14 best pvc adhesive

Product description

BK Products 1 in. FPT x 1 in. Dia. FPT Black Malleable Iron Tee

User questions & answers

Question:	is this a solvent adhesive
Answer:	I am not an expert but I would say yes it tends to melt thin vinyl.

Product description

PVC Stitch Liquid Patch Glue is #1 SOLUTION to permanently fix RIPS & seal LEAKS on PVC and VINYL (inflatables boats, swimming pools, air mattresses, waders), NEOPRENE (wetsuits), POLYESTER (tents), CORDS and other gear. TOP new generation sealer for neoprene, vinyl, canvas, polyester, eco-leather, Cordura, polyester-based trilaminate, GORE-TEX fabric, and many other fabrics. PVC Stitch Waterproof adhesive – it’s nothing else than a PVC in a liquid state with a carefully selected molecular weight. It dissolves the layer of repaired material, creating a uniform surface. The unique formula allows this repair kit to be more reliable, especially in the conditions of a field repair and eliminates additional steps in the process. Method of use: 1. Degrease the surface thoroughly 2 Apply a layer of PVC Stitch cauck that reliably covers the damage. DO NOT BRUSH! After 2-4 hour your gear is ready to use. Maximum strength is acquired within 24 hours. PVC Stitch Waterproof glue includes: a tube (one)

• #1 NEW Generation Liquid Patch for Patching PVC, Neoprene, Vinyl, Canvas, Polyester, Eco-leather, Rubber, Polyester-based trilaminate, GORE-TEX fabric, Inflatables, Boats, Beach toys, Waders, Air mattresses, tents, condura & other fabrics.
• Ready to use in 2 Hours | Max strength in 24 hours | Life Time Warranty on PVC Stitch Liquid Patch Glue
• Water Resistant Durable Sealer & Greater Damage Resistance of a Panch
• Water Resistant Glue | UV Resistant Compound | Water Proof Sealant | Heat Resistant Sealer | Damage Resistant Repair Kit
• Method Of Use: Degrease the surface thoroughly. Apply a layer of PVC Stitch Glue that reliably covers the damage. Do not brush. After 2-4 hour your gear is ready to use. Maximum strength is acquired within 24 hours. Will not work on nylon based materials. For any questions regarding this product click on "Sold by PVC Stitch" under the Buy Now button and then click on Ask a Question

User questions & answers

Question:	Will this work on an air trak made out of pvc
Answer:	PVC Stitch will work perfectly with any product made of pvc. Degrease the surface with alcohol, give it a minute for alcohol to vipe out, apply PVC Stitch to cover the punch and a bit of surrounding area, do not brush, wait two hours, enjoy. For use with water and high pressure, give it up to 24 hrs for maximum bond effect.
Question:	Will this work on an Intex above ground vinyl pool with a small leak in the floor? Does this product hold up under water
Answer:	PVC Stitch will work on above ground vinyl pools. It will remain flexible, water proof, pressure proof and UW proof after drying. Apply on a dry surface. Give it a few hours for maximum bond until you take it under water. If you use the Reinforcement cord, make sure you cover the cord with the glue completely
Question:	Will this repair a small hole in dish gloves
Answer:	Thank you for the question. The answer depends on the material your gloves are made of. Most common are nitrile gloves - PVC Stitch won't bond with this material. Some dish gloves are made of PVC - that means that PVC Stich will patch your gloves easily.
Question:	Will it bond to Plastic to Silicone Washer
Answer:	Both plastic and silicon are the names of a wide range of materials. If both materials are pvc or vinyl based, then PVC Stitch will work with them. If they are nylon based, then there will be no results. If you’re not sure what material you’re dealing with, probably you shouldn't buy this

Product description

Unit Sold: 1 EachPart Number: R-08000Manufacturer Name: GORILLA PVC CEMENT LLCUPC: 618170080007Weight (lbs): 0.708 Length (in): 2.63 Width (in): 2.63 Height (in): 3.75

• Odorless—breathe normally with no headaches or illness due to toxic odors
• Non-flammable/compatible with Purple primer
• Cleans up with water before it dries

