14 best ore dimmer switches

Product description

Headlight Dimmer Switch

1958-82 GM Vehicles

12-Volt

• 1958-82 GM Vehicles
• 12-Volt

Product description

Decora Slide Dimmer. 600W-120VAC incandescent, and 300W-120VAC dimmable LED and CFL, 60Hz. Single pole or 3-way control when used with 3-way switch. Comes with white faceplate installed, optional ivory and light almond faceplates included. Wallplate sold separately. Can be used to comply with 2016 California Title 24, Part 6, Indoor Lighting Switching Devices and Controls. No fins for multi-gang installation.

• INNOVATIVE - Designed to dim LED bulbs; For the best bulb pairings, refer to the "comparison chart" in the technical specification section below
• FLEXIBLE; Can be used in a single pole or 3 way installation (with a 3 way switch, sold separately); No neutral wire required for installation
• CONVENIENT; Separate ON/OFF rocker switch allows you to set and keep preferred dimming level; Built-in radio/TV interference filter
• ADVANCED; Adjustment switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels
• STYLISH; Complements with leviton decora plus screwless and Decora standard designer wallplates, sold separately

User questions & answers

Question:	How long is the warranty period
Answer:	it says 5 yr in description specifications , which is it please
Question:	I want to use this for a 3 way switch. Can the other 3 way switch be a standard Leviton switch (what's already there
Answer:	Yes it should work
Question:	Has anyone had an issue with your led's remaining slightly on when this switch is in the off position
Answer:	When the locator light is in the ON position, a very small amount of current is passed through the LED bulb. Very sensitive LED bulbs may appear to glow from this current. To fix, turn the locator light to the OFF position.
Question:	I have dimmable leds, but. They don't dim very low, and at high end they flicker, any help
Answer:	Unfortunately, not all "dimmable" LED lights are "made equal" NOR are all "dimmers" made equal. I continue to have a very similar problem with this dimmer and my dimmable LEDs as well. I have a little background in electronics and have concluded that in my case, there is simply a problem with the Leviton dimmer design. One thing I did while testing my problem, might help diagnose the problem your are having. Note that the spec on the dimmer is "300-Watt LED". Check that the total "load" on the dimmer is

Product features

Multiple Locations

Perfect in large areas or hallways/staircases that have two switches that control

the same light(s).

Leviton Dimmers Put You In Control

Set the mood by adjusting the light level for any activity. Whether you are

entertaining, reading, keeping the little ones safe from bedtime “monsters” or watching the latest flick, you're in control.

Superior Performance

Take advantage of the full dimming range of your bulb by adjusting the minimum

light level on the dimmer.

Compatibility is Key

To achieve the best dimming performance, ensure that the bulbs are compatible.

Download the “comparison chart” in the technical specification section below to see the best pairings for this dimmer.

• Wall Dimmer Switch with Dimmable Slide: Our Wall Dimmer Switch with Dimmable Slide is compatible with up to 200 Watts of dimmable LED/CFL bulbs and up to 600 Watts of incandescent and halogen lamps. Press the rocker switch of the dimmer, turn power on or off. Move the slide control lever up to increase brightness, move down to decrease brightness. It doesn’t get easier than that! For your safety, this fixture is ETL certified.
• Simple and Easy Installation: This stylish, modern light switch is very easy to install, and mounts just off the wall. It only requires one person to install and can be done in a matter of minutes. Full instructions provided, with decorative wall plate and mounting screws included; 3 Year Limited Warranty against Defects in Materials and Workmanship.
• Best Dimming Performance, Without Flicker: Flickering lights are not only bad for your eyes, they also cause long lasting headaches. If your bulbs do not dim to your satisfaction, especially the dimmer range and minimum brightness level, use the adjustment button of the dimmer after installed for your desired lighting result. This product will help you set the mood and create a nice living environment for your home or office, without buzzing or flickering.
• Single Pole and 3 Way Compatible: This slide control LED dimmer switch can be used in single pole or 3-way applications, making multi-location dimming achievable and satisfying all your requirements.
• Sleek Design: Modernize any space with this cool, contemporary light switch. No screws are needed to mount the wall plate, giving the switch a clean look and smooth finish that allows it to seamlessly blend into its surroundings. The sleek white design is suitable for all internal rooms such as kitchen, lounge and bedrooms, as well as business environments such as restaurants, bars, cafes and all office spaces.

