answer:	I found it cuts vinyl soffit with no trouble, neat, efficient and quick. I think they are similar.
Question:	will this cut the alum side panels on enclosed trailer
Answer:	Easily, I've used it on 1/8th thick T6 alum without any issues.
Question:	Does it come with a case
Answer:	Mine did not come with a case.
Question:	How well will this cut 29 gauge galvalume rib steel roof panel? i see the spec for 18 gauge metal
Answer:	I cut 28 gauge steel with it with no problem 29 gauge is thiner yet ( smaller the # thicker the steel ).

Product features

Shear Metal. Sheer Power.

Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.

360-Degree Swivel Head

Pivot the head 360° to help accommodate comfortable cuts from any angle or direction.

Cut up to 18-Gauge Metal

The powerful 4-amp motor slices through 18-gauge sheet metal and 20-gauge stainless steel.

Variable Speed Operation

The pressure-sensitive trigger varies the strokes per minute from 0 to 2500 SPM depending on the pressure applied.

Double Cut Design

The double-cut blade configuration creates a 1/4-inch ribbon of curled metal during operation.

Lightweight Design

The lightweight ergonomic design weighs in at a mere 4.7 pounds, limiting fatigue during operation.

3-Inch Turning Radius

Cut circles with radiuses of 3 inches and up to help take on projects with a lot of turns and curves.

• The unique 2-3/16" wide tube rail construction keeps the PRO-Grip Clamps light and easy to use, yet more rigid than other similar clamps that are available.
• No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
• Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
• Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
• How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
• The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

User questions & answers

Question:	can you hook two together to make
Answer:	You can’t hook together
Question:	The description says "The clamp rails accept many different accessories..." but I dont see any accessories. What is available
Answer:	I havent used them with accessories yet, but they do have 2 slots that would accept “t” bolts, and possibly hex bolts, so any accessory that works with “T” track should work with these. Specifically hold down clamps, and stops come to mind, but I believe you can also make home made sleds for a saw and/or router too.
Question:	Do the measures have metric? Also, do they slide
Answer:	No metric scale. The plastic rulers are not attached well, mine slid out when I hung them up. Had to use some double side tape to keep them in place.
Question:	Is there a Router Adapter available
Answer:	There is no specific router adapter (that I am aware of existing); just use your router base against the straight edge of the clamps, like you would with any other router base guide.

Product features

The Original ProGrip Straight Edge Guide System

No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.

Cut Straight on Large or Small Panels

The ProGrip Straight Edge Guide Clamps are the perfect solution for cutting larger panels down to size. With the unique clamping assembly along with the rigid aluminum rails, you'll be getting your projects done in no time. The ProGrip Clamps also provide you with a better way of cutting sheet goods. Typically we may use a table saw to do so, but we all know how cumbersome the large sheets can be, especially when its only one of us doing the work.

Cut Dados All Day Long!

Cutting dado slots for shelves can be challenging. The ProGrip Straight Edge Guide Clamps are the ideal way for cutting dados accurately and cleanly with your hand held router. Simply align and set the clamp exactly where you need it to be, then rout the dado slot. It truly is that easy!

Contractor Grade Materials and Construction

Each ProGrip Straight Edge Guide Clamp is made from a single piece of extruded aluminum. The extrusion has been designed to be extra rigid as well as lightweight. Perfect for the everyday rigors on the job site or around the workshop.

Cut Straight Lines Every time

It doesn't matter if you're using a circular saw, a router or even a trim router the results are the same. Simply make sure your ProGrip Straight Edge Guide Clamp is properly aligned and secure and you will be making straight cuts ever time you use it!

Extra Width For More Rigidity

The ProGrip Straight Edge Guide Clamps have an extra wide rail. This gives you more surface are to work with accessories or shop made jigs and fixtures you create. Both sides of the rail have identical track profiles making the clamp even more versatile.

Attach ProGrip Clamps quicker and easier than most any other clamp!

Product description

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand. Attachment only, drill not included.

