14 best fluke infrared temperature gun

Product description

The Fluke 59 Series Infrared Thermometer is designed to provide precise laser technology for more accurate and repeatable measurements. It has a large, easy to read backlit LCD display for easy viewing. It is small and lightweight design fits easily fits into your tool box. It displays the minimum, maximum or average temperature, or the difference between two measurements. It has Hi and Lo alarms for rapid display of measurements outside the limits. It is powered by one AA battery, and comes with a one year warranty.

• Precise laser technology for more accurate measurements
• Large, easy to read backlit LCD display for easy viewing
• Small and lightweight design fits easily fits into your tool box
• Temperature range: 30 degree C to 500 degree C ( 22 degree F to 932 degree F)
• Used only for industrial purpose (for monitoring electrical, mechanical, HVAC, and automotive systems) and not for health care purpose
• 10:1 distance to spot ratio
• IP40 rated for extra protection against airborne contaminants

User questions & answers

Question:	Can this sensor be used to determine the accurate temperature in an oven
Answer:	Hi this oil do not have a smell at all. If you want the rose smell you have to buy the real rose oil it has that smell but it’s expensive
Question:	Why does fluke say 59 Max+ goes to 350C, and your info says 500C
Answer:	The bottle does not have a dropper, but you can easily remove the seal to pour the oil out faster. A dropper would be helpful though because this oil does come out slowly.
Question:	Temperature range is missing from the product description
Answer:	I think this product is only for aromatic and therapeutic purposes.
Question:	What is the accuracy
Answer:	I’m not sure if this oil is organic or cold pressed. It actually doesn’t say on the bottle.

Product features

59 MAX Infrared Thermometer

The Fluke 59 MAX Infrared Thermometer delivers a precision thermometer that delivers accurate responsive measurements and fits within your budget. It features an 8:1 distance to spot ratio and precise single laser targeting for accurate and repeatable measurements. Use the Fluke 59 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, and vents. It is extremely easy to use and compact enough to fit in your hand and your tool bag.

Product description

Features:

Temperature range from -18 to 275°C

Accuracy: ±2% or ±2°C of reading

Distance-to-Spot: 8:1 @ 90% energy

Repeatability: ±1% or ±1°C of reading

Single point laser sighting

Holds temperature readings for 7 seconds

Backlit display for poorly lit areas

Specifications:

Measurement Range:-18°C to 275°C (0°F to 525°F)

Accuracy:

100°C - 275°C (212°F to 515°F):±2% of reading

0°C - 100°C (32°F to 212°F):±2°C(3.5°F) of reading

Below 0°F (32°F):±3°C(5.5°F) of reading

Repeatability: ±1% of reading or ±1°C whichever is greater

Emissivity:Pre-set 0.95

Distance-to-Spot size:8:1 calculated @ 90% energy

Response time:< 500ms

Display resolution:0.2°C (0.5°F)

Spectral range:6.5- 18 um Thermopile detector

Display hold 7 seconds:Yes

LCD backlight:Yes

Temperature display: °C or °F selectable

Low battery indicator:Yes

Ambient operating range:0°C - 50°C (32°F to 120°F)

Relative humidity:10% - 90% RH non-condensing @ up to 30°C(86°F)

Storage temperature:-20°C - 65°C(-4°F to 150°F) without battery

Power:9V battery included

Battery life: 4 hours

Weight:200g, with battery

Dimensions (H x L x W):152mm x 102mm x 38mm

Standards:

Conforms to EN 61326-1 Electromagnetic

Emissions and Susceptibility

EN 61010-1 General Safety

EN 60825-1 Laser Safety

Certification:CE, CMC

• The lead time is about 3 days. FedEx shipping time to USA is about 5-7 days.
• If any questions, please contact us via message.

User questions & answers

Question:	Does it come with battery
Answer:	1. We don’t recommend any Fluke IR thermometers or thermal imagers for human body temperature measurements or medical screening.
Question:	Is this thermometer shows temperature in Fahrenheit
Answer:	We don't recommend our thermometers for human temperature measurements. The accuracy of this model is ± 1.0 °C or ± 1.0 % of reading, whichever is greater. This is not accurate enough to detect small variations.
Question:	Where is it made
Answer:	nope

Product description

The Fluke 568 dual Infrared and thermocouple thermometer takes noncontact or contact temperature measurements in electrical maintenance and monitoring industrial and manufacturing processes. This thermometer measures temperature with the Infrared sensor from -40 to +800 Degrees C (-40 to +1472 Degrees F) with an accuracy of + or - 1 degree C (+ or - 2 Degrees F). it measures temperature with the included Type K bead thermocouple from -40 to +260 Degrees C (-40 to +500 Degrees F), and it is Compatible with standard Type K thermocouple probes (sold separately). it has a 50:1 Infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area. The thermometer can store up to 99 points of data for analysis and monitoring on a computer. Its display shows the current temperature, the minimum, the maximum, the difference between the two temperatures, and the average temperatures when measured with the Infrared sensor, and it retains the last Infrared measurement for 20 Seconds after it has been taken. It has three emissivity settings that compensate for heat emitted from the surface of shiny objects to increase the accuracy of the measurement. Backlighting helps eliminate light Reflections and improves contrast in low-light conditions. The European Conformity (CE) marking indicates compliance with Applicable European union (EU) Directives. It comes with a Type K thermocouple bead probe, a hard carrying case, two AA batteries, a USB cable, fluke view forms software CD, and Instructions. This thermometer is suitable for measuring the temperature of equipment, systems, and processes in industrial, electrical, mechanical, and manufacturing environments.