Product description

Lutron LED+ dimmers provide the best dimming performance for LED bulbswhile setting the right light level to improve mood and ambiance for any activity. Designed specifically for dimmable lads and CFL, as well as for use with traditional incandescent and halogen bulbs, they greatly improve the dimming performance when compared to standard dimmers. Featuring advanced circuitry designed to alleviate common challenges, like flicker and pop on, LED+ dimmers are compatible with 800+ bulbs- for more specific details on compatible bulbs, view "technical specification" below. The Diva dimmer matches existing decor a style switches and fits in a standard decor a style wall plate (CW-1-WH). It features a large paddle switch that turns the lights on/off and returns them to your favorite preset setting, along with a discreet slider that brightens or dims the lights to suit any activity.

Create the perfect amount of light while utilizing the latest energy-saving technology with the Lutron Diva C•L Dimmer. Designed for use with 150-watt dimmable CFL or LED lights, the Lutron Diva C•L dimmer features a large paddle switch that automatically returns to your favorite pre-selected light level, a discreet slider to adjust light levels, and a sleek, modern wallplate.

Diva C•L Dimmer At a Glance: Dimmer works with most dimmable CFL/LED bulbs, as well as incandescent and halogen bulbs Slider for precise light control and paddle switch for easy on/off HED technology improves the performance of dimmable CFLs and LEDs over standard dimmers Adjustment dial to set bottom of dimming range for your bulb type Single-pole and three-way applications One-year limited warranty; UL-listed for a broad range of dimmable CFL/LED bulbs

Adjustment dial fine tunes dimming range for your specific bulb.

The C•L Dimmer works with a combination of CFL, LED, halogen, and incandescent bulbs and can be used on the same circuit.

Precise Light Adjustment with Slider

Whether you're reading, watching TV, entertaining, or enjoying a romantic dinner, the Lutron Diva C•L Dimmer lets you choose the right level of light for your activity. It's easy to make subtle adjustments using the discreet slider next to the large paddle switch. When you use the paddle switch to turn lights off and on, it defaults to your preferred lighting level.

Works with Dimmable CFLs and LEDs for Increased Energy Savings

The Lutron dimmer works with dimmable CFLs and LEDs up to 150 watts, a great energy-efficient alternative that can last up to 10 times longer than incandescent bulbs. Plus, by using less electricity, theses bulbs help protect the environment by reducing the amount of carbon dioxide released into the air.

HED Technology for Enhanced Performance

Thanks to Lutron's HED technology, this dimmer actually improves the performance of dimmable CFLs and LEDs compared to standard dimmers by eliminating flicker, ensuring lights stay on when they are dimmed to a low level, and making sure lights operate properly at all levels. Lights will stay on even during voltage fluctuations, which can happen when a device like an air conditioner or a hair dryer is operated nearby. For safety, the dimmer is UL listed for a broad range of dimmable CFL and LED bulbs.

Compatible with Other Lightbulbs and Mixed Loads

For added functionality, the dimmer also provides full-range dimming for halogen and incandescent bulbs. There is an adjustment dial to set the low end of dimming range for your bulb type for most efficient operation.

The dimmer also works with a mixed load of light sources, so a combination of CFL, LED, halogen, and incandescent bulbs can be used on the same circuit. It can be used for single-pole and three-way applications.

Fast and Easy Installation

Installation is easy--just replace your existing light switch with the Lutron Diva C•L Dimmer and install in less that 15 minutes. A modern wallplate--with no visible screws--blends into the surrounding wall for a subtle finishing touch.

The Lutron Diva C•L Dimmer is backed by a one-year limited warranty.

What's in the Box

Dimmer and screwless wallplate.

Set the perfect mood lighting for any room with the Diva C•L Dimmer.

From the Manufacturer

Control the next generation of lighting with Lutron's dimmable C.L dimmers! Screw-in dimmable compact fluorescent lamps (CFLs) and screw-in dimmable light emitting diode lamps (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, dimming them may be difficult. Lutron's new dimmers with HED Technology provides a solution to alleviate your dimmable CFL and LED dimming challenges, while setting the right light level to improve mood and ambiance. The Diva dimmable CFL/LED dimmer with HED Technology features advanced dimming circuitry that is designed for compatibility with most high efficacy light bulbs. With the same features as Lutron's Diva dimmer, the large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light level to suit any activity. These dimmers improve the dimming performance of dimmable CFLs and LEDs compared to standard dimmers. Lutron dimmers with HED Technology also provide full-range dimming for halogen and incandescent bulbs, ensuring today's dimmer is compatible with tomorrow's light sources. The dimmer can even dim a mixed load of light sources (i.e. LED and halogen or CFL and LED bulbs on the same circuit).

