14 best garage storages

• Avoid Water Damage by Storing Your Items off the Garage Floor. Protect your items and use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 105 cu. Ft. of storage. Dimensions: 96 in. L x 48 in. W x 22-40 in. H. （Accessory hooks and items pictured on the racks are not included.）
• Safe - Buy overhead racks with long ceiling brackets designed to be attached to 2 studs. Combined with 6 vertical posts, it is the optimal structure choice to ensure safety.
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design - More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 48".

User questions & answers

Question:	how do you lift it to the ceiling do you have a crank system
Answer:	I'm not especially strong but I lifted the rack onto a ladder and balanced it there with the help of another shelf, then I attached 4 rubber (heavy duty) bungee cords to each corner and hooked it to the ceiling mount. After those were all attached I could carefully keep tightening the cords by moving the hook further and further into the middle of the rack, lifting it up incrementally. Eventually you get to a point where you can 'hook' the rack onto the piece that comes down from the ceiling mount, so it's supported before you screw it in.
Question:	Do I have to install the rack perpendicular to the ceiling joists as in the video or can I install the rack parallel to the joists
Answer:	As long as the ceiling mounts are installed in a joist(s), then it will work. I installed my units in the corner of my garage, which required some creative mounting, as the studs where not conveniently lined up for a perfect installation. For one of the brackets, I ended up securing it to the wall rather ceiling as there was no stud along the ceiling next to one of the walls.
Question:	Is the ceiling anchor bracket 16 to 24 inches long so one can span perpendicular over two ceiling joists to properly secure the rack
Answer:	Janet,First off, my ceiling joist run front to back in my garage. My racks are mounted on the back wall with the 48" width going front to back and the 96" length side to side. The predrilled mounting holes are spaced 16" apart along the long side and 24" on the side. Therefore, they are ready as you receive them for for both. The vertical adjustable drop straps are mounted every 48" so it doesn't make any difference which spacing your ceiling joist is since every 48" they match up anyway. If you put the rack in a back corner of a garage you could mount it with the short side on the back wall and the long side along the side wall. In that case you would need to either have 24" spacing in your ceiling joist or buy 3 48" (you can buy them this length at a hardware store, Lowes or Home Depot) pieces of angle iron to span 16" joist then use any of the holes available to get the 24 and 48" spacing at the ceiling. Hope this helps.Richard
Question:	What is the weight limit
Answer:	The limit is 600lbs, says so in the description and in the manual. I have 2 of these and I have a good 400lbs on 1 and 200 on the other and they have held just fine. If it fell, it wasn't installed correctly.

Product features

Use the ceiling rack to organize your garage space perfectly.

• Avoid flood damage by storing your things off the garage floor and protect your treasured items.
• Overhead storage makes your garage look neat,and get away from insects and rodents.
• Height adjustable from 22"to 40" ceiling dropdown, so you can customize to your perfect height!

Top quality M8 screws provided.

• Top quality M8 screws provided. All hardware have gone through strict tests.

Tested with triple loading breaking strength.

• Heavy duty 13 Gauge cold-rolled steel construction provides safely loading up to 600lbs.
• The whole set is test with triple loading breaking strength.

More Flexible and secure.

Ceiling brackets are designed to be attached to 2 joists,more flexible and secure.

Product description

An Amazon Brand

• 4-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1400 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 54 inches (LxWxH)

User questions & answers

Question:	Is it hard to put together or take apart
Answer:	Very easy to do both. All you need to take it apart would be to pull off the shelves one by one. I would suggest upside down after removing the top shelf. Then hit lightly with a hammer or mallet from below each shelf to loosen it from the plastic two parts that hold each side of the shelves. Once they are loose they will come apart. When putting it together, the number one thing is to pay attention to the plastic parts because they all say, this side up. You put the side down, you will never get it together. FYI when you unpack the parts a bunch of round black plastic pieces (that look like junk) will fall of, those are ONLY for protecting the posts when shipping so when putting together make sure they are not inside the posts or you will not be able to put it together. The actual parts come in a large bag full of smaller bags, each one is for putting together one shelf. The instructions mention it, but some people are commenting that they are broken pieces because they can't read. lol I'm 70 and I have put together 9, my most recent today. I'm sure you can also. They are sturdy and my older ones have been in use for a decade.
Question:	Does anyone know if there are additional shelves available for purchase
Answer:	Not exactly shure but I did find this: https://www.amazon.com/Honey-Can-Do-SHF350B1436-Shelving-Capacity-14Lx36W/dp/B006Y7A5F8/ref=sr_1_5?crid=346E3HC6296E1&keywords=36x14+wire+shelving&qid=1581975130&s=home-garden&sprefix=36x14%2Cgarden%2C202&sr=1-5 If you need more than one shelf, it's cheaper to buy a whole other unit, use what you need and just ditch the rest or make another tall item storage rack out to it. No need to use the uprights tho if not needed. This racks are kind of addictive...
Question:	Is it possible to turn the shelves around so that the edges of the shelves have a lip
Answer:	People are saying yes, but it is designed for the shelves to have a "top" and a "bottom" so no, you cannot turn the shelves upside down. The weight of the shelve pushes down on the taper, creating a tighter "bind" with the leg. That's the design.
Question:	What is the diameter of the posts
Answer:	I don't know what diameter the other sizes are, but the 30" three tier shelf is only 3/4" diameter. I went off the previous answer when I bought three of these. Boy was I fooled when I received 3/4" poles. Smh!

