13 best fluke voltmeters

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer, Rugged, durable design.
• Small lightweight design for one-handed use
• Automatic shutdown, Battery is easy to replace

User questions & answers

Question:	Forgive my ignorance, can I use this to measure the impedance of a guitar cabinet by contacting the test leads to the input jack
Answer:	Good question! No you cannot. These meters use DC current to test resistance. Transformers and voice coils rely on AC current, which is what introduces inductive capacitance and reactance in a coil, also known as impedance. To keep it simple, these meters will give you an inaccurate reading for impedance values. Find a meter used for audio electronics to test these values.
Question:	What batteries does this take
Answer:	2 batteries AAA
Question:	what is the listed NSN on the back
Answer:	there is no NSN for this model, it is a model designed for china but has been put on the "grey market". no formal support in the USA
Question:	Doe this come with test leads? Odd that they aren't shown or mentioned, but Amazon implies you ought to buy a set with this
Answer:	Its says they come with leads right on the box, my original purchase didnt so I returned it for credit and repurchased the item, the second one came with leads

Product description

The Fluke 87V MAX is a heavy duty True-RMS Digital Multimeter with IP67 rating and 4-meter drop proven. Built for customers whose job takes them to extreme environments: hot, cold, wet, dirty, up ladders, down a hole. This is the DMM that works where others can’t, plus all the trusted features from regular 87V.

• True-RMS accuracy with all functions of 87v and upgraded test leads.
• Fully waterproof and dustproof with IP67 rating and 4-meter drop proven. Built to take too harsh and extreme environments.
• Safety rated CAT III 1000 V, CAT IV 600 V meter to get you home safely from the job.
• Lifetime, backed by a brand you trust.

User questions & answers

Question:	What is the primary difference between the fluke 87v and the 87vMax
Answer:	Hi the Fluke 87 is measures capacitance in several ranges, the lowest Range being 10.00 nF with a 0.01 nF resolution, the accuracy of this reading is 1% plus several counts. The lowest resistance range is 600 Ohms with a 0.1 Ohm resolution. So to answer your questions No it will not work for your pico farad measurements but it will read resistance less than 500 Ohms. If you need better capacitance reading capabilities you way want to look for s good LCR meter.
Question:	is thier a difference in the fluke 87 and the 87-v
Answer:	Yes. It has a temperature mode and includes a bead probe. It may be worthwhile to pick up the thermocouple adapter as well.
Question:	how low can the meter read in picofareds? 1pf? 10pf? 100pf? not that low? Also the same in resistance
Answer:	Yes, the meter will shut off unless it has battery back up which I don't believe it has by the description, but the killowat counter should restore.
Question:	Can the 87-V measure temperature
Answer:	Depends on what you mean by "calibration." You can validate the accuracy of the meter under several typical conditions, and that may be all you really need. However, if you would like to know the accuracy at every conceivable combination of current, voltage, frequency and power factor, then this is probably a task you wouldn't want to do. Certainly, this device is not intended to be a lab-grade instrument (claimed accuracy is something like 1%), so there's no internal memory to hold compensation information to accurize the measurement data. Remember, to "calibrate" you will make adjustments to bring the device as close to perfect (against a standard) as you can, while to "validate" is simply to compare the performance (with a standard) and note the deviations.

Product features

Fluke 87V MAX

The Fluke 87V MAX True-rms Digital Multimeter is Fluke's most rugged digital multimeter ever: built for technicians whose job takes them anywhere: hot, cold, wet, dirty, up ladders, down a hole. This is the DMM that works where others can’t. A completely sealed, IP67 case and a removable molded holster has been drop tested to 4 meters.

Compatible with Fluke genuine accessories

The Fluke 87V MAX true-rms digital multimeter connects easily with Fluke genuine accessories, allowing you quickly and safely make current measurements using an accessory current clamp

Sealed against dirt, dust, water

With an IP67 sealed case, the Fluke 87V MAX is totally waterproof and dust proof. Make measurements anywhere your job takes you.

Works in extreme heat and cold

The Fluke 87V MAX true-rms digital multimeter give you and extended operating rage, from -20 degrees to +55 degrees C. It works even in places where you would rather not.

Survives drops and rough handling

Tested to survive a 4 meter drop (13 feet). The Fluke 87V MAX true-rms digital multimeter survives the real-world knock and drops that comes with your job.

