12 best fluke multimeters

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable Slim Reach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10 foot (3m) drop. The T5 meets safety category: UL, CSA, CE, and VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD displays. AC current accuracy: +/ 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

From the Manufacturer

The Fluke T5-600 600V Voltage Continuity and Current Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. The tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. The T5-600 automatically measures volts ac and volts dc with precise digital resolution and displays resistance to 1000Ω. The tester is rugged enough to withstand a 10-foot (3m) drop. The test leads accept Fluke accessory test clips. An auto off mode helps to conserve battery life. Optional holster attaches to a belt and neatly stows test leads. All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Automatically measures volts ac and volts dc with precise digital resolution
• Displays resistance to 1000Ω
• Easy and accurate OpenJaw current measurement
• Optional holster attaches to a belt and neatly stows test leads
• Can stay connected much longer than solenoid type tester

User questions & answers

Question:	Are you really sure about tenth of a volt? Manual says 1V resolution, and I own one of these and can't make it show tenths, DC or AC
Answer:	I don't currently have one of these. But, the spec sheet indicates .1A resolution on the current measuring (A) scale. All of the voltage scales have 1 V resolution.
Question:	Does the screen light up
Answer:	No it doesn't... That's my only issue
Question:	Is there any way to mount a TPAK hanger on a T5-1000? I would definitely purchase this if I could hang it off the side of a rack in a data center
Answer:	What a good convenient meter. Unfortunately the only way to hang it is if you improvise your own solution. Perhaps the accessory pouch available for the meter would be a good starting place.
Question:	does this read dc amps
Answer:	No, it does not read DC amps. AC amps only. I almost bought a T5-600 based on the misleading answers to this question. Got a 362 instead - the 362 measures DC amps (the T5 series doesn't), and the 362 has one decimal for voltage - the T5 doesn't.

Product features

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. Select volts, ohms, or current and the tester does the rest. OpenJaw current checks up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

Multifunctional

Test voltage, continuity and current all in one electrical tester. For safety and convenience the Fluke T5-600 comes built with auto select between AC and DC voltage.

OpenJaw current readings

Use the Fluke T5-600 OpenJaw to measure current without contact or breaking the circuit with a 12.9mm or 0.5 inches diameter wire.

Measure without breaking the circuit

Easily check amperage on appliances, motors, compressors and other equipment with the Fluke T5-600 without breaking the circuit.

Rugged and reliable

The go-to tool for electrical and HVAC troubleshooting the T5-600 is extremely rugged. Rugged enough to withstand a 10 ft (3 m) drop to make sure it lasts tough job site.

Product description

Designed for basic electrical tests, the Fluke 101 offers reliable measurements for electricians and heating/AC techs. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come.

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer
• Small lightweight design for one-handed use
• Rugged, durable design

User questions & answers

Question:	Does anything come with it
Answer:	TL175 Test Leads are included.
Question:	Can you add the magnetic strap to this
Answer:	The TPAK would work with the 101.
Question:	Is it a backlit screen
Answer:	The 101 does not have a backlight.
Question:	Does it make sound with continuity
Answer:	I just checked , mine doesn’t any sound .

Product features

Fluke 101 Digital Multimeter

Designed for basic electrical tests, the Fluke 101 digital multimeter offers reliable measurements for residential/commercial electricians and heating and air conditioning technicians. This small, lightweight multimeter fits comfortably in your hand but is rugged enough to withstand daily use for years to come. When it comes to professional-grade affordable multimeters, the Fluke 101 digital multimeter is your best choice.

Product description

The Fluke 115 Field Service True-RMS Technicians Multimeter is a compact meter for field service technicians and it is also the solution for a wide variety of electrical and electronic testing applications. It includes a 4mm silicone test lead set, a user manual and an installed 9V battery. The Fluke 115 displays true-rms voltage and current readings with 6000 count resolution, test diodes frequency, continuity and capacitance and provides Min/Max/Average readings to record signal fluctuations. A large white LED backlight aids work in poorly lit areas. Its easy-open battery access door makes battery changes a snap. It has been independently tested for safe use in CAT III 600 Volt environments Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

Rugged and accurate enough for professional use, the Fluke 115 Multimeter for Field Service Technicians is ideal for a wide variety of electrical and electronic testing applications. Offering Min/Max/Average measurements with elapsed time to record signal fluctuations, this True-RMS meter provides easy one-handed operation in a compact package. For added convenience, it arrives ready to go with TL75 test leads, holster, and nine-volt battery.

