12 best clamp on ammeter

Product description

The Fluke true rms clamp meter is a great clamp meter for general, grab and go troubleshooting needs. The Fluke 323 AMZN is ideally suited for current measurements up to 400 amp in tight cable compartments.

• Digital clamp meter measures ac current to 400 amp, AC and DC voltage to 600 v, and resistance to 4 kilo ohms. Does not measure dc current
• True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
• Jaw opening measures current in a conductor up to 30 millimeter without touching or interrupting the circuit. Resistance accuracy: 1.0% ± 5 digits
• Audible continuity sensor confirms that the circuit conducts electricity
• Meets IEC safety standard 61010 1, and is rated for CAT IV installations to 300V and CAT III installations to 600V

User questions & answers

Question:	I need to measure volts, amps and hertz to adjust my generator. Does this model measure hertz
Answer:	hello this model does not measure herzt.
Question:	if I, say, clamp a 120V AC lamp cord, will it measure amps correctly? What about a 220V pool pump motor? Thanks
Answer:	No. You have to use a AC line splitter tool found here on amazon. The line splitter plugs into the wall and then the lamp plugs into the line splitter. Then you can use your clamp meter to measure amps. this separates the neutral and the hot wire so you can meassure the amperage.
Question:	Is the hold feature peak or last reading
Answer:	The hold is the last reading
Question:	The 323 will measure DC amps as well as AC? What range will this tester handle in DC amps
Answer:	no just ac clamp around wire

Product features

Fluke 323 True-RMS Clamp Meter

The Fluke 323 clamp meter is a troubleshooting tool for commercial and residential electricians. It includes True RMS measurements, optimized ergonomics, and large display for efficient troubleshooting. Use it to verify the presence of load current, AC voltage, and continuity of circuits, switches, fuses and contacts. Its slim, compact size and rugged design make it well suited for measuring current up to 400 A in tight cable compartments.

Continuity detection

Resistance measurement up to 4 kΩ with continuity detection.

True RMS measurements

True RMS AC voltage and current for accurate measurements on non-linear signals.

Ergonomic

Slim, ergonomic design.

Rugged, reliable, and safe

CAT IV 300V/CAT III 600 V safety rating.

Product description

Klein Tools Electrical Tester Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of current and voltage. The kit includes a carrying pouch, test leads and batteries. Electrical Tester Kit with 400 A auto-ranging digital clamp meter. Electrical Maintenance Kit with GFCI tester and line splitter 10x. Kit allows to test live circuits and measure voltage. Backlit display for clear readings. Includes a case, test leads and batteries. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

• Clamp Meter measures AC current via the clamp, and AC/DC voltage, resistance and continuity via test leads
• GFCI Receptacle Tester detects the most common wiring problems in standard and GFCI receptacles including open group, reverse polarity, open hot, open neutral and hot/ground reversed
• Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
• CAT III 600V, Class 2, Double insulation safety rating
• AC Auto-Ranging 400 amp digital clamp meter

User questions & answers

Question:	Is it made in usa
Answer:	Taking a quick glance I don't see where it specifically says "Made in USA" but the manual gives an Illinois address, the manual is written in 'good English' and the tester feels solid in my hand, not flimsy like some equipment that comes with 'bad English' manuals... so make of that what you will.
Question:	Is the min/max function how you would measure inrush current on a large motor
Answer:	Clamp it on a conductor, press Max button, then start motor. I dont think this one shows has the MIN function, but after motor starts running you can turn off the max function and see what the real time current is. I havent tested that with this meter, but thats how all the others I have used worked, so id say its the same here.
Question:	Is the CL110 a true rms
Answer:	No, this meter is not a true rms. Angie/HNSTools
Question:	Can it measure amps from a 5 ton ac unit at 240 volts
Answer:	YES

Product features

Electrical Maintenance and Test Kit

Klein Tools Clamp Meter Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of current and voltage. The kit includes a carrying pouch, test leads and batteries.

