14 best gocontrol home security

Product description

Control lighting and other appliances from anywhere with the Kasa Smart Wi Fi Plug. Schedule connected devices turn on when you get home, then power down when you go to sleep. Control each outlet individually or as one, set schedules or scenes, even use voice commands with Amazon Alexa, Google Assistant, or Microsoft Cortana.

• Control From Anywhere: Turn electronics on or off from anywhere with your smartphone using the Kasa app (Compatible w/ Android & iOS)
• Voice Control works with amazon Alexa, Google Assistant and Microsoft Cortana supported devices for a hands free experience; Operating Temperature: 0 ºC to 40 ºC (32°F to 104°F). Operating Humidity: 5 percent to 90 percent RH, Non condensing
• Flexible Control: UL Certfied to switch upto 15A, for flexible control of a wide range of plug in devices
• Kasa scenes & schedules: Schedule the Smart plug to automatically switch on and off when away or set a scene for controlling many devices with a single button
• Note: Requires a secured 2.4 gigahertz wifi network connection

User questions & answers

Question:	I just returned this smart plug after their tech support told me it could not be used with Kindle Fire. Any good alternatives
Answer:	I used my smart phone to get the app from google play store and set it up. You may be able to use your computer. It works well with the echo it is just a dace to get there. Good luck
Question:	Can you plug in a power strip to this device
Answer:	Yes - however, please bear in mind that toggling the Smart Plug on/off will affect all appliances/devices plugged into the power strip. Please also make sure the total power draw from the appliances/devices connected to the power strip does not exceed the Smart Plug's load specifications: Input voltage: 100 - 120VAC, 15A Output voltage: 100 - 120VAC, 15A Maximum Load: 15A Maximum Power: 1.8KW Regards, TP-Link Support
Question:	What is max wattage of device to be connected to Smart Plug
Answer:	Mine caught on fire with a little 1500 watt space heater, and to compare, my hair dryer is 1875 watts (not plugged into a smart plug of course), so it doesn't take much for these to catch on fire. Be careful if you use anything in it larger than maybe a desk lamp in my opinion. I unplugged all 3 of my kasa smart plugs and won't use them anymore.
Question:	Does this device retain the settings if power is disconnected? Power outage, breaker blown, etc
Answer:	Two parts to this answer... First, yes it retains it's settings if the power is off or it's unplugged. Second, I powered on my lamp then unplugged the unit from the wall. Upon plugging it back in after a couple seconds it turned itself back on (the last state it was in) and within a few more seconds re-connected to my wifi network.Hope this answers peoples questions about power outages and operation...

Product features

Save Money by Running the House on Your Schedule

The HS100 allows you to create schedules to automatically power on or off your home electronics and appliances at anytime. You can create a schedule for each device any day of the week, or customize it by a specific time in a day.

Keep energy bills low by effectively managing devices that use the most power. Scheduling allows you to prevent power-hungry devices from being left on longer than needed.

Have your devices run on your schedule, even when you’re not there.

Control from Anywhere

Your Smart Plug can be controlled through your existing Wi-Fi network via the free Kasa app*. Download the app to your smartphone or tablet and have access to turn your home devices on/off, set schedules and appear at home when you're away.

The Kasa app allows you to add as many Smart Plugs as you’d like to keep track of multiple appliances, whenever, wherever.

*Compatible with Android 4.1 and higher or iOS 9 and higher.

Appear at Home While You’re Away

Have the Smart Plug work for you when you’re out of town. Connecting a lamp to your smart plug can provide home security benefits. Set it to Away Mode, and the Smart Plug will automatically turn the light on and off to give the appearance that someone is home.

Never Leave Things Running

The Smart Plug gives you the peace of mind that you’ll never leave devices running again. With the countdown timer feature, simply set a timer for the Smart Plug to turn off its appliance automatically. Set it and forget it. It’s that simple, giving you one less thing to worry about in your busy life.

Keep Your Kids on Schedule

With the scheduling benefits of a Smart Plug, you have better control over your child’s daily activities. Make sure the television is turned off when they should be doing homework, or use a countdown feature to have any lamps shut off right before bedtime.

Control with Your Voice

The Smart Plug works directly with Amazon Alexa,Google Assistant and Microsoft Cortana to manage your devices through Voice Control. Assign a name to each Smart Plug and communicate with each plug by name when making a voice command. You can also create a group for all your smart devices and control them all with one command.

One App for All

The free Kasa app works with all TP-LINK smart home devices, allowing you to easily control your home from any Android or iOS device.

No Hub Required

The Smart Plug works with any Wi-Fi router without the need for a separate hub or paid subscription service.

World’s #1 Consumer Wi-Fi Brand*

Nearly half the people in the world who use Wi-Fi networking products use TP-Link. With over 150,000 products shipped daily, substantial investment in research and development, and meticulous in-house design, manufacturing and testing, we’re proud to be the world leader in Wi-Fi.

*According to latest published IDC Worldwide Quarterly WLAN Tracker Report, Q3 2016 Final Release.