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1400 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

An Amazon Brand

• 5-shelf shelving unit for your kitchen, office, garage, and more
• Each shelf holds up to 350 pounds (evenly distributed); total max load weight is 1750 pounds
• Wire shelves adjustable in 1-inch increments; no tools required
• Durable steel construction with black-coated chrome finish; adjustable leveling feet
• Product Dimensions: 36 x 14 x 72 inches (LxWxH)

User questions & answers

Question:	Could you set this up as 2 shorter shelfs side by side
Answer:	You would need to check your rack to see in the poles unscrew in the middle. I get the impression there were different versions of these racks. If they do you need a set of 4 caps, 4 threaded inserts and 4 casters or levelers. Check your pole size too, likely either 1” or 3/4” depending on the version.
Question:	Can you order more shelves? I don't want to buy another unit, I just need more shelves to space them closer
Answer:	Whitmor sells the shelves separately for $12.50. You can call Whitmor, Inc at 888.944.8667 or go online. Whitmor links to Amazon.
Question:	where can i download the assembly instructions
Answer:	super simple assembly. take 2 peices of the black thingies. they should have a mark saying top or a dot or something. they are conical so you snap them together on the legs. start on the near bottom of a leg on a ring and slide the cap till it snaps in place. do all 4 on the same ring, 1 level at a time.so caps, snap, shelf. the 1st shelf is the trickiest but once the second shelf is in place it has better stability. if this is not helping, try youtube.
Question:	I'm very frustrated. the plastic shelf holders are not snapping and staying closed what am i doing wrong
Answer:	I've purchased several of these and just have one more thing to add from the other comments. First, from the other comments you can gather that the pieces do not snap together with each other - they snap to the vertical poles. That's an important point left out of the instructions. Second, where most are saying hold them together and slide them down the vertical pole until they snap, you can do that but they most likely will snap in the same location, giving you same size shelves. The shelves are adjustable, so if you want different heights for each shelf, find the groove on the pole that is closest to giving you the shelf size you want. Then you can, making sure the arrow of the 2 interlocking pieces point up, just lay both pieces close to the groove and then you can slide them up or down to find the closest place to that spot where they will snap. One more thing is you need to make sure you put the shelf over the 4 poles as level as you can. Even though the pieces snap onto the pole, they can be knocked off if the shelf hits them too hard on one side or the other if you try to place it on askew. Doesn't have to be perfectly level - I did it by myself - but somewhat hitting all 4 clips at the same time and coming down over them as close to the same time as you can. The lip of the shelf has to be down in order for the shelf to slide over top of the interlocking pieces on each pole - that's what holds them together. Will not work with the lip up. I am a 60ish female with no real mechanical abilities so the first one was the hardest because the instructions left out key points. Hope this helps (I have put together about 5 or 6 of them now in my garage).

Product features

Open Shelf Design

Combining a clean, contemporary look with a conveniently adjustable design, the shelving unit offers open-sided, reliable storage space.

Dynamic Use

A useful addition to any kitchen, storage space, or workshop, each shelf can hold up to 350 pounds (total capacity 1750 pounds, evenly distributed).

Height Adjustable Shelves

Fully adjustable, you can move each shelf up or down in 1 inch increments by clipping the black, plastic sleeves around the metal posts.

Additional Features

Featuring a strong steel wire construction, leveling foot caps, and easy no-tool assembly with all necessary components included.

Product description

The Rubbermaid 30-Tool Organizer Corner Tool Rack offers corner storage to maximize available space. This corner rack features longer-handle tool storage for up to 30 tools. Plastic construction is sturdy but lightweight and easy to move even when holding tools and easy to assemble without tools. The large, solid base provides stability, so it won't tip over even with large tools stored in it. Integrated holes in the top let you anchor the storage tower to the wall. Overall dimensions: 32 in. x 18 in. x 20 in.

Organize up to 30 tools in any corner for more floor space, happier garages, and saner storage sheds with this corner tool rack from Rubbermaid. A large base offers plenty of stability for heavier shovels, rakes, and brooms. With no tools required for basic assembly, the rack also hooks easily to walls with any "S" hook (not included). This garden tool rack organizer is great for storing rakes, brooms, axes, sledge hammers, trowels, pruners, and more, the unit measures 32 by 18 by 20 inches (height by width by depth). Constructed of durable plastic resin, the rack will not rust, dent, rot or peel for years of reliable corner storage.

• Corner storage maximizes available space. Longer handle tool storage organizes 30 tools.
• The garden tool rack organizer's plastic construction is sturdy but lightweight and easy to move even when loaded.
• Easy to assemble without tools. The large, solid base provides stability, so it won't tip over even with large tools stored in it.
• Integrated holes in the top let you anchor the storage tower to the wall.
• Size: 19.4" D x 32" W x 20" H and 23.7" corner to corner. Made in the USA.