• Provides the best dimming performance for LED bulbs(for list of approved LEDs, see 'Technical Specification' below)
• For use with up to 150-Watts of dimmable LEDs or up to 600-Watts of Incandescent or Halogen bulbs
• Features a large rocker paddle to turn lights on/off or to preset level and a discreet slider to brighten/dim lights to suit any activity
• Can be used in single-pole or 3-way applications
• Installs in as little as 15 minutes. Operating temperatures 32 °F to 104 °F (0 °C to 40 °C)
• Includes Diva LED+ (formerly C.L) Dimmer Switch and coordinating wallplate

Product features

Lutron LED+ Dimmers provide over 250 lighting levels, so you can set the right light for any activity

• Large paddle switch to turn lights ON/OFF
• Sleek slider on the side to manually dim or brighten lights
• Technology that allows for smooth dimming of the broadest range of LEDs
• Patented technology to optimize the dim range of your bulb and prevent interference with other dimmers in the home
• Tried and true aesthetic to match designer/decorator style switches and accessories

Cutting Edge Technology

Our easy-to-set adjustment lever allows you to change the low end of dimming and set the optimum dim range for your bulbs.

Control up to 17 Bulbs

Each Lutron LED+ Dimmer can control up to 17 bulbs, and is the only dimmer UL listed to control mixed loads (different types of bulbs, such as LEDs and halogens, on the same circuit)

Blend In or Stand Out

Available in 25 colors so you can choose a finishing touch to your room that seamlessly blends in or a color that is meant to pop

Works Well with LEDs

Tested on 1,000’s of bulbs and dozens of brands to ensure flawless dimming. Check out our website for our list of recommended bulbs

Product description

Leviton Decora SureSlide dimmers provide smooth, slide-action, full-range dimming for incandescent and dimmable LED and CFL lamps. Featuring a pre-set On/Off switch, this device allows the user to set the desired brightness level to operate automatically with the On/Off function. The dimmer is designed specifically for dimmable light-emitting diodes (LED) and dimmable compact fluorescent (CFL) lamps; It is also compatible for use with incandescent lamps. Note: Flickering means that the bulb being used is not compatible with our device. In the technical specifications section, the application guide is a list of bulbs that Leviton has confirmed will work with our device. Kindly refer this guide for better use.

• Future proof to control a variety of dimmable CFL and LED lamps
• Integrated linear full range slide control for easy, precise operation
• Backwards compatible with incandescent lamps
• CFL mode for dimmable CFLs; This feature provides a higher starting voltage that is required for many compact fluorescent lamps
• LED/Incandescent mode provides optimized dimming for LED lamps and for incandescent operation
• See LED bulb compatibility in the technical specifications below (comparison chart PDF)
• Wallplate sold separately