Product description

Control lighting and other appliances from anywhere with the Kasa Smart Wi-Fi Plug mini. Schedule connected devices turn on when you get home, then power down when you go to sleep. Control each outlet individually or as one, set schedules or scenes, even use voice commands with Amazon Alexa, Google Assistant, or Microsoft Cortana. Frequency Range: 2.4GHz; Protocols Supported: IEEE 802.11b/g/n. Operating Temperature: 0 ºC~ 40 ºC ( 32°F ~ 104°F ).

• Control From Anywhere: Turn electronics on or off from anywhere with your smartphone using the Kasa app (Compatible w/ Android & iOS)
• Voice Control: Works with Amazon Alexa, Google Assistant and MicroSoft Cortana supported devices for a hands free experience
• Compact Design: Won't block the other wall outlet allowing two Smart Plugs to be installed side by side
• Kasa scenes & schedules: Schedule the Smart plug to automatically switch on and off when away or set a scene for controlling many devices with a single button
• Note: Requires a secured 2.4 GigaHertz Wi Fi network connection

User questions & answers

Question:	How to pare to the tp_link
Answer:	lost my Smartphone so lost control of Alexa and all Smart plugs at home. had to disable all. Next time I will only install Home of Things Smart plugs and Voice assistant so we can control home from home without the need for a smartphone or cellular contract, internet of insecurity of Cloud networks. installing a Mesh Fog network at home with a Home of Things devices that do not need the internet to manage home.
Question:	Could you plug a 6000btu ac unit
Answer:	Yes - to integrate your smart plug with Google Assistant/Home, you'll need to create a free Kasa account, which can be done using the steps outlined in our FAQ here: http://www.tp-link.com/us/faq-948.html You can then add the smart device to your network using the steps here: http://www.tp-link.com/us/faq-946.html Once the smart device is added to your network and account you can integrate it with Google Assistant, as shown here: https://www.tp-link.com/us/faq-1765.html If you’d like assistance with any of these steps, please feel free to e-mail [email protected] and we'll gladly have a Support Agent follow up with you directly. Best Regards, TP-Link Support
Question:	I'm having difficulty controlling my mini plug through Alexa and the Amazo echo, is anyone else able to use Alexa
Answer:	This device uses a patented RF technology called Clear Connect that is not compatible with Belkin switches.
Question:	Will this work with google home
Answer:	If the PJ2-3BRL-GWH-L01 is programmed to two different dimmers, it will control them both simultaneously. This device can not be used to control two different dimmers independently, two different remotes would need to be used.

Product features

Your Home. One App.

Control all your Kasa light strips, bulbs, plugs, switches, and cameras using the friendly Kasa Smart app, eliminating the need for multiple apps to control your smart home.

Product description

Arlo Smart Home Security Cameras are the world’s FIRST 100% wire-free, HD, Indoor/Outdoor video cameras for home monitoring. Motion activated cameras initiate automatic recording and alert you via email or app notifications. Free apps enable remote monitoring from anywhere and with the built-in night vision you’ll even see in dark.

• Works with Alexa for voice control (Alexa device sold separately); Audio not supported
• Patented 100 percent Wire Free design for easy placement anywhere and field of view 110 degree
• Night vision cameras work even in the dark
• Motion activated cameras and real time email or app notifications
• Records and alerts only when motion is detected so no battery power ever goes wasted Battery:Four Lithium CR123 Photo
• Indoor/ outdoor weather resistant cameras; Operating temperature: 14° to 122° F (-10° C to 50° C)
• App to securely view live video while home or away
• Arlo Smart adds powerful intelligence to your Arlo cameras; Customize alerts to detect people, specific zones, and contact emergency responders right from your smartphone's lock screen (optional service, includes 1 month trial)

User questions & answers

Question:	How long does that battery last under normal operating conditions
Answer:	Hi there. If desired you can install with screws. However the screw holes and bolts are not provided as it is not a necessity given the strength of the adhesive steps and if installed as per guide. If you scroll through some of the product review photos on this pages you will see examples of those who have indeed installed with screws. 👌😻
Question:	Is local storage supported? What happens when you lose internet connection
Answer:	The product fits any door of minimum 1.3 inches. There are two main elements, both are bonded to their respective face of the main door.
Question:	A question here: do vms330, 3430, and 3530 use the same type of batteries? do you guys find ideal batteris for them
Answer:	The internal dimensions of the opening are 6" high and 7" wide. Cats up to 20lbs can pass through quite comfortably.
Question:	will it save recordings for the police
Answer:	Yes - "Fits both hollow and solid doors greater than 1.25” thick " as per product specifications.

Product features

Arlo Smart Home Indoor/ Outdoor HD Security Camera

The Arlo camera is a 100 Percent Wire-Free, completely wireless, HD smart home security camera – so you can get exactly the shot you need – inside or out. The Arlo camera is weather-resistant and includes motion detection, night vision, and apps. It can capture clips and send you alerts whether you’re at home or away for round-the-clock peace of mind.

Service is included

F.A.Q

• Keep active locations in the camera's field of view. Your Arlo camera has a 110-degree viewing angle. Position your camera so that the space that you want to monitor is within the camera's field of view.
• Elevate your camera. Mount your Arlo motion-detection camera at least 7 feet (2.1 meters) above the floor and aim it slightly downward for the best sensor performance.
• Ensure that side-to-side traffic crosses Arlo's field of view. Arlo's motion sensor is much more sensitive to side-to-side movement across its field of view than to movement directly toward or away from the camera. The best area for motion detection is 5 feet to 20 feet (1.5 to 6 meters) from the camera position.