User questions & answers

Question:	What about the clearance needed to get tools out that are stored in the holes? Any issues with ceiling heights when getting tools out
Answer:	Yes, I would recommend having a minimum clearance of your longest tool/rake/etc plus about 10 inches when taking the item out of the rack. I would not recommend it storing large/long tools in an area with a low to normal 7-8ft ceiling (run the risk of hitting the ceiling occasionally). I personally have mine in the basement with a 10ft clearance. It would also work well in some of the pre-fab tool sheds that have a high ceiling. Hope this helps.
Question:	What are the dimensions
Answer:	Deluxe Tool Tower™: (#5E28) Size: 20.5" D x 38" W x 34.4" H From Rubbermaid Home Product website. This info apprears accurate from my experience.
Question:	for outdoor
Answer:	I would NEVER recommend to store your tools outside- I buy good tools and I expect years of use from them- putting them outside is throwing money away and not taking good care. CAN this be put outside? Sure- just like anything you own can- your couch for example. But SHOULD you? This is not its intended purpose. I'm not sure it's UV rated (and I wouldn't expect it to be). Maybe keep on the edge of the garage and roll it out? You could ALWAYS replace the casters no problem if they crap out-cheaper than the holder and your tools!
Question:	Is is sturdy without tools falling over
Answer:	I have at least 50 tools in this caddy including a sledge hammer with many other various tools that would destroy my car. I park my BMW a foot from the stand every day and I have tested it like an earthquake would and it is perfect! I would never park my bmw near it if I were scared of it falling over. Difficult to believe how sturdy it is sometimes.

Product features

Rubbermaid 5A47 30-Tool Corner Tool Rack

This tool tower maximizes available space by fitting into the corner. It holds up to 30 tools. Its large base allows for greater stability, and it can be anchored to a wall for additional stability. It is easy to assemble and will not rust, dent, rot or peel.

• Holds up to 30 tools
• Corner storage - maximizes available space
• Large base allows for greater stability
• Ability to anchor to a wall
• Easy to assemble - No Tools required
• Will not rust, dent, rot or peel

• STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted.
• STABLE: Feet height can be adjusted for added stability on uneven surfaces
• EASY ASSEMBLY: No tools required to assemble
• SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage
• TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units
• MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H

User questions & answers

Question:	What is the length between the bars
Answer:	Good question. 42 inches.
Question:	is it possible to add casters to the unit
Answer:	I’m not sure if they have that as an option, but I think if I needed to I could work it out.
Question:	how much does unit weigh in box
Answer:	About this item STRONG & STURDY: Wall mounting brackets included for added strength and safety. Each shelf holds up to 200 lbs. when mounted. STABLE: Feet height can be adjusted for added stability on uneven surfaces EASY ASSEMBLY: No tools required to assemble SPACE SAVER: Maximize garage, home, or shed space with 4 tiers of storage TRUE HEAVY DUTY: This product is almost twice as heavy as other plastic shelving units. What you get is a 30 lb solid structure shelving unit holding 30% more weight than other plastic shelving units MADE IN USA: Engineered with fully sustainable recycled material. Shelf outside dimensions: 20”D x 48”W x 55”H
Question:	Please provide assembly instructions
Answer:	There were no real instructions. There were some 'feet' that took the shelf off the ground, the uprights and the caps on the top. I used a hammer and a knife to take some of the tags off some of the pieces so they would fit. I had to use a little trial and error to put it together. Good Luck!

• High-quality ABS material
• 【IDEAL STORAGE SYSTEM FOR TOOLS】Made of high-quality ABS material, and with the size of 64inch, the adjustable garage hooks is ideal for various tools like rakes, shovel, spade, broom, mop, ladders, chairs, bicycles, brooms, shovels, power tools, and any tool with a rod. Ideal for organizing your home!
• 【MULTI-FUNCTIONAL】Perfect for hanging tools like mops, spades, brooms, shovels, rakes, and other garden tools at the garage, basement, or shed. Or for storage tools with rods at the garage, shed, workshop, closet, basement anywhere else. Easily release by lifting the handle.
• 【Max Capacity 】By adding reinforcing rib on steel plate, each hook of tool organizer bears the weight up to 15LBS(7KG), That means the garage hooks are perfectly capable of organizing most of the tools in your home. And each peg can bear the weight 5LBS(2.5KG).
• 【Last USING FOR YEARS】Made of high-quality aluminum and plastic, and with the sturdy PVC anti-slip coating, easy to grab on to items and keep them securely in place for years, and protect the goods surface from being scratched. Never have to worry about your garage or garden tools falling off again!
• 【PACKAGE LIST】4 x 16inch ABS rail, 16pcs galvanized steel hooks with non-slip vinyl-covered prongs, 20pcs ABS pegs, 4pcs ABS interlock connectors, 20pcs screws, and 20pcs dowels.