• Your unit is calibrated prior to shipment with a new nist-traceable calibration Certificate with data
• The NIST calibration provides you assurance your instrument Meets manufacturer’s specifications. Your instrument is ready to Use day one meeting most quality system standards
• Measures temperature with the included Type K Bead thermocouple from -40 to +260 degrees C (-40 to +500 degrees F)
• 50:1 infrared distance-to-spot ratio with laser sighting for pinpointing the measurement area
• Stores up to 99 points of data for analysis and monitoring on a computer

User questions & answers

Question:	Can this device be used to measure human body temperature
Answer:	Hi, there is a battery level display in the upper right corner, which you can monitor to see where the charge level is up to. For any further questions, please reach out to our support team at 201-500-9696. Thank you.
Question:	Would like to know whether calibration certificate is inclusive or not
Answer:	No, the external mic port is not powered.
Question:	which is a better fit for professional home inspectors, 561, 566 or
Answer:	I haven't used the pre-record option nor have I used the wireless function yet. when I do, I can let you know.
Question:	Will this unit measure the temperature on shiny metal? I am looking to measure press decks and steel molds in the rubber molding industry
Answer:	There are two separate 3.5mm inputs. One for headphones and one for an external mic. You can plug in a headset when you record.

Product description

The Fluke 566 is a two-in-one IR and contact thermometers with an innovative dot matrix display. With a rugged, easy-to-use, ergonomic design, the Fluke 566 two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, and mechanical environments.

• Measure -40°C to 800°C /-40°F to 1472°F (568) or -40°C to 650°C/-40°F to 1202°F (566)
• Easily access advanced features with the soft key buttons and dot matrix display
• Measure smaller objects from further away, with a distance-to-spot ratio of 50:1 (568) or 30:1 (566)
• Compatibility with all standard miniconnector Type K thermocouples allow you to preserve your thermocouple investments
• Confidently measure a wide variety of surfaces, with the adjustable emissivity feature, including a built in material table

User questions & answers

Question:	Does this come with a NIST Certificate
Answer:	no you have to pay extra around $100.00 maybe a little more. I sent mine to acro instruments and got it calibrated and nist cert for $50.00 acro 619-474-7068

Product description

IP54 rated for water and dust resistance. Features. Withstands a 9.8 foot drop Test. Temperature range 62 Max 22 to 932 Max 22 to 1202. Adjustable emissivity. High and low alarms. Dimension 6.8 x 3.3 x 2.9 in.

• Note: This product is for industrial use only. It is not for human use
• Infrared thermometer for non-contact surface temperature measurement for use in monitoring electrical, mechanical, HVAC, and automotive systems
• Measures temperature from 30 to +500 degrees C (-22 to +932 degrees F) with an accuracy of + or 1.5 degree C or + or 1.5 percent of the reading from 0 to 500 degrees C
• 10:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area
• Displays the minimum, the maximum, the difference between the two temperatures, and the average temperatures
• Certified IP54 for protection against dust and splashing liquid
• Small and lightweight making it easy to clip to your tool belt or belt loop

User questions & answers

Question:	I have figured how to set most everything but does anyone know what "tr i9" refers to for item #7 in the manual? Fluke is not much on words
Answer:	It’s very good for my skin
Question:	i cant decide on this or the 62 max - any words of wisdom
Answer:	It does have a smell not sure I would call it sour.
Question:	Does this unit adjust for emissivity
Answer:	It added moisture and worked on lightening dark spots on my face.
Question:	Is this made in the USA
Answer:	The origin is not stated on the label. It states "Packaged in th USA". It is certified organic and verified non-gmo.

Product features

Fluke 62 MAX Infrared Thermometer

Everything you’d expect from the experts in measuring temperature in transformers, motors, pumps, panels, breakers, compressors, duct, steam lines, valves, and vents in hard-to-reach areas for repair and maintenance.

Fluke has built this small and easy-to-use infrared thermometer with the durability and accuracy you need to do your job—all within your budget. These IR thermometers offer precise laser technology for accurate and repeatable measurements.

Electrical

-Electrical panels.

-Wiring and cables.

-Ballasts and bus bars.

-Electrical outlet boxes.

-Oil-filled transformers.

Mechanical

-Motor rise over ambient.

-Hydraulics.

-Gears.

-Shaft alignment.

-Bearings.

HVAC

-Duct leakage.

-Supply/return register.

-Air balance/ stratification.

-Liquid flow through pipes.

-Insulation.

-Blower motors.

-Roofs.

Predictive Maintenance, Hazardous Locations and Process

-Condition Monitoring Trending.

