13 best timer for light bulb

Product description

This simple LED bulb keeps a schedule so you don't have to. With a built in timer that repeats every 24 hours, feel secure knowing it will turn on and off at the same time so you always have light when you need it.

• EASILY SET A SCHEDULE FOR YOUR LED LIGHT BULB: This simple timer LED bulb keeps a schedule so you don't have to. With a built in timer that repeats every 24 hours, feel secure knowing your LED light bulbs will turn on and off at the same time. These LED lights will always provide light when you need it.
• VERSATILE TIMER LIGHT BULB: This LED light will automatically turn on/off at the same time each day. Set these LED light bulbs for 2, 4, or 8 hours of ON time, or choose to use it as a standard light bulb.
• MONEY SAVING LED LIGHT BULBS: This LED light saves $87 in energy cost vs. an incandescent 60-Watt light bulb over the light bulb's life.
• ENERGY SAVING LED BULBS: This GE A19 LED bulb is a replacement for 60-Watt light bulbs while using only 8 Watts of energy. Reduce your energy consumption by using this GE LED light.
• LONG LASTING LED BULBS: These LED light bulbs provide long lasting, energy efficient LED light. You can use these LED bulbs for 13 years based on 3 hours per day of use.

User questions & answers

Question:	Can it be used with pull chain fixtures
Answer:	Yes, as long as the pull chain fixture is a standard on/off.

Product features

Step 1

Choose preferred time-setting or standard use with built in switch

Step 2

Insert the bulb into fixture

Step 3

Turn on the fixture at the desired time to set when the bulb will come on each day

NOTE: To reset the schedule, turn the power off, then on at new desired time

Step 4

If desired, place the included reminder sticker on power switch to ensure the bulb has power and stays on schedule

Product description

Programmable off timer from 2, 5 or 8 hours, plus dusk to dawn settings. Random off timer deters intruders. Contact plunger enables optimization of detection window. Works with incandescent, compact fluorescent and LED bulbs. Digital microprocessor for full brightness and no flicker operation.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed. Photoelectric light controls sense light levels and automatically turn lights on at dusk and off at dawn. They end coming home to a dark house, simulate home occupancy to deter intruders and require no seasonal adjustments as with timers. Plus, since lights are on when needed, light controls save money and energy too. Do not use with opaque or frosted glass fixture

• PROGRAMMABLE LIGHT CONTROL - This Light Control can be programmed to automatically turn your light fixture ”ON” at dusk and “OFF” after 2, 5, or 8 hours or dawn depending how you program it.
• COMPATIBLE WITH MANY BULBS - Works with incandescent, compact fluorescent and LED bulbs.
• EASY TO INSTALL - To install, simply screw the control into a lamp socket and screw a bulb into the control. Unit is programmed by simply pressing the Timer button.
• DIGITAL MICROPROCESSOR - Digital microprocessor for full brightness and no flicker operation.
• PRODUCT DETAILS - 120V~, 60Hz. Polyethylene terephthalate (PET) plastic. Do not use with opaque or frosted glass fixtures. Outdoor use with rain tight fixture.

• ☽ DUSK TO DAWN FEATURE: Built-in sensors that turn on the dusk to dawn light bulb automatically at dusk and turn it off when it's dawn. This eliminates the need to physically turn the bulb off and on.
• ☽ ENERGY SAVING: The dusk to dawn Light bulb uses less power compared to traditional bulbs and, therefore, cuts your electricity costs.
• ☽ LONG LIFE: The outdoor smart light bulb is made of plastic mask according to the LED chip unique cooling requirements thus ensuring long life.
• ☽ IMPROVED SECURITY: The outdoor sensing light bulb will light up your home even when you are not around as long as it is dark.
• ☀ Worry-free After Sales: 12 Months REPLACEMENT. We will replace the dusk to dawn light bulb if there's any problem.