User questions & answers

Question:	How long is this garage hook organizer
Answer:	There are 4 plastic rail guide, 16” each, so if you install as individual it will be 16” long, and if you combine 4 of them it will be 64” long. I hope this help.
Question:	Is this sturdy enough to be hung directly on studs without sheetrock or a wall behind? I want to hang it in an unfinished shed
Answer:	I would not recommend it. It's designed to be hung flushed against a wall.
Question:	What size drill bit is recommended
Answer:	Not sure of the size. I used a drill bit smaller then the screw itself.
Question:	I want to buy 4 (same) hooks of this product, can I buy from Amazon? What is the part number
Answer:	There was no parts list, just a description. I love mine.

Product features

Have you ever felt upset by the messy garage tools?

The garage tools hooks can holds mops, rakes, brooms, and can be easily released by lifting the handle.

Use as an individual 16-inch storage unit or combine for up to 64-inch storage length.

This wall-mounted tool holder is great for saving space, and it saves more space out and can store a lot of size items, make your home look much cleaner than before.

This multi-used storage rack features 16 pegs and 20hooks that can hang most of your kitchen, cleaning, metal, sports, and garage hand-held tools securely.

Made of high-quality materials and, our garage tools can hold extremely sturdily for years of use, no need to worry fall off anymore.

• HEAVY DUTY STEEL: built from steel to hold up to 200 lbs of gear!
• INCLUDES 6 STORAGE ATTACHMENTS: 4 large attachments (11" long, 2" wide) and 2 small attachments (5" long, 2.5" wide)
• CUSTOMIZE TOOL STORAGE: insert attachments to 46" long wall track in custom setup to fit the gear and tools you have in your home, garage, shop, or store
• WHAT GEAR & TOOLS WILL IT HOLD? Rakes, shovels, ladders, hammers, backpacks, skateboards, helmets, and more
• EXCLUSIVE PATENT PENDING DESIGN: built to hold everything in your garage, and built to last!

User questions & answers

Question:	Where is it manufactured
Answer:	Not sure where it was manufactured.
Question:	Why is it so expensive for what it is
Answer:	Unfortunately I do not know, was worth the money
Question:	can i hang pruning loppers on this rack
Answer:	Yes. As my husband says, "you can hang just about anything on it, as long as you have it securely attached to the wall." He loves this tool storage rack.
Question:	Why is it so expensive for what it is
Answer:	Compared to many similar products this is a very heavy duty and it is the strong materials that you are paying for. If you just want to hang a couple of light weight brooms there are cheaper options. If you are like me and are gonna hang weed eaters, multiple shovels, and other heavy yard tools this is worth every penny.

Product features

Fully-Adjustable Wall Track

Customizable wall track system includes (45) mounting points to adjust each row of storage. Independent mounting brackets can be aligned with your wall studs for quick, easy installation and maximum strength, up to 200 lbs!

Heavy-Duty Storage Attachments

Solid metal Tool Storage Attachments hold a variety of tools including garden tools, shovels, rakes, power tools, line trimmers, brooms, mops, extension cords, hoses, bags, ladders, and even wheelbarrows!

Quick-Lock Pins for Easy Adjustments

Each Storage Attachment is locked into place with a gated pin for a rock-solid setup while loading and unloading your tools. This system also makes it quick and easy to adjust the spacing between each row of tool storage.

Space-Efficient Vertical Storage

The Omni System allows you to organize your tools up on the wall and out of the way. Clear up floor space in your garage or shop and keep all your tools neatly organized for your next project!

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative storage solutions for your tools, bikes, skis, snowboards, surfboards, skateboards, longboards, paddleboards, kayaks, wakeboards, canoes, fishing rods, golf gear, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next trip!

Product description

The Space Winner utility cabinet is perfect for those areas in and around the home that lack storage space. Even if your garage has shelves installed, you may need a more secure place to keep certain tools and other items. The Space Winner utility cabinet has sturdy doors, and a padlock can even be used to lock them closed. Thanks to its freestanding design, it can be placed just about anywhere. 26.77 L x 14.96 W x 67.32 H inches Polypropylene resin construction is easy to maintain and won't peel, dent or rust 4 adjustable shelves can be configured to suit a variety of storage needs Load per shelf 44 lbs Doors can be padlocked shut; padlock not included Compact design makes it suitable for use in space-challenged areas

• DIMENSIONS: 26.77 in. L x 14.96 in. W x 67.32 in. H. PACKAGING DETAILS: The dimensions on the label on the box (30.7 W x 7.4 L x 32.1 H inches) are the shipping dimensions of the box
• RESIN CONSTRUCTION: Durable polypropylene resin construction is easy to maintain and won't peel, dent or rust
• 4 ADJUSTABLE SHELVES can be configured to suit a variety of storage needs/ load per shelf: 44 lbs
• COMPACT design makes it suitable for use in space-challenged areas.Shields from dust, debris and the elements
• DURABLE freestanding mountable design perfect for storing heavy items
• EASY ASSEMBLY: Easy one person assembly - have it together with just a screwdriver

