12 best motion light switchs

Product description

Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turns the lights on when you enter the room and off when you leave
• Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
• Optional: senses daylight so lights do not turn on when there is enough natural light in the room
• Programmable time-out of lights - 1, 5, 15 or 30 minutes
• Works with all bulbs types; up to 250-Watt incandescent, halogen, electronic low voltage 200-Watt magnetic low voltage 150-Watt CFL/LED 2 Amp ballasts
• Single-pole only; great for small rooms like kitchens, laundry rooms and closets
• Installs in as little as 15 minutes; no neutral required
• Includes maestro sensor switch; coordinating wallplate sold separately

User questions & answers

Question:	How do I know if I need this 250W or the similar 600W switch? Are they interchangeable
Answer:	Depends on use. Lights and Ceiling fans, 250w is fine. If you have a Electric ceiling heater That requires more watts, then the 600w I would use. Hope this helps.
Question:	Will the motion sensor be set off by a small (toy size - 10 lbs) dog
Answer:	I have mine installed in a small walk-in (6 ft x 5 ft) closet and my 10 lb cat triggers it all the time, kind of annoying when it happens at 1 am. I just close the door to preven this from happening.
Question:	Will this work as... Enter room and I manually turn on the light and then the unit automatically turns off the light after a set time of inactivity? I only want it to turn off the light
Answer:	Follow up question on the previous answer....So if the unit turns off the light, is the actual switch toggled back to the "off" position? So that the next time someone walks in the door, they have to again toggle the switch back to the "on" position?
Question:	I don't get the,"No neutral required." A neutral is always required. What am I missing here
Answer:	I was an electrical engineer for Lutron back in the 1980's. Many dimmers and electronic switches like this one do not require a neutral wire to work. This is not a mechanical switch but an electronic one. It uses a silicon switching device called a triac which turns the light on and off 120 times per second, just like every dimmer ever made. During the brief period 120 times/second when the triac is off, the device draws a small amount of power through the light bulbs it controls, and uses this small amount of power to charge a capacitor, which you can think of as a rechargeable battery. Thus there are many wallbox products, such as most dimmers, that do not require a neutral wire to operate. Nor does it put any power intentionally to ground, which would be against the electrical code and thus could not be sold. The reason other companies require a neutral wire is because they were not designed by companies that also make dimmers as their engineers probably do not realize the device can be designed to draw sufficient power using a triac instead they use a relay, which would produce an audible click when switched on, where as a triac device would make no sounds when turning on and off. Hope this helps.
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Lutron Motion Sensor Switch

Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy and add simple automation to your home.

Garage

Lutron sensors are great when your hands are full and you can't easily reach the light switch.

Laundry Room

It's laundry day and clothes are piled high. Sensors installed in the laundry room gives you one less thing to worry about.

Kids Bedroom

Do you have forgetful children? Install a motion sensor and never worry about your kids leaving the lights on again.

Product description

A Versatile Motion Sensitive Light Switch That Can Save You Energy

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off from 5 minutes to 30 minutes of inactivity. Most importantly, you also have the choice of “Manual On” or “Automatic On”. Manual On is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Automatic On is ideal for bathrooms, closets and other rarely used rooms.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It also prevents teenagers from forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’s dozens of uses, all over the home.

100% Money Back Guarantee

If you aren’t completely satisfied, for any reason at all, simply send it back to us within 30 days and we’ll give you a full refund – no questions asked.

Start Saving Energy and Make Life Easier – Pick Up This Motion Sensitive Light Switch Today

• NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility.
• SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
• ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.
• 100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you aren’t completely satisfied with it, for any reason at all, simply send it back to us for a full refund – no hassles, no delays and no questions asked.
• FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.

User questions & answers

Question:	Hello, does this work with LED lights
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Will this work with fluorescent light fixtures
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	anyone know how many amps this can handle
Answer:	yes
Question:	I want to install this in my foyer. Will this sense movement from second floor when coming the downstairs
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

C1 Motion Sensor Light Switch (Single Pole)

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It assists you when forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’re dozens of uses, all over the home or office.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity and level of natural light, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off at preset intervals of 15 seconds (Test), 1 minutes, 5 minutes, 15 minutes, 30 minutes of inactivity. Most importantly, you also have the choice of Vacancy Mode (Manually turn on the light) or Occupancy Mode (Automatic turn on the light at detection of motion). Vacancy Mode (Manual) is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Occupancy Mode (Automatic) is ideal for bathrooms, closets and other rarely used rooms.

Product description

TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes.



Passive Infrared, PIR sensor detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft., 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement.



With Top Greener's TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the day time even when motion is detected.

