12 best fluke networks multimeters

Product description

The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the New C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT.

• The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
• The 117 multimeter features true RMS for accurate measurements on non-linear loads
• The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
• The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on nonlinear signals
• The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage

User questions & answers

Question:	Looks like the 117 includes a non-contact voltage detector. does that mean i don't need a separate non-voltage detector, i.e. 2ac av tester
Answer:	It will sense AC voltage with no contact if within range.
Question:	Why is the 116 better for hvac guys than the
Answer:	The only major differences between the 116 and 117 are thermometer and non-contact voltage detection features, the 116 having the thermometer but not non-contact. I would make a conclusion that HVAC technicians would have more use for a thermometer on the job, where electricians have more use for non-contact.
Question:	Made in the usa or china
Answer:	Mine says designed in USA. I doesn't say exactly where it was made. It is one of the best multimeters you can buy anywhere, regardless of where it was assembled.
Question:	Does this kit come with test leads & the magnetic meter hanging strap
Answer:	Hello,Thank you for your message. The Fluke117/323 comes with the follow: 117 TRMS Digital Multimeter w/ Non-Contact voltage detection 323 AC/DC True-RMS Clamp Meter TPAK ToolPak Magnetic Meter hanging Strap C115 Deluxe carrying case with shoulder strap TL175 TwistGuard Test LeadsIf you have any further questions feel free to contact us. Thank you for visiting our store front.Regards,Customer Service

Product features

Fluke 117 / 323 - Electrician’s Combo Kit

The Fluke 117/323 Electricians Multimeter Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

The Fluke 323 True-rms Clamp Meter is suited for current measurements up to 400 A in a tight cable compartments.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Electrical Maintenance troubleshooting

Eliminate false or 'ghost' voltages or perform continuity, connection or basic wiring checks with the Fluke 177.

Measurement capability

The Fluke 323 measures resistance up to 4 kΩ with continuity detection.

Compact design

The Fluke 323's compact design is suitable for one hand operation and tight cable compartments.

Product description

For the complete solution to HVAC troubleshooting the extra value packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.

• Fluke 116 digital multimeter features built-in thermometer for HVAC applications
• Fluke 116 digital multimeter features micro amps to test flame sensors
• Fluke 116 digital multimeter low input impedance helps prevent false readings due to ghost voltage
• Fluke 323 true RMS clamp meter measures 400 A AC current and 600 VAC and DC voltage
• Fluke 323 true rms clamp meter features true RMS AC voltage and current for accurate measurements on nonlinear signals

User questions & answers

Question:	Will the Fluke 323 measure/capture maximum inrush amps
Answer:	No, the Fluke 323 doesn't have an Inrush function.
Question:	what is the category
Answer:	i did not purchase this Fluke kit, just the 116 meter. I believe the category would be Tools, with the sub category being Electrical Multimeters/Testing Equipment.
Question:	Does the magnetic strap attach to the 323 clamp on meter
Answer:	The magnetic strap is designed to be used with the 116 Multimeter, not the 323 Clamp Meter.
Question:	So this does everything the electrician's kit does + hvac options
Answer:	For the most part, yes. I actually bought this one because of the ability to diagnose flame sensor failures.

Product features

Fluke 116/323 HVAC Combo Kit - Includes Multimeter and Clamp Meter

The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general-purpose clamp meter.

The Fluke 116 measures resistance, continuity, frequency, and capacitance. It provides Min/Max/Average readings with elapsed time to record signal fluctuations and is CAT III 600 V safety rated.

True-rms measurements and compact ergonomics make the Fluke 323 Clamp Meter the best general-purpose meter for electricians. It is CAT IV 300 V/CAT III 600 V safety rated.

Fluke 116 HVAC Multimeter

The Fluke 116 was specifically designed for the HVAC professional. Measure voltage, resistance, continuity, frequency, and capacitance all in one tool!

Going beyond your standard multimeter functions, the Fluke 116 also measures temperature and microamps specifically for HVAC applications.

Fluke 323 Clamp Meter

The Fluke 323 features true RMS AC voltage and current for accurate measurements on non-linear signals.

Fluke 80BK-A

With the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer.

Measurement range: -40 to 260ºC

Accuracy: +/- 2.2 °C or 2% whichever is greater ((0 to 260 °C)

What's in the box?

