12 best cycle racks

Product description

* Special anti-rust treatment with tough powder-coat finish

* Features patented Delta locking lever

* Ultra-rigid 9mm skewer

* 4” long, 1 ½” wide, 3 1/8” center from hole to hol

• Pre-aligned skewer positioning for easier bike entry/exit
• Quick-release lever
• Ultra-ridged 9 millimeter skewer for secure transport
• Anti-rust aluminum body
• Lifetime guarantee against defects

User questions & answers

Question:	What prevents someone from unscrewing the black "nut" on the opposite side of the axle from the locking lever? Then the axle would slide right out
Answer:	On their website, Zinus says about this (and all their mattress covers): "The cover is not meant to be removed and is not washable. Please follow the care instructions on your mattress label. We recommend using a mattress protector to keep your mattress like new."
Question:	mmX120 Fat tire bike, does it fit
Answer:	Memory Foam is definitely different, as an activity surface. Takes some getting used to. Waterbeds are worse, though. You might try using a slightly inflated air mattress, with strong baffles, on top of the bed to give a bit of springiness to you for those "special" times. That's the only thing that comes to mind, that "might" work, short of going back to an inner-spring mattress. You're right, though. It does take some of the fun out of it and I was only using a Two inch thick mattress topper of memory foam. A whole bed made of the stuff, I can't even inagine how it would complicate matters. I have bad knees and find it difficult on memory foam to crawl across the bed. Like you'd have to if you wanted to hang or change a picture above your bed. Hurts like the dickens! But for sleeping it's great stuff!!!
Question:	What would you attached it with on a Xterra track cargo system
Answer:	The layers are different. This mattress has1 inch microfiber quilted to soft knitted jacquard cover, 1 inch Viscolatex Responsive Foam, 2 inch memory foam, 3 inch comfort foam, & 5 inch high-density base support foamThe green tea 12" 3 inches Memory Foam, 2 inches Comfort Foam, 3.5 inches Airflow High-density Foam, 3.5 inches Airflow High-density Base Support Foam
Question:	Will these fits bikes with shocks and bikes with forks? what is the width fo the bracket
Answer:	I am looking at this years later after I bought it because this bed kills my back. Both my girlfriend and I are laying on this bed right now with backaches looking for another mattress. I started going to a chiropractor because of this bed its so soft I like sink into it. Im only 5'5" and about 155lbs.

Product description

Patent pending design specifically for use on bikes with disc brakes. Designed for use on bikes without threaded eyelets.

• A lightweight, low profile solution for mountain, commuting and fitness bikes
• Ultra-narrow profile improves aerodynamics, keeps load closer to center and greatly reduces bag "swing"
• Hand-welded 10.2mm tubular 6061 T6 alloy construction
• Fits 26" and 700C wheels
• Ample space for MTB and Hybrid/Trekking fenders

User questions & answers

Question:	Can anybody tell me the dimensions of the middle square
Answer:	If you have a platform bed you bo not need a box spring I did not have a platform bed so I had to get a box spring
Question:	Is there any flexing with that bottom mounting piece
Answer:	I sleep on my stomach all the time and I like this mattress. We've had it a year and had no problems whatsoever.
Question:	Will this rack fit my surly ecr
Answer:	I have slept on this mattress for 2 years. I weigh 200lbs and my wife weighs 130lbs. So far, we cannot see any indication of indentation. perfectly level across the bed. After reading all the answered questions with reported indentation, now I'm thinking did we get the only good one? In fairness, we did add a 2" memory foam topper to make the bed more plush. under that topper, the mattress is perfect 2yrs later.
Question:	Will the quick release and brake mount be safe/sturdy on a carbon fiber bike
Answer:	Yes. I’ve had this mattress for a little over two years and there are distinct indents from where my husband and I both lay.

Product description

The Real Wood Woody Bike Rack from Rad Sports combines the utility you need with the charm and quality of real wood. NOW WITH NEW PACKAGING!

FEATURES: The Woody Bike Rack is made of furniture grade solid wood hand selected for both its beauty and it's strength. The solid wood top plate uses protects the ceiling from damage, yet holds the Woody bike rack solidly in place. The solid wood base plate allows for a tight fit and stability on any surface to. Hook and loop straps are to secure the front wheel to the bike frame to keep the front wheel from swinging off center. The vinyl coated arms securely support the bikes while protecting the paint from damage. Each arm is adjusted independently up and down, allowing for an infinite number of configurations to match whatever style of bike you have. The Woody Bike Rack adjusts to accommodate ceiling heights from 7ft to 10 ft.