Use the TSOS5 as occupancy motion detector sensor, or set it to be in manual OFF or ON mode just like your standard ON/OFF.This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER's TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more!



Specifications:



CFL/LED: 150-Watt @ 120 VAC

Incandescent/Halogen: 500-Watt @ 120 VAC

Fluorescent: 500-Volt Amp @ 120 VAC

Motor: 1/8HP @ 120 VAC

Coverage: 180 degrees, 707 square feet

Single-Pole use only

Neutral wire required

• 2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
• AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
• Max Sensor Coverage Area 707 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%
• Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
• *PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*

User questions & answers

Question:	Currently i have single pole manual switch which says 15amp on it. can i replace with this motion sensor switch
Answer:	In AC circuits (house wiring), white is neutral, black or red is hot, green or bare copper is ground. In many wall switches there is only a black wire on both sides of the switch. This sensor will not work with those, you will need a sensor that doesn't require a neutral (white) wire. In DC circuits, black is usually (not always) ground. There is no neutral in DC circuits. Cars and trucks have DC circuits.
Question:	Can I use in parallel of two of such switches? So if either of them turns on, the light will be on? when off/no motion, load is neutral or floating
Answer:	Yes, it will fit in a two gang wall plate.
Question:	what is a neutral wire
Answer:	Yes. You can share your device to your family member. The package includes user manual which will explain the steps.
Question:	Does it fit a standard 2-gang wallplate
Answer:	Yes it is a simple toggle manual switch

Product features

TopGreener TSOS5-W In Wall PIR Motion Sensor Light Switch

Add simple light automation to your home with the TSOS5 Motion Sensor Switch. The TSOS5 is an occupancy sensor with the addition of an always-on switch. This sensor switch automatically turns on the lights when you enter a room and automatically turns off the lights when motion is no longer detected. Enjoy savings on your energy bill, and add convenience to your home with this automatic lighting control.

On/Off Switch & Sensor? Best of Both Worlds!

The TSOS5 is a sensor switch that has the best of both worlds. With the addition of an always-on mode, users can override the sensor and keep the lights on until they are ready to switch modes. In auto mode, the TSOS5 works as an occupancy sensor that automatically turns lights on and off based on the motion detected in a room, providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine. Avoid fumbling in the dark or entering a room with your hands full searching for the light switch. Save on electrical costs and have peace of mind knowing that your lights will always turn off (when on sensor mode).

3 Operation Modes: On, Off, Auto

The TSOS5 features simple controls and easy-to-use settings. A slider switch on the face of the unit allows you to easily switch between Auto, On, and Off modes. Behind the cover plate, settings for the time delay, range, and light level are easily accessible and adjustable. Simply use a flathead screwdriver to turn each knob to the setting you desire!

Innovative PIR Technology

The TSOS5 uses passive infrared (PIR) technology to detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. Enjoy energy saving benefits by ensuring lights are always accurately turned off.

Sensor Override Feature

Use the TSOS5 as an occupancy motion detector sensor, or set it to Off or On mode to override the sensor function. A neutral wire is required for installation. For single-pole applications only.

• ✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.
• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.

Product features

ELEGRP LIGHTING CONTROLS

ELEGANT ART

Light up you home in the gentle night.

MULTIPLE SETTING MODES - Features multiple setting modes for different usage scenarios at home

—————————————————————————————————————————————————————————————————————

Set It Into An Occupancy Sensor Switch

OCC Mode: Automatic ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity to “1”, “2” or "3" as desired. DO NOT set the LIGHT to " • ".

—————————————————————————————————————————————————————————————————————

Set It Into A Vacancy Sensor Switch

VAC Mode: Manual ON & Automatic OFF

1. Set delay TIME to " • " , "0", “1” , “2” or "3" as desired.
2. Set human body SENSOR sensitivity as desired.
3. Set LIGHT sensitivity fully counterclockwise to " • " to disable automatic ON function.

The device will turn on the loads manually only and turn off the loads automatically when the time delay elapses.

—————————————————————————————————————————————————————————————————————

LARGE COVERAGE

The sensor detects motion in areas up to 900 square feet and up to 35 feet from the sensor, ideal for porch, closet, garage, hallway, stairs, basement, pantry and laundry room, etc.

Tips: Install the sensor switch about 4 feet from the floor to get better experience.