User questions & answers

Question:	After installing bulb, do you turn on the power and leave it on
Answer:	More bluish than warm yellow. Having said that, color can be a little subjective, but these are very “cool”.
Question:	If I have three bulbs grouped relatively close to one another will they still function properly? Will light from other bulbs cancel out the censor
Answer:	I just checked my box.....it does say “Indoor”, but on the end of the box it says “suitable for damp locations”. I’ve had a couple out side now for about 10 days and they are still working.
Question:	Will these work in an outside light fixture turned upside down. I seem to have problems with dusk to dawn sensor is when turned upside down
Answer:	No! I just bought these last week and when I got them they clearly say “indoor” on the box. Luckily I have recessed lighting in the house so I will eventually use them one day.
Question:	Do these work inside a frosted light fixture casing
Answer:	Would not work in older motion fixture (cheaper fixture from Lowes about 8 yrs old). Strobe-like flashing, would make for a great 80s party light 😁.

• Voice Control: LoraTap smart lamp holders are compatible with Amazon Alexa (Amazon Echo/Dot/Tap)/Google Home, that allows you to turn on/off the lights with voice commands. It gives you an intelligent life, very convenient to use especially when your hands are full
• App Control: Download the free application "Smart Life" on your mobile phone, connect to your Wi-Fi (only 2.4 GHz) and you can control your lights remotely from anywhere with the Smart Life app and turn the lights on/off any time
• Timing Function: No hub required, the sockets are compatible with most wifi routers. Screw the bulb socket in, you can transform your normal bulb into intelligent (smart) while keep your style! Set timer and countdown, or create scenes, the porch light can automatically turn on at night and turn off in the morning
• Group Control: Set all the smart bulb sockets in one group, you can turn them all off with one key command. One wifi socket can be controlled by multiple mobile phones. Share it with your family members, everyone can control it easily. Perfect for hard-to-reach lamps without ON/OFF switches
• Wide Compatibility: Works with most E26 bulbs including LED Bulb, Smart Bulb, CFL Bulb, Fluorescent Bulb, Corn Light Bulb etc., but NOT Incandescent Bulb, Halogen Bulb, or Tungsten Bulb / voltage 100-120V AC, max load 2.5 amp, max power 30W. | Bulb Socket Dimensions (Dia x H): 2.68 x 2.83 in, it adds approximately 1.58 in (4 cm) to fixture height

User questions & answers

Question:	Will it work with 220 volts
Answer:	Hi, these wifi light sockets can work with 220V, but the base is e26, they cannot work with E27 light socket. If you need E27 light socket, you can find it on our european store. Any more help you need, please feel free to contact us via [email protected]
Question:	Will they work g10 bulbs
Answer:	Hi, the light sockets are e26, they cannot work with GU10 bulbs. If you want to make your light smart, you can also consider our wifi relay switch, link: https://www.amazon.com/dp/B07PLQ25BT and the wifi touch switch, link: https://www.amazon.com/dp/B07V4FV3QZ
Question:	Once installed, can I turn on and off lights from anywhere? for example out of state or in a different city with the app
Answer:	Absolutely, all operations are done from the Mobile App, as long as you have mobile internet, you can turn on and off whenever and wherever you are.
Question:	Is there any way to schedule these lights to follow the sundown/sunup schedule
Answer:	Yes there is on the app

Product features

LoraTap Smart WiFi Light Bulb Socket Compatible with Amazon Alexa and Google Home

LoraTap smart lamp holder can work perfectly with Alexa-enabled devices like Echo/Tap/Dot, as well as Google Home. Just with a simply voice command, Alexa or Google Assistant will work for you, turning on/off the connected lights at once. Just say,

“Alexa, turn on the light.”

“Hey Google, turn off the bedroom light.”

......

Easy to Use

1. Search " Smart Life " on App store, Google Play, or Scan the QR code on the User Manual and install it;

2. Register an account with your email;

3. Turn the smart lamp holder on;

4. Add device on the app;

5. Select your Wi-Fi(2.4GHz only) and enter password;

6.Wait for connecting and assign a name to each lamp holder.

Share with Your Family

Family can access to one device to control every connected light, just use the share mode by one step, then they no need to connect the light again.

All Lights are Under Your Control

LoraTap smart light socket allows you to transform your traditional lights into smart. No need to walk around in your house to turn the lights on/off one by one, all are at your fingertips. Just enjoy the intelligent life!

App Control from Anywhere

With the remote access, you are able to check the real-time status of the lights at anytime and anywhere. No more worry about forgotten turning off lights, you can turn off the connected lights wherever you are. Your lights on/off before arriving home or after leaving.

Group Control

Set all the smart bulb sockets in your living room/bedroom/studio in one group according to different space, you can turn them all off with one key command.

Set Schedules / Timer

LoraTap smart light socket enables you to set timer/schedules for your lights or lamps. To do this, you just need to set the single/repeat/countdown timers on the Smart Life app, then you can schedule the connected light to turn on at 6:00 pm or turn off after you go to bed every day.

• Plug and play, no wiring , timers or additional hardware needed, built-in photcell sensor, automatic turn on when the room gets dark, when the sensor detects ambiant light, the light automatically turns off.
• 12-watt LED provide 1000 lumen's of warm white, ultra bright & equivalent to a 100-watt incandescents with 85% less energy use.
• Indoor/Outdoor use, waterproof/weather-proof, works in any position(up/down light fixture), Suitable for totally enclosed luminaires/fixture ( clear/translucent/frosted )
• No flicker, No flash, No mercury, 100-240V AC operating voltage, rated to last 13 years based on 3 hours per day use.
• Tips:1.Not suitable for use with dimmers 2.Power switch should always be left on as the bulb will shut off on its own when it senses daylight 3. make sure the bulbs are not pointing directly at each other to avoid interference( bulb distance keep at least 2meter/6.6ft)

Product features

Works Well

works well in enclosed light fixture with clear cover

Works Well

works well in enclosed light fixture with frosted cover

Works Well

works well in open light fixture

NOT WORK

not workable in recessed in fixture

Product description

Turn any ordinary bulb (incandescent excluded) into a smart wifi controlled light bulb with LoraTap Smart WiFi Bulb Socket. Just screw in a bulb - that's it! No Hub required! You can transform your normal bulb into intelligent (smart) while keep your style!

Compatible with Alexa & Google Home & IFTTT : With a simple voice command, Amazon Alexa or Google Assistant will work for you, turning the connected devices on or off immediately. IFTTT allows you to integrate all your devices, apps and social media, providing new control methods.

Warranty: The wifi light bulb sockets are CE and RoHS certified. LoraTap offers 1 year warranty on this product, any help you need, please contact our customer service.

For indoor use only.



Specifications

Smart Socket

Color: white

Voltage: 100-120V AC, 50/60Hz

Max. Load: 2.5 Amp

Max. Power: 30W

Screw Base Type: E26

Compatibility: E26 LED, CFL, Fluorescent bulbs, etc., but NOT Incandescent Bulbs, Halogen Bulbs, or Tungsten Bulbs

LED indicator light color: warm white

Bulb Socket Dimensions(Dia x H): 2.68 in x 2.83 in, it adds approximately 1.58 in to fixture height.