TL175 Hard Point Test Lead Set.

ToolPak Magnetic Meter Hanging Strap.

Flexible Cuff Pipe Clamp

Thermocouple.

80BK Integrated Temperature Probe.

80AK-A Thermocouple Adapter.

C115 Deluxe Soft Carrying

Case with Shoulder Strap.

Test leads.

Soft case.

Product description

Flex clamp meters are designed with a flexible coil clamp for reaching into difficult as well as tight areas beyond reach. The clamp wraps around bars and wire bundles.

• Wireless module with true-RMS current meter and current probe measures up to 2,500 amps AC and can wirelessly relay measurements to Fluke Connect enabled master units
• Works as a standalone meter or with the following (sold separately): Fluke 3000 FC DMM, Fluke Ti200/300/400 Infrared Cameras, PC via a Fluke pc3000 Adapter, and Fluke Connect Mobile app
• Logging function can record and save up to 65,000 readings
• Measure up to 2500 A AC
• Use as a standalone meter or as part of the system

User questions & answers

Question:	If the meter is in an area that has wifi, can i see live readings on my phone miles away
Answer:	I can never get it to read 0 either. I usually have much more amperage than the 2 or 3 phantom amps. Have you tried using he i410 with a regular DVM?
Question:	Hello do you need WiFi to use this meter with my Samsung s
Answer:	Hi. The product is designed in the US and was assembled in China.
Question:	Does this clamp come with nist-traceable calibration
Answer:	Hi. It has the 1.8 GHz Quad Core Processor.
Question:	I have the i410, and i200 clamps, It only reads if both l & N are in the clamp, and its way off? What am I doing wrong
Answer:	You do NOT. It's hidden how to access the router page directly without a phone, but you can do it. When you hit the IP address of the router, it will have a page to download the apps. Don't click the app buttons, but the picture of the phone instead. This will then take you to the normal setup page without the apps. Found this out during a call with tech support.

Product description

9 Piece FC Series Wireless Multimeter Kit. Wireless general maintenance system kit with a digital multimeter, voltage modules, and flexible current module and probe for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequency.

• Wireless general maintenance system kit with a digital multimeter, voltage modules, and flexible current module and probe for measuring AC and DC voltage and current, continuity, resistance, diode test, capacitance, and frequency
• Modules can be connected to a test point, and results can be viewed up to 20 meters away on the multimeter
• Kit includes a 3000 FC series wireless multimeter; V3000 AC and V3001 DC voltage modules; A3001 FC wireless iFlex AC current module; TL224, TL222, and TL175 test leads; AC285, AC220, and AC175 alligator clips; iFlex i2500-10 flexible current probe; and a magnetic hanging strap
• The Fluke 3000 FC Series Wireless Multimeter with the Fluke Connect app has all the essentials for convenient test and measurement troubleshooting

User questions & answers

Question:	What are the differences between this unit, the 3000fc, and the Fluke 279 now that the 279 can connect to transfer data to your smartphone wirelessly
Answer:	No the included software will not install on Windows 10 (as of 7-18-16).
Question:	Any plans to correct the firmware issue that shuts off the meter and stops the logging function
Answer:	No, the meter uses Bluetooth Low Energy, and does not connect to an access point. Range is about 30' or so if the meter isn't inside an electrical box (about 6' or so is what I get out of it when I put the meter inside a panel and put the cover back on)
Question:	Will the FLK-PC3000 FC work with my Fluke 89 series
Answer:	The FC series uses blue tooth
Question:	The big new question is will it work on windows
Answer:	Hello, that meter does not come standard with a Certificate of Calibration. If you require that documentation you can either tell the distributor of that requirement during the ordering process and there is an added cost for that requirement. If you already have the instrument contact the Fluke service department at 1-888-993-5853 and send the instrument back to them.

Product features

Fluke 3000 FC General Maintenance System

The Fluke FC Wireless General Maintenance System lets you work on electrical panels faster, safer, easier.

Connect the FC Wireless iFlex AC Current Module to your test point, and view the results up to 20 meters away on the FC Wireless Digital Multimeter. Or connect the FC Wireless AC Voltage Module and view both voltage and current measurements simultaneously.