User questions & answers

Question:	Can it be stacked with another of the same to make it taller? Stack three to make it approximately 9 foot tall. This is to store taller items
Answer:	This unit is over five feet tall in its own, so stacking three of them on top of each other would not be a good idea.
Question:	How tall is this cabinet? The specs on the product page say 32 in. The answer to a previous question says 64 and the picture looks like the latter
Answer:	If you include the small peg legs, it measures about 67.5 inches. I suppose the 64 inches might be without the legs. Not sure. The 32 inches might refer to the size of the product's box but that's just a guess. It's obviously not 32 inches unless that lady in the picture is a midget, lol.
Question:	What are the Dimensions
Answer:	64H"x27W"x15D" very easy to assemble took me like 40mins to put it together no help needed, all you need is a screw driver!! Would recommend, hope this helps 
Question:	How do i get missing parts? i ordered this and it is missing 1 wcs and 2 wid's i called the 800 but they always closed, i do not want to return this
Answer:	You will NEVER get them. I have been trying since March 26th to get a missing part. I have called so many times and emailed all the pics and get nothing. THIS COMPANY HAS THE WORST CUSTOMER SERVICE!!!!

Product features

The Keter Space Winner

The Space Winner Utility Cabinet by Keter is ideal for securely storing items in space-challenged places. Whether you're looking for garage storage solutions or need a plastic cabinet that's small enough to tuck away into a corner somewhere, this Keter utility cabinet is sure to do the trick.

Adjustable Shelves

The Keter Space Winner cabinet comes with 4 shelves that can be rearranged with ease to suit your specific needs.

Solid Construction

This polypropylene resin construction holds up to any home or garage setting with a shelf load capacity of 44 lbs.

Lockable for Extra Security

You can even lock the Space Winner Cabinet to prevent theft or limit access to its contents, giving you peace of mind. Padlock not included.

Product description

Revamp any space in your home with this UltraHD Storage Cabinet! Store all your tools and supplies securely and in style. Conveniently adjust the shelves to your specific needs. These cabinets feature quality powder-coated construction, stainless steel segmented doors, and high-quality wheels and hardware to provide an economical but great-looking answer to your garage organization project.

• Set of 4 5" Wheels (2 wheels with brakes) included
• Stainless Steel Segmented Doors
• Dimensions: 36" W x 18" D x 72" H
• Weight Capacity: 600 lbs total, 150 lbs for each shelf
• Powder Coated Steel Frame

User questions & answers

Question:	Can you add more shelves
Answer:	The cabinet is handily pre-drilled to attach included shelves. Put your heaviest items on the bottom if you're going to add more weight above.. that would be my advice. I've had no trouble with my shelves holding everything stored, arranged light to heavy weight top to bottom.
Question:	Are these assembled? If not, how well do they go together
Answer:	The first one took me about 1 hour to assemble by myself, the other 2 took less than 30 minutes each. Very easy to follow instructions and assemble.
Question:	Is there any way to purchase extra shelves
Answer:	Hello, Thank you for choosing Seville Classics. Yes, we do sell shelves for your Tall Storage Cabinet on our website. You will find the shelf listed as UHD16234S for single shelf purchase and UHD16236S for a 2 pack. Our contact information is provided on your manual if you have any question about our product or need assistance, please contact us directly for faster service. Hope to hear from you, Customer Service
Question:	Does the 72" height include the wheels
Answer:	Yes, the 72" comes with wheels.

Product features

UltraHD Tall 36" Wide Storage Cabinet

• Durable solid steel powder coated body
• Solid stainless steel doors with keyed lock
• Total weight capacity of 600 lbs. (150 lbs. per shelf)
• Set of four 5" Wheels (two w/ brakes)
• Three removable steel shelves (four total shelves)
• 1" bumper profiles for extra protection

This ultra heavy-duty Storage Cabinet can be used anywhere. Store all your supplies, tools and belongings securely and in style. Conveniently adjust the shelves to your specific needs. These cabinets feature quality powder-coated steel construction, stainless steel doors, and high-quality wheels and hardware to provide an attractive solution to your home, office or classroom organization project.

Feel Secure with Style.

• ⚉【High-strength materials and technology】:Aoben garage hooks use high-strength metal and uses an exclusive welding technology to ensure the quality of the product during use.
• ⚉【Various sizes meet different needs】:We have a total of five different sizes and two different models (U-shaped and J-shaped), which can be used in various occasions:garage, garden, bathroom, kitchen, doorway, hang your ladder, bicycle, tableware , Coats and more equipment.
• ⚉【Different endurance of different walls】:The load-bearing capacity of the product varies according to the material of the wall. Plaster wall, wooden wall, brick wall, and different wall surfaces we choose to use different mounting nails to ensure that our products can be firmly fixed on different walls.
• ⚉【Simple installation】:For plaster walls, Mark two holes; Twist the black wide thread screw plug in. For wooden/brick walls, Mark two small holes; Drill a hole and hammer in the white plastic anchor; Twist the steel screw nail into the anchor.
• ⚉【Guarantee of quality service】:All of our Aoben products are designed to provide customers with the most satisfactory service. If there is any problem in the use of the product, we will provide you with the best solution. Let you buy our products with confidence, if any product problems occur, please feel free to contact us.