User questions & answers

Question:	I plan on using this with a track lighting kit that uses dimmable leds. do i need anything (transformer?) between this switch and the track fixture
Answer:	It would depend on the rack light system you use. If it uses 120v lamps then no. if it is a lower voltage lamp system it would have its own transformer as part of its installation and this dimmer is probably not what you need. You would then want a dimmer designed for low voltage applications. As far as I know though there is no hard and fast rule on this today as all the dimmers and transformers are electronic and may or may not be compatible with other electronic devices including the led drivers fjord the particular lamps in the track system you select. You should consult with the dealer you ate purchasing from and the installing electrician. If you ate doing it yourself you'll need do your research through the manufacturers of the equipment for comparability like the electrician would.
Question:	What size bulb can be used with this dimmer? There seem to be all kinds of size bulbs available
Answer:	That's right in the description: 150 watts LED / CFL, 600 watts incandescent. Just add the power requirements of all the bulbs controlled by the dimmer. For example, I'm using it to control 4 60 watt incandescent bulbs, total 240 watts. For LEDs / CFLs, use the actual power required, not the "equivalency". So a 23-watt CFL that says it's as bright as a 100 watt incandescent still only counts as 23 watts.
Question:	difference in led and incandescent lighting dimmers
Answer:	Some incandescent dimmers modify the output of the power in such a way that it either won't work at all or can damage the LED dimmer. LED dimmers I believe use finer PCM (Pulse Code Modulation) which will work with all dimming bulbs - incandescent, CFL, and LED bulbs. Using LED bulbs with a non-LED dimmer is a bad thing as is using LEDs that are not designed to be dimmed at all. The payback for the additional expense of the LED dimmer is pretty quick if it removes a large enough incandescent light bulb.
Question:	Led dimmable bulb is flickering with this switch, is it bad
Answer:	Problem: Flickering or FlashingPossible Cause #1: Incorrect VoltageLED downlights have a specified input voltage. Incorrect voltage to the driver can cause the LED to flicker or toflash on and off. * Check the input voltage of the driver (Ex: 120V) then check the voltage being delivered to the fixture (Ex: 277V). There may be a mismatch. If possible, replace the driver on the downlight for one with the correct input voltage to match the line voltage or, if that is not an option, install an applicable voltage transformer to the line voltage to achieve the required input voltage for the original fixture.Possible Cause #2: Incompatible DimmerIf the LED downlight was not designed for a particular dimming load or if the driver is not compatible with thedimming control then issues may occur. * Try bypassing the dimming circuit. If the LED functions normally then an incompatible dimmer or dimming load may be the issue or the driver is not a dimming driver. Consult factory to determine whether the driver is dimmable and, if so, what kind of dimmer is compatible with the driver. Please check this web link for a list of factory qualified compatible dimmers: http://www.liton.com/webcatalog/brochures/wp_dimmingfacts.pdfPossible Cause #3: Occupancy Sensor/Control Rated WattageThese controls sometimes have a minimum rated wattage in order to function correctly. For example, theremaybe a minimum of 20W required for the control unit but the LED might only consume 10W. * Add additional fixtures to the circuit to get to the required wattage for the dimming control or replace the dimming control unit with one that has a lower wattage requirement.remedyremedyremedycontinue...TROUBLESHOOTINGLED DOWNLIGHTSA DIVISION OF EEMA LIGHTING GROUP * 5461 WEST JEFFERSON BLVD., LOS ANGELES, CALIFORNIA * PH: 323.904.0200 (1 800 515 4880)FAX: 323.904.0201 (1 800 972 4880)Problem: Flickering or Flashing cont..Possible Cause #4: Dimmer OverloadA common problem with LED dimming is the inadvertent overloading of the LED driver. LED drivers are rated fora maximum load (measured in volts, amps and/or watts) that must not be exceeded.The number of lamps that can be installed on a single-phase control dimmer may seem to be an easy calculation.For example, suppose you want to know how many 15W LED fixtures can be installed on a 600W dimmer. Youmight divide the 600W by 15W and determine that you could control 40 fixtures. Unfortunately, that result mightbe wrong. In fact, you may only be able to use 6 LED fixtures on a dimmer rated for 600W.Even though the LED fixture may draw only 15W continuously, there may be a start-up in-rush current or arepetitive half cycle surge that makes the dimmer think that the current is much higher. That 15W LED fixturemay appear to the dimmer as a 100W incandescent load. If that happens and you are using more than 6 LEDfixtures, you will overload the dimmer.The average start-up or half-cycle stress that has been observed is the equivalent of a 100W incandescent lamp,even for LED loads of less than 20W! * For 10W & 15W Liton -DLV products, consult the charts in the LED Dimming Facts Guide to reference tested maximums by dimmer. * Remove the dimmer from the line to see if the problem is solved. * Change dimmer to one with a higher maximum load. * Split the circuit into multiple loads.Possible Cause #5: Dimmer UnderloadSome dimmers may not perform well if too little load is put on them. A minimum number of fixtures may berequired to operate correctly due to the 25W - 40W minimum load that most incandescent dimmers require tooperate correctly under all conditions. When using incandescent bulbs, the minimum load requirement waseasily met. However, with LED four or more loads may be required for a dimmer to reach the required minimumload. * For 10W & 15W Liton - DLV products, consult the charts in the LED Dimming Facts Guide to reference tested minimum by dimmer. * Remove the dimmer from the line to see if the problem is solved. * Change dimmer to one with a lower minimum load.

Product features

Multiple Locations

Perfect in large areas or hallways/staircases that have two switches that control the same light(s).

Leviton Dimmers Put You In Control

Set the mood by adjusting the light level for any activity. Whether you are entertaining, reading, keeping the little ones safe from bedtime “monsters” or watching the latest flick, you're in control.

Superior Performance

Take advantage of the full dimming range of your bulb by adjusting the minimum light level on the dimmer.

Compatibility is Key

To achieve the best dimming performance, ensure that the bulbs are compatible. Download the “comparison chart” in the technical specification section below to see the best pairings for this dimmer.

• 3-Way Single Pole Compatible Slide control dimmer.If UP is off(DOWN is on) after wiring, try switching around the two red wires to reverse the on/off direction
• Fully compatible with Cloudy Bay LED light fixtures,600W max Incandescent,150W max Dimmable LED/CFL,120VAC,60Hz
• Works with LED,Halogen,Incandescent bulbs - Trim Dial below Cover Plate allows Sensitivity Adjustment upon installation to achieve compatibility with LED Lamps
• Decorative Wall Plate and Mounting Screws Included
• UL Listed,1 Year Warranty. Please contact us if there is any issue with dimming issue.

