14 best doorbell push button

Product description

667-1 Finish: Black Features: -Doorbell.-Surface mount.-Unlighted, narrow.-Package type: Carded. Dimensions: -Dimensions: 6" H x 2.75" W x 0.8-1" D.

From the Manufacturer

The 667-1 wired push button features a black finish with a white, unlighted center bar. This push button is mounted to the surface of your doorframe or exterior wall. It requires no additional holes to be drilled, and sits flush on the surface it is mounted to.

• Black finish
• Plastic
• Surface mount
• 1 year warranty
• Note: There are no wires included with the push button
• Low Voltage Hardwired Push Button
• Black Finish with White Center Bar

User questions & answers

Question:	Is this flat on the back side? Or does the button portion have a little space to lay the wiring in it
Answer:	1 light in the pack. SKU BT1W-20 has 20 pieces in the pack.
Question:	Is the button more clear than white? The one I received is definitely clear-colored and not white like advetised
Answer:	It does not have a sensor for nighttime. The light is constantly on. The soft glow is not noticeable in the daytime, but illuminates clearly in the dark. The LED uses such a tiny tiny amount of energy, this is not a consideration.
Question:	can you use it for garage door opener
Answer:	Yes. And it is surface mount, not recessed.
Question:	x 3 x 6 inches? Really? and screws are 2 1/8 inches a part
Answer:	The existing holes in my opinion will be correct.

Product features

Wired Black Push Button

This Wired Non-lit Door Bell Push Button lets you know right away when guests are at the door.

Coordinate the button color and finish to match your existing door hardware.

Easy to install and compatible with all wired doorbell brands.

Enhance your home's entryway and welcome visitors.

Product description

Oil Rubbed Bronze Finish, Wired Push Button, Metal, LED Lighted, Surface Mount, 0.75"W x .625"D x 2.75"H.

• Oil Rubbed Bronze Finish
• Metal, Lighted, Surface Mount
• Dimensions: 0.75" w x 0.625" d x 2.75" h
• FCC and IC Certified: No, Warranty (Yrs): 1

User questions & answers

Question:	How far apart are the screws
Answer:	What do you mean by 4-1 cameras?
Question:	Is there an electrical connection mechanism that fits down into the surface of the wall or does the entire switch fit above the wall surface
Answer:	Yes, you are correct, the total length is 400 feet. However, I personally would not even consider stringing them together like that. The reason is > the cables are way too small a gauge to run that way. As a matter of fact I found that these combination power/video cables were too small a gauge to use with cameras that have built-in night vision LEDs in them. The problem is that for my cameras in particular when those night vision LEDs come on at night the current draw through the cables increases to the point where the voltage at my power supply was 12v but by the time it got down the cable to the cameras it was only 8v and the cameras would not operate reliably at that low a voltage. What I did FOR MY PARTICULAR APPLICATION was to run a separate CAT5A wire (with four of the eight wires in the cable connected together for power and the other four for return) and RG6 coax for video. It's a lot more of a pain to do it that way, however, once installed I haven't given it any thought since. I hope that helped--these cables are a great idea, they just made them out of the wrong stuff IMHO.
Question:	Led? (please don't answer with an "i don't know". if you don't - just don't answer
Answer:	Yes they are included ...I didn't use them
Question:	I have an old door bell! Can i replace it with this one
Answer:	those are 60ft each

Product description

Representing the premier in performance and versatility, Honeywell's selection of Wireless Doorbell Push Buttons is easily accessible and easily installed. Compatible with Honeywell Series 3, 5 and 9 Wireless Doorbells, this Wireless Doorbell Push Button includes Feedback LED and Weather Resistant properties. A prolonged battery life of 5 years and Honeywell ActivLink bolster longevity and versatility.