How can I extend the range of my Arlo system?

Instead of connecting the Arlo base station directly to your router, you can connect the base station to an Ethernet port on a Wi-Fi range extender or Powerline adapter. This means you can put the Arlo base station farther away from the router or in a central location in your home to get better coverage with your Arlo cameras.

Does motion detection work through glass or windows?

Motion detection does not work through windows reliably. Arlo cameras use motion detection technology that is inhibited by glass, especially windows. Passive infrared, the type of motion detection used by Arlo Wire-Free cameras, detects changes in heat. Most glass used in homes today is insulated, limiting the movement of heat through the glass.

Product description

Featuring both Z-Wave and Zigbee radios, the GoControl Z-Wave/Zigbee QuickStick Combo is a USB stick that allows you to create an interface between your Z-Wave/Zigbee compatible controller/network and a third-party computer or other host device, such as a PC, Mac, Raspberry Pi, etc. Simply plug the QuickStick into an open USB port and use your third-party home automation software to interface with your Z-Wave/Zigbee network. The QuickStick Combo (HubZ) is a USB v2.0 full-speed low power Z-Wave and ZigBee adapter in a thumb drive form factor. When plugged into a host device, it appears as two serial ports. FEATURES: Provides interface between your PC and Z-Wave/Zigbee network. Plugs into a standard USB port on the host device. Works with third-party home automation software. "Z-Wave Plus" certified for wide compatibility: Z-Wave Plus is an upgraded certification program to help you identify products that take advantage of the "Next Gen" Z-Wave hardware platform, also know as 500 Series or Gen5 Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance your experience with faster and easier installation and setup. Z-Wave Plus advancements also provide longer battery life, faster operation, better wireless range and improved noise immunity.

• Provides interface between PC and Z-Wave/Zigbee network
• Plugs into a standard USB port on the host device
• Works with third-party home automation software
• Appears as two serial ports
• Z-Wave Plus certified for wide compatibility

User questions & answers

Question:	What is the range of this device and is it z-wave or z-waze
Answer:	This device supports Z-Wave Plus. You can find the manufacturer "documentation" here: https://goo.gl/0pAVzn (it is pretty sparse/basic)Their documentation unfortunately doesn't get into specifics regarding range. My current implementation with this device in my setup also doesn't really stretch the range yet (but I hope to soon).
Question:	Where can i find the drivers for windows 10? device reports itself as "hubz zigbee com port" and "hubz z-wave com port" however no drivers can be foun
Answer:	The question is drivers for what? It is using the com ports, so it is being recognised, but you want to do something with it, right? What do you want to do? Some piece of software that you are using on Win10 must be able to use a Zigbee or Z-Wave device. If they need that, they can communicate with the required comm port.
Question:	Work good on pi 3b+ with openHAB
Answer:	I bought one a few weeks ago. It's not hard to find. And it works with openHAB on a Pi 3b+.
Question:	Can this work with Xiaomi's sensors
Answer:	Yes. I got this to read xiaomi aqara temperature sensors with home assistant installed directly on a Pi and also on a virtual box instance with windows 10 as a host.

Product description

The go control z-wave battery-powered smart thermostat is a battery-powered z-wave thermostat that connects to all z-wave hubs including the 2gig gc2 panel, giving you control over your homes comfort wherever you are. This model is designed to be incredibly easy to install and includes a front-loading battery compartment to hold 4 aa batteries to power the thermostat for 2 full years. Or, it can be powered by the hvac systems 24-volt ac c-wire. The 7-character scrolling display makes programming simple.

• Works with Alexa for voice control (hub required, Alexa device and hub sold separately).
• Z-Wave compatible - Ver. 4.5.5
• Supports Z-wave Flirs Functionality. The GC-TBZ48 works with most contemporary Central HVAC systems whether standard or heat pump which makes this thermostat a great solution for all retrofit or new construction needs. Wall mount or mounts on single-gang junction box
• Works On Standard Hvac Systems With 2-stage Heat & 2-stage Cool. USB firmware upgrade ability
• Works On Heat Pump Hvac Systems With 3-stage Heat & 2-stage Cool