User questions & answers

Question:	Will the hook skratch bad things
Answer:	No, there is a PVC protective layer in front of the hook, which is very smooth.
Question:	Can you put more than one shovel on the big hook
Answer:	Weight wise, yes.fit two... it would really depend on the type and size of your shovels.
Question:	What wall surface are these hooks suitable for
Answer:	Brick walls, wooden walls, plaster walls, and cement walls are all acceptable. Different wall installations are different. Please read the instructions carefully.
Question:	Is the shovel from China
Answer:	Yes, the quality of Aoben's products has always been worthy of peace of mind.

Product features

How to get rid of a messy garage？

Garage tools, shovels, bicycles, wires, etc., are all in a mess.Don't worry now, Oben's garage hooks are to help you plan your garage space reasonably and give you a refreshing garage.

• 🏀ORGANIZE ALL YOUR SPORTS GEAR: 🏀Kinghouse sports equipment storage cart with 2 storage bin and 4 wire mesh basket. The large capatity storage bin can holds basketballs, footballs, soccer balls, volleyball, helmets, and even athletic shoes. Organize all your indoor & outdoor sports goods on one basket for truly space saving and providing easy access
• 🏈Special design sports storage system:🏈 Bats hanging hook can hold baseball and softball bats, tennis, badminton and hockey sticks; 3 hooks easily hange items such as bags, gloves, ball caps, jerseys and all your other sportswear; metal wire basket can stores baseball and softball bats, tennis, badminton, and pickle ball rackets, as well as lacrosse and hockey sticks.
• ⚾MANY OCCASIONS: ⚾The Rolling Sports Ball Basket features in 4 heavy-duty smooth rolling wheels, Indoor & Outdoor Design, which is easy to move the organizer anywhere and fits in a specific position.It is ideal for the garage, home, Storage room, playroom, gym, playgroup and schools. DIMENSIONS: Overall product: 36.1" L x 16.54" W x 46.5" H, each basket: 17.7" L x 9.45" W, each storage bin:17.7" L x 15.7" W x 17.7" H
• 🏒SIMPLE AND DURABLE STEEL CONSTRUCTION:🏒 Made of a durable coated steel frame, the sports gear organizer offers long-lasting strength and impressive performance. Simple structure makes it easy to install with the help of instruction.
• 🏆100% SATISFACTION GUARANTEED: 🏆Whatever questions you have, we commit 1-YEAR HASSLE-FREE WARRANTY with replacement or money back on our Kinghouse Sport Equipment Storage for you, friendly service will be there for you.

User questions & answers

Question:	Can i take the wheels off and place the rack in a fixed conner in the garage
Answer:	Yes ,you can.  the package came with 4 multil-direction wheels and 4 adjustable nut base, you can choose to install the nut bases instead of the wheels.
Question:	I have one 7 year old boy and one 10 year old girl. They have many toys and balls. Is this product enough to hold everything
Answer:	I have 3 kids, and it fills our needs perfect! Make our home much more organized! The kids actually put the equipment away! it help our kids develop a good habit.
Question:	Can the sports ball cart be moved around easily in the garden
Answer:	Haven’t tried moving it on grass or in a garden. But it works great in our garage and on concrete.
Question:	Can it be moved
Answer:	Yes, it can. it have 4 multil-direction wheels, you can move it indoor and outdoor.

Product features

Organize all your sports gear together

Make your garage, storage room or playroom much more organized!

Help your child develop a good habit of putting the equipment away!

Equipped with top quality smooth rolling wheels

The wheels are durable, and roll very smoothly. It will be easy to move the organizer indoor and outdoor.

Thoughtful and unique design in the base

The tight mesh base make sure the small size things can be stored. Never worry about having no place for your little toys, table tennis, etc.

Easy Installation

Simple structure makes it easy to install with the help of instruction in minutes!

The screws, tools and instructions are included.

MANY OCCASIONS

Keep your favorite gear together in one spot with the Kinghouse Sporting Goods Organizer.

1. The rolling sports ball organizer with 4 heavy-duty wheels, Indoor & Outdoor Design, which is easy to move the organizer anywhere and fits in a specific position.
2. It is ideal for the garage, home, Storage room, playroom, gym, playgroup and schools.

MANY OCCASIONS

MANY OCCASIONS

MANY OCCASIONS

Product description

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those bulky items that take up so much space on the floor, such as seasonal storage, boxes or totes, outdoor furniture, large tools, tires, or just about anything else you can think of. Made of steel construction, the Ceiling Storage Heavy Lift has a unique pulley system that lets you easily load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. The Ceiling Storage Lift easily lowers 8 feet from the ceiling when you want to retrieve or add items. Raise and lower using a hand crank or attach your power drill. It has everything you need to store large items the safe, easy way without your feet ever leaving the ground.

Assembly required; installs into ceiling joists. Order yours today, and reclaim your garage!