• Wireless "E" compatibility
• Feedback LED
• Weather resistant
• Surface mount
• Honeywell ActivLInk

User questions & answers

Question:	Will this push button work with the honeywell rdwl917ax
Answer:	This is the correct push button.
Question:	How do i remove it from the mounting plate to replace battery
Answer:	At the base there is a small notch. Push the notch toward the wall (maybe use a small screwdriver) and slide the doorbell up.
Question:	Will this push button work with rcwl330a
Answer:	Yes, the Honeywell RPWL400W2000/A Wireless Doorbell Push Button is compatible with the Honeywell RCWL330A100/N Portable Wireless Door Chime.
Question:	can you use multiple buttons for one bell
Answer:	Connect a Push ButtonFollow these steps to change the ring and halo light color for an existingdoorbell, too.1. Press and hold the Setting buttonon the doorbell for three seconds.The halo light will circle.2. Press the push button.3. Within 12 seconds of pressingthe push button, press the Musicbutton to select the ring for thatpush button.4. Within 12 seconds of pressing thepush button, press the Sunlightbutton to select a halo light colorfor that push button.Secret KnockYou can set up a Secret Knock that makes a different ring and halo light colorfor each push button. The Secret Knock is triggered by pressing the pushbutton quickly 3 times.1. Press the push button 3 times quickly.2. Within 12 seconds of pressing the push button, press the Music button toselect the ring for the Secret Knock.3. Within 12 seconds of pressing the push button, press the Sunlight buttonto select a halo light color for the Secret Knock.

Product features

Honeywell RPWL400W2000/A Series 3, 5, 9 Wireless Doorbell Push Button with Halo Light

Description:

A wireless doorbell push button doesn't get any easier than this. No tools, no wires, no fuss – it's ready to use within minutes. The halo light activates when pushed for ambient feedback. It's weather resistant and comes with a battery.

Product description

This vintage style doorbell is the perfect way to amaze your guests right at the front door. It features a Caliban design and a vintage-style PRESS on the top. Made from solid brass, the oil rubbed style finish further accentuates the vintage charm of this bell.

• SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON – Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home.
• PRODUCT DIMENSIONS – 2 5/8 inch in diameter
• WIRED DOORBELL PUSH BUTTON – This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.
• RECESS MOUNTING- A recess is required for all bell buttons. The size is 3/4 X 3/4 inches as shown in the image.
• EASY DIY INSTALLATION – Includes installation hardware such as high-quality screws (1 extra). For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware. Put a drop of oil on the screw tip, Insert and tighten the screw. Do not over torque the screw as it may break. The screws supplied are for wooden surfaces. For Metal surfaces other suitable screws must be used.

User questions & answers

Question:	Will this work with any existing wired inside "chimer" please? thanks
Answer:	There will be no fire and explosion, and only two batteries can be used in series at most, but we do not recommend this because if the batteries are short-circuited in series, it will accelerate the loss of the battery. In addition, the battery needs to be charged separately and cannot be charged in series, otherwise the battery will be easily damaged.
Question:	How far apart are the two screw holes
Answer:	Hello, If your Heet Ebow sustainer device is equipped with a 9V battery, then our Kratax 9V battery is definitely suitable for your sustainer device. You can confirm according to the shape of the battery, and you can see if the battery is marked "9V" words. Please feel free to contact me if have any future questions, thank you!
Question:	I bought the antique brass, but it so dark, it has virtually none of the highlights shown in picture. Can I polish the raised surfaces till it does
Answer:	Hello, do you mean the light keeps flashing between red and green after the battery is placed? Are all the lights like this? This may be because the battery is not properly placed. If it is due to a charger problem, please contact the seller for replacement. The red light indicates that the battery is charging, and the green light indicates that the battery is full or not yet placed.
Question:	Can this this unit be retrofitted with lighted button
Answer:	Yes 850 milliamp hour

Product description

Never miss a visitor with the Broan-NuTone Lighted Rectangular Pushbutton Doorbell! This satin nickel pushbutton perfectly matches any decor, making it a timeless addition to your front porch. This rectangular doorbell features a high-quality pushbutton with a U.V. Inhibitor touch pad surface that won't yellow in the sun and non-stick action for reliable use. The lighted pushbutton increases visibility after dark so your visitors aren't spending their time searching for your doorbell. The surface mount design fits brick molding, allowing flexibility of surface installation choices for your convenience. The Broan-NuTone Lighted Rectangular Pushbutton Doorbell measures 0.75" x 1" x 2.88" and is the perfect addition to your home.

