11 best timer switch for heater

Product description

Teklectric Home & Kitchen

• ⏱️ SIMPLE TO USE - Push one button illuminated LED timer switch between OFF setting and 5/10/15/30 minutes or 1/2/4 hours. A totally quiet operation that automatically turns off when time expires.
• ✔️ EASY INSTALLATION - PLEASE CHECK WIRING BEFORE PURCHASING! A quick and simple do-it-yourself project. Replaces existing ordinary single wall switch or multiple gang boxes.
• 🏠 AUTOMATE YOUR HOME - Works with your exhaust fan, heater, jacuzzi and more. Ideal for kitchen, bath, garage or use as a porch light timer.
• ⚡ HEAVY DUTY TIMER - 125V AC / 60Hz 15A ½ HP capacity allows you to use it with high wattage items in your house. The timer is installed with a ground wire for better protection.
• 💲 SAVE MONEY - Reduces costs on energy usage for electrical and lights in and around the home .

User questions & answers

Question:	Are the leads copper or alum? Important as can not connect alum to copper wire by code
Answer:	The speaker cable in this kit is exactly 100 FT and in one continuous piece so you can cut to length needed on each speaker run. The system CAN support longer runs, not a problem when using the 70V audio line as recommended in the instructions. You could actually go out hundreds of feet with that signal. By the way, we now only bundle BLACK speakers in this kit, we found that the white speakers tend to get yellow looking over time and just not happy with that. We do need to change our picture in this advertisement.
Question:	Does it require a natural wire
Answer:	Yes, we send a audio patch cable that plugs into the headphones jack on your phone.
Question:	Can you override the timer? I am hoping not, I don't want someone to turn on the switch and leave it on without it counting down
Answer:	I use this system for gymkhana in a large outdoor arena. The 2 speakers that came with the system seem to do the job of letting everyone hear even at the farthest parking lot at the arena.
Question:	Does it remember the last timer setting or do you have to press multiple times every time you want to turn it on
Answer:	Yes, the amplifier has RCA inputs that can connect from your TV directly to the amp. Or if you have your TV running through a stereo receiver you can run RCA cables from it to the amplifier.

Product description

GE Push Button In-Wall Digital Countdown Timer Switch - NO Neutral Wire Required

• Replace your wall switch or spring-wound timer with this quiet push button digital timer - great for use with lights, exhaust fans, and heaters.
• Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour.
• On/Off push button also allows you to turn the wired device ON or OFF without an end time.
• Compatible with incandescent, CFL and LED bulbs
• Blue LED indicator lights show last used preset (blinks every 20 seconds).
• LED lights will stay on when wired device is ON without an end time.
• Includes a single decor wall plate and fits most single or multi-gang rocker plates.
• Easy direct wire installation; DOES NOT require a neutral wire (Ground wire IS REQUIRED).
• Electrical Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, ¼ HP

• Replace your wall switch or spring-wound timer with this quiet push button digital countdown timer. Timer is great for use with lights, exhaust fans, and heaters. Compatible with incandescent, CFL and LED bulbs
• Choose from the following preset countdowns: 5 min, 15 min, 30 min, 1 hour, 2 hour, or 4 hour. On/Off push button also allows you to turn the wired device ON or OFF without an end time
• Blue LED indicator lights show last used preset (blinks every 20 seconds). LED lights will stay on when wired device is ON without an end time
• Includes a single decor wall plate and fits most single or multi-gang rocker plates
• Easy direct wire installation; DOES NOT require a neutral wire (Ground wire IS REQUIRED). Ratings – 125VAC 60 Hz: 6.4A Resistive, 800W Tungsten, 800VA Ballast, 1/4 HP

