14 best wood boilers

Product description

AmTech 300 Professional Strength Wood Boiler Treatment contains Two Levels of Protection, a blend of Nitrites and Silicates. It is safe and compatible with most products produced by other wood boiler manufacturers. AmTech300 has all the same properties as its competitors but at a much lower cost. AmTech 300 can be combined with other manufacturer’s products to increase Nitrite levels to meet needed boiler manufacturers' requirements with equal performance and protection. Safe to use with: Pex piping, Copper piping, Brass piping, Mild Steel piping, Stainless Steel piping, Boiler Plate, Cast Iron piping, Black Malleable fittings & pipe, Titanium piping and Cupro-Nickel piping. Our AmTech300 Boiler Treatment will: Protect your wood boiler from rust, corrosion, and scale Balance pH and Alkalinity Meet or exceed all boiler manufacturer nitrite warranty requirements. Don't pay a premium just for a brand name - one gallon of AmTech 300 Boiler Treatment will treat 300 gallons of fill water and maintain a 1000ppm nitrite level. However, like any other boiler treatment chemical, you must dose your treatment based on the needs of your system. Instructions: One gallon will treat 300 gallons of system fill water. AmTech300 should be added to maintain a minimum of 500-1800 ppm tested Nitrite for proper corrosion protection, OR Follow boiler manufactures nitrite level recommendations. If your indoor or outdoor heating system requires frequent water additions during the course of the season, we recommend the AmTech300 product for enhanced protection. Recommended to test system nitrite levels at least annually or after measurable water loss to ensure proper protection.

• Contains Two levels of protection, Rust Inhibitor
• Formulated to Prevent Rust & Scale, Safe for Stainless & Mild Steel
• Dramatically Reduces Sludge & Mineral Deposits
• Protects Copper and Brass
• Made in the USA

User questions & answers

Product description

The ProTech 300 Outdoor Wood Boiler Water Treatment and Rust Inhibitor offers 3 levels of protection! ProTech 300 Has been designed to be used in Manufacturers boiler treatment programs. These programs insist the boiler owner meet certain nitrite levels in order to comply with warranty requirements in regards to boiler corrosion protection. Adding 1 gallon of ProTech 300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite. Suggested nitrite levels are: 750ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great. Dose system accordingly on required control levels set by your boiler manufacturer and your system’s nitrite need based on test results. The manufacturers can’t tell the difference if you're using their expensive brand or our ProTech 300, so send it into their labs to be tested without worry. The ProTech 300 Outdoor Wood Boiler Water Treatment and Rust Inhibitor works on all Outdoor Wood Boilers and Furnaces. ProTech 300 Outdoor Wood Boiler Water Treatment and Rust Inhibitor can treat up to 500 gallons of water based on water conditions*. *Best to increase dosage if... - Fill water is high in iron - Fill water pH is low - System temp is maintained above 160 degree F - Frequent water additions due to evaporative loss - Fill water has high dissolved solids - Unsure of your system volume Recommended treating up to 300 gallons if the above apply. If the above does not apply, one gallon of ProTech 300 will treat up to 500 gallons of water. ProTech 300 Outdoor Wood Boiler Water Treatment and Rust Inhibitor is commonly used on Central Boiler, Aquatherm, WoodMaster, Cozeburn, Empyre, Freedom, Hardy, Hawken, Heatmaster, Heatmor, Natures Comfort, Ozark, Polar, Sequoyah, Shaver, Taylor, Wood Doctor, Mahoning, and Aspen. ProTech 300 Outdoor Wood Boiler Water Treatment and Rust Inhibitor is also used in Steam Boilers, Hot water systems and closed loop as well as pressurized systems as well. Indoor, outdoor and outside boilers and furnaces are fine as w

• Protect your wood boiler from rust, corrosion, and scale.
• Meets or exceeds all boiler manufacturer nitrite warranty requirements.
• Balance pH and Alkalinity confidently
• Each one gallon bottle treats 300 Gallons at 1500 PPM
• Works with Stainless Steel, Mild Steel and Boiler Plate

User questions & answers

Product description

ProTech 300 Wood Boiler Water Treatment is an inexpensive alternative to brand-name boiler treatment chemicals at half the cost. Our ProTech 300 Boiler Treatment will Protect your indoor and outdoor wood boiler from rust, corrosion, and scale, Balance pH and Alkalinity. The ProTech 300 Outside Wood Boiler treatment meets or exceeds all boiler manufacturer nitrite warranty requirements. Don't pay a premium just for a brand name. One gallon of ProTech 300 Boiler Treatment will treat 300 gallons of fill water and maintain a 1000ppm nitrite level. Important Note: Like any other boiler treatment chemical, you must dose your treatment based on the needs of your system. You can determine the needs of your system by testing your wood boiler water using one of our ProTech 300 do it yourself Wood Boiler Water Test Kits. The manufacturers can't tell if you used their expensive brand or ProTech 300 - so why pay more?! Shaver Wood Furnace recommends this product only!