From the Manufacturer

Because not all door chime pushbuttons are created equal. From surface mount to flush mount and polished brass to satin nickel and oil-rubbed bronze, NuTone's line of pushbuttons is specifically designed to meet your individual style and function needs. Ever notice how some of the best times are when you're at home with friends and family? Creating life's wonderful memories begins with a good first impression. There is no better way to make an impression than by greeting your guests with the elegant sound and style of a NuTone door chime. Nothing completes a home like a NuTone door chime. NuTone offers the perfect combination of function, style and sound. With traditional chimes, decorative chimes, paintable chimes and complete door chime kits - NuTone offers something for everyone NuTone is the right choice in chimes and pushbuttons - from Contemporary to Traditional styles, musical, portable chimes or wireless - the choice is yours. With a tradition of fashion and quality that dates back to 1936, NuTone continually researches and develops innovative new products and is the market leader in new technologies. As the inventor of the door chime, the NuTone name is synonymous with door chimes. NuTone is America's leading brand of residential built-in convenience products including door chimes, central vacuum systems, intercom systems, home theater speakers, medicine cabinets, ceiling fans, ironing centers and ventilation fan. Popular global and domestic design trends are applied to all NuTone products so you can benefit from the most current styles.

• PUSHBUTTON DOORBELL: Pushbutton doorbell with a U.V. Inhibitor touch pad surface that won't yellow in the sun and non-stick action for years of quality use
• CLASSIC STYLE: Rectangular-shaped doorbell with a satin nickel finish is perfect for greeting your guests
• LIGHT INCLUDED: Lighted pushbutton provides visibility after dark so visitors are never left searching for the doorbell
• DURABLE: Weather-resistant finish provides years of dependable, high-quality service
• EASY INSTALLATION: Surface mount design fits brick molding, allowing flexibility of surface installation choices for your convenience

User questions & answers

Question:	Could you please tell me the distance between the two screws
Answer:	This is wired and flat on the back so it fits flush with our brick........it's the most beautiful doorbell in the subdivision!!!!
Question:	Can this be used on an outdoor gate in order for it to ring inside the house
Answer:	I don't know. All I know is, I had a builder grade doorbell, and I purchased this one online. I turned off the breaker, unscrewed the builder grade doorbell and wiring and installed the new door bell using the original wiring. Quick, easy and worked like a charm.
Question:	What is the center to center measurment on the screws? Thanks
Answer:	This is a push button for a door chime system. To complete the chime system, you will need to purchase the chime (sound mechanism) and transformer separately.
Question:	Is there a diode that will continue to send electricity to the chimes even after releasing the button, allowing the chimes to complete the tune
Answer:	It will only work with wired chime system.

Product features

NuTone PB7LSN Lighted Rectangular Pushbutton, Satin Nickel

This doorbell features a quality pushbutton with a U.V. Inhibitor touch pad surface that won’t yellow in the sun and non-stick action for a lifetime of service. All with a design and style that reflects your personality.

Greet your guests in style

First impressions mean everything, and there is no better way to make an impression than by greeting guests with the elegant sound and style of a wired NuTone door chime. Impress your guests without ever having to worry about changing the batteries.

A chime is a unique statement of personality. With ultimate versatility, NuTone’s chimes accent any design in a home, whether it’s timeless simplicity, contemporary sophistication, or classic style.