User questions & answers

Question:	I want to control a gas fire place in a rental condo. I like the max 4 hr setting but I dont like the on/off overide That defeats the timer control
Answer:	Yes
Question:	Can this timer be use for a bathroom heater
Answer:	I’m always able to make returns when I purchase anything on amazon. If you’re return date has closed try calling them and explain the situation, they’re always helpful.
Question:	How does the manual over ride work if I want the timer to not be used? Can it be set as the default
Answer:	There is a top to this soda can organizer and you can easily stack two rows of cans and the top fits nicely. However, I find the top to loose fitting to place another on top. I do use the top to place light or small items, like yogurts, some leftovers that have been placed in ziplocs. Nothing heavy.
Question:	What is the vampire load of this unit when in standby mode? Supposedly it has to "charge up" - does it do that all the time? What's the trickle load
Answer:	I haven't tried putting it in the dishwasher. I wouldn't buy this organizer again, in fact I'm thinking looking for a replacement. The cover WILL NOT stay on it! I may try to install some hardware to keep it on but, it is absolutely no good if you expect a cover on it.

Product features

Easy Direct Wire Installation

The in-wall countdown timer has an easy direct wire installation, making it easy for you to replace your wall switch.

Fits Single/Multi-Gang Rocker Plates

This countdown timer includes a single decor wall plate and fits most single or multi-gang rocker plates.

6 Countdown Presets

With 6 countdown preset options, you can choose from 5 min. up to 4 hours to shut off device at desired time.

No Neutral Wire Needed

No neutral wire is need to install, but a ground wire is required.

In-Wall Countdown Versatility and Uses

Turn lights ON/OFF with this countdown timer to help keep your home secure. By automating your lights, this timer gives your home a lived-in appearance even when you are away.

Compatible with LED, CFL and incandescent bulbs, the timer supports a wide range of plug-in lighting.

The timer’s versatility is not limited to lights. It can also be used for ceiling fans, exhaust fans, heaters and more. The timer is rated for 125VAC/60Hz and UL certified.

Easy Installation

1. Shut off power to fuse box or circuit breaker before installation.
2. Remove wall plate and existing single pole switch, if applicable.
3. Strip building wire to 3/8”.
4. Connect wires using the provided twist-on connectors.
5. Tuck the wires into the box leaving enough room for the timer then mount using screws provided and screw wall plate into place.
6. Restore power at fuse box or circuit breaker.

Operation

For timed switching, simply press the 5, 15, 30 min., or the 1, 2, 4 hour pad on the face of the timer.

To turn lights on with no end time push and hold big button for 3 seconds. Lights will stay on until big button is pressed to turn off lights.

• Automatically turns a load OFF on a countdown timer; saves energy by ensuring the light or fan is never left ON by mistake
• Six countdown timer options to choose from: 5 min, 10 min, 30 min, 60 min, 2 hour, and 4 hour; manual ON/OFF button overrides the timer
• Blue LED indicators feature two modes; mode 1: LED flashes twice indicating setting success then stays OFF; mode 2: LED stays ON during the selected time delay then shuts OFF
• Perfect for lights, ceiling fans, bathroom fans, heaters, and any other appliances that are commonly forgotten
• 2 pack; NEUTRAL NOT REQUIRED, ground wire required; 120VAC 60Hz, incandescent/halogen: 800W, LED/CFL: 150W, motor: 1/4Hp; operating temperature 32°F to 131°F; UL 94 V2 flammability rating; UL listed; 1-year warranty

User questions & answers

Question:	Are the wires copper or aluminum
Answer:	Can you retype the question, if your meaning MW milliwatt that's not how you even look for these portable Headphone Amps... You want most dynamic range audio with less distortion... I can tell you that I don't recommend this Model as most have an issue with the Batterys not charging in them with a certain firmware... It's taken me 4 weeks to get the factory to send me replacement Batteries that I still have to replace myself...
Question:	there is a clicking noise whenever it is on. Is it suppose to be like that
Answer:	As I understand it (ahem, ahem), by plugging into the USB port the unit completely bypasses the sound card (which is on a different system bus). I do know that it completely bypasses your computer sound controls and you must use the controls on the FIIO, and that's what you'd expect if the card was bypassed. Can't say I'm sure that the computer hardware won't balk if there's no working sound card, even if it's not being used, but seems unlikely that'll cause a problem.
Question:	How do i determine whether this timer switch can work with my panasonic paf-fv-08vq3 bathroom fan
Answer:	Yea it'll work with any computer. And I use it for my iPad with the USB camera adapter
Question:	Can this be used for whole house fan
Answer:	We recommend leaving the system running with the 2 speakers, this system is very well designed for this setup. We offer other kits and selections at our website electronicsworldwide.net