• True-RMS clamp meter: This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• LowZ & LPF: Low input impedance helps prevent false readings due to ghost voltage. Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals when measuring motors and transformer. To measure the current you need to clamp the meter around one of the wires and not the whole power cord.
• NCV Detection Function: Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the right side. Simply place your thumb on it and push.
• Multi-function: Two-color backlit LCD Display - When the voltage > 80V, the current > 3A, the LCD backlit screen turns red to warn you of high voltage/ LED Flashlight / Temperature Measurement for liquids and air conditioning ports included K-Type Thermocouple / Low Battery Indication / Auto power off after 15 minutes inactivity.
• Safety Service: Safety standard IEC 61010-1, CAT III 600V. Double insulation. 36 Months product service provided. 7/24 Customer Service.

User questions & answers

Question:	What are the concrete tips for automatic shutdown
Answer:	Step 1.) Run around in circles until u get too dizzy to continue or 15 min has passed, then it will auto shut off. 2.) There is no step two. If you have further questions or need more concrete tips, just continue repeating step 1 until it sinks in.
Question:	W/ backlite on I tilt the meter away from me the display is readable but once I tilt it towards myself the display becomes unreadable, is this normal
Answer:	Yes, with the baclklight on, it's viewable from straight-on to tilted away from yourself, but with the top tilted towards you it loses all contrast. Side-to-side viewing angle is a good. This is a common trait among some LCD displays.
Question:	I want to measure current flowing to my car starter when cranking engine. Does this clamp on meter measure DC current when using clamp
Answer:	Yes, It can read DC starting current with the clamp when set to DC measurement. Reading moves fast but I take video with mobile phone camera and rewind to see the 268A when starting a Nissan Frontier 2.5 L engine. Reasonable current though I cannot check its accuracy yet. I buy meter to monitor DC charging current and confirm non-running car leaking currents under 50mA but need to wait 20 minutes after engine off to let car computer stabilize from initial shutoff which can cab be as high as 0.6A. With this meter, I also find about 10mV leaking voltage on plastic surface between terminals at new battery (due to acid filling spill at manufacturing?) from club store which I need to reduce the Voltage drop to less than 0.1 mV by scribing several grooves on plastics surface around terminal posts. Calibrate to zero by holding Z/F button few seconds before measurement can help read accuracy. I am happy with this meter for the price. Hope you too if do not have time to find a better cheaper on
Question:	how accurate is th DC current measurment
Answer:	I have not checked it against a reference, but I have done some measurements on my car with this. It seemed to reflect a reasonable value when the battery charger was on, showing charging current. and It showed a big current for the started that was believable. When you first set it, you can press a zero button to zero it out. Then I looked at a really bad solar panel that could only put out about 50 milliamps when shorted, and it was able to show that pretty well. So the bottom line, if you are going to use this for debugging stuff, it seems pretty good. If you are going to measure calorie input to control a chemical reactions in a pharmaceutical lab, I can't say. For me, it is just cool that it can do a DC current in the first place. Has already come in handy as I was able to determine my alternator was not charging my battery quite easily.

Product features

To measure Direct Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of DC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

Before measuring the DC current, long-press and hold the Z/F key until the ZERO character appears to clear the data.

To measure Alternating Current

Specifications:

If current> 3A, the orange display lights up.

The measuring range of AC current is 60A/600A. Accuracy: ±(2.5%+5).

Note:

To measure the current you need to clamp the meter around one of the wires and not the whole power cord. The power cord contains two wires carrying current and ground wire. The current in two wires always flows in opposite directions, so the magnetic fields from two wires canceling each other, therefore the meter reads 0 A.

Grasp the individual current conductor to be measured and close the current clamp again. The measured conductor must be placed in the center of the clamp, otherwise, additional errors will occur.

Jaw Design

The Jaw is marked with maximum voltage and current measured value. Suitable for one-hand operation.

Weight & Size

Weight :260g. Size: 7.5 x 2.8 x1.3 inches.

Small and light, easy to carry when working.

Packing List

1 x Kaiweets Digital Clamp Meter 1 x Test Leads (Pair), 1 x Thermocouples(Pair), 2 x AAA batteries, 1 x User Manual, 1 x Carrying Bag

Z/F Button Measurement

Press the "Z/F" button to switch the respective secondary function between the different measurements such as between AC and DC.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without further operation, it beeps again and switches off automatically.