User questions & answers

Question:	Can this thermostat control a z-wave outlet to turn on a plug-in heater at a set room temperature
Answer:	I believe the short answer is "no" - However depending on what 'hub' you are using for automation, once you add this unit to your smart devices you might be able to set up an automation script where the hub would send the command to turn on the outlet for the plug in heater when the thermostat reaches a certain low temperature and turn it off when the temperature reported by the thermostat reaches a certain 'high' temp but would be done on the controller level - not within the thermostat. Hope this makes sense! I think you can do this within the smart things app if you are using that but would have to test and I don't have the smart outlet or a need to do this myself.
Question:	Is this a standalone unit, or does it require connection to a hub
Answer:	The beauty of this thermostat is it has a very simple user interface and it will work manually or connected to a z-wave hub. In manual mode, you do not have a scheduling function, but that's what you use a hub for. I have about 10 z-wave devices connected to a Wink hub (about $70) and set schedules through the app, which is a much better interface than, say, the touch screen interface on many of the Honeywell thermostats and doesn't cost a cent to maintain the schedules on the Wink cloud. So, if you don't care about schedules, it doesn't matter. If you do, then a setup like Wink is more universal and you won't be paying for extra thermostat features that you don't even use.
Question:	Does it work with google home. if so what hub do i need
Answer:	No, not directly as Google Home is not a zwave controller, you need a z-wave hub/controller first to control zwave devices. The only zwave controller that is compatible with Google Home at this time, is SmartThings hub, so if you have an ST and GH, yes they will work together.
Question:	The manual says DO NOT USE batteries if you are using your house power (i.e. common 24V). Can you use batteries as a back up power source
Answer:	There's not much reason to. If your furnace/AC has power, the unit would have power. If it doesn't, there's nothing for the thermostat to do because they won't turn on anyway. Its not a programmable thermostat, so there's no settings to lose. Your automation controller has to be the source of the schedule for this, so you'd just set it to recover the device when power came back on. That said, it probably won't hurt anything to have the batteries in there. The real issue is you do not want to join it to the Z-wave network using batteries if you're hard-wired, because it joins the network differently to conserve power. I suspect that's really why they say that.

Product features

GoControl Z-Wave Thermostat

Manage your comfort at home or across the globe with the GoControl Z-Wave Thermostat. This battery-powered smart thermostat can be controlled by all Z-Wave hubs, including the 2GIG GoControl security system. Integrate your thermostat with Z-Wave so you can control the settings using your mobile device. This thermostat is easy to install and comes with four AA batteries.

What’s in the Box:

Mobile Climate Control

Adjust your home's HVAC settings wherever you go by connecting your thermostat and Z-Wave hub to an integrated app on your smart phone or tablet. Keep your home climate comfortable and at the optimal settings for energy savings, whether you're in your living room or a hotel room across the globe.

Easy Installation without a Contractor or Electrician

Designed for easy installation and flexibility, the thermostat works with most contemporary central HVAC systems, whether standard or heat pump. The front-loading compartment holds four AA batteries for two years of power. Battery-powered, low-voltage integrators can connect the thermostat to 95% of HVAC systems without the help of an electrician or HVAC contractor, or power the thermostat by connecting to the HVAC system’s 24VAC 'C' wire.

Save Energy with a Smart Thermostat

Heating and cooling is the largest energy expense for most households, accounting for 48% of the energy use in a typical US home. When set properly for current weather conditions, smart thermostats are estimated to save homeowners an average of 5% to 15% (and sometimes more) off those energy costs.*

*From energy . gov.

Compatible with all Z-Wave Hubs and More

This thermostat is designed for use with all Z-Wave hubs, including 2GIG GoControl security panels. It also works with Alarm.com, Telguard, and Uplink systems.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it's simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency, support network-wide inclusion, and are security-system compatible.

From Nortek Security and Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

The GoControl GD00Z-8-GC Garage Door Remote Controller Accessory offers the latest in control and convenience. The controller is compatible with most automatic garage door openers connected to a sectional garage door.

• Compatible with virtually any non-smart garage door opener
• Z-Wave Plus Cerification
• Provides Audio and Visual warning prior to door movement
• S2 encryption for more secure communication
• Over-the-air firmware updates

User questions & answers

Question:	Seriously, this thing gets firmware updates over the internet
Answer:	The B6765, is compatible with ring app.
Question:	Does it come with the same garage door tilt sensor that came with gd-00z-4 that i bought a few years ago
Answer:	I paid $30 a year for 7 day history. The other option is $100 for 30 day history
Question:	Is this compatible with Samsung smarthings
Answer:	No, the B6765 is not compatible with the power door lock. The B6765 does not have a connection for the lock.
Question:	What’s the app associated with this
Answer:	Thank you for your question. To integrate with Apple HomeKit, you will need to purchase our Home Bridge product. There is no subscription free required.

Product description

The Linear Z-Wave 300-Watt Plug-in Dimmer Switch is designed to provide Z-Wave control to a connected lamp with dimming capabilities. This module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. This module integrates with other Linear Z-Wave enabled products and can also act as a wireless repeater to ensure that commands intended for another device in the network are received--useful for times when a device would otherwise be out of radio range.

• Plug-In appliance/lighting module with Z-Wave Technology
• Easy to use with no wiring required. Just plug it in and it works with any certified z-wave gateway.
• Go Control Z-Wave lighting devices can be voice-controlled using the Amazon Echo and Wink smart hub
• Nortek security & control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. of z-wave products
• Control the smart appliance switch from anywhere by Wi-Fi or with internet-connected smart phone or tablet via the hub/controller app.
• Operating frequency : 60 Hz
• Uses Z-Wave's Scene Command Class