Portable True-RMS Meter for Readings On the Go

Lightweight and compact, the Fluke 115 is easy to handle, making it the perfect choice for measuring components, voltages, and circuits on the go. Accurate, easy-to-use, and comfortable to carry in the palm of your hand, this multimeter does it all. Use it on the jobsite or around the house--wherever and whenever you need a general purpose, portable meter that gives clear, accurate readings.

Compatible with ToolPak, a convenient magnetic holder (sold separately), the Fluke 115 will give you even greater on-the-job portability.

Simple, Intuitive Operation Ensures Accuracy

Complete with a backlit 6,000-count digital display that features large digits for easy reading, the Fluke 115 is exceptionally user friendly. Its straightforward labeling clearly shows the function of each button, dial, and jack. And best of all, this True RMS meter gives you easy-to-understand readings. For example, a simple beep indicates when a wire or fuse is functioning properly--no beep means it's time to recheck your settings.

For further convenience, the Fluke 115 offers auto ranging, and it guards against common errors that could lead to inaccurate readings. For example, if you forget to turn the dial to 'A', and then feed current into the meter, or if you switch the dial to 'A', but forget to switch the lead to amps, this meter will alert you to the problem.

Professional Meter That's Versatile, Safe, and Accurate

Offering a DC ma range that can handle everything from 200ma to 1A, the Fluke 115 allows you to check continuity, frequency, capacitance, and diode test. It measures 20 A (30 seconds momentary, 10 A continuous) and even provides accurate measurements on non-linear loads.

Additionally, its operating temperature range of -10 degrees to +60 degrees Celsius combines with durable casing for maximum resistance to wear and tear. An added bonus, overload protection ensures uninterrupted operation and long life.

CAT III 600-volt safety rated, the Fluke 115 is UL, CSA, TUV, and VDE listed, and all of its inputs are protected to CE, IEN61010-1 CAT III 600V.

What's in the Box

Multimeter; holster; nine-volt battery (installed); 4mm silicone test lead set; and user manual.

From the Manufacturer

The FLU115 is the solution for a wide variety of electrical and electronic testing applications. Features Minimum /Maximum /Average with elapsed time to record signal fluctuations. This True-RMS meter provides easy one-handed operation in a compact package. Includes TL75 Test leads, holster, user's manual and 9-volt battery (installed).

• True-rms for accurate measurements on non-linear loads
• safety rated
• Large white LED Backlight to work in poorly lit areas
• Operating Temperature -10 °C to + 50 °C Storage Temperature -40 °C to + 60 °C
• Check continuity, frequency, capacitance and diode test
• Measures 20 A (30 seconds momentary; 10 A continuous)
• True-RMS for accurate measurements on non-linear loads

User questions & answers

Question:	Would this be good for automotive work
Answer:	Quite good.
Question:	Is it made in the USA
Answer:	No teerhe 100 series is designed in USA built in China. (To fluke specs) still high quality if you want a USA built model check out the 87-5 or 279 you pay for it though mine with nist cert was 600 bucks
Question:	Is that cables included if I buy in this Fluke 115 true RMS multimeter
Answer:	Fluke TL75 test leads are included.
Question:	Would anyone recommend this for Computer repairs and checking wires in a Computer? (Future PC Technician starting out and shopping for tools
Answer:	This multimeter is not good for computer repair. While it is accurate it doesn't have milli or microamps, which is very necessary for troubleshooting computers. You would need something like the Fluke 177 (a little more than 100 dollars more) and has microamps, or you could get something like a B&K Precision 2708B, which has milli and microamps. Also the B&K Precision is less than 100 dollars, so I would say for a budget meter it's the best considering its ability. I've watched reviews on dozens of multimeters, and the B&K Precision 2708B is pretty quick and quite accurate, especially at its price point.