Multi-Function

Accurately measure resistance, capacitance, diode, continuity. Easy to use in laboratory factories and homes.

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

User questions & answers

Question:	Unit shows a voltage when connecting to battery with the probes but then the voltage always slowly drops to zero, even if a good battery
Answer:	one and 7/8ths inches is the widest opening between the wires. Nothing falls through the bottom. You could always line it with a cowboy Bandanna.....or go for a wicker basket. This one works well for Magazines & newspapers and is not too "cute". It should work for your needs, but is only 3 & a half inches deep by 12 inches wide.
Question:	Is this true rms
Answer:	Thank you for your interest in our products. Our product is chrome plated and has a shiny effect. Happy Shopping.
Question:	Does it have BNC or banana jack outputs also to hook up to a oscilloscope
Answer:	This rack measures 10 inches wide at the top, 7 inches from top to bottom and 2 inches from front to back at the bottom.
Question:	Unit shows a voltage when connecting to battery with the probes but then the voltage always slowly drops to zero, even if a good battery
Answer:	As satin nickel finishes vary, this may not match your other finishes exactly, but it should work well. This rack does not have a chrome or shiny finish. The finish has a matte metallic look.

Product features

LH41A Low Current Clamp-On Ammeter

The Amprobe LH41A digital clamp ammeter is auto-ranging meter for measuring current in electrical testing applications. It has a transformer clamp that measures alternating current (AC) or direct current (DC) to 40 amp. The clamp has two jaws that can close around an electrical conductor up to 0.78" (20 mm) in diameter to measure current without touching or interrupting the circuit. The zero adjust function is provided to perform precise DC current measurements, simply zero out the reading before clamping the meter around the wire. The hold function keeps the reading on the display, even after the meter is disconnected. The unit automatically turns off after 8 minutes of non-use to conserve battery life.

This auto-ranging meter automatically selects the correct operating range for the property being measured. The meter has a 4,000-count resolution, meaning that it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed.

Variety of Measurements

Digital clamp meter measures alternating current (AC) or direct current (DC) to 40 amp.

Quality and Safety you can Trust

Meter provides accurate readings when measuring linear loads, where the current or voltage has a sinusoidal waveform.

78" Max. Jaw Opening

Clamp with 0.78" (20 mm) jaw opening measures current without touching or interrupting the circuit.

What's in the box?

- LH41A Low Current Clamp On Ammeter.

- 9V battery (installed).

- Soft vinyl carrying case.

- Users manual.

Amprobe builds rugged, reliable test and measurement tools

Our products have been trusted by professional electricians and HVAC technicians for over 65 years and range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. Rugged built electrical test tools with verified quality and safety, Amprobe offers practical, reliable tools at a fair price. Over the last six decades Amprobe has become a leading manufacturer of safe, reliable electrical test tools for industrial, commercial and residential applications with over 500 products worldwide. Amprobe not only invented the first clamp meter and the first wire tracer, but has also been consistently first to market with innovative solutions to better meet the needs of our professional customers. All Amprobe tools undergo rigorous testing to ensure quality and full compliance with the latest IEC and CE safety regulations in our state of the art environmental and safety testing labs and are further listed with third party certification labs.

Our commitment to high-quality products and customer service is demonstrated by our industry exclusive 'No Hassle' warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot.

Product description

BTMETER

A professional Test & Measurement solution provider.

We dedicated ourselves to test, measurement and monitoring instrument and software that are widely used in electrical, HVAC, automotive,network troubleshooting, as well as in hobbist,electrical, industrial, medical applications.

Why BT-570N Pro Clamp Multi-meters?