SPECIFICATIONS: The Woody Bike Rack has a storage capacity of up to 200 lbs. Weight: 14 lbs Assembled, it's dimensions are: 7-10'L x 14.5"W x 9.5"D.

• ►REAL WOOD - Made of furniture grade solid hardwood hand selected for both its beauty and it's strength. Stylish and functional
• ►NO WORRIES - Solid wood top plate uses protects the ceiling from damage, yet holds the Woody bike rack solidly in place.
• ►HEAVY DUTY - The Woody Bike Rack has a storage capacity of up to 200 lbs. and still looks like a decorative piece in your home or garage
• ►DIMENSIONS - Assembled dimensions are: 7-10'L x 14.5"W x 9.5"D. will span from floor to ceilings 7' to 10'
• ►EASY ON BIKES - Vinyl coated arms securely support the bikes while protecting the paint from damage.

User questions & answers

Question:	Are the bike hanging heights adjustable
Answer:	No.Could you mind tell us why you think this may require another wall mount.
Question:	Will this bike rack work on a ceiling that is vaulted, not flat
Answer:	Yes,screws and hardware are included.
Question:	how does this attach to the floor and ceiling
Answer:	No, The manufacturer does not specify use outdoors. This unit is steel and it will rust, I would not use it outdoors.
Question:	Is it easy to assemble? Do you need any outside tools
Answer:	It's about 9.6 inches high and 6.5 inches wide

Product features

RAD Cycle Woody Bike Stand Bicycle Rack Storage or Display Holds Two Bicycles

The Real Wood Woody Bike Rack from Rad Sports combines the utility you need with the charm and quality of real wood. Now With New Packaging.

The Woody Bike Rack has a storage capacity of up to 200 lbs. Weight: 14 lbs Assembled, it's dimensions are: 7-10'L x 14.5"W x 9.5"D.

Heavy Duty

The Woody Bike Rack has a storage capacity of up to 200 lbs. and still looks like a decorative piece in your home or garage.

No Worries

Solid wood top plate uses protects the ceiling from damage, yet holds the Woody bike rack solidly in place.

Real Wood

Made of furniture grade solid hardwood hand selected for both its beauty and it's strength. Stylish and functional.

Easy On Bikes

Vinyl coated arms securely support the bikes while protecting the paint from damage.

Rad Cycle Quality. Real Wood

The Woody Bike Rack is made of furniture grade solid wood hand selected for both its beauty and it's strength. The solid wood top plate uses protects the ceiling from damage, yet holds the Woody bike rack solidly in place. The solid wood base plate allows for a tight fit and stability on any surface to. Hook and loop straps are to secure the front wheel to the bike frame to keep the front wheel from swinging off center. The vinyl coated arms securely support the bikes while protecting the paint from damage. Each arm is adjusted independently up and down, allowing for an infinite number of configurations to match whatever style of bike you have. The Woody Bike Rack adjusts to accommodate ceiling heights from 7ft to 10 ft.

Product description

Steel 26" Bike Rear Rack Bicycle Carrier, 6 3/8in W x 19 1/2in L, Various Colors

• 19 1/2" Long
• 6 3/8" Wide

User questions & answers

Question:	Are the nuts/bolts/ screws included
Answer:	Nothing. It is somewhat tough to unscrew because your fork and the nut have ridges that catch each other. Look on your fork. But, it is feasible. I use a second lock if I leave the bike on the rack, but I leave it for minutes not hours.. What is stopping the person from just unscrewing the two bolts that hold the rack to your truck bed? Really the only time I lock the latch is with no bike in it so dumb kid doesn't steal the holder latch.
Question:	what screws does it need
Answer:	Yes it does
Question:	How much weight can it hold
Answer:	Two galvanized plate and bolds will take care of that.. It works for me
Question:	Will this fit with a fender
Answer:	I think that will work, I'm using with MTB and Route bike and fit well

• Rubber bike cradles and EPDM rubber straps hold up to 2 bikes firmly in place;
• Comes fully pre-assembled; Folds flat for easy storage in your trunk or garage
• Max Capacity: 35lbs per bike
• Kids bikes, ladies frame bikes and some mountain bikes may require a top tube adapter to fit on the rack
• Check vehicle Fitguide to ensure the rack will work for your vehicle