User questions & answers

Question:	Can the gocontrol lamp dimmer linpd300z2 be paired to 3gig gc2 control panell
Answer:	Yes that should work
Question:	I have a 100w equivalent led dimmable bulb. will this adequately dim this bulb to very low levels? other dimmers seem to reduce to about 30% only
Answer:	I have a non dimmable 60 watt replacement bulb on this unit. It appears to try to dim until about 30% then under that it goes off. Not exactly what you wanted to know. This unit is big and covers two wall sockets if used in wall socket application. Good luck.
Question:	Will this work with a Vivint home automation system
Answer:	Yes it will. If your panel looks like this image it should work - https://www.google.com/url?sa=i&rct=j&q=&esrc=s&source=images&cd=&cad=rja&uact=8&ved=0CAcQjRxqFQoTCMnbypOHrMgCFcUqiAod2V4BBg&url=http%3A%2F%2Ftopsecurityreview.com%2Freview%2Fvivint-home-security%2F&psig=AFQjCNHNX9eZTBj13_cS2r2DntvIJmoejg&ust=1444159396919764
Question:	My son has a table lamp and a rope light with bare Edison bulbs. Would this dimmer work
Answer:	It should have no issue with that. The dinners actually work best with incandescent bulbs (including Edison bulbs). I use this with a led side table light with no problems other then it hums a little bit)

Product features

GoControl Plug-In Lamp Dimmer Module (Z-Wave)

The GoControl Plug-In Lamp Dimmer Module (Z-Wave) offers Z-Wave network remote control for a connected dimmable lamp. Just plug the module into a grounded AC wall outlet, connect the lamp, and turn the lamp off or on or control its brightness with your Z-Wave controller. The module's button offers local control of the lamp, and its AutoSense feature lets you turn the lamp off and on using its native switch. The Dimmer Module also works as a repeater for your Z-Wave network, extending it an additional 130 feet.

What’s in the Box:

Control Your Dimmable Lamp via Z-Wave Network

The GoControl Plug-In Lamp Dimmer Module (Z-Wave) provides Z-Wave network control to a connected dimmable lamp. Simply plug the module into a grounded AC wall outlet and then plug the lamp into the module. Once the module is added to your Z-Wave network, you can dim the lamp or turn it off or on remotely with your Z-Wave controller. The module has two outlets: one is powered at all times, while the other is controlled remotely through your network. This 120-volt AC module offers a maximum of 300 watts of power.

AutoSense Offers Local Power Control for Connected Lamp

The Dimmer Module's AutoSense feature ensures that you can control your lamp's power, even without using your Z-Wave controller. Simply turn the lamp's manual switch off and then on, and AutoSense will instruct the Dimmer Module to turn the lamp on. The module also offers local control: push and release the module's button to turn the lamp off or on, or hold it down to control dimming.

Module Supports 40 Kbps Data Transmission

The Dimmer Module can offer networking support for systems that stream metadata, such as song title, artist, and album information for streaming audio to displays around your home.

Works as a Repeater for Your Z-Wave Network

For the Dimmer Module to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater. However, this module also works as a repeater, extending your network up to an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

Compatible with All Other Z-Wave-Certified Products

Like all Z-Wave-certified products, the GoControl In-Wall Receptacle Outlet (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, thermostats, light bulbs and lighting retrofit kits and plug-in modules as well as security devices, including alert sounders, passive infrared motion detectors, and door/window sensors.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

With advanced motion detection, the GoControl Smart Doorbell Camera can alert you to the presence of visitors before they even ring the doorbell. Improve your home security by knowing who is at, or has been at your door. You can even choose to greet the visitor using your smartphone when you are there, or let your visitor think you are home when you are not. You are in control.

• Modern sleek design, multitude of faceplate colors
• Night vision
• Easy to install
• Two-way conversation from smartphone
• Powered for life

Product description

Wireless Z-Wave passive infrared motion detector, 120 degree detection angle, heat rise temperature alert, LED activity indicator, tamper switch, supports up to five Z-Wave associations.Per the E Mail I received, the item is in the home automation products category. The item is a motion detector.

• 120 Degree detection angle
• Heat rise temp alert
• LED activity indicator
• 100' line-of sight range
• Up to 5 Associations

User questions & answers

Question:	Is this compatible with honeywell lynx touch 7000 wireless alarm system wifi/zwave
Answer:	No it isn't, most security systems do not allow zwave sensors, Honeywell is no exception.
Question:	is it zwave plus
Answer:	Yes,Z wave
Question:	The motion will not connect to to smartthings, please advise, what I am doing wrong
Answer:	You may need to first reset the motion. You can do this with your SmartThings hub. Place the SmartThings hub in General Device Exclusion Mode (https://support.smartthings.com/hc/en-us/articles/200878314-How-to-exclude-Z-Wave-devices), then tamper the motion. Then try to add the motion again. If that doesn't work, or you have further questions, you can call 2GIG at (800) 421-1587 (M-F 5 am - 4:30 PM PST, Sat 7 am - 3:30 pm, Sun Closed), or email [email protected].
Question:	How long does the battery last
Answer:	Not exactly sure, but I have had two installed for over a year, and they both still show 100% battery.

Product features

GoControl Passive Infrared Motion Detector (Z-Wave)

The GoControl Passive Infrared Motion Detector (Z-Wave) provides motion-based security alerts and can also let you know about temperature changes for the area being surveyed. This wireless indoor security device senses motion activity and alerts you via your Z-Wave network. Its motion detection range is between 6 and 32 feet, and it senses and reports changes in temperature of 2 degrees Fahrenheit or greater, if desired. You can associate it with up to five connected Z-Wave devices to create your own customized home security alert responses. If the detector is tampered with, it will send you an alert and keep its red LED light on until reset. This motion sensor is compatible with all other Z-Wave-certified products.