• - Auto(15mins without operation) / Manual shut down optional 
• - High resulotion,True RMS for increased accurate measurement regardless of waveforms.
• - 6000 counts Large Backlight LCD screen makes this current clamp meter  easy to read.
• - Average sensing, calibrated to rms of sine wave on AC Voltage, AC Current test
• - Easy to use, comes with all accessories to start (9V battery, thermocouple, test leads, multimeter case)

Specifications:

• 6000 Counts Auto Ranging clamp tester
• DC Voltage: 600mV,6V,60V,600V,1KV
• AC Voltage: 600mV,6V,60V,600V,750V
• DC Current: 200A,1000A(Resolution 0.1 amp/ 1 amp)
• AC Current: 200A,1000A(Resolution 0.1 amp/ 1 amp)
• Resistance: 400Ω,4000Ω,40KΩ,400KΩ,4MΩ,40MΩ
• Capcitance:9.999nF, 99.99nF,999.9nF,9.999uF,99.99uF,999.9uF,9.999mF, 99.99mF
• Frequency:9.999Hz,99.99Hz,999.9Hz,9.999kHz,99.99kHz,999.9mHz
• Duty cycle:0.1%~99.9%
• Temperature:-20℃~-1000℃(-4℉~1832℉)

More features:

• Data Hold
• Diode Test
• Relative Value
• Auto Power OFF
• Low battery indicator
• Inrush Current Test
• Backlight(Manual turn on/off)
• Automatic negative polarity indication

• ✅TRUE RMS CLAMP MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test.
• ✅PROFESSIONAL LEVEL - High resulotion,True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off, polarity and low battery indicator.
• ✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this Clamp Amp Meter for unidentified wire testing, Non-contact amperemeter test for amperage, Avoid electric shock without touching any wires.
• ✅HIGH ACCURACY AMPERAGE METER - 0.1 amp resolution ratio for AC DC Amp measurement for 200A, 1A amp resolution for 1000A. Ideal measurement tool to troubleshoot electrical mechanical problem of cars HVAC household appliances safely and accurately
• ✅LARGE DIGITAL DISPLAY - Well built with backlit LCD for visibility in dimly light areas. Extensible thermocouple probe support measures high temperature from -4 to 1832℉(-20 to 1000℃). Jaw Caliber Size 1.77 inches (45mm)

User questions & answers

Question:	Does the BT-570N clamp measure dc inrush current
Answer:	Hello! Thank you for your question. Unfortunately it does not come in Brushed Nickel finish at this time.
Question:	What’s the app name? i can’t find the app in the apple app store
Answer:	It should hold a jumbo size roll. I use Scott’s 1000 sheet rolls, so if you can compare your paper to the Scotts
Question:	Can i use this clamp meter to test the amperage, ohms, and inrush current on my car audio amplifier, alternator, battery, and subwoofers
Answer:	We moved and I had to leave it since it was attached to the wall, but I can tell you it holds a standard magazine nicely. If i had to guess I'd say the basket is roughly 12"across the top and about 10" high. Hope this helps.
Question:	Will this device measure 0.5-10 amps ac or dc? (as in hvac applications
Answer:	It is open across the back. Two down wires have screw eyes for mounting. 3M hooks might work but it must be against a wall. Unless your kids are small they may not be able to get their hands to the bottom and small items may not stay inside. Hope this helps.

Product features

BTMETER BT570N Auto Range True RMS Digital Clamp Meter is a Strong protection , handheld professional Tools

This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices.

It's compact, lightweight but durable and very easy to operate. It can measure AC/DC current, AC/DC voltage, resistance, continuity(buzzer), Inrush Current, True RMS, transistor and diodes with a very high degree of accuracy .

Jaw Size up to 1.77 inches ( 45 mm ) for measuring many size cables flexible.

Large diameter opening for easy use

Jaw Size 1.77 inches ( 45mm ) suitable for most jobs . Designed accord with CATIII 1000V standard . Strong protection to troubleshoot a variety of automotive and household electrical safely and accurately.

Inrush current test function

Inrush current is the maximal instantaneous input current drawn by an electrical device when first turned on. Alternating-current electric motors and transformers may draw several times their normal full-load current when first energized, for a few cycles of the input waveform. And often having inrush currents much higher than their steady-state currents, due to the charging current of the input capacitance. The selection of overcurrent-protection devices such as fuses and circuit breakers is made more complicated when high inrush currents must be tolerated.

High Temperature measure range

Temperature measure range -20℃~-1000℃(-4℉~1832℉) by test probe . ℃ / ℉ unit Selectable.