Product features

ENERLITES HET06-J-W Countdown Timer Switch

The ENERLITES HET06-J countdown timer automates lights or fans to instantly upgrade any home. With a simple installation, this timer wall switch can control any light, fan, or heater with 6 preset timer buttons. The design is straightforward and easy to use for family members of all ages, and a manual ON/OFF button can be used to override timer settings. This wall timer switch conserves energy and promotes safety by ensuring loads are never left on by mistake.

Six Preset Timers

This timer light switch is easy to use with 6 preset timer buttons. Choose your time delay with each and every use. Options include 5 minutes, 10 minutes, 30 minutes, 60 minutes, 2 hours, or 4 hours. Any load connected to the timer switch will shut OFF when the time expires.

LED Indicators

Each of the buttons on the timer switch has a blue LED indicator that may turn ON when in use. In Mode 1, the LED will flash twice to indicate success, and then shut OFF during the selected time delay. In Mode 2, the LED indicator remained ON during the selected time delay, and shut OFF when time expires.

Convenience

With a countdown timer switch, you can turn on the light or fan and literally forget about it! Watch as your electricity bills go down and your light bulbs last longer; the switch timer conserves energy by turning the light or fan off so that you don’t have to. Never leave an appliance on by mistake again!

Home Comfort

The timer wall switch is simple to install and compatible with most lights and ventilation fans. Make your life a little easier by installing a countdown timer in the bathroom, closet, pantry, garage, or laundry room. Lights or fans will shut off automatically so that you never forget them.

Product description

Dial in device automation with a Honeywell In-Wall Spring-Wound Timer. The easy-to-use timer is perfect for lights, exhaust fans, heaters and pumps. For additional versatility, it is compatible with LED, CFL and incandescent lighting. Simply turn the dial to provide power to your electrical devices for up to 60 minutes. The single-pole timer is easy to install and does not require a neutral wire. It includes white and light almond faceplates and fits single- or multi-gang standard and rocker plates to match your existing switches. Count down the minutes with the Honeywell In-Wall Spring-Wound Timer.

• 60-Minute Countdown – The dial operation makes setting the countdown easy and fast; turn the dial to provide power for up to 60 minutes
• Ideal Use – The in-wall timer is perfect for lights, exhaust fans, heaters, pumps and is compatible with LED, CFL and incandescent lighting
• Face Plates - Includes white and light almond face plates to match existing switches and fits single- or multi-gang standard and rocker plates to integrate with your home
• Easy to Install – The single-pole timer and no neutral wire required simplifies installation, saving you time and energy
• Electrical Ratings – 125VAC, 50/60 Hz 20A general/resistive, 7A tungsten, 1HP motor, 250VAC, 50/60 Hz 10A general/resistive, 2HP motor, 277VAC, 50/60 Hz, 10A general/resistive

User questions & answers

Question:	Anyone have an issue with this not turning the fan off? Dial just keeps going past
Answer:	I ordered two of them, and neither one would turn off or count down by itself, the dial just stayed wherever I turned it to. I returned them, and got electronic timers instead. The mechanical spring/countdown mechanism on these junky things is absurdly fragile.
Question:	Spring powers dry contact 10amp rated switch closed for selected time. no neutral means no v drop so no power used. why wouldn't it work for 12vdc
Answer:	Hello ART005, thank you for your question. The dry contact was not designed or evaluated for use in DC circuits or not evaluated for use in 12V DC circuits. The device should only be used within the published ratings.
Question:	Can i make this normally closed and have the circut open when wound
Answer:	That is exactly how it works. Closed always, wind the switch and it is on for up to an hour, bsed on how far you wind the switch.
Question:	Can you use this on 12V DC
Answer:	No, it is rated @ 125v AC. 12V DC will probably not run the winding circuit. But for only $9, give it a try.

