12 best rechargeable battery tester

Product description

* Easy to use - no switches or settings* Quickly and easily identify weak or failing batteries* Patented high accuracy Pulse Load Test* Ideal for battery management and cell matching* Made in U.S.A.The ZTS Multi-Battery Tester (MBT-1) provides a comprehensive means of testing the state of charge or state of power for more than 30 battery types. This microprocessor-controlled instrument is designed to test popular primary (non-rechargeable) and rechargeable batteries using a patented, high accuracy pulse load test. After a fully automatic test cycle, percentage of remaining battery capacity is indicated on the LED bar display. Battery types are clearly labeled next to appropriate contacts. Negative test lead/probe conveniently stores in seam at side. There are no switches or settings, and test results are easy to understand. Test NiMH, Li-Ion, alkaline, lithium, coin cell, button type and more: 3.6v Li-Ion rechargeable [RCR123A, 18500, 17650, 18650]; 1.5v button cell [S76, A76, A625, A640, LR44, 357, 303]; 1.2v NiMH/NiCd rechargeable [AA, AAA, C, D]; 1.5v lithium [AA L91, AAA L92]; 3v lithium coin [CR1216, CR1220, CR1232, CR1612, CR1616, CR1620, CR1632, CR2016, CR2025, CR2320, CR2032, CR2430, CR2450, 58L, 1/3N]; 6v '28' series [28A, S28, 28L, 544, 4LR44]; 3v lithium cylindrical [CR123, CR2]; 1.5v alkaline [AA, AAA, C, D, N]; 12v alkaline [A23]; 9v alkaline & carbon zinc. Uses 4AA batteries (not included).

• Easy to use - no switches or settings
• Quickly and easily identify weak or failing batteries
• Patented high accuracy Pulse Load Test
• Ideal for battery management and cell matching

User questions & answers

Product description

The ZTS Mini Multi-Battery Tester (Mini-MBT) provides a comprehensive means of testing more than 15 battery types. The Mini-MBT's microprocessor-based design makes battery testing simple - using a patented, high accuracy pulse load test. After a fully automatic test cycle, percentage of remaining battery capacity is indicated on the LED bar display.

Battery types are clearly labeled next to appropriate contacts. There are no settings, and test results are easy to understand. Its small size makes it ideal for the gadget bag, toolbox, or home utility drawer. Negative test lead/probe conveniently stores in seam at side.

Advantage of Pulse Load Technology:Battery performance is very important in today's electronic devices. The Mini-MBT computes the battery's actual remaining power capacity using a 2-second pulse load test. This pulse load simulates the real power demand that batteries experience in a high drain electronic device. So battery performance is measured, not just voltage. The load is automatically disconnected, so testing will not harm or drain the battery.

TESTING CAPABILITY:

• 1.2v NiMH / NiCd rechargeable [AA, AAA, C, D]
• 1.5v alkaline [AA, AAA, C, D, N]
• 3v cylindrical lithium [CR123, CR2]
• 3.6v Li-Ion rechargeable [18500, 17650, 18650, RCR123A]
• 9v alkaline & carbon zinc

FEATURES:

• Power (internal): 4 AAA batteries
• Display: 5 LEDs - colors green, yellow, red
• Pulse Load: magnitude varies according to battery type
• Operation: microprocessor-controlled test cycle
• Test duration: approx. 2 seconds
• Contact terminals: solid brass, nickel-plated
• Dimensions: 4 x 2.5 x 0.75 inches
• Weight: approx. 3 oz. (85g)
• Made in U.S.A. Patents 6,823,274 and D515444.

• ACCURATE MEASUREMENT: Patented high accuracy Pulse Load Technology measures the charge and life of your batteries under a load; more reliable than just a voltage readout
• SIMPLE TO USE: No switches or settings, fully automatic 2-second test easily identifies weak or failing 1.5 V AAA AA C D N 1.2v NiMH NiCd 3.6v Li-Ion 3v Photo Lithium 9v alkaline batteries
• SAVES YOU MONEY: Test the remaining percentage of your battery’s capacity before recycling it, keep an eye on all the batteries in your home
• COMPACT DESIGN: Small size is easy to pack and travel with, probe and lead wire conveniently store away in the seam
• BUY WITH CONFIDENCE: Proudly made in the United States with a one year warranty from date of purchase

User questions & answers

Product description

The BAT-200 Battery Tester indicates the amount of charge remaining in standard and rechargeable batteries. The analog display needle moves on a color-coded, calibrated scale to quickly identify 'good' (green), 'low' (yellow), and 'replace/recharge' (red) battery status.