User questions & answers

Product description

This unit is a Water to Air Heat Exchanger for use in your hot air plenum of your existing forced air furnace. This unit is most commonly used in conjuction with an outside wood furnace to transfer heat into your existing forced air system. It can also be used with any other source of hot water such as a boiler to create hot air. This exchanger is for use with ANY outdoor wood stove and also features quality aluminum fins with seamless copper tubes. These exchangers use Lead-Free solder and can be used with potable water. Our coils are packaged the best possible way to minimize shipping damage. The coils fit snuggly in the boxes to minimize movement within the box. There are strips of styrofoam all the way around the manifold to prevent damage if dropped. The entire coil is packaged in a double wall, cardboard box. These are also packaged with metal port protectors over the inlet/outlet ports to protect them from shipping damage.  Product Data:Finned Area: 14" x 14"Overall Dimensions: 14-1/4" x 16" x 3-1/2" THICKOverall Dimesions (including Copper Manifold): 14-1/4" x 19-1/2" x 3-1/2" THICKRows of Tubes: 3 (3/8" Seamless Copper)Inlet/Outlet: 1" Copper SweatRating: 175 psig/350°FFin Spacing: 12/inch We do our best to offer a high quality product that will not be damaged during shipping and you will not have to return due to manufacturers defects such as leaking. We stand behind the exchangers with a LIMITED LIFETIME WARRANTY AGAINST MANUFACTURERS DEFECTS. A free copy of the written warranty is available upon request to our email address.

• 1" Copper Connections

User questions & answers

Product description

Outdoor Boiler Anti-Corrosion Chemical Treatment (1/2 Gallon) A proprietary outdoor wood boiler specific product - the consumer solution. This is a new and improved formula with chemical detection technology. Draw samples of your water over time to see when it's time to add more treatment! The stronger the color pink from the sample, the better protected you are! Developed by professionals in the field of industrial water treatment. Will work in all makes and models of outdoor wood boilers. Full spectrum of corrosion inhibitors for both ferrous (iron) and yellow metal (copper and brass) system components for complete corrosion protection for your boiler and heat exchanger alike. An additional ferrous corrosion inhibitor is added that actually enables better film formation on the metal surface providing and forming a protective barrier. Calcium scale retarding polymers are added to help keep your heat transfer surfaces clean and efficient. Formulation has the ability to fight under deposit corrosion. Completely buffered and stabilized product. Easily test for chemical level with approved and inexpensive testing methods. You won't find a more concentrated product with these capabilities - 1/2 gallon will treat a full 400 GALLONS of boiler fill water. Shelf life of 2 years. Compatible with glycol (antifreeze) As simple to use as simple gets with the BEST in protection. Dosage: 1/2 gallon per 400 gallons of system fill water. Directions for use: Add treatment directly to system following the recommended dosage rate. Test and maintain at all times a level of 750-1000 ppm of chemical residual using an approved testing method. Add additional chemical as necessary in order to maintain this level. Not intended for systems containing aluminum or aluminum alloy components.

User questions & answers

Product description

MolyArmor 350 Corrosion Inhibitor provides excellent corrosion protection and is easy to test for maintenance levels, with a test strip (no messy chemicals for testing). One gallon of MolyArmor 350 treats 200 gallons of system water. The molybdate-based inhibitors have been proven through decades of use. MolyArmor 350 Corrosion Inhibitor will ensure that a water jacket corrosion failure will not occur when the system water is maintained with MolyArmor 350 at the recommended levels, and the pH and makeup water quality is as recommended.

• Molybdate-based Inhibitor ; Provides excellent corrosion protection
• One Gallon treats 200 gallons of boiler water
• Cleanfire 300, 500 and 700 furnaces have required the use of MolyArmor 350 Corrosion Inhibitor since their inception to full warranty requirements.
• Replaces the WoodMaster brand CorQuest 1200 Inhibitor
• Compatible with uninhibited propylene glycol