You’ll save time, with less run-around collecting multiple measurements. Use multiple modules for measurements on three-phase systems, as a stand-alone measurement tool or combine with other Fluke Connect modules as a system for multiple measurements.

From short distances, you can even view readings from modules through closed electrical panels. Plus no more writing down data as the Fluke Connect remote modules capture up to 65,000 sets of time stamped min/max/avg readings, using the optional PC adapter. Fluke Connect wireless test tools also offer increased safety by letting you view readings in a separate location from the test point.

Now you can take readings on moving machinery, with only the measurement module in harm’s way.

Work safely near electrical panels while wearing less PPE

The Fluke 3000 FC True-RMS Wireless Multimeter and Fluke Connect wireless test tools put tools, not your body, near live electrical panels. It's simple. Just de-energize the cabinet, open the panel while wearing PPE and connect the remote modules, whether they are voltage modules, current clamps, flexible current loops or thermometers. Then read the results on the 3000 FC Wireless Multimeter from a safe distance. You can display the meter measurement, plus readings from up to 3 wireless modules, while reducing the risk of arc flash by separating yourself from hazardous measurement situations.

Better still, the Fluke 3000 FC Series Wireless Multimeter can send measurement data to your smartphone, so you can save and share measurements from the field with your team anytime, from anywhere.

Fluke Connect Enabled

Fluke Connect test tools communicate with the new Fluke Connect free mobile app on your Android or iOS smart device, allowing you to share live measurements, monitor readings from safe distances, and get your job done easier than ever before. The wireless digital multimeter functions as the mobile hub, displaying readings from up to three meter modules tools simultaneously from up to 20 meters away. The Fluke Connect meters also give you the flexibility to build your wireless test tool system how you want when you want.

What's in the box?

Fluke 3000 FC Series Wireless Multimeter.

Fluke v3000 Voltage Module.

Fluke v3001 Voltage Module.

Fluke a3001 FC Wireless iFlex AC Current Module.

TL224 Test Leads.

TL222 Test Leads.

TL175 Test Leads.

AC285 Alligator Clips.

AC220 Alligator Clips.

AC175 Alligator Clips.

iFlex i2500-10 Flexible Current Probe.

Magnetic hanging strap.

Use the Fluke 3000FC for commercial and industrial electrical troublshooting

Work faster and safer with Fluke Connect (FC) wireless test tools:

The 3000 FC wireless multimeter and associated wireless modules allows users to work safer, log time stamped readings, be in two places at once and see multiple readings simultaneously to solve complex electrical problems faster.

Build the system as your needs grow: Start with the multimeter and expand your measurement and troubleshooting capabilities by adding additional meters to meet your specific applications including three-phase load studies with iFlex or voltage monitoring.

Product description

Fluke has combined the Rugged 179 true-rms Multimeter with a built-in thermometer and the 323 AC Current Clamp. The combo pack provides you the functionality needed to effectively and quickly identify and troubleshoot most electrical and electromechanical problems.

• Industrial thermometer combo kit
• Full featured DMM with advanced electronic troubleshooting functions plus probes

User questions & answers

Question:	Does this come with a case
Answer:	I don't know. Contact Fluke!!!
Question:	Is it Made In USA with USA Made Parts
Answer:	No ... Only FC series instruments are equipped to communicate wirelessly.

Product features

Fluke 179 IMSK Industrial Multimeter Service Kit

This kit combines the Fluke 179 True-RMS DMM and the Fluke 323 True-RMS clamp meter. They are rugged, reliable and accurate, as well as extremely easy to operate.

The Fluke 179 is the preferred solution for professional technicians. It includes the features you need to troubleshoot and repair electrical and electronic systems. The Fluke 323 clamp meter is designed to perform in the toughest environments and provide noise-free, reliable results, to confidently diagnose problems almost anywhere.

Fluke 179 True-RMS Digital Multimeter Increases Productivity

Delivers accurate true-rms AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements. Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording.

Fluke 179 True-RMS Digital Multimeter Features

Includes a built-in thermometer to measure temperature without having to carry a separate instrument

Fluke 323 True-RMS Clamp Meter Features

The 323-clamp meter provides true-rms measurements, optimized ergonomics, and large display for efficient troubleshooting. Designed to perform in the toughest environments and provide noise-free, reliable results, to diagnose problems almost anywhere.

