14 best bike mount for garage

• HEAVY-DUTY BIKE RACK: Solid metal holds 5 bicycles, up to 200 lbs! Ultra-durable powder coating, built to last a lifetime!
• ADJUSTABLE HANGING HOOKS: Universal cycling rack fits road bikes, mountain bikes, hybrid bikes, commuter bikes, kids bikes, and beach cruisers!
• VERTICAL INDOOR STAND: Clear up floor space in your garage, home, apartment, or bike shop. Easy to access for repairs or bike rides!
• EASY INSTALLATION: Mounting hardware included. Independent wall brackets fit any stud spacing.
• EXCLUSIVE PATENT PENDING DESIGN: Built to hold all your bikes and built to last! Designed in the USA!

User questions & answers

Question:	Do the bikes sway from side to side
Answer:	Hello, it seems that it could due to the areas where there are open sections or holes for adjusting the stand which could allow water to seep inside and rust. It does have a good, thick coating on the outside, but again, it has some areas where water could access. You may be able to maybe use electrical tape to cover those areas once the stand is adjusted for you, just a suggestion. Hope that helps
Question:	If I leave bikes on the rack for a long time, will the wheels get damaged or warped from the weight of the bike pulling on the rim
Answer:	I think these stands maybe secured using standard plumbing hardware.
Question:	Can the wall mount locations adjust to land on the wall studs
Answer:	The one that I purchased over a year ago just holds one bike and it didn't have an adapter. So you will probably need to by adapters.
Question:	What is the recommended height to install the Rack
Answer:	Up and down only sliding the U section like a trombone -- enough to go from 20" to 29".

Product features

Adjustable, Universal System

Wall mounting bar features (45) mounting points to space each hook to fit your bicycles. Holds road bikes, mountain bikes, hybrid bikes, touring bikes, bmx bikes, kids bikes, and beach cruisers!

Protective Hanging Hooks

Bike Storage Hooks gently hang your bikes by the front or rear wheel. Rubber coating prevents scratches and securely holds bikes on the wall for vertical storage. Keep your bikes in great shape!

Space-Efficient Vertical Storage

Holds up to 5 bikes vertically against the wall for compact, space-efficient storage. Great for clearing up floor space in your home, garage, or anywhere you need to organize your bikes!

Easy Installation

Mounting hardware and instructions included. independent wall mounting brackets adjust to fit your wall's stud spacing. Mount this bike rack on the wall in minutes!

About StoreYourBoard

• The most trusted name in the industry for organizing your outdoor adventure gear!
• Headquartered in Charlottesville, VA
• Since 2009, we have designed and developed innovative solutions to store your bikes, kayaks, paddleboards, surfboards, skis, snowboards, wakeboards, skateboards, canoes, fishing rods, tools, and more!
• Our mission is to optimize your storage space while protecting your gear from excess wear and tear. From our first Scorpion Wall Rack designed in our founder's basement, we have now grown to become the most trusted name for outdoor adventurers around the world!
• Free up space in your home, garage, or retail shop and have your gear ready to go for your next adventure!

• The wall hanger's angle (45°) can adjust to keep your bike level. Correct height for hanger tyres should sit atleast 4 inch off floor or ground. Bracket must be mounted 2 hole side up
• Designed as a horizontal mounting wall hanger for a single bike to save floor space. Weight limit- 39.6 pounds
• The sturdy and durable construction made out of aluminum makes this hanger safe for bikes to hang on the wall
• The double arm hanger has padded ABS arms to keep the bike secure and protects against paint damage
• Suitable for most conventional bike frames. Hanger beam length is adjustable to fit narrow or wide handlebars
• Mount hanger on masonry or concrete wall with anchors. Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help.
• 100% Satisfaction Guarantee - Backed by Ibera 30 days Money Back Guarantee with limited lifetime product warranty. Helmets or other bike gear can be hung from hanger beam

User questions & answers

Question:	What is the range of adjustable distance from the wall to the supports
Answer:	Worked fine for me. Just hung it out where the carpenter bees like to be and they started to enter the holes and dying in the jars. Empty the jar so new ones can enter. Best to hang each year BEFORE the bees start making holes in your other woodwork. Once they establish a home elsewhere, they don't necessary have a desire to make a new one.
Question:	Can I mount on drywall
Answer:	I can't get this stuff to work on any bees or wasps.
Question:	What is the maximum top tube width that the hanger will accommodate
Answer:	I have recently used this for the first time. I have two traps but unfortunately the bees seem to gravitate toward their original drilling locations. The traps have only collected a couple of bees (I did use the lure).
Question:	What is the minimum and maximum range on distance from wall
Answer:	Very hard to predict. I would give a particular trap and location a couple weeks before trying a different location. I've noticed that even with the Donaldson lure applied it may take a few days with the bees not showing interest, but once yoy finally get one there are almost always others that will follow, so don't kill any live bees in the trap, as they will attract others. At a certain point dead bees in the traps don't seem to attract more bees so you should rinse it out. I've seen bees boring holes as low as 2 inches off the ground and as high as the eaves of my covered deck that is 20 feet off th ground, but always in an area that is protected from rain-- usually the bottom edge of boards or the backside that faces inward. Be sure to hang traps securely rather than freely swinging, and as close to an area that they like to bore in, like the aforementioned bottom edge of boards.

Product features

Ibera Bicycle Horizontal Wall Hanger

Ibera Bicycle wall hanger is designed as a horizontal mounting wall hanger for a single bike to save floor space!

Aluminum body with foam-padded ABS frame holders. Easy installation with mounting hardware included. Adjustable hanger's angle to 45 degrees.