Product description

GE 60-Minute Countdown Timer, In-Wall Mechanical Switch, Spring Wound, Up to 60 Min, Auto Shut Off, No Neutral Wire Needed, Ideal for Lights, Exhaust Fans, and Heaters, 20A Heavy Duty, 15305

From the Manufacturer

This indoor in-wall auto shut-off spring wound timer is easy to install and easy to use. Just turn the dial to stay on up to 60 minutes. Fits any standard size wall plate. Use with lights, exhaust fans, heaters and pumps. Counts down to shut off at the desired time.

• Spring-wound timer counts down to shut off at desired time. Up to 60-minute countdown at 1-minute intervals.
• Ideal for use with lights, exhaust fans, heaters, pumps and other appliances.
• Easy to install – NO NEUTRAL WIRE needed. Directly wire this timer into a standard light switch (standard toggle or decorator plate)
• Includes metal wall plate. Incandescent, CFL and LED compatible.
• Electrical Ratings: 125VAC, 50/60 Hz: 20 A Res. /Gen. , 6 A Tungsten, 1 HP. 250VAC, 50/60 Hz: 10A Res. /Gen. , 2 HP. 277VAC, 50/60 Hz: 10 A Res. /Gen.

User questions & answers

Question:	Does it make a ding nose when the time is up
Answer:	Hi Zed, thank you for your question. No, the time does not make any sound notification when the timer expires. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	how long is the return window/warranty for this
Answer:	Hi Brian, thank you for your question. This timer comes with a 1-year limited manufacturer warranty from the original date of purchase. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Can you set it to stay on
Answer:	No, there is no override switch to set it to stay on.
Question:	Is this timer have a safety certification on it
Answer:	don't know my electrician installed it for me. I believe he would not without such a safety certification.

Product features

Lighting Compatibility

This spring-wound timer is compatible with LED, CFL and incandescent bulbs.

Auto Shut-Off

Timer automatically shuts off after countdown is complete - saving you time.

60-Minute Countdown

Dial counts down to shut off after desired time - up to 60 minute countdown at 1-minute intervals.

Electrical Ratings

Total Ratings:

125VAC, 50/60Hz, 20A Res./Gen., 7A tungsten, 1 HP

250VAC, 50/60Hz, 10A Res./Gen. 2 HP

277VAC, 50/60Hz, 10A Res./Gen.

Replace Switch

Fits any standard size wallplate: toggle style, decora style, single pole and multi-gang.

Direct Wire

Directly wire this timer into a standard light switch for easy installation.

Ideal Use

The easy-to-use spring-wound timer is perfect for exhaust fans, heaters, pumps and lights.

Product description

Featuring a streamlined, contemporary design, the Leviton LTB30 Decora Preset 30-Minute Countdown Timer offers advanced features and superior accuracy. It provides convenient timed control of lighting and motor loads in homes, offices, schools, libraries, and more. It's ideal for automating heat lamps, hot tubs, attic fans, and bathroom exhaust fans.

Automatic Control of Lighting and Motor Loads

With four preset buttons and one OFF button, the Leviton LTB30 Timer is easy to use. Simply press the button for the amount of time you want a light or motor load to remain on--the device will automatically turn off when the time period has expired. Press and hold the top button to initiate override or press and hold two buttons to convert the preset 30-minute timer into another time interval.

Complete with green LED locator lights, this timer offers single-pole or three-way capability with a VP0SR Vizia + Switch Remote (sold separately). The LTB30 Timer also includes three colors options in the box--white, ivory, and light almond--to coordinate with any decor.

Lowers Energy Bill and Helps the EnvironmentEven with the best of intentions, it's often easy to forget to turn off a light or fan before leaving a room, which wastes energy and increases utility costs. By replacing a standard light switch (where a neutral wire is present) with the LTB30 Timer, you can reduce overall power usage, lower energy bills, and help improve the environment.