Fluke 323 True-RMS Clamp Meter for Multiple Measurements Types

Rugged, reliable basic true-rms clamp meter for measuring current up to 400 A. Measures AC current to 400 A. Measures AC voltage and DC voltage to 600 V. Provides true-rms AC voltage and current for accurate measurements on non-linear signals. Measures resistance to 4 kΩ with continuity detection.

Product description

Find little problems before they become big ones. The industrial meter for demanding users. New diagnostic functionality for maximizing productivity in the plant. The new 289 is the next generation high performance industrial logging Multimeter designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment.

• Auto and manual ranging, datalogging digital multimeter measures voltage, current, resistance, frequency, capacitance, temperature, conductance, pulse width, and duty cycle
• True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or nonsinusoidal waveform
• Datalogging features include minimum, maximum, and average, on screen graphing, real time clock, data hold, and data export to a computer
• Backlit LCD displays multiple measurements simultaneously and plots measurements on a single line to detect signal anomalies over time
• Specifications include European Conformity (CE) marking, UL, CSA, IEC safety standard 61010 and is certified for Category I installations up to 1000V and Category II installations up to 300V, IEC/EN 61010 1 2nd edition for 1 meter drop
• Logging features designed for unattended monitoring
• On board help screens for measurement functions
• Multi lingual interface

User questions & answers

Question:	Does the logging software work on Linux
Answer:	When recording the sampling rate is 50ms sampling. The meter stores the min, max and average for the period of recording the data which is user configurable.
Question:	Does this unit have the latest firmware v 1.41? Note: per the Fluke website v1.16 cannot be upgraded to
Answer:	No it does not come with a case. They can be purchased separately.
Question:	The Models 287/289 were introduced almost 12 years ago. Are there no comparable models available using current processor & display technology
Answer:	"I just spoke with "Jim" at Fluke. He said yes, the '170 series' (175/177/179) are made in the USA, as are the 87V and (IIRC) the 83V and 88V. As for "USA made parts" I'm not sure. The '110 series' are all made in China.I'm trying to figure out whether the 179/EDA2 sold here on Amazon includes the magnetic hanger. It's shown in one photo but not another, and it is shown as a "Frequently bought together" item, which indicates it is not included. ALL other authorized Fluke dealers do include it, for the same price. I plan to call Fluke about that and will ask about the origin of the parts."
Question:	How many samples/sec on recording mode
Answer:	The 3000FC meter can connect and display up to 3 Fluke Connect module live display values on its own display. It can also share it's live display with a phone running the Fluke Connect application. The 279 can take and store thermal images, but can also upload the current active displayed thermal image to a phone. It cannot transfer stored images to a phone. You need to download them through USB to get the stored images.

Product features

Fluke 287 True-rms Electronics Logging Multimeter with TrendCapture

The Fluke 287 True-rms Electronics Logging Multimeter packs more accuracy and convenience into a handheld multimeter than ever before. Designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment, this high-performance multimeter quickly documents design performance and graphically displays what happened, helping minimize downtime.

Work safer, smarter and faster with Fluke Connect enabled wireless test tools

With the Fluke Connect app and enabled tools you can view multiple measurements of energized components from up to 20 feet away from the test point. Set up multiple modules and then step out of the hazard zone and remotely view all the measurements simultaneously on a smart phone. By keeping your distance from energized components you can increase your personal safety and efficiently.

Reduce maintenance time and increase uptime

View different measurements—thermal, mechanical, electrical and vibration—from the same piece of equipment at the same time. Seeing the interactions among multiple measurement points can help you spot problems quicker. You can automatically record measurements and upload them to a PC for further analysis and reporting, and save to secure cloud storage. From there, authorized users can easily access baseline data in the field to quickly identify anomalies and resolve problems.

Collaborate with colleagues without leaving the plant floor

Onsite techs can share measurements, graphs and even thermal images with team members located anywhere via a ShareLive video call. Everyone on the call can see the same live data and images on their smart phones. Managers can see all the information they need to issue a work order so technicians can move forward with repairs without leaving the field. That saves extra trips back and forth to the office and helps ensure problems are resolved faster with less downtime.

Improve Safety

View live measurements of energized electrical panels or operating mechanical equipment from a safer distance. May help reduce PPE requirements.