• Easy-to-read color-coded display with "Good", "Low" and "Replace/Recharge" indicators
• Test standard and rechargeable batteries: 9V, AA, AAA, C, D, 1.5V Button Type
• Compact design
• No batteries required to operate
• Ergonomic battery holder

User questions & answers

• Earth Resistance：Range:0.01Ω~2000Ω Resolution:0.01Ω Accuracy:±2%rdg±3dgt
• Earth Voltage：Range:0~600V AC Resolution:1V Accuracy:±2%rdg±3dgt
• Power Supply：DC 7.4V 2600mAh rechargeable lithium battery
• Tester Dimension：280mm(L)×260mm(W)×160mm(H)
• Measuring Method：Earth ground resistance: rated current change-pole method, measurement current 3mA Max,820Hz; Earth Voltage: average value rectification

Product description

The Gemoro Ultratester 3 Diamond and Moissanite Tester is the newest Third Generation tester designed for better testing sensitivity than previous generations. Specifically tests for Diamonds, Moissanites, and White Sapphires. Tester has a fast warm up time and has different glowing lights for quick identification: GREEN = Diamond BLUE = Moissanite PINK = Sapphire RED = Metal Alert Designed to be ergonomic, resting comfortably in your hand. Built in are finger grip pads for ease of use. The tester is covered with GemOro's exclusive rubberized paint to give you superior grip. Gemoro has thought out this product providing Auto-Off to preserve your battery life. You may also choose to power the tester by the Micro-USB, the included 3 AAA rechargeable NiMH Batteries or you may substitute 3 AAA Alkaline batteries. The tester tip is a Precision Retractable Probe-tip with enhanced durability.

• INCLUDES: NiMH rechargeable batteries, AC adapter/charger, loose stone holder, and compact rubberized portable storage case
• Identifies, Detects and Separates Diamond from CZ and Moissanite
• Glowing light pipe / probe tip cone / ring tone for quick stone identification GREEN = Diamond, BLUE = Moissanite, PINK = Sapphire, RED = Metal Alert
• Precision retractable probe-tip with enhanced durability and a Two year probe tip warranty
• Lifetime Limited Replacement Warranty on the tester

Product description

Batteries are not included

• This battery storage case easily stores and organizes batteries, can hold up to 93 batteries, 45 x AA batteries, 25 x AAA batteries, 8 x C batteries, 6 x D batteries, 4 x 9V batteries, 5 batteries button
• Battery organizer and tester design, easily check if the batteries are good, it can test different types of batteries, even rechargeable ones. A must buy for anyone who uses regular or rechargeable batteries on a regular basis
• Battery tester is removable, making sure to slide the tester into the slots on the organizer to keep it secured in place
• Mount it on wall or in your tool cabinet to save your drawer space, easy for you to see what you need, Mounting hardware is included
• This is designed with clear cover, made it more safe. Please notice: batteries are not included..

User questions & answers

Product description

The digital ground resistance tester model 4630 performs ground resistance and soil resistivity tests. This direct reading testers measures from 0 to 2000ohms, and is auto-ranging, so it automatically seeks outs the optimum measurement range. The model 4630 is rugged, easy-to-use and is ideal for maintenance crews performing numerous tests. It exceeds mechanical and safety specifications for shock, vibration and drop tests called out in IEC standards. It is designed to reject high levels of interference, so it can be used under difficult conditions such as high stray currents that normally affect accuracy. The Model 4630 is powered by 9.6V, 3.5 Ah NiMH rechargeable batteries. A built-in recharge circuit, powered from 120/230V 50/60Hz line, also provides for testing while recharging. Extremely simple to operate: connect - press - read. LED on faceplate informs operator of high input noise, high auxiliary rod resistance and fault connections. AC powered with rechargeable NiMH batteries. Rugged, dustproof and rainproof field case. Can also be used for continuity tests on bonding. Color-coded terminals. 3-Point measurements of resistance to ground of ground rods and grids. 3-Point measurements are generally used when the electrode or grid can be easily disconnected, if corrosion is suspected, or in circumstances where ground faults are unlikely to occur. 4-Point tests or soil resistivity measurements. Locating areas of lowest soil resistivity is essential for achieving an economical grounding installation. Touch potential measurements, an alternative to 3-Point tests in evaluating electrical safety. This test is recommended when the ground cannot be disconnected, where ground faults are highly likely to occur, or when the "footprint" of grounded equipment is comparable to the size of the ground to be tested. Measures 10-51/64" length by 9-11/16" width by 5" depth. Storage temperature: -40 to 158 degree F. Double insulation. CE mark.

• Measures soil resistivity (4-Point) method
• Measures ground resistance (2- and 3-point) fall-of-potential method
• Step voltage tests and touch potential measurements
• Auto-ranging: automatically selects the optimum range
• Designed to reject high levels of noise interference

User questions & answers

Product description

• Standard battery & rechargeable battery storage box made from robust plastic: There is space for up to 24 AA, 16 AAA and 4 9V PP3 block-style standard/rechargeable batteries in the high quality storage box. The batteries are always tidily organised and ideally protected
• Protection from short-circuits, unintended discharge and dirt: The robust plastic lid of the battery box provides ideal protection from moisture and dust as well as from short-circuits and mechanical stresses for the batteries or rechargeable batteries.
• Secure closure and high quality workmanship: Best materials and high quality ensure that you will be happy with your box for a long time. The light and sturdy container opens with a hand fastener.
• The sturdy battery box can be fastened to the wall with the practical hanging eyes (2 screws and wall plugs included).
• 2 years manufacturer's guarantee from ANSMANN Germany.