• Able to cut up to 18GA material
• 360 degree swivel head for maneuverability
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills
• Able to cut up to 18GA material
• Connects via standard 1/4-inch hex shank
• Compatible with most 18V-20V impact driver and drills

User questions & answers

Question:	Does this tool work on Bosch portable drills and impact drivers
Answer:	DWASHRIR works with most 18V-20V impact driver and drill tool brands.
Question:	Will it fit Bostitch
Answer:	Connects via standard 1/4-inch hex shank Compatible with most 18V-20V impact driver and drills
Question:	Can it cut through angle iron, and a garage door track
Answer:	Itsmat the most it will cut is 18 gauge sheet metal
Question:	Will it fit on a makita impact drill
Answer:	Well It just happens that I am using the shears with one of the many Makita impact drivers but it wasn't without a little preparation. The clamping mechanism off the arm has the two pins that insert into retaining holes on the drill body, but mine did not have them so I simply bore a hole on each side in places that the pins could go. It took me about 5 minutes. Now it fits fine and works very well.

Product features

DWASHRIR Impact Ready Shears Attachment

The DEWALT DWASHRIR Impact Ready Shears Attachment is able to cut up to 18GA material including but not limited to: Sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber. This tool features a 360 degree swivel head that allows for maneuverability when cutting. Connects via standard 1/4-inch hex shank. This attachment works with most 18V-20V impact driver and drills, regardless of brand.

Product description

The product is 7-1/4x60 ALU Circle Blade. Easy to use. The product is manufactured in China.

From the Manufacturer

The Lenox Tools 21882AL714060CT Metal Cutting Circular Saw Blade 7 1/4-Inch by 60 Teeth Aluminum is a faster way to cut metal. The Blade is titanium carbide tipped which resists material build up. The Blade also provides less burring than abrasive blades, which eliminates the need for secondary grinding and reduces material burning.

• The product is 7-1/4x60 ALU Circle Blade
• Easy to use
• The product is manufactured in China
• Titanium Carbide Tipped resists material build up
• Less burring than Abrasive cutting
• Reduced Material Burning
• Triple Chip Grind for added durability
• Resharpenable

User questions & answers

Question:	Can I use Lenox blade 14" 80T with evolution rage
Answer:	It is very heavy. But I love it.
Question:	Max rpm for this blade
Answer:	Thank you for your inquiry. The Anolon Advanced Hard-Anodized Nonstick Roaster is not stovetop suitable. We do not recommend placing the roaster on the stovetop. The roaster is suitable for the oven only. We hope this information is helpful.
Question:	does it have a diamond shape knock out for the arbor
Answer:	Hello Consumer, Thank you for your inquiry. The Anolon 84139 16" x 13" Oval Advanced Hard-Anodized Nonstick Roaster Set, Large, Bronze, is not to be used on the stove top as it not to come in contact with direct heat source. We hope this information is helpful to you. Thank you for allowing us to be of service to you. Kind regards, Audrey Consumer Relations
Question:	What thickness of steel can this blade cut? I want to use it with 3/8" thick steel plate
Answer:	Thank you for your inquiry. The Anolon 16" x 13" Oval Advanced Hard-Anodized Nonstick Roaster can hold up to 24 pounds. We hope this information is helpful. Thank you for allowing us to be of service to you. Sincerely, Danelle Consumer Relations Representative

Product description

The JessEm Clear-Cut TS Stock Guides for your table saw offer superior control on your workpiece by securely holding it in position to achieve safer, smoother, and more precise cuts. The unique guide rollers mounted on a 5-degree angle effectively steering your stock towards your fence. This angle causes the roller to hold with more force if the wood tries to move against the direction of the feed. Under spring pressure, the roller arms ensure your work is held firmly in place. Rollers are fitted with one way roller bearings to ensure each roller spins in the direction of the feed to prevent kickback.

Fast and Easy Set Up

The guides lock into position along the track with a twist of the anodized aluminum clamping knobs. Grip force urethane rollers hold your stock securely in position. When not in use they tuck away in behind the surface of your fence.

Perfect for Boards or Large Panels

The guides have 3-1/8" of total vertical travel and can accommodate a maximum stock thickness of 13/16" above the mounting surface when mounted to the T-track. The Clear-Cut TS Guides give you complete control of your stock even when routing wide boards or large panels. The dual action of the guides will pull your work tight to the fence.