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable Slim Reach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10 foot (3m) drop. The T5 meets safety category: UL, CSA, CE, and VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD displays. AC current accuracy: +/ 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

From the Manufacturer

The Fluke T5-600 600V Voltage Continuity and Current Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. The tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. The T5-600 automatically measures volts ac and volts dc with precise digital resolution and displays resistance to 1000Ω. The tester is rugged enough to withstand a 10-foot (3m) drop. The test leads accept Fluke accessory test clips. An auto off mode helps to conserve battery life. Optional holster attaches to a belt and neatly stows test leads. All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Automatically measures volts ac and volts dc with precise digital resolution
• Displays resistance to 1000Ω
• Easy and accurate OpenJaw current measurement
• Optional holster attaches to a belt and neatly stows test leads
• Can stay connected much longer than solenoid type tester

User questions & answers

Question:	Are you really sure about tenth of a volt? Manual says 1V resolution, and I own one of these and can't make it show tenths, DC or AC
Answer:	I don't currently have one of these. But, the spec sheet indicates .1A resolution on the current measuring (A) scale. All of the voltage scales have 1 V resolution.
Question:	Does the screen light up
Answer:	No it doesn't... That's my only issue
Question:	Is there any way to mount a TPAK hanger on a T5-1000? I would definitely purchase this if I could hang it off the side of a rack in a data center
Answer:	What a good convenient meter. Unfortunately the only way to hang it is if you improvise your own solution. Perhaps the accessory pouch available for the meter would be a good starting place.
Question:	does this read dc amps
Answer:	No, it does not read DC amps. AC amps only. I almost bought a T5-600 based on the misleading answers to this question. Got a 362 instead - the 362 measures DC amps (the T5 series doesn't), and the 362 has one decimal for voltage - the T5 doesn't.

Product features

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. Select volts, ohms, or current and the tester does the rest. OpenJaw current checks up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

Multifunctional

Test voltage, continuity and current all in one electrical tester. For safety and convenience the Fluke T5-600 comes built with auto select between AC and DC voltage.

OpenJaw current readings

Use the Fluke T5-600 OpenJaw to measure current without contact or breaking the circuit with a 12.9mm or 0.5 inches diameter wire.

Measure without breaking the circuit

Easily check amperage on appliances, motors, compressors and other equipment with the Fluke T5-600 without breaking the circuit.

Rugged and reliable

The go-to tool for electrical and HVAC troubleshooting the T5-600 is extremely rugged. Rugged enough to withstand a 10 ft (3 m) drop to make sure it lasts tough job site.

Product description

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 AMZN is ideally suited for current measurements up to 400 amp in tight cable compartments.

• Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure dc current
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

User questions & answers

Question:	I need to measure volts, amps and hertz to adjust my generator. Does this model measure hertz
Answer:	hello this model does not measure herzt.
Question:	if I, say, clamp a 120V AC lamp cord, will it measure amps correctly? What about a 220V pool pump motor? Thanks
Answer:	No. You have to use a AC line splitter tool found here on amazon. The line splitter plugs into the wall and then the lamp plugs into the line splitter. Then you can use your clamp meter to measure amps. this separates the neutral and the hot wire so you can meassure the amperage.
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	The 323 will measure DC amps as well as AC? What range will this tester handle in DC amps
Answer:	no just ac clamp around wire

Product features

Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter is a troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.

Continuity detection

Resistance measurement up to 4 kΩ with continuity detection.

True RMS measurements

True RMS AC voltage and current for accurate measurements on non-linear signals.

Ergonomic

Slim, ergonomic design.

Rugged, reliable, and safe

CAT IV 300V/CAT III 600 V safety rating.

Product description

At work, you need a durable, reliable and accurate digital multimeter. Fluke 15B + digital multimeter can meet or exceed your needs. Fluke 15B + easy to use, you only need one hand to operate, even when wearing gloves can also be flexible operation, can meet all your needs.And our bag is made of leather. It will be strong and Durable. 600 V Cat III safety design specifications 50% of the display range, bright white backlight Voltage, resistance, current, capacitance Input terminal of the AC and DC current measurement value of 10 A Diode test, data retention. Original FLUKE 15B+ Digital MultiMeter STANDARD ACCESSORIES 1. A Pair of Original Test leads 2. True FLUKE F15B+ meter 3. Free black carrying bag 4. Original User Manual 5. Batteries Note: Please click here to download English user manual: http://assets.fluke.com/manuals/151718__umeng0000.pdf