Increase Productivity

Make short work of routine maintenance and troubleshooting. Log and monitor live measurements from multiple test points at the same time.

Enhance Collaboration

Share live measurements and thermal images with team members at other locations to get troubleshooting help and quick work order approvals.

Product description

Full featured DMM with advanced electronic troubleshooting functions plus probes and hooks all packed in a sleek, durable carrying case. Kit Includes: Fluke 179 true RMS digital multimeter with backlight, Fluke TL224 silicone test leads, Fluke Tl910 electronic test probes with replacement tips, Fluke AC280 heavy duty hook clips, Fluke 80bk a integrated temperature probe, Fluke C35 durable carrying case, The Fluke 179 has more measurement functions, conformance to the latest safety standards, and a much larger display that's easier to view.

• 6 piece industrial thermometer combo kit
• Full featured DMM with advanced electronic troubleshooting functions plus probes

User questions & answers

Question:	does this have a calibration sticker
Answer:	The box has a sticker that reads, "Country of Origin: United States". The meter itself says, "Assembled in the USA of US and Foreign Components".
Question:	Is this a good choice for the homeowner and do it yourself auto mechanic? Or is it too complicated and advanced
Answer:	No, FlukeView Forms only runs on Windows.
Question:	Does this kit include the TPAK meter hanging kit? as is it not mentuioned in the description and shown in the picture
Answer:	My purchase date was 2016 w/ SN 36xxxxxx S/W V 1.16 / V0.88 Fluke 287 multi-meters beginning with serial number 42700001 and Fluke 289 multi-meters beginning with serial number 42830001 ship with firmware version 1.41. Older versions of the Fluke 287 or 289 with lower serial numbers cannot be upgraded to version 1.41 I would check with the Vendor to confirm serial number before purchase. Sequence is Serial Number is the second item down, firmware is the third item down. So, confirm serial number and firmware.
Question:	Do Fluke 179 is made in USA or China
Answer:	Speed costs money, how fast do you want to go? Fluke 190-062 ScopeMeter® Test Tool

Product features

Fluke 179 Digital Multimeter and EDA2 Accessories Kit

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements.

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work.

The Right Measurement Functions

The 179 is a true-rms multimeter, providing accurate measurements up to:

• 1000 V ac/dc;
• 10 A ac/dc;
• Resistance to 50 MΩ;
• Capacitance to 10,000 μF,
• Frequency to 100 kHz;
• Temperature from -40 °C to 400 °C (-40 °F to 752 °F).

Additional Features

The meter offers both manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording.

The large backlit digital display is easy to in dark areas and includes an analog bar graph to view trending or unstable signals.

What's in the Box

• Fluke 179 Multimeter Installed 9V battery 80BK-A Integrated DMM Temperature Probe
• AC280 SureGrip Hook Clips
• TL910 Electronic Test Probes
• TL224 SureGrip Insulated Test Leads
• TPAK ToolPak Magnetic Meter Hanger
• Soft carry case

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

The Fluke 113 True-RMS Utility Multimeter is a digital multimeter (also known as a multitester) that measures AC/DC voltage to 600V, resistance to 60 kiloohms, and capacitance to 9,999 microfarads. The meter has a diode check for testing general-purpose germanium, silicon, and power diodes, and a continuity beeper which provides audible detection of resistance by turning on at less than 25 ohms and off at 250 ohms. It is also able to simultaneously check for voltage and continuity. This true RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or non-sinusoidal waveform and has both manual- and auto-ranging capabilities for user flexibility. A Max/Min function records signal fluctuations and a hold function freezes measurements on the display. The 6000-count resolution, 3-1/2 digit digital display is backlit for readability in low-light conditions. The meter is safety rated for Category III to 600V and Category IV to 300V. It uses a 9V battery (installed) with a battery life of approximately 300 hours without backlight and has a sleep mode to maximize battery life. The meter measures 6.58 x 3.35 x 1.81 inches (H x W x D) and weighs 13 oz. /404 g. (H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.) This meter includes a holster with built-in probe holders for convenient storage. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electro technical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications.