Package includes

1 x Wifi Light Socket

1 x User Guide

• Voice Control: LoraTap smart lamp holders are compatible with Amazon Alexa (Amazon Echo/Dot/Tap)/Google Home, that allows you to turn on/off the lights with voice commands. It gives you an intelligent life, very convenient to use especially when your hands are full
• App Control: Download the free application "Smart Life" on your mobile phone, connect to your Wi-Fi (only 2.4 GHz) and you can control your lights remotely from anywhere with the Smart Life app and turn the lights on/off any time
• Timing Function: No hub required, the sockets are compatible with most wifi routers. Screw the bulb socket in, you can transform your normal bulb into intelligent (smart) while keep your style! Set timer and countdown, or create scenes, the porch light can automatically turn on at night and turn off in the morning
• Group Control: Set all the smart bulb sockets in one group, you can turn them all off with one key command. One wifi socket can be controlled by multiple mobile phones. Share it with your family members, everyone can control it easily. Perfect for hard-to-reach lamps without ON/OFF switches
• Wide Compatibility: Works with most E26 bulbs including LED Bulb, Smart Bulb, CFL Bulb, Fluorescent Bulb, Corn Light Bulb etc., but NOT Incandescent Bulb, Halogen Bulb, or Tungsten Bulb / voltage 100-120V AC, max load 2.5 amp, max power 30W. | Bulb Socket Dimensions (Dia x H): 2.68 x 2.83 in, it adds approximately 1.58 in (4 cm) to fixture height

User questions & answers

Question:	If I’m at home, we have no internet, but my phone does, Will this work for me
Answer:	nop, this item need the wifi conection to respond.
Question:	is a control for 3 way lamp bulb available
Answer:	no
Question:	will it work from the switch as well? Or only from the App
Answer:	Both
Question:	Does this work on iOS
Answer:	The wifi light socket works with Smart Life app provided by Tuya Inc., it's available in iOS App Store. Any more question, please feel free to contact us via [email protected]

Product description

The Westek SLC9BC Programmable Light Control is perfect in laundry rooms, garages, basements, attics or any area indoors or outdoors where you need light. This device converts any light socket into a programmable night light that automatically turns on in low light conditions, adding safety and security to any space. The light will turn off at a selectable time of 1, 2, 5 or 8 hours or can be set to turn off at random times to discourage intruders. Integrated micro-processor ensures more accurate off-time. Easy installation; screw the sensor into any existing light socket, then install a bulb up to 100w into the control. Compatible with LED, incandescent, and CFL bulbs. AmerTac manufacturing brands offer complete lines of distinctive decorative home accent products that include trend-setting wall plates, money saving LED night lights, innovative under cabinet lighting and LED battery operated lights. More functional product lines include energy-saving timers, dimmers and lighting controls, as well as an extensive offering of consumer electronics accessories for the home and office. AmerTac's products are distributed to leading home centers, lighting showrooms, mass merchandisers and supermarket chains throughout North America.

From the Manufacturer

Due to continuing product development, the product you receive may look slightly different than the one displayed.

• Perfect night time lighting solution
• Convert any light socket into an automatic night light
• Works with LED, incandescent and CFL bulbs up to 100w
• Great for laundry rooms, garages, basements, attics and more
• Modern design works with any decor

User questions & answers

Question:	Bought one from you and had shipped to my parents who are having trouble with the programming. Can you provide the instructions so that I can assist
Answer:	hope this helps.....there is only one moving part....a little wheel with numbers on it.for example , set the wheel on 8 and it will stay on for 8 hours after going on.if it does not work it is likely that the photo sensor needs to be turned...just turn left or rght until light comes on at sunset
Question:	Instructions on the box say 75 wt bulb is max for facing down. Inside instructions say 60 wt bulb. Why different
Answer:	I don't know, but this is for incandescent bulbs, because of the heat they generate. If you use an equivalent LED bulb, you won't have to worry about heat issues.
Question:	Are these rated for wet condition? not listed in description. how about cold winter weather up north, holding up? thanks
Answer:	I can't answer the part about wet conditions. But, I would only use it in a light housing on a porch or deck or in a housing fixture that is shielded. I purchased one for my Mom to put in an old Gas Lamp housing in her yard that had been converted to electrical. So it has the wrought iron housing with the glass on four sides. It has been in use around two years now and still going. It is outside, in different humidity through the year, in different temperatures and below freezing in the winter. The only problem I have found, is the light sensor is mounted in a hole in the side. Sometimes will be obstructed by a spider trying to build a web there occasionally. So you will need to check on your fixture, keep it clean and keep the light sensor hole clean. I've read several reviews where some said theirs' would stop working after a while. This could be the problem.
Question:	Instructions say you can only use a 60wt led bulb if unit is facing down. what happens if we use a 75wt led bulb
Answer:	I. Believ it's a heat issue. Use 60w daylight bulb