• Multiple functions with Auto / Manual ranges
• Large LCD display, 4,000 Counts update 3/sec
• Frequency:50Hz to 100Khz
• Temperature: -55C to 400C
• Dimension : 180 x 89 x 51.5mm

User questions & answers

Question:	this fluke, 15B says it uses 2 AA batteries, the fluke 15 B by amazon says it uses one 9 volt battery. whats up with this
Answer:	This is Original Fluke 15B+. We are direct seller from China.
Question:	Does this meter make a beep sound when testing for continuity
Answer:	Fluke designs in quality and safety first and features last. This is why you can't go wrong with a Fluke. With that said their lower end models are a bit Spartan. Like having a bargraph is really useful to notice quick flutter in what you're measuring ( since it updates much quicker than the number reading), also I would really try and get a meter with the min max feature. I find it indispensible especially if you don't own a scope. You can leave a meter in min max mode for hours and you can catch glitches that way.I find the 15b perfect for me being a computer engineer, but If you can stretch your budget get a 115 or one of the 170 series meters or even better one of the 80s, 87-V being the best. A Fluke multimeter is going to last you forever, meters don't really become outdated, I have an 8060A on my desk, it was built in 1985 and works like a charm. This is why I think it's worth spending a little extra for those few really useful features. The 15B is it's replacement after 30 + years.Also keep in mind if you're serious about electronics you want 2 meters. To measure multiple things at once and to double check and cross reference between them. Good Luck
Question:	This is original fluke or chinese
Answer:	The major advantages of the 87V Max are: Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster Waterproof, dustproof IP67 case for the most extreme work sites
Question:	Is the 15b+ a better choice than the
Answer:	"is thier a difference in the fluke 87 and the 87-v" Is THERE a difference BETWEEN the Fluke 87 and 87-V?

Product description

For the complete solution to HVAC troubleshooting the extra value packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.

• Fluke 116 digital multimeter features built-in thermometer for HVAC applications
• Fluke 116 digital multimeter features micro amps to test flame sensors
• Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
• Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage
• Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on nonlinear signals

User questions & answers

Question:	Will the Fluke 323 measure/capture maximum inrush amps
Answer:	No, the Fluke 323 doesn't have an Inrush function.
Question:	what is the category
Answer:	i did not purchase this Fluke kit, just the 116 meter. I believe the category would be Tools, with the sub category being Electrical Multimeters/Testing Equipment.
Question:	Does the magnetic strap attach to the 323 clamp on meter
Answer:	The magnetic strap is designed to be used with the 116 Multimeter, not the 323 Clamp Meter.
Question:	So this does everything the electrician's kit does + hvac options
Answer:	For the most part, yes. I actually bought this one because of the ability to diagnose flame sensor failures.

Product features

Fluke 116/323 HVAC Combo Kit - Includes Multimeter and Clamp Meter

The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general-purpose clamp meter.

The Fluke 116 measures resistance, continuity, frequency, and capacitance. It provides Min/Max/Average readings with elapsed time to record signal fluctuations and is CAT III 600 V safety rated.

True-rms measurements and compact ergonomics make the Fluke 323 Clamp Meter the best general-purpose meter for electricians. It is CAT IV 300 V/CAT III 600 V safety rated.

Fluke 116 HVAC Multimeter

The Fluke 116 was specifically designed for the HVAC professional. Measure voltage, resistance, continuity, frequency, and capacitance all in one tool!

Going beyond your standard multimeter functions, the Fluke 116 also measures temperature and microamps specifically for HVAC applications.

Fluke 323 Clamp Meter

The Fluke 323 features true RMS AC voltage and current for accurate measurements on non-linear signals.

Fluke 80BK-A

With the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer.

Measurement range: -40 to 260ºC

Accuracy: +/- 2.2 °C or 2% whichever is greater ((0 to 260 °C)

What's in the box?

TL175 Hard Point Test Lead Set.

ToolPak Magnetic Meter Hanging Strap.

Flexible Cuff Pipe Clamp

Thermocouple.

80BK Integrated Temperature Probe.

80AK-A Thermocouple Adapter.

C115 Deluxe Soft Carrying

Case with Shoulder Strap.

Test leads.

Soft case.