• Digital multimeter measures AC/DC voltage, resistance, and capacitance and performs continuity and diode tests
• True RMS meter provides accurate readings when measuring linear or nonlinear loads where the current or voltage has a sinusoidal or non-sinusoidal waveform
• Simultaneously checks for voltage and continuity
• Manual and auto ranging modes for user flexibility
• Safety rated for Category III to 600Volts and Category IV to 300 Volts

User questions & answers

Question:	Does meter includes Calibration Accuracy Data documentation
Answer:	Yes, the Fluke 113 has a stand on the back.
Question:	Is this made in China
Answer:	to calibrate meters (when that option is available), its an additional cost of $100-150
Question:	Does this unit measure dc voltage in decimals? (i.e., 12.7v or 11.9v
Answer:	This is a great choice for advanced DIY. Compared to less expensive alternatives you get superior accuracy, auto ranging, and some really nice features like continuity, and frequency.I use a! Fluke daily at work and chose the 174 as a nice unit for the house. Like you at home. I dabble and have used it for HVAC, car repair, and some bench work with arduino. At work I use a heavier model better suited for big voltages and 20+ amps. It really depends on your needsSorry, too much info. Yes this is a great choice for you and it is pretty simple,
Question:	does this have the built in stand on the back that flips out
Answer:	I just spoke with Fluke and they said that the 179/EDA2 _does_ include the TPAK hanging kit.I then called Amazon to confirm. Initially, the CSR said that NO, it is not included -- based on both the top photo and the "frequently bought together" listing showing the TPAK as a ~$37 add-on item. Then she contacted Fluke. Fluke confirmed that the TPAK strap is included. I will order and update this answer.EDIT: I received the meter today and it DOES include the TPAK magnetic hanging strap. I also includes a few replacement tips for the 'precision electronic probe'. 5 assorted sizes, all 0.040" diameter, for TL910. I don't recall them being shown or mentioned in the listing. Nice surprise!

Product features

Fluke 113 Digital Multimeter

The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.

Product description

The Fluke Networks MS2-100 MicroScanner2 Cable Verifier performs continuity tests on all wires in a few seconds and displays results graphically so you can see opens, shorts, and cross wires. It also reports which end of the cable has a problem and reports the distance to an open connection within the cable. Cable failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired.

• Copper cable verifier kit for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments
• Includes MicroScanner2 cable verifier with detachable wire map adapter, IntelliTone 200 Digital Probe, patch cords, remote IDs, alligator clips, user guide, AA and 9V alkaline battery, accessory pouch, duffel bag, 1 year warranty
• Oversized backlit LCD screen displays clear results in bright light or complete dark with intuititive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoE
• Cable tests include length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 Ω, 50 Ω, 93 Ω cables, PoE Detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problems
• Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning

User questions & answers

Question:	Will this tell me which end of a run is bad " keystone and rj45clip" as well as test the cable run
Answer:	The Scanner generates the tone and YES, I highly recommend this product. If you only need a tone generator you can use any el-cheapo tone generator and the 200 Probe will pick it up - you just don't get the "IntelliTone". If you're going to use this to verify cables, the fact that you don't have to carry around a Tone Generator in addition to this is a bonus for me.
Question:	do remotes 2-7 verify correct wiring
Answer:	It does not include calibration data unless this is requested when it's ordered.
Question:	What is the maximum amount of remote id can be used if i have 60 network lines in the networks
Answer:	Yes it is made in China as is a lot of their lower end meters
Question:	I left my toner for the 200 probe ..somewhere, which part generates the tone the scanner or the cap? does it make sense to use this as a replacment
Answer:	Yes. Super accurate and reliable. Just switch it on and touch the leads to the wires and the Fluke 113 gives you the reading you want. It automatically switched between ac and dc and all ranges. Stop asking questions and buy this. It's the last voltmeter you will need.

Product features

Fluke Networks MS2-KIT MicroScanner2 Copper Cable Verifier Kit

The Fluke Networks MS2-KIT MicroScanner2 Cable Verifier Kit performs continuity tests on all wires in a few seconds and displays results graphically so you can see opens, shorts, and cross wires. It also reports which end of the cable has a problem and reports the distance to an open connection within the cable. Cable failures result in costly production downtime so it’s important to quickly identify where the cable is broken so it can be replaced or repaired.