Product description

Can be used as a replacement or an upgrade to your current wired push button. The surface mount stands out more and is easier to install. Features solid metal push button with satin nickel finish. Setup is simple and easy. Finish: Nickel Metal Setup is simple and easy Lighted Surface mount Dimensions: 0.75" (W) x 0.625" (D) x 2.75" (H).

• Satin nickel
• Lighted push button
• Surface mount push button
• Use a low voltage system with 16 volt/10 watt transformer wired doorbell
• Mounting screws included

User questions & answers

Question:	Does this push button resist rain and sun ?-Florida
Answer:	Just give us a call at 1-800-858-8501 and we will help with that.
Question:	Is this made of metal or plastic
Answer:	I bought some other items on that order so I paid $1.91 each, but I would not advise buying any more of them as they burned out within 6 weeks of installation. I would not recommend buying any doorbell products from Heath Zenith as I have their doorbell, transformer, and button and they keep burning out in a short period of time and according to them it is my fault.
Question:	Is this really 6" long? I'm needing 5 1/2" at least and one of the reviews says it was only 3" when they received it
Answer:	These are not LED.
Question:	What is the center to center measurement between the two screws
Answer:	2 and 1/8 inches

Product description

925-C Features: -Push button.-Material: Metal.-Low voltage hardwired.-Lighted recessed mount.-0.625" Hole required for installation.-Compatible with any low voltage chime system. Color/Finish: -Antique brass finish. Dimensions: -Overall dimensions: 3.5" H x 1" W x 1.25" D.-Product weight: 0.08 lbs. Warranty: -Manufacturer provides 1 year warranty.

This is a decorative and elegant push button for use with hardwired doorbells. The recessed-mount design gives it a low profile, and the lighted button means no fumbling in the dark.--Josh Dettweiler

What's in the Box

Push button, hardware kit

From the Manufacturer

The Heath Zenith 925 wired push button features an antique brass finish and lighted insert. This push button has a portion that must recess into the surface it is mounted to. It requires a 5/8-Inch (or 16mm) diameter hole to be mounted properly. The plate of this push button sits flush on the surface, while the back portion of the push button recesses into the hole.

• Low voltage hardwired push button
• Antique Brass finish
• Lighted - Recessed Mount (.625-Inch hole required for installation)
• Works with any Heath Zenith low voltage chime system
• 1-Year warranty

User questions & answers

Question:	Does it have a door bell tune
Answer:	I don't vape. But if it fits the device and the device takes 3.7 volts dc, then it should work. Read your instructions
Question:	What is the correct distance between the two screws (center to center of screws
Answer:	Yes, very much so. Bigger around, longer and much higher voltage.
Question:	Are these still using an antiquated incandescent bulb that can't be replaced? Thanks
Answer:	This is a button top battery. See if your current 18500 batteries are flat top or button top. If they are button top these will work.
Question:	What is the overall size of this item and the distance between the mounting screw holes
Answer:	These are about twice the capacity of the original cells, but they will fit and function. I suggest you fully charge them before replacing, as I doubt the SOLAR cells installed will be able to fully charge them. At least you start with full voltage.

Product description

The GE Direct Wire Doorbell Push Button Replacement replaces your old or broken in minutes. The easy to install push button requires wiring and includes installation instructions. NOTE: This button is not for use on systems that exceed 24V and is not compatible with GE wireless door chimes. GE Direct Wire Doorbell Push Button Replacement is backed by a 90-day limited .

• Do-It-Yourself – This doorbell button is easy to install and ready to use with the included instructions
• Repair and Replace – Perfect for replacing old, worn out or broken doorbells in your home
• Compatibility – This push button works with all standard direct wire doorbell brands
• Power Rating – Not for use on systems that exceed 24 volts
• Worry-Free – The Direct Wire Push Button is backed by a 90-day limited

User questions & answers

Question:	Is this doorbell lighted
Answer:	The existing holes in my opinion will be correct.