The RacorPro PHL-1R Pro HeavyLift Storage Rack lets you load and lift heavy items to the ceiling for storage without the need for a ladder. It helps to free up valuable floor space in your garage or storage area and allows you to store heavier items, such as furniture, lawn mowers, tires, canoes, snow throwers, and more. The heavy-duty 4-by-4-foot platform is built to last and provides 16 square feet of additional storage space in your garage or storage area.

Heavy-Duty Lifting Capacity for Heavier Items

The PHL-1R is both tough and durable, and it's built to handle heavier items up to 250 pounds. The heavy-duty steel support beams and 4-by-4-foot platform are made from high-quality materials that are made to handle tough loads and provide years of consistent performance. The unit is built to lower 8 feet from the ceiling, accommodating storage spaces with taller ceilings. The drill driver attachment allows you to raise and lower the platform using your own drill.

The unique pulley system makes it easy to raise and lower heavy items with minimal effort on your part. With a durable winding axle that works in conjunction with the pulleys and strong nylon cables, the PHL-1R handles the brunt of the weight so you don't have to, while raising or lowering the platform quickly and smoothly.

Safety Lock Ensures Safety and Stability

The innovative safety lock ensures that the load stays locked into place when fully raised to the ceiling. Simply use the winding crank to engage the safety lock when the platform is raised to its highest position, and use the winding crank's integrated hook to disengage the safety lock and safely lower the platform.

An Additional 16 Square Feet of Storage Space for Your Garage

The PHL-1R's tough 4-by-4-foot platform gives you an additional 16 square feet of valuable storage space in your garage or storage area. This allows you to store your lawn mower out of the way during the winter or to store your snow thrower during the summer months, clearing valuable floor space and creating tidier, more useful quarters.

The RacorPro PHL-1R HeavyLift Storage Rack measures 49.25 x 17.5 x 7.25 inches (packaged) and weighs 74 pounds (packaged). It comes in a smooth black finish and includes all necessary hardware. Additional tools required for installation include: stud finder (for drywall ceilings), adjustable or box end wrench, socket wrench, cordless drill/driver, Phillips screwdriver, pencil, and a 4-foot straightedge or chalkline.

What's in the Box

Winding crank assembly, two arm assemblies, two cable assemblies (including nylon cables), three wire grids, two wire beam supports, center spindle square end, center spindle round end, gear drive, Allen wrench, four end caps, 20 hex bolts, four Allen head screws, two hex head screws, two fender washers, eight long machine bolts, 16 washers, eight nuts, 12 "J" hooks, 12 washers, 12 nuts.

• Adjustable - Mounts to any ceiling, adjust to angle ceilings with the built in nylon rings
• Durable - High strength steel allows you to lift up to 250 pounds
• Efficient - Raises and lowers by crank and includes all installation accessories
• Reliable - Steel cables allow for 8ft of vertical lift and securely locks into place
• Reclaim Your Garage - 16 sq feet of additional overhead storage space with the 4 ft X 4 ft design, making more room for the things you want to do

User questions & answers

Question:	Does the rack have to be fully retracted to lock? For example, can it be raised half way and lock
Answer:	You can lock it pretty much any height you want. You raise and lower by turning a loop and the lock puts a pin in the loop so it won't turn.
Question:	Do you need to install any lag bolts in the T-bracket section? Directions only show 4 bolts on each of four arms. I want to straddle a metal i-beam
Answer:	Sorry I don't know the answer to that question. I had a handyman install it who has installed it several times. I know he said he used different stronger bolts that were in the original package and said the unit would now hold up to about 300-400 lbs. without worry. You will love it. It's the best solution around.
Question:	my ceiling is about 18 feet in the garage. Can I extend the cables/controls
Answer:	I have 9' ceilings in my garage and the platform lowers to within 18" of the floor. You could add cable to extend the drop to accomodate the added height from the original point. However your highest lift point would be about 7'6" above the floor. I am sure any alterations would void any warranties to the product. On a side note: I have two now and will be ordering at least one more soon. As far as control rod, you will have to extend it to meet your needs. The directions suggest a 1/2 inch drill but I had a local machine shop turn the insert down to fit a 3/8 drill. I might advise you to not use a cordless drill. I personally would consider going a little lighter on the max weight.
Question:	I'm surprised no one mentions that you have to drill ten holes fairly close together in each joist for the lag screws, according to instructions. Ten seems like overkill. Won't this weaken the joist
Answer:	Most ceiling joists are 2x6 and bigger and I have installed two of these lifts on the same joists and have not seen a problem with sagging or splitting of the wood. Considering the lift will hold up to 250 pounds it needs to fastened securely. If you are concerned about your joists being weakened by drilling I'm sure you could come up with a cripple stud solution where a second piece of wood is fastened to the original joists with three bolts and then the lift is screwed into the cripple studs. Still drilling the original joist but only in three places rather the ten.

Product features

Racor Ceiling Storage Lift

With the Racor Ceiling Storage Heavy Lift you can create 16 square feet of additional storage space without compromising floor or wall space. The Ceiling Storage Heavy Lift gives you a convenient storage solution for all of those items that take up so much space on the floor. The Ceiling Storage Heavy Lift has a pulley system that lets you load and lift up to 250 pounds of storage items to the ceiling and lock securely in place. Raise and lower using a hand crank or attach your power drill.