What’s in the Box:

Senses Motion and Sends Alerts

The GoControl Passive Infrared Motion Detector (Z-Wave) is a wireless indoor security device that senses motion activity and reports it via your Z-Wave network. It has a long-life battery and sends an alert signal when the battery needs replacement. Its motion detection range is 6 to 32 feet, and it offers a horizontal coverage angle of 120 degrees. It can report temperature changes of 2 degrees Fahrenheit or greater.

Anti-Tamper Feature Alerts When Detector Is Disturbed

The Motion Detector's anti-tamper feature sends you an alert if the sensor's cover is removed, and the sensor's red LED light will stay lit once the cover has been disturbed. You can use your Z-Wave controller to connect this sensor with up to four others.

Compatible with All Other Z-Wave-Certified Products

Like all Z-Wave-certified products, the GoControl Passive Infrared Motion Detector (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, and plug-in modules as well as security devices, including alert sounders, passive infrared sensors, and door/window transmitters. For this motion detector to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

Z-Wave Isolated Contact Fixture Module

• Uses Z-Wave's Scene Command Class
• Perfect for Commercial Lighting, Dry-Contact Relays, Pool Pumps, Water Heaters, or In-Ceiling Lighting
• Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of Z-Wave products
• Mounts inside a standard single-gang junction box

User questions & answers

Question:	Will this work with an existing Nexia system or do I have to have a different controller
Answer:	It works with Intermatic controller (old enough), but I think it should work with different controllers too.
Question:	Can anyone share (written or a picture) of how they mounted this device, as it does not fit ito a decora opening
Answer:	I'm not sure if this helps, but mine sits on top of my garage door driver. The contacts are wired directly to the remote terminals, and i fashioned a power cable that is plugged in with my garage door opener.
Question:	Is the load side isolated from the 110 side? Can I use the load side as a spst low voltage switch
Answer:	Yes. They do ask that power for this device and the switched load be fed off the same circuit, but I'm not sure why. And when you're switching a low voltage load, like a garage door opener, this doesn't make sense to me (and that is a common usage for this device)
Question:	I just bought one of these. I was told it was what I needed to control my garage door. I have received it but I have no idea how to wire it up. HELP
Answer:	This unit is pretty simple to wire once you understand what a few simple things about the unit. 1. The unit needs 110v power to operate. Bummer but with the 110v the unit can act as a Z-wave repeater. I took an extra computer power cord I had, cut the computer end off and wired it to the unit, just match the color of the wires. Use wire nuts to tie the wires together and if you have electrical tape, wrap the wires and nuts for added safety. 2. The unit just acts like the button on your garage wall by closing the contacts (completing the circuit) on the garage door opener, the manual button. Find the two wires that go to the wall switch and wire each of the blue wires to each of those contacts. One of the wires is easy to find since that one wire is the only wire on one of the contacts. Once you find that one, follow that single wire to it's pair. 3. Pair up the unit Z-wave controller and you are good to go. Best of luck. Unit works great with Smartthings and a multisense sensor by the way. For additional help, see my comment below.

Product features

GoControl Fixture-Mounted Control Module (Z-Wave)

The GoControl Fixture-Mounted Control Module (Z-Wave) offers power control via your Z-Wave network. Mount it in a single- or multi-gang electrical box to operate loads or control relay-based devices. This versatile module can be isolated for use in dry or wet contact applications or powered to switch live loads. The Control Module also works as a repeater for your Z-Wave network, extending it an additional 130 feet.

What’s in the Box:

Mount in Single- or Multi-Gang Electrical Boxes

The GoControl Fixture-Mounted Control Module (Z-Wave) offers versatile applications for your Z-Wave network, including mounting in single- or multi-gang electrical boxes to operate loads or control relay-based devices. The relay can also be isolated for use in dry or wet contact applications or powered to switch live loads. It can operate loads of up to 277 volts to power motors up to 1 horsepower. It works well for commercial lighting, in-ceiling lighting and fans, dry-contact relays, pool pumps, and water heaters.

Works as a Repeater for Your Z-Wave Network

For the Control Module to work with your network, it must be within 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater. However, this module also works as a repeater, extending your network an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

Compatible with All Other Z-Wave-Certified Products

Like all Z-Wave-certified products, the GoControl Fixture-Mounted Control Module (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, thermostats, light bulbs and lighting retrofit kits and plug-in modules as well as security devices, including alert sounders, passive infrared motion detectors, and door/ window sensors.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

The PS15EMZ5-1 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times). This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range). SPECIFICATIONS Signal (Frequency): 908.42 MHz Maximum Load: Resistive: 15 amps (1800 watts) maximum, 120 VAC Motor: 1/2 H.P. maximum, 120 VAC Incandescent: 600W maximum, 120 VAC Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Network wide inclusion One controlled and one pass-through outlet Security beaming POWER REQUIREMENTS 120 VAC, 60 Hz