User questions & answers

Question:	How many pounds can the rack hold? I have two older steel bikes
Answer:	I have no idea what you mean by "middle square." The flat area on the top of the rack is about 11" long by 4" wide. That's a rectangle, not a square.
Question:	Do the carry arms fold down when the rack is mounted on your trunk
Answer:	There is a littke bit of flex to the bottom mounting braket. I had to draw the two sides together slowly with the screws that are provided the lower bracket is constructed of a thin, flat stock of metal.
Question:	With the rack installed and zero bikes mounted, can you still open and access the trunk of a sedan (Yes/No
Answer:	Yes
Question:	Where can I view a fit guide
Answer:	I used it for a couple of bike tours through Yellowstone on my Carbon fiber bike with no issues.. Though I would suggest getting a seat post mount instead of using the brake lug https://www.amazon.com/gp/product/B004B6M16U/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1.... My dropouts have a bit of a "shelf" around them but a couple of washers JB welded onto the rank tangs took care of that. Honestly it is a great rack but with anything like this some modifications may need to be made to fit to your application :)

Product description

Padded lower frame keeps bicycles away from vehicle. Patented sure strap lower strap keeps bottom hook in place during use. Comes fully assembled installs in seconds.

• Patented design fits sedans, hatchbacks, minivans, and SUV's consult manufacturer web site for specific vehicle fit information
• Side straps for increased lateral stability. Single configuration design eliminates setup hassles and headaches during installation
• Individual tie downs secure and protect bicycles
• Padded lower frame keeps bicycles away from vehicle
• Ships in certified frustration free packaging 70 pounds max capacity
• Comes fully assembled set up and installs in seconds 12 inch long carry arms easily accommodate a wide range of bicycle styles and 115 inch wide carry arms for greater bike compatibility
• Allen's warranty does not cover items purchased through third-party sellers
• Important, please consult manufacturer web page for specific vehicle fit

User questions & answers

Question:	So this is a weird question, but I'd like to take my bicycle with me on my commute. Can I lock my bicycle to the bike rack using a typical bike lock
Answer:	Some people are suggesting locking the bike to the car with a cable. It should be noted that ANY cable, even the thickest and most secure ones on the market, can be cut in seconds. A cable of any type is, at best, a deterrent to the casual thief. A serious thief loves cables because they are so easily cut. If you have an expensive bike, the only option worth considering is a U-bolt type of lock. Simply remove your bike from the car rack and lock it to a post. Even U-bolts can be defeated but the time and tools required will send all but the most determined thief looking for easier prey, like a bike with a cable.
Question:	I have 2000$ bike, is it worth the risk
Answer:	It was fine for my $1,500 RadRover. It's good up to 70 pounds. What does your bike weigh?
Question:	How well does this work on a 2010 honda crv
Answer:	allensportsusa.com/fit-listgo to the allen sports fit list and check to see what is recommended for 2010 honda crv. If it is on the list and instructions are followed when installing, there shouldn't be any problems.
Question:	Hi guys is it good for volvo suv xc90? does it easy for woman to put the bikes up herself
Answer:	This rack (or any strap mounted carrier) should not be used on the Volvo XC models. The issue is that the top of the rear door on the XC's is made of extremely brittle fiberglass that can crack if anything (i.e. metal hooks or bike rack straps) is placed in the seem at the top of the rear door. We would recommend installing a receiver hitch on your vehicle and using a hitch mounted carrier.

Product features

Safe, Versatile, and Easy to Use

The Allen Sports 102DN Deluxe Two Bike Carrier fits sedans, hatchbacks, minivans and SUV's (make sure to confirm specific vehicle fit above). Its patented design sets up quickly and will safely transport your bicycles around town or cross country. Two side straps deliver exceptional lateral stability on your vehicle. A patented tie-down system individually secures and protects your bicycles.

Patented individiual tie-down system

Allen's patented individual tie-down system secures and protects your bicycles. The tie-downs are fixed in position on the carry arm, but rotate so that the can engage a wide range of bicycle frame sizes and styles.

Patented design fits sedans, SUV's, hatchbacks, and minivans

The patented single configuration design fits a wide range of vehicles, and eliminates confusion during installation. The middle frame on the rack keeps bicycles away from your vehicle during transport. Please consult Allen Fit List for specific vehicle fit.