This bicycle wall hanger is the perfect solution to create an organized space for your bike!

Keep Your Bike Level

Frame holders are position-adjustable to keep wheels horizontal. Frame holder arms can be adjusted to be wider or narrower, and to raise or to lower either end of bikes. It is adjustable to fit most bikes with smaller frames or with non-standard frames.

Ibera Horizontal Bike Wall Hanger is designed to fit almost all bikes with different frame sizes!

Easy Installtion

Mount hanger on masonry or concrete wall with anchors.

Do not mount hanger on plasterboard wall or dry wall unless there is a wood stud behind. If you have any questions about the installation, seek for professional help.

Length Adjustable Beam

- The length of hanger beam is adjustable up to 12 inches. The distance from the wall to frame holders is up to 14.8 inches.

- It is designed to fit almost all bikes, including most road bikes and most mountain bikes, with different handlebar size.

Wheel Anchor Strap Holds Your Wheel in Place

Attached wheel anchor strap can further secure front wheel, preventing front wheel from side swinging.

Non-Scratch Frame Holders

Foam-padded ABS frame holders can safely store your bike without paint damage.

• LARGE CAPACITY:Garage wall mount bike rack garage could accommodate 6 bicycles and hold up to 300 lbs
• CUSTOMIZE BIKE STORAGE: Space attachments to 48" long steel rail to customize spacing to fit your needs
• SAFETY:The sturdy safety hook design could ensure that your bike wall mount stable and will not release accidentally,perfect choice for your garage storage.
• EASY TO INSTALL—The bike storage rack is easy to attach and move around on the rail with 5mm drill. Heavy duty mounting hardware (16*Screw, 16*Expansion tube). Hardware with the kit for wood stud ,drywall,create or brick wall.(Bikes not included)
• SUPER MATERIAL FOR DURABILITY—Powder-coated steel for durability-resists of rusting, chipping and cracking. Rubber-coated sleeves are scratch-resistant. Steel construction epoxy finish.

User questions & answers

Question:	Would the bicycle stain the wall
Answer:	Hello, it doesn't come with CBD oil, one packeg only includes 3 lava bracelets. Thanks.
Question:	Can you mount this on rafters away from a wall
Answer:	No. The bee just stays in there and dies slowly. It takes days unless its really hot outside. The bee in there suffering is what actually attracks more bees to go in the trap. Before you know it , the trap is full.
Question:	Will 29" tires fit on this
Answer:	It it made out of Pine and is not pressure treated
Question:	Could you please tell me how to install this bike storage rack
Answer:	RE46.421 is the patent number. Please look it up. Thank you.

Product features

Suitable for varieties of bikes

Ultrawall garage wall mount bike rack garage could accommodate 6 bicycles. The wall bike rack can fit a variety of bikes such as: road, , beach, kids, and other garage bike rack wall mount along with some of your gear!

Step 1

make out a horizontal line using a spirit level at your desired height on the wall

Step 2

ensure you have the rail the correct way up.Place the bottom of the rail along the maked line

Step 3

Punch the wall

Step 4

Fasten the rail hooks into place.Please note:the fasteners supplied are intended for use in brick walls only,when fastening to timber of plasterboard.

Removable

The space between each hook is adjustable, you could move around the hooks in 48” steel rail to fit your bike storage rack when you need.

Small volume, hold up to 300lbs

bike racks for garage with smaller volume compared with others,but this bike storage garage could holds up to 300lbs in total, and each hook could hold about 50lbs

Super material

The Ultrawall Bike storage rack are made of super industrial steel for durability,which allows bicycles long term storage.and the steel construction with the epoxy finish,this bicycle storage is waterproof.

• ✓【Save Space & Simply installed】- No assembly required.The fixed hook lets you hang and detach the bike in a second.Space saving,great for shed corner and garage storage .
• ✓【Heavy Duty & Safety】 – Wall bike rack features hook with rubber coating to protect your bicycle from scratches, and safety locking mechanism prevents accidental release.
• ✓【Rubber Cover & Prevent Scratches】- The arm of the wall mount bicycle hanger has assembling soft rubber to protect against bike paint damage.The sturdy and durable construction is designed to protect you bike better by holding the bike frame instead of bike rim.
• ✓【Vertical Bike Rack 】– The ideal way to store your bicycle is vertically – and easily rack and retrieve bike when you’re ready for a ride.
• ✓【Lifetime Warranty】– We stand behind our product and provide lifetime warranty.If you do not like it just return and we will full refund for you.no question ask.

User questions & answers

Question:	What size drill bit do you use to put in the anchors
Answer:	10 in - 14 in
Question:	It’s a double set ? Or just one
Answer:	Hello, the lava bead bracelet is made of raw stone. Thanks.
Question:	For installing this with the provided expansion screws, do we have to mount it on stud or just the drywall
Answer:	They do adjust if you pull on either side of the area where there are no beads. This is why I got these bracelets instead of an elastic one which will just break eventually. HOWEVER once I adjusted this to get on and off my wrist I just leave it. I didn't feel like the thread was sturdy enough to tighten and loosen it repeatedly as I had hoped I would be able to do.
Question:	Are the screws included
Answer:	Hello, you can put the oils on it according to your preferences. Thanks.