-Mold temperature.

-Oven insulation.

-Pulp and paper machinery.

-Refineries and petrochemical.

-Product temperature (e.g. food).

Product description

The Fluke 561 infrared thermometer is easy to use: just aim, pull the trigger, and read the display. The large backlit display shows the temperature readings in °F or °C, and has a low battery indicator. The thermometer has a unique emissivity selector, which allows you to select from three preset settings. This feature makes it easy to choose the correct emissivity setting for a given application. Other features include Min/Max, scan/hold, display hold, temperature differential, Type K thermocouple input, and dual temperature readout. The meter comes standard with a pipe wrap probe ideal for use in HVAC applications; however, any Type K probe with a mini connector can be used. Available for sale in the United States and Canada only. Designed for the HVAC market, with features that can be used in any IR application Single point laser targets the measurement area. Unique emissivity selector makes it easy for anyone to use. Advanced Superheat feature calculates temperature differential.

• Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments
• Measures temperature from 40 to +550 degrees C ( 40 to +1022 degrees F) with an accuracy of + or 1 degree C (+ or 2 degrees F) for the infrared sensor and an accuracy of + or 2 degrees C (+ or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input
• 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area
• Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F)
• CE mark indicates compliance with applicable EU directives

User questions & answers

Question:	can this product detect heat loss thru concrete
Answer:	This is the most confusing part of the manual (since its all pictograms w/o any text describing it). What the trig setting (on or off) does: If set to "on" then the unit will, if the trigger is held in for 10+ minutes, shut off after 10 minutes. No effect on normal usage. The normal operation is press trigger, let go, read the display... 5-6 seconds later the unit shuts off. But if you toss it in your tool bag, pocket, etc and happen to depress the trigger and it stays that way, it will shut off after 10 minutes - to save battery life. I'd have like to seen a configurable time, or a smaller time - 10 minutes seems excessive. Anything over a minute seems excessive to me.
Question:	I lost the wire attachment from my gun; can I still get an accurate room temperature reading without using the wire probe or laser sight
Answer:	Fluke's web site shows that the Max+ is better in every respect except battery life with laser and backlight on (10 vs. 8 hours) but Amazon inverted the prices today so there's no trade-off to make:Top-end: 500 versus 650 °CAccuracy above 0 °C: greater of ±1.5 °C or ±1.5% versus greater of ±1.0 °C or ±1.0%Response Time: Optical Resolution: 10:1 versus 12:1Repeatability: greater of ±0.8% of reading or For my uses measuring attic temperatures, fry pans, fuse boxes, computer chips, hard drives and compact florescent bulb ballasts that seem to get hot before failing, either model would be fine. I hope that getting a Fluke means that this will tolerate static electricity and drops better and maintain accuracy as the battery wears down or the sensor ages so the specs actually mean something.
Question:	does this unit come with a case? hard plastic or pouch
Answer:	According to the manufacture's website the Max Plus can be manually adjusted for emissivity in a range from 0.1 to 1.00
Question:	Where's the country of origin
Answer:	In the battery compartment of my Fluke 62 MAX+, it states that the unit was made in China in June 2012. Hope this helps.

Product features

Fluke 561 Series Thermometers

With Fluke infrared thermometer, you can also take contact and ambient temperatures in the way that’s best for you. Use the IR thermometer to measure hot, moving, electrically energized, and hard-to-reach objects instantly. Check motors, insulation, breakers, radiant heating, pipes, corroded connections, and wires. Plus, scan ducts, and other hard-to-reach objects from the floor-leave your ladder in the truck.

With a rugged, easy-to-use, ergonomic design, the two-in-one contact and non contact thermometers can stand up to tough industrial, electrical, mechanical, and HVAC environments. These tools go beyond other IR thermometers helping you work more efficiently in more applications.

Benefits of the 561 HVAC Thermometer

Lighten up your toolbox. The Fluke 561 IR and contact thermometer, combines the temperature measurement functions that industrial, electrical, and HVAC/R professionals need, all in one tool. It measures both infrared and contact temperature, replacing several other test tools. It’s fast, efficient, and easy to use, saving you valuable time and effort.

Product description

Simply touch the tip to a terminal strip, outlet or cord. When the tip glows red, and the unit beeps, you know there's voltage in the line. Electricians, maintenance, service, safety personnel can quickly test for energized circuits and defective grounds on the factory floor, in the shop. Continually tests its battery and its circuit integrity with a periodic double flash visual indication using fluke voltbeat technology. It comes with a two year warranty. It detects line voltage from 90vac - 600vac (1AC-AI-II).