User questions & answers

Question:	Where is it made? USA
Answer:	No sounds from mine. Make sure your bulbs a dimmable type? Just a guess.
Question:	Are there a 2, 3 snd 4 gang wall plates for these
Answer:	I doubt it, but contact mfg., they are very responsive.
Question:	installed but not turning on when the slide is in between and also hear some sound when you keep your ears on switch in dim mode . anyone else faced
Answer:	Check the display is ON or OFF on the top left connor, it should show ON then the device can work.
Question:	can this dimmer be used on 12 volt LED lamps
Answer:	What I think was being asked is if this meter can tell you the PEAK load during the time it was connected. For example, let's say it was connected to a refrigerator for 10 hours. Let's say that during that 10 hours the load in Watts was 150Watts. But, when the compressor kicks in, it surges to 2000Watts for 3 seconds. Will this device allow you to see that 2000Watt PEAK later? Does it store that PEAK load into memory so you can view it?

Product features

SINGLE POLE/3-WAY CIRCUIT INSTALLATION

• Single Pole: Connect the green dimmer ground wire to ground wire in the wall-box, Connect the black dimmer wire to the hot input wire removed from the switch,Connect either of the 2 red dimmer wires to the light fixture wire removed from the switch,Use wire nut to cap the remaining red wire on dimmer
• 3-Way: Connect the green dimmer ground wire to the ground wire in the wall-box, Connect the black dimmer wire to the TAG wire removed from the switch, Connect the red dimmer wires to the remaining wires removed from the switch

Manual Control

At the low end of the dimming level when the light starts to flicker, fine tune the dimming performance by turning the adjustment dial counter-clockwise so that the light output is stable. Set your slider to where there's no hum or flickering on light fixtures.

Screw-free wall plate

Install the dimmer and mounting frame with the tabs facing down. Put on the screw-free wall plate after tuning the adjustment dial.

Compatible with CFL/LED

Cloudy Bay dimmer improves the compatibility of dimmable CFLs and LEDs compared to standard dimmers by eliminating flicker, making sure lights operate properly at all levels.

Trouble shooting

1: Light flash in the whole dimming range

a. Check the lighting/lamp is dimmable or not

b. The lighting fixture is not compatible with our dimmer

c. Most dimmable LEDs and CFLs will not acheive as low level as incandescent or halogen sources.

d. Control a group of lighting fixtures/lamps with one dimmer may cause flicker due to variation of dimming circuit and dimming range. Please use dimmer to

control lights/lamps in the same type or same model.

2. Light flash in low dimming range

a.Slightly turn the adjustment dial counter- clockwise to achieve full compatibility with the lights

3. Get dimmer list from light bulb/lighting fixture's supplier to avoid compatible issue with our dimmer, a broad dimmer list means less dimming issue, such as flicker,buzz, or flash issue, also, better buy FCC compliance lighting product for stable performance.

Product description

ELECTECK Dimmer Light Switch, for Dimmable LED, CFL, Halogen & Incandescent Bulbs, SiAngle Pole or 3-Way, Screwless Wall Plate Included, UL Listed, White

ELECTECK dimmer switch can enhance any family activity in your home by providing just the right light, at the touch of a finger.

Creates the perfect light whether you’re tackling homework, sitting down to dinner, watching a movie, or sneaking in a late-night snack.



Universal Compatibility

Works with dimmable LED/CFL bulbs (up to 150W) and incandescent/halogen bulbs (up to 600W).

Tested on thousands of bulbs and dozens of brands to avoid flickering.

Adjuster allows sensitivity adjustment to achieve wider dimming range with different lamps.



Easy to Install

No neutral required.

Can be used single pole or 3-way dimming applications.

Child-safe screwless wall plate included.



Certificate and Warranty

UL certified, 3-year worry-free warranty.

• ⏩ 120VAC/60Hz, works with dimmable LED/CFL bulbs (Up to 150W) and incandescent/halogen bulbs (Up to 600W), saving energy and creating the perfect light for illuminating system
• ⏩ No Neutral required, easy to be installed in single pole or 3-way application where the lights are controlled from one or two locations. Use ONLY one dimmer switch in a 3-way circuit
• ⏩ Universal lighting control with side slider and adjuster, allowing sensitivity adjustment to achieve wider dimming compatibility with different LED bulbs
• ⏩ Features a large rocker paddle switch to turn lights On/Off easily at the touch of a finger
• ⏩ Decorative screwless wall plate included. UL listed. 3-year worry-free warranty: please contact ELECTECK if any issue with installation or dimming.

Product description

1947-55 Truck Headlamp Dimmer Switch - 6 Volt

Product description

ELECTECK Dimmer Light Switch, for Dimmable LED, CFL, Halogen & Incandescent Bulbs, Single Pole or 3-Way, Screwless Wall Plate Included, UL Listed, White

ELECTECK dimmer switch can enhance any family activity in your home by providing just the right light, at the touch of a finger.