Easy Installation and Operation

The LTB30 Timer meets UL, CSA, and FCC requirements, and it can replace a standard wall switch where a neutral wire is present and is gangable with other devices. For added convenience, the LTB30 can be used in a single-pole installation or in a three-way installation with a VP0SR Vizia + Switch Remote (sold separately).

The Leviton LTB30 Decora Preset 30-Minute Countdown Timer is backed by a five-year limited warranty.

What's in the Box

Leviton LTB30 Decora Preset 30-Minute Countdown Timer with 5-, 10-, 15-, and 30-minute time intervals and off button, three faceplates (white, ivory, and light almond), and instruction sheet.

From the Manufacturer

Leviton offers many products that will help lower electrical costs and add convenience to everyday living. By simply replacing standard switches with timer switches will reduces energy consumption and extends bulb life. Better than ever - Leviton Decora (R) Timer Switches offer advanced features, superior accuracy and contemporary aesthetics. Our robust selection provides convenient timed control of lighting and motor loads in homes, offices, schools, hotel rooms and other small commercial applications. Homeowners can set lights to turn on and off for a lived-in look while they are away, or automate control of heat lamps, pool pumps or bathroom fans. Our versatile selection includes fully programmable and preset timers in popular styles and colors. All are backed by Leviton's long history of quality and reliability. Decora LTB30-1LZ, 1800W Incandescent/20A Resistive-Inductive 1HP Preset 5/10/15/30 Minute Countdown Timer Switch, White/Ivory/Light Almond. Decora is a registered trademark of Leviton Mfg. Co.

• 4 Presets: 5-10-15-30 minutes
• Simple press and hold override timer function
• Can be used for lighting, heat lamps, hot tubs, attic and exhaust fans
• Installation instructions included and 3 way only Works with Vizia + Remote VP0SR (sold separately)
• White assembled on device, ivory and light almond included (colors may vary)
• 120 VAC, 60 Hertz, 1800 Watts Incandescent, 600 Watts CFL, 5A LED, 20A resistive/inductive, 1HP, single pole 3 way or more locations, neutral required

User questions & answers

Question:	Can this timer be used to control a bathroom with the fan/light combo? I.e., Fan & light fixture come on when you turn on the switch. Light has 2 - 60W bulbs and fan is standard bathroom fan
Answer:	No a lighted switch......try this http://www.westsidewholesale.com/leviton-5613-2a.html?mr:referralID=41e0c9da-77f2-11e3-9104-001b2166c62d
Question:	I want a white one. Amazon does not have any way of stipulating the specific color
Answer:	Electrician needs to make a living
Question:	can this timer be used for 120v in wall broan electric heater
Answer:	I would consult an electrician on this , but its just a switch. I dont the think the type of wire should matter . That is just my opinion . i would check with an pro just to be safe >
Question:	Will this work with a fan with only a 13W load
Answer:	This one is considered "self-grounding" and has that in the description. If you have a ground wire, I would look at one of the other Leviton switches. I bought this as a replacement for an existing Leviton switch.

Product features

Leviton Decora Timer Switch

The Leviton Decora Timer Switch offers advanced features, superior accuracy and contemporary aesthetics. It provides convenient timed control of lighting and motor loads in homes, offices, schools, libraries and other small commercial applications. It is ideal in automating control of heat lamps, hot tubs, attic and exhaust fans.This timer allows users to simply press and hold the top button to initiate override or press and hold two buttons to convert the 30-minute timer into other available time intervals. It has soothing green LED locator lights and offers three colors in one box, plus single pole or 3-way capability (with VP0SR).