From the Manufacturer

The next generation-voltAlertAC non-contact-voltage testers from Fluke are easy to use - just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know-voltage is present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

• Voltbeat technology and continuous self-test - so you always know it is working
• Upon detection, tip glows and beeper sounds
• CAT IV 1000 V for added protection
• Range 90-volt to 1000-volt
• 20-volt to 90-volt AC control circuit model also available

User questions & answers

Question:	Can this determine if a lightbulb socket has power
Answer:	It will always glow when the "hot" side is present. However, if you are missing the neutral to your lightbulb socket your lightbulb will not work, but the instrument will still glow, showing power is present.
Question:	What does this one do better than a non-contact tester at 1/3 of the price
Answer:	It has better build quality, and it's not made in China (to me that means it's less likely to contribute to my death or injury).
Question:	is this better than the klien
Answer:	I find the Fluke's build quality to be better than the Klein. If I drop the Klein, the tail cap falls off and the batteries fly out. I don't have that issue with the Fluke. Also the power button works better, my Klein's button is too sensitive. Also the Fluke I have (the 1AC model) will detect voltage in most tamper resistant receptacles without having to open the shutter, where my Klein will not (some user reported the Fluke is not sensitive but relatively my experience is the opposite). Finally, the Klein and the Southwire are made in China (although the Southwire at least has a LED flashlight built in). The Fluke is not made in China so it is easily worth twice the price to me. You can check out the Fluke and Southwire models at Lowes (and purchase there if you like one or the other). The Klein is often on sale at HD but I really recommend against it compared to the other two.
Question:	What is the difference between fluke 2ac and fluke 1ac-a1-ii
Answer:	The 2ac is the newer model with an "always on" function. It has a button that is used only to ensure that it still has battery power. The 1ac is the older one that can be turned on or off. They both test for voltage presence the same way, but the 1ac has an audible alert function which the 2ac does not have.

Product features

Fluke 1AC II A1 VoltAlert Electrical Tester

Easy to carry in your shirt pocket and with continuous self-test so you always know it’s working, the Fluke 1AC-II non-contact voltage detector allows you to quickly test for energized circuits in the workplace or at home. The VoltAlert AC non-contact voltage testers from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

The tip glows red and a beeper sounds when voltage is detected

• A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
• Optionally, the beeper can be disabled for use in quiet environments

Continuous self-test so you always know it’s working

• When the tip blinks red you know it’s working properly
• Provides a continual visual indication that the 1AC II is on

90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use

• Wide voltage detection range allows for use in a broad range of applications
• Also available in a low voltage model from 20 V to 90 V AC for controls circuits

Safety features

• Rated to CAT IV 1000 V for added protection
• CE and CSA approved

• ✅MEDICAL APPROVED THERMOMETER WITH FAST DELIVERY(AMAZON STOCKS) --- 1-3 Working Days to your home or company.Our brand infrared thermometer is classified as (for CE,FC,RoHS,ISO,F*A) Professional Medical Device.(Each thermometer was detected many times for accuracy by professional equipment, just feel free to purchase).
• ✅1 SECOND READ & SUPPORT OBJECT/BODY MEASURING --- The measured temperature for humans and accuracy is controlled at ≤ ± 0.2 ℃,measuring range is:32℃-42.2℃(89.6℉-108℉).Reads temperature within 1s; .
• ✅NON CONTACT THERMOMETER FOR BABY/KIDS/ADULT --- Its measurement distance is 5cm-10cm that can measure body temperature without touching the forehead. Avoid touch skin, and prevents cross-infection between peoples.Equipped with a clear LED digital screen and easily operated buttons.
• ✅LAB TESTED --- All International Certificate Have Passed! Just feel free to contact us if need certification reports.Include over range shows: "HI" or "LO" on LCD",Green light - normal temperature,Yellow light - slight fever. Red light - high fever.
• ✅QUALITY GUARANTEE --- Each thermometer is rigorously tested for guaranteed accuracy,If you have any questions during use, please feel free to contact us and send us an email. We will provide you with satisfactory service.

User questions & answers

Question:	What type of batteries
Answer:	Yes, it takes three steps. When you finish recording, press the stop button, then the back/"rewind" button immediately to the left of the record button. Then, press play. If you just press play after recording without pressing the back button, all you get is about one second of playback at the end of the recording. I don't see how to do it in two steps. But it would be nice if it worked that way. Maybe Philips could include an option in one of the settings menus that would allow users to select an "auto rewind at end of recording" setting or mode. Wishful thinking. Sorry I couldn't be more helpful.
Question:	how long do batteries last
Answer:	There's no limit on the amount of files per folder. Files can't be named on the recorder itself, only on the computer, when downloaded.
Question:	Does this thermometer read in Fahrenheit? It only shows Celcius in the ad
Answer:	It is not built in, but will work on other devices that the microphone adapter will fit. I prefer that it is separate.
Question:	Is this just for infants or can it be used on anyone? Does it thermometer beep and wake the baby
Answer:	Neither of these recorders are really suited for Dragon Naturally Speaking software. You can contact us at: 877-275-5522 and we will help you come up with the best workflow solution for your industry.

Product features

Non Touch Infrared Thermometer

Perfect to prevent crossed infection and measuring the temperature within the distance range of 1-5cm,compared to mercury thermometer, using a digital infrared thermometer can avoid direct touch with the skin and thus makes temperature measurement safer.