• 💎Dusk to Dawn: Built in photocell light sensor automatically detector the brightness, auto turn on at dusk(brightness30Lux).
• 💎 Convenience: Plug and play, E26 base, timers or no additional hardware needed, you just need to turn on the switch one time,you don’t need to open the switch anymore, the bulb will auto on and off.
• 💎 Save energy: These 9 watt dusk till dawn sensor bulbs provide 600-650 lumen's of 3000 Kelvin Warm white, which is equivalent to 60-watt incandescent with 85% less energy use,saving up to $55.94 over the life of the bulb vs. its incandescent equivalent (based on 3 hours/day, 11 cents/kWh, may vary depending on rates and use)
• 💎Wide Application: Indoor/Outdoor use, waterproof/weather-proof, works in any position(up/down light fixture), Suitable for totally enclosed luminaires/fixture ( clear/translucent/frosted )
• 💎Important Tips:1.Not suitable for use with dimmer 2.Power switch should always be on as the bulb will shut off when it senses daylight 3. make sure the bulbs are not pointing directly at each other to avoid interference( bulb distance keep at least 2meter/6.6ft)

Product features

Dusk To Dawn, Auto on/off

Boxlood Dusk to Dawn Light Sensor LED Bulb automatically with photosensor, auto turn on in the evening and off in daytime.

-Automatically turn on at dusk(<15LUX)

-Automatically turn off at dawn(>30LUX)

Light Your Way Home

Every night when you get off work, it will automatically turn on the lights for you to greet you get home. Light up your way without wrestling.

Suitable Fixtures

1. works well in enclosed light fixture with clear cover
2. works well in enclosed light fixture with frosted cover
3. works well in open light fixture
4. not workable in recessed in fixture

Plug and play, no wiring , timers or additional hardware needed

1. Please keep the switch on,

2. It can work with AC100-240V, but is not dimmable.

3. If you install 2 bulbs in the same place, please keep 1.5 meters distance.

4. If you use it outdoor, it is better to use a lampshade to cover it.

5. E26 base, plug and play.

6. It can use outdoor/indoor.

PLUG AND PLAY

• Dusk to dawn light sensor: This sensor light bulb will lights up automatically at night, goes off during the day, so it can be used as the security light in your front door, porch, yard, patio. Updated Version: Replace spare parts to ensure no flashing.
• Save Energy bills: LOHAS 6W Led dusk to dawn light sensor bulb can replace a 40 watt incandescent light bulb, and save energy bills for lighting off automatically at night.
• Easy to install: This A19 E26 Led bulb can fit most fixtures, and warm white 2700K 500lm is perfect for the home lighting, replacing your old cfl, halogen or incandescent bulbs with these warm white Led bulbs.
• Wide application: This indoor outdoor sensor light bulb can be instal Led in porch, hallway, pavement, front door, garage, driveway, patio, stairways, outdoor sconce lights, etc.
• Lifespan: Rated 30000 hours lifespan, which reduces the frequency of re-lamp. No lead or mercury. No Uv or Ir. Ce, Rohs, Fcc compliant. Instant on and no flicker.

User questions & answers

Question:	Will these bulbs work properly on a mostly shaded patio? as in, not be on all day
Answer:	Must be hardwired
Question:	I need a 220 volts
Answer:	Yes, it can controlled by wall switch.
Question:	Can you turn these on manually during the daytime
Answer:	About 4 inch
Question:	Are these light bulbs montion sensor or dust to dawn
Answer:	Come with lines connect to the wall power lines. You can also connect the lines to a switch on the wall to control it.