• Reclaim Your Garage - Use garage ceiling space to store seasonal and unused items. 22'' to 40'' ceiling dropdown provides up to 80 cu. Ft. of storage. Dimensions: 96 in. L x 36 in. W x 22-40 in. H. （Accessory hook and items pictured on the racks are not included.）
• Stability ＆ Safety - With our specially designed longer ceiling brackets that attach to two joists, Fleximounts overhead garage storage racks are more stable and secure compared to others!
• Quality - Top quality screw selected and all hardwares have gone through strict tests. Heavy duty cold-rolled steel construction provides safely loading up to 600 lbs.
• Different - Integrated Grid Design- More stable and sturdy compared to others with separate frame and wire.
• DIY installation with step-by-step instruction. Installation template helps make plan. This overhead storage rack fits all ceiling joist spacing ≤ 24", if joist spacing > 24", only fits the ceiling spacing of 36".

User questions & answers

Question:	Has anyone mounted it inside a shipping container
Answer:	You can mount it any where there is a sturdy ceiling to support the unit with a load on it.
Question:	Could you hang 4 bikes from the 3x8 rack
Answer:	The rack itself certainly could handle the weight of four bikes. The physical space 3‘ x 8‘ would be a little bit crowded. You would need to carefully organize the way each bike is hung.
Question:	Does this thing wobble back and forth? There is no cross brace to support it
Answer:	A: It doesn’t wobble much. If you’re able to install it against a wall, attach the uprights to that wall, it won’t wobble at all. I couldn’t do that so I attached a piece of scrap 2x4 to the right and left corner uprights and the wall that this was 18inches from. Cheap fix. No wobble. I did this for piece of mind more than anything else. BigRed
Question:	What is the true outside dimensions of the rack? I only have 37" of space to work with and want to know if the outside is
Answer:	The outside dimension of the frame is 36" x 96".

• [Additional hooks improve safety]-Our garage hooks add additional hooks to the fixing plate to stabilize the double-arm hooks before welding. Compared with other direct welding hooks on the market, the load-bearing capacity is increased by 10 pounds. It's safer, don't worry that your garage manager will fall again.
• [Practical 14 pieces]-5 types of garage storage racks include 2 large square hooks, 3 medium square hooks, 5 small square hooks, 2 large "J" hooks and 2 small "J" hook up. These garage hangers provide a variety of options to organize your garage, garden, shop, basement or warehouse.
• [Heavy-duty non-slip PVC coating]-Garage hook wall-mounted bracket is made of heavy-duty solid steel, which can bear up to 80 pounds (about 39.9 kg) and can be used for a long time. With a PVC non-slip coating, garage wall hooks can easily fix items, durable and ensure any integrity you want.
• [Special gift & space saving]-Don't know what to give to storage lovers? So, our garage finishing hook is great for anyone who likes to have a neat, clean and spacious garage or any place that needs a hook of.
• [It takes only a few minutes to install]-Heavy-duty wall hooks Just use a drill and screwdriver to hang the wall on a plaster wall, wood or brick wall, and you can store garden tools, hoses, ladders, bicycles or anything.

User questions & answers

Question:	Is there a total of 14 pictures and descriptions? Is Is a set of 14 too many
Answer:	Yes, but the garage hooks used to clean the garage or warehouse, I don't think 14 pieces are too much. I think this set of garage hooks is practical. You can buy a set to try. I like it. They are of good quality, beautiful and well done.
Question:	Are the garage hooks a good option for hanging a ladder on a garage wall
Answer:	Yes, of course. the garage hooks are very sturdy. Also can hang other things. Such as ladder, bike, garden tools, power tools, heavy extension cables, folding chairs, and other bulky objects
Question:	Where these garage hooks can be used
Answer:	You can use hooks in garages, homes, gardens, closets, storage rooms, warehouses, basements, gyms, or shops. Let your tools be organized the way you like, making it a much neater space and efficient.
Question:	How much weight can these garage hooks hold
Answer:	The garage hooks small J can hold 22 lbs-77 lbs, the large J can hold 22 lbs-55 lbs, the small square can hold 22 lbs-55 lbs, the medium square can hold 15 lbs-22 lbs and the large square can hold 11 lbs-22 lbs. And now this garage hook is the latest upgraded and can bear an additional 10 lbs of weight on the original load.

Product features

Heavy Duty Garage Storage System Hooks

Extra hook & increase security

Our garage hooks add an extra hook on the fixing plate to hold the twin arm hanging hooks steadily before welding, which increases 10 lbs of load bearing, compared to other direct-welded hooks in market. Be safer and never worry about your garage organizers falling off again

Easy to install

Plaster wall

1. Mark 2 holes on the wall

2. Tap in the white wide thread head and then screw in the thread screw

Wood/brick/concrete wall

1. Mark 2 holes on the wall and then drill

2. tap in the yellow expansion tube and then screw in the thread screw