Product features

Fluke 115 Digital Multimeter

With its simple operation, compact design, and ease of use, the Fluke 115 True RMS digital multimeter provides the perfect answer for general purpose electrical and electronic test requirements. The Fluke 115 displays True RMS voltage and current readings with 600 count resolution, continuity, and capacitance, making it perfect for quick verifications and field service use. Fluke 115 Digital Multimeters are independently tested for safe use in CAT III 600V environments.

General multimeter capabilities

When you need to eliminate false or ghost voltages or perform continuity, connection or basic wiring checks use the Fluke 115. Other measurement capabilities include includes resistance, frequency and capacitance measurement capabilities.

Safe and reliable

Fluke has been a trusted test tool partner since 1948, helping you and your team work safely with tools that meet or exceed the safety standards of the environments you work in. The Fluke 115 multimeter is independently tested for safe use in CAT III 600V environments.

Ease of use

The 115 digital multimeter offers the users one-handed operation and a backlit display.

The large, easy-to-read digits offer a 6000-count resolution.

What's in the box?

Fluke 115 Digital Multimeter

Holster.

Installed 9V battery.

4 mm silicone test lead set.

User manual.

Product description

The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the New C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT.

• The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
• The 117 multimeter features true RMS for accurate measurements on non-linear loads
• The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
• The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on nonlinear signals
• The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage

User questions & answers

Question:	Looks like the 117 includes a non-contact voltage detector. does that mean i don't need a separate non-voltage detector, i.e. 2ac av tester
Answer:	It will sense AC voltage with no contact if within range.
Question:	Why is the 116 better for hvac guys than the
Answer:	The only major differences between the 116 and 117 are thermometer and non-contact voltage detection features, the 116 having the thermometer but not non-contact. I would make a conclusion that HVAC technicians would have more use for a thermometer on the job, where electricians have more use for non-contact.
Question:	Made in the usa or china
Answer:	Mine says designed in USA. I doesn't say exactly where it was made. It is one of the best multimeters you can buy anywhere, regardless of where it was assembled.
Question:	Does this kit come with test leads & the magnetic meter hanging strap
Answer:	Hello,Thank you for your message. The Fluke117/323 comes with the follow: 117 TRMS Digital Multimeter w/ Non-Contact voltage detection 323 AC/DC True-RMS Clamp Meter TPAK ToolPak Magnetic Meter hanging Strap C115 Deluxe carrying case with shoulder strap TL175 TwistGuard Test LeadsIf you have any further questions feel free to contact us. Thank you for visiting our store front.Regards,Customer Service

Product features

Fluke 117 / 323 - Electrician’s Combo Kit

The Fluke 117/323 Electricians Multimeter Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

The Fluke 323 True-rms Clamp Meter is suited for current measurements up to 400 A in a tight cable compartments.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Electrical Maintenance troubleshooting

Eliminate false or 'ghost' voltages or perform continuity, connection or basic wiring checks with the Fluke 177.

Measurement capability

The Fluke 323 measures resistance up to 4 kΩ with continuity detection.

Compact design

The Fluke 323's compact design is suitable for one hand operation and tight cable compartments.

Product description

The Fluke 107 digital multimeter is made to fit the way you work It is designed to fit in the palm of your hand and go with you no matter where your job takes you. Fluke 107 Palms sized Digital Mustimeter with Frequency, Diode Test Leads, and 2 AAA Batteries (Installed) User's Manual Smart Strap.

• Voltage, resistance, continuity, capacitance
• Input terminal for AC and DC current measurements to 10 A and current
• Backlit display
• Data hold
• Diode test, plus frequency and duty cycle measurements

User questions & answers

Question:	Is this a low impedance meter
Answer:	Yes this is a low Z meter
Question:	What size case do you need for the Fluke 107 meter
Answer:	Fluke soft case C-01 will fit the Fluke 101,106 and 107 meters and TL75 test leads. It's a snug fit and comes with a belt loop for easy carry around the job site. If you want a larger soft case with extra room for accessories get the C115 case. I have both and they work very well.
Question:	Does this come as a unit alone, or does this include test leads and the magnetic stand
Answer:	The Fluke 107 comes with Fluke TL75 test leads and a magnetic stand called a "Smart Strap".
Question:	Does this come with a bag (soft case) to carry it around
Answer:	no sir, no soft case

Product features

Fluke 107 Palm-sized Digital Multimeter

The Fluke 107 is a compact, easy to use tool. It is a palm-sized digital multimeter that delivers safe, reliable measurements time after time.