Product description

Product Information: Fluke 114 Compact Truer MS Digital Electrical Meter is designed by electricians and engineered by Fluke. The Compact truisms meter is for electrical troubleshooting and comes with a tool for go/no-go testing. Featuring AutoVolt: automatic ac/dc voltage selection, large white LED backlight to work in poorly lit areas, resistance and continuity and will prevent false readings caused by ghost voltage. Fluke Meter includes: Holster, Installed 9 V battery, Test leads, User manual. Additional Information: Manufacturer Specification Sheet (PDF File)Manufacturer User Manual (PDF File) Features:#149; AutoVolt: automatic ac/dc voltage selection#149; Large white LED backlight to work in poorly lit areas#149; Resistance and continuity#149; Min/Max/Average to record signal fluctuations#149; CAT III 600 V safety rated#149; Safety conformance: All inputs are protected to CE, IEN610101 CAT III 600V. UL, CSA, T#220;V listed and VDE Specifications:#149; Model Number: 114#149; Maximum voltage between any terminal and earth ground: 600 V#149; Surge protection: 6 kV peak per IEC 610101 600 VCAT III, Pollution Degree 2#149; Display Digital: 6,000 counts, updates 4 per second#149; Bar graph: 33 segments, updates 32 per second#149; Operating Temperature: 10 C to + 50 C#149; Storage Temperature: 40 C to + 60 C#149; Battery type: 9 volt Alkaline, NEDA 1604A/ IEC 6LR61#149; Battery Life: 400 hours typical, without backlight#149; DC millivolts Range: 600.0 mV#149; DC millivolts Resolution: 0.1 mV#149; DC millivolts Accuracy: #177; ([ of reading] + [counts]): 0.5 + 2#149; DC volts Range/Resolution: 6.000 V / 0.001 V, 60.00 V / 0.01 V, 600.00 V / 0.1 V#149; DC volts Accuracy: #177; ([ of reading] + [counts]): 0.5 + 2#149; Auto volts Range: 600.0 V#149; Auto volts Resolution: 0.1 V#149; Auto volts Accuracy: 2.0 + 3 (dc, 45 Hz to 500 Hz)4.0 + 3 (500 Hz to 1 kHz)#149; AC millivolts#185; truisms Range: 600.

From the Manufacturer

Fluke 114 Electrical TRMS Multimeter

• AutoVolt automatic ac/dc voltage selection
• Low input impedance helps prevent false readings due to ghost voltage
• Work in poorly lit areas with the Large white LED backlit display
• Resistance and continuity
• Record signal fluctuations using Min/Max/Average

User questions & answers

Question:	This product is manufactured in
Answer:	It says it was "Designed in USA" right on the back of the multimeter. But I think it was made in China. And my users manual says models 114, 115, and 117 are true-rms multimeters. It does not mention model 116, I don't know why. I really like this meter, it feels very well built and rugged. It measures LoZ, AC and DC Volts and Milivolts no Amps - I never have to worry if the leads are plugged into the correct jacks. Of course it measures Ohms and is lightening fast for continuity, I have compared it to an older Sunpro, BK Precision, and OTC and it is way faster. I added some TL175 silicone test leads capable of screw-on accessories and am very happy with it.
Question:	What is the resistance range on this and how accurate is it? I will be working with resistance less than 1 ohm mainly
Answer:	The lowest resistance range is 600.0 Ohms with a 0.1 Ohm Resolution. Working at less than 1 Ohm, I WOULD NOT recommend this meter, you want to look for a meter with milli-ohm capabilities/ranges. Even a meter with a 10 Ohm range will probably frustrate you

Product features

Fluke 114 Digital Multimeter with TRMS for electricians

Designed for easy one-hand operation, the Fluke 114 True RMS digital multimeter is the perfect troubleshooting tool for 'go/no go' testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so-called 'ghost voltage' and prevent false readings. The Fluke 114 displays True RMS voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments.

Product description

The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact meter for field service technicians and it is also the solution for a wide variety of electrical and electronic testing applications. It includes a 4mm silicone test lead set, a user manual and an installed 9V battery. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, test diodes frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. It has been independently tested for safe use in CAT III 600 Volt environments Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

Rugged and accurate enough for professional use, the Fluke 115 Multimeter for Field Service Technicians is ideal for a wide variety of electrical and electronic testing applications. Offering Min/Max/Average measurements with elapsed time to record signal fluctuations, this True-RMS meter provides easy one-handed operation in a compact package. For added convenience, it arrives ready to go with TL75 test leads, holster, and nine-volt battery.

Portable True-RMS Meter for Readings On the Go

Lightweight and compact, the Fluke 115 is easy to handle, making it the perfect choice for measuring components, voltages, and circuits on the go. Accurate, easy-to-use, and comfortable to carry in the palm of your hand, this multimeter does it all. Use it on the jobsite or around the house--wherever and whenever you need a general purpose, portable meter that gives clear, accurate readings.

Compatible with ToolPak, a convenient magnetic holder (sold separately), the Fluke 115 will give you even greater on-the-job portability.

Simple, Intuitive Operation Ensures Accuracy

Complete with a backlit 6,000-count digital display that features large digits for easy reading, the Fluke 115 is exceptionally user friendly. Its straightforward labeling clearly shows the function of each button, dial, and jack. And best of all, this True RMS meter gives you easy-to-understand readings. For example, a simple beep indicates when a wire or fuse is functioning properly--no beep means it's time to recheck your settings.

For further convenience, the Fluke 115 offers auto ranging, and it guards against common errors that could lead to inaccurate readings. For example, if you forget to turn the dial to 'A', and then feed current into the meter, or if you switch the dial to 'A', but forget to switch the lead to amps, this meter will alert you to the problem.

Professional Meter That's Versatile, Safe, and Accurate

Offering a DC ma range that can handle everything from 200ma to 1A, the Fluke 115 allows you to check continuity, frequency, capacitance, and diode test. It measures 20 A (30 seconds momentary, 10 A continuous) and even provides accurate measurements on non-linear loads.

Additionally, its operating temperature range of -10 degrees to +60 degrees Celsius combines with durable casing for maximum resistance to wear and tear. An added bonus, overload protection ensures uninterrupted operation and long life.

CAT III 600-volt safety rated, the Fluke 115 is UL, CSA, TUV, and VDE listed, and all of its inputs are protected to CE, IEN61010-1 CAT III 600V.

What's in the Box

Multimeter; holster; nine-volt battery (installed); 4mm silicone test lead set; and user manual.

From the Manufacturer

The FLU115 is the solution for a wide variety of electrical and electronic testing applications. Features Minimum /Maximum /Average with elapsed time to record signal fluctuations. This True-RMS meter provides easy one-handed operation in a compact package. Includes TL75 Test leads, holster, user's manual and 9-volt battery (installed).

• True-rms for accurate measurements on non-linear loads
• safety rated
• Large white LED Backlight to work in poorly lit areas
• Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
• Check continuity, frequency, capacitance and diode test
• Measures 20 A (30 seconds momentary; 10 A continuous)
• True-RMS for accurate measurements on non-linear loads

User questions & answers

Question:	Would this be good for automotive work
Answer:	Quite good.
Question:	Is it made in the USA
Answer:	No teerhe 100 series is designed in USA built in China. (To fluke specs) still high quality if you want a USA built model check out the 87-5 or 279 you pay for it though mine with nist cert was 600 bucks
Question:	Is that cables included if I buy in this Fluke 115 true RMS multimeter
Answer:	Fluke TL75 test leads are included.
Question:	Would anyone recommend this for Computer repairs and checking wires in a Computer? (Future PC Technician starting out and shopping for tools
Answer:	This multimeter is not good for computer repair. While it is accurate it doesn't have milli or microamps, which is very necessary for troubleshooting computers. You would need something like the Fluke 177 (a little more than 100 dollars more) and has microamps, or you could get something like a B&K Precision 2708B, which has milli and microamps. Also the B&K Precision is less than 100 dollars, so I would say for a budget meter it's the best considering its ability. I've watched reviews on dozens of multimeters, and the B&K Precision 2708B is pretty quick and quite accurate, especially at its price point.

Product features

Fluke 115 Digital Multimeter

With its simple operation, compact design, and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity, and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V environments.

General multimeter capabilities

When you need to eliminate false or ghost voltages or perform continuity, connection or basic wiring checks use the Fluke 115. Other measurement capabilities include includes resistance, frequency and capacitance measurement capabilities.

Safe and reliable

Fluke has been a trusted test tool partner since 1948, helping you and your team work safely with tools that meet or exceed the safety standards of the environments you work in. The Fluke 115 multimeter is independently tested for safe use in CAT III 600V environments.

