9 best lamp holder for 250 watt bulb

Product description

Ceramic heating bulb: suitable for reptile heating.

Waterproof: the ceramic bulb has passed the waterproof test and can be used safely in humid environment.

No light: no light, giving reptiles a more comfortable sleep environment.

Parameters: length 4.3 inches, width 2.95 inches, black, cermet material.

More options: 75100 150 200W ceramic heating bulbs are available.

• Ceramic heating bulb: suitable for reptile heating.
• Waterproof: the ceramic bulb has passed the waterproof test and can be used safely in humid environment.
• No light: no light, giving reptiles a more comfortable sleep environment.
• Parameters: length 4.3 inches, width 2.95 inches, black, cermet material
• More options: 75100 150 200W ceramic heating bulbs are available.

Product description

Description:

This is a simple and vintage E27 light holder desk lamp base with pull chain.

It fits well with standard E27 screw bare bulbs and it's easy to install with M10 thread.

Features:

This is a high quality lamp holder with a zipper,compatible with E27 bulb remote control lamp holder,made of high-quality aluminum,durable and easy to dissipate heat

Easy installation: only a few minutes to install the lampshade holder

Retro style,simple design,highlight your aesthetic taste

Widely used in the kitchen,bedroom,restaurant,bar,restaurant,cafe,hotel and so on

Specifications:

Condition: 100% Brand New

Material: Aluminum

Power: 250W

Voltage: 250V

Bulb Base Type: E27

Color: Golden,Silver,Bronze,Black(optional)

Total Length: Approx. 8.5cm/3.35in

Weight: Approx. 48g

Package Included:

1 * E27 Lamp Holder with Pull Chain(No Bulb)

Please Notice:

♛ Due to manual measurement,please allow 0-0.05 inch error， thank you for your understanding.

♛ There may be subtle chromatic aberrations between objects and images,and we that we have adjusted to the most realistic state.

♛ : If you have any question before/after your order,please contact us freely. We will make things right.

• This is a high quality lamp holder with a zipper, compatible with E27 bulb remote control lamp holder, made of high-quality aluminum, durable and easy to dissipate heat
• Easy installation: only a few minutes to install the lampshade holder
• Retro style, simple design, highlight your aesthetic taste
• Widely used in the kitchen, bedroom, restaurant, bar, restaurant, cafe, hotel and so on
• Total Length: Approx. 8.5cm/3.35in

Product description

Feature and Advantage: has a metal guard to protect the bulb. Each unit features adjustable ball joint. Specification: volt: 120V MAXWatt: 250Wcord length: 6 FEET

• Multifunction: perfect use with heat lamp for amphibians and reptiles pets terrarium, incubating chicken, also can be used as a table lamp in your room, garages or art studios, a work light in photography and workshops
• Practical clamp: the clamp have stronger clamping grips for a safety hold, scratch-resistant sleeves not only prevents slipping, but also do not leave marks on your surfaces
• Adjustable ball joint: The adjustable ball joint makes it easy to position the light in the most favorable location. Has a metal guard to protect the bulb
• Advantages: Porcelain socket for safety, rated for up to 250W Bulb (E26), SPT-2 18/2 6 feet long cord
• Package Include: 1 pack clamp light with steel cage (no bulb included)

User questions & answers

Question:	On Switch
Answer:	No
Question:	Will this work with an Incandescent bulb
Answer:	Yes. The screw base is ceramic so it should handle heat well. It says it's rated for up to 250 watt bulbs. It seems high quality.
Question:	What is the diameter of the opening at bulb end? Will it fit around a 250W red heat bulb
Answer:	4.5 inches. It does not fit the 4.9”, 250W ceramic heat lamp I bought.
Question:	Will this work with "therabulb nir-a near infrared bulb - 250 watt - 120 volt " listed on amazon? how far would the cage extend beyond a 250w bulb
Answer:	Yes. 250v and 660w.

• ✔ Solid Ceramics Socket - This white reptile lamp holder can be well resistant to high temperature and durable
• ✔ Fully Adjustable - Upgraded lengthened and adjustable metal stand, it can be rotated 360° in any direction
• ✔ Strong Clamp Design - Simple and easy to use, just clip it on the table or other edge of pet house, also please adjust the distance between the lamp and the pets in case it is caught
• ✔ Easy ON / OFF - Switch design in the middle of the wire, turn off the power supply when installing or removing the lamp holder or light bulb. (To prevent electric shock / burn)
• ✔ Wide & Safe Use - Can be equipped with E26/E27 screw base light bulbs, ceramic heat lamps, UVA/UVB infrared emitters (Caution: Light bulb‘s power at 250-Watt or less, or in the range of 250℃ above the surface temperature of the bulb/lamp.)