• The PS15EMZ5-1 Plug-in Appliance Module is designed to provide Z-Wave control to a connected load. The PS15EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the appliance or other device is then plugged into the module. Once connected, the appliance/device can be turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times).
• This plug-in Appliance Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
• POWER REQUIREMENTS 120 VAC, 60 Hz
• Signal (Frequency): 908.42 MHz Maximum Load: Resistive: 15 amps (1800 watts) maximum, 120 VAC Motor: 1/2 H.P. maximum, 120 VAC Incandescent: 600W maximum, 120 VAC
• Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Network wide inclusion One controlled and one pass-through outlet Security beaming

Product description

The GoControl Bulbz Z-Wave 65-Watt LED Indoor Flood Light Bulb is a Z-Wave light bulb that has the characteristics consumers want in a flood light form factor with the added capability of remote and automation system control. It's a great solution for consumers who want to have scene or remote control on their recessed can lights or track lighting fixtures without having to mess with electrical wiring. It's as simple as screwing in the bulb.

• Uses 7.5w Of Energy But Provides 650 Lumens as Much Light As A Traditional 65w Incandescent Flood Light Bulb
• Medium-cool 5,000k Light Appearance
• Perfect For Recessed Can & Track-light Fixtures That Use Flood Lights Such As Kitchens, Bathrooms, Living Rooms & More
• Includes Wall Light Switch Clip That Keeps The Light Switch On To Ensure The Z-wave Circuitry Inside The Flood Light Bulb Is Always Active
• Dim: 5.38"h X 3.75" Dia

User questions & answers

Question:	Does this work with Alexa as well
Answer:	110
Question:	I've read that these don't work with dumb dimmers. I have an inovelli smart dimmer, but it has an on/off dumb switch addon. Will it work
Answer:	A21 is 2.625 inches in diameter (21/8 = 2.625) and about 5 inches in height. A19 is 2.375 inches in diameter (19/8 = 2.375) and 4.13 inches in height. They both fit in the same E26 socket.
Question:	Does this work with SmartThings
Answer:	I really don't know the wattage, but they are brighter than most LED lights, for sure. I've never seen three-way bulbs that went to 150 and really like how much they light my reading area!
Question:	Does this bulb work well for outdoor fixtures? (Concerned with Z-Wave connectivity and weather
Answer:	Warm white is more yellow/pink than soft white. Older incandescent bulbs are typically warm white. Soft white is less yellow/pink and is closer to cool white or daylight. Warm white has a color temperature of 2700 K and soft white has a color temperature of 3000 K.

Product features

GoControl Dimmable LED Indoor Flood Light (Z-Wave)

The GoControl Dimmable Z-Wave LED Indoor Flood Light Bulb puts lighting control at your fingertips. Designed for recessed can lights or track light fixtures for flood lights, this bulb allows you to adjust your lighting using Z-Wave and your existing hub or controller with any mobile device or tablet. No complicated electrical wiring is required. This Z-Wave LED bulb provides energy savings over traditional flood light bulbs. It has a medium-cool 5,000K rating and includes a clip to keep the fixture's existing wall switch in the 'on' position.

What’s in the Box:

Versatile Lighting Lets You Control the Mood

This versatile lighting solution with remote control capability allows you to set the scene in your home. Compatible with four-inch or larger recessed can lights and track light fixtures, the Z-Wave Indoor Flood Light Bulb provides near-daylight illumination. Its cool, pleasant lighting is ideal in kitchens, bathrooms, family or living rooms, foyers, and offices. This bulb has a medium-cool 5,000K rating.

Mobile Control with the Z-Wave Hub

Control the dimmable bulb with your smart phone or tablet through your Z-Wave hub or controller. Create automated scene control to set the right mood, or program the bulb to turn on or off when other Z-Wave devices are activated. The Z-Wave Indoor Flood Light Bulb is also controllable using 2GIG (or other) security and automation systems.

Replace Your Flood Light Bulb without Wiring

Simply remove the current flood light bulb from your fixture and replace it with the Z-Wave dimmable bulb. A wall switch 'clip' is included to keep the fixture's existing wall switch in the 'on' position. This ensures the Z-Wave circuitry inside the bulb is always active.

Conserve Energy and Lower Your Electricity Bill

The Z-Wave Indoor Flood Light Bulb uses only 7.5 watts of energy and provides as much light as a traditional 65-watt incandescent flood light bulb (650 lumens). Its annual energy consumption is only $0.90 (based on 3 hours per day of usage), so you'll save on your electricity bill.

Add More Control with Z-Wave-Certified Products

You can expand your system with Z-Wave-certified door locks, additional motion sensors, tilt sensors, light switches and dimmers, appliance modules, and light bulbs. This gives you even more control over your home, no matter where you are.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it's simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency, support network-wide inclusion, and are security-system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015

Product description

The GoControl Z-Wave Scene-Controller Wall Switch is a smart switch cover with Z-Wave radio. Pair it with almost any type and brand of Z-Wave light controls. It is ideal for use with GoControl smart light bulbs.