Ease of use

The 115 digital multimeter offers the users one-handed operation and a backlit display.

The large, easy-to-read digits offer a 6000-count resolution.

What's in the box?

Fluke 115 Digital Multimeter

Holster.

Installed 9V battery.

4 mm silicone test lead set.

User manual.

Product description

The t6 600 with field sensor technology lets you measure AC voltage and AC current with or without Test leads. Its compact design lets you access tight spaces that were previously not possible. With field sense selected, slide the open jaw around a cable and measure up to 200 and 600 V without breaking the circuit. The backlight display makes the values easy to read. Rated to 600V cat III and with resistance measuring up to 1000 ω, the T6 is the perfect front line tool for basic troubleshooting.

• Measure voltage with or without test leads
• Be safer: Measure voltage to 600V through the open fork, without test leads
• Be faster: Not need to open covers or remove wire nuts simultaneously measure voltage and current
• Be everywhere: 17.8 millimeter open fork is widest in the industry; Measure up to 200 A on 4/0 wires (120 millimeter2)
• Field Sense technology for AC voltage, current and frequency measurement without making electrical contact to live voltage. Jaw opening: 0.7 inch

User questions & answers

Question:	can you attach a magnet on the back like other Fluke meters
Answer:	The amp function of the T5-1000 and T6-1000 operate the same way.
Question:	Some of the pics shown, the black clip is shown connected to ground, the meter shows ac volts and current. in other pics only ac volts is shown why
Answer:	Yes, the replacement test lead set is the T5-RLS.
Question:	Does the "clamp-on" amp reading function work like in the T5-1000 (reliably, and without needing a ground
Answer:	FLUKE "15B+" uses AA according to FLUKE.com here is the info http://www.fluke.com/fluke/vnen/digital-multimeters/general-purpose-multimeters/fluke-15b+.htm?pid=78680
Question:	can you replace the test leads
Answer:	Yes, when set to resistance and selected to continuity it will beep when shorted.

Product features

Fluke T6 Electrical Testers with FieldSense technology

Measure voltage up to 600 V ac through the open fork, without test lead contact to live voltage. Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A. It will change your job. Safer. Faster. Easier.

The T6 Electrical Tester

Thanks to the new FieldSense technology, the T6 makes work safer as you can measure voltage up to 600 V ac through its open fork. Having the capability to measure voltage and current at the same time, together with eliminating the need to open covers or remove wire nuts, allows you to be faster and more efficient when taking measurements. In addition, the open fork is the widest available in the industry and can measure wires up to AWG 4/0 (120 mm2) carrying as much as 200 A.

What type of applications?

Commercial and light industrial electricians can use T6 Electrical Testers for basic troubleshooting, verifying voltage and continuity values as well as testing individual circuits while quickly checking current and voltage measurements without test leads. These devices easily fit in your pocket, making them easy to access on the front-line for electricians of all industries.

Why use the T6 Electrical Tester?

Typically, electricians encounter junction boxes crowded with wires, so finding the right connection point poses a challenge. With the T6-600 or T6-1000 you take measurements by sliding a single conducting wire into the open fork.

T6 Electrical Testers go beyond simple detection. They actually measure ac voltage, current and frequency without test leads. With the use of the provided test leads, the tools are also able to measure ac/dc voltage, resistance and continuity. The T6 testers use proprietary FieldSense technology, which makes measuring the voltage source safer for the electrician or technician performing the test.

Fieldsense Technology

FieldSense technology is truly a breakthrough in how voltage is measured. While the technology in the T5 detects a magnetic field to derive an ac current measurement, the new technology detects an electrical field. Fluke Research and Development teams first developed the open-fork voltage sensing technology, which involves transducing and calculating a known signal to derive measurements for the source voltage.

Fluke’s New T6-600 Electrical Tester – Measure voltage without test leads

Now measure voltage the same way you measure current, without test lead contact to live voltage.

FieldSense technology lets you slide the open fork over a conductor and see the voltage level.

Be Safer: Measure voltage to 600 V ac through the open fork, without test leads.

Be Faster: No need to open covers or remove wire nuts.

Be More Efficient: Simultaneously measure voltage and current.

Be Everywhere: 17.8 mm open fork is widest in the industry; measure up to 200 A on 4/0 wires (120 mm2).

Product description

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 323 AMZN is ideally suited for current measurements up to 400 a in tight cable compartments.

• Digital clamp meter measures ac current to 400 amp, ac and dc voltage to 600v, and resistance to 4 kilohms
• True RMS sensing meter provides accurate readings when measuring linear or non linear loads, regardless of waveform
• Jaw opening measures current in a conductor upto 30 millimeter without touching or interrupting the circuit
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
• Slim, ergonomic design
• Large, easy to read backlight display

User questions & answers

Question:	Does the meter come with a magnet on the back ? If not, how can I have the meter stay on a metal surface instead holding the meter with my hand
Answer:	No magnet. Leads are long to be able to set it somewhere while measuring, or if there is something to clamp the meter to, you can go that route. Maybe you can find a magnetic strap (with Velcro) to strap around the meter.
Question:	Can the temp prob be calibrated by the owner? Can it read negative numbers? i.e. Freezer temps
Answer:	The 325 will only go down to 14 degrees F and the meter lacks an offset adjustment. If the customer has access to a metrology lab we do publish the calibration procedures. Probes would typically be verified by a drywell calibrator.
Question:	How is the temperature taken? Contact or infrared
Answer:	Fluke 324 takes temperature by contact, it uses a thermocouple.
Question:	Does the Fluke 324 measure DC Amps via the clamp
Answer:	I am posting for other readers, One person who answered stated you can not read DC current with a clamp, this meter is AC current only but they do make clamps that can measure DC current, they are considerably more expensive, I own one and it I have used it on 12Volt Dc systems (cars) and it works pretty good.

Product features

Fluke 324 True RMS Clamp Meter

True RMS measurements and optimized ergonomics make the 324 Plus Clamp Meters the best troubleshooting tools for commercial and residential electricians. The 324 Plus is designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. This small and rugged clamp meter is ideally suited for current measurements up to 400 A in tight cable compartments. The Fluke 324 plus model also includes temperature and capacitance measurement capabilities.

Product description

Designed for basic electrical tests, the Fluke 101 offers reliable measurements for electricians and heating/AC techs. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come.

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design

User questions & answers

Question:	Does anything come with it
Answer:	TL175 Test Leads are included.
Question:	Can you add the magnetic strap to this
Answer:	The TPAK would work with the 101.
Question:	Is it a backlit screen
Answer:	The 101 does not have a backlight.
Question:	Does it make sound with continuity
Answer:	I just checked , mine doesn’t any sound .

Product features

Fluke 101 Digital Multimeter

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

Product description

The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the New C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT.

• The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
• The 117 multimeter features true RMS for accurate measurements on non-linear loads
• The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
• The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on nonlinear signals
• The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage

User questions & answers

Question:	Looks like the 117 includes a non-contact voltage detector. does that mean i don't need a separate non-voltage detector, i.e. 2ac av tester
Answer:	It will sense AC voltage with no contact if within range.
Question:	Why is the 116 better for hvac guys than the
Answer:	The only major differences between the 116 and 117 are thermometer and non-contact voltage detection features, the 116 having the thermometer but not non-contact. I would make a conclusion that HVAC technicians would have more use for a thermometer on the job, where electricians have more use for non-contact.
Question:	Made in the usa or china
Answer:	Mine says designed in USA. I doesn't say exactly where it was made. It is one of the best multimeters you can buy anywhere, regardless of where it was assembled.
Question:	Does this kit come with test leads & the magnetic meter hanging strap
Answer:	Hello,Thank you for your message. The Fluke117/323 comes with the follow: 117 TRMS Digital Multimeter w/ Non-Contact voltage detection 323 AC/DC True-RMS Clamp Meter TPAK ToolPak Magnetic Meter hanging Strap C115 Deluxe carrying case with shoulder strap TL175 TwistGuard Test LeadsIf you have any further questions feel free to contact us. Thank you for visiting our store front.Regards,Customer Service

Product features

Fluke 117 / 323 - Electrician’s Combo Kit

The Fluke 117/323 Electricians Multimeter Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

The Fluke 323 True-rms Clamp Meter is suited for current measurements up to 400 A in a tight cable compartments.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Electrical Maintenance troubleshooting

Eliminate false or 'ghost' voltages or perform continuity, connection or basic wiring checks with the Fluke 177.

Measurement capability

The Fluke 323 measures resistance up to 4 kΩ with continuity detection.

Compact design

The Fluke 323's compact design is suitable for one hand operation and tight cable compartments.