User questions & answers

Question:	Does ot come with the bulb
Answer:	6"

Product description

Leviton Lamp Holder, 2-Circuit, 3-Way, Series: Electrolier, 250 W Lamp, 250 V, Incandescent Lamp, Medium Base, 2-Terminal Screw Terminal, 1/8 in IPS Tapped Bushing With Set Screw Mounting, Porcelain Body, Aluminum Shell, Brass, Unglazed, Polished Gilt, 1.38 in Overall Diameter, 2.56 in Overall Depth, UL Listed, CSA Certified, Pull Chain Access. .

From the Manufacturer

Incandescent Lampholder, Metal shell, medium base, 250W-250V, Pull Chain, with Cap and Shell, Cap with Set screw, Polished Gilt Finish

• Incandescent Lamp holder
• Metal shell
• Medium base
• Model number: 7092

User questions & answers

Question:	What do you mean by 2 circuit
Answer:	The newest is the USB C version
Question:	does it work witth 3 way LED bulb
Answer:	Not with this offer. I’m sure if you look around it wouldn’t be difficult to find one.
Question:	i have old 2 globe lamp. upper globe=40-60 w bulb. lower=nightlight. switch positions: 1st=upper, 2nd=lower, 3rd=both. is this the correct item
Answer:	No it can only use button top 21700 batteries
Question:	Does this have a porcelain socket or not
Answer:	Yes as long as you have a USB wall charger to plug it in to. Like the ones that come with A cell phone.

• Standard. ACBungji light bulb socket has an electrical rating of 250VAC and 250W,fits for 1 inch/2.6cm lamp cap.
• Easy to Wire Up. Built in thread nut and screws,well constructed with 3 parts,easy enough to install with your light fixture.
• DIY Lamp Projects. Simple upgrade to your old lamp socket,such as Edison bulb,CFL bulb,LED bulb,hanging light,pendant lamp,outdoor light.
• Great bang for the buck.Multi-pack lamp holders for your desk lamp,bed lamp,dining-room lamp,bar counter lamp,fancy lamp,even for future projects.
• Improve Atmosphere.Whether family drinking habits in dining room,industrial look in office,beauty light on dresser,warm and sweat beside bed,or regular lighting system,ACBungji light socket helps you enjoy the moment.

User questions & answers

Question:	Is it just a hot and neutral connection or is there a spot for the ground wire on the holder
Answer:	Add a few drops of oil to where the air goes in every time you use it.
Question:	are your light sockets rated for outside
Answer:	I don’t think so this wrench is heavy! Work well
Question:	Do you sell just the light covers 3 are broken and the the silver housing unit is out
Answer:	Max.Torque is 500FT-LB(680N-M). For safety, top performance and maximum durability of parts, operate this tool at 90 PSI; 6.3 bar max air pressure with 3/8" diameter air supply hose.
Question:	What's the thread specification for the hole on the opposite end from the bulb
Answer:	Thanks for your comments. Lubricate the air motor daily with high quality air tool oil. If no air line oiler is used, run 1/2 oz. of oil through the tool. The oil can be squirted into the tool air inlet or into the hose at the nearest.
Question:	So i have a bearded dragon and i her 150w red night light died. should i get the 100w or the 150w? i'm not sure if it is more powerful
Answer:	The kong frog is quicker and easier than a carabiner to attach and release.
Question:	Can this reach full (or close to full) heating potential instantly or within 2 seconds
Answer:	We can only guarantee that it will work on all sizes of KONG Coolers. The KONG Bottle Biter is not guaranteed to fit other cooler brands.
Question:	Is the bulb suppose to have a slight burning smell ? I have it I. A omaykry e 27 ceramic and it seem like it dosent screw all the way in is this norma
Answer:	We only guarantee that the KONG Bottle Biter will work with KONG Coolers.
Question:	I use regular red or clear 250 heat lamp bulbs for my outdoor cat’s area outside (it is covered). Anyone know if this would fit? As warm
Answer:	No, the curve is too tight and the bolt is too big to fit into a Yeti.

Product features

ACBungji E26 light socket, Standard Screw-in lamp socket holder for bulbs

What is E26 Light Bulb ?

It is one common bulb which thread specification diameter is 26mm, the most light bulbs used in daily, also referred to as having a “medium” or “standard” base.

Tips

This basic light bulb socket is for regular light projects, doesn't accept lamp shade.

The right process to change a light bulb socket

1-Remove old lamp hardware. After turning off power switch,just wiggle old light socket, pull up the top cap,then cut off wire to remove old switch.