User questions & answers

Product description

AmTech 300 Professional Strength Wood Boiler Treatment contains Two Levels of Protection, a blend of Nitrites and Silicates. It is safe and compatible with most products produced by other wood boiler manufacturers. AmTech300 has all the same properties as its competitors but at a much lower cost. AmTech 300 can be combined with other manufacturer’s products to increase Nitrite levels to meet needed boiler manufacturers' requirements with equal performance and protection. Safe to use with: Pex piping, Copper piping, Brass piping, Mild Steel piping, Stainless Steel piping, Boiler Plate, Cast Iron piping, Black Malleable fittings & pipe, Titanium, and Cupro-Nickel. Our AmTech300 Boiler Treatment will: Protect your wood boiler from rust, corrosion, and scale Balance pH and Alkalinity Meet or exceed all boiler manufacturer nitrite warranty requirements. Don't pay a premium just for a brand name - one gallon of AmTech 300 Boiler Treatment will treat 300 gallons of fill water and maintain a 1000ppm nitrite level. However, like any other boiler treatment chemical, you must dose your treatment based on the needs of your system. Instructions: One gallon will treat 300 gallons of system fill water. AmTech300 should be added to maintain a minimum of 500-1800 ppm tested Nitrite for proper corrosion protection, OR Follow boiler manufactures nitrite level recommendations. If your system requires frequent water additions during the course of the season, we recommend the AmTech300 product for enhanced protection. Recommended to test system nitrite levels at least annually or after measurable water loss to ensure proper protection.

• Contains Two levels of protection
• Formulated to Prevent Rust & Scale, Safe for Stainless & Mild Steel
• Dramatically Reduces Sludge & Mineral Deposits, Protects Copper and Brass
• 2 Gallon Pack- Each gallon treats 300 gallons of water
• Made in the USA

Product description

Boiler Rust Inhibitor is a highly concentrated liquid buffered Nitrite/ Borate/ Silicate inhibitor designed for closed loop or open loop Woodstoves or Wood Boilers with minimal water loss. It is: Designed to work with all makes and models of outdoor wood furnaces, woodstoves, and commercial and residential boilers. Formulated to provide proper corrosion protection for copper, mild steel, stainless steel, and aluminum. It may be used with either hard or soft water and is compatible with glycol anti-freeze. One gallon will treat 250 to 500 gallons of make-up water. Contains a P Indicator for ease of proper dosage detection (turns your water a light pink). For systems closer to 500 gallons or if your ground water is low in alkalinity the water may not turn pink, although there will be adequate corrosion protection. Safe for yearly storage if stored in cool, dark area. $1,000,000 product quality insurance quality! ISO manufactured! Just add directly to your system. Product meets all D.O.T. shipping regulations.

• Boiler Rust Inhibitor - Treats 500 to 720 fresh water.
• Use in most outdoor wood boilers. Compatible with propylene and ethyelen glycol.
• Stops boiler corrosion.
• Compatible with Iron, SSTL, Copper, Bronze, and PEX.
• Turns the water pink for product residual and leak detection.

User questions & answers

Product description

In this Kit (7 Feet 1" Rope) you get enough fiberglass rope and silicone to do most popular Heatmor models. Measure your stove, some my require more than one kit.

User questions & answers

Product description

Specifications:

Voltage:110V

Phase: 1

Frequency: 50HZ

Input Current: 1.10A

Input Power: 120W

Speed: 2600r/min

Air Volume: 196CFM (5.5m³/min)

Static Pressure: 350Pa

Noise: 72db(A)

Capa-Citance: 8.0/500μF/V

Weight: 2.5kg

• The fan features compact structure, light weight, small volume, high efficiency, large air volume and high air pressure.
• Customers can install in different positions by changing the way the mounting bracket is assembled.
• This fan can be widely used in extruder heat dissipation, kitchen equipment, electronic equipment, duct ventilation, aeration model, purification equipment, telecommunications and other fields.
• All copper wire, durable, stable, high air volume.

Product description

Referred to as part #4184 OR #443 by CB.

• Dormeyer 2005-M-1, Dayton 4X240 Laminated Solenoid
• Constructed of durable laminated steel with corrosion-resistant frame and plunger.
• Stroke Range: 1/8 to 1" 120VAC Coil Volts,
• Guardian 18-C-120

User questions & answers

Product description

AmTech300. Offers 2 levels of protection- 2 Active Ingredients. AmTech 300 will protect your wood boiler from rust, corrosion, and scale. As well as balance pH and alkalinity. Our product has been designed to meet or exceed all boiler manufacturer nitrite warranty requirements. Don't pay the Premium price tag for other manufacturers products. One gallon of AmTech300 will treat 300 gallons of boiler fill water and maintain 1000ppm nitrite level. Suggested nitrite levels are: 750ppm = Adequate, 1000 ppm = Good, 1500 ppm = Great. However, dose system accordingly on required control levels set by your boiler manufacturer and your system's nitrite need based on test results. 300Test Kit. This kit includes a do it yourself test kit so you can determine the needs of your system. The test kit is designed to test the Nitrite levels in your boiler fill water. So, Test Nitrite levels easily and accurately just like the lab! This product works on all Outdoor Wood Boilers and Furnaces. *Best to increase dosage if... - Fill water is high in iron - Fill water pH is low - System temp is maintained above 160 degree F - Frequent water additions due to evaporative loss - Fill water has high dissolved solids . Commonly used on Central Boiler, Aquatherm, WoodMaster, Cozeburn, Empyre, Freedom, Hardy, Hawken, Heatmaster, Heatmor, Natures Comfort, Ozark, Polar, Sequoyah, Shaver, Taylor, Wood Doctor, Mahoning, Aspen to mention a Few. Also used in Steam Boilers, Hot water systems and closed loop as well as pressurized systems as well. Indoor, outdoor and outside boilers, and furnaces are fine as well. Wood Gasification units, Pellet Boilers, Coal boilers, and Furnaces and so much more. We recommend changing yearly to ensure the highest anti-corrosion protection.

• This kit was designed to protect your Outdoor Wood Boiler Stove investment.
• It provides you with ability to protect your wood boiler from rust, corrosion, and scale. Meets or exceeds all boiler manufacturer nitrite warranty requirements.
• Test Nitrite levels easily and accurately just like the lab!
• Kit allows you to keep the nitrites at optiminal level, Balance pH and Alkalinity levels

Product description

The ProTech 300 Boiler Water Treatment by Alternative Heating & Supplies Has been designed to be used in Manufacturers boiler treatment programs. These programs insist the wood boiler owners meet certain nitrite levels in order to comply with warranty requirements in regards to boiler corrosion protection. Adding 1 gallon of ProTech 300 to 300 gallons of boiler fill water will yield +/- 1000 ppm nitrite. The manufacturers can’t tell the difference if you're using their expensive brand or our ProTech 300, so send it into their labs to be tested without worry. This product works on all Outdoor Wood Boilers and Furnaces. Commonly used on Central Boiler, Aquatherm, WoodMaster, Cozeburn, Empyre, Freedom, Hardy, Hawken, Heatmaster, Heatmor, Natures Comfort, Ozark, Polar, Sequoyah, Shaver, Taylor, Wood Doctor, Mahoning, Aspen and MORE. The ProTech 300 Boiler Water Treatment is also used in Steam Boilers, Hot water systems and closed loop as well as pressurized systems as well. Indoor, outdoor and outside boilers and furnaces are fine as well. Wood Gasification units, Pellet boilers, Coal boilers and Furnaces and so much more. Alternative Heating & Supplies recommends changing yearly to ensure the highest anti-corrision protection. Our ProTech 300 Boiler Water Treatment works with Mild or Stainless Steel and helps prevent Rust and Scale corrosion. The Chemicals used are Nitrite based and are safe for the environment. ProTech 300 Test Kit - Test Nitrite levels easily and accurately just like the lab! This test kit is designed to provide an easy and accurate means to determine the level or amount of Nitrite in your system. Testing Nitrite on your own, ensures you are meeting manufacturer requirements. Proper chemical level within your system is essential to product performance and system protection. Test your water before you send it to the manufactures lab to ensure you get the full warranty on your unit.

• This kit was designed to protect your Outdoor Wood Boiler Stove investment.
• It provides you with ability to protect your wood boiler from rust, corrosion, and scale. Meets or exceeds all boiler manufacturer nitrite warranty requirements.
• Test Nitrite levels easily and accurately just like the lab!
• This kit allows you to keep the nitrites at optiminal level, Balance pH and Alkalinity levels

User questions & answers

Product description

Dynamically balanced blower mounts in any position and operates with minimal noise and vibration, to maintain cfm at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer service life. Ball bearings. Not for use with speed controllers.

User questions & answers

Product features

Dayton Rectangular Permanent Split Capacitor OEM Specialty Blower

Dynamically balanced blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. Open motor has cast-aluminum end shields for greater heat dissipation, resulting in less downtime and longer service life. Ball bearings. Not for use with speed controllers.

Dayton PSC and Shaded Pole Blowers

Many jurisdictions and localities have codes and regulations governing sales, construction, installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While Dayton attempts to assure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible for how the product is installed or used. Before purchase and use of a product, review the product applications, and all applicable national and local codes and regulations, and be sure that the product, installation, and use will comply with them.

OEM Blowers

The blowers are exact replacements for many OEM blowers with the same physical footprint. Forward curve wheels driven by Dayton motors are rated for continuous duty with all-position mount. These units incorporate balanced ball or sleeve-bearing motors with cast aluminum end shields. This provides greater heat dissipation and protection, reducing down time due to component failure and accidental damage. Direct drive blower wheels are dynamically balanced to reduce noise and vibration and to maintain CFM at higher static pressures.