Material and Construction

The guides are CNC-machined from 6000 series aluminum and anodized for appearance and durability. The roller axels are machined from cold rolled steel and case hardened for durability, while rollers are designed from wear-resistant acetal resin. Traction tires are molded out of urethane for long life and superior grip.

• EASY SET UP: The guides lock into position along the track with a twist of the anodized aluminum clamping knobs. Grip force urethane rollers hold your stock securely in position
• ANGLED ROLLERS: The unique guide rollers mounted on a 5-degree angle effectively steering your stock towards your fence. This angle causes the roller to hold with more force if the wood tries to move against the direction of the feed
• FOR 13/16" THICK STOCKS: The guides have 3-1/8" of total vertical travel and can accommodate a maximum stock thickness of 13/16" above the mounting surface when mounted to the T-track
• GUIDES CONSTRUCTION: The guides are CNC-machined from 6000 series aluminum and anodized for appearance and durability
• ROLLERS AND ROLLER AXELS: The roller axels are machined from cold rolled steel and case hardened for durability, while rollers are designed from wear-resistant acetal resin

User questions & answers

Question:	What are the dimensions of the o-rings? id/od/width
Answer:	Not sure whether the depth varies by model. I have two different ones and one is about 2 inches deep and another is about 3 inches. Neither is 3.5 inches.
Question:	Can someone tell me how tall/thick the mounting rail is
Answer:	Thank you for your great question. The Anolon Advanced Hard Anodized Nonstick Grill Pan is constructed from heavy-duty aluminum that heats fast and evenly to help reduce hot spots. Although not induction suitable, this saucepan is suitable for use on glass, ceramic, gas and electric stovetops, also oven safe to 400°F. We hope this information is helpful.
Question:	Can you install this on a sawstop premium fence
Answer:	From edge of handle to other edge of handle is 15 1/2 inches. Width is 11 3/4 inches and height is 6 1/2"
Question:	Would appreciate knowing if anyone has attempted to use this with a standard Saw Stop fence
Answer:	no

Product description

Keep your kitchen looking new and fresh with Broan's Backsplash Plate! This plate is the perfect match for your appliances. Constructed of durable stainless steel, this backsplash is reversible for matching your decor. It provides easy clean-up of cooking splatter as it protects the wall behind your cooking surface. This backsplash installs easily with four screws (not included) for your convenience. The material thickness is only 0.019- 0.023 so it lies nearly flush against the wall for a clean look. Mounting screws are not included, four #8 screws are needed for installation of backsplash. Measuring 24" x 30", Broan's Backsplash Plate will make cleaning your kitchen easy!

From the Manufacturer

Since 1932, Broan-NuTone LLC has led the industry with forward-thinking residential ventilation products, unsurpassed built-in convenience products and superior customer service. While global expertise plays a critical role in Broan-NuTone's ability to being able to meet and exceed the needs and desires of homeowners and designers alike, Broan-NuTone is very proud of the fact that over 80 percent of their products sold in the United States are designed, engineered and manufactured in the United States with U.S. and imported parts. Manufacturing operations in the United States are located in Hartford, Wisconsin and Cleburne, Texas, with customer and technical services located in Hartford and in Cincinnati, Ohio. Broan-NuTone is committed to developing revolutionary products that improve the indoor environment as well as implementing procedures to preserve the outdoor environment. Broan-NuTone offers a wide selection of products that help meet the requirements of all three major green building programs: ENERGY STAR, U.S. Green Building Council's (USGBC) Leadership in Energy and Environmental Design (LEED) for Homes, and the National Association of Home Builder's (NAHB) Model Green Home Building Guidelines. Broan-NuTone's inspiring heritage provides the foundation for its three award-winning, global brands - Broan, NuTone and BEST. Broan is the industry leader of range hoods, ventilation fans, heater/fan/light combination units, Indoor Air Quality (IAQ) Fresh Air Systems, built-in heaters, whole-house fans, solar powered attic ventilators and trash compactors. NuTone holds major market positions in door chimes, central vacuum systems, stereo intercom systems, home theater speakers, medicine cabinets, ironing centers, ceiling fans and ventilation fans. BEST range hoods are the "Ultimate in Kitchen Ventilation" featuring state-of-the-art performance and Italian design.

• KITCHEN BACKSPLASH: Backsplash works great for keeping your kitchen walls looking new and clean from cooking splatters
• CUSTOMIZABLE: Backsplash has a reversible stainless steel finish to allow you to choose whichever side works best in your home
• EASY INSTALLATION: Set-up is easy. Mounting screws are not included; four #8 screws needed for installation of backsplash
• THIN MATERIAL: Material thickness is only 0.019 - 0.023 so it lies nearly flush against the wall for your convenience
• IDEAL SIZE: Backsplash measures 24" x 30", perfect for your kitchen or cooking area

User questions & answers

Question:	This merchandise is advertised by Amazon in 5 different colors but no option to change it. Was anybody able to order it in black color? Pls advise
Answer:	Wondering the same. Would like to purchase the black option shown....?
Question:	can we install this over backsplash tile? If yes, how to install? using screws or liquid nails
Answer:	Absolutely! That's exactly what I did. I positioned the panel and marked the 4 holes where the screws will go through the tiles, then drilled the appropriate size holes for the hex head stainless steel screws (bought at Home Depot). I used construction adhesive to be the primary bond for the panel. Important!! Do not apply too much pressure when pressing the panel against the tiles to avoid dents which will show under the lighting of the range hood. By the way, don't use Windex or a similar ammonia chemical to clean the stainless steel panel, because it will leave a haze and streaks. Instead use a sponge with hot soapy water (dish soap)... wiping only in the direction of the grain in the stainless steel.
Question:	Can this be cut....we have an outlet that needs tobe cut out..stainless is harder then sheet metal
Answer:	It absolutely can be cut; an ablative heat shield it is not. It's thin - like really, really thin: literally the thickness of a playing card - so you can cut with a pair of small tin snips. The problem there is doing so will add dents or creases, unless you really know what you're about. I'd advise clamping it to a sheet of plywood and using a cut-off wheel on a Dremel or other rotary tool. WEAR GOGGLES AND GLOVES, and cut a little out from the actual edge you want to keep, then use a file to smooth out any burrs.
Question:	Is it at all magnetic
Answer:	lower grade stainless like 301, 302 and 304 will be magnetic but not a lot of holding 312 and 316 surgical stainless is not magnetic

Product features

24-Inch x 30-Inch, Stainless Steel

Help keep your kitchen looking like new, with a Broan splash plate in the perfect match to your appliances.

Provides easy clean-up of cooking splatter as it protects the wall behind the cooking surface. Installs easily with four screws. Material thickness is only .019 - .023 so it lies nearly flush against the wall.

Mounting screws are not included; four #8 screws needed for installation of backsplash.

Product description

Cuts 2"-12" (51-305 mm) holes in sheet metal including up to 20 gauge galvanized steel

The Malco 2-Inch-to-12-Inch Sheet Metal Hole Cutter Accessory adjusts for cutting varying size holes in galvanized sheet metal. This hole cutter installs into the chuck of a standard electric drill as small as 1/4-inch. It stores easily in a tool box and features a lightweight aluminum frame and high-speed bearings at the top and bottom of the drill shaft to assure perfect cutting balance and long cutting life. This 20-gauge capacity Malco sheet metal hole cutter comes with replaceable cutting bits.

From the Manufacturer

Malco HC1 Sheet Metal Hole Cutter, adjusts for cutting 2" to 12" holes in galvanized sheet metal. Installs into a standard electric drill as small as 1/4" and use the same No. CB mill type cutting bit. Stores easily in a tool box and features lightweight aluminum frame and high speed bearings at top and bottom of drill shaft to assure perfect cutting balance and long cutting life.