Features

• Easy operation with four preset buttons and one OFF button
• Simple press and hold override function
• Soothing green LEDs
• Neutral wire required for installation

Product description

60-30-20-10 Minute Preset Wall Switch Timer, White, 30-Minute. Automatic shut-off bathroom timer. Works with compact fluorescent bulbs. Push one button to set timer to 10-20-30-60 minutes. Works with lamp timer, fan timer, and other appliances easily. Install behind standard decorator or switch style wall plates. Bathroom countdown fan timer switch

• ⏱️ SIMPLE TO USE - Push one button to set timer, programmable for 60-30-20-10 Minute . A totally quiet mechanical operation that automatically shuts off when time expires.
• ✔️ EASY INSTALLATION - A quick and simple do-it-yourself project. Replaces existing ordinary wall switch or behind standard decorator plates. Neutral wire required and not compatible for 3-wire switches.
• 🏠 AUTOMATE YOUR HOME - Works with your exhaust fan, heater, jacuzzi and more. Ideal for kitchen, bathroom, garage.
• 💲 SAVE MONEY - Reduces costs on energy usage for electronic appliances in and around the home .
• 💡 COMPATIBLE - UL tested. Works easily with compact fluorescent bulbs, lamps, and other lighting appliances.

User questions & answers

Question:	Can I use it to control Bathroom lights
Answer:	Yes, can connect ether lights or fan or both at same time is fan and light switch are in same electrical box.
Question:	what kind of timer for a bathroom fan only 115V with 2-wire
Answer:	My bath fan switch is similar to this but required a ground wire. Also the time sequence was different. It went 5,10,15, and 30. Please note some timers require a ground and some dont. The timer you show should work in your 115vac fan circuit. Hope this helps..... Phillip
Question:	Are the contacts spdt or spst? thanks
Answer:	Not sure, but believe spst. It only switches the Hot side on or off. The connection instructions will, I believe, confirm this.
Question:	How many watts or amps is this rated for
Answer:	The third picture above shows 15 Amps

Product description

Description

Switch Type:Touch On/Off Switch

Voltage: 100-240V

Maximum power: 3000w

Electric current:16A

Certification:SAA

Wiring:Live Line and Null Line

WiFi Standard:2.4GHz

Standby consumption:no more than 0.5w

Work Life:100,000 times for operation

Warranty:2 years

• - Google Home and Echo Alexa Voice Control, IFTTT
• - Timer and Schedule Function, you can turn on or turn off the water heater automatically
• - APP Control, turn on your water heater in advance, enjoy a hot shower when arrived（Free APP Name: Smart Life/Tuya ）
• - Feedback Function, you can monitor the status of the water heater anywhere
• - Reliable and Durable, Max Load: 3000W

User questions & answers

Question:	is this UL listed
Answer:	China where else?
Question:	Does the switch work with Nest mobile app
Answer:	Not sure why it wouldn't work with the new iOS, it's a standard usb audio device no special software needed. The plug is mini USB (not micro) so you need a plug that will go from the Apple connector to mini USB.

Product description

Schedule your day with the GE-branded 24-Hour Mechanical Box Timer Switch. The heavy-duty box timer is perfect for fans, pumps, pool heaters, AC units, heating and ventilation systems, and more. For additional durability and security for outdoor use, the weatherproof metal case is lockable, tamper resistant and NEMA 3-R Rated. Manual 30-minute interval pushpins allow several ON/OFF settings per day to control single-pole single-throw and double-pole single-throw switches. To activate, simply push the periods of time down from the edge of the dial and rotate the times’ dial to current time of day for a 24-Hour cycle. Convenient and secure block terminals support fast, easy wiring, and selectable voltage – 120V, 240V or 277V – provides power to accommodate a variety of equipment. Manage your home’s large appliances with the GE-branded 24-Hour Mechanical Time Switch.

• Heavy-Duty Mechanical Timer – The rain and rust-proof metal constructions is designed to withstand any weather forecast and is lockable, tamper resistant and NEMA 3R-Rated
• Universal Voltage – Auto-sensing 120 VAC, 240 VAC and 277 VAX compatibility adapts to required power to support a variety of equipment
• 24-Hour Cycle – The 30-minute interval pushpins accommodate several daily settings, allowing you to personalize multiple daily settings
• Variety and Convenience – This timer is compatible with single-pole single-throw and double-pole single-throw switches, block terminals hold wires securely and has ½” and ¾” knockouts for easy wiring
• Ideal Use – Perfect for pool pumps, water heaters, outdoor lights, fans, AC units and other heavy-duty appliances; this indoor/outdoor box timer is cUL Listed and recommended for certified electrician installation