HANDS FREE LIGHT CONTROL

PRODUCT SPECIFICATION

Input Rating: 120 - 277V, 60Hz

Lamp Type: 300W LED, 300W CFL, 600W Incandescent

Switch Type: Single Pole / Two Location Control

Wire Gauge: #14 - #12 AWG

Wiring Type: Terminal cap

Operating Temperature: 32℉ to 104℉ (0℃ to 40℃)

Product Size: 4.17x1.73x1.77" (106x44x45mm)

Remark: Installation Instruction Included

• 🌟 100% REFUND GUARANTEE: Welcome order ECOELER Sensor Switch products. If you don't absolutely love our product, let us know and receive a full, no questions asked refund. During used, if our Motion sensors is broken, don’t working, please contact us, we will refund or pay a new one to you.
• 🌟 NEUTRAL WIRE REQUIRED, The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Allowing the lights to turn on from multiple switch locations in the room. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.
• 🌟  VERSATILE SETTINGS: The motion detector light switch features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.
• 🌟 OCC / VAC OPTION: The homekit light switch with Occupancy mode (Auto ON / OFF) and Vacancy mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fan accidentally left on all day.
• 🌟 CERTIFICATION: Smart motion sensor switch have UL Certified, FCC Listed and California Title 24 Compliant. Multiple certifications, Let the customers be assured.

User questions & answers

Question:	Does it come with accompanying wall plate
Answer:	I don't recall whether or not they do. However deco wall plates are low priced and available at all hardware stores. I am an electrician so I carry a few boxes of ten plates in my truck at all times. So if they didn't I grabbed a few to put on with the switches.
Question:	Can it be onstallwd with a 2nd swirch for a vent in a varhroom
Answer:	You could install one on the vent fan switch in the bathroom and have a separate one in a dual wall plate connected the the lights.. or wire both to the single switch.
Question:	Could this switch be activated by a cat if mounted at standard switch height
Answer:	Yes. It can be activated by a giant cat.
Question:	My box has two sets of hot, neutral, and ground wires. will this switch work? if yes, what is the setup
Answer:	Yes. If you test those two sets of wires with your multimeter, you'll likely see that one of the black wires is actually being turned on and off by the current light switch. If so, connect that black wire to this switch's red wire. Connect your always-hot black wire to this switch's black wire. Connect all three white wires together. Connect all three ground wires together.

Product description

TOPGREENER TDOS5 Motion Sensor Switch automatically turns lights and motors on and off according to the motion (occupancy/vacancy) detected in the room. There are two modes: Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode lights are automatically turned on when you enter a room and automatically turned off after the room is vacant. This is especially convenient when entering a room with your hands full, such as an entryway, laundry room, garage, etc. Avoid fumbling in the dark for the light switch or tripping when entering a dark room. Having the lights automatically turn on will deter thieves and allow a surveillance camera to capture clear footage. Use OCC mode for the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy mode is another option to choose from, which requires manually turning the light on and automatically turns the light off when the room is vacant. VAC mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. This ensures the most energy savings because the user decides when to turn the lights on. The TDOS5 sensor switch provides reliable performance. When no motion is detected within the set time delay the load will turn off automatically. The PIR sensor switch's visually aesthetic design and broad compatibility make it a good choice for you to upgrade your home. Variable time delay from 15 seconds to 30 minutes allows users to choose their preferred option. This occupancy sensor switch is only for single pole use. A neutral wire is required for installation.

• 2-pack motion sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
• Sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
• Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
• Light switch sensor features adjustable settings; variable time delay from 15 sec (Test) to 30 min; adjustable range
• NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view; 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; single pole only; 2x wall plates included; CA Title 20 & 24 compliant; UL listed; 1-year

User questions & answers

Question:	Are they only available in white
Answer:	I have only seen them in white so far.
Question:	does it work with two-way switch
Answer:	I don't know. We have it on a single switch and it works great
Question:	My wire includes a black, a white and a copper. How do I connect them to the switch which has 4 wires
Answer:	It seems that your neutral wire is missing. Please check the back of your box to see if there is a bundle of wires, which should be your neutral. Otherwise, you will need the TDOS5-J model, which does not require neutral but requires a ground: https://www.amazon.com/dp/B01IO1M5WW?ref=myi_title_dp
Question:	What is the "Light" adjustment dial for? Is this a dimmer adjustment for the connected fixture
Answer:	The light setting can be used to keep the switch from turning on if the ambient light is above the set level. For example if you use this switch on a patio or lanai and only want the motion to turn on a light if it's dark outside; you would turn this dial all the way and then slowly back it down until the light comes on at the ambient light level you desire.

Product features

TOPGREENER TDOS5 PIR Motion Sensor Switch, 2-PACK, White

The TOPGREENER TDOS5-W combines occupancy and vacancy sensors into one motion sensor switch for energy efficiency, security, and convenience. The 2-in-1 motion sensor detects occupancy and vacancy in a room to automatically turn lights or fans on and off. Enjoy hands-free convenience by never having to fumble in the dark looking for the switch. Give yourself one less thing to worry about by having the peace of mind that your lights will always automatically shut off.