Product description

Don't throw away Good batteries. Test them first. The portable battery tested by La Crosse tests one battery at a time. Test rechargeable or alkaline batteries in the following sizes: AAA, AA, C, D and 9V, the compact size allows you to carry the tester with you on the go in a purse, camera bag, luggage or backpack. Simple operation: Insert 1 battery and press down on the tester to check battery strength.

• Test rechargeable and alkaline batteries
• Condition indicator
• Works on: aaa, aa, c, d, 9v batteries ni-mh and ni-cd batteries
• Portable Tester
• 2-year limited warranty

User questions & answers

Product description

Specification:



Color: Green

Material: Plastic, lightweight

Dimension: about 3.85x2.16x1.1in / 98x55x28mm



Features:



A great gadget for instant testing of your battery capacity, can check button cell battery's power.

Simply place the side down in the correct sized socket, the meter will show you the batteries condition.

Red Zone, it has run out is nearly running out, Yellow Zone, battery is used but still current, Green Zone battery is in good health or full condition.

This tester will fit most 1.5v and 3v button batteries and will indicate the batteries condition.Watch Button Battery testerWatch Button Battery tester.



Package:1 x Button Battery Checker



Usage Description:



When the pointer point at red district, indicate the battery is in a low power condition, you need to replace;

When the pointer point at yellow district, indicate the battery is in a using condition, you can still to use it;

When the pointer point at green district, indicate the battery is in a good condition, you needn't change.



Note:



1. The battery checker is only for Button Cell.

2. Light shooting and differnent displays may cause the color of the item in the picture a little different from the real thing.The measurement allowed error is +/- 1-3 cm.

• Designed for most common watch coin cell button batteries.
• A great gadget for instant testing of your battery capacity, can check button cell battery's power.
• Simply place the side down in the correct sized socket, the meter will show you the batteries condition.
• This tester will fit most 1.5v and 3v button batteries and will indicate the batteries condition.Watch Button Battery testerWatch Button Battery tester.
• Red Zone, it has run out is nearly running out, Yellow Zone, battery is used but still current, Green Zone battery is in good health or full condition.

User questions & answers

Product description

Great Item to eliminate your cluttered drawers and closets. Helps keep your batteries neat and organized! Also includes a battery Tester that you can easily remove. The tester doesn't require any batteries for operation. It works on the power of the battery you are testing! You can store it conveniently in your drawer, closet or you can mount it on the wall. Stores up to 93 Batteries in various sizes! Including 45 AA, 25 AAA, 4 9 volt, 8 C, 6 D and a "swing drawer" For 5 flat batteries.

• Made of durable plastic material! Helps keep your batteries organized and neatly stored
• Store it flat in a drawer or closet or mount it on the wall. Features a hinged clear cover
• Includes a removable battery tester that doesn't require a battery
• Holds up to 93 different size batteries; 45 AA, 25 AAA, 4 9 volt, 8 C, 6 D and 5 flat batteries
• Measurement in inches; 7W x 12L x 2. 5H

User questions & answers

Product description

Amprobe products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools undergo rigorous testing to ensure full compliance with the latest IEC and CE safety regulations in Fluke Safety labs for quality and safety you can trust.

• Easy-to-read color-coded display with "Good", "Low" and "Replace/Recharge" indicators
• Test standard and rechargeable batteries: 9V, AA, AAA, C, D, 1.5V Button Type
• No batteries required to operate

User questions & answers

Product features

Amprobe BAT-250 Battery Tester

Battery failure is one of the most common causes for sensor or instrument failure. The BAT-250 Battery Tester indicates the amount of charge remaining in standard and rechargeable batteries. The analog display needle moves on a color-coded, calibrated scale to quickly identify 'good' (green), 'low' (yellow), and 'replace/recharge' (red) battery status. The BAT-250 tests 9 V, AA, AAA, C, D and 1.5 V Button Type batteries. The tester does not require any internal batteries to operate.

Ergonomic Design

Shape of the case contours to your hand for comfortable measurements.

New Side Cradle

Side cradle holds batteries securely in place during testing.

High-Quality 9 V Contacts

New high-quality 9 V contacts make tests more straight forward and error-free.

Adjusted Display Orientation

The display orientation has been adjusted for easier reading.

Amprobe builds rugged, reliable test and measurement tools

With over 500 products worldwide, Amprobe is a trusted manufacturer of electrical test tools for industrial, commercial and residential applications. Our products range from an extensive line of clamp meters and digital multimeters to industry-specific tools for residential/commercial electricians, HVAC/R technicians, utilities and industrial maintenance professionals. All Amprobe tools are designed and supported by Fluke engineers.