Product description

Always know when your guests arrive with a GE Wireless Doorbell Kit. The battery-operated chime pairs with up to four wireless push buttons and features two melodies. For additional personalization, adjust the sound level using four volume settings for up to 150ft range. Each push button includes a CR2032 battery and the doorbell operates using three AA batteries (not included). The provided mounting hardware makes installing the system quick and easy. Give your visitors a warm welcome with a GE Wireless Doorbell Kit.

• Never Miss a Visitor – Always know when your guests arrive with the white version of the Battery-Operated GE Wireless Doorbell Kit
• Classic Style – Match your outdoor home decor with a classic doorbell look that comes in white
• Included in Package – One battery-operated receiver (150 ft. range) and one push button with one CR2032 battery and mounting hardware
• Easy Installation – The push button comes already paired with the receiver and mounting instructions are included for both the push button and receiver, which operates using three AA batteries (not included)
• Melody Selection – Choose from 4 different volume options and 2 different melodies including ding dong and Westminster

User questions & answers

Question:	There's conflicting information about what batteries this needs -- cr2, c, and/or aa? thanks
Answer:	This product is not waterproof.
Question:	what how big is the chime box
Answer:	Hi L. Crouch, thank you for your question. No, our GE Wireless Doorbell Kit does not require wifi to function. If you have any further questions, please don’t hesitate to respond or give us a call between the hours of 7:00 AM – 8:00 PM Central Standard Time, Monday thru Friday at 1-800-654-8483. Thank you.
Question:	is button you push waterproof or at least rain resistant
Answer:	N/a
Question:	Does this need wifi
Answer:	Battery is a CR17345 Lithium 3V. Comes with the sensor

Product features

About us

Our vast and valuable installed base across aviation, power, healthcare and renewable energy keeps us intimately involved in the daily operations of our customers. GE is proud to serve as true partners in growth and development - offering resources and experience, investing in local talent and supply chains, and bringing other partners along with us.

Product description

Features:

Classic square shape has a minimalist look and a modern feel to reflect your personality.

The sturdy and durable surface will give you many years of dependable service.

This door release button features a quality push button. It is a reset push button with a flexible feel. It can be used for controlling the door release.

It can be used for any access control application and is commonly used in offices, banks, gas stations, department stores and many more.



Specifications:

Material: Stainless Steel

Voltage: 36VDC

Size: 115mm x 70mm x 28mm / 4.53" x 2.76" x 1.1"(L*W*H)

Mounting Hole Distance: 83mm / 3.27"

Cord Length: 200mm / 7.87"

Output Contact: NO/NC/COM



Package Contents:

1 x Door Release Button

• Serial Design - panel with different style. The switch is in a wide selection of designs for each.
• Surface treatment process - the surface is brushed with stainless steel with a comfortable feel.
• High quality anti-deformation spring - stable, sturdy and durable.
• Automatic reset design - the trigger is automatic reset. After the finger is removed, the relay restores its original state.
• Application - It can be installed on or beside the door. Push the button and release the door for Exit.

Product description

Add a decorative touch to your home's exterior with this beautifully designed doorbell. It features a leaf and vine design with a smooth center. The durable and maintenance free black powder coat finish further accentuates the vintage element of this doorbell whilst ensuring its longevity

• SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home. It features a vintage detailing and a distinctive Black Powder Coat finish.
• PRODUCT DIMENSIONS - Length: 3 3/4", Height: 3 3/4"
• WIRED DOORBELL PUSH BUTTON - This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.
• RECESS MOUNTING- A recess is required for all bell buttons. The size is 3/4 X 3/4 inches as shown in the image.
• EASY DIY INSTALLATION - Includes installation hardware such as high-quality screws (1 extra). For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware. Put a drop of oil on the screw tip Insert and tighten the screw. Do not over torque the screw as it may break. The screws supplied are for wooden surfaces. For Metal surfaces other suitable screws must be used.