Product description

BN-LINK 24 Hour Heavy Duty Plug-in Mechanical Timer Grounded is essential for all hydroponic system applications. Programming can be set for multiple on/off events, so your entryway will be lit when you arrive home. This plug-in timer provides up to 48 on/off settings per day and the cycle repeats every 24 hours. Easy to set in 15-minute intervals with never-lose segment pins that can't be removed or lost. Use the manual override button to turn the timer on or outlet on, so you don't have to delete any preprogrammed settings. Plug fans, lamps, or holiday lights in and set the timer to turn the device on and off so it won't remain on when unused. The Timer provides safety and security as you come home to a lighted house. No fumbling for the light switch or tripping over obstacles in your way, the lights are on when you walk in the door. This timer is compatible with compact fluorescent lighting, LED bulbs. The BN-LINK Timer brings simplicity to your life, by maximizing convenience, security, and energy savings.

• ✓ NO LOOSE PARTS: Unlike classic timers with removable pins, our timer features an easy to use, built-in pin dial that allows you to set your timer by pressing the toggle pins down for ON, or keeping them up for OFF.
• ✓ SAVE ENERGY & MONEY: Our timer can be used to automate most small home appliances. Use on your fans, lamps, hydroponics, coffee machines, and more
• ✓ AUTOMATE YOUR HOME OR OFFICE: Turn on and off lamps, small appliances, Christmas trees, and other electrical devices with a handy timer.
• ✓ VERSATILE & CUSTOMIZABLE: Each pin represents 15 minutes for added customization. Set up to as many as 48 ON/OFF programs to automate your home appliances. Timer can also be used as an interval timer.
• ✓ SAFE & RELIABLE: Our 3-prong, grounded timer outlet is UL listed and rigorously controlled for quality and safety. Rating: 125VAC, 60 Hz, 1875W, 15A Tungsten & Resistive, 1/2HP

User questions & answers

Question:	When this is plugged into a two outlet wall plug, is there room to use the other wall outlet, or is it blocked by the timer
Answer:	Plug the timer into the top one, it is fine, you can still use the lower outlet.
Question:	how many watts of power does the unit itself used (when output is off
Answer:	I think the 1875 watts is how many watts it can support. We used it for a space heater, which was around 1500 watts, so it should work for almost any device, but it wouldn't support two space heaters, for example.
Question:	How can I use this to turn my tv off all night? Our tv has a glitch where it’ll suddenly turn on. I find myself up at 2 or 3am turning it off
Answer:	You can set this timer to only provide power during your daylight hours (say, 6am-10pm). The timer will therefore not provide power at night, keeping your tv off.
Question:	Is it quite
Answer:	It’s not silent; the mechanism makes a little sound — not a clock-like ticking — every few seconds as the clock slowly advances. I use mine primarily to switch lights in my home office when I am in another part of the house or away from home. So noise is not a problem. When I’m in my office and it’s running, I have never found it distracting. Of course, another person may not agree.

Product features

BN-LINK 24 Hour Plug-in Mechanical Timer Grounded

Save energy and automate your home's lights, fans, and appliances with BN-LINK's easy-to-use 24 Hour Plug-in Mechanical Timer. Just set your schedules and go, and you'll never worry if you left the lights on ever again.