Creates the perfect light whether you’re tackling homework, sitting down to dinner, watching a movie, or sneaking in a late-night snack.



Universal Compatibility

Works with dimmable LED/CFL bulbs (up to 150W) and incandescent/halogen bulbs (up to 600W).

Tested on thousands of bulbs and dozens of brands to avoid flickering.

Adjuster allows sensitivity adjustment to achieve wider dimming range with different lamps.



Easy to Install

No neutral required.

Can be used single pole or 3-way dimming applications.

Child-safe screwless wall plate included.



Certificate and Warranty

UL certified, 3-year worry-free warranty.

• ⏩ 120VAC/60Hz, works with dimmable LED/CFL bulbs (Up to 150W) and incandescent/halogen bulbs (Up to 600W), saving energy and creating the perfect light for illuminating system
• ⏩ No Neutral required, easy to be installed in single pole or 3-way application where the lights are controlled from one or two locations. Use ONLY one dimmer switch in a 3-way circuit
• ⏩ Universal lighting control with side slider and adjuster, allowing sensitivity adjustment to achieve wider dimming compatibility with different LED bulbs
• ⏩ Features a large rocker paddle switch to turn lights On/Off easily at the touch of a finger
• ⏩ Decorative screwless wall plate included. UL listed. 3-year worry-free warranty: please contact ELECTECK if any issue with installation or dimming.

• Suitable for single pole or 3-way applications. One circuit can only install ONE dimmer switch.
• Compatible with max 150W dimmable LED, CFL and 600W halogen & incandescent light bulb
• Precise light control with horizontal slider below the large paddle rocker switch
• Rotating the side adjuster can adjust the dimming range and eliminate buzzing or flickering
• Mid-size screwless wall plate included. UL listed

User questions & answers

Question:	Can I get the 10 pack in Ivory Color
Answer:	Yes, they can be used for recessed LED lights, LED tape lighting, and LED bulbs.

Product features

BESTTEN Modern Dimmer Switch

BESTTEN dimmer switch provides smooth, sliding and full-range dimming performance for dimmable LED, CFL, halogen and incandescent bulbs. The slider can dim and brighten your lights precisely and conveniently, creating a romantic mood or a casual atmosphere for family activities.

• Single pole or 3-way
• No neutral required
• Large ON/OFF rocker paddle switch
• Precise full-range dimming control
• Wide range of compatibility with sensitivity dial
• Mid- size Wallplate included

Troubleshooting

Symptom:

- Bulbs turn off while being dimmed.

- Bulbs turn on at high light level but do not turn on at a low light level, or take too long to turn on at low end.

- Bulbs flicker or flash when dimmed do a low light level.

- Bulbs or dimmers are buzzing.

Solution:

1. Verify all bulbs are marked dimmable.

2. Remove wallplate and locate sensitivity dial.

3. Turn up (counter-clockwise) sensitivity dial slowly until symptom is no longer present.

• EASY TO USE - The dimmer switch achieves full range light control with the on/off switch and a smooth slider, 2 switch types for both single pole and 3 way applications
• CUSTOMIZE THE DIMMING RANGE - The adjustment dial on the side allows you to configure the dimming range for eliminating lamp flicker at the low voltage level, ensures the best performance with LED bulbs
• WORRY-FREE & FLEXIBLE INSTALLATION - All necessaries you need to install is included, 4 wire nut, 2 mounting screws included, no neutral line required, removable tabs on both side for multi-gang installation
• WIDE APPLICATION WITH BULBS - Fully compatible with 150 watts of dimmable LED and CFL lamps, 600W max watts of Incandescent and Halogen bulbs
• SAFE & RELIABLE - 1 Year Warranty, UL Listed for safety and performance ensured, contact our customer service team if you have any queries

Product features

TWO switch types for both single pole and 3 way applications

Connect the green or bare ground wire to ground wire

Connect the black wire to the hot input wire

Connect the untagged red wire to load wire

TWO switch types for both single pole and 3 way applications

Connect the green or bare ground wire to ground wire

Connect the black wire to the hot input wire

Connect the untagged red wire to load wire

Connect the tagged red wire to 3 way circuit wire

Fully Adjustable Dimming Range

The in wall dimmer switch offers a range from off to full brightness and every level between.

You can adjust your lamps to the desired level for acquiring preferred brightness, bright level for reading, working, studying while dim level for creating a perfect ambient atmosphere.

Smart & Smooth Control

Equipped with a large on/off rocker and smooth slider, you can control the dimming range of your lamps easily.

The on/off switch saves your recent setting without the need of adjusting it again when you turn it on.

Decorative Cover Plate Included

The dimmer switch comes with a simple and elegant wall plate, which blends in nicely with walls and surroundings, making it a great decorative solution for adding a minimalist feel to your home decor.