Features of Thermometer Gun

• Infrared Thermometer
• Fahrenheit/Celsius Readings Available
• 1 Second Fast and Precise Reading
• Accuracy is Controlled at ≤ ± 0.2 °F
• BODY/OBJECT 2 Mode Temperature Measurement
• Instant Beeper for Temperature Alarm
• 3 Colors (Yellow light - slight fever. Red light - high fever.)
• Backlight LCD Settings
• Durable and Convenient with Bundle Bag
• 4-12 Days Rapid Delivery Depend on Stock on Amazon Warehouse or Our Local Warehouse

Functions of Buttons

BODY/OBJECT 2 Mode Temperature Measurement

Backlight LCD Settings

Voice turn and off

With detail English instruction

QC PASS

All International Certificate Have Passed!Welcome to message us to get the detail certification info.

C/°F Mode Switch

Long press the “SET” and click "+" to Switch unit of temperature °C/°F

Bundle Bag Include

With bonus bundle bag and easy to carry on

• Highly accurate: Designed with the latest thermopile sensor technology, to allow infrared laser thermometer gun to provide the highest accuracy up to ±1.5%; Improve the accuracy of the ir thermometer gun by adjusting the emissivity from 0.1-1.0 according to the surface material being measured
• Ultra-fast: With a distance to spot ratio of 12:1 and a response time of <500Ms, this allows the infrared temp gun thermometer to quickly provide the most accurate temperature readings of any target even at great distances
• Various usages: Pyrometer utilizes infrared technology which can measure a wide temp range of -58Fahrenheit~1022Fahrenheit / -50Celsius~550Celsius, enabling the heat detector to measure various objects' surface temp from a safe distance, especially above boiling point and below freezing point; Use the temperature gauge while preparing foods, performing auto maintenance, home repairs and a host of other tasks
• User-friendly: The termometro digital displays MAX/MIN/AVG temperature of the last scan, perfect for measuring AC vents or car engines; Thermal gun features a backlit LCD screen, that automatically shuts off after 90 seconds of no use to conserve battery
• Commonly found batteries: Temperature gun is powered by two powerful and commonly found AAA batteries that provide long battery life, when the low battery indicator remind you to change the battery, it's easily replaceable than other batteries. NOTE: This digital thermometer is not designed for taking Human Body Temperature

User questions & answers

Question:	How Can you measure oven temperature
Answer:	You must have a surface that you are pointing the device at. In other words it is not going to measure the air temp in the oven. If you have a baking steel or Pizza stone this would be perfect to measure the surface temperature. If you want to get the temperature of the grate, that works too. I hope this was helpful.
Question:	Will this device take body temperature accurately
Answer:	No. For body temperature you want a specific part of the body that is an enclosed area, usually under the tongue with the mouth closed. But this device only measures surface temperatures.
Question:	What are return policies
Answer:	You can return usually to a ups after you request it online. Just print out the return form and take it to a ups
Question:	Will this item measure air temperature from vents
Answer:	Sort of, yes. Technically no. It measures surface temperatures so it will measure the temperature of the grill the air is coming out of. That should be pretty close the the air temp so long as it has been blowing steadily for a while. But if the heat/cool has just come on it will give an inaccurate reading.

Product features

ThermoPro TP30 Infrared Temperature Gun

ThermoPro TP30 electronic thermometer is a non contact infrared thermometer that can measure highly accurate surface temperatures from a distance. With a 12:1 DISTANCE SPOT RATIO, farther away the target, larger the test spot area will become. IR temperature gun has an adjustable emissivity setting from 0.1 to 1.0, which makes thermal leak detector suitable to measure the temperature of any object or material. A built-in laser pointer allows for maximum accuracy when aiming at targets.

Laser Guidance

Built-in laser pointer with a Distance Spot Ratio of 12:1 enables you to know exactly what you are measuring from all distances. For the best accuracy, the distance between the temperature meter and object should approximately be 7.87 inches (20cm)

Adjustable Emissivity

Laser infrared thermometer has an adjustable emissivity setting from 0.1 to 1.0 to improve the measurement accuracy for measuring any object.

• The emissivity is preset at 0.95, which is suitable for surface temperature measurement of most objects. If you require more accurate measurements, you can refer to the user manual to adjust.

Max/Min/Avg Record

Review the maximum, minimum and average temperatures from your last scan by simply pressing the ‘Mode’ button on the heat thermometer gun. You can use these temperatures to help diagnose any problems with your AC vents or car engine.

High Accuracy for Various Applications:

NOTE: This product is not designed for taking Human Body Temperature!

Product description

600V Electrical Testers let you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable Slim Reach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. Rugged enough to withstand a 10 foot (3m) drop. The T5 meets safety category: UL, CSA, CE, and VDE. 600V AC/DC Voltage. 100A AC Current. Continuity: less than 25 ohms. 1000 ohms Resistance. 45 to 66 Hz Calibration Frequency. 0.5" Jaw Capacity. 1000 counts. Auto ranging, audible continuity, data hold and auto power off features. LCD displays. AC current accuracy: +/ 1.5 percent + 2 Digits. 14 to 122 Degrees F Operating Temperature. AA Batteries. Safety Rating: CAT III 600V. Batteries and instructions included.