• Cuts 2"-12" (51-305 mm) holes in sheet metal including up to 20 gauge galvanized steel
• Commonly used by HVACR and Roofing Professionals
• Combination English/Metric diameter gauge
• High-speed bearings assure perfect cutting balance and a long cutting life
• Installs into the chuck of a standard electric drill as small as 1/4-inch
• Made in the USA

User questions & answers

Question:	How well does it cut sheet plastic
Answer:	The inside dimensions are 7 3/4" wide. Same W or Length as it's a square. Inside height is 2 3/8" - just short of 2 1/2. Outside dimensions: Width is 9 3/4" one side, and 12" on the sides that include the handles added into the measurements.
Question:	Can it cut circles in 20 gauge stainless steel
Answer:	About 3-3 1/4 deep to rim. It is a good size to own.
Question:	Can I cut through wood with this
Answer:	I believe so . Although I have not used mine in this way . I can say that I've had zero sticking issues , using mine . I hope this helps .
Question:	can I cut 16 gage stainless steel with this tool
Answer:	Mine is red Inside dimentions Length= 11 1/8 inches Width= 8 inches Depth = 2 1/2 inches
Question:	Do you make a trim piece for corners and for butting seams together
Answer:	It doesn't have the "nonstick" interior that you might think of in a frying pan. The entire pan is made of ceramic - which is easy to clean. Easy, easy. Baked on foods come off with minimal soaking.
Question:	can it be used on a boat floor
Answer:	A plastic knife. Especially when cutting brownies, it leaves a very clean edge.
Question:	Could this be used for a backsplash behind a range top in a kitchen? What is the best way to clean
Answer:	Hi Stephanie - Anolon® cookware and bakeware is manufactured in our Meyer-affiliated factories throughout Southeast Asia, mainly in Thailand and China. While yes, the manufacturing factories are located overseas, the factories are required to follow U.S. manufacturing control measures to maintain the highest quality possible to ensure that all cookware and bakeware is safe for everyday use. We are available to answer any additional questions you may have. Please feel free to contact our Consumer Relations experts by calling 800-388-3872, Monday through Friday, 7:30am to 4pm PT (Pacific Time) excluding holidays.
Question:	Is this a 4'x8' 1/4 sheet
Answer:	Hello Consumer, Thank you for your answer. The Anolon Vesta Stoneware 9-Inch x 13-Inch Rectangular Baker, Umber, is approximately 3 inches deep. Thank you for allowing us to be of service to you. Kind regards, Audrey Consumer Relations
Question:	How thick is it? by the way,we spell from f-r-o-m not f-o-r-m got it
Answer:	Hello Consumer, Thank you for your question. The Anolon Vesta Stoneware 9-Inch x 13-Inch Rectangular Baker, Paprika Red, is approximately 10 inch wide. Thank you for allowing us to be of service to you. Kind regards, Audrey Consumer Relations

Product description

Whether you are veteran carpenter, a homeowner or an outdoor enthusiast, don’t miss out on this powerful and easy to use chainsaw mill! Just attach this lightweight, portable chainsaw with adjustable side bracket to your chainsaw and you're ready for for any job anytime, no matter how large of small the project may be.



Specification:

Condition: 100% New

Color: Silver

Material: Aluminum & Steel

Net weight (approx): 12lbs

Fits: Chain saw with bar length from 14" to 24"



Package List:

1 x Chainsaw Mill

1 SET Assembling Tool

1 x Manual

• ULTRA-STURDY & HIGH QUALITY: Constructed from topnotch heavy-duty stainless steel and aluminum, this portable chainsaw mill can withstand years of high intensity outdoor and indoor use with uncompromised performance.
• EASILY PORTABLE: The lightweight and portable design makes this lumber cutting chainsaw guide easy to transport to remote areas and suitable for outdoor work. And this 48 inch chainsaw mill can be conveniently attached to your chainsaw bar with only a few turns of a wrench.
• ADJUSTABLE: Height and width can be adjusted to cut logs and planking from 1/2" up to 12" thick & 48" wide in regular piece. Portable sawmill 48 inch length fits chainsaw bar length 10"- 48”.
• VERSATILE: This saw milling machine is perfect for homeowners, woodworkers, and carpenters, anyone can easily turn their chainsaw into a portable mill at a low cost.
• SATISFACTION GUARANTEED: Order with your peace of mind assured by CO-Z's usual strong warranty and friendly 24/7 customer service.