Product description

Digital Clamp Meter AC DC Meter AP-7200B Clamp Amp Meter TRMS 6000 Counts Voltage Tester Auto-ranging measures Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ammeter

 

The AOPUTTRIVER Multimeter combines ease of use with innovation, making it the perfect tool for any electrical project.

Easily test AC/DC Voltage, diode, continuity, NCV and resistance. Avoid hazardous situations by using the convenient clamp to safely measure AC currents without having to strip a cord or break a circuit.

 

Technical Specifications:

1.DC Voltage: *600mV/6V/60V ±(0.5%+2) *600V ±(0.8%+2)

 

2.AC Voltage: *6V/60V ±(1.0%+3) *600V ±(1.5%+3)

 

3.DC Current: *60A ±(2%+10) *400A/10A ±(3.0%+10)

 

4.AC Current: *60A ±(2%+10) *400A/10A ±(3.0%+10)

 

5.Resistance: *600Ω ±(1.0%+3)*6kΩ/60kΩ/600kΩ/6MΩ ±(1.0%+2) *60MΩ ±(1.5%+3)

 

6.Frequency: *9.999Hz~9.999MHz ±(0.1%+5)

 

7.Power Supply: 2*1.5V(AA) Battery

 

8.Safety Class: IEC 61010-1, CAT II 600V

 

Product Feature:

• Diode
• Data Hold
• Continuity
• Backlight
• AC DC Current
• AC DC Voltage
• Relative Value
• Auto Power Off
• Temperature ℃
• Non Contact AC Voltage detection

 

Package Contents:

• 2 x Test Lead 
• 1 x User Manual
• 2 x 1.5V AA Battery
• 1 x Temperature Probe
• 1 x 7200B Digital Multimeter  

 

 

⭐⭐⭐BUY WITH CONFIDENCE⭐⭐⭐

Our product comes with  90-day return refund guarantee, 2 years warranty and lifetime supported by AOPUTTRIVER, If you have any problems, please don’t be hesitate to contact us! 

• ➤【Multifunction Clamp Meter】 6000 Counts Auto-range AC/DC amps clamp multimeter with the DC Voltage range:600mV~600V, AC Voltage range:6V~600V, AC/DC Current: 60A~400A; Resistance:600Ω~60MΩ; Ideal Non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis.
• ➤【True-RMS Clamp Meter】 This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests in ℃. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
• ➤【NCV Detection Function】Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the left side of the rotary switch. Simply place your thumb on it and push.
• ➤【Accuracy AC DC AMP Meter】 This clamp meter with the AC/DC Current Range : 60A~400A; and it provides meaning full measurements at 0.1A or above. So you no need to worry to measure the low current readings; Note that for low-current measurements one can loop the wire around the jaw multiple times, multiplying the reading by the number of turns.
• ➤【Safety Guarantee】 Safety standard IEC 61010-1, CAT III 600V. Double insulation. 48 Months product warranty provided. 7/24 Customer Service. If you have any problems with our product, just contact us, and we will solve the problems for you ASAP.

• High Accuracy Clamp Meter: Accurately measures AC Current (DO NOT MEASURE DC CURRENT!), AC/DC Voltage, Capacitance, Resistance, Diode and Continuity Tests.
• Large Jaw Design and Mini Size: Jaw opening measures AC current in a conductor up to 26mm without touching or interrupting the circuit. Its slim and compact size makes it easy to operate in narrow spaces
• Multi-Function: Data Hold, Max Reading, Low Battery Indication and NO operation in 15 minutes the ammeter automatically enters sleep mode.
• Two-Color Backlit LCD Display: When the voltage > 80V, the current is> 3A, the LCD backlight screen turns orange to warn you of high voltage. The backlit LCD display also helps you to see the reading clearly in the dark.
• Safety and Service: Safety standard IEC 61010-1 and is rated for CAT III 600V. 3-Year service and lifetime support, 7/24 Customer Service.