From the Manufacturer

The Fluke T5-600 600V Voltage Continuity and Current Tester lets you check voltage, continuity and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. The tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto your belt. The T5-600 automatically measures volts ac and volts dc with precise digital resolution and displays resistance to 1000Ω. The tester is rugged enough to withstand a 10-foot (3m) drop. The test leads accept Fluke accessory test clips. An auto off mode helps to conserve battery life. Optional holster attaches to a belt and neatly stows test leads. All inputs of the T5-600 are protected to EN61010-1 CAT III 600V and the T5-1000 to EN61010-1 1000V CAT III rating. UL, CSA and VDE listed. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

• Automatically measures volts ac and volts dc with precise digital resolution
• Displays resistance to 1000Ω
• Easy and accurate OpenJaw current measurement
• Optional holster attaches to a belt and neatly stows test leads
• Can stay connected much longer than solenoid type tester

User questions & answers

Question:	Are you really sure about tenth of a volt? Manual says 1V resolution, and I own one of these and can't make it show tenths, DC or AC
Answer:	I don't currently have one of these. But, the spec sheet indicates .1A resolution on the current measuring (A) scale. All of the voltage scales have 1 V resolution.
Question:	Does the screen light up
Answer:	No it doesn't... That's my only issue
Question:	Is there any way to mount a TPAK hanger on a T5-1000? I would definitely purchase this if I could hang it off the side of a rack in a data center
Answer:	What a good convenient meter. Unfortunately the only way to hang it is if you improvise your own solution. Perhaps the accessory pouch available for the meter would be a good starting place.
Question:	does this read dc amps
Answer:	No, it does not read DC amps. AC amps only. I almost bought a T5-600 based on the misleading answers to this question. Got a 362 instead - the 362 measures DC amps (the T5 series doesn't), and the 362 has one decimal for voltage - the T5 doesn't.

Product features

Fluke T5-600 Voltage, Continuity and Current Tester

Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. Select volts, ohms, or current and the tester does the rest. OpenJaw current checks up to 100A - without breaking the circuit. Its tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes.

Multifunctional

Test voltage, continuity and current all in one electrical tester. For safety and convenience the Fluke T5-600 comes built with auto select between AC and DC voltage.

OpenJaw current readings

Use the Fluke T5-600 OpenJaw to measure current without contact or breaking the circuit with a 12.9mm or 0.5 inches diameter wire.

Measure without breaking the circuit

Easily check amperage on appliances, motors, compressors and other equipment with the Fluke T5-600 without breaking the circuit.

Rugged and reliable

The go-to tool for electrical and HVAC troubleshooting the T5-600 is extremely rugged. Rugged enough to withstand a 10 ft (3 m) drop to make sure it lasts tough job site.

Product description

Durable nylon construction protects your thermometer while keeping it within reach. Velcro closures provide quick access and a secure closure. Extra accessory pocket for storing temperature probe. Snap-open loop attaches easily to your belt.

• Infrared thermometer holster
• Durable nylon construction protects your thermometer while keeping it within reach
• Cuff hook attachment closure provide quick access and a secure closure
• Extra accessory pocket for storing temperature probe
• Snap-open loop attaches easily to your belt

User questions & answers

Question:	Can this sensor be used to determine the accurate temperature in an oven
Answer:	Yes:Features:Precise laser technology for more accurate and repeatable measurementsLarge, easy-to-read backlit LCD display for easy viewingSmall and lightweight design fits easily fits into your tool box8:1 distance to spot ratioIP40 rated for extra protectionDisplays the minimum, maximum or average temperature, or the difference between two measurementsHi and Lo alarms for rapid display of measurements outside the limitsPowered by one (1) AA batteryOne year warranty
Question:	Why does fluke say 59 Max+ goes to 350C, and your info says 500C
Answer:	Fluke website says the 59max goes to 350C and the 59max+ reads to 500C https://www.fluke.com/en-us/product/temperature-measurement/ir-thermometers/fluke-59-max Measures temperatures from -30°C to 350°C (-22°F to 662°F) https://www.fluke.com/en-us/product/temperature-measurement/ir-thermometers/fluke-59-max-plus Measures temperatures from -30°C to 500°C (-22°F to 932°F)
Question:	Temperature range is missing from the product description
Answer:	Temperature Range -30°C to 500°C (-22°F to 932°F)
Question:	What is the accuracy
Answer:	Fluke claimed accuracy +/- 2 Deg. C or +/- 2% of the reading - whichever is greater. Temperature Range:- From -30 Deg. C to 350 Deg. C

Product features

59 MAX Infrared Thermometer

The Fluke 59 MAX Infrared Thermometer delivers a precision thermometer that delivers accurate responsive measurements and fits within your budget. It features an 8:1 distance to spot ratio and precise single laser targeting for accurate and repeatable measurements. Use the Fluke 59 MAX to perform non-contact temperature measurements on transformers, motors, pumps, panels, breakers, compressors, duct, and vents. It is extremely easy to use and compact enough to fit in your hand and your tool bag.