A neutral wire is required for this switch to operate correctly.

Energy Savings

Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights accidentally left on all day.

Security & Safety

The TDOS5 is the ideal choice for seniors, children, and employees when it comes to safety. Making sure lights automatically turn on allows occupants to see where they are going, improves visibility in an otherwise dark room, and prevents accidents. PIR motion sensors turn lights on, allowing security cameras to capture clearer footage of your home or office.

Convenience

Keep it hands-free as you walk into your home with groceries or into the laundry room or closet with a handful of laundry without having to manually turn your lights on or off.

Custom Settings

With advanced technology packed into intuitive and easy-to-use settings, you can easily adjust the length of time lights will stay on or how sensitive the sensor is to motion. Make your home smarter in one switch!

Occupancy (OCC) Mode: Detects occupancy and vacancy in a room for full automation of lights, fans, or other loads. The sensor will automatically turn On/Off when triggered by motion. When no motion is detected within the delay time, the lights will turn off automatically.

Vacancy (VAC) Mode: Detects vacancy in a room to automatically turn lights off. Lights are manually turned on when entering the room. When no motion is detected within the delay time, the lights will turn off automatically.

Product description

Leviton IPS02-1LW 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, White. Compatible with Decora screwless snap-on wallplates (sold separately).

• Automatic ON/Automatic OFF provides 180 Degree field of view and 900 square feet of coverage
• 300W Incandescent / Halogen, 150W LED / CFL, 200VA Fluorescent, 1/6HP Motor loads
• Fits in standard wallbox and replaces single pole wall switch, no Neutral wire required for installation but ground wire is required
• Five year limited warranty

User questions & answers

Question:	Can anyone suggest a wall mount single pole p.i.r. switch with no manual "off" override? I have seen these in hospital restrooms with no visibl brand
Answer:	LEVITON MAKES 1
Question:	Anyone else finding the light ON without any motion? I open the garage door and see the light on at random times day/night. Garage is empty
Answer:	Mine also comes on when the HVAC starts or stops. I've also noticed that it comes on at night when I open my bedroom door. The door is completely out of sight from the switch. I can only imagine that the switch has an extremely sensitive pressure sensor in it also. I think I'll be replacing it since I think it comes on / off several times a day when we're not at home and the whole point was to try to save energy!
Question:	Will this completely turn off LED lights or is the light still slightly on even if the switch it off
Answer:	You must have ground connected or the LED light will stay slightly on. If you don't have a ground, it won't work correctly with LED bulb.
Question:	I don't want anyone to be able to turn off the light manually, is that possible
Answer:	It is not designed to do that but you can easily work around it. Remove the front face and on the bottom of the removed face are 4 black protrusions. Three are necessary clips but in the middle is a shorter rounded protrusion that does the pushing of the switch. With a nail cutter, or small wire cutter, flush cutter or the side of a small file hack off about 1 millimeter of that nub. Make sure the light in on (push the round black pad in the switch) on put this modified switch conve back on and test it to see if you removed enouch of the "pusher" that it will not activate when you push the button.

Product description

TOPGREENER TSOS5-W Passive Infrared In-Wall Motion Sensor Light Switch, you can enjoy great savings and convenience with lighting control. When you put the slide switch button to AUTO mode, TSOS5 PIR motion sensor will detect motion and turn on load such as a lights, fans, motors, or heaters automatically; and turn off the load when no motion is sensed for preset delay time. Variable delay time between 15 seconds, 10 minutes, 20 minutes and 30 minutes. Passive Infrared, PIR, sensor detects occupancy by sensing the difference between heat emitted from the human body in motion and background space. This occupancy sensor has a maximum coverage area up to 707 sq. ft. , 180-degree field of view; sensitivity level is adjustable in 4 positions from 30% to 100%. To provide adequate coverage with-in a space, motion activated sensors utilize a unique Fresnel lens which divides the coverage area into zones, thus enhancing the detection of small movement. With Top Greener's TSOS5 in-wall motion sensor light switch, you will enjoy the energy efficient benefits and avoid energy waste by preventing lights to turn on in the daytime even when motion is detected. Use the TSOS5 as occupancy motion detector sensor, or set it on manual OFF or ON mode just like your standard ON/OFF switch. This operation can be done easily by sliding the sliding switch on the front of the motion sensor. TOPGREENER's TSOS5 motion sensor light switch is perfect for areas like your hallway, stairway, closet, bathroom garage, and more! Specifications: CFL/LED: 150-Watt @ 120 VAC; Incandescent/Halogen: 500-Watt @ 120 VAC; Fluorescent: 500-Volt Amp @ 120 VAC; Motor: 1/8HP @ 120 VAC; Coverage: 180 degrees, 707 square feet; Single-Pole use only; Neutral wire required

• Motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room
• AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch
• Max sensor coverage area 707 sq. ft., 180º field of view. Motion sensor wall switch features adjustable range and sensitivity from 30% to 100%
• Occupancy sensor light switch features variable time delay from 15 sec (test mode) to 30 min
• Neutral wire required for installation*PLEASE CHECK WITH A QUALIFIED ELECTRICIAN TO DETERMINE IF YOU HAVE THE PROPER WIRING*. 120VAC, CFL/LED: 150W, Incandescent/Halogen: 500W, Motor: 1/8 HP. Operating temperature (32 – 131°F). Single pole use only. Wall plate sold separately. CA Title 20 compliant. UL listed. 1-year
• Needs preinstalled Neutral Wire for the product to work.

User questions & answers

Question:	Connected all four. Works manually, but it does not detect motion. Is it possible the wiring is screwed up or must it be defective switch
Answer:	Please make sure that the white wire on the switch is only connected to the neutral in your junction box. The neutral is usually a bundle of white wires in the box and is required for the sensor to work properly. Next, please make sure that the hot and load aren't reversely connected. If reversely connected, the sensor component won't work.
Question:	Will this work with led bulbs (10w or less) and fluorescent tubes (without humming
Answer:	It works with LED. Under 10W? Can't think of why not. Mine runs 90W with no flicker or hum. LED hum is usually caused by a lower quality dimmer set to dim. This is just a toggle switch. No dimmer. Most likely no hum.
Question:	Is the off and on work like normal switch. if you turn it to on, it won't auto turn off after you leave, correct
Answer:	That is correct. The "Off" and "On" settings are AWAYS off or ALWAYS on.
Question:	Does it draw any power when it is in manual off mode
Answer:	The switch draws no power in manual OFF and manual ON. In AUTO it always uses 0.02 Amps x 0.15 power factor x 120V = 0.36 watts, which is also about $0.36 in electricity per year if always at AUTO. These numbers are from my Kill A Watt http://www.amazon.com/P3-P4400-Electricity-Usage-Monitor/dp/B00009MDBU/ref=sr_1_1?ie=UTF8&qid=1453330013&sr=8-1&keywords=kill-a-watt

Product features

TopGreener TSOS5-W In Wall PIR Motion Sensor Light Switch

Add simple light automation to your home with the TSOS5 Motion Sensor Switch. The TSOS5 is an occupancy sensor with the addition of an always-on switch. This sensor switch automatically turns on the lights when you enter a room and automatically turns off the lights when motion is no longer detected. Enjoy savings on your energy bill, and add convenience to your home with this automatic lighting control.

On/Off Switch & Sensor? Best of Both Worlds!

The TSOS5 is a sensor switch that has the best of both worlds. With the addition of an always-on mode, users can override the sensor and keep the lights on until they are ready to switch modes. In auto mode, the TSOS5 works as an occupancy sensor that automatically turns lights on and off based on the motion detected in a room, providing simple automation and keeping you 100% hands-free. Add convenience to your daily routine. Avoid fumbling in the dark or entering a room with your hands full searching for the light switch. Save on electrical costs and have peace of mind knowing that your lights will always turn off (when on sensor mode).

3 Operation Modes: On, Off, Auto

The TSOS5 features simple controls and easy-to-use settings. A slider switch on the face of the unit allows you to easily switch between Auto, On, and Off modes. Behind the cover plate, settings for the time delay, range, and light level are easily accessible and adjustable. Simply use a flathead screwdriver to turn each knob to the setting you desire!

Innovative PIR Technology

The TSOS5 uses passive infrared (PIR) technology to detect occupancy by sensing the difference between heat emitted from the human body in motion and background space. Enjoy energy saving benefits by ensuring lights are always accurately turned off.

Sensor Override Feature

Use the TSOS5 as an occupancy motion detector sensor, or set it to Off or On mode to override the sensor function. A neutral wire is required for installation. For single-pole applications only. Wall plate sold separately.

Product description

As there is a photosensitive internal, switch only allows the light switch to be activated on in dark condition.

So when you test the switch on AUTO function in a very bright environment (Ambient Light: > 5-10LUX) , It won’t work ( Even movement sensed).

In this condition, Please do Cover the detection area with your hand for about 30 seconds then test again.