User questions & answers

Question:	Can I use this to measure the voltage on my car battery
Answer:	Voltage yes.
Question:	is this meter a true RMS
Answer:	Hi, HT200B is not true rms meter. There is fuse protection while reading continuity if voltage is present.
Question:	Does it have an audible beep for continuity
Answer:	It does have an audible beep for continuity and the LED lights up.
Question:	Can I get an accurate amp reading on kitchen appliances this meter
Answer:	They sell a gizmo that you plug your appliance into and then plug into the wall. It separates the wires so you can measure your amps. It's square in form. BTW, the start-up amperage of motors can be 3 times the working amperage. This meter will grab the highest current draw for you if you just push the "Max" button before you turn on the appliance. It will turn the LED display red to alert you that it's done that. Great meter.

Product features

Continuity Test

If the resistance is <30 Ω, an acoustic signal sounds continuously and the LED lights up.

AC/DC Voltage Test

Use the test leads to get the reading quickly and accurately. (Max 600V)

Resistance Test

Range: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ

Accuracy: ±(1.0%+5).

Two-color backlit

When the voltage > 80V, the current > 3A, the LCD backlit screen turns orange.

Hold Function

Freezes the display reading. Reading is released when button is pushed a second time.

Automatic Shutdown

No operation in 15 minutes, the clamp meter beeps 3 times. Without the further operation, it beeps again and switches off automatically.

• ⚡【Remotely Monitoring on Your Phone】 Built-in wireless connectivity can auto connect to your Android / APPLE phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later.
• ⚡【AC/DC Ammeter Voltmeter】 This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity Buzzer and Temperature(℃) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in cars, boats battery motors, household appliances, HVAC
• ⚡【Continuous Data Logging DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same display with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.
• ⚡【Accurate Voltage Amperage Meter】0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading, this clamp amp probe meter is more user-friendly for high current measurement.
• ⚡【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter

Product features

BTMETER BT-570CAPP Intelligent Autoranging Digital Clamp Multimeter

• Phone/Tablet APP "intelligent clamp meter" available on App Store, Google Play.
• Average sensing, calibrated to rms of sine wave on AC Volt, AC Amperage test.
• This AC/DC clamp-on ammeter is ideal for remotely troubleshoot electrical problems
• Sync electric data to your phone via Bluetooth APP, display all measurement and generates analog waveform graph on APP
• Default setting to stays on to support continuous measuring, data logging, transfer the data in excel/txt. You can set auto shut down in the APP

Wireless Connect with your Phones

Automatically pair with one bluetooth device in just few seconds.(Shut down other unnecessary bluetooth signals during pairing.) The App can be used in IOS 7 or android 4.30 and up. Support Bluetooth 4.0 version.

Both AC/DC Volt Amps Clamp Meter

It can accurately measure DCV to 0.1m volt, ACV to 1m volt; DC/AC Current to 0.1 amp; Resistance to 0.1 ohm. Features with “REL” to zeroing for magnetic environment to make sure you get accurate readings anytime,anywhere.

Remotely Monitor Logging

The app will synchronous display the readings, also with MAX/MIN/AVG and measuring time, it means you can remotely record the readings every 1-120 mins from different floor, ground to roof, within 49ft.

Product description

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Built to withstand a 6.6-foot (2m) drop. Low battery indicator and easily accessible battery compartment. Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C). Operating altitude to 6562-foot (2000m). Includes carrying pouch, test leads, thermocouple with adapter and batteries. Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857. Voltage - 1000V AC, 1000V DC

• Clamp Meter with automatically ranging true mean squared (TRMS) technology for increased accuracy
• Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
• Thermocouple probe measures temperature
• Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
• CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating

User questions & answers

Question:	How small of DC current can this measure? 5mA and lower
Answer:	I'm afraid not. According to the instruction manual, in the lowest DC current range (60.00A) the resolution is 10mA. The accuracy is +/-(2.0% + 8 digits).
Question:	Can these test between 3 phase circuits? Thanks
Answer:	Yes it can, I don't trust it to do it because of the jumps in voltage that happens when it is lightly tapped
Question:	Does it come with a case
Answer:	Yes, Klein does package this meter to be included with a case.
Question:	Does this meter handle run/start capacitors in hvac work
Answer:	Yes this meter and Fluke 324 check capacitance, but the Fluke 324 will NOT check Max amperage nor starting amperage of an air conditioning compressor like this meter does. The Fluke 325 does but is almost $300.

Product features

Digital Clamp Meter AC/DC Auto-Ranging 600 Amp

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians.