Product description

With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. In fact, users around the world have said their 117 is an investment in accuracy. The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease. Surge protection 6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2

From the Manufacturer

Compact true-rms meter for commercial applications. The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact-voltage detection to help get the job done faster.

• VoltAlert technology for non-contact voltage detection
• AutoVolt automatic AC/DC voltage selection. DC millivolts - Range : 600.0 mV, Resolution : 0.1 mV
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• True RMS for accurate measurements on non-linear loads.Operating temperature:-10°C to +50°C.Battery life:400 hours typical, without backlight

User questions & answers

Question:	Can this multimeter be used for an Automtive Tech
Answer:	While this multimeter can do plenty of things for automotive. Most serious mechanics get the 87 or 88 series.
Question:	what is the range of the capacitor that can be tested in this model
Answer:	hope this helps. Range/Resolution: 1000 nF / 1 nFRange/Resolution: 10.00 μF / 0.01 μFRange/Resolution: 100.0 μF / 0.1 μFRange/Resolution: 9999 μF / 1 μFRange/Resolution: 100 μF to 1000 μFAccuracy: 1.9% + 2Range/Resolution: > 1000 μFAccuracy: 5% + 20%
Question:	Can this multimeter be used on vehicles for a parasitic load test? I don't want to spend over $400 for the Fluke 88 as it is for personal vehicle use
Answer:	it has been used on motorbikes for sure. It just needs to be in amp mode. If you're doing parasitic load, then you're focused on DC Amps. The 117 has up to 6, while the 88 has up to 10. I don't see a big issue as you're just doing parasitic, not actual use. If anything actually pulls more than 6, you'll blow the internal fuse and have to replace it, but that's about it. Shouldn't be a problem(I've just tested mine on my car and it works).
Question:	What are the differences to pick between the Fluke 117 and the Fluke 115? My intended use would for ham radio and kit-building of electronic kits
Answer:	The 117 adds • VoltAlert™ technology for non-contact voltage detection • AutoVolt automatic ac/dc voltage selection Both are handy but not essential. Be aware of none of these 'electrician' Flukes (115/116/117) read milliamps or microamps -- essential for electronics troubleshooting & design work but unnecessary for electrician tech work. That said, when reading current in amps they do seem to read accurate down to around at least 0.010 amps (10 milliamps) or so.
Question:	is it two prong or three prong? can't see it in the picture
Answer:	It's actually made to be plugged into a grounded wall socket, replacing the 2 3-pronged outlets with its 6 available grounded outlets. It can even replace the outlet cover and be screwed into place. I've got a bunch of these and love them.
Question:	What are the actual dimensions of this unit
Answer:	against the wall, mine is about 4 inches wide, 4 3/4 inches tall, and about 1 3/4 inches deep
Question:	Will this work with half-switched outlets (where one outlet is always live and one is switched), or do all the outlets get power from only one outlet
Answer:	All power for this device comes from the TOP outlet of your receptacle -- so if that is switched then all outlets on this device will be switched (or if your bottom outlet is switched then all outlets on this device will NOT be switched).
Question:	Can this actually completely replace the existing outlet wall plate, or does it only plug in/screw on TOP of the wall plate
Answer:	This can replace the existing wall plate -- that's how I am using it.

Product features

More Outlets

6-outlet wall plug adapter power strip expands 2 grounded outlets into six to power any smartphone including iPhone and Android, lamps, laptops, hair dryer or other electronic device

Space-Saving Design

This outlet tap has three standard outlets and three extra wide spaced outlets to fit your bulky cell phone charger or power adapter

Compatibility

This GE wall plug works with your existing grounded 3-prong 2 outlet duplex receptacle to create a charging station in any room in your home, office, bedroom, kitchen, living room, dorm room or any area with limited outlets

Fluke 117 Electrician’s Multimeter

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

Complete the Tool Belt

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools.

Hands Free Operation

Compatible with optional magnetic hanger (ToolPak) for hands free operation.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Perfect for Preventative Maintenance

The Fluke 117 is a key piece of a full tool belt of Fluke tools for all preventative maintenance needs.

Product description

NOTE1 The measuring surface is about 2cm below the infrared aiming point 2 For best accuracy the distance between thermometer and object of measurement should approximately be 14 17inches (36cm) Simple Operation - Point and Click! Are you looking for an easy way to get accurate temperature measurements? If so this Etekcity non-contact IR temperature gun is exactly what you need Just by one press of the trigger this thermometer will turn on the laser pointer shows target and the big LCD will read the temperature in less than 0 8 second 16 1 High distance spot ratio! This means you may measure the temp of a smaller area at the same distance compared to other 8 1 or 12 1 thermometers thus the readings are much more accurate! Features1 Laser targeting system for more precise aiming 2 Greater distance-spot ratio offers accurate results at longer distances 3 Safely measure hazardous or inaccessible objects 4 Standard 9V battery offers 14 hours of cumulative use 5 Auto-shutoff after 15 seconds to increase battery life 6 Instant-read-display on LCD Specifications Temperature Range -58℉～1382℉(-50℃～750℃ )Accuracy 2%Distance Spot Ratio 16 1Emissivity Adjustable 0 95(fixed)Response Time and Wavelength 500ms and (8-14)unrepeatability 1% or1℃Resolution 0 1℃ or 0 1℉Package Included1x Etekcity Laser grip 800 thermometer1x 9V DC battery1x User's manual