Side straps for lateral stability on vehicle

Two side straps (in addition to rugged top and bottom straps) deliver exceptional stability for the rack when on your vehicle. This ensures that you and your bikes reach your destination safely.

Narrow set carry arms for easy bike loading

The 102DN's carry arms will accommodate a wide range of bicycle frame styles and sizes. Most traditional adult size bicycles, as well as most women's and children's frames can be quickly installed onto the rack.

About Allen Sports

Dick Allen (pictured left in 1972) started Allen Sports in his garage in 1967. Since its founding, the company has been committed to producing the highest-quality, easiest-to-use bike racks and bicycle related products on the market. Dick, a onetime aerospace engineer, opened Allen Sports after building a prototype bike carrier in his Lincoln, Massachusetts shop in his free time. The first ever trunk-mounted bicycle carrier made of electrical conduit, metal strapping, and fire hose casings (for padding) was thoroughly tested on weekend excursions to Cape Cod. Shortly afterward, Allen took his design to market, and by 1971 had established a national presence for his product.

Today, the family owned company owns more than three dozen patents, operates four warehouses nationally, six factories abroad, and sells products in countries around the world including USA, Mexico, Canada, and China.

• Best fit around: compatible with the largest array of popular vehicles, including those with spoilers.
• VIP Treatment: premium bike hold downs that are easy to use and quick to load.
• Clean, Sleek Look: integrated strap management eliminates flapping straps. Built with 100% recyclable materials
• Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come.
• Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits.
• Fit type: Vehicle Specific
• Sport type: Cycling

User questions & answers

Question:	I have a new 2018 Ecosport, will it work
Answer:	It should because the bars are adjustable but you can check the Saris website to make sure it will fit.
Question:	Does it fit on Ford Fusion
Answer:	Yes it does. I drive a 2016 Ford Fusion SE, and it fits it perfectly.
Question:	Does it fit for a 2016 VW beetle
Answer:	Hello! Yes, I just checked on the Saris website and it does fit 2016 VW Beetles (I used to have a VW Passat...which is the vehicle I originally bought it for). Here is a link to the Vehicle Fit Guide: http://www.saris.com/catalog/racks#®ion=1&make=265&model=5895&year=24744&sort=2&filter-10=on&filter-2=on
Question:	straps
Answer:	There are numerous straps and all involve numerous adjustment to get this to fit your vehicle and even then it won't be a good fit. The product if very poorly designed and it is unsafe.

Product description

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack® compatible for use with any MTX TrunkBag, rear basket and pannier bag.

The Super Tourist is a classic loaded touring rack for road bikes designed for compatibility with disc brakes. 6061-T6 aluminum construction with 6061-T6 aluminum bracket, hollow aluminum tubes, and stainless steel hardware makes it strong and lightweight while the integrated top fender offers splash protection. The QuickTrack mounting system is compatible with Topeak MTX trunk bags and MTX rear baskets and the rack fits all frames with disc brakes. Includes all mounting hardware.

Topeak's QuickTrack system makes mounting any QuickTrack equipped bag or basket to a Topeak rear rack incredibly easy. Simply line up the composite QuickTrack base with the channels on any Topeak rear rack and slide forward until it clicks into place--there are no tools, no straps, and no hassles. To remove, simply push the yellow release button and slide the bag or basket rearward until completely disengaged.

Features:

• Fits all frames with disc brakes
• Braze-on type attachments
• RX QuickTrack system compatible
• Includes all mounting hardware
• Precision welding at all critical support points
• Solid fender top
• RedLite mount
• Tail light mount
• Made of strong and lightweight hollow 6061 T-6 aluminum

Specifications:

• Weight Capacity: 55 pounds
• Size 13.4 by 9.3 by 16.1 inches (L x W x H)
• Weight: 1.63 pounds

• Fits all road frames with disc brakes
• Braze-on type attachments; weight capacity of 55 pounds
• RX QuickTrack system compatible
• Precision welding at all critical support points
• Made of strong and lightweight hollow 6061 T-6 aluminum