The Fluke 107 is a great product made to fit the way you work! It is the only Fluke digital multimeter designed to fit in the palm of your hand and go with you no matter where your job takes you.

Product description

Fluke Corporation is the world leader in the manufacture, distribution and service of electronic Test tools and software. Since its founding in 1948, Fluke has helped define and grow a unique technology market, providing testing and troubleshooting capabilities that have grown to mission critical status in manufacturing and service industries. From industrial electronic installation, maintenance and service, to precision measurement and quality control, Fluke tools help keep business and industry around the globe up and running.

The Fluke 87-V Digital Multimeter is a versatile True-RMS meter that's perfect for professional or around-the-house use. This meter offers auto and manual ranging for maximum flexibility, and it also offers an annual bar graph for quick-changing or unstable signals. Classically designed, the Fluke 87-V has a removable holster with built-in probe and test-lead storage. For added convenience, it arrives ready to go with TL75 test leads and a nine-volt battery.

The Fluke 87-V Digital Multimeter At a Glance: Auto and manual ranging Removable holster with built-in probe and test-lead storage Built-in thermometer CAT IV 600-volt safety rated Includes TL75 test leads, alligator clips, and 9-volt battery Lifetime warranty

Fits in the palm of your hand.

Safe, Convenient Functions Enable Productivity

Designed for maximum productivity, the Fluke 87-V has more problem solving power, safety, convenience, and impact protection than the previous 80 Series models. This multimeter offers improved measurement functions, accuracy, and resolution, as well as trouble-shooting features to solve problems with motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Auto and Manual Ranging for Versatility

This unique multimeter provides both auto and manual ranging for optimum flexibility. And it's chock-full of helpful functions for accurate voltage and frequency measurements, even on adjustable-speed motor drives and other noisy equipment.

The Fluke 87-V also boasts a built-in thermometer that conveniently allows you to take temperature readings without having to use a separate instrument--no more carrying a thermometer to take readings inside a refrigerator or air conditioning unit.

When used with ToolPak, a convenient magnetic hanger (sold separately), the Fluke 87-V can be set up and viewed hands free.

Selectable Filter and True-RMS AC Voltage for Dependable Accuracy

Incredibly responsive and reliable, the Fluke 87-V is accurate to 0.05% DC. Also, True-RMS AC voltage and current provide accurate measurements on non-linear signals. Additionally, a selectable filter ensures accurate voltage, while an input alert provides an audible warning against incorrect use of the input jacks.

The Fluke 87-V measures up to 0 A, up to 20 A for 30 seconds, and 1,000-volt AC and DC. Also, it features an analog bar graph that allows for measurement of quick-changing or unstable signals. What's more, this meter measures frequency to 200 kHz, as well as resistance, continuity, and diode test.

The Fluke records Min/Max/Average and has a Min/Max alert that automatically captures variations. The Relative mode removes test lead interference from low-ohms measurements.

Easy-Read Display and Safe, Durable Design

The Fluke 87-V comes equipped with a large, backlit display that shows easy-read digits. An improved selectable sleep mode helps increase the life of the battery, while an access door makes for fast battery changes without breaking the calibration seal.

The Fluke 87-V is also safe--it's independently tested to comply with the second edition of ANSI/ISA S82.01 and EN61010-1. Also, CAT IV 600V/CAT III 1000V rated, this handy meter can withstand impulses in excess of 8,000 volts and can reduce risks related to surges and spikes. Additionally, its tightly sealed design helps protect against damage, even when the unit is dropped.

The Fluke 87-V is backed by a lifetime warranty.

What's in the Box

Fluke 87-V; TL75 test leads; AC72 alligator clips; holster; nine-volt battery (installed); Getting Started manual; Manual Fully downloadable off of the Fluke website; and 80BK temperature probe.

From the Manufacturer

Fluke Digital Multimeter has auto and manual ranging for maximum flexibility and has annual bar graph for fast changing or unstable signals. It measure up to 10 A, 20 A for up to 30 seconds as well as up to 1000V AC and DC.