2-Prepare wire. Using wires trippers,cut the insulation from around each wire,twist them up and keep them nice and solid.

3-Accept new light socket. Wrap wire around one terminal in a clockwise motion,then tighten the screw with screwdriver.Repeat these with another terminal.

4-Test. Put cover on and snap it back down into the socket base,put on the new light,open power switch.You successfully complete light socket replacement when it lights.

Product description

2 Pole, 3 wire outlet. NEMA 5-15R. Quality materials, durability, and time-tested design. 250W 250V Color: White Incandescent Plastic pull chain lampholder 15A, 125V 2 Pole 3 wire outlet NEMA 5-15R Bulk.

• 250W, 250V, white, Incandescent, plastic pull chain lamp holder, 15A, 125V, 2 pole, 3 wire outlet, nema 5-15r, bulk
• Adds Extra shine to your product
• Manufactured in China
• Plastic ceiling lamp holder
• Medium Base
• 660 Watt 250 Volt
• Plastic ceiling lamp holder

User questions & answers

Question:	does this product have wires that need to be connected
Answer:	No wires. You connect your local wires (your circuit) to the three connecting screws.
Question:	Where can I find this in different colors? (Black/oil rubbed bronze, preferably
Answer:	So far white is common. but they can be painted.
Question:	Can I use this in my garage to hook up my garage door opener
Answer:	Yes you can. Have it wired into the ceiling and plug in your opener. If you need another outlet you can screw an adapter in the light bulb socket and still have a light in the garage also. The pull chain on this item is for the light only so the outlet on it will be hot (on) all the time even if you pull the chain. You will have to install or have installed a metal or plastic housing in the ceiling to mount this to..If you don't need a light all you need is to install an outlet in the ceiling box to plug your opener to so you really do not need this lamp holder. You an buy this same item w/o the outlet also as they put this outlet on this lamp holder to plug in a drill or another item which makes it nice to have the outlet than not. I would advise you have a a qualified electrical person help you or hire him to do the work since you are asking this question as it is sort of hard to explain the complete installation of this item. You can not just wire a piece of conduit to this item without a box for it to mount the wiring and a solid box to screw this lamp holder to. Good luck.
Question:	Does the pull string control the socket
Answer:	I was hoping it would, but the pull string does not control the plug.

Product description

Description:

100% brand new.100% brand new and high quality.

Medium E26/E27 Standard Base.

Rated for up to 250 Watts / 250 Volts.

Cap base has 1/8 IPS standard lamp pipe thread with set screw.

Installation note: These sockets, like most self wire-able metal sockets, come with a cardboard lining inside. This should be left in as it acts as an insulator. Do not remove it.



Specification:

Material:Copper+Aluminum

Size:72mm*34mm

Base Type:fit E26/E27

Watts : Up to 250w

Color:Aeneous Brass



Packge Included:

2pcs * light socket



Note:

1. Due to the light and screen difference, the item's color may be slightly different from the pictures.

2. Please allow 1-2 cm differences due to manual measurement.

• Lamp socket, standard E26/E27 light socket, turn knob switch, clear threaded screw, solid polished color aluminum shell, safe insulater, with antique and industrial appearance, compatible with E26/E27 medium base bulbs especially vintage Edison bulbs, suitable for decorative DIY pendant lighting projects.
• The Light Socket and Edison light bulb are the best match. The Edison bulb allows you to instantly add vintage charm and elegance to your house. The Bulb Socket with switch can be used for lamp or fixture replacement. Screw switch for on/off The Bulb Socket with switch can be used for lamp or fixture replacement. Screw switch for on/off.
• These retro bulb sockets are elegant, unique and sturdy, with four unique metal stress relief wire connectors that fit all of our sockets and all other undercovers. The bottom cover also has screws for mounting. The knob is simple to operate: just unscrew the base to access the two internal wire connections.
• Handcrafted lampstands are easy to use and work well with any wires and standard lampshades. This is a great addition to creating old or industrial style lighting.
• Installation note: These sockets, like most self wire-able metal sockets, come with a cardboard lining inside. This should be left in as it acts as an insulator. Do not remove it.

Product description

250W, 15a, 125V, incandescent porcelain Lamp holder, 2 pole, 2 wire Outlet, 2 screw termination, pull chain, bulk.

• 250W, 15A, 125V, Incandescent porcelain Lamp holder, 2 pole, 2 wire outlet, 2 Screw termination, pull chain, bulk
• Adds Extra shine to your product
• Manufactured in China
• It is 250W, 15A, 125V, Incandescent Porcelain Lamp holder
• It is of 2 Pole, 2 Wire Outlet, 2 Screw Termination, Pull Chain, Bulk
• It is a Pass and Seymour product