User questions & answers

Question:	Will this rack fit a 2018 Giant Roam 3 disc (large frame
Answer:	I use the case for my Yamaha axp-a4 with a little length space left. The case has a max depth of 4.5" and a max body width of 15" and a max body length of 19.75". The max neck width is 4" and a max head width of 5" and an overall length of 42".
Question:	How to use rear light clip plastic mount when plastic Topeak pieces don't have screw threads
Answer:	This case is designed for a thin body guitar. Body must be less than 4 inches thick.
Question:	Will this fit a bpm f
Answer:	Hello, Well the way I figured it out for my Yamaha Dreadknot was carefully measure the guitar and read the instructions on the case. Maybe you'll get lucky the first time. Sorry I can't give you more info on fit. Play on and enjoy !
Question:	Will the lower bar of the rack accommodate/fit panniers with Rixen & Kaul lock system
Answer:	I believe it will. The description says it fits all models CG

Product features

Topeak Super Tourist Tubular Bicycle Rack DX with Side Bar for Disc Brake Bikes

Fits 26", 27.5"(650B) & 700C Wheels w/ Disc Brakes

Our toughest tubular aluminum rear rack designed for heavy-duty, long distance touring. Specifically developed for bikes equipped with disc brakes. Integrated side bar provides a lower pannier attachment point-allowing more space for cargo on the rack top. QuickTrack compatible for use with any MTX TrunkBag, rear basket and pannier bag.

Product description

Axiom Rear Mount Racks. Features: Fits road bikes with fenders Sets rack 4cm behind axle for improved heel clearence Does not require braze-ons or threaded dropouts for installation

• Rack is mounted 4cm behind the axle allowing for improved wheel clearance on bicycles with shorter chain stays
• Specially designed hardware attaches to caliper brake mount
• Hand-welded 10.2mm tubular 6061 T6 alloy construction
• Ultra-narrow profile improves aerodynamics and keeps load closer to center
• Fits 700C wheels, ample space for road fenders

User questions & answers

Question:	What is this item's "true" weight capacity? The Axiom website says 110lbs, but a lot of reviews say less than 20 lbs? http://www.axiomgear.com/product
Answer:	No
Question:	I like the idea of reinforcing the strength of the rack by attaching it to the seat post. Can someone share what materials they used
Answer:	None. You use the existing screws from the bike.
Question:	My road bike doesn't have skewers or eyelets, just standard 10mm axle nuts. Will this mount to my bike
Answer:	Don't know exactly how much weight it Hose.
Question:	Does this rack come with hardware to mount to the seatstays
Answer:	Yes

Product description

Delta Cycle Corp HDRS6002 MICHELANGELO 2 BIKE RACK RUGGED This is a high quality part manufactured by Delta Cycle Corp.

• Durable and made with high quality material
• Lightweight material for easy handling
• Lifetime warranty against defects

User questions & answers

Question:	what is the difference between the Rugged and Standard version of this bike rack
Answer:	This bike stand does not need to be attached to the wall. It just needs to be centered on its base with the bike or bikes properly loaded. I cannot see the picture of your husband's electric bike, but as long as you do not load a bike or multiple bikes that, together, exceed 100 pounds, it should work fine.
Question:	Can I buy hooks or install accesories to hold my helmets on the side? It would be a nice addition to keep a lot of my stuff in one place
Answer:	The arms are fairly snug. there isn't a lot of play in them. The top and bottom pieces do have some (very little) play but this can be dealt with by securing it to the wall where it will be. I had two bikes (a townie and schwinn) that both had some weight to them unsecured in the garage and never had an issue, but if movement is a concern securing it to the wall will solve that issue.
Question:	Does this work well on a carpeted floor
Answer:	Here is the link to the Owners manual with instructions on how to adjust the arms to mount different types of bikes. http://dtxinternational.com/images/manuals/RAD/1107_Gravity_Bike_Stand_Manual.pdf
Question:	How tall is this product? The product info listed cant be correct. Thanks
Answer:	I think it is either a paint or a very thin vinyl coat. I did spray the inside of the hooks with black Plastidip to protect the finish on my bikes. They sell the Plastidip spray cans for around $3-4 at most stores that sell spray paint.

Product description

This pro-quality, versatile bike rack has a rock-solid base and is built to withstand years of use.When deciding on which product to carry we analyze many factors including: cost, stability, quality, etc.The RAD Cycle Product's exclusive design allows a secure base for awkward cycles and offers extreme portability--it can be assemble two different ways depending on the configuration you require.In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market and we back it up with a limited warranty. The Stand is simple to use and was designed with children in mind.It utilizes tubular steel construction with a durable finish that will give you many years of dependable service.