• SPACE SAVING:Bike rack is designed to hang the bike on wall to save space and out of the way.Please mount on stud or cement wall.
• FOLDABLE DESIGN:Bike hanger is easy to fold up when not in use,save a ton of space in garage.
• ANTI SCRATCH COVER:The arm hanger has padded soft rubber to protects against paint damage.
• STURDY:Bike rack weights 3 lbs and WEIGHT LIMIT:38 pounds.Large arm holder fits mountain bikes,road bikes,children bikes etc.NOT for woman's bike
• PERFCT SOLUTION:Wall mount bike racks are used to store and elegantly display your bike like works of art hanging in any room.

User questions & answers

Question:	Would this work with a recumbent bike
Answer:	No likely since the maximum hanging weight is 60 lbs....
Question:	Will this work for a step through cruiser model bike
Answer:	I dont think so, step thru's usually do not have top cross bar, to place across the red portion off wall mount. Ask co. Directly
Question:	Can I lock my bike to this rack outside
Answer:	Even with extra strength screws, if someone really wants to steal your bike they can just ripped the rack off the wall.
Question:	What's the distance between the two holes
Answer:	The vertical bracket has a distance of about 7" between both mounting holes

Product features

Dirza Horizontal Wall Mount Bike Hanger

If you have limited space and want your bike does not take up space, and garage looks neat.

Our wall mount bike rack is your best choice!

It is perfect solution to create an organized space!

Flip up When not In Use

The bike hanger rack keeps your bike level and away from the ground. When not in use, you can flip it up so that it doesn't block the way

Great for Mountain Bike,Road Bike

Our bike hanger has a large hook that firmly supports your bike.Great for mountain bike,road,etc.NOT for woman's bikes.Weight limit:38 pounds.

Easy to Install

The hanger is super easy to install.It needs mount on stud or cement wall,do NOT mount on drywall.The hook is covered with soft rubber.So don't worry it will scratch your expensive bike paint.

Product description

When parking your bike at the end of the season or simply done riding for the day, store your bike effortlessly with the Bike Rack from Stalwart. This sturdy and practical bike hanger truly optimizes your space. Made of solid durable steel with soft EVA foam-coated hooks, Stalwart Bike Wall Mount ensures your bike frame stays safe and secure! NOTE: Maximum weight this device can hold is 50 pounds. To avoid potential damage to your property and avoid personal injury, this hanging device MUST be mounted directly into a wood stud to utilize even the minimum weight capacity it offers. Mounting screws are included. IMPORTANT: Avoid buying counterfeit products and transacting with unauthorized sellers. Look for our logo on the packaging for every one of our products. Stalwart is committed to providing the consumer with the absolute best price and value on our entire line of products, which we ensure by applying a rigorous Quality Control process. Stalwart is a registered trademark protected by U.S. Trademark law and will be vigorously defended.

• STORE YOUR BIKE WITH EASE – When parking your bike at the end of the season or simply done riding for the day, store your bike effortlessly with the Bike Rack from Stalwart. This sturdy and practical bike hanger truly optimizes your space. You can also conveniently fold the bracket up so that it is parallel to the wall and out of your way when not storing a bike on it!
• COMPACT, LIGHTWEIGHT DESIGN – Made of solid durable steel with soft EVA foam-coated hooks, Stalwart Bike Wall Mount ensures your bike frame stays safe, secure, and prevents sliding. Suitable for all types of bikes from Mountain bikes, Road bikes, Folding bikes etc.
• EASY TO INSTALL – Attach the bicycle mount to a wall stud in your garage wall, at work, or in your house and keep your bike handy and ready to ride. All hardware is included to properly secure your mount and bike to almost any wall.
• PRODUCT DETAILS – Dimensions: 13.25 inches (L) x 11.5 inches (W) x 4 inches (H), Weight Capacity of Wall Mount: 50 lbs., Includes 2 Inch Wall Mounting Screws (2 count)
• SATISFACTION GUARANTEED – Stalwart is committed to providing consumers with the absolute best price and value on our entire line of products. NOTE: This is an exclusive product of Stalwart and ONLY Bike Rack Wall Hooks by Stalwart are GUARANTEED to be genuine

User questions & answers

Question:	what is the difference between Reg and heavy duty
Answer:	1.prepare the tools : stud finder，pencil, level, power drill.open the package, take out the product accessories.     2.find stud center by stud finder and fix the installation location by level, and make the mark of the holes with a pencil. 3.use power drill to predrill the holes on the wall, then put the rail on the wall and tighten the screws. 4. snap the hooks on one by one and hang your tools . each hook can bear about 50lbs. Which is a perfect solution for organizing all your bike storage rack.
Question:	Can this be mounted outdoors on a masonry wall? It would be under the roof overhang so it's got about 5' of cover in our back patio
Answer:	It is about 9,84 inches
Question:	How far will this stick out
Answer:	I hope I'm not adding to the confusion here. Yes, there are drywall studs rated for higher weights, but that's based on a more-or-less straight downward force. With an arm like this, the force will be into the wall at the bottom screw and pulling out from the wall at the top. That creates a twisting force which drywall doesn't withstand very well. Yes, you might get away with drywall only with a light bike, but I'd suggest finding a stud as many of the other answers suggest. The unasked question: how do I find the stud? Some people have success hitting the wall and picking a solid spot; others use a stud finder tool. A cheap and dirty way is to make a guess and then drive in a thin nail an inch or so. If you hit wood, you've got a stud. If the nail gets through the 1/2" or so of drywall and then hits nothing, keep trying. Studs run up and down, are 1.5" wide and normally are 16" apart. Use these facts to guide your strategy.
Question:	Is the item good for women's bike
Answer:	I'd say about 2" to 2.5" diameter max.