• Accurate frequency measurements on adjustable speed drives (ASD) due to Fluke-designed low-pass filter
• Built-in thermometer allows temperature measurements without a separate thermometer
• Peak Min/Max allows capture of intermittents as fast 250 µS
• Dual display resolution – 6000 or 20,000 counts – lets you see small changes in displayed readings.CAT III 1000V, CAT IV 600V safety rated
• Measure up to 1000 VAC and DC; Operating Altitude: 2000 m

User questions & answers

Question:	What is the primary difference between the fluke 87v and the 87vMax
Answer:	The major advantages of the 87V Max are: Withstands drops up to 4-meters (13 feet) with industrial strength casing and holster Waterproof, dustproof IP67 case for the most extreme work sites
Question:	is thier a difference in the fluke 87 and the 87-v
Answer:	"is thier a difference in the fluke 87 and the 87-v" Is THERE a difference BETWEEN the Fluke 87 and 87-V?
Question:	how low can the meter read in picofareds? 1pf? 10pf? 100pf? not that low? Also the same in resistance
Answer:	Hi the Fluke 87 is measures capacitance in several ranges, the lowest Range being 10.00 nF with a 0.01 nF resolution, the accuracy of this reading is 1% plus several counts. The lowest resistance range is 600 Ohms with a 0.1 Ohm resolution. So to answer your questions No it will not work for your pico farad measurements but it will read resistance less than 500 Ohms. If you need better capacitance reading capabilities you way want to look for s good LCR meter.
Question:	Can the 87-V measure temperature
Answer:	Yes. It has a temperature mode and includes a bead probe. It may be worthwhile to pick up the thermocouple adapter as well.

Product features

Fluke 87V/E2 Industrial Electrician Combo Kit

The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment - even in loud, high-energy, and high-altitude locations. The 87V is designed so you can work more efficiently. The 87V lets you identify complex electrical problems fast. It supports accurate measurements on VFDs using a low-pass filter.

Accuracy

Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment

Display

Large digital display with bright, two-level backlight makes the 87V significantly easier to read than older models

Applications

Working on VSDs/VFDs: Take accurate voltage, current and frequency measurements on the output side of the drive at either the drive itself or at the motor terminals.

Industrial troubleshooting: All of the resolution and accuracy you need to solve more problems on motor drives, in-plant automation, power distribution, and electro-mechanical equipment.

Checking power quality: Capture glitches and spikes as short as 250 μs. Identify irregular signals.

Accessories

Optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks

Product description

From the Manufacturer Compact true-rms meter for commercial applications. The Fluke 17B+ is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

User questions & answers

Question:	Need extra fuses, what is the Fuse part number
Answer:	No need extra fuse for it. 2 fuse inside in product. But If you need it in future. You can easly find it. Can use 11A/1000V Fuse for it.
Question:	What are the package contents
Answer:	The Meter, A Rubber Case, Thermocouple Plug with the ends soldered together to read ambient Temperature, the Meter Leads, and Caps for the Leads, and a Battery. There is a CD for Manual, and a Paper Manual written in Japanese.
Question:	Where i can buy fluke made in us, i am sick of chinese garbage all around
Answer:	Fluke 87v and Fluke 179 Still made in USA
Question:	is this the Chinesee version or the international version
Answer:	It is the USA version. No indication it is from China. It works great and does everything I need done. I was an Electrical Engineer and it works like all the other Fluke meters.

Product description

For the complete solution to HVAC troubleshooting the extra value packed HVAC Technician's Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.

• Fluke116 Digital Multimeter. Designed by Electricians. Engineered by Fluke.
• Fluke 62 MAX+. Small in size. Big on toughness.
• Fluke 116 HVAC Multimeter with Temperature and Microamps. TL175 Hard Point Test Lead Set.
• Dust and water-resistant: IP54 rated. Rugged: 3-meter (9.8-foot) drop tested.
• C115 Deluxe Soft Carrying Case with Shoulder Strap.