Product description

The Leviton toggle slide universal dimmer provides smooth, slide-action, full-range dimming for dimmable LEDs, dimmable CFLs, incandescent and halogen bulbs. For a traditional home, the classic style offers the ideal way to upgrade the functionality without compromising the character of the decor.

• Classic design with toggle switch and integrated linear full-range slide control for easy, precise operation
• Designed specifically for dimmable LED and CFL bulbs; Also compatible with incandescent and halogen bulbs
• Single pole or 3 way capable when used with a 3 way switch. No removal of fins required for multi-gang installations
• Built-in starting technology for CFL bulbs; Allows users to modify the dimming range to optimize low light level performance when required (optional)
• Wider dimming range for LED and CFL bulbs than traditional incandescent dimmers

User questions & answers

Question:	Will this dimmer stand 12 AR111 12Watts each
Answer:	Dimmer will control 300 watt dimmable LEDs if the AR111s you have are dimmable 120V 12Watt lights then switch should be OK as 12 lights would be ~144 Watts
Question:	We were trying to connect this switch, the light is on but the dimmer is not working, its a single pole, what am I missing
Answer:	You need to be using "dimmable" bulbs, either incandescent or LED, but not fluorescent. If you are using dimmable incandescent or LED bulbs, I believe there is a slider control (switch) somewhere on this switch to choose either incandescent or LED. That needs to match your bulb type.
Question:	I installed the switch as well as dimmable led bulbs. they work on the dim setting but they blink from half all the way to full power, any ideas
Answer:	I've had similar issues and took it up with Leviton on their website. They initially just asked me to send it back to them, but I stopped short stating that I didn't particularly want to "finance" that. So they did send me a replacement unit and a prepaid shipping label. The replacement one is "better", but sometimes it still goes into flicker or as I call it "spazz" mode. They have asked me for the exact bulbs I'm using (Ecosmart Classic Glass Bulbs from Home Depot) but nothing further from them. I use those same bulbs in (2) other fixtures with Lutron LED dimmers (Model# TGCL-153PH-WH and Model# CTCL-153PR-WH) and they both have worked flawlessly for about a year. Never a single flicker. Bob
Question:	Where is the locator light
Answer:	Mine has a green LED at the top of the toggle switch. It is almost impossible to see in the light, but when the room is dark, it is visible without being disturbing. It comes defaulted to OFF. There are two micro switches on the front of the switch, which are hidden once that switch plate is put on. The top switch has an A and B position. A (the default) is for LED and incandescent lights. B is for CFC bulbs. A second switch, lower down, is for the locator light. Set the switch to ON if you want to use the light. Set these switches before you put on the switch plate because the plate covers these switches.

Product features

Leviton TSL06-1LW Toggle Slide Universal Dimmer

Leviton’s TSL06 Toggle Slide universal dimmer is engineered to provide homeowners optimal control of 300-watt Dimmable LED and CFL bulbs, and 600-watt Incandescent and Halogen bulbs. This new dimmer offers the energy-saving benefits of dimming without sacrificing performance or the time-honored design valued in traditional homes. The Toggle Slide universal dimmer addresses performance issues–such as flickering, reduced dimming range, and low level start up–often experienced when incandescent-only dimmers are paired with dimmable LED or CFL bulbs.

Great Dimming, Traditional Style

The Toggle Slide universal dimmer features an on/off preset function which preserves the selected dimmer setting, smooth start-up, gentle-touch control, and fluid slide movement for precise dimming. The device’s traditional aesthetics offer the ideal way to upgrade functionality from standard switches without compromising the character of your traditional decor. Its slim, compact housing fits easily into a standard wall box and is suitable for multi-gang installations. The Toggle Slide universal dimmer is compatible with Leviton’s complete line of signature Decora wiring devices and wall plates.

Advanced Features

The Leviton Toggle Slide universal dimmer features a microprocessor control which offers the flexibility to fine-tune LED and CFL bulbs for best performance. A “kick-start” setting is available to ensure start-up of CFL bulbs. The dimmer also features a soft green LED locator light built into the switch, making it easy to find in a dark room.

About Leviton Dimmers

Leviton is a leading manufacturer of dimmers designed for both the energy-saving benefits of dimming and the ambiance that can be created in any room of the home by controlling lighting levels. To ensure superior performance, Leviton works with bulb manufacturers to develop dimmers that are tested and proven effective to function in harmony with the latest bulb innovations. Leviton dimmers come in a wide range of models including digital, wireless, preset, slide, rotary, toggle, and touch and provide precise dependable control.