Product description

Get a two pack of the top rated / best selling bicycle hoist on the market! There is no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike - 100 lb. load limit. Please note, you can mount this item as pictured or on a 2 x 4 and then onto the ceiling. RAD Cycle Products is an industry leader and backs it up with a warranty which is the best in the business!

BEWARE OF THE CHEAP IMITATIONS WHICH USE THINNER ROPES THAT FRAY! THESE ARE THE TOP SELLING "RAD CYCLE" LIFTS!

FEATURES:

• Hooks are designed with a rubber coating to protect your bicycle from scratches.
• Robust engineering allows you to lift heavy bikes--100 lb capacity.
• For Ceilings up to 12ft.
• Safe locking mechanism prevents accidental release.
• Raise your bike to the ceiling with ease.
• RAD Cycles exclusive rope is thicker and won't fray.
• Two hoists are included.
• WE OFFER A LIFETIME WARRANTY (100% UNCONDITIONAL GUARANTEE!)

• ►RUBBER COATED HOOKS - Hooks are designed with a protective rubber coating to protect your bike from scratches.
• ►EASY TO INSTALL - Mount to your ceiling joist or rafter and so easy to use. With only the minimum of tools you can have your kayak hanging in your garage in no time.
• ►ROBUST ENGINEERING - Allows you to lift heavy products, up to 100lb. Capacity. This is the bicycle hoist that all the other are trying to copy. We don't cut corners. This is the original RAD Bike hoist you've heard about.
• ►INDOOR USE - For indoor ceilings up to 12 ft. high. Once the bike is out of the way you free up so much floor space you won't know what to do with it all.
• ►SAFETY LOCKS - Safe locking mechanism prevents accidental release. No one wants to come home and find their bike has fallen to the floor.

User questions & answers

Question:	Are the pulley wheels plastic or metal
Answer:	When you don't need this clip, push the plastic mop holder from the down to up in order not to make it broken. Then follow below steps to tear off the adhesive surface, 1. Do not directly pull the adhesive surface to remove. 2. Gently tear off the adhesive surface edge from the wall slowly. 3. Long time not in use, please use a protective film to paste the surface so that it can be used next time. 4. Do not stick to wallpaper wall or painted or plaster or cement surface. So that you can't remove the holder from these surface.
Question:	Has anyone ever used these for Kayak hoists? We have 2 Kayaks and these look like they would work fine
Answer:	Hi friend, if the surface is smooth of your truck, it will work great.
Question:	How easy is it to pull the rope / lift an average bike? Would a typical 12 year old be able to lift his mountain bike? What about a 9 year old boy
Answer:	the smallest diameter of a handle that this can hold is 0.85in, if your handle is smaller than this size, it dosen't matter, because the handle hook or cap or handle cover can prevent the handle from sliding right out from the bottom.
Question:	This says, "two pack." does this mean there is two hoist systems to hang 2 bikes
Answer:	Hi friend, Yes it can hold a garden shovel. Heavy Duty-max bearing 11lbs(5kg)weight per holder. Hope these answers can help you.

Product features

2-Pack RAD Cycle Products Bike Lift Bicycle Hoist 100LB Capacity

Get a two pack of the top rated / best selling bicycle hoist on the market! There is no such thing as not enough room for another bike. Store your bikes overhead and out of the way. Smooth pulleys and latches make lifting even heavy bikes super easy. The exclusive rope locking mechanism prevents unwanted release and can suspend one bike - 100 lb. load limit. Please note, you can mount this item as pictured or on a 2 x 4 and then onto the ceiling. RAD Cycle Products is an industry leader and backs it up with a warranty which is the best in the business!

• 【BIKE ADHESIVE WALL CLIPS】–Bicycle parking buckle is designed as a horizontal/vertical stationary bike stand wall mount for a single bike to save floor space. The sturdy and durable construction hitch bike rack made out of high quality steel makes this bike frame safe for bikes to hang on the wall.With this portable bike rack, you never have to look for a bike rack garage or bike shed you can park anytime, anywhere
• 【TIRE RACK】– The C-clamp component is made of high-quality steel,width up to 1.95".The bike wall mount is strong and sturdy ，serves as the bike hooks for mountain bikes(mtb stand) The opening distance and clamping force can be fine-tuned manually according to the rim/tire. The contact part with the tire is made of anti-collision rubber the bike frame will better protect the tires
• 【CHRISTMAS GIFTS】Bike stand for indoor riding comes with instruction and by improving the design with 2 rollers, the bike wall mount is easier to install and keep your bike horizontal or vertical.portable garage storage system can be mounted to any concrete wall. Avoid dry or chipped walls for mounting purpose
• 【PORTABLE BICYCLE PARKING BUCKLE】Bike carrier hitch mount small and easy to carry. The bicycle rack weighs only62g. The garage bike rack is suitable for road bikes and mountain wheel sets under 1,95 (including 1.95).Hitch rack two installation methods, no punching installation and punching installation, even when traveling easy to use.More convenient than bike rack hitch bike hooks for garage.The best choice for Christmas gifts
• 【QUALITY SERVICE TENET】If you encounter any problems with the bike clips, please contact us in time. We promise to return and exchange free of charge within 30 days and provide quality after-sales service，the wall bike rack provide you with a better life experience

User questions & answers

Question:	What size tire width is this good for
Answer:	yes
Question:	Is it easy to install
Answer:	You could put a piece of cellophane on the wall to avoid the stain.
Question:	The description says only for wheels up to 1.95. Have any of the buyers been able to increase the width to accommodate a 3.0 boost mt bike width
Answer:	yes, as long as your tires will fit between the rafters.
Question:	Can it be mounted on an inclined wall
Answer:	Yes it will

Product features

High viscosity double-sided tape

With the high-viscosity 3M double-sided tape, Transparent polymer material, strong and tough! the parking frame can be easily adhered to the wall firmly.

Carbon fiber backplane

Lighter and more powerful, the high-definition lines on the surface show the taste of men. The smiling face design hopes you will be more happy. Smile is my attitude to life.

Well-designed C clip part

The C-clamp is made of spring steel, which is more durable than plastic. The part in contact with the rim is made of anti-collision silica gel, which does not damage the rim. It is truly considered for riders.

CNC finishing parts

Well-designed and built with heart! Inherit the craftsman spirit! We have higher requirements for quality!

Share a little story

Even if it is a small retaining wall sticker, we spent three months comparing different materials to select the best quality and most durable retaining wall sticker! Seriousness is our attitude in doing things!

Small and portable

VARWANEO portable parking buckle weighs about one egg, does not occupy space and weight

Punch-free installation STEP 1

According to the tire size, manually adjust the C clamp

Punch-free installation STEP 2

Stand the front and rear wheels of the bicycle on the wall and mark positions A and B

Punch-free installation STEP 3

Wipe clean the back panel of the parking rack, and pay attention to the wall of position AB that there should be no dust or oil stains, which will affect the stickiness

Punch-free installation STEP 4

Stick the double-sided tape on the back panel and stick it to the wall position A. The double-sided tape should be pressed tightly to the wall. After installation, it is best to let it stand for 48 hours to make the wall and the back panel adhere better. Fast and can be used normally afterwards

Multiple fixing methods

There are two modes of fixed rear wheels and fixed double wheels. Stick the retaining wall sticker on the wall position B. When using, put the rear wheel on the retaining wall sticker first, and then fix the front wheel on the parking frame. Note that for vertical parking, the rear wheels must land

Product description

This wall bike mount hanger (4 Pcs) is a perfect solution in a space saving way for bicycle shop and home to storage the bikes in a vertical position.

Solid steel construction bears the heavy weight of your bike without deformation with its excellent ruggedness.



Features:

Heavy duty steel construction

Rubber coating ensures no scratching

Hanging the wheel of the bike vertically

Sufficient strength to withstand weight up to 66.14lbs

Most-desirable bike storage and display stand in home garage or bike shop



Specification:

Material: Steel

Overall Dimension: 10.24"x2.76"

Max Capacity: 66.14lbs



Note: Must be mounted on solid wall cement/brick wall, NOT drywall

Package Includes:

4 x Wall Mount Bike Hangers

16 x Screws

16 x Screw Anchors

• These 4 Bicycle wall mount hangers are convenience for hanging the bike vertically to save space.
• Made of strong solid steel, light-weight and durable. Can handle up to 66lbs of a bike.
• The rubber coated hooks protect your bicycle from scratches
• Accommodates tires width with 2.17" or less. Suitable for mountain bikes, road bikes, folding bikes, kid bikes etc.
• 100% Satisfaction Guarantee: Return to us if not satisfied or any issues.

User questions & answers

Question:	Do the hooks move/swivel up and down
Answer:	Yes, in fact we found it was the only way we could easily take off and mount the bikes, as otherwise the hooks tend to slide along the rack
Question:	Guys, what hole size do we drill into the wall to accommodate your 'expansion bolts
Answer:	This works excellent . Make sure and mount it to studs in your wall.I have had one for a year now and have no issues at all. It keeps all our bikes neatly hanging in the garage.
Question:	Could a kid put their bike away by themselves if you mounted low enough? Looking for something my 5 and 7 year old could use by themselves
Answer:	The bike's top wheel extends a couple of inches above the bar, so the height really depends on how long your bike is and if you want some space below the bikes. I hung it at about 7', so I have some space below. As to the spokes, I didn't notice any damage on the spokes so far, but the rubber coating on a couple hooks has been torn, so I had create a DIY padding.
Question:	Are the hooks wide enough to accommodate mountain and cruiser bike tires/wheels
Answer:	No, you can remove a bike from the middle without removing the other bikes.

• Save Space & Conveniently Store Your Bike - Free-up your floor space - Keep your garage or indoor space tidy and clutter-free. Our high-quality future proof wall hanging solution to bike storage is great for apartments, homes, garages and sheds. Storage system fits most bike types: road, cyclocross, hybrid and MTB. Can hold bikes up to 22kg / 48.5 lbs weight load. Note: Not suitable for bicycles with wide handlebars (31 inches / 78 cm), long wheelbases or fat bikes.
• Safe & Secure – Store your bike in a horizontal position, allowing for convenient storage and removal. Wall mount made from strong steel with scratch-proof coating. Bike arm locking mechanism uses a ‘reliable’ ratchet gear system to securely hold bikes. Wall hanger’s angle (up to 88°) can be adjusted to keep your bike level, catering for different bike frame angles, shapes and sizes.
• Easy to Install & Adjust – Detailed installation instructions and mounting screws included. Adjustable cradle arms ensure that all size and shape bicycle frames can be accommodated, with push button lock system to secure your ride. Hanger beam can be adjusted to fit all environments and widths of bicycles, extendable from 8.7 inches up to 12.6 inches – secured using secure push button mechanism.
• Scuff-Free Storage – Arm ‘cradles’ made from soft TPR rubber material that will not scratch your bike, whether aluminium, titanium, carbon or steel. Cradles protect frame finish and holds complex tube shapes with no concern for marking or movement. Supplied with ultra-strong elasticity rope to loop around front wheel and bike frame, to prevent front wheel knocking against your wall.
• Pro Quality – We’re so confident about our top-quality racks that if you have any product issues, we’re very happy to either provide a Refund or a Replacement on your purchase! We’re also here to support you if you have any questions or queries, please get in touch and we’ll gladly help. Important: only install bike wall hanger on a solid stud, beam, masonry or concrete wall. Do not install on ‘unsupported’ wall surfaces e.g. plasterboard wall unless there is a strong wooden stud behind it.

User questions & answers

Question:	Can someone confirm distance between the two top screw holes of part that attaches to wall? Have a stud to attach to but stud width is only 1.5 in
Answer:	Not far. The top bar has a flat hunk of plastic (an inch or so thick) that must make direct contact with the wall. The legs curve forward a bit, and they probably sit about a foot from the wall, I reckon.
Question:	Will this fit on a Pivot Mach 429 Trail mtn bike
Answer:	I have mine on carpet and it works great.
Question:	Can i use it as a bike repair stand
Answer:	Cut a hole in the roof of your shed.
Question:	can the mounting bracket be turned 180 deg for install putting the single hole at the top for center of stud & still keep correct orientation holder
Answer:	Might help to get a horizontal adapter bar for women’s frames. They are used for trailer hitch bike racks. Typically run about $10-$20.

Product features

SAFE AND STURDY BIKE STORAGE

Store your bike safely with our well-made bike wall hanger. ‘Beefy’ design and construction - made from strong steel delivering secure storage for one bike up to 22kg/48.15 lbs (vs competitor hanger made from aluminum with a weight limit of <18.1kg/<40 lbs).

Strong and reliable ratchet gear system holds arms securely for safe bike storage. Secure ‘push button’ mechanisms ensure hanger beam and arms are locked in place.

Supplied with ultra-strong elasticated rope to loop around the front wheel and bike frame to prevent front wheel knocking against a wall.

IMPORTANT: Please measure your potential bike storage set-up prior to purchase to ensure you have enough space and the style of storage set-up is compatible with your needs.

ADJUSTABLE & PRACTICAL

Highly adjustable arms and hanger beam allow for different bike frame geometry, bike sizes and handlebar widths (up to 31 inches / 78 cm) so a bike can be stored and displayed in a horizontal position for convenient and safe storage.

Arm cradles made from soft rubber material for scratch and scuff free storage. Cradles feature innovative ‘spacing channel’ ensuring top tube cables are not crushed or displaced.

IMPORTANT: for certain types of recreational or commuter bikes - women's, ‘Dutch’ (European) or kids - which do NOT have a ‘horizontal’ or ‘straight’ top tube, you will need to use a top tube / cross bar adapter (adapter not included with hanger. Adapter sold separately).

FREE UP FLOOR SPACE AND GET ORGANIZED

Great indoor bike storage solution saving you valuable space - for use in garages, homes, apartments and sheds. Includes detailed and straightforward instructions.

IMPORTANT: ONLY install bike wall hanger on a solid stud, beam, masonry or concrete wall. DO NOT install the hanger on ‘unsupported’ wall surfaces e.g. plasterboard wall, UNLESS there is a strong ‘wooden’ stud behind it.

Hanger is compatible with standard US ‘2 x 4’ (or '2 x '6) wooden stud (1.5” wide x 3.5” deep). Depending on your specific stud wall set-up, a wooden mounting board might be required for extra support (extra mounting board not included). Mounting board should be installed first onto plasterboard wall and then the hanger onto the mounting board.

BEST SELLERS

With over 500,000 bike tools and products sold so far - that many people can't be wrong!

AWARD WINNING

Award Winning Products including Outdoor Gear Lab's Best Buy Award Winner August 2018 for 'quality products that offer the most bang-for-the-buck

COMMUNITY

We've partnered with cyclists and cycling teams around the world to support all areas of cycling.

PASSION

Everyone on the PRO BIKE TOOL Team is a passionate cyclist, this is what we love!

Who We Are

PRO BIKE TOOL was born in 2015 when founder Chris left the safety & security of corporate life to follow his passion for cycling.

Taking a huge leap of faith into the world of entrepreneurship, Chris dedicated himself to building a business that produces the highest spec tools at a value making them accessible to all riders.

We pride ourselves on giving you the ultimate user experience. From our top-quality products to our commitment to great service, we’re here to make your life easy.

Product description

ABOUT WALLMASTER

WallMaster is a manufacturer specializing in bike storage tools, hooks, racks, hangers and other home improvement tools for garage, basement, utility room or shed.

We got this whole vertical organization system to manage everything in order and make more room for you. I wouldn’t say it’s a life saver, but definitely a space saver.

You got requirements, we got solutions for you!

Have you ever complained that the bikes are always on the way whenever you come into the garage?

Here is the solution. You mount them on the wall when you finish your riding.

With our WallMaster Bike Rack, you can easily mount all your bikes on the wall, which also makes a beautiful scene.

Our bike hanger can hold up to 50lb, and it needs to be fixed with 4 screws, which come with the bike rack.

And the installation is pretty simple. All you need is an electric drill that got the screws into wall.

Our heavy duty bike hooks fits for most of the bicycles, like mountain bikes, road bikes, bmx bikes, kids bikes etc.

The hooks on top have got rubber covered, which will protect the tire of your bike from scratching or slipping.

SPECIFICATION

-Material: Steel

-Length & Width & Height: 10in*3.8in*4.9in

-Weight: 1.8lb / 0.8kg

-Weight Capacity: 50lb / 22kg

-Feature: Anti-Scratch Rubber Hook

INCLUDE

2 x 10" Bike Rack

8 x Metal Screws

8 x Wall Anchors

• ◆EASY TO INSTALL & SPACE SAVER→ With 4 screws, you can mount the bike rack securely to the wall. Please find the correct height placement before you get started. Free up valuable space in your garage.
• ◆ANTI-SCRATCH RUBBER HOOK → Rubber-coated hooks prevent bikes from being scratched or slipping.
• ◆HEAVY DUTY → The maximum hanging weight up to 50lb. Strong enough for most kinds of bikes, like mountain bikes, road bikes, adults bikes and kids bikes etc.
• ◆SAFETY SYSTEM→ Fixed hook design can prevent accidental release.
• ◆SPECIFICATION → Quantity: 2 Pieces; Material: Solid Steel; Rim Size: 3.3 inch; Color: Black

• PRACTICAL:Simply installed,no assembly required.The fixed hook lets you hang and detach the bike in a second.Space saving,great for shed corner and garage storage .
• SAFETY:Unique safety hook design can prevent accidental release.
• ANTI SCRATCH RUBBER HOOK:The metal hook cover with thick rubber to prevent from scratching the bike rim.
• HEAVY DUTY:The thinnest of this bike hanger up to 0.1",weights up to 1.25lb that ensure it won't bend .it's maximum hanging weight up to 65lb.Strong enough for MTB road bike, folding bike,kids bike etc.
• LIFETIME WARRANTY:The bike hanger is built to last.We stand behind our product and provide lifetime warranty.If you do not like it just return and we will full refund for you.no question ask.

User questions & answers

Question:	Everyone,Does the hook is fixed? I do not like the fold hook,as it is difficult to take the bike out and hang up the bike
Answer:	Yes, the hook is fixed and does NOT move. Which makes it easier to remove the bike.
Question:	Do you make one that lets you hang bike from left side...current one is from right
Answer:	It only comes one way. I can't imagine that it really makes a difference if the wheel hangs hooked from the right of the left. Unless you question has to do with hand dominance, but still would not matter on how the bike hangs. I don't know if this answers your question.
Question:	How do you get the handle bars to not fall to the side
Answer:	Just had this problem. The hanger was too low on the wall. Stand the bike up as it will hang and measure vertically from floor to front hub. Then, the hook needs to catch the rim about 6" higher (3 spoke openings up on my 27.5"). After raising my hanger two hole patterns or 5 1/2", the front wheel sits in the channel now.
Question:	Can it hold road bike too or is it too wobbly for that
Answer:	It'll hold a road bike just fine. The front (or rear depending on how you choose to hang your bike) wheel rides in a track (next to the hook) which helps to stabilize the entire bicycle, whether you hang it from the front or rear wheel.

Product features

Suitable for Most Bikes

Dirza bike hanger is designed for most of bikes.Bike hanger track has an inclined "fence" make it compatible for Mountain Bikes,Road Bikes,Lady Beach Cruiser Bicycle that tire wide not over 2.6".

Smooth Powder Coated

Made of high quality steel and heat treated powder coated technology. The bike holder have smooth, even coating which makes it look amazing.

Upgraded Hardware

With upgraded hardware, the garage bike rack is very easy to install.Marking the position that you want to hang the bike and pre-drill 4 holes to install the bike rack.Only need to take a few mintues then ready to go!(The bike storage system require install on stud,masonry or concrete wall,do NOT mount on plasterboard unless there is a stud behind it.)

Excellent Bike Hook

Our bicycle hook is the perfect product to hang a bike.We considered various situations and finally designed this simple, safe and practical bike hook.

1.The fixed hook and easy-to-take design makes it easy to take out and hang up the bike

2.Unique safety hook design prevent accidental release.

3.The hanging hook cover with thick rubber,never worry about scratching your bike rim,even if carbon rims.

4.Anti-slip embossed design prevents tire slip.

5.The"track"design make the bike hanging more stable.

Perfect Solution for Storage Bikes in the Garage/Shed/Small Space

Hanging bikes on the wall,free up valuable ground space,Our bike storage rack is great for garage,indoor,apartment with limited space!

If you have a small garage or an indoor space.

If you want to keep your garage tidy.

If you want to save garage space.

Don't hesitate and take our bicycle holders!

This is the one you're looking for!

Product description

Because you love your bicycles, when you’re not riding them you want to protect them, but you also need to be space conscious. Introducing the Velo Hinge, an innovative and elegant bike storage idea that hangs your bike by the front wheel and allows it to safely swing sideways, to its smallest footprint. Fitting almost any bike and swinging left or right to match your needs, the Velo Hinge maximizes your space while showing love to your bicycles and your living space. And when not in use, it tucks away so you’ll hardly know its there.

• Available Velo Hinge Long Hook accessory for deep profile road wheels and wide mountain bike rims/tires
• Hook opening of 2.8″ (7.4cm) can accommodate most road, cyclocross and mountain bikes
• Maximizes available bicycle storage space for apartments, garages, basements and sheds
• Patented hinge design allows the bike to pivot left or right
• System fits most any road bike, cyclocross bike, mountain bike, or kids bikes
• Ideal for storing bikes in a small space
• Front wheel hook mounts to any standard wall stud

User questions & answers

Question:	how much does it weight without the package
Answer:	of course
Question:	Can you hang alternately from front and then back wheel to fit in more bikes? Do they ship with the little bottom bumper piece
Answer:	Yes, I tried. Contact the seller and receive a reply soon.
Question:	It sounds like Width has been an issue, can someone answer if the hook will support a fat bike tire
Answer:	Recommended to install on solid walls: wood, brick, concrete wall, etc. (no drywall). Get the MAX Load-bearing Capacity.
Question:	About how far out into the room does the bike stick out after being rotated as close as possible to parallel with the wall
Answer:	Yes, you can adjust the hook left and right according to the size of the bicycle.I hope this helps.

Product features

Space-Saving Design

Because you love your bicycles, when you’re not riding them you want to protect them, but you also need to be space conscious. Introducing the Velo Hinge, an innovative and elegant bike storage idea that hangs your bike by the front wheel and allows it to safely swing sideways, to its smallest footprint. Fitting almost any bike (does your bike require a Long Hook?) and swinging left or right to match your needs, the Velo Hinge maximizes your space while showing love to your bicycles and your living space. And when not in use, it tucks away so you’ll hardly know its there.

Simple, Secure & Effective

Because you love your bicycles, when you’re not riding them you want to protect them and you need a simple, effective wall-mount bike parking solution. The Velo Wall Rack is a high quality, versatile bike storage idea for one bike. The arms (independently) adjust vertically, and have soft rubber cradles protecting your bike’s finish, making the Velo Wall Rack a brilliant, minimalist bike storage solution for expensive road, cyclocross, mountain and some electric bikes.

Storage for Bikes, Wheels, Tires and More

Sometimes the most convenient bike and wheel storage solutions are also the most simple. And with the Velo Wall Post we decided that simple and elegant weren’t mutually exclusive. Use it to hang your bike, your wheels, spare tires, tubes you’ve been meaning to patch, pre-glued tubular tires, your rain-soaked kit after a long ride, or whatever sporting goods storage needs you can dream up. And when you’re not using it, fold it up out of your way and you won’t even notice it’s there. If that weren’t enough already, there’s also a port for your lock to make sure your belongings stay put.

Elegant & Adjustable Wall Storage

Because you love your bicycles, when you’re not riding them you want to protect them and you need a simple, effective, wall-mount bike parking solution. The Velo Wall Rack 2D is a high quality, versatile bike storage idea for one bike. The arms adjust horizontally and vertically, and have soft rubber protecting your bike’s finish, making the Velo Wall Rack a brilliant bike storage solution for expensive road, cyclocross, mountain and electric bikes. Available in Black or Silver.

Innovative Designs

All our products are engineered in Golden, Colorado, USA. The designs are a result of nearly 100 years of combined cycling expertise - we ride, we race, and we wrench on bikes. We prioritize designs that make cycling just a little easier - we Simplify Your Cycling.

Adaptable & On-Trend

Because we engineer our products, we create features with real user benefits. Our elegant home and commercial bike storage options evolve with bicycle manufacturing standards, so our stands always match your bike's unique specifications. Adjustable vertical for perfect frame positioning? Yes! Independent horizontal adjustment for perfect placement away from your wall? Yes!

Thoughtful Products

Floor-to-ceiling? Floor-to-rafter beam? Yes, of course! As riders, we want to take care of our bikes, just like you. We want to display our bikes, and we want everything to compliment our living space, so those are the products we make. If you truly love your bikes, we're confident you'll love our products!

Protective Designs

We love our bikes, just like you. We daydream about riding, just like you. So we design our products to make displaying your bike easy, and ensure the way your bike is supported is safe, because that's what we want for ours.

Product description

ALAZCO 8pc Heavy Duty Multipurpose Utility Storage & Bike Hook - Space Maximizer Instant Organizer Garage Basement Tool Shop Mount Bicycle Hang Garden Hose Cords & More up to 60 lbs (bikes typically weigh around 18-26 pounds)

• MULTI-PURPOSE UTILITY STORAGE HOOK & BIKE HOOK: Perfect solution for ceiling or wall hanging mounting of bicycles, recreational equipment, garden hose, cords & power equipment, Strollers, scooters and tools.
• INGENIOUS DESIGN: Unique design for easy on & off. These hooks save space and maximize your space in home and apartment, garage, basement, shed or tool shop
• HEAVY-DUTY CONSTRUCTION: Heavy-duty galvanized steel with a soft non-marring, non-slip black vinyl finish that helps protect against scratches and scuffs, each hook can hold up to 60 lbs
• EASY INSTALLATION: Simple! Best to install in studs and wood wall to ensure maximum strength. For drywall, use proper anchors (not included)
• SIZE: 6 inches (length) x 2.5 inches (width). 60 lbs capacity (bikes typically weigh around 18-26 pounds) - 8 hooks per pack by ALAZCO

User questions & answers

Question:	Where are these hooks made
Answer:	I don't know where they are made, but they did seem to be of good quality and worked well for hanging bikes.
Question:	Are any tools necessary to insert into a stud? If yes, then what
Answer:	I use these for halter and bridle hooks in my barn and did not have to pre-drill. They are sharp and easy to insert/screw in. Yuou may need to pre-drill if your material is harder than wood.
Question:	Can I screw these into a tree
Answer:	I Really wish you would not screw them into a tree, however they will if screwed into a stout branch.
Question:	Does anyone know the dimensions of the screws so I can select the right anchor
Answer:	I used theses in a 2x4 wood strap. Drilled a 5/16" hole and threaded them in. They are very good steel and are holding up well--I hang my fairly heavy extension cords on them. However, if you are using them in a concrete or hollow wall application, I would buy the hooks and take one to a hardware store to match up with a proper anchor. Hope this helps.