• BETTER ACCURACY: The distance to spot ratio is 16:1 meaning the lasergrip 800 can accurately measure targets at larger measurement area with the same distance compared with other thermometers with DSR 12:1 or 8:1
• TARGET QUICKER: Measure surface temperature ranging from -58℉ to 1382℉/ -50℃ to 750℃ you can choose the unit from ℉/ ℃ A built in laser gives you the precision to hone in on the exact space you want to measure
• ADDED FUNCTIONS The LCD screen is backlit it also has an auto-off function to extend the battery life and features a low battery indicator so you never accidentally run out of juice (battery included)
• VERSATILE DESIGN: Infrared technology makes it to measure the surface temperature of various objects especially temperatures above boiling points and below freezing points; Use it for cooking, ovens; A/C, refrigerators; or soapmaking cats toy etc.
• NOTE: The thermometer can't measure the internal temperature of an object; Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct; Class 2 laser, optical power 0. 5-0. 9Mw

User questions & answers

Question:	I would like to use it to read the temp of oil in my turkey fryer would it be good for that
Answer:	Yes it would be good for that.
Question:	Hi i would like to use this device to measure my cast iron coal stove surface temperature. The range will be 400-700 degrees
Answer:	I use this device for my wood burning stove that's in my outdoor sauna. I aim it at the side of the burning chamber and it works great. I know when it's 600F or higher, that there is a good burn inside. When the temp drops to 500F or lower, I know it's time to add wood!
Question:	I am getting a LO reading what does this mean
Answer:	Hello,There could be a few reasons. One could be that when the temperature is either above or below the measuring range, the LCD displays "HI" or "LO"; another reason usually is that you need to check the battery to see if you may need a new battery.Etekcity Support
Question:	What is the distance that it can detect with accuracy
Answer:	I calibrated mine by pointing it at a cup of boiling water and it was within a couple of degrees. I usually use it at fairly close range (wheel bearings, tires, heating pads, etc) so haven't done any tests to determine long range accuracy but because of the physics of infrared I have no reason to believe it would be any less accurate at longer range. However it is rated at 12:1 spot ratio which means at twelve feet it would nominally be measuring the temperature of a one-foot circle and the farther removed you are the large the circle you would be averaging. One reason I chose this model was because its 12:1 rating was tighter than many other brands which were rated at 10:1 and 8:1. I have also used it to detect cold spots in my walls while standing back 8-12 feet and it has done this reliably.

Product features

Instant Measurements Every Time

Point, aim and measure to get the results you need. The Lasergrip 800 can be used anywhere. Use it for cooking, car maintenance, real estate, electrical engineering and more. Measure extreme temperatures ranging from -58°F (-50°C) to 1382°F (750°C) without ever needing to come in contact. Its versatile functionality and modernized simplicity can do all of the work for you. With a 16:1 distance-to-spot ratio, you have the control over how wide of a surface you wish to measure.

Package contents:

Laser Guidance

Know exactly what you’re measuring with a built-in laser pointer to maximize the Lasergrip’s 16:1 distance-to-spot ratio.

Crystal Clear Display

View accurate readings on a clear backlit display.

Scan, Hold, Record

Scan live temperatures to detect leaks in air ducts and heating vents. The Lasergrip’s automatic data hold function makes it convenient to read.

Durable Exterior Body

Features a UV paint coating that helps reduce scratches and prevent everyday wear and tear while on the job.

Use It at Home

Make sure typical home appliances like AC units or heaters are functioning properly.

In the Field

Perform electrical repairs or automotive maintenance.

Not for Human

The thermometer can't measure the internal temperature of an object; Temperature readings from this devices are inanimate objects, the measured temperature for humans or animals will not be correct.

Product description

Designed for easy one-hand operation, the Fluke 106 digital multimeter is the perfect troubleshooting tool for go/no go testing. This palm-sized digital multimeter delivers safe, reliable measurements time after time.

• Voltage, resistance, continuity, capacitance
• Input terminal for AC and DC current measurements to 10 A and current
• Data hold

User questions & answers

Question:	Does it come with factory calibration? How long
Answer:	568
Question:	does this come with a certificate
Answer:	To compensate for inaccurate readings that may result from measuring shiny metal surfaces, you can cover the surface to be measured with electrical tape or flat black paint (table of some common materials.
Question:	Its made in usa or china
Answer:	Connect the charging USB to your PC and I should come up as a folder/drive on your computer. Then you copy the recording file to your desktop. Hope this helps!
Question:	Does this meter have decent volume on continuity testing
Answer:	This device will not automatically transcribe into a word document, you have to manually upload the file first. Once uploaded, the file can then be transcribed into word.

Product features

Fluke 106 Digital Multimeter

The Fluke 106 digital multimeter is made to fit the way you work! It is designed to fit in the palm of your hand and go with you no matter where your job takes you.