Product description

Lumen, 150W, white, dimmer switch, LED/compact fluorescent light or 600W incandescent/Halon, single pole or 3 way preset dimmer, larger rocker switch turns lights on/off, slide up to brighten, down to dim, certified to dim the broadest ran of LED bulbs, can dim mixed load of light sources, crisp clean lines with classic aesthetic, longer slide for maximum dimming ran, clamshell. LECL-153P-WH-3

• LED/compact fluorescent light or 600 W incandescent/halon, single pole or 3 way preset dimmer, larger rocker switch turns lights on/off
• Slide up to brighten, down to dim, certified to dim the broadest ran of LED bulbs
• Can dim mixed load of light sources, crisp clean lines with classic aesthetic, longer slide for maximum dimming ran, clamshell

User questions & answers

Question:	The tabs on the right and left side of each switch do not allow enough space to fit into a three switch wall plate. How is this accomplished
Answer:	Bend the tabs back forth until they separate from the switch this allows the switches to fit in a 2 or 3 gang box leave the tabs on each switch that’s located on the both ends of box.
Question:	where is this product manufactured
Answer:	The ones I received were made in China.
Question:	What is the difference between this and the Skylark? Are they there same range
Answer:	They work well, don't know about Skylark, mine work well with dimmable LEDs and don't flicker at low setting.

Product description

Leviton offers a full line of dimmers and lighting controls that bring Energy Smart Living to your Home. These devices easily replace standard wall switches throughout the house and provide an immediate energy payback. Create the perfect mood in any room and save energy by installing dimmers today. Leviton Tabletop Slide Control Lamp Dimmer 300-watt incandescent, 150-watt dimmable LED and CFL bulbs. Black TBL03-10W features: Full range feed through lamp cord dimmer provides convenient tabletop dimming control with easy glide, positive on/off action in Completely insulated housing. Testing and Code Compliance: UL Listed, CSA Certified, and backed by a limited 5-year warranty. Environmental: Flammability UL94 V2 Rating. Operating Temperature: 32 to 130 Degrees F.

• Full range slide control dimmer
• Compatible with incandescent, halogen, dimmable LED and dimmable CFL bulbs
• No installation required
• 6 foot cord makes it easy to reach any outlet
• AC UL listed. Frequency-60 hertz
• Note: "Application guide" under the technical specifications shows our official bulb compatibility list. The customer can use this to find a bulb that will work with this device.

User questions & answers

Question:	does this also have on/off switch
Answer:	Yes, this is also an on/off switch, slide it all the way up to full bright and slide it all the way down to turn off the light
Question:	This I don't have to slice do i? Jus plug in and use? No spicing or anything
Answer:	Very simple device. You plug it in then you plug a lamp or something like that into it's plugin. Then you can control your lamp. It's really quite simple.
Question:	From the reviews, it sounds like this dimmer doesn't have the "buzz" that some do with LED bulbs. Anyone know if it is as quiet with an incandescent bulb
Answer:	It creates a noticeable 120Hz buzz when used with Sylvania 25W Dimmable "Night Chaser" lamps: https://www.amazon.com/gp/product/B07DPDVHMM . It is completely silent when used with CRLight 12W Dimmable "Antique ST64" lamps: https://www.amazon.com/gp/product/B07F322C39 but has almost a 1-second lag.
Question:	How dim will it go
Answer:	We tried to use this to dim to a night light. It was not that dim for LED. The infosheet for a similar product from LUTRON says 300 W should not be used for LED (http://pdf.lowes.com/operatingguides/027557390811_oper.pdf). I suggest this item on Amazon: part number: TTCL-100H-BL; ASIN: B004DZONXI; link: https://smile.amazon.com/Lutron-Credenza-dimmable-Incandescent-TTCL-100H-BL/dp/B004DZONXI/

Product features

Leviton TBL03-10E Tabletop Slide Control Lamp Dimmer

Leviton offers many products that will help lower electrical costs and add convenience to everyday living. Dimmers reduce energy consumption and extend bulb life. Leviton's table top dimmer is an easy way to add the ambiance of dimming to a table or floor lamp, Just plug in lamp and start dimming.

Our Mission

We pledge to provide products and services that go beyond our customers’ expectations—always—by carefully listening to our customers and understanding how they live and work, so we can apply our ingenuity to their real needs.

Our Vision:

We’re working to create a family of companies that protect, connect, and power the world’s most innovative environments every day by pursuing opportunities in new markets, optimizing profitability, and accelerating the growth areas that enable us to deliver best-in-class solutions.

Our Values:

We’re committed to promoting an open, honest and trustworthy culture, where each employee is respectful of our customers, vendors and one another. Driven by the needs of our customers and by industry standards, we strive for continuous improvement in all we do as we elevate the quality of our products, services and system solutions.