Product description

The Fluke 117/323 KIT Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit Fluke 117/323 KIT Fluke Multimeter, 117 Digital Multimeter/323 TrueRMS Clamp Meter Electrician's Combo Meter Kit pairs the Fluke 117 multimeter with a Fluke 323 clamp meter for productive and effective troubleshooting in one total solution, including the New C115 durable soft carrying case for protection and easy meter transportation. Replaces: Fluke 117/322 KIT.

• The 117 multimeter measures AC and DC voltage as well as AC and DC amps. The 323 clamp meter measures AC and DC voltage as well as AC amps
• The 117 multimeter features true RMS for accurate measurements on non-linear loads
• The 117 multimeter features low input impedance which helps prevent false readings due to ghost voltage
• The 323 clamp meter provides a true RMS AC voltage and current for accurate measurements on nonlinear signals
• The 323 clamp meter measures 400 A AC current and 600 VAC and DC voltage

User questions & answers

Question:	Looks like the 117 includes a non-contact voltage detector. does that mean i don't need a separate non-voltage detector, i.e. 2ac av tester
Answer:	It will sense AC voltage with no contact if within range.
Question:	Why is the 116 better for hvac guys than the
Answer:	The only major differences between the 116 and 117 are thermometer and non-contact voltage detection features, the 116 having the thermometer but not non-contact. I would make a conclusion that HVAC technicians would have more use for a thermometer on the job, where electricians have more use for non-contact.
Question:	Made in the usa or china
Answer:	Mine says designed in USA. I doesn't say exactly where it was made. It is one of the best multimeters you can buy anywhere, regardless of where it was assembled.
Question:	Does this kit come with test leads & the magnetic meter hanging strap
Answer:	Hello,Thank you for your message. The Fluke117/323 comes with the follow: 117 TRMS Digital Multimeter w/ Non-Contact voltage detection 323 AC/DC True-RMS Clamp Meter TPAK ToolPak Magnetic Meter hanging Strap C115 Deluxe carrying case with shoulder strap TL175 TwistGuard Test LeadsIf you have any further questions feel free to contact us. Thank you for visiting our store front.Regards,Customer Service

Product features

Fluke 117 / 323 - Electrician’s Combo Kit

The Fluke 117/323 Electricians Multimeter Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.

The Fluke 117 is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117 includes integrated non-contact voltage detection to help get the job done faster.

The Fluke 323 True-rms Clamp Meter is suited for current measurements up to 400 A in a tight cable compartments.

Non-Contact Voltage Detection

The 117 includes integrated non-contact voltage detection to help get the job done faster.

Electrical Maintenance troubleshooting

Eliminate false or 'ghost' voltages or perform continuity, connection or basic wiring checks with the Fluke 177.

Measurement capability

The Fluke 323 measures resistance up to 4 kΩ with continuity detection.

Compact design

The Fluke 323's compact design is suitable for one hand operation and tight cable compartments.

Product description

Etekcity's Digital Clamp Mustimeter ensures household electricity maintenance safe.

• Accurately Measures: AC/DC voltage, only for AC current (not for DC current), resistance, and also provides diode and continuity tests
• Jaw Opening: the Clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
• Additional Features: data hold, max reading, and an easy-to-read large LCD
• Easily Carrying: comes with a handy carrying pouch, perfect for use while you're on the go
• Sleep Mode: automatically enters sleep mode after 15 minutes of inactivity for energy conservation

User questions & answers

Question:	can i get an accurate amp reading on kitchen appliances such as toasters, microwaves with this meter
Answer:	Sounds like what you need is a Kill-A-Watt meter (brand name). You plug the meter in the wall then plug the appliance in the meter. Real simple. Gives amps, watts, volts, etc.
Question:	Can the clamp measure voltage without load
Answer:	The clamp (non-contact) can only measure current (amperage), not voltage. To measure voltage, you'd need to use the probes on a physical connection (terminal or bare wire).
Question:	I am working on a light fixture - if I want to test the actual wires (and not outlet) to see if they're live, what setting would I need to do this on
Answer:	Nobody else said it, but if you use the clamp meter, it must be around a SINGLE wire, it will not work if you clamp around both wires of the cable. You must separate the wires, and clamp only one wire. And the clamp is only gonna measure current, so if the lamp isn't working, this probably won't work. If the plag is plugged-in though, there will be a voltage present, so a non contact voltage tester should be sufficient enough to tell you it's live. Please be careful.
Question:	people said it has an audible beep for continuity and 2 people said it doesn't. What is the true answer
Answer:	It does have an audible beep for continuity. It is an option that must be activated by pushing a button to enable this feature of continuity testing.