User questions & answers

Question:	Will the Fluke 323 measure/capture maximum inrush amps
Answer:	No, the Fluke 323 doesn't have an Inrush function.
Question:	what is the category
Answer:	i did not purchase this Fluke kit, just the 116 meter. I believe the category would be Tools, with the sub category being Electrical Multimeters/Testing Equipment.
Question:	Does the magnetic strap attach to the 323 clamp on meter
Answer:	The magnetic strap is designed to be used with the 116 Multimeter, not the 323 Clamp Meter.
Question:	So this does everything the electrician's kit does + hvac options
Answer:	For the most part, yes. I actually bought this one because of the ability to diagnose flame sensor failures.

Product features

Fluke 116/62 MAX+ Technician’s Combo Kit

The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance.

The Fluke 62 MAX+ infrared thermometer is everything you'd want in your toolbox. Small in size, extremely accurate, and yet easy to use. IP54 rated for dust and water resistance. Precise yet rugged enough to take a 3-meter drop.

Fluke 116 HVAC Multimeter

The Fluke 116 was specifically designed for the HVAC professional. Measure voltage, resistance, continuity, frequency, and capacitance all in one tool!

Going beyond your standard multimeter functions, the Fluke 116 also measures temperature and microamps specifically for HVAC applications and it provides Min/Max/Average readings with elapsed time to record signal fluctuations

Fluke 62 MAX Infrared Thermometer

Everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard-to-reach areas for repair and maintenance.

Fluke has built this small and easy-to-use infrared thermometer with the durability and accuracy you need to do your job—all within your budget.

What's in the box?

Fluke 116 HVAC Digital Muiltimeter

Fluke 62 MAX+ Infrared Thermometer

ToolPak Magnetic Multimeter Hanger

Fluke Test Leads

Carrying Case

• Basic dc accuracy 0.5%
• CAT III 600 V safety rated
• Diode and continuity test with buzzer, Rugged, durable design.
• Small lightweight design for one-handed use
• Automatic shutdown, Battery is easy to replace

User questions & answers

Question:	Forgive my ignorance, can I use this to measure the impedance of a guitar cabinet by contacting the test leads to the input jack
Answer:	Good question! No you cannot. These meters use DC current to test resistance. Transformers and voice coils rely on AC current, which is what introduces inductive capacitance and reactance in a coil, also known as impedance. To keep it simple, these meters will give you an inaccurate reading for impedance values. Find a meter used for audio electronics to test these values.
Question:	What batteries does this take
Answer:	2 batteries AAA
Question:	what is the listed NSN on the back
Answer:	there is no NSN for this model, it is a model designed for china but has been put on the "grey market". no formal support in the USA
Question:	Doe this come with test leads? Odd that they aren't shown or mentioned, but Amazon implies you ought to buy a set with this
Answer:	Its says they come with leads right on the box, my original purchase didnt so I returned it for credit and repurchased the item, the second one came with leads

Product description

Product Information: Fluke 114 Compact Truer MS Digital Electrical Meter is designed by electricians and engineered by Fluke. The Compact truisms meter is for electrical troubleshooting and comes with a tool for go/no-go testing. Featuring AutoVolt: automatic ac/dc voltage selection, large white LED backlight to work in poorly lit areas, resistance and continuity and will prevent false readings caused by ghost voltage. Fluke Meter includes: Holster, Installed 9 V battery, Test leads, User manual. Additional Information: Manufacturer Specification Sheet (PDF File)Manufacturer User Manual (PDF File) Features:#149; AutoVolt: automatic ac/dc voltage selection#149; Large white LED backlight to work in poorly lit areas#149; Resistance and continuity#149; Min/Max/Average to record signal fluctuations#149; CAT III 600 V safety rated#149; Safety conformance: All inputs are protected to CE, IEN610101 CAT III 600V. UL, CSA, T#220;V listed and VDE Specifications:#149; Model Number: 114#149; Maximum voltage between any terminal and earth ground: 600 V#149; Surge protection: 6 kV peak per IEC 610101 600 VCAT III, Pollution Degree 2#149; Display Digital: 6,000 counts, updates 4 per second#149; Bar graph: 33 segments, updates 32 per second#149; Operating Temperature: 10 C to + 50 C#149; Storage Temperature: 40 C to + 60 C#149; Battery type: 9 volt Alkaline, NEDA 1604A/ IEC 6LR61#149; Battery Life: 400 hours typical, without backlight#149; DC millivolts Range: 600.0 mV#149; DC millivolts Resolution: 0.1 mV#149; DC millivolts Accuracy: #177; ([ of reading] + [counts]): 0.5 + 2#149; DC volts Range/Resolution: 6.000 V / 0.001 V, 60.00 V / 0.01 V, 600.00 V / 0.1 V#149; DC volts Accuracy: #177; ([ of reading] + [counts]): 0.5 + 2#149; Auto volts Range: 600.0 V#149; Auto volts Resolution: 0.1 V#149; Auto volts Accuracy: 2.0 + 3 (dc, 45 Hz to 500 Hz)4.0 + 3 (500 Hz to 1 kHz)#149; AC millivolts#185; truisms Range: 600.