User questions & answers

Question:	Does this start out purple and dry clear? Can label says purple but Amazon label over it says clear
Answer:	No it does not Start out purple. There are other brands that has a purple product but not this one. This one starts out sometimes milky sometimes clear.
Question:	Can you unglue it if you heat it? Some pvc cements come unglued if you warm them with a heat gun. Will this unglue or stayed glued if heated
Answer:	The short answer is no. The long answer is maybe depending on the type of PVC. The thin walled pipe and possibly siding might due to the fact that pvc softens when heated (thin walled pipe) and if there wasn't sufficient pressure (siding & trim boards) while the cement cured, joints that are already weak could come apart when heated. The plastic piping is engineered to have tight joints by way of tapered sockets in the fittings I am not aware of any such design in trim boards or methods to secure them under pressure while the joint cures. Thank you for your interest in Gorilla PVC Cement.
Question:	I've carpet samples (flor) with a vinyl 'bottom' - purch'd so as to prevent staining of rental apt carpet from copper floor art. willthisglue adhere
Answer:	Hello, Our Gorilla PrimaGlue only works PVC to PVC but not to anything else because it is a chemical process. It will however work pvc vinyl to pvc vinyl. Hope this helps. Have a great day!
Question:	will this work gluing pvc pipe to glass? I haven't found anything yet that will work
Answer:	Don't think "glue". Think "adhesive". The kind used to adhere rear view mirrors to the inside of windshields should work pretty good. Look for it at a body shop supply store, or a glass store that does windshield replacements.

Product description

PVC Stitch Waterproof Durable Repair Kit is used as a glue, adhesive caulk, sealant, sealer, patch, glue to permanently fix rips & seal leaks on pvc and vinyl (inflatables boats, swimming pools, air mattresses, waders), neoprene (wetsuits), polyester (tents), cords and other gear. #1 new generation product for neoprene, vinyl, canvas, polyester, eco-leather, cordura, polyester-based trilaminate, GORE-TEX fabric, and many other fabrics. PVC Stitch Waterproof Repair Kit – it’s nothing else than a PVC in a liquid state with a carefully selected molecular weight. It dissolves the layer of repaired material, creating a uniform surface. The unique formula allows repairs to be more reliable, especially in the conditions of a field repair and eliminates additional steps in the process. Why PVC Stitch Waterproof Repair Kit is the #1 solution? #1 NEW generation product for PVC, neoprene, vinyl, canvas, polyester, eco-leather, cordura, polyester-based trilaminate, GORE-TEX fabric, and many other fabrics. High elasticity Water resistant UV resistant Heat resistant Temperature resistant Greater damage resistance High adhesion Easy handling Method of use: Degrease the surface thoroughly Apply a layer that reliably covers the damage After 2-4 hour your gear is ready to use. Maximum strength is acquired within 24 hours. If the repaired item has a cut longer that 1,2 “ (30 mm), use the Reinforcement Cord from the Kit. PVC Stitch Waterproof Repair Kit The Kit includes a tube (one) and an reinforcement cord (one) One tube –0,67 Oz (20ml) Shelf live – 3 years.

• #1 NEW generation durable waterproof PVC glue, sealant for PVC, neoprene, vinyl, polyester, eco-leather, cordura, polyester-based trilaminate, GORE-TEX fabric, and pool liner repair
• The Repair Kit includes a tube & a reinforcement cord. Ready to Use in 2 hours.
• Water Resistant Sealant for Underwater Gear, UV Resistant Adhesive, Heat & Cold Resistant Caulk. Water Resistant Glue
• Greater damage resistance, High adhesion & Easy handling. Will not work on nylon based materials.
• Method Of Use: Degrease the surface thoroughly. Apply a layer of PVC Stitch Glue that reliably covers the damage. If the repaired item has a cut longer that 1,2 “ (30 mm), use the Reinforcement Cord from our Kit. Cover the entire surface of the cord and the edges with the glue. Do not brush. After 2 hrs your gear is ready to use. Maximum strength is acquired in 24 hrs. For any questions regarding this product click on "Sold by PVC Stitch" under the Buy Now button and then click on Ask a Question

User questions & answers

Question:	Will this repair a crack in a convertible roof plastic window
Answer:	Plastic is a general term for a wide range of materials. This product will work with PVC and vinyl-based materials. I'm not sure what material is used for the window. Even if it doesn't, you'll sure find a lot of applications for PVC Stitch.
Question:	Can this be used to attach D-ring patches for a inflatable paddle board seat
Answer:	It depends on the material of the patches. PVC Stitch will work with vinyl and any vinyl-based materials, goretex, and cordura. PVC Stitch was designed for patching the above-said materials in field conditions. You can still use it as a glue to attach one piece to another. Just give it substantially more time to dry - it needs air to dry.
Question:	Will this product work on Intex above ground vinyl pool with small leak in the floor? Does this work well under water and under pressure? Thanks
Answer:	PVC Stitch will work on above ground vinyl pools. It will remain flexible, water proof, pressure proof and UW proof after drying. Apply on a dry surface. Give it a few hours for maximum bond until you take it under water. If you use the Reinforcement cord, make sure you cover the cord with the glue completely
Question:	Would this work for patching a trampoline
Answer:	Don't know. Never got to use it. It was hard as a rock and dried up. Threw it away and bought a better product for what I needed to patch my pool

Product description

16 Ounce Regular Bodied Cement

From the Manufacturer

Oatey products can be found in residential and commercial applications and have achieved excellent brand name recognition with consumers. All products are backed with the highest quality technical and customer support programs in the industry

• The product is manufactured in china
• The product is highly durable and easy to use
• Easy installation and easy handling
• Regular-Bodied Clear cement for use on all schedules and classes of PVC pipe and fittings up to 4-Inch for Sch. 40 and up to 2-Inch for Sch. 80
• Lo-V. O. C. Solvent Cement meets California South Coast Air Quality Management District (SCAQMD) 1168/316A or BAAQMD Method 40 and various environmental requirements
• Recommended for potable water, pressure pipe, conduit and DWV
• Recommended application temperature 40°F to 110°F / 4°C to 43°C

User questions & answers

Question:	Will this work on pipes runing my residential pool pump
Answer:	Yes, assuming your pool pipes fit the following parameters: all schedules and classes of PVC pipe and fittings up to 4-Inch for Schedule 40 and up to 2-Inch for Schedule 80 .
Question:	Will this work for electrical conduit
Answer:	This product is for cementing PVC piping. If you are running electrical wiring through PVC pipe, there is no problem.
Question:	Will this work on wet pipe
Answer:	The pipe needs to be dry and clean to apply the cement, per the directions..
Question:	I want to use this to connect pvc pipes from the air conditioner run-off. Do the pipes have to be completely dry to use the primer and cement
Answer:	I would recommend it. Although since the run-off water is running down the inside then you can probably keep the outside of the pipe dry for the cement though. Connector needs to go around the outside of the wet pipe. Make sense? Good luck.

Product features

Oatey Plastic Pipe Cements, Primers & Cleaners

From hot to cold and wet to dry, Oatey has the solvent cement, primer or cleaner to meet your exact pipe installation requirements. Oatey cements, primers and cleaners are developed through extensive research on behalf of the professional plumber.

Options for Every Application

No matter the pipe (PVC, CPVC or ABS), application conditions or job type, Oatey has the solvent cement, primer and cleaner products to fit your needs.

Variable Set and Cure Times

Oatey solvent cement and primer products have variable set and cure times.

Meets Industry Standards

Oatey solvent cement and primer products are UL Greenguard Gold Certified. Meet Lo-VOC, NSF and UPC standards.

Step 1

Determine pipe type and size.

Step 2

Cut pipe square, chamfer and debur. Clean pipe and fitting.

Step 3

Apply primer to pipe and fittings. (Do not use primer for ABS pipe.)

Step 4

Before primer dries, apply solvent cement to pipe and fitting. While cement is wet, push pipe and fitting together with a 1/4 turn of the pipe.

Oatey products have earned the trust of plumbing professionals for over 100 years.

Since 1916, Oatey has provided reliable, high-quality products for the residential and commercial plumbing industries, with a commitment to delivering quality, building trust and improving lives. Today, Oatey operates a comprehensive manufacturing and distribution network to supply thousands of products for professional builders, contractors, engineers and do-it-yourself consumers around the world.

Product description

Gorilla PVC Clear PrimaGlue is a Primer and Glue in One Can and is a Medium Body, Low VOC Formula that is Virtually Odorless, Non-Flammable, Dries Clear and Cleans up with Water. Gorilla PVC PrimaGlue is the Toughest, Greenest PVC Cement on Planet Earth! Gorilla PVC PrimaGlue is the only PVC cement that meets ASTM F656 for use as a primer and ASTM D2564 for use as a cement as well as ANSI/NSF 61 standards for potable water. Gorilla PVC PrimaGlue is tougher that the pipe itself and is Gorilla tested for leakage under pressure. It meets or exceeds NSF, ASTM and IAPMO R&T standards. Gorilla PVC PrimaGlue can be used on schedule 80 PVC pipe and fittings up to 3" diameter and all other classes and schedules through 6" diameter.

• Item Weight: 1.0 lb
• Country of Origin: United States
• Color: Clear
• Brand name: True Value

User questions & answers

Question:	Will this work to patch a bounce house it is vynil
Answer:	This glue is made for pvc. I would not trust it to hold vinyl, especially in a bounce house.
Question:	What is the working time with this glue
Answer:	depends on how much you apply for it to set up
Question:	Is this an appropriate glue for adhering a patch to an inflatable pvc plastic kayak
Answer:	If the product is made of PVC Vinyl yes it will work, I have tested it myself and have spoken to a lot of people who work on inflatable boats and Gorilla PVC PrimaGlue works well. Good luck on your repairs.
Question:	Could this be used to glue pvc fence post caps
Answer:	Yes this product will work on PVC fencing and PVC window trim, which was one of the original uses for the product when it was first invented.

Product description

OPTIMAL USE:

For the best results when gluing, the relative humidity should be less than 60% and ambient air temperature should be between 18C to 25C (65 F to 77F) and not in direct sunlight. Clean the patching area on the boat as well as the contact side of the patch, it is best to use M.E.K. (Methyl Ethel Ketone) patching solvent and cleaner.

WARNING:

Product Content Polyurethane. M.E.K. Harmful if inhaled; eye irritations. May cause sensitization if inhaled. Repeated exposure may cause skin dryness and cracking; Keep away from sources of ignition-No smoking; Don’t breathe vapor / spray. In case of contact with eyes, rinse immediately with plenty of fresh water & seek medical attention. Use Only in well-ventilated areas. Don’t smoke or work near open flames, sparks or other heat sources.

STORAGE:

Glue and all chemical materials are dangerous goods. Keep out of Reach of Children. Store in a cool and safe spot and keep the product quality for up to 3 years.

• Mix 5% hardener (treatment) to the glue before use. Maximum add 10% hardener when in Cold Weather 10C-15C or High Humidity 50-75%. Do NOT exceed a mixture of 10% to the glue. M.E.K. is the thinner for PVC glue. If the glue hardens, you can add up to 10% MEK to the glue to reactivate the glue. Glue mixed with hardener can be kept for up to 6 hours.
• Use a small painting brush to apply 1-3 layer(s) glue on both material surfaces. Wait 5 minutes between applications to allow glue to dry and then attach the two pieces of material together. Once you have applied the patch, work from the center out with something like a teaspoon to force out any air bubbles and then apply pressure to the repaired area for at least 24 hours. Wait 48 hours for the glue to cure before using.
• PVC Glue can be used as one part. For a better result, please do 2 Part glue (glue and hardener) to ensure the overall quality of the repair and extend the life time of the bonding. For any repairs related to air leaks, please use 2 Part Glue. Glue and hardener sealed in the bottles can be kept up to 3 years
• Instruction of Glue Layer applied: 1-2 layers on new fabric surface; 2-3 layers on old fabric surface; 3-4 layers for wood or plywood surface; 2-3 layers for parts or aluminum surface. (The fabric of Hypalon boat, it must has a coating layer on the fabric, sanding the boat fabric to get rid of this coating is a must before gluing.)
• Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK.

User questions & answers

Question:	is the hardener is the same fiberglass hardener
Answer:	No

Product description

PVC Vinyl Cement Glue with Brush 8oz

• NO RETURNS or refunds Allowed on glue, sales are final
• Package Dimensions: 6.604 L x 10.16 H x 6.604 W (centimeters)
• 8 oz
• item package weight: 9.1 ounces

User questions & answers

Question:	Will this work for a hole in a bounce house? Has anyone tried that
Answer:	If it is PVC, then it will do great. There are some other material used to make bounce houses that might not work. Give it a shot with a vinyl patch and see what happens.
Question:	Will this glue new marine grade vinyl fabric on top of a very old and worn vinyl hot tub cover? How much will I need to glue 33 sq ft
Answer:	An 8 oz. container would not be economically feasible for job of your size. To paint both surfaces being joined two times would require at least two quarts of product and a larger brush. But this cement would do the job.
Question:	Does this work as a stand alone product to seal or only to bond two things together? We have a leak in our pool where the liner meets the steps
Answer:	Don't know if it would work on your application … I used it to bond 2 things together … one thing I did find out, was that it works best on actual Vinyl … doesn't work well on rubber I can tell ya that for sure!! Good Luck
Question:	Will this work on patching an inflatable zodiac type boat
Answer:	Yes!This is a very strong glue.I have used it to bond extra PVC fabric to the bottom of a inflatable boat.I also glue D-rings and patches too!This stuff works well for PVC not hyperlon.

Product description

9/16 White PVC adhesive caps

• Cover screws with these easy to apply matching adhesive caps
• 9/16" dia adhesive cover cap
• Pvc adhesive cap
• Color white

Product description

Super-Strong, Waterproof, Flexible Bonds for Vinyl Coated and Vinyl Laminated Fabrics. Highly Resistant to Temperature and Weather Extremes. Excellent for Patching and Sealing. The best PVC cement for inflatable industry. The best Quality and Performance "GUARANTEE". " MADE IN USA". We had tested so many vinyl cement brands from overseas and the quality just can not match the HH-66. The HH-66 vinyl cement drys very fast. It will bond to any vinyl and hold up very tight. We highly recommend customers use HH-66 vinyl cement to repair your inflatables. THIS ITEM CANNOT BE SHIPPED TO CALIFORNIA NOTE: Not for use on fabrics, headliners, carpet, etc... SOLD IN 32oz CANS Federal regulations prohibit the shipment of flammable products by air. They CANNOT be shipped by Next Day, 2nd Day, 3 Day or US MAIL services. These items can ONLY shipped by UPS Ground. These items can only be shipped within the USA. These items cannot be shipped Internationally.

• Bonds Vinyl Coated and Vinyl Laminated Fabrics
• Highly Resistant to Temperature and Weather Extremes
• Excellent for Patching and Sealing
• The best PVC cement for inflatable industry
• Made in USA

Product description

Bodno   mylar adhesive-backed PVC cards are typically applied to proximity/technology cards that are to thick to fit inside a card printer. Mylar offers a greater quality compared to paper backing and allows for easier feeding.

Adhesive backed PVC cards are ideal for printing on most direct-to-card printers. Measuring 3.375'' x 2.125'' (the same size as a credit card), CR80 cards are the standard, most commonly used plastic card size. CR80 10 mil mylar adhesive back cards are also known as CR8010 or CR80.010 cards.

Which is why have made them available in:



- 100 Pack

- 200 Pack

- 500 Pack



BODNO IS BRINGING YOU TOP PERFORMING PRODUCTS THAT YOU CAN COUNT ON.





Bodno   mylar adhesive-backed PVC cards are compatible with all ID card printers They are not for use with inkjet printers.



About This Product:



- Superior/Graphic Quality Cards

- 10 Mil Thickness

- Works Great With All Standard ID Card Printers

- Same Size, Thickness And Mag Stripe As A Standard Credit Card

- Mylar adhesive (sticky) back cards

- Made In USA





At Bodno we take pride in providing top quality products. If for any reason you are not pleased with your purchase, contact a customer care representative so we can be of assistance.

• Mylar adhesive-backed graphic quality PVC cards
• Quantity of 500 cards - packed in 5 packs of 100
• Card size: CR80 .10 mil thickness (standard credit card size)
• For use with all Datacard,Evolis,Fargo,Magicard,Nisca and Zebra ID Card Printers
• Great for use with HID Prox cards

User questions & answers

Question:	Do they have MAG stripe on them already
Answer:	no
Question:	Are these a compatible replacement for the hid ultra card cr-79 w/ 14mil mylar
Answer:	Yes just these are CR80 not CR79
Question:	Do these have a slot pre-punched? says will work with hid proximity cards but those come with slots punched
Answer:	These do not have slots.
Question:	Do the se caras have plastic or paper back
Answer:	The original cards has paper backs and were of the correct dimensions. the new batch we received had a mylar (plastic) back and were too large.

Product description

➤LIIBOT PVC Transparent Adhesive Screws Base

➤No Trace

➤No Drilling

➤No Tool

➤Just need a screwdriver，You can do it perfect.

Color: Transparent

Material: Stainless steel+PVC+ABS+glue

Screw rod Length: 4 - 12mm.

Package included: 2 or 4 No trace stickers nail; 24*Screw 

Installation steps are as follows:

1. Wipe the dust, grease on the wall with clean soft cloth and keep it fully dry.

2. Uncover barrier film on bottom layer. Don't touch sticking surface with hand.

3. Position the position of sticking film, paste the patch affixed to the wall horizontally.

4. Flatten with force to the patch from inside to outside, press each region tightly to evacuate the air in the sticking patch.

5. First fix the movable screw nut, and then move to the appropriate position and fix the fixed screw nut

6. Check that the installation is against the wall.

Notice:

1. Please pay attention that there are limits on painted walls, otherwise it might damaged your paint. Avoid using on uneven surface, the more smooth the wall, the better the results.

2.LIIBOT screw base can hold up to 8 kg/17.6 lbs(Max). But we'd like to suggest no more than 8kg for holding a long time.

3. Please clean the adhesive surface with water if it has dust covered before installation the hook.

4. Do not use it at temperatures above 176℉/80℃

• 【 QUALITY MATERIAL 】Premium steel, ABS, PVC and No trace glue. Make your home beautiful and clean. There is a slight odor when opening the package, which is normal. It will disappear after a short time. Please don’t place the order if you mind this transparent nail.
• 【 SUITABLE FOR WALLS 】Works on various surfaces including wood, tile, ceramic, metal surfaces, and more. Great for mounting shelves, wall organizers, and kitchen racks. DON'T USE ON PAINTED OR PAPER WALLS！Our self-adhesive nails will stick firmly.
• 【 HEAVY DUTY 】Solid, reliable, waterproof, and oilproof, heavy duty can take loads up to 8 kg/17.6 lbs(Max).
• 【 EASY TO INSTALL 】Wipe clean and dry wall, then peel off the cover starting from the bulge. Next press the hook onto the smooth surface for a couple of minutes. Wait 24 hours, before screw sticker is used. LIIBOT screw sticker is easy to clean and reposition without surface damage, and can be reused by simply washing with water.
• 【 WIDELY USED 】Package includes 16 pcs screws of different lengths, 4pcs x 12mm, 4 pcs x 10mm, 4 pcs x 6mm and 4 pcs x 4mm, to meet different needs in your room.

Product description

The Raven Gorilla Purple PVC Cement Medium Body PrimaGlue is a self-priming PVC pipe glue that requires no additional primer thus saving time, money and labor, all without exposure to nasty solvents. Unlike other PVC glues, this PrimaGlue is virtually odorless and cleans up easily with water rather than acetone. These qualities and more make this PermaGlue perfect for under-the-sink jobs and home remodels. It’s Gorilla tested for leakage under pressure. Gorilla PVC is the only PVC Cement that meets ASTM F656-02 for use as a primer and ASTM D2564-02 for use as a cement. It’s the first cement so tough it doesn’t need a primer because it is a primer. It can be used on Schedule 40 PVC and class 200 PVC up to 6", as well as on Sch 80 up to 3". Great for use on wet or dry plumbing, irrigation, pool and spa, electrical PVC conduit, ENT (electrical nonmetallic tubing), DWV (drain, waste, and vent) pipe and is approved for potable water applications.



Specifications:



Purple PVC Cement-Body Medium

Weight: 8 Ounce

Raven#: R-08000-Purple 1/2 p

• Pvc Cement
• Imported
• Impeccable bonding strength; preserves indoor air quality
• Tougher than the pipe itself; one-step, self-priming
• Odorless- breathe normally with no headaches or illness due to toxic odors
• Non-flammable; no primer required- save time & money; easy-to-use
• Low in voc’s; quick setting medium body PVC cement

User questions & answers

Question:	Will it bond cpvc tp pvc pipe
Answer:	Yes I believe it will . I used it on 6 inch low pressure pipe and it worked fine.
Question:	Will it work on Fiberglass
Answer:	It is for PVC pipe. Works great. All of the instructions on the can (I still have some left) refer to PVC pipe only. Sorry.

Product description

Pvc adhesive cap (52 ea per sheet). Cover screws with these easy to apply matching adhesive caps. 9/16" dia adhesive cover cap.

• Cover screws with these easy to apply matching adhesive caps
• 9/16" dia adhesive cover cap
• Pvc adhesive cap
• Color white

User questions & answers

Question:	Will these work to cover 5/8" screw heads to shockproof them
Answer:	Plastic/vinyl is a good electrical insulator; and theoretically, it should work (if you countersink the screw ). However, I don't think this product is intended to serve this purpose.
Question:	I did not receive my adhesive white cap
Answer:	Contact Amazon directly to deal with the supplier.
Question:	can these be easily removed without damage
Answer:	I have never fully removed any, but I just went to check and I was able to slide my fingernail under one, so I think if you were careful, you could remove them pretty easily.
Question:	What is the difference in the "original new" (contradictory???) and the fastcap? one seems to just be more expensive
Answer:	Haven’t a clue. $4.88 is quite inexpensive to cover unsightly holes.