FEATURES:

• Easy to Install
• Floor Bike Stand
• Quickly Store 2 Bikes With Ease
• Bikes Can Be Stored In The Same Or Alternate Directions
• Easy For Children To Use
• Heavy Duty Tubular Steel Construction
• Durable Finish
• Weight 10 lbs.
• 1-year warranty

• ►HEAVY DUTY - Tubular steel construction makes this two bike rack one of the sturdiest bike racks on the market
• ►EASE OF USE - Quickly store 2 bikes with ease. No clamps, no brackets, no lifing. Just roll the bike into the rack and walk away
• ►VERSATILE - Bikes Can Be Stored In The Same Or Alternate Directions
• ►SIMPLICITY - So simple even children can use it without assistance. It doesn't get any easier than this.
• ►DURABLE FINISH - The gloss black powdercoated finish will protect your rack from the elements for years.

User questions & answers

Question:	Rad Cycle Mighty Rack Two Bike Floor Stand - what are the dimensions and weight please
Answer:	I measure 23" high x 24" wide x 21 inches deep. I can't really measure the weight. It pretty much stays put but it's not difficult to move.
Question:	can I use this in my suv trunk to keep the bikes uprights without falling during driving
Answer:	Definitely NOT. I transport 5 large cruiser style bicycles at a time inside my extended length minivan. 5 bikes fit inside, by alternating the handlebars forward-backwards-forward-backwards-forwards. This is only safe because the bikes are all tangled up with each other. Unless your rack INSIDE your vehicle has a secure locking clamp system (to keep the bikes from rolling back and forth when you hit the gas and brakes, or from falling over whenever you drive around a curve)...just like a good bike rack on the OUTSIDE of your vehicle should have, and unless the bike racks are bolted down to the floor of the vehicle, then you might as well forget trying to use any bike "stand" as a bike "rack" inside a moving vehicle.
Question:	can this stand be used outside
Answer:	I use mine on my travel trailer. It has been outside for a year. There are the startings of rust at some of the bolt connections. I suspect that after a few years in the FL weather I will be buying a new rack...which I am good with.
Question:	Will this fit my 29 inch mtn bike with disc brakes and 2 1/4 in. thick tires
Answer:	Not sure, I ride a canondale and my husband has a Trek hybrid. Ours fit facing opposite directions. The rack space is 2 3/4 inches for the tires. I do not know how the disc brakes would impact the fit. This rack is not the highest quality but was better then leaning our bikes against a wall.

Product features

RAD Cycle Products Mighty Rack Two Bike Floor Stand Bicycle Instant Park

This pro-quality, versatile bike rack has a rock-solid base and is built to withstand years of use.When deciding on which product to carry we analyze many factors including: cost, stability, quality, etc.The RAD Cycle Product's exclusive design allows a secure base for awkward cycles and offers extreme portability--it can be assemble two different ways depending on the configuration you require.In our opinion these are much more robust and versatile than the inferior knock off versions you regularly see on the market.

• Original Design: Leans against wall & holds bike using gravity
• Versatile: Elegant design looks good in any room or garage
• Construction: Industrial-grade powdercoated steel & custom molded arm covers
• Dimensions: 86" x 23.5" x 13.75" / 2184 x 597 x 350 mm
• Fully Adjustable: Independent arms accommodate any bike style
• Quick Assembly: Easy to assemble with regular screwdriver
• Max Weight: 100 lb / 45 kg

User questions & answers

Question:	How far does the stand come from the wall
Answer:	Not far. The top bar has a flat hunk of plastic (an inch or so thick) that must make direct contact with the wall. The legs curve forward a bit, and they probably sit about a foot from the wall, I reckon.
Question:	Will this work on carpet as well
Answer:	I have mine on carpet and it works great.
Question:	We have a shed with an inside side height of 72". Any way this will fit
Answer:	Cut a hole in the roof of your shed.
Question:	Will this work with two bikes with women's frames? The photo shows men's frames - which have the straight bar across instead of the angle
Answer:	Might help to get a horizontal adapter bar for women’s frames. They are used for trailer hitch bike racks. Typically run about $10-$20.

Product features

delta Cycle & Home

STEP 1

Installs in minutes. No drilling required. Our ground-breaking design leans securely against any wall with no permanent attachment.

STEP 2

Our rubber coated protective arms can infinitely adjust vertically and horizontally to fit any bike, including kids and womens bikes.

STEP 3

Once adjusted, storing and removing your bike is a breeze. Elegantly designed to suit homes, apartments, condos or your garage.