Save Energy and Simplify Your Life

No more thinking about forgetting leaving your lamp on

Save Energy and Simplify Your Life

Holiday Spirits without breaking the bank

Save Energy and Simplify Your Life

No more plugging and unplugging. Just set a program

Save Energy and Simplify Your Life

Fully automated for your hydroponic grow system

• ✔【 Samsung + Full Spectrum + Red】Each LED grow light bar contains 21 pieces of efficiently growing LED Chips that provide perfect spectrum for indoor plants.6 strps: 18 Samsung 3500K LEDs help plants with chlorophyll synthesis to intake More energy for better germination; 18 red LEDs contribute to photosynthesis, germination, flowering and results; 18 pieces of 6500K and 72 pieces of 3500K full spectrum LEDs provide sunlike light for plants, make plants grow just like in the nature.
• ✔【3H/6H/12H Auto Timing】This timer allow you to turn it on and off at a pre-set time, which has 3H, 6H, 12H 3 timing modes, 3 color lights correspond to the 3 modes. When the indicator is off, the timing function is off. ATTENTION: This timing function is 24H cycle timing. In the case of continuous power, the cycle will work, and it will be invalid after power off. Don't worry about forgetting to turn on the light for your plants when you are busy.
• ✔【4 Brightness Levels ＆ Dual-Channel】 Our LED plant strips have 4 adjustable brightness levels: 25%, 50%, 75%, 100%, to meet each plants lighting requirements at different stages. Dual channel control can divide 6 pcs light bar into 2 sets each of 1~5 light bar, different kinds of plants or growth states, which require different irradiation time, which is convenient for you to control. You just need to press the middle button to select to open the specified channel or open all channels.
• ✔【Can be installed anywhere】 Compared with traditional growing lamp that can only be hung: 3 meters long double-sided tape can help you stick it on the wall or wooden board; 15 cable ties can help you fix it on the shelf, and if you want a longer distance, the package also contains three 1.5 meters power cords.
• ✔【Warranty 】We are a professional LED grow light manufacturer with 9 years of experience, if you have any questions, please feel free to contact us by E-mail, we will offer you professional guidance to help your plants grow better. We provide 1-year warranty plus 30 days money back guarantee.

User questions & answers

Question:	Can these just be turned on and plugged into a timer
Answer:	Yes, I chose to unplug the timer that came with the lights and plugged them into my own timer that turns them on for certain hours each day. The timer that came with the lights will turn them off after whatever amount of time you want 3, 6, or 12 hours) but as far as I could tell you have to turn the lights on manually.
Question:	does this have uv and ir
Answer:	No it doesn’t, it does have the spectrum light to grow the plants
Question:	Can I use these to grow microgreens
Answer:	I would think so. I am using them for mini bell peppers, basil and petunias right now.
Question:	I ordered 2 sets of the 6 pack of lights, how many lights can I string on one plug? Would it support all 12 lights
Answer:	My previous answer is wrong. I have looked at my customers installation and I see the power supply will not support any more than the string of lights it is packaged with. You can, however, plug two strings into the same receptacle. The power draw is about 1/2 an amp at 120 volts ac per string.

Product features

Features

• 84 LEDs: Samsung + Full Spectrum + Red
• 3H/6H/12H Auto Timing
• 4 Brightness Levels
• Dual-Channel
• Multiple installation methods

Product Information

• Actual Power: 20 Watt
• Light Source: Samsung LED Chips
• Working Voltage: AC100~240V
• Frequency: 50/60 HZ
• Lifespan: 50000 Hours
• Working Temperature: -20℃~50℃
• Working Humidity: 23~60%RH
• IP Rating: IP62
• PPFD(60cm): 22μmol/(㎡.s)
• Dimension: 410*19*15MM

Using Tips

• Using three 1.5 meters of power cord and double-sided tape, you can get a larger irradiation range.
• Samsung LED is extremely bright, please do not look directly.
• Max using hours:18 hours per day.

• 【Voice Control】Easy voice control of all 2pack A19 shape E26 E27 Base Smart bulb via integration with Amazon Alexa Echo,Google Assistant, this includes turn on/off, brightness/temperature and scenes. Ex, you can say, "Alexa set the bedroom to warm.No Hub/Bridge Required!
• 【APP And Remote Control】Keep connecting WiFi smart light bulb with your home network (only supports 2.4GHz Wifi), you can remotely control smart light bulb on your smartphone when you leave home or travel
• 【Timing And Group Control】 Never come home to a dark house - by using light schedules on the 'Smart Life' app and be greeted with warm light. The timer function enables smart led light bulb power on and off automatically, Time Setting for Sunset –sunrise，Group control function allows you to control more than one smart light bulb at the same time for scene setting
• 【RGBCW Multi-Color And Dimmable Brightness】 RGB+ Cool white + Warm white smart bulb Choose What Color You Want with 16 million colors and the brightness of every color is dimmable The light brightness can be fixed percentages from 1% - 100% output. No Droning-No Flashing
• 【90 Days Free Turn And 1000 days Tech Support】13W 1300lm smart bulb A19 shape with E26 base, equivalent to 120-150W traditional incandescent bulbs. Saves up to 90% energy, Last longer and energy saver: Approximately 50,000 working hours.if you encounter any problem or need support, please feel free to contact us on Amazon directly.