User questions & answers

Question:	Where is this made
Answer:	⅜" may be a bit much for this blade to handle. I've used it to cut ¼" and it did well for 3-4 passes. After that it really bogged down.
Question:	Is there a video to see its perfonmance
Answer:	Thank you for your interest in ourAnolon Vesta Ceramics 9-Inch Square Baker. This product is manufactured by Meyer Corp US affiliated companies in Thailand, Italy, and China. All of the products we sell are manufactured using strict manufacturing control measures to maintain the highest quality possible. All factories partnering
Question:	Will this mill for a bar longer than 48 inches
Answer:	Hi Consumer ,Thank you for your question. The Anolon Vesta Stoneware 9-Inch Square Baker, Baltic Blue, is a 9 x 13 inch in size. Thank you for allowing us to be of service to you. Kind regards, Audrey Consumer Relations
Question:	Does anyone have a copy of the instruction sheet
Answer:	We apologize for any confusion. The Anolon Vesta Ceramics 9-Inch Baker is concerned square, not rectangle.

Product features

Get Your Portable Chainsaw Mill

Whether you are veteran carpenter, a homeowner or an outdoor enthusiast, don’t miss out on this powerful and easy to use chainsaw mill! Just attach this lightweight, portable chainsaw with adjustable side bracket to your chainsaw and you're ready for for any job anytime, no matter how large of small the project may be.

Specification

• Condition: 100% New
• Color: Silver
• Material: Aluminum & Steel
• Fits: Chain saw with bar size from 14" to 48"

Package List

• 1 x Chainsaw Mill
• 1 x Set Assembling Tool
• 1 x Manual

Product description

Trusted for over 70 years, Reynolds Wrap Aluminum Foil saves time with cooking and cleanup. This versatile aluminum foil is great for lining pans, covering dishes, and cooking the perfect juicy turkey. Not only that, but when you line your pan with foil, clean up is quick so you can spend more time enjoying loved ones.

• Made in the USA, this package contains 500 Reynolds Foodservice pre-cut pop-up aluminum foil sheets, measuring 12 inches x 10.75 inches
• Convenient pre-cut aluminum foil food wrap sheets are great for restaurants, catering operations, school cafeterias or at-home use
• These aluminum foil sheets were designed to pop up for quick and easy dispensing
• Reynolds wrappers are easy to mold around your food to get a tight seal - perfect for wrapping sandwiches and on the go foods
• Pre-cut aluminum foil wrap provides the perfect amount of foil to cover sandwiches, wraps, burgers and more

Product description

Edge Trim Black Small, Fits Metal Edge

• High quality manufacture.
• High quality materials.
• Contain internal metal clips to grip permanent around the install place.
• Very flexible.
• Easy install. Not need to adhesive.

User questions & answers

Question:	Once this is installed on an edge, can it be removed and replaced if precise cuts are needed
Answer:	1/4 inch
Question:	Looking for something to use around cut wire cage doors for our rabbits. 16ga wire. Would this fit snuggly? Or, at all
Answer:	If you are talking about the neoprene wheels that ride on the stock, they are 1 1/2" OD and about 1 3/16" ID.
Question:	Could this edging be used to edge marine grade carpeting to protect against fraying, etc
Answer:	The track is a flat 1/4 alum plate X 2” wide with a T track in the center of it. It’s a total of 5/8” tall at the T track
Question:	Is the 5 ft 1/16” like the 15 ft
Answer:	As long as the fence has a flat top-mount surface, you should be good to go. Very simple and straightforward to install.
Question:	what is the thickness of the material? the original seems to be about 3/16 inches
Answer:	It works just fine on the stock saw stop fence, have been using them for almost a year and they are integral to our shop now.
Question:	Is this filter designed & produced in the usa? if not, why not
Answer:	Yes. I suggest not cutting anything less than 54 mil / 16 GA thick with this blade. I cut 12 GA steel studs with this blade, it worked great. I love Lenox products.
Question:	What measure and weight does the box have with pieces
Answer:	5800 RPM
Question:	How big are these filters? At the top it says 16x48 but in the description it says 11x7x
Answer:	It has a 5/8" round hole. I don't think any 10" blades come with a diamond Knock Out.