User questions & answers

Question:	in a power outage will the backup battery still provide power to the unit it is connected to? ie. lights
Answer:	Hello Happy Boulderite, thank you for your question. No, the backup battery is only for storing your programmed times and internal clock. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	Does anyone have a wiring diagram showing how to wire 2 outlets? 1 240v and 1 120v. I have one line to go into it 3 wire plus ground
Answer:	Has a diagram that comes with it. Just remember there are 2 load lines and not just one. The diagram can be a little decieving.
Question:	The timer does not work
Answer:	That is really vague......is the clock on?..Did you set the timer? The wiring instructions on this model are so vague they are confusing and it really looks like they are directing to create a short. I had one of these and was replacing but had I used their instructions it would not have worked. Look up the wiring diagram on the web.
Question:	Can the timer be removed from the box to be mounted in a larger box with the breakers
Answer:	No , It sits in a special groove ,you could mount next to main box and run wires that way.

Product features

Programmable Daily Cycle

Schedule ON/OFF times with easy-set trippers to operate either single-pole single-throw and double-pole single-throw switches.

Heavy-Duty Metal Construction

Heavy-duty, rain-tight, rust-proof metal construction designed to withstand the elements.

30 Minute Intervals

Manual 30-minute interval push pins allow several personalized ON/OFF settings per day.

Tamper Resistant

The metal box timer is lockable to resist tampering and convenient screw terminals hold wires securely.

Pre-installation

Before installation, follow the instructions to remove knockouts to route wiring to connection terminals. Knockouts may be made 1/2 in. or 3/4 in.

Place small blade screwdriver into inner ring of knockout circle. Tap down lightly with the screwdriver in order to punch the 1/2 in. knockout loose.

For 3/4 in. knockout, create 1/2 in. first, then grip outer ring of knockout circle with pliers. Gently twist and pull to remove outer ring and form 3/4 in. knockout.

Product description

This 24-Hour Indoor Heavy Duty Mechanical Water Heater Time Switch is ideal for use with fans, pumps, water heaters, AC, and more! Its heavy-duty, metal construction and lockable, tamper-resistant metal case make this timer durable. The Time Switch is easy to install with its 3/4 "" knockouts. Easy to set, and it includes a manual override switch.



*Recommended Installation by licensed electrician*



Technical Specifications



•SWITCH: DPST •CONTACT RATINGS: •120-277 V ac, 40 A Resistive, Single Phase •120-277 V ac, 40 A General Purpose, Single Phase •120-277 V ac, 20 A Ballast (Inductive) •120 V ac, 40 A Tungsten •120 V ac, 2HP •240 V ac, 5HP • TIMING MOTOR: 208-277 VAC 60Hz • POWER CONSUMPTION: 3 Watts MAX

• Ideal Use - Ideal for water heaters, fans, pumps, air conditioning, blowers, lighting, heating, ventilation systems and other heavy-duty applications
• Ratings - 240 VAC (208-277 VAC) for up to 5 HP Applications – cUL Listed
• Metal Enclosure - Heavy-duty metal enclosure is lockable, tamper resistant and NEMA 1-Rated
• Installation - Double-pole, single-throw design – ½ inch and ¾ inch knockouts – Recommended installation by a licensed electrician.
• Water Heater - For indoor use - only in the United States, Canada and Mexico
• 120 VAC. For use only in the United States, Canada, and Mexico

User questions & answers

Question:	Timer is not keeping correct time of day
Answer:	Is it possible you do not have it setup with correct voltage?
Question:	Does this timer utitlize the same electrical box as the 15136 timer that I alread have hard mounted such that I could snap in the innards this timer
Answer:	Hi Robert, thank you for your question. Yes, it does. If you have any further questions, please don't hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	How many pins it comes with
Answer:	Just Two
Question:	How do I know if this will work for my water heater
Answer:	Hello Peter K, thank you for your question. This item is Ideal for water heaters, fans, pumps, air conditioning, blowers, lighting, heating, ventilation systems and other heavy-duty applications. As long as your water heater doesn't exceed these electrical ratings - 240 VAC (208-277 VAC) for up to 5 HP Applications

Product features

Programmable Daily Cycle

Schedule ON/OFF times with easy-set trippers to operate double-pole single throw switches.

Heavy-Duty Metal Construction

Heavy-duty, rain-tight, rust-proof metal construction designed to withstand the elements.

Manual Override Switch

One pair of ON/OFF trippers is included for manual control and override.

Tamper-Resistant

The metal box timer is lockable to resist tampering and convenient screw terminals hold wires securely.

Knockouts

Each metal box comes with 1/2" and 3/4" knockouts. Follow the pictures to remove knockouts.

For 1/2" knockout place small blade screw driver as pictured. Tap lightly to punch knockout loose.

For 3/4" knockout first use screwdriver to punchout 1/2" knockout then use pliers to remove outer ring.

Product description

Power supply: 240VAC. Current: 40A Inductive 50A Resistive Wireless Standard: Wi-Fi 2.4GHz b/g/n Security Mechanism: WEP/WPA-PSK/WPA2-PSK Operating Temp: -20degree~70degree Connector: Universal Functions: Remote ON/OFF: Turn electrical devices on/off from anywhere App Support: Free IOS and Android mobile App eWelink Sync Status: Real time device status provided to App Timing: Set scheduled/countdown timers to turn on/off at specified time Share Control: Control your smart home together with your family Scene: Turn on/off a gang of devices one tap Smart Scene: Trigger on/off by temperature, humidity or other environmental conditions Network Support: Control electrical devices over Wi-Fi or 2/3/4G mobile network Voice Control: Works perfectly with Amazon Alexa: MANUAL OVERRIDE SWITCH INCLUDED... 120VAC version is available (https://www.amazon.com/dp/B07THD8VBN?ref=myi_title_dp)

• HIGH POWER LOAD- Max 40 Amp 240VAC 10HP load, for outdoor/indoor heavy duty applications like pumps, heaters, fountains etc... (NOTE: 120VAC is available if needed at https://www.amazon.com/dp/B07THD8VBN?ref=myi_title_dp)
• REMOTE and VOICE CONTROL-Works with Amazon Echo,Echo Dot and Amazon Tap to manage your devices through Voice control.Users can control the device with voice commands. MANUAL OVERRIDE SWITCH INCLUDED
• OUTDOOR RATED- 8"t x 6"w x 4"d waterproof enclosure design,prevent rainwater from flowing into the junction box along the aperture, free yourself from the hassle of going outside to turn off or store devices in bad weather
• EASY TO INSTALL & SETUP - for the tech loving men or women in your life- Wi-Fi enabled to use your existing wireless router with no setup, or monthly charges, illustrated instruction help you to install and set it easily, and then you could share it with family members
• WARM AFTER-SALES SERVICE- One year warranty provided,if you face any technical issue, please feel free to contact us to get professional help.

User questions & answers

Question:	Can you program it to run a specific schedule
Answer:	S/S Stock Pot 24 Qt w/ Cover, 13 3/8" x 10 1/4" (Dia x Depth)If you looked at the other questions, you would have seen references to the mfg website. Dimensions for all pot sizes can be found at http://www.wincous.com/ProductShow.asp?ID=72. Additional product info is at http://www.wincodwl.com/PDF/procook.pdf.
Question:	How can I have it turn on or off automatically with temperature changes
Answer:	Yes, Winco identifies it as NSF-certified induction-ready on page 36 of their Professional Cookware cataloghttp://www.wincous.com/PDF/procook.pdfThe tri-ply heavy duty bottom is what makes it work with an induction cooktop.
Question:	Will this support a pool pump and pool heater
Answer:	I couldn't find a straight answer, so I tried the 16qt pot. I can definitively say that the 16qt pot DOES have rivets inside the pot.
Question:	can one unit control multiple devices at different times
Answer:	The base is heavier than the sides...it's all stainless steel; the bottom appears to be more than one-ply, but how many, I don't know' I think it is a great buy for the money