Specification



Input Voltage :110V/AC-240V/AC

Power Frequency :50/60Hz

Detection Range :180 degree

Detection Distance :9m max(less than 24 Celsius)

Ambient Light:Work in LUX less than 20LUX (switch on the Auto position)



Time-Delay



Min :10sec(more or less) Max:30min

Working temperature :20~40 Celsius

Working Humidity : higher than 93% RH



Rated Load :

1200W/220v (incandescent lamp)

300W/220V (energy-saving lamp)

400W/110V (incandescent lamp)

400W/110V (incandescent lamp)

Power Consumption :

0.45W(work)

0.1W (static)



Detection Motion Speed :0.6~1.5m/s

Size :70mm*115mm*35mm

Note

Time -delay is added continually: When it receives the second in induction signals after the first induction, it will compute time once more on the rest of the first time-delay basic (set time).

Currently the temperature becomes lower, the sensitivity of the sensor would become higher, so the probability of false triggering the sensor turning on increases. We recommend to reduce the Lux value appropriately to reduce triggering motion sensor. If the switch works error, please don’t worry. Any questions or needs welcome to contact us.

Attention:

1.Don't exposed to direct sun light or lighting, big wind, near a heater or air condition.

2.Don't fix it at a place where there are obstructing material (e.g. Glass, dense clothes) which IR cannot get though.

3.Don't fix it in strong shock or vibration environment.

• 【PIR motion light sensor】:This device can detect motion from a heat-emitting source (such a person) within its field-of-views and automatically turns lights ON and OFF.
• 【Two mode adjustable】:The occupancy sensor switch can also be “ON” mode, in which you light turn on always. A sensor automatically shuts the lights off when the room is vacant in “Auto” mode.Auto mode is great for hallway,stairs,or bathroom.
• 【Saving energy & money】:Motion sensor switch can identify when daylight is in the room.The switch only turns the lights on when they're needed.Saving your money.
• 【Neutral wire required】:Three wires (Black, Green, and Red,). Black wire goes to Hot; Green wire goes to Natural; Red wire goes to the hot end of your light (the load). Then the other end of the light and the green wire of the switch go to the Natural.
• 【Time Delay】:Adjustable Time-Delay for customizing: Min: 10sec±3sec ; Max:7min±2min (The load will stay on for the time you set, then go out).Adjustable Sensitivity; Light Level Sensing; 180° Field View. The wall switch is suitable for indoor use only,Easy to install. If there are some questions about installation, please check the wiring diagram or contact us.

User questions & answers

Question:	What is the timer duration ( on to off)? What is the max amp
Answer:	Dear Vincent,Thank you for interested in our product, this is a delay time adjustable product. The Min delay time is 30s, and the max delay time is 5 min. Besides, the max amp is 5A. Hope it's helpful for you.Have a nice day. Yours sincerely,Makayla
Question:	Does it work with non-dimmable LED bulbs
Answer:	Will this work w led lights?
Question:	Is this a single pole switch
Answer:	Yes.Single pole switch.
Question:	Do you know the frequency that these operate at? 50 or 60hz or both
Answer:	Anything in America runs off of 60 Hz anything in Europe runs off 50 Hz

Product description

Automatically turn lights on and off with this wall-mounted switch. turns lights on when anyone enters the room and turns them off when vacant. Detects motions of room occupants. Uses Advanced XCT sensing technology. up to 900 sq ft of coverage. Also features "Ambient Light Detect" mode: lights won't turn on if there is enough natural light present; user may still manually turn lights on. Works with all bulb types. Requires ground wire.

Conserve energy and automate the lights in your home with the Maestro occupancy sensor switch from Lutron Electronics. This wall-mounted switch automatically turns the lights on when you enter the room and turns them off after you leave. It's a great convenience when your hands are full and you can't reach the light switch, and it means you never have to worry about leaving the lights on by mistake. This version of the Maestro occupancy sensor switch is ideal for large rooms such as garages, basements, and living rooms.

Detects Fine Motions to Keep Lights On

The Maestro occupancy sensor switch features proprietary Advanced XCT sensing technology, which detects fine motions such as reading or working at a desk. This ensures that the lights do not turn off inadvertently when the room is occupied. The switch reliably senses motion up to 30 feet away for up to 900 square feet of coverage. In addition, it's designed to learn your personal light preference based on your use of the product.

Senses Daylight to Turn On Only When Needed

The Maestro occupancy sensor switch is equipped with patented ambient light detection that can identify when daylight is in the room. As a result, the switch only turns the lights on when they're needed.

Elegant Design to Complement Your Home Decor

Keeping the sleek design of the Maestro family, Lutron sensors are made to match the decor of any room in your home. The Maestro occupancy sensor switch is available in four colors: Almond, Ivory, Light Almond, and White.