User questions & answers

Question:	My apartment has a community wifi with installed routers and each with individual account. where do i find the mac address on the bulbs
Answer:	Yes I use mine on my patio which only gets a few hours of sun a day and they do not come on until sun down.
Question:	What permissions does the app require - does it require personal data sharing
Answer:	Sorry, these bulbs' voltage is 110 volts to 130 volts.
Question:	Cam you control individual bulbs separately or only as a group? (ie: able to control two in bedroom & two in living room separately
Answer:	There is a light sensor in the bulb, and the light sensor will detect the light automatically. Only in the dark area, the bulb lighten up. Thank you for your inquiry.
Question:	So far these suck. i've tried to connect and troubleshoot every way possible. this is the 1st time i've had an issue with any "smart" light. any help
Answer:	These are only dawn dusk sensors - and they work really well.... would buy more if I needed. Plenty bright enough and come on and go off efficiently (i.e. when they should)

• LIGHT BULB TIMER – let smart Photocell sensor technology turn your indoor and outdoor lights on and off automatically. An alternative to expensive dusk to dawn light bulbs and separate light switch timer devices
• DUSK TO DAWN – the lights come on at dusk and turn off at dawn. Or customize your lighting with 2, 5 and 8 hour timed settings. Also features a "random" feature to confuse potential intruders
• OUTDOOR AND INDOOR – an ideal outdoor lighting device for porch lights and floodlights as well as indoor lights such as entrance hallways. Keep your pathway lit in the dark and save energy and money
• SECURITY FOR YOUR HOME – designed with you in mind, you can simulate home occupancy to deter intruders when you’re away from home. This is a must-have item for vacation homes and vacant rental properties
• EASY TO INSTALL – turn off the power and screw the compact light control device into the light socket. Screw your lightbulb into the control. Program your control as required. No wiring or tools are needed. Works with up to 100W incandescent, compact fluorescent and LED bulbs. Do not use with opaque or frosted glass fixture

User questions & answers

Question:	How far down will the light bulb be extended, don't want the bulb to stick out
Answer:	I bought 2 of these and the both died in less than a month. Amazon has a much better deal with these -Philips LED Dusk-to-Dawn A19 Frosted Light Bulb: 800-Lumen, 2700-Kelvin, 8-Watt (60-Watt Equivalent), E26 Medium Screw Base, Soft White, 3-Pack. I really like them because un-like the Westek sensor these work. It is a regular size light bulb with a built in sensor.
Question:	Will your fixture wwork in aan enclosed amber colored glass cover outside? Fixture diameter must fit inside a 3.5" opening. Wjll it fit
Answer:	The diameter of the widest section where the controls are is about 1-7/8 inches. The length when it is screwed into the socket would be about 2-1/2 inches. The bulb you use would stick out from the 2-1/2-inch length of the controller. The diameter of the controller should fit well inside the 3-1/2-inch diameter of your glass cover.
Question:	Hi, will this light control work with 220v-240v or it’s just intended for 110v
Answer:	The package indicates 110V 60HZ. I would NOT try it in a 240V circuit.
Question:	Why isn't the timer feature working. It's recognizing dusk but instead of turning off after 5 hours it's going until dawn
Answer:	Are you sure you're pushing the timer button twice, with the power on (light turned on)? Push once, the light blinks once, push again, it blinks twice; timer now set for 5 hours. The blinks confirm the setting. Do not turn it off. If you turn it off, it resets to the dusk to dawn setting.