From the Manufacturer

Fluke 114 Electrical TRMS Multimeter

• AutoVolt automatic ac/dc voltage selection
• Low input impedance helps prevent false readings due to ghost voltage
• Work in poorly lit areas with the Large white LED backlit display
• Resistance and continuity
• Record signal fluctuations using Min/Max/Average

User questions & answers

Question:	This product is manufactured in
Answer:	It says it was "Designed in USA" right on the back of the multimeter. But I think it was made in China. And my users manual says models 114, 115, and 117 are true-rms multimeters. It does not mention model 116, I don't know why. I really like this meter, it feels very well built and rugged. It measures LoZ, AC and DC Volts and Milivolts no Amps - I never have to worry if the leads are plugged into the correct jacks. Of course it measures Ohms and is lightening fast for continuity, I have compared it to an older Sunpro, BK Precision, and OTC and it is way faster. I added some TL175 silicone test leads capable of screw-on accessories and am very happy with it.
Question:	What is the resistance range on this and how accurate is it? I will be working with resistance less than 1 ohm mainly
Answer:	The lowest resistance range is 600.0 Ohms with a 0.1 Ohm Resolution. Working at less than 1 Ohm, I WOULD NOT recommend this meter, you want to look for a meter with milli-ohm capabilities/ranges. Even a meter with a 10 Ohm range will probably frustrate you

Product features

Fluke 114 Digital Multimeter with TRMS for electricians

Designed for easy one-hand operation, the Fluke 114 True RMS digital multimeter is the perfect troubleshooting tool for 'go/no go' testing. Its AutoVolt capability automatically switches to measure AC or DC voltage, whichever is present. The LoZ function helps identify so-called 'ghost voltage' and prevent false readings. The Fluke 114 displays True RMS voltage and current readings with 6000 count resolution, and tests frequency, continuity and resistance. A large white LED backlight aids work in poorly lit areas. Fluke 114 multimeters are independently tested for safe use in CAT III 600V environments.

Product description

Fluke has combined the Rugged 179 true-rms multimeter with a built-in thermometer and the 323 AC Current Clamp.The combo pack provides you the functionality needed to effectively and quickly identify and troubleshoot most electrical and electromechanical problems.

From the Manufacturer

The 179 model set the new benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability.

• Industrial thermometer combo kit
• Full featured DMM with advanced electronic troubleshooting functions plus probes
• 80BK Temperature Probe
• Installed 9V battery
• Test leads
• Users manual

User questions & answers

Question:	Does this come with a thermocouple to take tempreture as well as the normal probes
Answer:	It includes a pair of normal meter test leads and a 3 foot type K bead wire thermocouple sensor
Question:	does the 179 come with a certificate of calibration
Answer:	Typically on new units, there is a certificate of conformity. Calibration certificates are only provided when meters are sent in for calibration.
Question:	What is the range of the current clamp? fluke has combined the rugged 179 true-rms multimeter with a built-in thermometer and the 323 ac current clamp
Answer:	Fluke website
Question:	does this multimeter come with the lifetime warranty
Answer:	This is extracted from my Fluke 179 manual:*Lifetime* is defined as 7 years after Fluke discontinues production of the product, but at least 10 years after purchase. The LCD display is 10 years. Fuses, batteries, and stupidity associated damage is not covered

Product features

Fluke 179 True RMS Digital Multimeter

With its precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair electrical and electronic systems, the Fluke 179 also offers a digital display with an analog bar graph and built-in temperature measurements.

You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy, and high places you work.