Optional Vacancy Mode with Manual On

The Maestro occupancy sensor switch can also be switched to vacancy mode, in which you manually turn the lights on when you enter a room and a sensor automatically shuts the lights off when the room is vacant. Vacancy mode is great for bedrooms, kids' rooms, or rooms with pets.

Compatibility and Installation

The Maestro occupancy sensor switch works with all bulb types, including incandescent, halogen, and electronic low voltage bulbs up to 600 watts; magnetic low voltage bulbs up to 200 watts; CFL and LED bulbs up to 150 watts; and 2 amp magnetic/electronic ballasts. It can also operate ceiling or exhaust fans up to 3 amps. No neutral wire is required. This product is for single-pole and 3-way applications only.

About Lutron Electronics

Lutron Electronics, headquartered in Coopersburg, Pennsylvania, designs and manufactures lighting controls and automated window treatments for residential and commercial applications. Lutron products save energy and make light bulbs last longer, making them an addition to the home and office. Lutron estimates that the installed base of its products saves the nation nearly 10 billion kWh of electricity, or approximately $1 billion in utility costs per year.

What's in the Box

One Maestro occupancy sensor switch.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turn lights on and off based on room occupancy
• Uses Advanced XCT sensing technology, offering the most reliable on/off performance with up to 900 square feet coverage
• Works with all bulb types
• Up to 600 W incandescent, halogen, electronic low voltage; 450 W magnetic low voltage; 360 W CFL/ LED, 5 amp ballasts; 3 amp fans
• Requires ground wire

User questions & answers

Question:	I have tried similar ones. I have a basement install at top stairs but when I come back up later the beam is flat and does not pick me up will this
Answer:	No. I have two of these, one at the top and one at the bottom of the stairs to compensate. They make an audible clicking sound and I can tell that the one at the top of the stairs does not turn on until my head comes close to horizontal with the switch.
Question:	In a 3-way application, what happens when you turn on the regular switch? Does it stay on or go off after a time
Answer:	Depends on how you have the Lutron programmed. You can set it to turn off with ambient light along with timed turn off with out movement or just plain turn on with movement. Have 2 but probably will move the one in my office. Have it timed 3 minute with ambient light & when setting at desk reading light will turn off. Not a big deal just wave my hand in the air & it comes right back on
Question:	How do you activate the manual on option (where the light only comes on manually, but goes off automatically
Answer:	From the instruction manual:1. Press and hold the Auxiliary button.2. Release the button after the lens flashes for the second time.This places the switch in Manual On - Auto Off mode.http://www.lutron.com/TechnicalDocumentLibrary/048461.pdf
Question:	A light in hallway controlled by 2 switches. Do i need to install both light switches? or in a situation like this, how do i install it
Answer:	They have products for 2 light switches (3-way) and 3 light switches (4-way.) For these, you buy the appropriate one, then either one or two companion switches if you'd like more than one sensor. Their website will give you the model numbers and wiring instructions you need.

• ✅【Easy to install】 No neutral wire required (Grounding Wire is Required for Function) - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.
• ✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.
• ✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.
• ✅【Multiple Control】 Can be used as single-pole or 2 location control. Features multiple setting modes of Automatic or Manual ON/OFF for different usage scenarios at home. (NOT suitable for 3 way circuit)
• ✅【High Quality】 Extremely low standby power consumption. Energy saving and long operating life. Flame resistant material has reached the highest grade of 5VA. UL & CUL listed.

User questions & answers

Question:	Can this replace a switch in a double gang box? I have an under counter light and and ceiling lights. I just want tit to control the ceiling lights
Answer:	Hello, all our products are designed as per NEC standard and NEMA configuration, therefore they are compatible with all decora wall plates in the US market regardless of the number of gangs/slots of the wall plate because their slots are of the same size. Thank you for your question, have a nice day.
Question:	Does this still turn on the lights when it is day time and there is light shining in
Answer:	Not sure, I have one installed in a large walk-in closet that does not have windows. We love it, you walk in it turns on the overhead lights, you walk out and it turns the lights off in about 30 seconds.
Question:	Will this switch work with a fluorescent light?The fluorescent light you put over your kitchen sink
Answer:	Hello, this sensor switch can be worked with CFL bulbs up t0 300W. Thank you for your questions. ELEGRP Customer Service
Question:	Bought this and connected everything and it won’t turn off, manually or automatically. Can someone please help
Answer:	Hello, this problem could be caused by miswiring or ungrounding. 1) The black wire of the sensor switch shall be connected to the Hot wire and the red wire of the sensor switch shall be connected to the load. If you're not sure about the Hot wire and the Load wire in your wall box, please exchange and rewire the black wire with the red wire of the sensor switch. 2) Please also make sure the sensor switch is connected to the ground. The sensor will not function if it's false wired or un-grounde. For other questions, please contact us through Amazon's messaging center by following this link and we will be happy to help you further: https://www.amazon.com/hz/help/contact/A5AC1RKZTZD48 Thank you ELEGRP Customer Service

Product description

The TOPGREENER TDOS5-W Motion Sensor Switch automatically turns lights and loads ON and OFF according to the motion detected in the room. An easy replacement for any indoor light switch, the PIR motion sensor automates your lighting to bring your home into the modern age. The programming controls are located under the face cover of the device, and include a sensor range dial, a time delay dial, and a press-button that changes between Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode, lights are automatically turned ON when you enter a room and automatically turned OFF when the room is vacant. Alternatively, vacancy mode requires the light switch to be turned ON manually, but it will shut OFF automatically after the room is vacant for a preselected amount of time. This time delay can be easily adjusted from 15 seconds (TEST) to 30 minutes. This motion-sensing wall switch is ideal for rooms that you enter with your hands full, such as a residential entryway, walk-in closet, laundry room, garage, kitchen, or pantry. The sensor switch will also help you conserve energy by ensuring the light is never left on by mistake. This PIR sensor switch has a 180° field of view and is best suited for spaces up to 1200 square feet. This product is UL listed, Title 20 & 24 compliant, and includes a one-year warranty.

• Sensor wall switch detects motion to automatically turn lights ON and OFF based on the occupancy or vacancy in a room
• Passive Infrared (PIR) sensor detects motion with 180° field of view; advanced PIR reduces false triggers from unwanted movements
• Motion sensor wall switch features a universal wiring design with interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where
• Occupancy sensor mode (Auto ON, Auto OFF) and vacancy sensor mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs; adjustable time delay options: 15 sec (Test), 5 min, 10 min, 20 min, 30 min; change mode with the press-button located under the face of the device
• White color; 1200 square feet max coverage area, 180-degree field of view; no neutral wire required; ground wire required; 5A, 120VAC @ 60 Hz; 500W incandescent/halogen, 150W LED/CFL, 1/8HP motor rating; operating temperature 32-131ºF; compliant with Title 20 & Title 24; single-pole only; device dimensions: 2.5" W x 4.5" H x 2.5" D; UL listed; 1-year warranty

User questions & answers

Question:	Does this detect the day light so that its doesnt tuen on during day
Answer:	Yes, there is a light level setting.
Question:	Will this fit Decora wall plates
Answer:	yes it does, it also ships with a single gang white decore plate
Question:	What is power requirement? and can i connect 220VAC lighting load
Answer:	This model can not handle 220V. We have a model can handle up to 277V. Please search this model "DWOS-J-W" for details.
Question:	I tried to install this sensor but I have no idea what to do with the red wire. I bought a different sensor with a black, white and green, it worked
Answer:	The RED is the load or the wire goes to your lights. Black should go to your hot wire, which is the wire supplying the power and is always on. I bought one of these and it works great.

Product features

TOPGREENER TDOS5 PIR Motion Sensor Switch, White

The TOPGREENER TDOS5-W combines occupancy and vacancy sensors into one motion sensor switch for energy efficiency, security, and convenience. The 2-in-1 motion sensor detects occupancy and vacancy in a room to automatically turn lights or fans on and off. Enjoy hands-free convenience by never having to fumble in the dark looking for the switch. Give yourself one less thing to worry about by having the peace of mind that your lights will always automatically shut off.

A neutral wire is required for this switch to operate correctly.

Energy Savings

Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights accidentally left on all day.

Security & Safety

The TDOS5 is the ideal choice for seniors, children, and employees when it comes to safety. Making sure lights automatically turn on allows occupants to see where they are going, improves visibility in an otherwise dark room, and prevents accidents. PIR motion sensors turn lights on, allowing security cameras to capture clearer footage of your home or office.

Convenience

Keep it hands-free as you walk into your home with groceries or into the laundry room or closet with a handful of laundry without having to manually turn your lights on or off.

Custom Settings

With advanced technology packed into intuitive and easy-to-use settings, you can easily adjust the length of time lights will stay on or how sensitive the sensor is to motion. Make your home smarter in one switch!

Occupancy (OCC) Mode: Detects occupancy and vacancy in a room for full automation of lights, fans, or other loads. The sensor will automatically turn On/Off when triggered by motion. When no motion is detected within the delay time, the lights will turn off automatically.

Vacancy (VAC) Mode: Detects vacancy in a room to automatically turn lights off. Lights are manually turned on when entering the room. When no motion is detected within the delay time, the lights will turn off automatically.