Straightforward Interface

Graphical wiremap, length, cable ID, and distance to fault displayed on one screen

Multimedia Support

Tests all common media types including RJ11, RJ45, Coax, with no need for adapters

VDV Service Detection

Verifies today’s media services, including 10/100/1000 Ethernet, POTS, and PoE

IntelliTone Toning

Trace virtually any cable or wire pair with IntelliTone digital and analog toning (MS2-KIT & MS2-TTK only)

We help network professionals ensure the performance and reliability of our connected world.

We provide certification, troubleshooting and installation tools to professionals who install and maintain critical network cabling infrastructure for our connected world. From installing the most advanced data centers to restoring service in the worst weather, we help ensure your jobs are done correctly and efficiently.

Product description

The Fluke 177 Digital Multimeter features 0.09 percent basic DC voltage accuracy. Have a Backlight to Illuminate the Screen in Dark Workspaces. 6000 counts, updates 4 x second digital and 33 segments, updates 40 x second analog bar graph display. Automatically turns off after 2 minutes to save battery life; the timeout feature can be disabled by a power-up option. Hold: freezes the display at the push of a button; auto hold: display holds present reading until it detects the new stable input, then the meter beeps and displays new reading. Minimum, maximum, and average reading memory; In auto range, the meter selects the range with the best resolution for the present measured value. The beeper sounds with a stretched pulse for opens or shorts as brief as 250 microseconds; The message "LEAd" appears briefly on the display when the rotary switch is moved to or from any A (Amps) position. Turn on all LCD segments, Disable beeper, Disable sleep mode, Enable smoothing. The instrument comes with built-in probe holders for probe storage and for convenience when making measurements. Battery replacement without voiding calibration. The integrated overmolded protection provides superior impact protection for your meter. Lifetime warranty. IEC 1010 CAT IV 600V, CAT III 1000V Safety Ratings.

From the Manufacturer

Fluke corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. These can trigger a sequence of events that may lead to serious injury. This is why test equipment must be designed to protect people who work in this high-Voltage high-current environment. The fluke 177 esfp true RMS digital multimeter is compact, rugged, reliable, and easy to use. Unlike averaging meters, which can accurately measure only pure sinewaves, true RMS meters accurately measure distorted waveforms. Calculating true RMS converters require a certain level of input voltage to make a measurement. The ac voltage and current ranges are specified from 5-Percent of range to 100-Percent of range. The selectable ac filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or is noisy. The 177 is multi-lingual interfaced (eng, sp, fr, por), and features a 6000-count, 3-3/4-digit backlit display and a bar graph. Because the bar graph updates about 40 times per second, which is 10 times faster than the digital display, the bar graph is useful for making peak and null adjustments and for observing rapidly changing inputs. The min max avg recording mode captures the minimum and maximum input values, and calculates a running average of all readings. When a new high or low is detected, the meter beeps. The external accessible battery is easy for battery changes. The 177 runs about 200 hours without backlight on one 9-Volt battery (included). Also included are a user's manual and a set of test leads. An optional accessory is the 80bk-a integrated DMM temperature probe with a measurement range up to 260-degrees Celsius. The 177 meets cat iii and cat iv IEC 61010 standards. The fluke 177 esfp true RMS digital multimeter is sold one item per package.

• 6000 counts, updates 4 x second digital and 33 segments, updates 40 x second analog bargraph display
• Automatically turns off after 2 minutes to save battery life; the timeout feature can be disabled with a power up option
• Hold: Feezes the display at the push of a button; Auto hold: Display holds present reading until it detects new stable input, then the meter beeps and displays new reading
• Minimum, maximum, and average reading memory; in auto range, the meter selects the range with the best resolution for the present measurement value
• The message "Lead" appears briefly on the display when the rotary switch is moved to or from any a (amps) position
• Manual and automatic ranging with display hold and auto hold
• Frequency and capacitance measurements; resistance, continuity and diode measurements

