12 best motion actuated switches

Product description

The product type is Weatherproof Motion Sensor Switch, Bronze. It is manufactured in China. It is manufactured by BELL.

• Package Dimensions: 14.9 H x 5.4 L x 6.2 W (centimetres)
• Package Weight: 0.168 kilograms
• Country of Origin : China
• 180° motion sensor with duration sensitivity and photocell controls

• Amazon Smart Plug works with Alexa to add voice control to any outlet.
• Certified for Humans - Struggle-free, tinker-free, stress-free. No patience needed—it's actually simple.
• Schedule lights, fans, and appliances to turn on and off automatically, or control them remotely when you’re away.
• Simple to set up and use—plug in, open the Alexa app, and start using your voice.
• Compact design keeps your second outlet free.
• No smart home hub required—set up routines and schedules through the Alexa app.

User questions & answers

Question:	Why does my smart home plug work on some outlets and not on others? It works fine with my Echo when plugged into one outlet, but not a different one
Answer:	All of the answers that suggest being on "A and B 120 volt sections" are wrong. This device works over WiFi. That old "A and B" advice is for obsolete powerline systems like X-10. Any problems are due to WiFi signal quality. The Smart Plug and Echo do NOT need to be on the same "120 volt section."
Question:	Do I need an Alexa device in the home to control the outlet while we're away
Answer:	As long as you have the app and the outlet is paired with your Alexa app, you can control it through the app (no echo device needed).
Question:	Does it work with a 5g wi-fi or is like the other one you sell that only work with a 2g wi-fi
Answer:	You probably don't want this device to use 5 ghz wi-fi, which has a limited amount of signal channels. 2 ghz wi-fi has fewer channels, running at lower speeds, and is generally conjested with traffic from your neighbor's wifi. You won't, however, notice a difference in lag for a smart plug due it is only using about 1 kilobit per second over a connectionless protocol to activate or deactivate the plug. This plug, running on the 2 ghz wi-fi, means that there is one more channel available on the 5 ghz wi-fi for a device that really needs it, like a TV or a gaming console, which tend to transmit at around 25,000 kilobits per second each.
Question:	My Keurig has a toggle switch. Will this plug work, or does the appliance have to be turned on when it is plugged into the smart plug
Answer:	I haven't even installed my smart plug yet and I can already answer this. The plug will turn it on but how would it press the button to brew? Again, I can already say it won't do that. Another answer mentioned using a switch bot. Okay. So smart plug $10-$15 plus switch bot $20 ... Dude, just go buy a coffeemaker with a clock/timer. They've been around FOREVER and will both turn themselves on and brew your coffee for you and you don't even have to make a whole pot. You can get an entire coffee maker for like $25 then use your smart plugs for something else/something that doesn't already have the ability to turn itself on/ect. :)

• Stainless Steel
• For 40 ft. & 1,400 lb. Gate ----- This product is designed for heavy-duty sliding gate up to a maximum length of 40 ft. (includes 20 ft of chain) or a maximum of weight of 1,400 lb.
• Quiet & Powerful 280W Motor ----- The integrated 280W AC motor drives the gate opener smoothly at the speed of 43 ft. /min while producing less than 56 dB noise.
• Auto-Close Feature ----- Featuring an auto-close option, this slide gate opener can be set to close in 12, 24, or 36 seconds after it opens; you can add 23 more remotes to control this system for convenience.
• 100 ft. Range ----- The complementary remote controls operate perfectly within 100 ft, so you do no get out of your car to open the gate ever again, comes with 4 buttons for open/close/stop open/close stop.
• Durable with Unparalleled Safety ----- Constructed with aluminum base, copper worm-gear for durability; CE approval for ultimate safety. RF Hopping Code Technology prevents your remote code from being accessible to others. Suitable for 110V.

Product features

DIY Lovers' Preference

• Perfect for DIY lovers, same quality but easier to install, our gate opener operates smoothly and delivers outstanding performance with the capability to open gates up to 3,300 lb. Versatile and can be upgraded with a few more functions with the compatible accessories. (Including solar power recharge, auto-stop function, emergency notification etc.)

Convenient Remote Control

• Your gate comes with 2 remote controls that can be securely matched during installation and operate the gate from distances of up to 100 ft. whether on foot or in your car. The gate opener's control system can be matched to up to 25 remotes to accommodate large families and small businesses.

Magnetic Limit Switches

• The magnetic limit switches set the gate's maximum open and closed positions and ensure safe operation. The switches automatically buffer the gate's operation and keep it from misalignment or going off the rails.

Failsafe Manual Release

• If the remote controls are not around or there's a power outage, Plan B to open the gate is your manual release keys, which easily unlock the automated gears and let you push it open by hand.

Product description

Lutron Maestro Motion Sensor Switch, No Neutral Required, 250 Watts, Single-Pole, MS-OPS2-WH, White.

From the Manufacturer

Let Lutron's Maestro Occupancy Sensor switch turn the lights on and off for you. It's a simple, easy, and low cost way to save energy and add automation to your home. Install a Maestro Sensor and lights turn on when you enter the room, and then turn off automatically after you leave. This sensor features Advanced XCT Sensing Technology which detects fines motion, such as desk activities or reading, ensuring lights do not turn off inadvertently. Equipped with ambient light detection, your sensor can detect daylight so lights don't turn on when enough natural light is in your room. Keeping the sleek design of the Maestro family, Lutron sensors will match the decor of any room in your home. Install it in the laundry room for added convenience when your hands are full, or in the garage rooms and never worry about lights being left on by mistake. Maestro Sensors works with any bulb type, including CFLs and LEDs. This switch can also be easily programmed to function as a vacancy (manual-on) sensor.

• Automatically turns the lights on when you enter the room and off when you leave
• Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently
• Optional: senses daylight so lights do not turn on when there is enough natural light in the room
• Programmable time-out of lights - 1, 5, 15 or 30 minutes
• Works with all bulbs types; up to 250-Watt incandescent, halogen, electronic low voltage 200-Watt magnetic low voltage 150-Watt CFL/LED 2 Amp ballasts
• Single-pole only; great for small rooms like kitchens, laundry rooms and closets
• Installs in as little as 15 minutes; no neutral required
• Includes maestro sensor switch; coordinating wallplate sold separately

User questions & answers

Question:	How do I know if I need this 250W or the similar 600W switch? Are they interchangeable
Answer:	Depends on use. Lights and Ceiling fans, 250w is fine. If you have a Electric ceiling heater That requires more watts, then the 600w I would use. Hope this helps.
Question:	Will the motion sensor be set off by a small (toy size - 10 lbs) dog
Answer:	I have mine installed in a small walk-in (6 ft x 5 ft) closet and my 10 lb cat triggers it all the time, kind of annoying when it happens at 1 am. I just close the door to preven this from happening.
Question:	Will this work as... Enter room and I manually turn on the light and then the unit automatically turns off the light after a set time of inactivity? I only want it to turn off the light
Answer:	Follow up question on the previous answer....So if the unit turns off the light, is the actual switch toggled back to the "off" position? So that the next time someone walks in the door, they have to again toggle the switch back to the "on" position?
Question:	I don't get the,"No neutral required." A neutral is always required. What am I missing here
Answer:	I was an electrical engineer for Lutron back in the 1980's. Many dimmers and electronic switches like this one do not require a neutral wire to work. This is not a mechanical switch but an electronic one. It uses a silicon switching device called a triac which turns the light on and off 120 times per second, just like every dimmer ever made. During the brief period 120 times/second when the triac is off, the device draws a small amount of power through the light bulbs it controls, and uses this small amount of power to charge a capacitor, which you can think of as a rechargeable battery. Thus there are many wallbox products, such as most dimmers, that do not require a neutral wire to operate. Nor does it put any power intentionally to ground, which would be against the electrical code and thus could not be sold. The reason other companies require a neutral wire is because they were not designed by companies that also make dimmers as their engineers probably do not realize the device can be designed to draw sufficient power using a triac instead they use a relay, which would produce an audible click when switched on, where as a triac device would make no sounds when turning on and off. Hope this helps.
Question:	Does this come as pictured with the mounting stub or is it just the sensor? Thanks
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Can I use two of these in paralled to work one light? I want to mount them on the corners of a garage and turn on one central light
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	Can you disable the dusk to dawn setting
Answer:	yes
Question:	does it come on during the day when detecting motion or just after dark
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

Heath Zenith 180 Degree Motion Sensor Replacement, Bronze

The 180° Universal Replacement Sensor has a bronze weather resistant housing. It has an adjustable range up to 70 ft. with a 180° range of motion detection. It has a selectable light timer that can be set for 1, 5 or 10-minutes. Has a daytime shut off, sensitivity adjustment and automatic power outage reset.

Lutron Motion Sensor Switch

Maestro occupancy/vacancy sensors automatically turn lights on when you enter a space and off when you leave, making them a convenient way to save energy and add simple automation to your home.

Garage

Lutron sensors are great when your hands are full and you can't easily reach the light switch.

Laundry Room

It's laundry day and clothes are piled high. Sensors installed in the laundry room gives you one less thing to worry about.

Kids Bedroom

Do you have forgetful children? Install a motion sensor and never worry about your kids leaving the lights on again.

Product description

EB NON-REV MTR STRT 3PO3PH 30A600V

From the Manufacturer

Leviton's Industrial Grade AC Manual Motor Starter Switches provide safe, reliable control of a variety of motor loads. Typical applications include manual ON/OFF switching control of bottling lines, pumping machines, air compressors and other heavy manufacturing equipment. These motor controllers are available for both single-phase and three-phase applications. Leviton uses the finest materials available and the highest production standards to produce industrial switches of unmatched versatility and reliability. 30 Amp 600 Volt, Three-Pole, Three Phase AC Motor Starter, Suitable as Motor Disconnect, Toggle, Industrial Grade, Non-Grounding, Black.

• Fits in standard wall box
• Accepts back or side wiring, terminal clamps or ring terminals
• Oversized toggle provides clear actuation feedback and long-lasting durability
• Nickel-plated #10 triple-combination terminal screws for corrosion resistance
• Limited 10-year warranty

User questions & answers

Question:	What kind of breaker do you use with it
Answer:	Universal product #UNV-84680 (4⅜" x 6½") is 5 mil thick
Question:	Is this 30 amp per pole or 30 amp total? Using it in a 3 phase circuit
Answer:	I don't know as I never saw them, ordered from USA for my son who lives there. I live in Spain. Most glasses are degradable.
Question:	Can this be used to switch between two nema 14-30 outlets (indoor dryer and outdoor RV hookup
Answer:	It has not turned my finger green and the only reason the stones get cloudy is because I am messy. It cleans up sparkly and beautiful. My brother and wife were recently visiting and it wasn't until later that I realized she was dying to know where that expensive diamond ring came from! It really is pretty. I've had it for several months and have not had any problems with it.
Question:	Does it come in white or ivory
Answer:	The 2 carat was big enough. I think if I had the 3 carat it would have looked very fake & cheap.

Product features

Powerswitch Manual Motor Controllers

Heavy-duty horsepower rated switches capable of providing manual ON/OFF control to higher motor loads than standard toggle switches. Built to last.

Product description

24-LEDs Closet Light, Make Your Life Brightness, Convenient & Easy

Ideal for the bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room etc.

How To Use It

① Night Mode: Long press the switch for 3-5s till the BLUE indicator lights up. In this mode, the light will turn on when detecting movement in DARK enough condition. (Please note: it will not turn on if it is not dark enough or in daytime)

② Day Mode: Single press the switch till the RED indicator lights up. In this mode, the light will turn on as long as it detects human’s movement,not only in dark condition, but also in daytime.

③ Always-on Mode: Single press the switch till RED/BLUE Indicator lights flicker at the same time. In this mode, the light will always on.

ON/OFF: Long press the switch for 3 seconds, the light will enter Night Mode; Long press the switch for 3 seconds again to turn off the light. (LED Indicator will flash 5 times)

Specification:

- Material: Aluminum+ABS

- LED QTY: 24LEDs

- Sensing Range: 120°, 3m/10ft

- Power: 4W

- Battery: 800mAh

- Operating current: 400-800 mAh

- Lumens: 150LM

- Operating temperature: 0-80°C

- LED Life Time: 50,000 hours

Charging Description

• Charging: RED light
• Charged: BLUE light
• Charging Time: about 2-3 hrs

Package Included:

• 3 x 24-LEDs motion sensor light
• 3 x Adhesive strip with magnetic
• 1 x USB cable
• 1 x Manual

Caution:

Please do not put two light too close,they will interact with each other in "AUTO" mode.

Lifetime Warranty after confirmed. Please feel free to contact us for any issues, we'll give you a satisfied reply within 24hrs.

• 【 SUPER BRIGHT 】-- 3 Packs of 24 pure white ( 150LM ) & energy saving LEDs, brightness and comfortable to illuminate dark spaces.
• 【 EASY TO INSTALL 】-- Built in strong magnetic, this light can be adsorbed directly on any iron product, OR installed by magnetic strip ( included ), no hard wiring. It’s very easy to install and remove.
• 【 4 CYCLE MODES 】-- MODE 1: Night Mode ( Blue indicator light flash 1s), MODE 2: Day Mode ( RED indicator light flash 1s), MODE 3: Always On Mode ( Red & Blue indicator light will flash 1s ), MODE 4: OFF;
• 【 MOTION & NIGHT SENSOR 】-- With 2 Sensor Modes, it can detect the motion of human in the dark or daytime. Auto-on within 10ft (3m), auto-off after about 20 seconds of no motion detected. Super saving energy!
• 【 APPLICATION & LIFETIME WARRANTY 】-- Ideal for the bedroom, closet, cabinet, workshop, garage, stairwell, hallway, storage room etc. We provide you Lifetime Warranty for FREE. Please feel free to contact us for any product quality issue via email, we will offer you a free replacement after confirmed. Because we have high confidence in our products. Better Light, Better Life!

Product description

Experience the ultimate convenience with the Lutron Caseta wireless dimmer and Pico remote control. The wireless dimmer gives you the ability to set the right light for any activity whether it's reading, watching TV, entertaining, or having a casual dinner. Control your lights in a 3-way application by mounting the Pico remote to the wall with the included Pico wall box bracket, for multi-location dimming. No cutting holes or wiring required! The remote lets you turn lights on/off as well as brighten or dim them. With the Lutron smart bridge and app (sold separately), you can control your caseta wireless dimmers with your smartphone from anywhere. The dimmer works up to 600-watt of incandescent or halogen and 150-watt of dimmable LED or dimmable CFL. Pico takes CR2032 battery, included in remote.

• Works with Alexa to support dimming through voice control (Smart Bridge required, Alexa device and Smart Bridge sold separately)
• Replaces an existing switch and installs in 3 steps in as little as 15 minutes; Ideal dimmer for all homes, as it does not require a neutral wire
• Can control up to 17 bulbsper circuit (based on 8.5 W LED bulbs, 60W incandescent equivalent)
• Tested and recommended for use with over 1, 000 bulbs(for recommended LEDs, please see "Technical Specification")
• Works with up to 150W dimmable LED/CFL or 600W incandescent/halogen bulbs; Not rated for low voltage applications (i.e. track or landscape lighting)
• Use included Pico remote to run lights on/off or raise/lower to adjust brightness from anywhere around your home
• For use in multi-location applications, replace existing switch with included Pico remote and wall plate brack (PICO-WBX-ADAPT, sold separately)
• Works with your voice assistant or smart phone via the free Lutron app for iOS and Android (Smart Bridge required)

User questions & answers

Question:	I live in an old house, My switches only have 1wire, the hot. No ground and no neutral in my wall switch boxes. Will this work for me
Answer:	You could use this in conjunction with the Insteon 2475F FanLinc Insteon Dual-Band Ceiling Fan and Light Controller, to controll the light functions. Use your remote to control the fan functions. The switch is of course unnecessary however.
Question:	Can you program 2 remotes to work with one switch? I want one wall mounted and one hand held
Answer:	This item needs to work with an Insteon hub, there is a hub that works with HomeKit. But this is a combination I have not tried.
Question:	Does anyone know if this dimmer works on a three way switch
Answer:	The Smarthome page for the 2466DW says nothing about dual-band. Neither the quickstart guide nor the owners manual say anything about dual-band. The owners manual states, in more than one place, that you need to "make sure you have installed at least two Access Points (#2443) or other dual-band INSTEON products". I think it's pretty certain that this product is NOT dual-band.
Question:	I purchased the Lutron P-PKG1W-WH and my new LED bulbs are flickering when being dimmed. They are dimmable bulbs and I have tried 2 different brands
Answer:	Yes. I have the 2466DW installed in my kitchen in a 3-gang switch box in the center between two other standard Lutron toggle switches. I needed the Insteon as it was the only toggle style dimmer switch compatible with controlling the low-voltage(twicebright CL1220TL) mini-recessed lights that use dimmable LED bulbs above my sink. The switch is high quality and easy to program for the desired on level.

Product description

ITW BRANDS 40088 .22 Caliber Fastener Tool

• N/A
• Imported
• Powerful, low velocity, single shot actuated tool for fastening to concrete, masonry, or steel
• Silencing handle eliminates unnecessary job-site noise
• Innovative and ergonomic ejection slide

User questions & answers

Question:	Can I use dewalt brand nails and .22 loads
Answer:	You don't specify the size of the nail that you plan to use. But I wouldn't recommend it for cinder block. On cement block, it will work if you are able to avoid the hollow portion of the block. Otherwise, it could blow out the back portion of the block. Remember to follow the ratings on the charge.
Question:	Whats the weight capacity for hanging something
Answer:	Hello, the pistol only uses one shot at a time, you need to recharge every time you shoot (nail)
Question:	Will this tool work with concrete/cinder block? Some say no. If not, what alternative works with similar ease/mechanism of use
Answer:	Probably not a good idea. I know ammo is very hard to get but these are not the answer.
Question:	Can you hand 1 hole straps with this and/or drive rings
Answer:	I don’t think so.

Product description

ITW Brands 40066 . 22 Caliber Trigger Shot Tool

• Use for fastening to concrete
• Use for fastening to masonry
• Use for fastening to steel

User questions & answers

Question:	Can this be used to install handrails on outdoor concrete stairs
Answer:	Brown is #2 (Mortar Joint), Green is #3 (Concrete Block) and Yellow is #4 (Solid Concrete).
Question:	Can you install washered pins with this tool
Answer:	It should work in brick but may crack it.
Question:	Is there a chart to tell the difference between color shots
Answer:	I don't see why not, I bought the ones bundled with the gun, but I think the Dewalt brand nail & loads should also work
Question:	will this work on a brick
Answer:	I did side wall panels against the wall and it did my job excellent

Product description

Retaining the proven reliability of our Etoolcity technology, the automatic dust controller switch is the latest Version of the Etoolcity Vacuum Autoswitch-an essential device in workshops and on job sites for more than a decade.



THE NEW ETOOLCITY AUTOSWITCH FEATURES

★New Current Sensing Technology and Actuation Threshold

★Supports a Wide Range of Cutting Tools from Rotary Handheld Devices to Large Shop Saws

★Prevents Circuit Overload with an Auto Turn-On Vacuum Delay

★Runs the Vacuum Only While You’re Using Your Tool So You Save Time and Electricity

★Automatically Delays Vacuum Turn-Off by 7 Seconds to Continue to Clear the Air While the Motor Spins Down

★Helps to Comply with OSHA Requirements for Dust Control



Highlights of the Etoolcity Autoswitch:

▲STARTUP DELAY.Controls in-rush current to help avoid circuit overload

▲AUTO MODE.Turns the vacuum on automatically with the power tool

▲SHUTOFF DELAY.Allows time for the vacuum to clear the hose of debris



Focus On Your Work:

★Save time

★Minimize airborne dust Reduce

★Cleanup



Product guarantee: Full money back guarantee without reason, 2-year warranty and 24-hour support for customer service.



3 easy steps to install:

1: Plug the switch into wall

2: Plug vacuum into 'B' port outlet and switch on the vacuum

3: Plug tool into 'A' port outlet and use your tool as normal



ELECTRICAL SPECIFICATIONS Outlet Required:

1.Standard 120V/15A or 220V/10A,50/60Hz Outlet

2.Input Connection: 3prong(grounded)male

3.'A' Port Power Rating: 120V/15A or 220V/10A,50/60Hz

4.'B' Port Power Rating: 120V/15A or 220V/10A,50/60Hz

5.Actuation Threshold: ~0.25 Amps(about 30W at 120V)



Package Included:

●1x Automatic vacuum switch with 15'' power cord

●2x Mounting screws

●1x Installation instruction

●1x Strong nano-markless hook sticker

• Unique Current Sensing Technology. If the tool motor connected to the 'A' port exceeds 30W, the vacuum connected to the 'B' port will automatically delay 1s to turn on, which helps prevent circuit overloaded by large current if tool and vacuum power-on at the same time
• Make the Work More Effective. Automatic delays 1s to turn on the vacuum when you start your tool, and delays 7s to turn off the vacuum to clean the inlet tube when you complete your work. Saving time and electricity, reducing airborne toxin and work area noise that can lead many health problems
• Suitable for Most Medium Duty Workloads. Etoolcity automatic vacuum switch has a starting threshold of approximately 0.25 amps(30watts at 120V and 60watts at 220V), perfectly suited for medium-sized work loads such as most Miter Saws, Table Saws, Power Sanders and Routers, and extend the life of your vacuum
• More Safety. Adopting high-cost, UL-certified American Standard 14AWG power cord which allowable passage with a large current that more than 30A, the Etoolcity Automatic Vacuum Switch can work stably within 3600W. The switch's shell has PC+ABS V0 grade flame retardant material, it is more reliable and safe to protect work
• Two Installation Methods. You can use screws to fix the power module part, or use strong nano-markless hook sticker to attach directly to the wall. Both ways are very strong

User questions & answers

Question:	What is the Warranty period
Answer:	2 Years!
Question:	What do you do when you want to use thr vacumn stanalone to vac the floor
Answer:	You unplug the vacuum and plug it in to a regular outlet. If you want to do this frequently, you might consider one that has a switch, such as https://www.amazon.com/Automated-Vacuum-Switch/dp/B0035YGLZG/ref=cm_wl_huc_item
Question:	Will a palm sander kick the shop vac on? I am using a bosch 5" sander
Answer:	it should be no problem, it works with my 5" sander
Question:	can you plug it into multi outlet and then use for more than tool
Answer:	Hi, dear! You can plug a multi outlet into our vacuum switch 'A' outle, and then use for more than tool! But please note that the total power of our 'A' outlet cannot exceed 1800W.

Product description

TOPGREENER TDOS5 Motion Sensor Switch automatically turns lights and motors on and off according to the motion (occupancy/vacancy) detected in the room. There are two modes: Occupancy (OCC) and Vacancy (VAC) modes. In occupancy mode lights are automatically turned on when you enter a room and automatically turned off after the room is vacant. This is especially convenient when entering a room with your hands full, such as an entryway, laundry room, garage, etc. Avoid fumbling in the dark for the light switch or tripping when entering a dark room. Having the lights automatically turn on will deter thieves and allow a surveillance camera to capture clear footage. Use OCC mode for the kitchen, laundry room, garage, restroom, office, closet, etc. Vacancy mode is another option to choose from, which requires manually turning the light on and automatically turns the light off when the room is vacant. VAC mode is used in rooms that do not need the lights to automatically turn on, such as bedrooms and media rooms. This ensures the most energy savings because the user decides when to turn the lights on. The TDOS5 sensor switch provides reliable performance. When no motion is detected within the set time delay the load will turn off automatically. The PIR sensor switch's visually aesthetic design and broad compatibility make it a good choice for you to upgrade your home. Variable time delay from 15 seconds to 30 minutes allows users to choose their preferred option. This occupancy sensor switch is only for single pole use. A neutral wire is required for installation.

• 2-pack motion sensor switch detects motion to automatically turn lights on and off based on the occupancy and vacancy in a room
• Sensor switch uses a passive infrared (PIR) sensor to reduce false triggers from unwanted movements
• Occupancy switch mode (Auto ON, Auto OFF) and vacancy switch mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs
• Light switch sensor features adjustable settings; variable time delay from 15 sec (Test) to 30 min; adjustable range
• NEUTRAL WIRE REQUIRED, 314 square feet coverage, 180-degree field of view; 120VAC, 500W incandescent/halogen, 250W CFL/LED, 1/8HP motor; single pole only; 2x wall plates included; CA Title 20 & 24 compliant; UL listed; 1-year

User questions & answers

Question:	Are they only available in white
Answer:	I have only seen them in white so far.
Question:	does it work with two-way switch
Answer:	I don't know. We have it on a single switch and it works great
Question:	My wire includes a black, a white and a copper. How do I connect them to the switch which has 4 wires
Answer:	It seems that your neutral wire is missing. Please check the back of your box to see if there is a bundle of wires, which should be your neutral. Otherwise, you will need the TDOS5-J model, which does not require neutral but requires a ground: https://www.amazon.com/dp/B01IO1M5WW?ref=myi_title_dp
Question:	What is the "Light" adjustment dial for? Is this a dimmer adjustment for the connected fixture
Answer:	The light setting can be used to keep the switch from turning on if the ambient light is above the set level. For example if you use this switch on a patio or lanai and only want the motion to turn on a light if it's dark outside; you would turn this dial all the way and then slowly back it down until the light comes on at the ambient light level you desire.

Product features

TOPGREENER TDOS5 PIR Motion Sensor Switch, 2-PACK, White

The TOPGREENER TDOS5-W combines occupancy and vacancy sensors into one motion sensor switch for energy efficiency, security, and convenience. The 2-in-1 motion sensor detects occupancy and vacancy in a room to automatically turn lights or fans on and off. Enjoy hands-free convenience by never having to fumble in the dark looking for the switch. Give yourself one less thing to worry about by having the peace of mind that your lights will always automatically shut off.

A neutral wire is required for this switch to operate correctly.

Energy Savings

Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights accidentally left on all day.

Security & Safety

The TDOS5 is the ideal choice for seniors, children, and employees when it comes to safety. Making sure lights automatically turn on allows occupants to see where they are going, improves visibility in an otherwise dark room, and prevents accidents. PIR motion sensors turn lights on, allowing security cameras to capture clearer footage of your home or office.

Convenience

Keep it hands-free as you walk into your home with groceries or into the laundry room or closet with a handful of laundry without having to manually turn your lights on or off.

Custom Settings

With advanced technology packed into intuitive and easy-to-use settings, you can easily adjust the length of time lights will stay on or how sensitive the sensor is to motion. Make your home smarter in one switch!

Occupancy (OCC) Mode: Detects occupancy and vacancy in a room for full automation of lights, fans, or other loads. The sensor will automatically turn On/Off when triggered by motion. When no motion is detected within the delay time, the lights will turn off automatically.

Vacancy (VAC) Mode: Detects vacancy in a room to automatically turn lights off. Lights are manually turned on when entering the room. When no motion is detected within the delay time, the lights will turn off automatically.

Product description

A Versatile Motion Sensitive Light Switch That Can Save You Energy

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off from 5 minutes to 30 minutes of inactivity. Most importantly, you also have the choice of “Manual On” or “Automatic On”. Manual On is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Automatic On is ideal for bathrooms, closets and other rarely used rooms.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It also prevents teenagers from forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’s dozens of uses, all over the home.

100% Money Back Guarantee

If you aren’t completely satisfied, for any reason at all, simply send it back to us within 30 days and we’ll give you a full refund – no questions asked.

Start Saving Energy and Make Life Easier – Pick Up This Motion Sensitive Light Switch Today

• NEUTRAL WIRE REQUIRED: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility.
• SAVE ON ELECTRICITY BILLS: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.
• ADJUSTABLE SENSITIVITY WITH WIDE FIELD OF VIEW: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.
• 100% MONEY BACK GUARANTEE: We stand behind the quality and utility of this light switch. If you aren’t completely satisfied with it, for any reason at all, simply send it back to us for a full refund – no hassles, no delays and no questions asked.
• FULLY CERTIFIED AND COMPLIANT: UL Certified, FCC Listed and California Title 24 Compliant.

User questions & answers

Question:	Hello, does this work with LED lights
Answer:	It comes with the mounting stub as pictured. The mounting stub is the standard size for attaching to an electrical box (there are any number of options as to what size and style). I purchased this unit about a year ago and it has functioned flawlessly.
Question:	Will this work with fluorescent light fixtures
Answer:	My guess is you will burn them out. i tried this once with a water circulation pump (no light in the circuit) connected to a relay. A friend of mine had 3 of these in 3 different bathrooms in his house. the thought was as soon as someone walked into a bathroom, this device would activate a pump which would circulate hot water from the water tank to the fixtures (and hence the cold water in the line back to the tank for heating). We took precautions. first we made sure the power going to the 'hot' and neutral side of the sensors were from the same breaker (otherwise you could accidentally send 240 volts to the load if the sensors were on different sides of the line coming into your breaker panel). Second, we used a relay (mentioned earlier) as 'the load' because the draw (in amps) of the circulation pump was more than the sensor would allow as a pass though (you have to pay attention to the current these things will allow... watts, amps, miliamps - all need to know stuff! - we could have hooked it up directly, but it would have burned them out in short order, not to mention create a fire hazard). Finally, we ran all three of the load wires back to one junction box, tied them together with a wire nut (to complete the parallel connection you are talking about), and connected the load to the trigger side of the relay. we walked in each room and sure enough, the motion sensor engaged the relay, and the motor kicked on and the water circulated as designed. we thought we were home free. after about 2 months, we noticed one of the sensors was no longer activating the relay (and the pump did not run). we could eliminate the motor as it was completely separated from the electrical path. we discovered one of the motion sensors had burned out. replaced it, and all was well, and then a month later, a motion sensor from ANOTHER bathroom burned out. the relay hardly drew any power, so it couldn't be that. then we separated all of them and had three separate relays to engage the pump - never had another issue with burn-out. so what happened? we think if a person 'tripped' the motion sensor, it sent 110 volts to the load side of the other sensors (which were not activated by motion), and that 'back flow' of power messed up the electronics inside the sensors not in use. only explanation that made sense. so long story short, you could connect them in parallel, but i think they would burn out because of a 'back flow' between the devices. when we separated them with individual relays - no problems. e-circulation pump would have drawn more amps than the sensor allows to pass through we ranf the 'load' side of
Question:	anyone know how many amps this can handle
Answer:	yes
Question:	I want to install this in my foyer. Will this sense movement from second floor when coming the downstairs
Answer:	If your application requires it to work during the day just put electrical tape over the photo sensor and it works 24/7. I used sensor to activate a fountain pump 24/7

Product features

C1 Motion Sensor Light Switch (Single Pole)

Are you tired of people leaving the lights on when they leave the room, costing you money and burning out your light bulbs? Or are you looking for the comfort, safety and convenience of walking into a dark room and having the light switch on automatically? This motion sensitive light switch is perfect for your needs. It has an incredibly wide 180° field of view, so it can pick up motion as soon as you walk in the room – with no need to wave your hands around. Once you leave, it will automatically turn the light off after a pre-set amount of time.

Perfect For Any Room In Your Home

This switch is ideal for situations where your hands are full and you can’t turn on the light, like laundry rooms. It assists you when forgetting to turn off the bathroom or basement light. It can even make stairways safer, by making sure that you never have to walk down in the dark. There’re dozens of uses, all over the home or office.

Fully Adjustable With A Range Of Different Modes

This switch is incredibly versatile. You can adjust the sensitivity and level of natural light, so that the light will always stay on when the room is in use. You can also adjust the time delay to turn the light off at preset intervals of 15 seconds (Test), 1 minutes, 5 minutes, 15 minutes, 30 minutes of inactivity. Most importantly, you also have the choice of Vacancy Mode (Manually turn on the light) or Occupancy Mode (Automatic turn on the light at detection of motion). Vacancy Mode (Manual) is perfect for children’s bedrooms. The light will switch off automatically, but you turn it on with the switch. Occupancy Mode (Automatic) is ideal for bathrooms, closets and other rarely used rooms.