User questions & answers

Question:	Is it easy to replace the button with a lighted button
Answer:	It should work with any doorbell that has two wires. To quickly check whether it will work with yours, unscrew your old push button and move it away from the wall. Take a short piece of wire with a bit of insulation stripped off of each end, and touch one end to each terminal on the old push button. If the doorbell chimes, the new push button will work.
Question:	Is this a surface or flush mount doorbell
Answer:	By my "non-professional" measurements, they appear to be about 1 and 3/4 inches.
Question:	can the button be replaced with lighted one
Answer:	I wanted my doorbell dark but I did use very fine sandpaper to bring out brass highlights. Looks great!
Question:	What is the distance between mounting screws
Answer:	The button does come off, so yes if you have the correct size.

Product description

715W-1-B Finish: White Features: -Doorbell.-Surface mount.-Lighted, narrow.-Package type: Carded. Dimensions: -Dimensions: 6" H x 2.75" W X 1" D.

From the Manufacturer

The Heath Zenith 715W-1 wired push button features a white finish with a white, lighted center bar. This push button is mounted to the surface of your doorframe or exterior wall. It requires no additional holes to be drilled, and sits flush on the surface it is mounted to.

• White Finish
• Plastic
• Lighted
• Surface Mount
• 1 year warranty
• Low voltage hardwired push button
• White finish with white center bar

User questions & answers

Question:	I am looking for a doorbell button that has the Screw holes 2" on center. Replacing a button that is on brick and do not want to drill more holes
Answer:	While the overall diameter is 3/4 inch, the hole diameter is 5/8 inch.
Question:	Can this be used to operate an old (80s or 90s) garage door opener
Answer:	1 light in the pack. SKU BT1W-20 has 20 pieces in the pack.
Question:	Turn iff electricity
Answer:	It does not have a sensor for nighttime. The light is constantly on. The soft glow is not noticeable in the daytime, but illuminates clearly in the dark. The LED uses such a tiny tiny amount of energy, this is not a consideration.
Question:	Some say it's 2.5 and some say 3". which is it? my current button is 3" and i want one of the same size so i don't have to re-pain around it. thanks
Answer:	Yes. And it is surface mount, not recessed.

Product description

NuTone provides a wide selection of Pushbutton Doorbells and this one is no exception! This doorbell features a quality pushbutton with a U.V. Inhibitor touch pad surface that won't yellow in the sun and non-stick action for a lifetime of service. All with a design and style that reflects your personality! Standard unlit pushbutton with non-stick action will ensure you don't miss an important visitor. Classic round shape has a minimalist look and a modern feel to reflect your personality. The weather resistant Polished Brass finish will give you many years of dependable service. Recess mount design fits stucco surfaces and brick molding, allowing you flexibility of surface installation choices.

From the Manufacturer

Because not all door chime pushbuttons are created equal. From surface mount to flush mount and polished brass to satin nickel and oil-rubbed bronze, NuTone's line of pushbuttons is specifically designed to meet your individual style and function needs. Ever notice how some of the best times are when you're at home with friends and family? Creating life's wonderful memories begins with a good first impression. There is no better way to make an impression than by greeting your guests with the elegant sound and style of a NuTone door chime. Nothing completes a home like a NuTone door chime. NuTone offers the perfect combination of function, style and sound. With traditional chimes, decorative chimes, paintable chimes and complete door chime kits - NuTone offers something for everyone NuTone is the right choice in chimes and pushbuttons - from Contemporary to Traditional styles, musical, portable chimes or wireless - the choice is yours. With a tradition of fashion and quality that dates back to 1936, NuTone continually researches and develops innovative new products and is the market leader in new technologies. As the inventor of the door chime, the NuTone name is synonymous with door chimes. NuTone is America's leading brand of residential built-in convenience products including door chimes, central vacuum systems, intercom systems, home theater speakers, medicine cabinets, ceiling fans, ironing centers and ventilation fan. Popular global and domestic design trends are applied to all NuTone products so you can benefit from the most current styles.