User questions & answers

Question:	is this made in usa
Answer:	To be honest I don't know. Looking at the owners manual, there is no mention of the phrase ESFP. The book calls it a True-rms multimeter.You could contact Fluke at www.fluke.com and maybe get an answer there. I like the meter, very durable and relay able use it every day.
Question:	Is the Fluke 177 much better than the Fluke
Answer:	Shows distance to break. To test the far end you will need to use the attached receiver cap. With the cap you will also see any wiring with the wrong mapping. If you are looking for a unit to certify wired runs this is not the unit for that. As this unit will only tell you if the wire is termed correctly, plugged into a switch, plugged into phone service, and check POE, and give you the detailed info a proper certifying unit will.I also used this to diagnose a customers speaker issue. Made a cable to attach to the fluke. Gave me distance to the break and saved me a ton of time.
Question:	Is this multimeter good for electronics? i'm an electronic engineering student and i need a multimeter for iot, ic's and college, etc
Answer:	The main unit displays the correct or incorrect wiring. The remotes allow the tech to isolate the individual cables in a multi-cable run.
Question:	What does ESFP signify
Answer:	There are seven unique identifiers. The wiremapping remote that is snapped on to the top of the tester is #0, and the additional ones in the kit are #1 - #6. You can buy more sets of remotes, but they will all be numbered #1 - #6 as well, so they won't be unique. Typically people move them around to map out their network rather than connect a large number at one time.

Product features

Fluke 177 True RMS Digital Multimeter

Electrician's Dream!

With its precision, reliability and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/ CAT III 1000 V environments, the Fluke 177 is the industry standard with all the features you need to troubleshoot and repair many problems in electrical and electronic systems.

The Fluke 177 Digital Multimeter gives you True-rms voltage and current measurements, 6000-count resolution, manual and automatic ranging and provide frequency, capacitance, resistance, continuity and diode measurements. In addition, the Fluke 177 provides higher 0.09% basic accuracy, a digital display with analog bar graph and backlight.

Product description

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic Test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

From the Manufacturer

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running. Th new 87V/E2 combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. It includes the Fluke 87V, AC220 SureGrip alligator clips set, the C35 soft accessory case, TL224 SureGrip silicone test lead set, 80BK Integrated DMM Proble (type K), TP38 SureGrip slim reach test probe set, and the TPAK magnetic hanger.

• Measure upto 10 a, 20 a for upto 30 seconds
• Selectable filter for accurate voltage
• Input alert provides audible warning against wrong use of input jacks
• The 87v meter has a maximum voltage of 1000 for both AC & DC
• Maximum resistance of 50 mω and a maximum capacitance of 9,999 μf
• Temperature range 200.0 °c to 1090 °c ( 328 °f to 1994 °f) excluding probe
• Overvoltage category: En 61010 1 to 1000 v cat iii, 600 v cat iv
• Maximum conductance of 60.00 ns

User questions & answers

Question:	Need a dmm stricktly for automotive use. will this work better than the 88v? can this measure pulse width too? is true rms necessary for automotive
Answer:	Very well. The meter is held in by a velcro strap on one side of the case and there is a pocket on the other side of the case for the accessories. I have no problem zipping the case shut.
Question:	The third picture shows the magnetic hanger, is that true of this kit or is it a seperate purchase
Answer:	I believe the 177 is USA. Some inexpensive Fluke models are made in China and only have a 3 year warrant. Made in the USA is Lifetime. Calibration once factory seal is broken is valid for 1 year and I believe that is effective for all Fluke instruments.
Question:	Are these in stock? How soon can they be shipped
Answer:	Feature / Model 115 117 Application Field Service Electrician AC/DC Amps Yes Yes Frequency Yes Yes Capacitance Yes Yes Temperature No No Diode Testing Yes Yes LoZ (ghost voltage detection) No Yes VoltAlertTM (non-contact AC voltage detection) No Yes 115 vs 117
Question:	How well does/can the carrying case hold the meter and all of the included accessories
Answer:	The Fluke 177 is an awesome meter for an electrician. I would not advise the meter for an electronics engineer. Once you start needing other options you'll need to upgrade. Insteading of being stuck with 2 meters why not buy a 87V with any upgraded kits e.g, 87v e2. Keep in mind the resell value on USED flukes are great if you decide to upgrade to a higher model in the future.

Product features

Fluke 87V/E2 Industrial Electrician Combo Kit

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently. The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter.

Accuracy

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

Display

Large digital display with bright, two-level backlight makes the 87V significantly easier to read than older models

Applications

Working on VSDs/VFDs: Take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or at the motor terminals.

Industrial troubleshooting: All of the resolution and accuracy you need to solve more problems on motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Checking power quality: Capture glitches and spikes as short as 250 μs. Identify irregular signals.

Accessories

Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks