14 best leviton motion sensors

Product description

Decora Vacancy Sensor. 180 Degree PIR manual-on wall box sensor, single pole or 3-way when used with the IPV0R companion sensor remote, 600W LED/CFL, 1800W incandescent/halogen, 1800VA fluorescent ballast, 1/2 HP motor, wallplate sold separately. Can be used to comply with 2019 California Title 24, Part 6 Vacancy Control Device Requirements – White, Ivory & Light Almond.

• ENERGY SAVING – Manual ON/Automatic OFF
• AMPLE COVERAGE - Provides 180-Degree field of view, 900 square feet of coverage
• FLEXIBLE – Single Pole or 3-way installation when used with the IPV0R companion sensor remote
• PRACTICAL – Ideal for high traffic areas like bathrooms, hallways and kids’ bedrooms
• ADAPTABLE – For higher voltage applications, multiple lighting as well as motor loads

User questions & answers

Question:	Will this work for 16 3 ft. standard fluorescent lamps
Answer:	I do not know, we are using it for bathroom 3 light fixture only
Question:	Can I buy it here
Answer:	Yes sure
Question:	Will this work with a bathroom fan with heating function? The heating module uses up to 1300W
Answer:	If the total power consumption of your bathroom fan, light and heating module is under 1,800 W, it should work. However, I don't know if this switch is rated for a wet location like a bathroom where it can be subjected to moisture and water condensation. You might want to contact the manufacturer about this.
Question:	Why does this switch need a neutral wire given that it doesn't need power when the lights are off
Answer:	The motion sensor, it needs a neutral and a hot wire in order to power the circuit

Product description

Leviton IPS02-1LW 300-Watt Incandescent, 150-Watt LED/CFL Occupancy Sensor (Auto ON/Auto OFF), Single Pole, White. Compatible with Decora screwless snap-on wallplates (sold separately).

• Automatic ON/Automatic OFF provides 180 Degree field of view and 900 square feet of coverage
• 300W Incandescent / Halogen, 150W LED / CFL, 200VA Fluorescent, 1/6HP Motor loads
• Fits in standard wallbox and replaces single pole wall switch, no Neutral wire required for installation but ground wire is required
• Five year limited warranty

User questions & answers

Question:	Can anyone suggest a wall mount single pole p.i.r. switch with no manual "off" override? I have seen these in hospital restrooms with no visibl brand
Answer:	LEVITON MAKES 1
Question:	Anyone else finding the light ON without any motion? I open the garage door and see the light on at random times day/night. Garage is empty
Answer:	Mine also comes on when the HVAC starts or stops. I've also noticed that it comes on at night when I open my bedroom door. The door is completely out of sight from the switch. I can only imagine that the switch has an extremely sensitive pressure sensor in it also. I think I'll be replacing it since I think it comes on / off several times a day when we're not at home and the whole point was to try to save energy!
Question:	Will this completely turn off LED lights or is the light still slightly on even if the switch it off
Answer:	You must have ground connected or the LED light will stay slightly on. If you don't have a ground, it won't work correctly with LED bulb.
Question:	I don't want anyone to be able to turn off the light manually, is that possible
Answer:	It is not designed to do that but you can easily work around it. Remove the front face and on the bottom of the removed face are 4 black protrusions. Three are necessary clips but in the middle is a shorter rounded protrusion that does the pushing of the switch. With a nail cutter, or small wire cutter, flush cutter or the side of a small file hack off about 1 millimeter of that nub. Make sure the light in on (push the round black pad in the switch) on put this modified switch conve back on and test it to see if you removed enouch of the "pusher" that it will not activate when you push the button.

Product description

The Leviton ODC0S-I1W Ceiling-Mount Self-Contained Occupancy Sensor is the cost-effective choice for commercial and institutional spaces where traditional ceiling-fixture installation is difficult, inconvenient, or costly. Ideal for storage areas, small bathrooms, copy rooms, mop/sink closets, or small spaces without wall switches, this self-contained sensor will help reduce energy costs and it does not require an external power pack and will help reduce energy costs.

Automatic Lighting Control for Energy Savings

It's well-known that turning off the lights when leaving a room is one of the simplest ways to cut down on energy usage. Yet it's not always convenient or easy to remember, especially in rarely used storage spaces or rooms in which a variety of people are coming and going throughout the day.

The Leviton ODC0S-I1W Ceiling-Mount Self-Contained Occupancy Sensor helps eliminate this problem by providing automatic motion detection for lighting control. It has an adjustable 360-degree field of view and offers approximately 530 square feet of coverage when mounted at eight feet, reducing the number of sensors required in many spaces. It also offers an adjustable, delayed OFF time setting between 20 seconds and 15 minutes for maximum savings.

About PIR Technology

The ODC0S-I1W uses Passive Infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied for the preset time you've entered, the unit will switch the lights OFF.

Manual Override and LED Indicator for Easy Operation

For added convenience, the ODC0S-I1W offers an ambient-light override option that can be set between 0.5 and 500+ foot-candles at full brightness to prevent the sensor from switching lights ON when there's sufficient sunlight, regardless of occupancy. A standard A/C toggle may also be used to switch lights OFF during presentations. And to ensure continual operation, an LED indicator flashes when the sensor detects motion to verify power placement and proper functioning of the unit.

Compliancy and Warranty Information

UL Listed and CSA certified, the ODC0S-I1W complies with the California Title 24 Energy Code and FCC regulations. It is backed by a five-year limited warranty.

What's in the Box

Leviton ODC0S-I1W Ceiling-Mount Self-Contained Occupancy Sensor and manual.

From the Manufacturer

Leviton's self-contained passive infrared ceiling occupancy sensor is the cost-effective choice for commercial and institutional installations, where installation of the recessed ceiling unit is difficult, inconvenient or costly. Available in 120V, 220V and 277V versions, the ODC0S-I is ideal for storage areas, small bathrooms, copy rooms, mop/sink closets or small spaces without wall switches. The self-contained ceiling sensor does not require an external control unit for power or switching the load on and off. 1000W INC 1000VA FL, 120VAC 60Hz, PIR, 360-degree, 530 sq. ft. coverage, ceiling mount self-contained occupancy sensor, commercial grade - white.

• 360 degrees field of view with approximately 530 sq. ft. of coverage when mounted at 8 ft. Iindoor use only
• Adjustable Delayed OFF time setting between 20 seconds and 15 minutes allows custom adjustment for maximum savings.
• LED indicator light flashes when sensor detects motion, to verify power placement and function of sensor at installation.
• Segmented Fresnel lens contains 79 segments for optimum sensitivity and detection performance. Operating temperature 32-122 Degrees F.
• Leviton offers a wide selection of motion sensors that use passive infrared, ultrasonic or a combined multi-sensing technology.

User questions & answers

Question:	Can I cut the power to this every night without losing the settings? I have a master switch that I use to cut the power to multiple rooms
Answer:	I expect so since the settings are made by mechanical adjustment...that is, you turn/slide real switches.
Question:	Can we put 2 of these in a large room on the same light circut
Answer:	No, it is a single pole switch
Question:	what is the range they can see
Answer:	Based on the information listed, mounted at 8', it has a circular detection range of 23'.
Question:	Is this a light or just the switch? How many lumens? I want the area well lit, not just a night light
Answer:	This is just the switch that turns the.power on or off for some other light fixture (not supplied )

Product features

Our History of Ingenuity

After immigrating from Russia to the United States, Isidor Leviton opened a small tin-smiting business in 1906, where he produced mantle tips used for gas lighting. With the invention of Edison’s light bulb, Leviton shifted to manufacture a single electrical product: the pull-chain lamp holder. During our earliest years in business, the population of New York City began to increase dramatically. Leviton supplied the switches, outlets, light sockets and other electrical parts for them. During the 1940s, Leviton also helped manufacture parts for machinery. Our Journey from electrical to lighting to networking, Leviton is engineering thoughtful solutions that help make life easier, efficient and productive.

Product description

Leviton RS110-10W 110D OUTDR SNSR WHT

From the Manufacturer

Leviton offers many products that will help lower electrical costs and add convenience to everyday living. Passive Infrared (PIR) outdoor motion sensors provide outstanding value in security lighting, convenience, safety and energy savings for a wide range of commercial and residential applications. Easy to install and adjust, they automatically turn on lights in response to the slightest motion. Leviton 500W, 120 Volt AC 60Hz, PIR, 110 Degree, 2500 Square Feet Coverage, Outdoor Occupancy Sensor, Residential Grade, White.

• Ideal for a wide range of residential settings including backyards, garages, entranceways, porches, swimming pool areas, doorways and private docks
• Sensor neck adjustment allows accurate area monitoring: 110 degrees vertical, 180 degrees horizontal, 110 degrees rotational
• Adjustable delayed OFF time settings from 20 seconds (for test mode) to 15 minutes
• Adjustable sensitivity reduces false triggers
• Provides Automatic, Test and Continuous Modes: Test Mode simulates automatic operation with short delayed OFF time for ease of making adjustments. Continuous Mode enables manual override for constant lights ON operation

User questions & answers

Question:	any way to disable the light sensor so that it always activates lights by motion
Answer:	Although there is an adjustment to light level needed to activate the light, you can't completely override the need for some darkness for activation. The light sensor on this model is inside the sensor head and can't be physically blocked, so the answer is no.
Question:	Can you connect to multiple lights at once
Answer:	Yes but you have to know how to do wiring. The device will not handle more then 500 watts. So it will also depend on the lights you use. My advice is to go with a LED light source and I did so you never have to worry about the wattage. Once again how you do your wiring between devices is where you control how many devices you add on not the Leviton unit.
Question:	Does it have a light sensor so that it will not turn on during daylight hours? Seems like it should
Answer:	Yes. No light in daylight
Question:	How would I mount the motion sensor by itself, rather that to a light fixture? Is there a piece of hardware that goes with it
Answer:	As an electrician, you would use either a round or rectangular weatherproof box with a weatherproof cover. The box or cover needs to have a 1/2 inch hole so you can screw the sensor into. Also, if the sensor has a locknut with it, screw the locknut onto the sensor, then srcew the sensor into the box or cover a turn or two, using the locknut to put tension on the box or cover so the sensor can be positioned the way it needs to be without being loose. I hope you can make sense out of what I am saying.

Product description

From the Manufacturer

The most advanced sensor available. Combines multi-technology with all-digital architecture. Eliminates false triggering. The result is a trouble-free, "install and forget" solution for lighting control. Leviton Multi-Technology, 360 Degree, 1000 Sq. Ft. Coverage, Self-Adjusting, Ceiling Mount Occupancy Sensor, Commercial Grade - White no.OSC10-M0W.

• Small Size: Installed sensor appears almost invisible
• Learned and adjusted settings saved in protected memory
• Select the approximate area needed. Units from 500 to 2000 sq. ft. available
• Accurate, consistent switching: occupant complaints are eliminated; lights are on when room is occupied, off when empty. Annoying false-offs are minimized and lights on at night is eliminated.
• Ambient light recognition: the photocell prevents lights from turning on when room is adequately lit by natural light.
• Fast simple installation: easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment
• Maximum reliability, low cost: all digital circuitry uses a minimum of components.

User questions & answers

Question:	Can this sensor be set to allow only manual switch on of lights & only conduct auto switch off once it senses people are no longer present
Answer:	no it can only be one or the other not both.
Question:	What is the maximum, load that one sensor can handle
Answer:	This is a low voltage unit 24 volts a power pack installed near the unit and light is what you will need
Question:	Hi, if someone leaves the room for the day but leaves the radio or Tv on, will the ultrasonic part of the sensor pick up the noises & keep lights on
Answer:	This is a dual technology sensor that uses both ultra-sonic and infra-red technologies to minimize false triggers. So, no it should not do this.
Question:	Can the Leviton OSC10-M0W along with Leviton OSP20-D0 Power Pack be used with LED lights
Answer:	Hi, R. Singer I am using the OSC10-MOW ceiling mount together with the OPB15-DAW for the two led lights in my carport. The OPB15-DAW is build into the ceiling and the OSC10-MOW attaches to it, a perfect fit. It looks neat and works fine.

Product description

Save energy consumption by installing Leviton OSC15I0W ceiling mount occupancy sensor in offwhite. The model is designed to eliminate false triggering. Its sensor features an ambient light recognition capacity. In other words, in the presence of natural light, the model will prevent light from turning on. You can adjust the sensitivity of sensor from 0 to 100. The Leviton OSC15I0W is a perfect choice for computer rooms, conference rooms, cafeteria, and many more. Reduce the energy consumption with Leviton ceiling mount occupancy sensor.

• Easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment
• An internal microprocessor continually analyzes, evaluates and adjusts settings
• All digital circuitry uses a minimum of components
• A photocell prevents lights from turning on when the room is adequately lit by natural light
• Leviton offers a wide selection of motion sensors that use passive infrared, ultrasonic or a combined multi-sensing technology

User questions & answers

Question:	is this sensor works with this camera Dlink 5222 ? It will trigger this camera when detect motion ? It has a digital output
Answer:	No...
Question:	How do you get the main unit to stick onto the base plate? I keep trying to push it on and rotating it but it doesn't catch
Answer:	Align the arrows on the base plate and the sensor and hold the sensor on the plate. Rotate the sensor slightly in either direction and you're done. It does not fit tightly or click in place, but it does not come off.
Question:	does this require occupancy sensors switches to operate ? and if so what model works with the product
Answer:	THis is a low voltage product that needs (Leviton OSP20-D0 Power Pack for Occupancy Sensor, 20 Amp FL/INC, 120-277VAC 60Hz, 1HP at 120VAC, 2HP at 240VAC, Black) To control the lighting.
Question:	which type of Occupancy sensor can be interconnected
Answer:	no clue but it installed easily and the sensor isn't overly sensitive. It does a great job providing light to a previously dark closet.

Product description

Infrared sensor; incandescent/fluorescent/motor load; 800 W at 120 V (incandescent), 1200/2700 VA at 120/277 V (fluorescent), 1/4 hp at 120 V (motor) load; 180 deg field of view; 30 sec to 30 min time delay; white; wall mounting

• Leviton 1-Pole Commercial Grade Occupancy Sensor Wall Switch, Passive Infrared, 120 / 277 Volts
• Convenient push-button provides manual on/off light switching at any time
• 180-degree field of view provides approximately 2,100 square feet of coverage
• Segmented Fresnel lens provides optimum sensitivity and performance
• Horizontal field of view may be adjusted between 180 degrees and 32 degrees of arc
• Ambient light override can be set to prevent activation if sufficient ambient light is available
• Leviton offers a wide selection of motion sensors that use passive infrared, ultrasonic or a combined multi-sensing technology

User questions & answers

Question:	What is the warranty on this? Mine stopped working
Answer:	The instruction manual says 5 year warranty.
Question:	Is a neutral line required
Answer:	No, the other answers are wrong. I've installed 2 of these and the manual that it ships with shows that it is powered through the ground wire, and if you watch the install video here on amazon it also shows the same.
Question:	will thsi work in Europe
Answer:	all depends on your voltage in Europe. Seems to me if it is 110 to 277 volts there should not be a problem. anything more than that and it probably will not work. best bet would be get ahold of Leviton.
Question:	Hi, can i use them in 3 way? I need to place one on the top and another one on the bottom of my stairs
Answer:	Yes according to the instruction manual here: http://ecx.images-amazon.com/images/I/71rJUsXIQ3S.pdf (link above feedback on Amazon) Connect Black to blacks. Connect the blue wire on each to the black wire going to the light. That will allow both to sense motion at same time. Can also be used with a normal 3 way switch where blue is the carrier wire.

Product features

Leviton ODS10-ID Decora Wall Switch Occupancy Sensor

The Leviton ODS10-ID Decora wall switch occupancy sensor is the ideal energy-saving choice to provide automatic (auto on/off and manual on/auto off) lighting control in a variety of commercial and residential applications, including offices, conference rooms, multimedia rooms, child-care centers, and more. The ODS10 is the perfect solution for controlling a wide variety of load types. It features a low-profile digital design and vandal-resistant PIR lens. It does not require a neutral connection, and it installs in place of a single-pole wall switch to fit in a standard wall box.

Automatic Lighting Control for Energy Savings

It's well-known that turning off the lights when leaving the room is one of the simplest ways to cut down on energy usage. Yet it's not always convenient or easy to remember, especially in places where a variety of people are coming and going throughout the day.

The ODS10-ID helps eliminate the problem of load type selection by providing automatic control of incandescent lamps, fluorescent, and low-voltage lighting with electronic or magnetic ballasts. It provides an adjustable 180-degree field of view with optional adjustments for sensitivity, ambient light override, and delayed off time. The unit also features a manual override switch that can be used to keep lights off while an area is occupied, which may be desired in conference rooms and other areas during slide or film presentations.

For increased energy savings, the ODS10-ID offers a light sensor which provides an ambient light override option that can be set between two and 500+ foot-candles at full brightness to prevent the sensor from switching lights on when there's sufficient sunlight, regardless of occupancy.

About PIR Technology

The ODS10-ID uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. The lights will remain on as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied for the preset time you've chosen, the unit will switch the lights on.

Long Life and Automatic or Manual Operation

To ensure longer service life and compatibility with electronic ballasts, the ODS10-ID carefully times its switching-contact opening and closing with the zero crossing point of the AC power curve (Zero Crossing Technology). Additionally, a latching relay provides prevents product failure when used with high inrush loads.

For manual control, the ODS10-ID features a convenient push-button switch. If the lights are off, pressing the button will turn lights on and keep them on for as long as the room is occupied. This mode is ideal for areas where manual on switching is required but automatic off switching is desired for energy savings (CEC Title 24 Compliant). Lights can also be turned off manually at any time by pressing the push button.

For three-way and four-way control, the ODS10-ID features multi-location capability, where multiple sensors can work with one load. Multiple sensors are wired together with the load to turn the lights on. Both sensors must time out or both manual buttons must be pressed for the lights to turn off.

Compliancy and Warranty Information

UL-listed and CSA certified, the Leviton ODS10-ID Decora wall switch occupancy sensor complies with California Title 24 Energy Code and FCC regulations, and is backed by a five year limited warranty.

Product description

Specifically designed for long, relatively narrow spaces such as hallways and corridors, the OSWLR-I occupancy sensor provides long range and high sensitivity. The OSWLR-I occupancy sensor is a "long range" lens. This lens provides coverage up to 100 ft. When mounted 10 ft. Above the floor. Can be mounted lower if needed. The mounting base, provided with the sensor, allows quick and easy mounting in corners, on walls or on ceilings. The most common applications are factory storage areas, warehouse aisles and corridors. PIR long range aisle, 8-degree, 100ft x 14ft @ 10ft height sq. ft. coverage, self-adjusting, wall mount occupancy sensor, commercial grade - white. The OSWLR-I Sensor combines PIR technology with a microprocessor based digital architecture. By eliminating false triggering, the sensor provides a trouble-free "install and forget" solution for lighting control.

• Self Adjusting Timer: Timer is factory set at 10 minutes. But user can easily select 30 sec - 30 min using internal controls. Sensor may increase timer automatically through self-adapting features to meet room or occupancy patterns
• Use in aisles, long corridors and hallways
• Fast, Simple Installation: Easy base mount, three wire connection (low voltage) and twist-and-lock detector attachment
• Self-Adjusting and Self-Calibrating: Internal microprocessor continually analyzes, evaluates and adjusts the infrared sensitivity - Passive Infrared Technology (PIR)
• Ambient Light Recognition: A photocell prevents lights from turning on when the room is adequately lit by natural light - both "occupied" and low-light-level and occupied" lights-on control wires are supplied

Product description

Decora Motion Sensor. 180 Degree PIR auto-on wall box sensor, single pole or 3-way when used with a 3-way switch, 150W LED/CFL, 600W incandescent/halogen, wallplate sold separately – White, Ivory & Light Almond.

• CONVENIENT - Detects motion and turns lights ON/OFF automatically
• ENERGY SAVING – Helps prevent lights from being left on when room is vacant
• FLEXIBLE – Single Pole or 3-way installation when used with a 3-way switch
• PRACTICAL – Allows the light to be dimmed
• VERSATILE – Ideal for areas like the garages, pantries, utility and laundry rooms

User questions & answers

Question:	Since the ipsd6 has a triac switch instead of a relay switch in ips02, is there an audible "click" noise for the ipsd6 when it turns on and off
Answer:	No, I don't hear an audible "click".
Question:	can this be programmed for manual on automatically off
Answer:	You want the IPV02 model for that. https://www.amazon.com/Leviton-IPV02-1LW-300-Watt-Incandescent-150-Watt/dp/B00BUZQVAW/ref=sr_1_1?s=hi&ie=UTF8&qid=1476726052&sr=1-1&keywords=ipv02
Question:	Does this switch gradually fade on and fade off when turning on due to motion and off due to lack of motion (after programmed delay
Answer:	When turning on it will brighten to the last setting you had on the dimmer or all the way bright if that is what you had. It also dims to the off position when turning off. As an aside, it does not work properly with LED bulbs. They will not turn off.
Question:	Motion works, but won't turn off completely. just dims. Thus light is on all the time- any way to get it to automatically turn off to darkness? Thanks
Answer:	I agree with N. Schmidt, Mine worked perfectly with a 60 Watt equivalent LED bulb but when I lowered to 40 Watt equivalent, they stay on, ever so dimly. "Your wiring is probably correct. This happens with high-efficiency LED bulbs - instead of a relay which would be like disconnecting at the wall, this switch works like pinching a garden hose almost but not completely off. Quieter operation but not completely shut off. It's been reported elsewhere in reviews for this product. Since the dimmed LED is only using a watt or so I guess it's not a big deal. Would be annoying if it's in an open area. My switch controls the lights in my laundry room behind a door so I don't see the dimly lit lamp." By N. Schmidt on October 30, 2014

Product description

Decora Motion Sensor. 180 Degree PIR auto-on wall box sensor, single pole or 3-way when used with the IPV0R companion sensor remote, 600W LED/CFL, 1800W incandescent/halogen, 1800VA fluorescent ballast, 1/2 HP motor, wallplate sold separately – White, Ivory & Light Almond.

• CONVENIENT - Detects motion and turns lights ON/OFF automatically
• ENERGY SAVING – Helps prevent lights from being left on when room is vacant
• ADVANCED – Prevents automatic ON when space has ample natural light
• FLEXIBLE – Single Pole or 3-way installation when used with the IPV0R companion sensor remote
• VERSATILE – Ideal for areas like the garages, pantries, utility and laundry rooms

User questions & answers

Question:	In a 3 way installation it's mentioned you need ipv0r sensor remote. is that another switch or will any switch work in 2nd location
Answer:	Any switch will work in the 2nd location. However, if you turn off the 2nd location switch, the sensor remote won't work, until you turn the other switch on.
Question:	will heat from a parked car engine prevent it from turning off
Answer:	It doesn’t in my garage. You can adjust the sensitivity. I find that the trigger is more the movement of the IR source that triggers. If I sit in a chair and don’t move for 15 min, the lights go off. If I park a vehicle right in front of the switch the lights will go off after the time out. So static heat source is not a trigger.
Question:	It is can be work at 220 Voltage
Answer:	It is not specified to work at that voltage
Question:	How much distance will this detect
Answer:	I do not idea about the distance in perpendicular direction. My sensor is installed in a narrow corridor so the detection is done on an inclined plane. The detection range in that situation is about 2 meters.

Product description

Leviton IPS06-1LW 600-Watt Incandescent, 150-Watt LED Occupancy Sensor (Auto ON/Auto OFF), Single Pole or 3-Way, White. Compatible with Decora screwless snap-on wallplates (sold separately).

• Automatic ON/Automatic OFF provides 180-Degree field of view and 900 square feet of coverage
• 600W Incandescent/Halogen, 150W LED/CFL loads. No Neutral or ground wires required for installation
• Single Pole or 3-way when used with a 3-way switch
• Ambient light sensitivity prevents lights from automatically turning ON when there is ample natural sunlight

User questions & answers

Question:	Will this switch cause the 4’ fluorescent lights to flicker? The lights didn’t flicker prior to installing this switch
Answer:	Yes definitely. Fluorescent lights are not dimmable so when you have this switch set to anything below 100% it’s not allowing the ballast in the fluorescent fixture to provide enough power to the bulb to function properly.
Question:	anyone had a problem with it not turning off
Answer:	I had the same problem but fixed it with a higher watt bulb. A 15 watt bulb works for me!
Question:	I am gonna use 2 of these on one light, would you please refer me to the appropriate schematics to make sure I hook up everything properly
Answer:	If you are talking about a 3-way switch setup (where either switch can turn the lights on or off), you can only put one of these on the circuit. The other switch has to be a standard 3-way switch with modified wiring.If you want something where either motion sensor can turn on a light but not necessarily turn it off, that would be possible. In that case you just have to put the two motion sensors in parallel to the light.
Question:	When the second, standard, switch is turned off, the motion sensor goes dead. Neither manual nor sensor ON works. If I turn on the 3way, it works
Answer:	The instructions provided are confusing, but the upshot is that you do not wire this motion sensor in a standard 3-way configuration, but instead have to re-wire the other 3-way switch on the circuit. Basically you have to permanently connect the common wire to one of the travelers on the normal 3-way switch. The motion sensor then can detect the state of the other switch, while also continuously getting power itself, and then it can turn the other traveler on or off appropriately to achieve a '3 way switch effect'. It's doing something more clever and complicated than simply being a traditional 3-way switch, but the instructions do no make this clear, and thus are really pretty confusing at first if you are either expecting a normal 3 way config, or are hoping to just install this as a drop-in replacement for an existing standard 3 way switch.

Product description

Leviton OSC20-M0W Ceiling Mount Occupancy Sensor, Multi-Technology, 360 Degree, 2000 sq. ft. Coverage, Self-Adjusting, White

• Learned and adjusted settings saved in protected memory
• Select the approximate area needed. Units from 500 to 2000 sq. ft. available
• Accurate, consistent switching: occupant complaints are eliminated; lights are on when room is occupied, off when empty. Annoying false-offs are minimized and lights on at night is eliminated.
• Ambient light recognition: the photocell prevents lights from turning on when room is adequately lit by natural light.
• Fast simple installation: easy ceiling mount, three wire connection (low voltage) and twist-lock sensor attachment
• Maximum reliability, low cost: all digital circuitry uses a minimum of components.

User questions & answers

Question:	Candice sensor be set to dim the lights when vacant or will it only turn the lights completely off
Answer:	The sensor will only turn the lights on or off.
Question:	Can the osc20-m0w ceiling mount occupancy sensor be used to control 3 separate single phase 20 amp circuits and how can this be done
Answer:	oh yea. you can use this sensor to energize a 3-pole lighting contactor or what we call a "definite purpose contactor" rated @ 20-30 amps with a 120 volt coil and run your circuits thru that and its just like one big switch. very simple. these contactors you can get for $25-30 open type and mount in small enclosure or deep junction box.
Question:	How can you turn this off if you don't want the light to come on
Answer:	I wired this between the lights in the room and a regular wall switch. If I do not want the lights on I just put the wall switch to off position
Question:	We have one of these in our office. When we're all at our desks working, the lights constantly shut-off. How do we keep the lights on for 8 hours
Answer:	The timer can be set for 30 seconds to 30 minutes. The detector may not be in range of the working area. Either relocate the detector or add another detector.

Product description

The OSFHU high-bay occupancy sensor is specifically designed for high mounted areas such as warehouses, manufacturing and other high ceiling applications. The OSFHU installs directly to an industrial fluorescent luminaire or an electrical junction box. It is a self-contained sensor and relay that turns individual light fixtures on or off based on occupancy in the detection zone. It comes with three interchangeable lenses for use in either a 360-degrees high-bay or 360-degrees low-bay general area or an aisle way. The OSFHU provides reliable coverage up to 40 ft. Mounting heights. The OSFHU is also available in a model for cold storage applications with temperatures as low as -40-degrees f. To improve the field-of-view for deep body fixtures, a separate offset adapter accessory (OSFOA-00W) can be used to position the sensor below the fixture body. The adapter simply snaps into a 1/2-inch knockout on the end of the industrial fixture to attach the sensor. Fixture-mounted PIR high-bay sensor with 3 interchangeable lenses, white.

• Passive Infrared Technology (PIR)
• Fast, simple installation
• Zero-crossing circuitry
• Green LED indicates occupancy detection
• Interchangeable lenses for 360 degrees high-bay, 360 degrees low-bay, and aisle way patterns
• Operating frequency : 50/60Hz
• Passive Infrared Technology (PIR)

User questions & answers

Question:	Will this work for a 95 watt led fixture
Answer:	If your LED is dimmable then this will work. Not sure how your fixture will respond if it isn’t dimmable.
Question:	If the sensor fails, will the light come on or stay off
Answer:	Normally if this type of sensor fails the light will not come on. You can tell if the sensor detects motion by an LED that flashes inside the dome. I would see no reason the unit could not be used in stairwells or egress areas unless a local code requires those areas to be lit continuously. I have also not tried these with any fixtures with battery backup built in.
Question:	Can this be wired directly to a regular overhead five bulb light fixture used in a closet--not a flourescent tube light? how long are the wires
Answer:	no.
Question:	Is there day light sensor to prevent turn on at day time
Answer:	The best way to keep the light from coming during daylight hours is to install an electric timer in line before the sensor. You can set the timer for the hours that you want the light to operate as the season change you can reset the timer accordingly.

Product features

OSFHU-ITW Ceiling Mount PIR Occupancy Sensor

The Leviton OSFHU-ITW fixture mount high bay occupancy sensor uses passive infrared (PIR) detection technology to monitor a room for occupancy, turning the lights ON when movement is detected. This efficient energy-saving, automatically-switching device is ideal for large, open spaces illuminated by industrial fluorescent luminaires such as warehouses, manufacturing floors, gyms, and other high-ceilinged commercial and industrial applications.

The OSFHU-ITW installs directly to an industrial fluorescent luminaire or an elec¬trical junction box. It is a self-contained sensor and relay that turns individual light fixtures On or Off based on occupancy in the detection zone. It comes with three interchangeable lenses for use in either a 360° high-bay or 360° low-bay general area or an aisle way. The OSFHU provides reliable coverage up to 40 ft. mounting heights. Offering simple On/Off switching based on occupancy, the OSFHU-ITW is ideal for:

- Warehouses

- Manufacturing floors

- Gyms

- Industrial plants

- Storage facilities

- Stadiums

About PIR Technology

The OSFHU-ITW uses passive infrared (PIR) detection technology via a segmented Fresnel lens to monitor a room for occupancy. This specialized lens divides the field of view into sensor zones. When a person passes into or out of a sensor zone, the sensor detects motion and switches the lights on. The lights will remain on as long as there is an occupant in the room. When the space being monitored by the sensor is unoccupied for the preset time you've chosen, the unit will switch the lights on.

Advanced Features

- Fast, simple installation: mounts directly to an industrial fluorescent fixture or an electrical junction box through a standard ½ inch knockout made using provided lock-nut

- Quicksnap: built into the ½ inch nipple, this locking mechanism allows for the fastest and easiest mounting not requiring a threaded lock-nut

- Fast, easy time delay setting: can be set at any time without requiring power to the sensor; time delay is variable from 30s-20m

- Instantly verify fixture operation and wiring connections: “instant On” closing relay fires lamps in under 5 seconds

- High Inrush Stability (H.I.S.) Technology: Zero crossing circuitry optimizes relay operation for reliable, long-life protection and robust mechanical latching relay is durable for all load types

- Auto temperature calibration: automatically adjusts the PIR sensitivity as ambient temperature rises to increase detection of heat movement through the field-of-view

- Return to last state: for safety and energy savings, the OSFHU contains a latching relay so that in the event power is lost to the device, the device will return to the last known state of the relay

- False detection intelligence: for increased energy savings and to mitigate nuisance tripping, the super-bright LED indicates advanced detection has been activated and the lights will only turn On when true occupancy has been determined

- UL/cUL listed and backed by a five year limited warranty.

Product description

Smart Wallbox Sensor, PIR 15A Switching, 120-277VAC, App Configurable with the Smart Sensor App, White

The Leviton ODS15 Decora Passive Infrared Wall Switch Occupancy Sensor provides automatic lighting control, and is useful for a variety of commercial and residential settings. This switch utilizes two passive infrared (PIR) sensors and is compatible with both electronic and magnetic ballasts. Two operating modes respond either to all motion or to changes in ambient light. A pre-shutoff warning, manual override, walk-through feature, and an adjustable field-of-view provide multiple options to satisfy your real-world lighting conditions.

Adjustable Lighting for Multiple Settings

When this switch is installed, lights will turn on as motion is detected, providing a safe environment for personnel who might otherwise walk into a darkened room. Change the settings and the switch relies on ambient light before switching on. A manual override makes it possible to toggle the lights on or off like a regular switch, or set a manual on/auto off to satisfy certain building codes.

The ODS15 has adjustable blinders so you can get only the PIR sensitivity you need. You can save additional energy by changing the delayed-off from 30 minutes to 30 seconds with the time delay adjustment. For supreme user convenience, this switch requires a single screwdriver for easy installation.

No More Blackouts and No Unnecessary Lighting

Factory set for a 10-minute delayed-off time, the switch self-adjusts up to 30 minutes to compensate for real-time occupancy patterns. It beeps three times as a warning shortly before shutting off the lights, giving you a chance to reactivate the sensor. The unit also offers a walk-through feature that shuts lights off after momentary occupancy, providing increased energy savings.

Durable and Versatile Design

The ODS15 is compatible with both electronic and magnetic ballasts. The sensor switches on or off at the zero crossing point of the AC power curve for contact durability and compatibility with electronic ballasts. Useful with 120- to 227-volt lighting, the circuitry in this switch is specifically designed to handle today's high inrush of electronic ballast loads. For retrofitting into older wiring systems, neutral-free wiring is an option.

This product comes with a manufacturer's limited five-year warranty.

What's in the Box

The ODS15 Decora Passive Infrared Wall Switch Occupancy Sensor, mounting screws, and installation instructions.

From the Manufacturer

Leviton's ODS15 - ID Decora (R) wall switch passive infrared ( PIR) occupancy sensor is used to provide automatic lighting control for energy savings and convenience in a variety of commercial applications, including:- small offices - conference rooms - storage areas- restrooms - class rooms - lounges the ODS0D- ID provides automatic switching of two separate lamps and low-voltage lighting with electronic and magnetic ballasts. The unit also features a manual override switch that can be used to keep lights off while an area is occupied, which may be desired in conference rooms and other areas during slide or film presentations. The unit installs in place of a single-pole wall switch and fits in a standard wall box. The unit requires a ground connection. Decora passive infrared wall switch occupancy sensor, 180-degree, 2100 sq. ft. coverage, self-adjusting, commercial grade - white. Wall Plate not included with Occupancy Sensors. Decora is a registered trademark of Leviton Mfg. Co., Inc.

• Combines occupancy/vacancy sensing with ON/OFF switching
• Customize spaces with easy programming and configuration from a smart device. The Smart Sensor App can be used to configure and enable additional features like sensor sensitivity, timeouts, daylighting and more. Smart Wallbox Sensors also feature an out-of-the-box default mode for auto-ON/auto-OFF operation with a 20-minute timeout as well as convenient pushbutton programming for common room settings.
• Select the operating mode for auto-ON/auto-OFF (occupancy) or manual-ON/auto-OFF (vacancy) using the Smart Sensor App.
• Adjust sensor sensitivity and timeouts using the Smart Sensor App.
• Enable the integrated photocell for daylighting hold-OFF capabilities with the Smart Sensor App. No additional components required for a simple, complete lighting control solution.

User questions & answers

Question:	Does ods15-idi work with alexa
Answer:	No. It does not have a means of connectivity beyond electrical power. All its "smarts" amount to standard internal control functions.
Question:	Is the beep warning annoying? Can it be overridden
Answer:	Leviton appreciates your questions and feedback. Our ODS15-IDW does beep, though I have not heard it described as annoying. It cannot be overridden. Our ODS10-IDW has the same features and field of view, minus the beep. We take pride in providing a quality product, and would appreciate an opportunity to address your concerns. For assistance selecting an appropriate product for your application, please reach out to our Customer Service team at 800-323-8920. Leviton Customer Support
Question:	Can this be used on a 1500 watt space heater
Answer:	SPECIFICATIONS ELECTRICAL Line Voltage 120-230-277 VAC Power Consumption 120V - 120mW; 277V - 280mW Operational Frequency 50/60Hz Wire Designation Line—Black, Load—Blue, Ground—Green No Neutral Required Load Rating Fluorescent: 1800VA @ 120V 4000VA @ 277V Incandescent: 1800W @ 120V Motor: 1/4 HP @ 120V It may be possible to operate a portable heater that is less than 1800 watts. However, is this the correct product for what you intend to do? When one enters a room, it will sense that and turn on the circuit. But after a time delay if there is no motion, it will turn off the circuit.
Question:	can this switch be used in a 3-way configuration
Answer:	Not easily and not with a regular 3 way switch...requires another switch like this one and requires extensive wiring, wouldn't want to do it in an existing structure. HTH

Product features

Smart Wallbox Sensors

Elevate your sensing control options