• Lighted pushbutton
• Polished Brass stucco finish
• Model number PB41LBGL
• Dimensions: 2 1/2-Inch Round
• NuTone push buttons are available in satin nickel, polished brass, oil-rubbed bronze, antique brass, black, gold, white, and chrome finishes, and in a wide selection of designs for each

User questions & answers

Question:	how to order the satin nickel version
Answer:	There are 2 very small screws on the back for attaching wires. Yes, clips hold the button on the wall.
Question:	Do you have to have a nutone kit? all i want is the button to replace a very old one. i don't know what brand it is
Answer:	Yes. It will fit.
Question:	Are the monting tabs metal or plastic
Answer:	It would be easier to replace the whole doorbell button for $9.99
Question:	I dont' think the voltage specifed in the product details is correct. It says 120 volt. Did you mean 16 volt which is what the transformer puts out
Answer:	Yes, 7.1 inches is the overall diameter. 2.8 inches is the button size. And, 0.2 inches is the thickness at the outer most edge of the plate. It being somewhat thicker in the middle.

Product description

>IRON DOORBELL PUSH BUTTON Black Powder Coat Finish Wired Iron Doorbell Chime Push Button Vintage Decorative Door Bell with Easy Installation



SUPERIOR QUALITY DECORATIVE IRON DOORBELL BUTTON - Add quality and style to your entryway with this solid iron construction antique doorbell button.



PRODUCT DIMENSIONS - Height 2 1/2 inch Length 2 1/2 inch width 1/2 inch



WIRED DOORBELL PUSH BUTTON: The door bell push button needs to be connected to the house wiring.



FINISHED PRODUCT - The doorbell chime features a vintage detailing and a distinctive Black powdered Coat finish.



EASY DIY INSTALLATION - Includes installation hardware such as high-quality screws (1 extra). For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware. Put a few drop of oil on screw thread. Insert and tighten the screw. Do not over torque the screw as it may break. The screws supplied are for wooden surfaces. For Metal surfaces other suitable screws must be used.





ABOUT THE MANUFACTURER



A29 offers premium quality handcrafted products for your home & office. Express your personal style with the coordinating hardware for the kitchen, bathroom, bedroom, living room and the rest of your home/office. A29 is the ultimate, time-tested source for your hardware and home decor needs. We guarantee your satisfaction through years of experience of serving customers across the globe.



We strive hard to provide you superior value and service; and are committed to your total satisfaction. If you have any questions about your order, please feel free to contact us and we will get back to you with a response within 24 hours.

• SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home. It features a vintage detailing and a distinctive Black Powder Coat finish.
• PRODUCT DIMENSIONS – Height 2 1/2 inch Length 2 1/2 inch width 1/2 inch
• Heavy Cast Iron Exclusive Black powder Coat -By-Hand Finish
• WIRED DOORBELL PUSH BUTTON - This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.
• RECESS MOUNTING- A recess is required for all bell buttons. The size is 3/4 X 3/4 inches as shown in the image. EASY DIY INSTALLATION - Includes installation hardware such as high-quality screws (1 extra). For fixing screws on any wooden surface, mark and drill pilot holes with a drill bit appropriate for the mounting hardware.Put a few drops of oil on the screw thread. Insert and tighten the screw. Do not over torque the screw as it may break. The screws supplied are for wooden surfaces.

User questions & answers

Question:	Does any part of this door bell ringer button light up at night for easy visibility
Answer:	This is a simple button that closes the electrical circuit. Any tune or bell tone would depend on the type of chime you purchased. What you have here is one component of the system.
Question:	Is this a flush mount? I need the backside to be flat
Answer:	Mine measures about 2.1" c-to-c.
Question:	How far apart are the screws
Answer:	The push button does use an incandescent bulb but the center button can be replaced
Question:	Can this be installed on a stucco wall? Thx
Answer:	Holes are 2 inches apart