Product features

All Purpose Multimeter

The Etekcity Multimeter combines ease of use with innovation, making it the perfect tool for any electrical project.

Easily test AC/DC Voltage, diode, continuity, and resistance. Avoid hazardous situations by using the convenient clamp to safely measure AC currents without having to strip a cord or break a circuit.

It also features hold result and max value buttons that makes it quicker and easier to use.

The autoranging function helps you get precise measurements, every time.

Safe & Simple

Safely measure AC currents with the clamp, so you don’t have to strip any wires.

Voltage Test

Get quick and accurate results when you test both AC and DC voltage.

Multifunctional

Take advantage of multiple functions such as HOLD, MAX, and SELECT.

Autoranging Assistance

The autoranging function allows you to get quick and accurate results.

Diode & Continuity

Ensure that all your electrical connections are correct and safe.

Auto Off

The auto off function saves battery life to maximize your usage.

LCD Display

The easy-to-read LCD display gives you clear measurements.

Unpacking

Comes with a user manual and convenient carrying case.

Product description

The Triplett 9200-A is a 3-3/4 (4000 count) mini AC digital clamp-on meter with a large display. It offers a standard DC Current and Data Hold functions. The ABS plastic housing provides impact and drop resistance in a sleek ergonomic design, and the user-friendly Auto Ranging helps maximize results. With an industry standard CAT III design it provides resistance to damage from transient over-voltages in any demanding setting. The Model 9200-A is suited for a variety of commercial and residential applications such as security, electrical, HVAC installations and more. Includes Model 9200 Clamp Meter, 3-volt battery, carrying case, and instruction manual. Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself on developing innovative, reliable, and durable test equipment that also won't break the bank. Triplett's catalog contains a wide array of test equipment parts and accessories such as multimeters, voltmeters, cable testers, security cameras and security camera accessories, wire cable mapping kits, video monitors, and other specialty testers. They serve industries such as HVAC, security, electronics and electrical, telecom, and more.

• Simple two-button operation with measurement range of 0 to 300 amps AC
• Large, 3-3/4 digit, 4000 count display
• Auto-Ranging and Auto Power Off maximize accuracy and battery life
• Overload protection with industry standard CAT III design that provides resistance to damage from transient over-voltages
• Includes case, wrist strap, and 3V CR2032 battery

User questions & answers

Question:	Looks nice, just ordered one. Wondering why no carry bag though
Answer:	you would have to wire it differently but should work
Question:	does this clamp measure DC Amps
Answer:	Only on the auto meter gauge you can, this is just a light to let you know when you hit your pre adjusted shift point
Question:	When crossing probe tips on continuity it rarely functions. Ohms range works fine shows leads ok when crossed
Answer:	No it won't work with just a tach. This is just an LED light. Uses low power unlike a regular light bulb. This needs a switch source to turn it on and off, like an after market computer or else it would stay on all the time.
Question:	Does this have a peak hold function
Answer:	No, this is designed to plug into the Auto meter gauge or can be triggered off something that can send a power signal to the light.

Product features

Easy to Use - Two Button Operation

The Triplett 9200-A is a 3 3/4 (4000 count) mini AC digital clamp-on meter with a large display. It measures 300A AC Current and features a Data Hold function. The user-friendly Auto Ranging helps maximize results.

The 9305 is well suited for a variety of industrial and residential applications such as security, electrical, HVAC installations and more.

Rugged Design

The ABS plastic housing provides impact and drop resistance in a sleek ergonomic design.

Over-Voltage Protection

CAT III 300V design provides resistance to damage from transient overvoltages in any demanding settings.

What's in the Box

Includes wrist strap, CR2032 battery, and case.