• Controls Z-wave Light Bulbs, Switches & Dimmers Wirelessly
• Built-in Z-wave Radio
• Plug & Play Simple Setup
• Fits Over An Existing Wall Switch. Works with different types and brands of Z-Wave LED Light control devices
• Manually Turns On, Off Or Dims Lights
• Powered by 2 pieces of standard CR2032 Lithium Coin Cell with long battery life

User questions & answers

Question:	Can I associate my z-wave lamp dimmer with this switch so the commands go directly to the dimmer instead of the Smartthings hub
Answer:	No. This switch requires both a device handler and a smart app and it runs in the cloud so it must use the hub and the internet.
Question:	It works with toggle switch
Answer:	This is a scene controller that works only with a smart hub, like SmartThings or Vera, to run a scene. The scene can be configured/programmed to "toggle" some smart switch, but it may require additional configuration and depends on the smart controller.
Question:	I could include it to my smartthing hub. But I can't find a way to associate with lights or switches. Do I need a code to get this work? Not easy
Answer:	You have to use a smart app like "Button Controller" to associate it with your lights.
Question:	Is this compatible with the Wink Hub
Answer:	Nope. Could never get it to work with my first gen wink. Returned it

Product description

Z-Wave Single Wall Outlet 120 VAC, 15A, One Controlled Outlet

• Uses Z-Wave's Scene Command Class. The WO15Z-1 Outlet integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).
• Easily replace existing standard wall outlets to add a Z-Wave controlled outlet. Compatible with any Z-Wave certified gateway
• Outlets include a white decorative switch plate and are tamper-resistant in compliance with NEC 2008
• Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device
• Linear has provided best-in-class home & business control solutions for over 50 years and is a leading worldwide manufacturer of Z-Wave products

User questions & answers

Question:	Will this work with a wink hub
Answer:	Yes, I have it working with mine.
Question:	Does the button turn on/off the load AND allow the outlet to continue to be controlled by the z-wave controller
Answer:	One half of the outlet is a standard outlet. The other is a Z-Wave controlled outlet. The button is used mainly to include the Z-Wave outlet into the Z-Wave network during setup.
Question:	can anyone confirm the LED light color? Description says its blue but I saw a review indicating it was green. Anyone know what the peak wattage is
Answer:	LED is green.About the peak wattage, it says 15 Amp... It depends about the load type, If you are connecting a inductive motor there is a "factor power" to consider.. FP can be around .8, it means w=FP*Voltage*Amp. 0.8*120*15= 1440 watts... And for resistive load FP=1, so w=1*120*15= 1800 watts.If you are not sure what kind of load you have, try don't go more than 1300-1400 watts.Hope it helps :)
Question:	Is the top or bottom of this plug the zwave controlled plug
Answer:	Top plug is always on. Bottom plug is switched with z-wave control.

Product features

GoControl In-Wall Receptacle Outlet (Z-Wave)

The GoControl In-Wall Receptacle Outlet (Z-Wave) offers the power and function of a standard duplex receptacle but offers Z-Wave network control via the bottom outlet. The top outlet remains powered at all times, while whatever is plugged into the bottom receptacle can be turned on and off remotely. This outlet meets 2008 National Electric Code Compliance requirements and includes a child-protection mode, which you can access via your network's central control. The Receptacle Outlet also works as a repeater for your Z-Wave network, extending it up to an additional 130 feet.

What’s in the Box:

Control One Outlet via Z-Wave Network

The GoControl In-Wall Receptacle Outlet (Z-Wave) works in place of a standard duplex receptacle. The bottom outlet is controlled via your Z-Wave network to allow remote on/off control of devices connected to it. The top outlet remains powered at all times.

Includes Child-Protection Mode

You can use your wireless controller to put the Receptacle Outlet in child-protection mode. When that mode is activated, you will have to quickly press the button on the outlet three times to activate power for items plugged into the outlet.

Meets 2008 National Electric Code Compliance

The Receptacle Outlet is fully compliant with the 2008 NEC requirement that all new homes include tamper-resistant outlets. This outlet offers 120 volts of AC power with a maximum resistive load of 15 amps or 1,800 watts.

Outlet Acts as a Repeater for Your Z-Wave Network

For the Receptacle Outlet to work with your network, it must be within approximately 130 feet (via line of sight) from your Z-Wave Controller or the closest Z-Wave Repeater device. It also works as a repeater, extending your network an additional 130 feet via line of sight to reach other elements of your Z-Wave network that would otherwise be out of range of the hub or controller.

Compatible with All Other Z-Wave-Certified Products

Like all Z-Wave-certified products, the GoControl In-Wall Receptacle Outlet (Z-Wave) is compatible with other Z-Wave devices, including those made by other manufacturers. The GoControl family of Z-Wave products also includes switches, dimmers, outlets, thermostats, light bulbs and lighting retrofit kits and plug-in modules as well as security devices, including alert sounders, passive infrared motion detectors, and door/window sensors.

About Z-Wave Technology

Z-Wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. Thanks to the cross-manufacturer compatibility of Z-Wave products, it is simple to set up systems that include security, energy management, home entertainment, and appliances. Z-Wave products operate at the standard 908.42 MHz frequency and support network-wide inclusion. They are security system compatible.

From Nortek Security & Control

The #1 Provider of Z-Wave smart connected products worldwide*.

*Per The Z-Wave Alliance, 2015